| /* |
| * Fushicai USBTV007 Video Grabber Driver |
| * |
| * Product web site: |
| * http://www.fushicai.com/products_detail/&productId=d05449ee-b690-42f9-a661-aa7353894bed.html |
| * |
| * Following LWN articles were very useful in construction of this driver: |
| * Video4Linux2 API series: http://lwn.net/Articles/203924/ |
| * videobuf2 API explanation: http://lwn.net/Articles/447435/ |
| * Thanks go to Jonathan Corbet for providing this quality documentation. |
| * He is awesome. |
| * |
| * Copyright (c) 2013 Lubomir Rintel |
| * All rights reserved. |
| * No physical hardware was harmed running Windows during the |
| * reverse-engineering activity |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL"). |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/videodev2.h> |
| |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/videobuf2-core.h> |
| #include <media/videobuf2-vmalloc.h> |
| |
| /* Hardware. */ |
| #define USBTV_VIDEO_ENDP 0x81 |
| #define USBTV_BASE 0xc000 |
| #define USBTV_REQUEST_REG 12 |
| |
| /* Number of concurrent isochronous urbs submitted. |
| * Higher numbers was seen to overly saturate the USB bus. */ |
| #define USBTV_ISOC_TRANSFERS 16 |
| #define USBTV_ISOC_PACKETS 8 |
| |
| #define USBTV_CHUNK_SIZE 256 |
| #define USBTV_CHUNK 240 |
| |
| /* Chunk header. */ |
| #define USBTV_MAGIC_OK(chunk) ((be32_to_cpu(chunk[0]) & 0xff000000) \ |
| == 0x88000000) |
| #define USBTV_FRAME_ID(chunk) ((be32_to_cpu(chunk[0]) & 0x00ff0000) >> 16) |
| #define USBTV_ODD(chunk) ((be32_to_cpu(chunk[0]) & 0x0000f000) >> 15) |
| #define USBTV_CHUNK_NO(chunk) (be32_to_cpu(chunk[0]) & 0x00000fff) |
| |
| #define USBTV_TV_STD (V4L2_STD_525_60 | V4L2_STD_PAL) |
| |
| /* parameters for supported TV norms */ |
| struct usbtv_norm_params { |
| v4l2_std_id norm; |
| int cap_width, cap_height; |
| }; |
| |
| static struct usbtv_norm_params norm_params[] = { |
| { |
| .norm = V4L2_STD_525_60, |
| .cap_width = 720, |
| .cap_height = 480, |
| }, |
| { |
| .norm = V4L2_STD_PAL, |
| .cap_width = 720, |
| .cap_height = 576, |
| } |
| }; |
| |
| /* A single videobuf2 frame buffer. */ |
| struct usbtv_buf { |
| struct vb2_buffer vb; |
| struct list_head list; |
| }; |
| |
| /* Per-device structure. */ |
| struct usbtv { |
| struct device *dev; |
| struct usb_device *udev; |
| struct v4l2_device v4l2_dev; |
| struct video_device vdev; |
| struct vb2_queue vb2q; |
| struct mutex v4l2_lock; |
| struct mutex vb2q_lock; |
| |
| /* List of videobuf2 buffers protected by a lock. */ |
| spinlock_t buflock; |
| struct list_head bufs; |
| |
| /* Number of currently processed frame, useful find |
| * out when a new one begins. */ |
| u32 frame_id; |
| int chunks_done; |
| |
| enum { |
| USBTV_COMPOSITE_INPUT, |
| USBTV_SVIDEO_INPUT, |
| } input; |
| v4l2_std_id norm; |
| int width, height; |
| int n_chunks; |
| int iso_size; |
| unsigned int sequence; |
| struct urb *isoc_urbs[USBTV_ISOC_TRANSFERS]; |
| }; |
| |
| static int usbtv_configure_for_norm(struct usbtv *usbtv, v4l2_std_id norm) |
| { |
| int i, ret = 0; |
| struct usbtv_norm_params *params = NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(norm_params); i++) { |
| if (norm_params[i].norm & norm) { |
| params = &norm_params[i]; |
| break; |
| } |
| } |
| |
| if (params) { |
| usbtv->width = params->cap_width; |
| usbtv->height = params->cap_height; |
| usbtv->n_chunks = usbtv->width * usbtv->height |
| / 4 / USBTV_CHUNK; |
| usbtv->norm = params->norm; |
| } else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| static int usbtv_set_regs(struct usbtv *usbtv, const u16 regs[][2], int size) |
| { |
| int ret; |
| int pipe = usb_rcvctrlpipe(usbtv->udev, 0); |
| int i; |
| |
| for (i = 0; i < size; i++) { |
| u16 index = regs[i][0]; |
| u16 value = regs[i][1]; |
| |
| ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, index, NULL, 0, 0); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int usbtv_select_input(struct usbtv *usbtv, int input) |
| { |
| int ret; |
| |
| static const u16 composite[][2] = { |
| { USBTV_BASE + 0x0105, 0x0060 }, |
| { USBTV_BASE + 0x011f, 0x00f2 }, |
| { USBTV_BASE + 0x0127, 0x0060 }, |
| { USBTV_BASE + 0x00ae, 0x0010 }, |
| { USBTV_BASE + 0x0284, 0x00aa }, |
| { USBTV_BASE + 0x0239, 0x0060 }, |
| }; |
| |
| static const u16 svideo[][2] = { |
| { USBTV_BASE + 0x0105, 0x0010 }, |
| { USBTV_BASE + 0x011f, 0x00ff }, |
| { USBTV_BASE + 0x0127, 0x0060 }, |
| { USBTV_BASE + 0x00ae, 0x0030 }, |
| { USBTV_BASE + 0x0284, 0x0088 }, |
| { USBTV_BASE + 0x0239, 0x0060 }, |
| }; |
| |
| switch (input) { |
| case USBTV_COMPOSITE_INPUT: |
| ret = usbtv_set_regs(usbtv, composite, ARRAY_SIZE(composite)); |
| break; |
| case USBTV_SVIDEO_INPUT: |
| ret = usbtv_set_regs(usbtv, svideo, ARRAY_SIZE(svideo)); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| if (!ret) |
| usbtv->input = input; |
| |
| return ret; |
| } |
| |
| static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm) |
| { |
| int ret; |
| static const u16 pal[][2] = { |
| { USBTV_BASE + 0x001a, 0x0068 }, |
| { USBTV_BASE + 0x010e, 0x0072 }, |
| { USBTV_BASE + 0x010f, 0x00a2 }, |
| { USBTV_BASE + 0x0112, 0x00b0 }, |
| { USBTV_BASE + 0x0117, 0x0001 }, |
| { USBTV_BASE + 0x0118, 0x002c }, |
| { USBTV_BASE + 0x012d, 0x0010 }, |
| { USBTV_BASE + 0x012f, 0x0020 }, |
| { USBTV_BASE + 0x024f, 0x0002 }, |
| { USBTV_BASE + 0x0254, 0x0059 }, |
| { USBTV_BASE + 0x025a, 0x0016 }, |
| { USBTV_BASE + 0x025b, 0x0035 }, |
| { USBTV_BASE + 0x0263, 0x0017 }, |
| { USBTV_BASE + 0x0266, 0x0016 }, |
| { USBTV_BASE + 0x0267, 0x0036 } |
| }; |
| |
| static const u16 ntsc[][2] = { |
| { USBTV_BASE + 0x001a, 0x0079 }, |
| { USBTV_BASE + 0x010e, 0x0068 }, |
| { USBTV_BASE + 0x010f, 0x009c }, |
| { USBTV_BASE + 0x0112, 0x00f0 }, |
| { USBTV_BASE + 0x0117, 0x0000 }, |
| { USBTV_BASE + 0x0118, 0x00fc }, |
| { USBTV_BASE + 0x012d, 0x0004 }, |
| { USBTV_BASE + 0x012f, 0x0008 }, |
| { USBTV_BASE + 0x024f, 0x0001 }, |
| { USBTV_BASE + 0x0254, 0x005f }, |
| { USBTV_BASE + 0x025a, 0x0012 }, |
| { USBTV_BASE + 0x025b, 0x0001 }, |
| { USBTV_BASE + 0x0263, 0x001c }, |
| { USBTV_BASE + 0x0266, 0x0011 }, |
| { USBTV_BASE + 0x0267, 0x0005 } |
| }; |
| |
| ret = usbtv_configure_for_norm(usbtv, norm); |
| |
| if (!ret) { |
| if (norm & V4L2_STD_525_60) |
| ret = usbtv_set_regs(usbtv, ntsc, ARRAY_SIZE(ntsc)); |
| else if (norm & V4L2_STD_PAL) |
| ret = usbtv_set_regs(usbtv, pal, ARRAY_SIZE(pal)); |
| } |
| |
| return ret; |
| } |
| |
| static int usbtv_setup_capture(struct usbtv *usbtv) |
| { |
| int ret; |
| static const u16 setup[][2] = { |
| /* These seem to enable the device. */ |
| { USBTV_BASE + 0x0008, 0x0001 }, |
| { USBTV_BASE + 0x01d0, 0x00ff }, |
| { USBTV_BASE + 0x01d9, 0x0002 }, |
| |
| /* These seem to influence color parameters, such as |
| * brightness, etc. */ |
| { USBTV_BASE + 0x0239, 0x0040 }, |
| { USBTV_BASE + 0x0240, 0x0000 }, |
| { USBTV_BASE + 0x0241, 0x0000 }, |
| { USBTV_BASE + 0x0242, 0x0002 }, |
| { USBTV_BASE + 0x0243, 0x0080 }, |
| { USBTV_BASE + 0x0244, 0x0012 }, |
| { USBTV_BASE + 0x0245, 0x0090 }, |
| { USBTV_BASE + 0x0246, 0x0000 }, |
| |
| { USBTV_BASE + 0x0278, 0x002d }, |
| { USBTV_BASE + 0x0279, 0x000a }, |
| { USBTV_BASE + 0x027a, 0x0032 }, |
| { 0xf890, 0x000c }, |
| { 0xf894, 0x0086 }, |
| |
| { USBTV_BASE + 0x00ac, 0x00c0 }, |
| { USBTV_BASE + 0x00ad, 0x0000 }, |
| { USBTV_BASE + 0x00a2, 0x0012 }, |
| { USBTV_BASE + 0x00a3, 0x00e0 }, |
| { USBTV_BASE + 0x00a4, 0x0028 }, |
| { USBTV_BASE + 0x00a5, 0x0082 }, |
| { USBTV_BASE + 0x00a7, 0x0080 }, |
| { USBTV_BASE + 0x0000, 0x0014 }, |
| { USBTV_BASE + 0x0006, 0x0003 }, |
| { USBTV_BASE + 0x0090, 0x0099 }, |
| { USBTV_BASE + 0x0091, 0x0090 }, |
| { USBTV_BASE + 0x0094, 0x0068 }, |
| { USBTV_BASE + 0x0095, 0x0070 }, |
| { USBTV_BASE + 0x009c, 0x0030 }, |
| { USBTV_BASE + 0x009d, 0x00c0 }, |
| { USBTV_BASE + 0x009e, 0x00e0 }, |
| { USBTV_BASE + 0x0019, 0x0006 }, |
| { USBTV_BASE + 0x008c, 0x00ba }, |
| { USBTV_BASE + 0x0101, 0x00ff }, |
| { USBTV_BASE + 0x010c, 0x00b3 }, |
| { USBTV_BASE + 0x01b2, 0x0080 }, |
| { USBTV_BASE + 0x01b4, 0x00a0 }, |
| { USBTV_BASE + 0x014c, 0x00ff }, |
| { USBTV_BASE + 0x014d, 0x00ca }, |
| { USBTV_BASE + 0x0113, 0x0053 }, |
| { USBTV_BASE + 0x0119, 0x008a }, |
| { USBTV_BASE + 0x013c, 0x0003 }, |
| { USBTV_BASE + 0x0150, 0x009c }, |
| { USBTV_BASE + 0x0151, 0x0071 }, |
| { USBTV_BASE + 0x0152, 0x00c6 }, |
| { USBTV_BASE + 0x0153, 0x0084 }, |
| { USBTV_BASE + 0x0154, 0x00bc }, |
| { USBTV_BASE + 0x0155, 0x00a0 }, |
| { USBTV_BASE + 0x0156, 0x00a0 }, |
| { USBTV_BASE + 0x0157, 0x009c }, |
| { USBTV_BASE + 0x0158, 0x001f }, |
| { USBTV_BASE + 0x0159, 0x0006 }, |
| { USBTV_BASE + 0x015d, 0x0000 }, |
| |
| { USBTV_BASE + 0x0284, 0x0088 }, |
| { USBTV_BASE + 0x0003, 0x0004 }, |
| { USBTV_BASE + 0x0100, 0x00d3 }, |
| { USBTV_BASE + 0x0115, 0x0015 }, |
| { USBTV_BASE + 0x0220, 0x002e }, |
| { USBTV_BASE + 0x0225, 0x0008 }, |
| { USBTV_BASE + 0x024e, 0x0002 }, |
| { USBTV_BASE + 0x024e, 0x0002 }, |
| { USBTV_BASE + 0x024f, 0x0002 }, |
| }; |
| |
| ret = usbtv_set_regs(usbtv, setup, ARRAY_SIZE(setup)); |
| if (ret) |
| return ret; |
| |
| ret = usbtv_select_norm(usbtv, usbtv->norm); |
| if (ret) |
| return ret; |
| |
| ret = usbtv_select_input(usbtv, usbtv->input); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* Copy data from chunk into a frame buffer, deinterlacing the data |
| * into every second line. Unfortunately, they don't align nicely into |
| * 720 pixel lines, as the chunk is 240 words long, which is 480 pixels. |
| * Therefore, we break down the chunk into two halves before copyting, |
| * so that we can interleave a line if needed. */ |
| static void usbtv_chunk_to_vbuf(u32 *frame, u32 *src, int chunk_no, int odd) |
| { |
| int half; |
| |
| for (half = 0; half < 2; half++) { |
| int part_no = chunk_no * 2 + half; |
| int line = part_no / 3; |
| int part_index = (line * 2 + !odd) * 3 + (part_no % 3); |
| |
| u32 *dst = &frame[part_index * USBTV_CHUNK/2]; |
| memcpy(dst, src, USBTV_CHUNK/2 * sizeof(*src)); |
| src += USBTV_CHUNK/2; |
| } |
| } |
| |
| /* Called for each 256-byte image chunk. |
| * First word identifies the chunk, followed by 240 words of image |
| * data and padding. */ |
| static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) |
| { |
| int frame_id, odd, chunk_no; |
| u32 *frame; |
| struct usbtv_buf *buf; |
| unsigned long flags; |
| |
| /* Ignore corrupted lines. */ |
| if (!USBTV_MAGIC_OK(chunk)) |
| return; |
| frame_id = USBTV_FRAME_ID(chunk); |
| odd = USBTV_ODD(chunk); |
| chunk_no = USBTV_CHUNK_NO(chunk); |
| if (chunk_no >= usbtv->n_chunks) |
| return; |
| |
| /* Beginning of a frame. */ |
| if (chunk_no == 0) { |
| usbtv->frame_id = frame_id; |
| usbtv->chunks_done = 0; |
| } |
| |
| if (usbtv->frame_id != frame_id) |
| return; |
| |
| spin_lock_irqsave(&usbtv->buflock, flags); |
| if (list_empty(&usbtv->bufs)) { |
| /* No free buffers. Userspace likely too slow. */ |
| spin_unlock_irqrestore(&usbtv->buflock, flags); |
| return; |
| } |
| |
| /* First available buffer. */ |
| buf = list_first_entry(&usbtv->bufs, struct usbtv_buf, list); |
| frame = vb2_plane_vaddr(&buf->vb, 0); |
| |
| /* Copy the chunk data. */ |
| usbtv_chunk_to_vbuf(frame, &chunk[1], chunk_no, odd); |
| usbtv->chunks_done++; |
| |
| /* Last chunk in a frame, signalling an end */ |
| if (odd && chunk_no == usbtv->n_chunks-1) { |
| int size = vb2_plane_size(&buf->vb, 0); |
| enum vb2_buffer_state state = usbtv->chunks_done == |
| usbtv->n_chunks ? |
| VB2_BUF_STATE_DONE : |
| VB2_BUF_STATE_ERROR; |
| |
| buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; |
| buf->vb.v4l2_buf.sequence = usbtv->sequence++; |
| v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp); |
| vb2_set_plane_payload(&buf->vb, 0, size); |
| vb2_buffer_done(&buf->vb, state); |
| list_del(&buf->list); |
| } |
| |
| spin_unlock_irqrestore(&usbtv->buflock, flags); |
| } |
| |
| /* Got image data. Each packet contains a number of 256-word chunks we |
| * compose the image from. */ |
| static void usbtv_iso_cb(struct urb *ip) |
| { |
| int ret; |
| int i; |
| struct usbtv *usbtv = (struct usbtv *)ip->context; |
| |
| switch (ip->status) { |
| /* All fine. */ |
| case 0: |
| break; |
| /* Device disconnected or capture stopped? */ |
| case -ENODEV: |
| case -ENOENT: |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| return; |
| /* Unknown error. Retry. */ |
| default: |
| dev_warn(usbtv->dev, "Bad response for ISO request.\n"); |
| goto resubmit; |
| } |
| |
| for (i = 0; i < ip->number_of_packets; i++) { |
| int size = ip->iso_frame_desc[i].actual_length; |
| unsigned char *data = ip->transfer_buffer + |
| ip->iso_frame_desc[i].offset; |
| int offset; |
| |
| for (offset = 0; USBTV_CHUNK_SIZE * offset < size; offset++) |
| usbtv_image_chunk(usbtv, |
| (u32 *)&data[USBTV_CHUNK_SIZE * offset]); |
| } |
| |
| resubmit: |
| ret = usb_submit_urb(ip, GFP_ATOMIC); |
| if (ret < 0) |
| dev_warn(usbtv->dev, "Could not resubmit ISO URB\n"); |
| } |
| |
| static struct urb *usbtv_setup_iso_transfer(struct usbtv *usbtv) |
| { |
| struct urb *ip; |
| int size = usbtv->iso_size; |
| int i; |
| |
| ip = usb_alloc_urb(USBTV_ISOC_PACKETS, GFP_KERNEL); |
| if (ip == NULL) |
| return NULL; |
| |
| ip->dev = usbtv->udev; |
| ip->context = usbtv; |
| ip->pipe = usb_rcvisocpipe(usbtv->udev, USBTV_VIDEO_ENDP); |
| ip->interval = 1; |
| ip->transfer_flags = URB_ISO_ASAP; |
| ip->transfer_buffer = kzalloc(size * USBTV_ISOC_PACKETS, |
| GFP_KERNEL); |
| ip->complete = usbtv_iso_cb; |
| ip->number_of_packets = USBTV_ISOC_PACKETS; |
| ip->transfer_buffer_length = size * USBTV_ISOC_PACKETS; |
| for (i = 0; i < USBTV_ISOC_PACKETS; i++) { |
| ip->iso_frame_desc[i].offset = size * i; |
| ip->iso_frame_desc[i].length = size; |
| } |
| |
| return ip; |
| } |
| |
| static void usbtv_stop(struct usbtv *usbtv) |
| { |
| int i; |
| unsigned long flags; |
| |
| /* Cancel running transfers. */ |
| for (i = 0; i < USBTV_ISOC_TRANSFERS; i++) { |
| struct urb *ip = usbtv->isoc_urbs[i]; |
| if (ip == NULL) |
| continue; |
| usb_kill_urb(ip); |
| kfree(ip->transfer_buffer); |
| usb_free_urb(ip); |
| usbtv->isoc_urbs[i] = NULL; |
| } |
| |
| /* Return buffers to userspace. */ |
| spin_lock_irqsave(&usbtv->buflock, flags); |
| while (!list_empty(&usbtv->bufs)) { |
| struct usbtv_buf *buf = list_first_entry(&usbtv->bufs, |
| struct usbtv_buf, list); |
| vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); |
| list_del(&buf->list); |
| } |
| spin_unlock_irqrestore(&usbtv->buflock, flags); |
| } |
| |
| static int usbtv_start(struct usbtv *usbtv) |
| { |
| int i; |
| int ret; |
| |
| ret = usb_set_interface(usbtv->udev, 0, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbtv_setup_capture(usbtv); |
| if (ret < 0) |
| return ret; |
| |
| ret = usb_set_interface(usbtv->udev, 0, 1); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < USBTV_ISOC_TRANSFERS; i++) { |
| struct urb *ip; |
| |
| ip = usbtv_setup_iso_transfer(usbtv); |
| if (ip == NULL) { |
| ret = -ENOMEM; |
| goto start_fail; |
| } |
| usbtv->isoc_urbs[i] = ip; |
| |
| ret = usb_submit_urb(ip, GFP_KERNEL); |
| if (ret < 0) |
| goto start_fail; |
| } |
| |
| return 0; |
| |
| start_fail: |
| usbtv_stop(usbtv); |
| return ret; |
| } |
| |
| struct usb_device_id usbtv_id_table[] = { |
| { USB_DEVICE(0x1b71, 0x3002) }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, usbtv_id_table); |
| |
| static int usbtv_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct usbtv *dev = video_drvdata(file); |
| |
| strlcpy(cap->driver, "usbtv", sizeof(cap->driver)); |
| strlcpy(cap->card, "usbtv", sizeof(cap->card)); |
| usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE; |
| cap->device_caps |= V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static int usbtv_enum_input(struct file *file, void *priv, |
| struct v4l2_input *i) |
| { |
| struct usbtv *dev = video_drvdata(file); |
| |
| switch (i->index) { |
| case USBTV_COMPOSITE_INPUT: |
| strlcpy(i->name, "Composite", sizeof(i->name)); |
| break; |
| case USBTV_SVIDEO_INPUT: |
| strlcpy(i->name, "S-Video", sizeof(i->name)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| i->type = V4L2_INPUT_TYPE_CAMERA; |
| i->std = dev->vdev.tvnorms; |
| return 0; |
| } |
| |
| static int usbtv_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (f->index > 0) |
| return -EINVAL; |
| |
| strlcpy(f->description, "16 bpp YUY2, 4:2:2, packed", |
| sizeof(f->description)); |
| f->pixelformat = V4L2_PIX_FMT_YUYV; |
| return 0; |
| } |
| |
| static int usbtv_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct usbtv *usbtv = video_drvdata(file); |
| |
| f->fmt.pix.width = usbtv->width; |
| f->fmt.pix.height = usbtv->height; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| f->fmt.pix.bytesperline = usbtv->width * 2; |
| f->fmt.pix.sizeimage = (f->fmt.pix.bytesperline * f->fmt.pix.height); |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| |
| return 0; |
| } |
| |
| static int usbtv_g_std(struct file *file, void *priv, v4l2_std_id *norm) |
| { |
| struct usbtv *usbtv = video_drvdata(file); |
| *norm = usbtv->norm; |
| return 0; |
| } |
| |
| static int usbtv_s_std(struct file *file, void *priv, v4l2_std_id norm) |
| { |
| int ret = -EINVAL; |
| struct usbtv *usbtv = video_drvdata(file); |
| |
| if ((norm & V4L2_STD_525_60) || (norm & V4L2_STD_PAL)) |
| ret = usbtv_select_norm(usbtv, norm); |
| |
| return ret; |
| } |
| |
| static int usbtv_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct usbtv *usbtv = video_drvdata(file); |
| *i = usbtv->input; |
| return 0; |
| } |
| |
| static int usbtv_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| struct usbtv *usbtv = video_drvdata(file); |
| return usbtv_select_input(usbtv, i); |
| } |
| |
| struct v4l2_ioctl_ops usbtv_ioctl_ops = { |
| .vidioc_querycap = usbtv_querycap, |
| .vidioc_enum_input = usbtv_enum_input, |
| .vidioc_enum_fmt_vid_cap = usbtv_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = usbtv_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = usbtv_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = usbtv_fmt_vid_cap, |
| .vidioc_g_std = usbtv_g_std, |
| .vidioc_s_std = usbtv_s_std, |
| .vidioc_g_input = usbtv_g_input, |
| .vidioc_s_input = usbtv_s_input, |
| |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_prepare_buf = vb2_ioctl_prepare_buf, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| }; |
| |
| struct v4l2_file_operations usbtv_fops = { |
| .owner = THIS_MODULE, |
| .unlocked_ioctl = video_ioctl2, |
| .mmap = vb2_fop_mmap, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .read = vb2_fop_read, |
| .poll = vb2_fop_poll, |
| }; |
| |
| static int usbtv_queue_setup(struct vb2_queue *vq, |
| const struct v4l2_format *v4l_fmt, unsigned int *nbuffers, |
| unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct usbtv *usbtv = vb2_get_drv_priv(vq); |
| |
| if (*nbuffers < 2) |
| *nbuffers = 2; |
| *nplanes = 1; |
| sizes[0] = USBTV_CHUNK * usbtv->n_chunks * 2 * sizeof(u32); |
| |
| return 0; |
| } |
| |
| static void usbtv_buf_queue(struct vb2_buffer *vb) |
| { |
| struct usbtv *usbtv = vb2_get_drv_priv(vb->vb2_queue); |
| struct usbtv_buf *buf = container_of(vb, struct usbtv_buf, vb); |
| unsigned long flags; |
| |
| if (usbtv->udev == NULL) { |
| vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); |
| return; |
| } |
| |
| spin_lock_irqsave(&usbtv->buflock, flags); |
| list_add_tail(&buf->list, &usbtv->bufs); |
| spin_unlock_irqrestore(&usbtv->buflock, flags); |
| } |
| |
| static int usbtv_start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct usbtv *usbtv = vb2_get_drv_priv(vq); |
| |
| if (usbtv->udev == NULL) |
| return -ENODEV; |
| |
| return usbtv_start(usbtv); |
| } |
| |
| static int usbtv_stop_streaming(struct vb2_queue *vq) |
| { |
| struct usbtv *usbtv = vb2_get_drv_priv(vq); |
| |
| if (usbtv->udev == NULL) |
| return -ENODEV; |
| |
| usbtv_stop(usbtv); |
| return 0; |
| } |
| |
| struct vb2_ops usbtv_vb2_ops = { |
| .queue_setup = usbtv_queue_setup, |
| .buf_queue = usbtv_buf_queue, |
| .start_streaming = usbtv_start_streaming, |
| .stop_streaming = usbtv_stop_streaming, |
| }; |
| |
| static void usbtv_release(struct v4l2_device *v4l2_dev) |
| { |
| struct usbtv *usbtv = container_of(v4l2_dev, struct usbtv, v4l2_dev); |
| |
| v4l2_device_unregister(&usbtv->v4l2_dev); |
| vb2_queue_release(&usbtv->vb2q); |
| kfree(usbtv); |
| } |
| |
| static int usbtv_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| int ret; |
| int size; |
| struct device *dev = &intf->dev; |
| struct usbtv *usbtv; |
| |
| /* Checks that the device is what we think it is. */ |
| if (intf->num_altsetting != 2) |
| return -ENODEV; |
| if (intf->altsetting[1].desc.bNumEndpoints != 4) |
| return -ENODEV; |
| |
| /* Packet size is split into 11 bits of base size and count of |
| * extra multiplies of it.*/ |
| size = usb_endpoint_maxp(&intf->altsetting[1].endpoint[0].desc); |
| size = (size & 0x07ff) * (((size & 0x1800) >> 11) + 1); |
| |
| /* Device structure */ |
| usbtv = kzalloc(sizeof(struct usbtv), GFP_KERNEL); |
| if (usbtv == NULL) |
| return -ENOMEM; |
| usbtv->dev = dev; |
| usbtv->udev = usb_get_dev(interface_to_usbdev(intf)); |
| |
| usbtv->iso_size = size; |
| |
| (void)usbtv_configure_for_norm(usbtv, V4L2_STD_525_60); |
| |
| spin_lock_init(&usbtv->buflock); |
| mutex_init(&usbtv->v4l2_lock); |
| mutex_init(&usbtv->vb2q_lock); |
| INIT_LIST_HEAD(&usbtv->bufs); |
| |
| /* videobuf2 structure */ |
| usbtv->vb2q.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| usbtv->vb2q.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; |
| usbtv->vb2q.drv_priv = usbtv; |
| usbtv->vb2q.buf_struct_size = sizeof(struct usbtv_buf); |
| usbtv->vb2q.ops = &usbtv_vb2_ops; |
| usbtv->vb2q.mem_ops = &vb2_vmalloc_memops; |
| usbtv->vb2q.timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| usbtv->vb2q.lock = &usbtv->vb2q_lock; |
| ret = vb2_queue_init(&usbtv->vb2q); |
| if (ret < 0) { |
| dev_warn(dev, "Could not initialize videobuf2 queue\n"); |
| goto usbtv_fail; |
| } |
| |
| /* v4l2 structure */ |
| usbtv->v4l2_dev.release = usbtv_release; |
| ret = v4l2_device_register(dev, &usbtv->v4l2_dev); |
| if (ret < 0) { |
| dev_warn(dev, "Could not register v4l2 device\n"); |
| goto v4l2_fail; |
| } |
| |
| usb_set_intfdata(intf, usbtv); |
| |
| /* Video structure */ |
| strlcpy(usbtv->vdev.name, "usbtv", sizeof(usbtv->vdev.name)); |
| usbtv->vdev.v4l2_dev = &usbtv->v4l2_dev; |
| usbtv->vdev.release = video_device_release_empty; |
| usbtv->vdev.fops = &usbtv_fops; |
| usbtv->vdev.ioctl_ops = &usbtv_ioctl_ops; |
| usbtv->vdev.tvnorms = USBTV_TV_STD; |
| usbtv->vdev.queue = &usbtv->vb2q; |
| usbtv->vdev.lock = &usbtv->v4l2_lock; |
| set_bit(V4L2_FL_USE_FH_PRIO, &usbtv->vdev.flags); |
| video_set_drvdata(&usbtv->vdev, usbtv); |
| ret = video_register_device(&usbtv->vdev, VFL_TYPE_GRABBER, -1); |
| if (ret < 0) { |
| dev_warn(dev, "Could not register video device\n"); |
| goto vdev_fail; |
| } |
| |
| dev_info(dev, "Fushicai USBTV007 Video Grabber\n"); |
| return 0; |
| |
| vdev_fail: |
| v4l2_device_unregister(&usbtv->v4l2_dev); |
| v4l2_fail: |
| vb2_queue_release(&usbtv->vb2q); |
| usbtv_fail: |
| kfree(usbtv); |
| |
| return ret; |
| } |
| |
| static void usbtv_disconnect(struct usb_interface *intf) |
| { |
| struct usbtv *usbtv = usb_get_intfdata(intf); |
| |
| mutex_lock(&usbtv->vb2q_lock); |
| mutex_lock(&usbtv->v4l2_lock); |
| |
| usbtv_stop(usbtv); |
| usb_set_intfdata(intf, NULL); |
| video_unregister_device(&usbtv->vdev); |
| v4l2_device_disconnect(&usbtv->v4l2_dev); |
| usb_put_dev(usbtv->udev); |
| usbtv->udev = NULL; |
| |
| mutex_unlock(&usbtv->v4l2_lock); |
| mutex_unlock(&usbtv->vb2q_lock); |
| |
| v4l2_device_put(&usbtv->v4l2_dev); |
| } |
| |
| MODULE_AUTHOR("Lubomir Rintel"); |
| MODULE_DESCRIPTION("Fushicai USBTV007 Video Grabber Driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| |
| struct usb_driver usbtv_usb_driver = { |
| .name = "usbtv", |
| .id_table = usbtv_id_table, |
| .probe = usbtv_probe, |
| .disconnect = usbtv_disconnect, |
| }; |
| |
| module_usb_driver(usbtv_usb_driver); |