kernel/context_tracking.c - arm/linux-arm-legacy - Git at Google

 /*
  * Context tracking: Probe on high level context boundaries such as kernel
  * and userspace. This includes syscalls and exceptions entry/exit.
  *
  * This is used by RCU to remove its dependency on the timer tick while a CPU
  * runs in userspace.
  *
  *  Started by Frederic Weisbecker:
  *
  * Copyright (C) 2012 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
  *
  * Many thanks to Gilad Ben-Yossef, Paul McKenney, Ingo Molnar, Andrew Morton,
  * Steven Rostedt, Peter Zijlstra for suggestions and improvements.
  *
  */

 #include <linux/context_tracking.h>
 #include <linux/rcupdate.h>
 #include <linux/sched.h>
 #include <linux/hardirq.h>
 #include <linux/export.h>

 #define CREATE_TRACE_POINTS
 #include <trace/events/context_tracking.h>

 struct static_key context_tracking_enabled = STATIC_KEY_INIT_FALSE;
 EXPORT_SYMBOL_GPL(context_tracking_enabled);

 DEFINE_PER_CPU(struct context_tracking, context_tracking);
 EXPORT_SYMBOL_GPL(context_tracking);

 void context_tracking_cpu_set(int cpu)
 {
 	if (!per_cpu(context_tracking.active, cpu)) {
 		per_cpu(context_tracking.active, cpu) = true;
 		static_key_slow_inc(&context_tracking_enabled);
 	}
 }

 /**
  * context_tracking_user_enter - Inform the context tracking that the CPU is going to
  *                               enter userspace mode.
  *
  * This function must be called right before we switch from the kernel
  * to userspace, when it's guaranteed the remaining kernel instructions
  * to execute won't use any RCU read side critical section because this
  * function sets RCU in extended quiescent state.
  */
 void context_tracking_user_enter(void)
 {
 	unsigned long flags;

 	/*
 	 * Repeat the user_enter() check here because some archs may be calling
 	 * this from asm and if no CPU needs context tracking, they shouldn't
 	 * go further. Repeat the check here until they support the inline static
 	 * key check.
 	 */
 	if (!context_tracking_is_enabled())
 		return;

 	/*
 	 * Some contexts may involve an exception occuring in an irq,
 	 * leading to that nesting:
 	 * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
 	 * This would mess up the dyntick_nesting count though. And rcu_irq_*()
 	 * helpers are enough to protect RCU uses inside the exception. So
 	 * just return immediately if we detect we are in an IRQ.
 	 */
 	if (in_interrupt())
 		return;

 	/* Kernel threads aren't supposed to go to userspace */
 	WARN_ON_ONCE(!current->mm);

 	local_irq_save(flags);
 	if ( __this_cpu_read(context_tracking.state) != IN_USER) {
 		if (__this_cpu_read(context_tracking.active)) {
 			trace_user_enter(0);
 			/*
 			 * At this stage, only low level arch entry code remains and
 			 * then we'll run in userspace. We can assume there won't be
 			 * any RCU read-side critical section until the next call to
 			 * user_exit() or rcu_irq_enter(). Let's remove RCU's dependency
 			 * on the tick.
 			 */
 			vtime_user_enter(current);
 			rcu_user_enter();
 		}
 		/*
 		 * Even if context tracking is disabled on this CPU, because it's outside
 		 * the full dynticks mask for example, we still have to keep track of the
 		 * context transitions and states to prevent inconsistency on those of
 		 * other CPUs.
 		 * If a task triggers an exception in userspace, sleep on the exception
 		 * handler and then migrate to another CPU, that new CPU must know where
 		 * the exception returns by the time we call exception_exit().
 		 * This information can only be provided by the previous CPU when it called
 		 * exception_enter().
 		 * OTOH we can spare the calls to vtime and RCU when context_tracking.active
 		 * is false because we know that CPU is not tickless.
 		 */
 		__this_cpu_write(context_tracking.state, IN_USER);
 	}
 	local_irq_restore(flags);
 }

 #ifdef CONFIG_PREEMPT
 /**
  * preempt_schedule_context - preempt_schedule called by tracing
  *
  * The tracing infrastructure uses preempt_enable_notrace to prevent
  * recursion and tracing preempt enabling caused by the tracing
  * infrastructure itself. But as tracing can happen in areas coming
  * from userspace or just about to enter userspace, a preempt enable
  * can occur before user_exit() is called. This will cause the scheduler
  * to be called when the system is still in usermode.
  *
  * To prevent this, the preempt_enable_notrace will use this function
  * instead of preempt_schedule() to exit user context if needed before
  * calling the scheduler.
  */
 asmlinkage void __sched notrace preempt_schedule_context(void)
 {
 	enum ctx_state prev_ctx;

 	if (likely(!preemptible()))
 		return;

 	/*
 	 * Need to disable preemption in case user_exit() is traced
 	 * and the tracer calls preempt_enable_notrace() causing
 	 * an infinite recursion.
 	 */
 	preempt_disable_notrace();
 	prev_ctx = exception_enter();
 	preempt_enable_no_resched_notrace();

 	preempt_schedule();

 	preempt_disable_notrace();
 	exception_exit(prev_ctx);
 	preempt_enable_notrace();
 }
 EXPORT_SYMBOL_GPL(preempt_schedule_context);
 #endif /* CONFIG_PREEMPT */

 /**
  * context_tracking_user_exit - Inform the context tracking that the CPU is
  *                              exiting userspace mode and entering the kernel.
  *
  * This function must be called after we entered the kernel from userspace
  * before any use of RCU read side critical section. This potentially include
  * any high level kernel code like syscalls, exceptions, signal handling, etc...
  *
  * This call supports re-entrancy. This way it can be called from any exception
  * handler without needing to know if we came from userspace or not.
  */
 void context_tracking_user_exit(void)
 {
 	unsigned long flags;

 	if (!context_tracking_is_enabled())
 		return;

 	if (in_interrupt())
 		return;

 	local_irq_save(flags);
 	if (__this_cpu_read(context_tracking.state) == IN_USER) {
 		if (__this_cpu_read(context_tracking.active)) {
 			/*
 			 * We are going to run code that may use RCU. Inform
 			 * RCU core about that (ie: we may need the tick again).
 			 */
 			rcu_user_exit();
 			vtime_user_exit(current);
 			trace_user_exit(0);
 		}
 		__this_cpu_write(context_tracking.state, IN_KERNEL);
 	}
 	local_irq_restore(flags);
 }

 /**
  * __context_tracking_task_switch - context switch the syscall callbacks
  * @prev: the task that is being switched out
  * @next: the task that is being switched in
  *
  * The context tracking uses the syscall slow path to implement its user-kernel
  * boundaries probes on syscalls. This way it doesn't impact the syscall fast
  * path on CPUs that don't do context tracking.
  *
  * But we need to clear the flag on the previous task because it may later
  * migrate to some CPU that doesn't do the context tracking. As such the TIF
  * flag may not be desired there.
  */
 void __context_tracking_task_switch(struct task_struct *prev,
 				    struct task_struct *next)
 {
 	clear_tsk_thread_flag(prev, TIF_NOHZ);
 	set_tsk_thread_flag(next, TIF_NOHZ);
 }

 #ifdef CONFIG_CONTEXT_TRACKING_FORCE
 void __init context_tracking_init(void)
 {
 	int cpu;

 	for_each_possible_cpu(cpu)
 		context_tracking_cpu_set(cpu);
 }
 #endif
	/*
	* Context tracking: Probe on high level context boundaries such as kernel
	* and userspace. This includes syscalls and exceptions entry/exit.
	*
	* This is used by RCU to remove its dependency on the timer tick while a CPU
	* runs in userspace.
	*
	* Started by Frederic Weisbecker:
	*
	* Copyright (C) 2012 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
	*
	* Many thanks to Gilad Ben-Yossef, Paul McKenney, Ingo Molnar, Andrew Morton,
	* Steven Rostedt, Peter Zijlstra for suggestions and improvements.
	*
	*/

	#include <linux/context_tracking.h>
	#include <linux/rcupdate.h>
	#include <linux/sched.h>
	#include <linux/hardirq.h>
	#include <linux/export.h>

	#define CREATE_TRACE_POINTS
	#include <trace/events/context_tracking.h>

	struct static_key context_tracking_enabled = STATIC_KEY_INIT_FALSE;
	EXPORT_SYMBOL_GPL(context_tracking_enabled);

	DEFINE_PER_CPU(struct context_tracking, context_tracking);
	EXPORT_SYMBOL_GPL(context_tracking);

	void context_tracking_cpu_set(int cpu)
	{
	if (!per_cpu(context_tracking.active, cpu)) {
	per_cpu(context_tracking.active, cpu) = true;
	static_key_slow_inc(&context_tracking_enabled);
	}
	}

	/**
	* context_tracking_user_enter - Inform the context tracking that the CPU is going to
	* enter userspace mode.
	*
	* This function must be called right before we switch from the kernel
	* to userspace, when it's guaranteed the remaining kernel instructions
	* to execute won't use any RCU read side critical section because this
	* function sets RCU in extended quiescent state.
	*/
	void context_tracking_user_enter(void)
	{
	unsigned long flags;

	/*
	* Repeat the user_enter() check here because some archs may be calling
	* this from asm and if no CPU needs context tracking, they shouldn't
	* go further. Repeat the check here until they support the inline static
	* key check.
	*/
	if (!context_tracking_is_enabled())
	return;

	/*
	* Some contexts may involve an exception occuring in an irq,
	* leading to that nesting:
	* rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
	* This would mess up the dyntick_nesting count though. And rcu_irq_*()
	* helpers are enough to protect RCU uses inside the exception. So
	* just return immediately if we detect we are in an IRQ.
	*/
	if (in_interrupt())
	return;

	/* Kernel threads aren't supposed to go to userspace */
	WARN_ON_ONCE(!current->mm);

	local_irq_save(flags);
	if ( __this_cpu_read(context_tracking.state) != IN_USER) {
	if (__this_cpu_read(context_tracking.active)) {
	trace_user_enter(0);
	/*
	* At this stage, only low level arch entry code remains and
	* then we'll run in userspace. We can assume there won't be
	* any RCU read-side critical section until the next call to
	* user_exit() or rcu_irq_enter(). Let's remove RCU's dependency
	* on the tick.
	*/
	vtime_user_enter(current);
	rcu_user_enter();
	}
	/*
	* Even if context tracking is disabled on this CPU, because it's outside
	* the full dynticks mask for example, we still have to keep track of the
	* context transitions and states to prevent inconsistency on those of
	* other CPUs.
	* If a task triggers an exception in userspace, sleep on the exception
	* handler and then migrate to another CPU, that new CPU must know where
	* the exception returns by the time we call exception_exit().
	* This information can only be provided by the previous CPU when it called
	* exception_enter().
	* OTOH we can spare the calls to vtime and RCU when context_tracking.active
	* is false because we know that CPU is not tickless.
	*/
	__this_cpu_write(context_tracking.state, IN_USER);
	}
	local_irq_restore(flags);
	}

	#ifdef CONFIG_PREEMPT
	/**
	* preempt_schedule_context - preempt_schedule called by tracing
	*
	* The tracing infrastructure uses preempt_enable_notrace to prevent
	* recursion and tracing preempt enabling caused by the tracing
	* infrastructure itself. But as tracing can happen in areas coming
	* from userspace or just about to enter userspace, a preempt enable
	* can occur before user_exit() is called. This will cause the scheduler
	* to be called when the system is still in usermode.
	*
	* To prevent this, the preempt_enable_notrace will use this function
	* instead of preempt_schedule() to exit user context if needed before
	* calling the scheduler.
	*/
	asmlinkage void __sched notrace preempt_schedule_context(void)
	{
	enum ctx_state prev_ctx;

	if (likely(!preemptible()))
	return;

	/*
	* Need to disable preemption in case user_exit() is traced
	* and the tracer calls preempt_enable_notrace() causing
	* an infinite recursion.
	*/
	preempt_disable_notrace();
	prev_ctx = exception_enter();
	preempt_enable_no_resched_notrace();

	preempt_schedule();

	preempt_disable_notrace();
	exception_exit(prev_ctx);
	preempt_enable_notrace();
	}
	EXPORT_SYMBOL_GPL(preempt_schedule_context);
	#endif /* CONFIG_PREEMPT */

	/**
	* context_tracking_user_exit - Inform the context tracking that the CPU is
	* exiting userspace mode and entering the kernel.
	*
	* This function must be called after we entered the kernel from userspace
	* before any use of RCU read side critical section. This potentially include
	* any high level kernel code like syscalls, exceptions, signal handling, etc...
	*
	* This call supports re-entrancy. This way it can be called from any exception
	* handler without needing to know if we came from userspace or not.
	*/
	void context_tracking_user_exit(void)
	{
	unsigned long flags;

	if (!context_tracking_is_enabled())
	return;

	if (in_interrupt())
	return;

	local_irq_save(flags);
	if (__this_cpu_read(context_tracking.state) == IN_USER) {
	if (__this_cpu_read(context_tracking.active)) {
	/*
	* We are going to run code that may use RCU. Inform
	* RCU core about that (ie: we may need the tick again).
	*/
	rcu_user_exit();
	vtime_user_exit(current);
	trace_user_exit(0);
	}
	__this_cpu_write(context_tracking.state, IN_KERNEL);
	}
	local_irq_restore(flags);
	}

	/**
	* __context_tracking_task_switch - context switch the syscall callbacks
	* @prev: the task that is being switched out
	* @next: the task that is being switched in
	*
	* The context tracking uses the syscall slow path to implement its user-kernel
	* boundaries probes on syscalls. This way it doesn't impact the syscall fast
	* path on CPUs that don't do context tracking.
	*
	* But we need to clear the flag on the previous task because it may later
	* migrate to some CPU that doesn't do the context tracking. As such the TIF
	* flag may not be desired there.
	*/
	void __context_tracking_task_switch(struct task_struct *prev,
	struct task_struct *next)
	{
	clear_tsk_thread_flag(prev, TIF_NOHZ);
	set_tsk_thread_flag(next, TIF_NOHZ);
	}

	#ifdef CONFIG_CONTEXT_TRACKING_FORCE
	void __init context_tracking_init(void)
	{
	int cpu;

	for_each_possible_cpu(cpu)
	context_tracking_cpu_set(cpu);
	}
	#endif