| /* | 
 |  * drivers/char/watchdog/ixp2000_wdt.c | 
 |  * | 
 |  * Watchdog driver for Intel IXP2000 network processors | 
 |  * | 
 |  * Adapted from the IXP4xx watchdog driver by Lennert Buytenhek. | 
 |  * The original version carries these notices: | 
 |  * | 
 |  * Author: Deepak Saxena <dsaxena@plexity.net> | 
 |  * | 
 |  * Copyright 2004 (c) MontaVista, Software, Inc. | 
 |  * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu> | 
 |  * | 
 |  * This file is licensed under  the terms of the GNU General Public | 
 |  * License version 2. This program is licensed "as is" without any | 
 |  * warranty of any kind, whether express or implied. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/init.h> | 
 | #include <linux/bitops.h> | 
 |  | 
 | #include <asm/hardware.h> | 
 | #include <asm/uaccess.h> | 
 |  | 
 | static int nowayout = WATCHDOG_NOWAYOUT; | 
 | static unsigned int heartbeat = 60;	/* (secs) Default is 1 minute */ | 
 | static unsigned long wdt_status; | 
 |  | 
 | #define	WDT_IN_USE		0 | 
 | #define	WDT_OK_TO_CLOSE		1 | 
 |  | 
 | static unsigned long wdt_tick_rate; | 
 |  | 
 | static void | 
 | wdt_enable(void) | 
 | { | 
 | 	ixp2000_reg_write(IXP2000_RESET0, *(IXP2000_RESET0) | WDT_RESET_ENABLE); | 
 | 	ixp2000_reg_write(IXP2000_TWDE, WDT_ENABLE); | 
 | 	ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); | 
 | 	ixp2000_reg_write(IXP2000_T4_CTL, TIMER_DIVIDER_256 | TIMER_ENABLE); | 
 | } | 
 |  | 
 | static void | 
 | wdt_disable(void) | 
 | { | 
 | 	ixp2000_reg_write(IXP2000_T4_CTL, 0); | 
 | } | 
 |  | 
 | static void | 
 | wdt_keepalive(void) | 
 | { | 
 | 	ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); | 
 | } | 
 |  | 
 | static int | 
 | ixp2000_wdt_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	if (test_and_set_bit(WDT_IN_USE, &wdt_status)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
 |  | 
 | 	wdt_enable(); | 
 |  | 
 | 	return nonseekable_open(inode, file); | 
 | } | 
 |  | 
 | static ssize_t | 
 | ixp2000_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) | 
 | { | 
 | 	if (len) { | 
 | 		if (!nowayout) { | 
 | 			size_t i; | 
 |  | 
 | 			clear_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
 |  | 
 | 			for (i = 0; i != len; i++) { | 
 | 				char c; | 
 |  | 
 | 				if (get_user(c, data + i)) | 
 | 					return -EFAULT; | 
 | 				if (c == 'V') | 
 | 					set_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
 | 			} | 
 | 		} | 
 | 		wdt_keepalive(); | 
 | 	} | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 |  | 
 | static struct watchdog_info ident = { | 
 | 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | | 
 | 				WDIOF_KEEPALIVEPING, | 
 | 	.identity	= "IXP2000 Watchdog", | 
 | }; | 
 |  | 
 | static int | 
 | ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, | 
 | 			unsigned long arg) | 
 | { | 
 | 	int ret = -ENOTTY; | 
 | 	int time; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case WDIOC_GETSUPPORT: | 
 | 		ret = copy_to_user((struct watchdog_info *)arg, &ident, | 
 | 				   sizeof(ident)) ? -EFAULT : 0; | 
 | 		break; | 
 |  | 
 | 	case WDIOC_GETSTATUS: | 
 | 		ret = put_user(0, (int *)arg); | 
 | 		break; | 
 |  | 
 | 	case WDIOC_GETBOOTSTATUS: | 
 | 		ret = put_user(0, (int *)arg); | 
 | 		break; | 
 |  | 
 | 	case WDIOC_SETTIMEOUT: | 
 | 		ret = get_user(time, (int *)arg); | 
 | 		if (ret) | 
 | 			break; | 
 |  | 
 | 		if (time <= 0 || time > 60) { | 
 | 			ret = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		heartbeat = time; | 
 | 		wdt_keepalive(); | 
 | 		/* Fall through */ | 
 |  | 
 | 	case WDIOC_GETTIMEOUT: | 
 | 		ret = put_user(heartbeat, (int *)arg); | 
 | 		break; | 
 |  | 
 | 	case WDIOC_KEEPALIVE: | 
 | 		wdt_enable(); | 
 | 		ret = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int | 
 | ixp2000_wdt_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { | 
 | 		wdt_disable(); | 
 | 	} else { | 
 | 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " | 
 | 					"timer will not stop\n"); | 
 | 	} | 
 |  | 
 | 	clear_bit(WDT_IN_USE, &wdt_status); | 
 | 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static const struct file_operations ixp2000_wdt_fops = | 
 | { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.write		= ixp2000_wdt_write, | 
 | 	.ioctl		= ixp2000_wdt_ioctl, | 
 | 	.open		= ixp2000_wdt_open, | 
 | 	.release	= ixp2000_wdt_release, | 
 | }; | 
 |  | 
 | static struct miscdevice ixp2000_wdt_miscdev = | 
 | { | 
 | 	.minor		= WATCHDOG_MINOR, | 
 | 	.name		= "watchdog", | 
 | 	.fops		= &ixp2000_wdt_fops, | 
 | }; | 
 |  | 
 | static int __init ixp2000_wdt_init(void) | 
 | { | 
 | 	if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { | 
 | 		printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256; | 
 |  | 
 | 	return misc_register(&ixp2000_wdt_miscdev); | 
 | } | 
 |  | 
 | static void __exit ixp2000_wdt_exit(void) | 
 | { | 
 | 	misc_deregister(&ixp2000_wdt_miscdev); | 
 | } | 
 |  | 
 | module_init(ixp2000_wdt_init); | 
 | module_exit(ixp2000_wdt_exit); | 
 |  | 
 | MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>"); | 
 | MODULE_DESCRIPTION("IXP2000 Network Processor Watchdog"); | 
 |  | 
 | module_param(heartbeat, int, 0); | 
 | MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); | 
 |  | 
 | module_param(nowayout, int, 0); | 
 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); | 
 |  |