| /* |
| * xsave/xrstor support. |
| * |
| * Author: Suresh Siddha <suresh.b.siddha@intel.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/bootmem.h> |
| #include <linux/compat.h> |
| #include <asm/i387.h> |
| #include <asm/fpu-internal.h> |
| #include <asm/sigframe.h> |
| #include <asm/xcr.h> |
| |
| /* |
| * Supported feature mask by the CPU and the kernel. |
| */ |
| u64 pcntxt_mask; |
| |
| /* |
| * Represents init state for the supported extended state. |
| */ |
| struct xsave_struct *init_xstate_buf; |
| |
| static struct _fpx_sw_bytes fx_sw_reserved, fx_sw_reserved_ia32; |
| static unsigned int *xstate_offsets, *xstate_sizes, xstate_features; |
| |
| /* |
| * If a processor implementation discern that a processor state component is |
| * in its initialized state it may modify the corresponding bit in the |
| * xsave_hdr.xstate_bv as '0', with out modifying the corresponding memory |
| * layout in the case of xsaveopt. While presenting the xstate information to |
| * the user, we always ensure that the memory layout of a feature will be in |
| * the init state if the corresponding header bit is zero. This is to ensure |
| * that the user doesn't see some stale state in the memory layout during |
| * signal handling, debugging etc. |
| */ |
| void __sanitize_i387_state(struct task_struct *tsk) |
| { |
| struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave; |
| int feature_bit = 0x2; |
| u64 xstate_bv; |
| |
| if (!fx) |
| return; |
| |
| xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv; |
| |
| /* |
| * None of the feature bits are in init state. So nothing else |
| * to do for us, as the memory layout is up to date. |
| */ |
| if ((xstate_bv & pcntxt_mask) == pcntxt_mask) |
| return; |
| |
| /* |
| * FP is in init state |
| */ |
| if (!(xstate_bv & XSTATE_FP)) { |
| fx->cwd = 0x37f; |
| fx->swd = 0; |
| fx->twd = 0; |
| fx->fop = 0; |
| fx->rip = 0; |
| fx->rdp = 0; |
| memset(&fx->st_space[0], 0, 128); |
| } |
| |
| /* |
| * SSE is in init state |
| */ |
| if (!(xstate_bv & XSTATE_SSE)) |
| memset(&fx->xmm_space[0], 0, 256); |
| |
| xstate_bv = (pcntxt_mask & ~xstate_bv) >> 2; |
| |
| /* |
| * Update all the other memory layouts for which the corresponding |
| * header bit is in the init state. |
| */ |
| while (xstate_bv) { |
| if (xstate_bv & 0x1) { |
| int offset = xstate_offsets[feature_bit]; |
| int size = xstate_sizes[feature_bit]; |
| |
| memcpy(((void *) fx) + offset, |
| ((void *) init_xstate_buf) + offset, |
| size); |
| } |
| |
| xstate_bv >>= 1; |
| feature_bit++; |
| } |
| } |
| |
| /* |
| * Check for the presence of extended state information in the |
| * user fpstate pointer in the sigcontext. |
| */ |
| static inline int check_for_xstate(struct i387_fxsave_struct __user *buf, |
| void __user *fpstate, |
| struct _fpx_sw_bytes *fx_sw) |
| { |
| int min_xstate_size = sizeof(struct i387_fxsave_struct) + |
| sizeof(struct xsave_hdr_struct); |
| unsigned int magic2; |
| |
| if (__copy_from_user(fx_sw, &buf->sw_reserved[0], sizeof(*fx_sw))) |
| return -1; |
| |
| /* Check for the first magic field and other error scenarios. */ |
| if (fx_sw->magic1 != FP_XSTATE_MAGIC1 || |
| fx_sw->xstate_size < min_xstate_size || |
| fx_sw->xstate_size > xstate_size || |
| fx_sw->xstate_size > fx_sw->extended_size) |
| return -1; |
| |
| /* |
| * Check for the presence of second magic word at the end of memory |
| * layout. This detects the case where the user just copied the legacy |
| * fpstate layout with out copying the extended state information |
| * in the memory layout. |
| */ |
| if (__get_user(magic2, (__u32 __user *)(fpstate + fx_sw->xstate_size)) |
| || magic2 != FP_XSTATE_MAGIC2) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * Signal frame handlers. |
| */ |
| static inline int save_fsave_header(struct task_struct *tsk, void __user *buf) |
| { |
| if (use_fxsr()) { |
| struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave; |
| struct user_i387_ia32_struct env; |
| struct _fpstate_ia32 __user *fp = buf; |
| |
| convert_from_fxsr(&env, tsk); |
| |
| if (__copy_to_user(buf, &env, sizeof(env)) || |
| __put_user(xsave->i387.swd, &fp->status) || |
| __put_user(X86_FXSR_MAGIC, &fp->magic)) |
| return -1; |
| } else { |
| struct i387_fsave_struct __user *fp = buf; |
| u32 swd; |
| if (__get_user(swd, &fp->swd) || __put_user(swd, &fp->status)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static inline int save_xstate_epilog(void __user *buf, int ia32_frame) |
| { |
| struct xsave_struct __user *x = buf; |
| struct _fpx_sw_bytes *sw_bytes; |
| u32 xstate_bv; |
| int err; |
| |
| /* Setup the bytes not touched by the [f]xsave and reserved for SW. */ |
| sw_bytes = ia32_frame ? &fx_sw_reserved_ia32 : &fx_sw_reserved; |
| err = __copy_to_user(&x->i387.sw_reserved, sw_bytes, sizeof(*sw_bytes)); |
| |
| if (!use_xsave()) |
| return err; |
| |
| err |= __put_user(FP_XSTATE_MAGIC2, (__u32 *)(buf + xstate_size)); |
| |
| /* |
| * Read the xstate_bv which we copied (directly from the cpu or |
| * from the state in task struct) to the user buffers. |
| */ |
| err |= __get_user(xstate_bv, (__u32 *)&x->xsave_hdr.xstate_bv); |
| |
| /* |
| * For legacy compatible, we always set FP/SSE bits in the bit |
| * vector while saving the state to the user context. This will |
| * enable us capturing any changes(during sigreturn) to |
| * the FP/SSE bits by the legacy applications which don't touch |
| * xstate_bv in the xsave header. |
| * |
| * xsave aware apps can change the xstate_bv in the xsave |
| * header as well as change any contents in the memory layout. |
| * xrestore as part of sigreturn will capture all the changes. |
| */ |
| xstate_bv |= XSTATE_FPSSE; |
| |
| err |= __put_user(xstate_bv, (__u32 *)&x->xsave_hdr.xstate_bv); |
| |
| return err; |
| } |
| |
| static inline int save_user_xstate(struct xsave_struct __user *buf) |
| { |
| int err; |
| |
| if (use_xsave()) |
| err = xsave_user(buf); |
| else if (use_fxsr()) |
| err = fxsave_user((struct i387_fxsave_struct __user *) buf); |
| else |
| err = fsave_user((struct i387_fsave_struct __user *) buf); |
| |
| if (unlikely(err) && __clear_user(buf, xstate_size)) |
| err = -EFAULT; |
| return err; |
| } |
| |
| /* |
| * Save the fpu, extended register state to the user signal frame. |
| * |
| * 'buf_fx' is the 64-byte aligned pointer at which the [f|fx|x]save |
| * state is copied. |
| * 'buf' points to the 'buf_fx' or to the fsave header followed by 'buf_fx'. |
| * |
| * buf == buf_fx for 64-bit frames and 32-bit fsave frame. |
| * buf != buf_fx for 32-bit frames with fxstate. |
| * |
| * If the fpu, extended register state is live, save the state directly |
| * to the user frame pointed by the aligned pointer 'buf_fx'. Otherwise, |
| * copy the thread's fpu state to the user frame starting at 'buf_fx'. |
| * |
| * If this is a 32-bit frame with fxstate, put a fsave header before |
| * the aligned state at 'buf_fx'. |
| * |
| * For [f]xsave state, update the SW reserved fields in the [f]xsave frame |
| * indicating the absence/presence of the extended state to the user. |
| */ |
| int save_xstate_sig(void __user *buf, void __user *buf_fx, int size) |
| { |
| struct xsave_struct *xsave = ¤t->thread.fpu.state->xsave; |
| struct task_struct *tsk = current; |
| int ia32_fxstate = (buf != buf_fx); |
| |
| ia32_fxstate &= (config_enabled(CONFIG_X86_32) || |
| config_enabled(CONFIG_IA32_EMULATION)); |
| |
| if (!access_ok(VERIFY_WRITE, buf, size)) |
| return -EACCES; |
| |
| if (!static_cpu_has(X86_FEATURE_FPU)) |
| return fpregs_soft_get(current, NULL, 0, |
| sizeof(struct user_i387_ia32_struct), NULL, |
| (struct _fpstate_ia32 __user *) buf) ? -1 : 1; |
| |
| if (user_has_fpu()) { |
| /* Save the live register state to the user directly. */ |
| if (save_user_xstate(buf_fx)) |
| return -1; |
| /* Update the thread's fxstate to save the fsave header. */ |
| if (ia32_fxstate) |
| fpu_fxsave(&tsk->thread.fpu); |
| } else { |
| sanitize_i387_state(tsk); |
| if (__copy_to_user(buf_fx, xsave, xstate_size)) |
| return -1; |
| } |
| |
| /* Save the fsave header for the 32-bit frames. */ |
| if ((ia32_fxstate || !use_fxsr()) && save_fsave_header(tsk, buf)) |
| return -1; |
| |
| if (use_fxsr() && save_xstate_epilog(buf_fx, ia32_fxstate)) |
| return -1; |
| |
| drop_init_fpu(tsk); /* trigger finit */ |
| |
| return 0; |
| } |
| |
| static inline void |
| sanitize_restored_xstate(struct task_struct *tsk, |
| struct user_i387_ia32_struct *ia32_env, |
| u64 xstate_bv, int fx_only) |
| { |
| struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave; |
| struct xsave_hdr_struct *xsave_hdr = &xsave->xsave_hdr; |
| |
| if (use_xsave()) { |
| /* These bits must be zero. */ |
| xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0; |
| |
| /* |
| * Init the state that is not present in the memory |
| * layout and not enabled by the OS. |
| */ |
| if (fx_only) |
| xsave_hdr->xstate_bv = XSTATE_FPSSE; |
| else |
| xsave_hdr->xstate_bv &= (pcntxt_mask & xstate_bv); |
| } |
| |
| if (use_fxsr()) { |
| /* |
| * mscsr reserved bits must be masked to zero for security |
| * reasons. |
| */ |
| xsave->i387.mxcsr &= mxcsr_feature_mask; |
| |
| convert_to_fxsr(tsk, ia32_env); |
| } |
| } |
| |
| /* |
| * Restore the extended state if present. Otherwise, restore the FP/SSE state. |
| */ |
| static inline int restore_user_xstate(void __user *buf, u64 xbv, int fx_only) |
| { |
| if (use_xsave()) { |
| if ((unsigned long)buf % 64 || fx_only) { |
| u64 init_bv = pcntxt_mask & ~XSTATE_FPSSE; |
| xrstor_state(init_xstate_buf, init_bv); |
| return fxrstor_user(buf); |
| } else { |
| u64 init_bv = pcntxt_mask & ~xbv; |
| if (unlikely(init_bv)) |
| xrstor_state(init_xstate_buf, init_bv); |
| return xrestore_user(buf, xbv); |
| } |
| } else if (use_fxsr()) { |
| return fxrstor_user(buf); |
| } else |
| return frstor_user(buf); |
| } |
| |
| int __restore_xstate_sig(void __user *buf, void __user *buf_fx, int size) |
| { |
| int ia32_fxstate = (buf != buf_fx); |
| struct task_struct *tsk = current; |
| int state_size = xstate_size; |
| u64 xstate_bv = 0; |
| int fx_only = 0; |
| |
| ia32_fxstate &= (config_enabled(CONFIG_X86_32) || |
| config_enabled(CONFIG_IA32_EMULATION)); |
| |
| if (!buf) { |
| drop_init_fpu(tsk); |
| return 0; |
| } |
| |
| if (!access_ok(VERIFY_READ, buf, size)) |
| return -EACCES; |
| |
| if (!used_math() && init_fpu(tsk)) |
| return -1; |
| |
| if (!static_cpu_has(X86_FEATURE_FPU)) |
| return fpregs_soft_set(current, NULL, |
| 0, sizeof(struct user_i387_ia32_struct), |
| NULL, buf) != 0; |
| |
| if (use_xsave()) { |
| struct _fpx_sw_bytes fx_sw_user; |
| if (unlikely(check_for_xstate(buf_fx, buf_fx, &fx_sw_user))) { |
| /* |
| * Couldn't find the extended state information in the |
| * memory layout. Restore just the FP/SSE and init all |
| * the other extended state. |
| */ |
| state_size = sizeof(struct i387_fxsave_struct); |
| fx_only = 1; |
| } else { |
| state_size = fx_sw_user.xstate_size; |
| xstate_bv = fx_sw_user.xstate_bv; |
| } |
| } |
| |
| if (ia32_fxstate) { |
| /* |
| * For 32-bit frames with fxstate, copy the user state to the |
| * thread's fpu state, reconstruct fxstate from the fsave |
| * header. Sanitize the copied state etc. |
| */ |
| struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave; |
| struct user_i387_ia32_struct env; |
| int err = 0; |
| |
| /* |
| * Drop the current fpu which clears used_math(). This ensures |
| * that any context-switch during the copy of the new state, |
| * avoids the intermediate state from getting restored/saved. |
| * Thus avoiding the new restored state from getting corrupted. |
| * We will be ready to restore/save the state only after |
| * set_used_math() is again set. |
| */ |
| drop_fpu(tsk); |
| |
| if (__copy_from_user(xsave, buf_fx, state_size) || |
| __copy_from_user(&env, buf, sizeof(env))) { |
| err = -1; |
| } else { |
| sanitize_restored_xstate(tsk, &env, xstate_bv, fx_only); |
| set_used_math(); |
| } |
| |
| if (use_eager_fpu()) |
| math_state_restore(); |
| |
| return err; |
| } else { |
| /* |
| * For 64-bit frames and 32-bit fsave frames, restore the user |
| * state to the registers directly (with exceptions handled). |
| */ |
| user_fpu_begin(); |
| if (restore_user_xstate(buf_fx, xstate_bv, fx_only)) { |
| drop_init_fpu(tsk); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Prepare the SW reserved portion of the fxsave memory layout, indicating |
| * the presence of the extended state information in the memory layout |
| * pointed by the fpstate pointer in the sigcontext. |
| * This will be saved when ever the FP and extended state context is |
| * saved on the user stack during the signal handler delivery to the user. |
| */ |
| static void prepare_fx_sw_frame(void) |
| { |
| int fsave_header_size = sizeof(struct i387_fsave_struct); |
| int size = xstate_size + FP_XSTATE_MAGIC2_SIZE; |
| |
| if (config_enabled(CONFIG_X86_32)) |
| size += fsave_header_size; |
| |
| fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1; |
| fx_sw_reserved.extended_size = size; |
| fx_sw_reserved.xstate_bv = pcntxt_mask; |
| fx_sw_reserved.xstate_size = xstate_size; |
| |
| if (config_enabled(CONFIG_IA32_EMULATION)) { |
| fx_sw_reserved_ia32 = fx_sw_reserved; |
| fx_sw_reserved_ia32.extended_size += fsave_header_size; |
| } |
| } |
| |
| /* |
| * Enable the extended processor state save/restore feature |
| */ |
| static inline void xstate_enable(void) |
| { |
| set_in_cr4(X86_CR4_OSXSAVE); |
| xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask); |
| } |
| |
| /* |
| * Record the offsets and sizes of different state managed by the xsave |
| * memory layout. |
| */ |
| static void __init setup_xstate_features(void) |
| { |
| int eax, ebx, ecx, edx, leaf = 0x2; |
| |
| xstate_features = fls64(pcntxt_mask); |
| xstate_offsets = alloc_bootmem(xstate_features * sizeof(int)); |
| xstate_sizes = alloc_bootmem(xstate_features * sizeof(int)); |
| |
| do { |
| cpuid_count(XSTATE_CPUID, leaf, &eax, &ebx, &ecx, &edx); |
| |
| if (eax == 0) |
| break; |
| |
| xstate_offsets[leaf] = ebx; |
| xstate_sizes[leaf] = eax; |
| |
| leaf++; |
| } while (1); |
| } |
| |
| /* |
| * setup the xstate image representing the init state |
| */ |
| static void __init setup_init_fpu_buf(void) |
| { |
| /* |
| * Setup init_xstate_buf to represent the init state of |
| * all the features managed by the xsave |
| */ |
| init_xstate_buf = alloc_bootmem_align(xstate_size, |
| __alignof__(struct xsave_struct)); |
| fx_finit(&init_xstate_buf->i387); |
| |
| if (!cpu_has_xsave) |
| return; |
| |
| setup_xstate_features(); |
| |
| /* |
| * Init all the features state with header_bv being 0x0 |
| */ |
| xrstor_state(init_xstate_buf, -1); |
| /* |
| * Dump the init state again. This is to identify the init state |
| * of any feature which is not represented by all zero's. |
| */ |
| xsave_state(init_xstate_buf, -1); |
| } |
| |
| static enum { AUTO, ENABLE, DISABLE } eagerfpu = AUTO; |
| static int __init eager_fpu_setup(char *s) |
| { |
| if (!strcmp(s, "on")) |
| eagerfpu = ENABLE; |
| else if (!strcmp(s, "off")) |
| eagerfpu = DISABLE; |
| else if (!strcmp(s, "auto")) |
| eagerfpu = AUTO; |
| return 1; |
| } |
| __setup("eagerfpu=", eager_fpu_setup); |
| |
| /* |
| * Enable and initialize the xsave feature. |
| */ |
| static void __init xstate_enable_boot_cpu(void) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| if (boot_cpu_data.cpuid_level < XSTATE_CPUID) { |
| WARN(1, KERN_ERR "XSTATE_CPUID missing\n"); |
| return; |
| } |
| |
| cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx); |
| pcntxt_mask = eax + ((u64)edx << 32); |
| |
| if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) { |
| pr_err("FP/SSE not shown under xsave features 0x%llx\n", |
| pcntxt_mask); |
| BUG(); |
| } |
| |
| /* |
| * Support only the state known to OS. |
| */ |
| pcntxt_mask = pcntxt_mask & XCNTXT_MASK; |
| |
| xstate_enable(); |
| |
| /* |
| * Recompute the context size for enabled features |
| */ |
| cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx); |
| xstate_size = ebx; |
| |
| update_regset_xstate_info(xstate_size, pcntxt_mask); |
| prepare_fx_sw_frame(); |
| setup_init_fpu_buf(); |
| |
| /* Auto enable eagerfpu for xsaveopt */ |
| if (cpu_has_xsaveopt && eagerfpu != DISABLE) |
| eagerfpu = ENABLE; |
| |
| pr_info("enabled xstate_bv 0x%llx, cntxt size 0x%x\n", |
| pcntxt_mask, xstate_size); |
| } |
| |
| /* |
| * For the very first instance, this calls xstate_enable_boot_cpu(); |
| * for all subsequent instances, this calls xstate_enable(). |
| * |
| * This is somewhat obfuscated due to the lack of powerful enough |
| * overrides for the section checks. |
| */ |
| void xsave_init(void) |
| { |
| static __refdata void (*next_func)(void) = xstate_enable_boot_cpu; |
| void (*this_func)(void); |
| |
| if (!cpu_has_xsave) |
| return; |
| |
| this_func = next_func; |
| next_func = xstate_enable; |
| this_func(); |
| } |
| |
| static inline void __init eager_fpu_init_bp(void) |
| { |
| current->thread.fpu.state = |
| alloc_bootmem_align(xstate_size, __alignof__(struct xsave_struct)); |
| if (!init_xstate_buf) |
| setup_init_fpu_buf(); |
| } |
| |
| void eager_fpu_init(void) |
| { |
| static __refdata void (*boot_func)(void) = eager_fpu_init_bp; |
| |
| clear_used_math(); |
| current_thread_info()->status = 0; |
| |
| if (eagerfpu == ENABLE) |
| setup_force_cpu_cap(X86_FEATURE_EAGER_FPU); |
| |
| if (!cpu_has_eager_fpu) { |
| stts(); |
| return; |
| } |
| |
| if (boot_func) { |
| boot_func(); |
| boot_func = NULL; |
| } |
| |
| /* |
| * This is same as math_state_restore(). But use_xsave() is |
| * not yet patched to use math_state_restore(). |
| */ |
| init_fpu(current); |
| __thread_fpu_begin(current); |
| if (cpu_has_xsave) |
| xrstor_state(init_xstate_buf, -1); |
| else |
| fxrstor_checking(&init_xstate_buf->i387); |
| } |