|  | /* | 
|  | * vsp1_uds.c  --  R-Car VSP1 Up and Down Scaler | 
|  | * | 
|  | * Copyright (C) 2013 Renesas Corporation | 
|  | * | 
|  | * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/gfp.h> | 
|  |  | 
|  | #include <media/v4l2-subdev.h> | 
|  |  | 
|  | #include "vsp1.h" | 
|  | #include "vsp1_uds.h" | 
|  |  | 
|  | #define UDS_MIN_SIZE				4U | 
|  | #define UDS_MAX_SIZE				8190U | 
|  |  | 
|  | #define UDS_MIN_FACTOR				0x0100 | 
|  | #define UDS_MAX_FACTOR				0xffff | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * Device Access | 
|  | */ | 
|  |  | 
|  | static inline u32 vsp1_uds_read(struct vsp1_uds *uds, u32 reg) | 
|  | { | 
|  | return vsp1_read(uds->entity.vsp1, | 
|  | reg + uds->entity.index * VI6_UDS_OFFSET); | 
|  | } | 
|  |  | 
|  | static inline void vsp1_uds_write(struct vsp1_uds *uds, u32 reg, u32 data) | 
|  | { | 
|  | vsp1_write(uds->entity.vsp1, | 
|  | reg + uds->entity.index * VI6_UDS_OFFSET, data); | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * Scaling Computation | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * uds_output_size - Return the output size for an input size and scaling ratio | 
|  | * @input: input size in pixels | 
|  | * @ratio: scaling ratio in U4.12 fixed-point format | 
|  | */ | 
|  | static unsigned int uds_output_size(unsigned int input, unsigned int ratio) | 
|  | { | 
|  | if (ratio > 4096) { | 
|  | /* Down-scaling */ | 
|  | unsigned int mp; | 
|  |  | 
|  | mp = ratio / 4096; | 
|  | mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); | 
|  |  | 
|  | return (input - 1) / mp * mp * 4096 / ratio + 1; | 
|  | } else { | 
|  | /* Up-scaling */ | 
|  | return (input - 1) * 4096 / ratio + 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * uds_output_limits - Return the min and max output sizes for an input size | 
|  | * @input: input size in pixels | 
|  | * @minimum: minimum output size (returned) | 
|  | * @maximum: maximum output size (returned) | 
|  | */ | 
|  | static void uds_output_limits(unsigned int input, | 
|  | unsigned int *minimum, unsigned int *maximum) | 
|  | { | 
|  | *minimum = max(uds_output_size(input, UDS_MAX_FACTOR), UDS_MIN_SIZE); | 
|  | *maximum = min(uds_output_size(input, UDS_MIN_FACTOR), UDS_MAX_SIZE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * uds_passband_width - Return the passband filter width for a scaling ratio | 
|  | * @ratio: scaling ratio in U4.12 fixed-point format | 
|  | */ | 
|  | static unsigned int uds_passband_width(unsigned int ratio) | 
|  | { | 
|  | if (ratio >= 4096) { | 
|  | /* Down-scaling */ | 
|  | unsigned int mp; | 
|  |  | 
|  | mp = ratio / 4096; | 
|  | mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); | 
|  |  | 
|  | return 64 * 4096 * mp / ratio; | 
|  | } else { | 
|  | /* Up-scaling */ | 
|  | return 64; | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int uds_compute_ratio(unsigned int input, unsigned int output) | 
|  | { | 
|  | /* TODO: This is an approximation that will need to be refined. */ | 
|  | return (input - 1) * 4096 / (output - 1); | 
|  | } | 
|  |  | 
|  | static void uds_compute_ratios(struct vsp1_uds *uds) | 
|  | { | 
|  | struct v4l2_mbus_framefmt *input = &uds->entity.formats[UDS_PAD_SINK]; | 
|  | struct v4l2_mbus_framefmt *output = | 
|  | &uds->entity.formats[UDS_PAD_SOURCE]; | 
|  |  | 
|  | uds->hscale = uds_compute_ratio(input->width, output->width); | 
|  | uds->vscale = uds_compute_ratio(input->height, output->height); | 
|  |  | 
|  | dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", | 
|  | uds->hscale, uds->vscale); | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * V4L2 Subdevice Core Operations | 
|  | */ | 
|  |  | 
|  | static int uds_s_stream(struct v4l2_subdev *subdev, int enable) | 
|  | { | 
|  | const struct v4l2_mbus_framefmt *format; | 
|  | struct vsp1_uds *uds = to_uds(subdev); | 
|  |  | 
|  | if (!enable) | 
|  | return 0; | 
|  |  | 
|  | /* Enable multi-tap scaling. */ | 
|  | vsp1_uds_write(uds, VI6_UDS_CTRL, VI6_UDS_CTRL_BC); | 
|  |  | 
|  | vsp1_uds_write(uds, VI6_UDS_PASS_BWIDTH, | 
|  | (uds_passband_width(uds->hscale) | 
|  | << VI6_UDS_PASS_BWIDTH_H_SHIFT) | | 
|  | (uds_passband_width(uds->vscale) | 
|  | << VI6_UDS_PASS_BWIDTH_V_SHIFT)); | 
|  |  | 
|  |  | 
|  | /* Set the scaling ratios and the output size. */ | 
|  | format = &uds->entity.formats[UDS_PAD_SOURCE]; | 
|  |  | 
|  | vsp1_uds_write(uds, VI6_UDS_SCALE, | 
|  | (uds->hscale << VI6_UDS_SCALE_HFRAC_SHIFT) | | 
|  | (uds->vscale << VI6_UDS_SCALE_VFRAC_SHIFT)); | 
|  | vsp1_uds_write(uds, VI6_UDS_CLIP_SIZE, | 
|  | (format->width << VI6_UDS_CLIP_SIZE_HSIZE_SHIFT) | | 
|  | (format->height << VI6_UDS_CLIP_SIZE_VSIZE_SHIFT)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * V4L2 Subdevice Pad Operations | 
|  | */ | 
|  |  | 
|  | static int uds_enum_mbus_code(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_fh *fh, | 
|  | struct v4l2_subdev_mbus_code_enum *code) | 
|  | { | 
|  | static const unsigned int codes[] = { | 
|  | V4L2_MBUS_FMT_ARGB8888_1X32, | 
|  | V4L2_MBUS_FMT_AYUV8_1X32, | 
|  | }; | 
|  |  | 
|  | if (code->pad == UDS_PAD_SINK) { | 
|  | if (code->index >= ARRAY_SIZE(codes)) | 
|  | return -EINVAL; | 
|  |  | 
|  | code->code = codes[code->index]; | 
|  | } else { | 
|  | struct v4l2_mbus_framefmt *format; | 
|  |  | 
|  | /* The UDS can't perform format conversion, the sink format is | 
|  | * always identical to the source format. | 
|  | */ | 
|  | if (code->index) | 
|  | return -EINVAL; | 
|  |  | 
|  | format = v4l2_subdev_get_try_format(fh, UDS_PAD_SINK); | 
|  | code->code = format->code; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int uds_enum_frame_size(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_fh *fh, | 
|  | struct v4l2_subdev_frame_size_enum *fse) | 
|  | { | 
|  | struct v4l2_mbus_framefmt *format; | 
|  |  | 
|  | format = v4l2_subdev_get_try_format(fh, UDS_PAD_SINK); | 
|  |  | 
|  | if (fse->index || fse->code != format->code) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (fse->pad == UDS_PAD_SINK) { | 
|  | fse->min_width = UDS_MIN_SIZE; | 
|  | fse->max_width = UDS_MAX_SIZE; | 
|  | fse->min_height = UDS_MIN_SIZE; | 
|  | fse->max_height = UDS_MAX_SIZE; | 
|  | } else { | 
|  | uds_output_limits(format->width, &fse->min_width, | 
|  | &fse->max_width); | 
|  | uds_output_limits(format->height, &fse->min_height, | 
|  | &fse->max_height); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int uds_get_format(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct vsp1_uds *uds = to_uds(subdev); | 
|  |  | 
|  | fmt->format = *vsp1_entity_get_pad_format(&uds->entity, fh, fmt->pad, | 
|  | fmt->which); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void uds_try_format(struct vsp1_uds *uds, struct v4l2_subdev_fh *fh, | 
|  | unsigned int pad, struct v4l2_mbus_framefmt *fmt, | 
|  | enum v4l2_subdev_format_whence which) | 
|  | { | 
|  | struct v4l2_mbus_framefmt *format; | 
|  | unsigned int minimum; | 
|  | unsigned int maximum; | 
|  |  | 
|  | switch (pad) { | 
|  | case UDS_PAD_SINK: | 
|  | /* Default to YUV if the requested format is not supported. */ | 
|  | if (fmt->code != V4L2_MBUS_FMT_ARGB8888_1X32 && | 
|  | fmt->code != V4L2_MBUS_FMT_AYUV8_1X32) | 
|  | fmt->code = V4L2_MBUS_FMT_AYUV8_1X32; | 
|  |  | 
|  | fmt->width = clamp(fmt->width, UDS_MIN_SIZE, UDS_MAX_SIZE); | 
|  | fmt->height = clamp(fmt->height, UDS_MIN_SIZE, UDS_MAX_SIZE); | 
|  | break; | 
|  |  | 
|  | case UDS_PAD_SOURCE: | 
|  | /* The UDS scales but can't perform format conversion. */ | 
|  | format = vsp1_entity_get_pad_format(&uds->entity, fh, | 
|  | UDS_PAD_SINK, which); | 
|  | fmt->code = format->code; | 
|  |  | 
|  | uds_output_limits(format->width, &minimum, &maximum); | 
|  | fmt->width = clamp(fmt->width, minimum, maximum); | 
|  | uds_output_limits(format->height, &minimum, &maximum); | 
|  | fmt->height = clamp(fmt->height, minimum, maximum); | 
|  | break; | 
|  | } | 
|  |  | 
|  | fmt->field = V4L2_FIELD_NONE; | 
|  | fmt->colorspace = V4L2_COLORSPACE_SRGB; | 
|  | } | 
|  |  | 
|  | static int uds_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct vsp1_uds *uds = to_uds(subdev); | 
|  | struct v4l2_mbus_framefmt *format; | 
|  |  | 
|  | uds_try_format(uds, fh, fmt->pad, &fmt->format, fmt->which); | 
|  |  | 
|  | format = vsp1_entity_get_pad_format(&uds->entity, fh, fmt->pad, | 
|  | fmt->which); | 
|  | *format = fmt->format; | 
|  |  | 
|  | if (fmt->pad == UDS_PAD_SINK) { | 
|  | /* Propagate the format to the source pad. */ | 
|  | format = vsp1_entity_get_pad_format(&uds->entity, fh, | 
|  | UDS_PAD_SOURCE, fmt->which); | 
|  | *format = fmt->format; | 
|  |  | 
|  | uds_try_format(uds, fh, UDS_PAD_SOURCE, format, fmt->which); | 
|  | } | 
|  |  | 
|  | if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) | 
|  | uds_compute_ratios(uds); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * V4L2 Subdevice Operations | 
|  | */ | 
|  |  | 
|  | static struct v4l2_subdev_video_ops uds_video_ops = { | 
|  | .s_stream = uds_s_stream, | 
|  | }; | 
|  |  | 
|  | static struct v4l2_subdev_pad_ops uds_pad_ops = { | 
|  | .enum_mbus_code = uds_enum_mbus_code, | 
|  | .enum_frame_size = uds_enum_frame_size, | 
|  | .get_fmt = uds_get_format, | 
|  | .set_fmt = uds_set_format, | 
|  | }; | 
|  |  | 
|  | static struct v4l2_subdev_ops uds_ops = { | 
|  | .video	= &uds_video_ops, | 
|  | .pad    = &uds_pad_ops, | 
|  | }; | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * Initialization and Cleanup | 
|  | */ | 
|  |  | 
|  | struct vsp1_uds *vsp1_uds_create(struct vsp1_device *vsp1, unsigned int index) | 
|  | { | 
|  | struct v4l2_subdev *subdev; | 
|  | struct vsp1_uds *uds; | 
|  | int ret; | 
|  |  | 
|  | uds = devm_kzalloc(vsp1->dev, sizeof(*uds), GFP_KERNEL); | 
|  | if (uds == NULL) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | uds->entity.type = VSP1_ENTITY_UDS; | 
|  | uds->entity.index = index; | 
|  | uds->entity.id = VI6_DPR_NODE_UDS(index); | 
|  |  | 
|  | ret = vsp1_entity_init(vsp1, &uds->entity, 2); | 
|  | if (ret < 0) | 
|  | return ERR_PTR(ret); | 
|  |  | 
|  | /* Initialize the V4L2 subdev. */ | 
|  | subdev = &uds->entity.subdev; | 
|  | v4l2_subdev_init(subdev, &uds_ops); | 
|  |  | 
|  | subdev->entity.ops = &vsp1_media_ops; | 
|  | subdev->internal_ops = &vsp1_subdev_internal_ops; | 
|  | snprintf(subdev->name, sizeof(subdev->name), "%s uds.%u", | 
|  | dev_name(vsp1->dev), index); | 
|  | v4l2_set_subdevdata(subdev, uds); | 
|  | subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
|  |  | 
|  | vsp1_entity_init_formats(subdev, NULL); | 
|  |  | 
|  | return uds; | 
|  | } |