| /* |
| * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * EXYNOS - SATA PHY controller driver |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/ahci_platform.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/irqs.h> |
| |
| #include <mach/map.h> |
| |
| #include "sata_phy.h" |
| #include "sata_exynos_phy.h" |
| |
| #define SATA_TIME_LIMIT 1000 |
| |
| static struct i2c_client *i2c_client; |
| |
| static struct i2c_driver sataphy_i2c_driver; |
| |
| struct exynos_sata_phy { |
| void __iomem *mmio; |
| void __iomem *pmureg; |
| struct clk *clk; |
| struct device *dev; |
| struct sata_phy phy; |
| }; |
| |
| static bool sata_is_reg(void __iomem *base, u32 reg, u32 checkbit, u32 status) |
| { |
| if ((readl(base + reg) & checkbit) == status) |
| return true; |
| else |
| return false; |
| } |
| |
| static bool wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, |
| u32 status) |
| { |
| unsigned long timeout = jiffies + usecs_to_jiffies(1000); |
| |
| while (time_before(jiffies, timeout)) { |
| if (sata_is_reg(base, reg, checkbit, status)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int exynos_sataphy_parse_dt(struct device *dev, |
| struct exynos_sata_phy *phy) |
| { |
| struct device_node *sataphy_pmu; |
| |
| sataphy_pmu = of_get_child_by_name(dev->of_node, "sataphy-pmu"); |
| if (!sataphy_pmu) { |
| dev_err(dev, |
| "PMU control register for sata-phy not specified\n"); |
| return -ENODEV; |
| } |
| |
| phy->pmureg = of_iomap(sataphy_pmu, 0); |
| |
| of_node_put(sataphy_pmu); |
| |
| if (!phy->pmureg) { |
| dev_err(dev, "Can't get sata-phy pmu control register\n"); |
| return -EADDRNOTAVAIL; |
| } |
| |
| return 0; |
| } |
| |
| static int exynos_sataphy_init(struct sata_phy *phy) |
| { |
| int ret; |
| u32 val; |
| |
| /* Values to be written to enable 40 bits interface */ |
| u8 buf[] = { 0x3A, 0x0B }; |
| |
| struct exynos_sata_phy *sata_phy; |
| |
| if (!i2c_client) |
| return -EPROBE_DEFER; |
| |
| sata_phy = container_of(phy, struct exynos_sata_phy, phy); |
| |
| ret = clk_prepare_enable(sata_phy->clk); |
| if (ret < 0) { |
| dev_err(phy->dev, "failed to enable source clk\n"); |
| return ret; |
| } |
| |
| if (sata_is_reg(sata_phy->mmio , EXYNOS5_SATA_CTRL0, |
| CTRL0_P0_PHY_CALIBRATED, CTRL0_P0_PHY_CALIBRATED)) |
| return 0; |
| |
| writel(SATA_PHY_PMU_EN, sata_phy->pmureg); |
| |
| val = 0; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET); |
| |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET); |
| val |= 0xFF; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET); |
| |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET); |
| val |= LINK_RESET; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET); |
| |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET); |
| val |= RESET_CMN_RST_N; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET); |
| |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM); |
| val &= ~PHCTRLM_REF_RATE; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM); |
| |
| /* High speed enable for Gen3 */ |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM); |
| val |= PHCTRLM_HIGH_SPEED; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM); |
| |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_CTRL0); |
| val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_CTRL0); |
| |
| writel(0x2, sata_phy->mmio + EXYNOS5_SATA_MODE0); |
| |
| ret = i2c_master_send(i2c_client, buf, sizeof(buf)); |
| if (ret < 0) |
| return -ENXIO; |
| |
| /* release cmu reset */ |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET); |
| val &= ~RESET_CMN_RST_N; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET); |
| |
| val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET); |
| val |= RESET_CMN_RST_N; |
| writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET); |
| |
| if (wait_for_reg_status(sata_phy->mmio, EXYNOS5_SATA_PHSATA_STATM, |
| PHSTATM_PLL_LOCKED, 1)) { |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int exynos_sataphy_shutdown(struct sata_phy *phy) |
| { |
| |
| struct exynos_sata_phy *sata_phy; |
| |
| sata_phy = container_of(phy, struct exynos_sata_phy, phy); |
| clk_disable_unprepare(sata_phy->clk); |
| |
| return 0; |
| } |
| |
| static int exynos_sata_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *i2c_id) |
| { |
| i2c_client = client; |
| return 0; |
| } |
| |
| static int exynos_sata_phy_probe(struct platform_device *pdev) |
| { |
| struct exynos_sata_phy *sataphy; |
| struct device *dev = &pdev->dev; |
| int ret = 0; |
| sataphy = devm_kzalloc(dev, sizeof(struct exynos_sata_phy), GFP_KERNEL); |
| if (!sataphy) { |
| dev_err(dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| sataphy->mmio = of_iomap(dev->of_node, 0); |
| if (!sataphy->mmio) { |
| dev_err(dev, "failed to remap IO\n"); |
| return -EADDRNOTAVAIL; |
| } |
| |
| ret = exynos_sataphy_parse_dt(dev, sataphy); |
| if (ret != 0) |
| goto err_iomap; |
| |
| sataphy->clk = devm_clk_get(dev, "sata_phyctrl"); |
| if (IS_ERR(sataphy->clk)) { |
| dev_err(dev, "failed to get clk for PHY\n"); |
| ret = PTR_ERR(sataphy->clk); |
| goto err_pmu; |
| } |
| |
| sataphy->phy.init = exynos_sataphy_init; |
| sataphy->phy.shutdown = exynos_sataphy_shutdown; |
| sataphy->phy.dev = dev; |
| |
| ret = sata_add_phy(&sataphy->phy); |
| if (ret < 0) { |
| dev_err(dev, "PHY not registered with framework\n"); |
| goto err_iomap; |
| } |
| |
| ret = i2c_add_driver(&sataphy_i2c_driver); |
| if (ret < 0) |
| goto err_phy; |
| |
| platform_set_drvdata(pdev, sataphy); |
| |
| return ret; |
| |
| err_phy: |
| sata_remove_phy(&sataphy->phy); |
| |
| err_pmu: |
| iounmap(sataphy->pmureg); |
| |
| err_iomap: |
| iounmap(sataphy->mmio); |
| |
| return ret; |
| } |
| |
| static int exynos_sata_phy_remove(struct platform_device *pdev) |
| { |
| struct exynos_sata_phy *sataphy; |
| |
| sataphy = platform_get_drvdata(pdev); |
| iounmap(sataphy->mmio); |
| i2c_del_driver(&sataphy_i2c_driver); |
| sata_remove_phy(&sataphy->phy); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sata_phy_of_match[] = { |
| { .compatible = "samsung,exynos5-sata-phy", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, sata_phy_of_match); |
| |
| static const struct i2c_device_id phy_i2c_device_match[] = { |
| { "sata-phy", 0 }, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, phy_i2c_device_match); |
| |
| static struct platform_driver sata_phy_driver = { |
| .probe = exynos_sata_phy_probe, |
| .remove = exynos_sata_phy_remove, |
| .driver = { |
| .name = "sata-phy", |
| .owner = THIS_MODULE, |
| .of_match_table = sata_phy_of_match, |
| }, |
| }; |
| |
| static struct i2c_driver sataphy_i2c_driver = { |
| .driver = { |
| .name = "sata-phy-i2c", |
| .owner = THIS_MODULE, |
| .of_match_table = (void *)phy_i2c_device_match, |
| }, |
| .probe = exynos_sata_i2c_probe, |
| .id_table = phy_i2c_device_match, |
| }; |
| |
| module_platform_driver(sata_phy_driver); |
| |
| MODULE_DESCRIPTION("EXYNOS SATA PHY DRIVER"); |
| MODULE_AUTHOR("Vasanth Ananthan, <vasanth.a@samsung.com>"); |
| MODULE_LICENSE("GPL"); |