arch/tile/kernel/irq.c - arm/linux-arm-legacy - Git at Google

 /*
  * Copyright 2010 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
  *   as published by the Free Software Foundation, version 2.
  *
  *   This program is distributed in the hope that it will be useful, but
  *   WITHOUT ANY WARRANTY; without even the implied warranty of
  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */

 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kernel_stat.h>
 #include <linux/uaccess.h>
 #include <hv/drv_pcie_rc_intf.h>
 #include <arch/spr_def.h>
 #include <asm/traps.h>

 /* Bit-flag stored in irq_desc->chip_data to indicate HW-cleared irqs. */
 #define IS_HW_CLEARED 1

 /*
  * The set of interrupts we enable for arch_local_irq_enable().
  * This is initialized to have just a single interrupt that the kernel
  * doesn't actually use as a sentinel.  During kernel init,
  * interrupts are added as the kernel gets prepared to support them.
  * NOTE: we could probably initialize them all statically up front.
  */
 DEFINE_PER_CPU(unsigned long long, interrupts_enabled_mask) =
   INITIAL_INTERRUPTS_ENABLED;
 EXPORT_PER_CPU_SYMBOL(interrupts_enabled_mask);

 /* Define per-tile device interrupt statistics state. */
 DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
 EXPORT_PER_CPU_SYMBOL(irq_stat);

 /*
  * Define per-tile irq disable mask; the hardware/HV only has a single
  * mask that we use to implement both masking and disabling.
  */
 static DEFINE_PER_CPU(unsigned long, irq_disable_mask)
 	____cacheline_internodealigned_in_smp;

 /*
  * Per-tile IRQ nesting depth.  Used to make sure we enable newly
  * enabled IRQs before exiting the outermost interrupt.
  */
 static DEFINE_PER_CPU(int, irq_depth);

 /* State for allocating IRQs on Gx. */
 #if CHIP_HAS_IPI()
 static unsigned long available_irqs = ((1UL << NR_IRQS) - 1) &
 				      (~(1UL << IRQ_RESCHEDULE));
 static DEFINE_SPINLOCK(available_irqs_lock);
 #endif

 #if CHIP_HAS_IPI()
 /* Use SPRs to manipulate device interrupts. */
 #define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_K, irq_mask)
 #define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_K, irq_mask)
 #define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_K, irq_mask)
 #else
 /* Use HV to manipulate device interrupts. */
 #define mask_irqs(irq_mask) hv_disable_intr(irq_mask)
 #define unmask_irqs(irq_mask) hv_enable_intr(irq_mask)
 #define clear_irqs(irq_mask) hv_clear_intr(irq_mask)
 #endif

 /*
  * The interrupt handling path, implemented in terms of HV interrupt
  * emulation on TILEPro, and IPI hardware on TILE-Gx.
  * Entered with interrupts disabled.
  */
 void tile_dev_intr(struct pt_regs *regs, int intnum)
 {
 	int depth = __get_cpu_var(irq_depth)++;
 	unsigned long original_irqs;
 	unsigned long remaining_irqs;
 	struct pt_regs *old_regs;

 #if CHIP_HAS_IPI()
 	/*
 	 * Pending interrupts are listed in an SPR.  We might be
 	 * nested, so be sure to only handle irqs that weren't already
 	 * masked by a previous interrupt.  Then, mask out the ones
 	 * we're going to handle.
 	 */
 	unsigned long masked = __insn_mfspr(SPR_IPI_MASK_K);
 	original_irqs = __insn_mfspr(SPR_IPI_EVENT_K) & ~masked;
 	__insn_mtspr(SPR_IPI_MASK_SET_K, original_irqs);
 #else
 	/*
 	 * Hypervisor performs the equivalent of the Gx code above and
 	 * then puts the pending interrupt mask into a system save reg
 	 * for us to find.
 	 */
 	original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_K_3);
 #endif
 	remaining_irqs = original_irqs;

 	/* Track time spent here in an interrupt context. */
 	old_regs = set_irq_regs(regs);
 	irq_enter();

 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	/* Debugging check for stack overflow: less than 1/8th stack free? */
 	{
 		long sp = stack_pointer - (long) current_thread_info();
 		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
 			pr_emerg("tile_dev_intr: "
 			       "stack overflow: %ld\n",
 			       sp - sizeof(struct thread_info));
 			dump_stack();
 		}
 	}
 #endif
 	while (remaining_irqs) {
 		unsigned long irq = __ffs(remaining_irqs);
 		remaining_irqs &= ~(1UL << irq);

 		/* Count device irqs; Linux IPIs are counted elsewhere. */
 		if (irq != IRQ_RESCHEDULE)
 			__get_cpu_var(irq_stat).irq_dev_intr_count++;

 		generic_handle_irq(irq);
 	}

 	/*
 	 * If we weren't nested, turn on all enabled interrupts,
 	 * including any that were reenabled during interrupt
 	 * handling.
 	 */
 	if (depth == 0)
 		unmask_irqs(~__get_cpu_var(irq_disable_mask));

 	__get_cpu_var(irq_depth)--;

 	/*
 	 * Track time spent against the current process again and
 	 * process any softirqs if they are waiting.
 	 */
 	irq_exit();
 	set_irq_regs(old_regs);
 }


 /*
  * Remove an irq from the disabled mask.  If we're in an interrupt
  * context, defer enabling the HW interrupt until we leave.
  */
 static void tile_irq_chip_enable(struct irq_data *d)
 {
 	get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq);
 	if (__get_cpu_var(irq_depth) == 0)
 		unmask_irqs(1UL << d->irq);
 	put_cpu_var(irq_disable_mask);
 }

 /*
  * Add an irq to the disabled mask.  We disable the HW interrupt
  * immediately so that there's no possibility of it firing.  If we're
  * in an interrupt context, the return path is careful to avoid
  * unmasking a newly disabled interrupt.
  */
 static void tile_irq_chip_disable(struct irq_data *d)
 {
 	get_cpu_var(irq_disable_mask) |= (1UL << d->irq);
 	mask_irqs(1UL << d->irq);
 	put_cpu_var(irq_disable_mask);
 }

 /* Mask an interrupt. */
 static void tile_irq_chip_mask(struct irq_data *d)
 {
 	mask_irqs(1UL << d->irq);
 }

 /* Unmask an interrupt. */
 static void tile_irq_chip_unmask(struct irq_data *d)
 {
 	unmask_irqs(1UL << d->irq);
 }

 /*
  * Clear an interrupt before processing it so that any new assertions
  * will trigger another irq.
  */
 static void tile_irq_chip_ack(struct irq_data *d)
 {
 	if ((unsigned long)irq_data_get_irq_chip_data(d) != IS_HW_CLEARED)
 		clear_irqs(1UL << d->irq);
 }

 /*
  * For per-cpu interrupts, we need to avoid unmasking any interrupts
  * that we disabled via disable_percpu_irq().
  */
 static void tile_irq_chip_eoi(struct irq_data *d)
 {
 	if (!(__get_cpu_var(irq_disable_mask) & (1UL << d->irq)))
 		unmask_irqs(1UL << d->irq);
 }

 static struct irq_chip tile_irq_chip = {
 	.name = "tile_irq_chip",
 	.irq_enable = tile_irq_chip_enable,
 	.irq_disable = tile_irq_chip_disable,
 	.irq_ack = tile_irq_chip_ack,
 	.irq_eoi = tile_irq_chip_eoi,
 	.irq_mask = tile_irq_chip_mask,
 	.irq_unmask = tile_irq_chip_unmask,
 };

 void __init init_IRQ(void)
 {
 	ipi_init();
 }

 void setup_irq_regs(void)
 {
 	/* Enable interrupt delivery. */
 	unmask_irqs(~0UL);
 #if CHIP_HAS_IPI()
 	arch_local_irq_unmask(INT_IPI_K);
 #endif
 }

 void tile_irq_activate(unsigned int irq, int tile_irq_type)
 {
 	/*
 	 * We use handle_level_irq() by default because the pending
 	 * interrupt vector (whether modeled by the HV on
 	 * TILEPro or implemented in hardware on TILE-Gx) has
 	 * level-style semantics for each bit.  An interrupt fires
 	 * whenever a bit is high, not just at edges.
 	 */
 	irq_flow_handler_t handle = handle_level_irq;
 	if (tile_irq_type == TILE_IRQ_PERCPU)
 		handle = handle_percpu_irq;
 	irq_set_chip_and_handler(irq, &tile_irq_chip, handle);

 	/*
 	 * Flag interrupts that are hardware-cleared so that ack()
 	 * won't clear them.
 	 */
 	if (tile_irq_type == TILE_IRQ_HW_CLEAR)
 		irq_set_chip_data(irq, (void *)IS_HW_CLEARED);
 }
 EXPORT_SYMBOL(tile_irq_activate);


 void ack_bad_irq(unsigned int irq)
 {
 	pr_err("unexpected IRQ trap at vector %02x\n", irq);
 }

 /*
  * Generic, controller-independent functions:
  */

 #if CHIP_HAS_IPI()
 int create_irq(void)
 {
 	unsigned long flags;
 	int result;

 	spin_lock_irqsave(&available_irqs_lock, flags);
 	if (available_irqs == 0)
 		result = -ENOMEM;
 	else {
 		result = __ffs(available_irqs);
 		available_irqs &= ~(1UL << result);
 		dynamic_irq_init(result);
 	}
 	spin_unlock_irqrestore(&available_irqs_lock, flags);

 	return result;
 }
 EXPORT_SYMBOL(create_irq);

 void destroy_irq(unsigned int irq)
 {
 	unsigned long flags;

 	spin_lock_irqsave(&available_irqs_lock, flags);
 	available_irqs |= (1UL << irq);
 	dynamic_irq_cleanup(irq);
 	spin_unlock_irqrestore(&available_irqs_lock, flags);
 }
 EXPORT_SYMBOL(destroy_irq);
 #endif
	/*
	* Copyright 2010 Tilera Corporation. All Rights Reserved.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation, version 2.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
	* NON INFRINGEMENT. See the GNU General Public License for
	* more details.
	*/

	#include <linux/module.h>
	#include <linux/seq_file.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>
	#include <linux/kernel_stat.h>
	#include <linux/uaccess.h>
	#include <hv/drv_pcie_rc_intf.h>
	#include <arch/spr_def.h>
	#include <asm/traps.h>

	/* Bit-flag stored in irq_desc->chip_data to indicate HW-cleared irqs. */
	#define IS_HW_CLEARED 1

	/*
	* The set of interrupts we enable for arch_local_irq_enable().
	* This is initialized to have just a single interrupt that the kernel
	* doesn't actually use as a sentinel. During kernel init,
	* interrupts are added as the kernel gets prepared to support them.
	* NOTE: we could probably initialize them all statically up front.
	*/
	DEFINE_PER_CPU(unsigned long long, interrupts_enabled_mask) =
	INITIAL_INTERRUPTS_ENABLED;
	EXPORT_PER_CPU_SYMBOL(interrupts_enabled_mask);

	/* Define per-tile device interrupt statistics state. */
	DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
	EXPORT_PER_CPU_SYMBOL(irq_stat);

	/*
	* Define per-tile irq disable mask; the hardware/HV only has a single
	* mask that we use to implement both masking and disabling.
	*/
	static DEFINE_PER_CPU(unsigned long, irq_disable_mask)
	____cacheline_internodealigned_in_smp;

	/*
	* Per-tile IRQ nesting depth. Used to make sure we enable newly
	* enabled IRQs before exiting the outermost interrupt.
	*/
	static DEFINE_PER_CPU(int, irq_depth);

	/* State for allocating IRQs on Gx. */
	#if CHIP_HAS_IPI()
	static unsigned long available_irqs = ((1UL << NR_IRQS) - 1) &
	(~(1UL << IRQ_RESCHEDULE));
	static DEFINE_SPINLOCK(available_irqs_lock);
	#endif

	#if CHIP_HAS_IPI()
	/* Use SPRs to manipulate device interrupts. */
	#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_K, irq_mask)
	#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_K, irq_mask)
	#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_K, irq_mask)
	#else
	/* Use HV to manipulate device interrupts. */
	#define mask_irqs(irq_mask) hv_disable_intr(irq_mask)
	#define unmask_irqs(irq_mask) hv_enable_intr(irq_mask)
	#define clear_irqs(irq_mask) hv_clear_intr(irq_mask)
	#endif

	/*
	* The interrupt handling path, implemented in terms of HV interrupt
	* emulation on TILEPro, and IPI hardware on TILE-Gx.
	* Entered with interrupts disabled.
	*/
	void tile_dev_intr(struct pt_regs *regs, int intnum)
	{
	int depth = __get_cpu_var(irq_depth)++;
	unsigned long original_irqs;
	unsigned long remaining_irqs;
	struct pt_regs *old_regs;

	#if CHIP_HAS_IPI()
	/*
	* Pending interrupts are listed in an SPR. We might be
	* nested, so be sure to only handle irqs that weren't already
	* masked by a previous interrupt. Then, mask out the ones
	* we're going to handle.
	*/
	unsigned long masked = __insn_mfspr(SPR_IPI_MASK_K);
	original_irqs = __insn_mfspr(SPR_IPI_EVENT_K) & ~masked;
	__insn_mtspr(SPR_IPI_MASK_SET_K, original_irqs);
	#else
	/*
	* Hypervisor performs the equivalent of the Gx code above and
	* then puts the pending interrupt mask into a system save reg
	* for us to find.
	*/
	original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_K_3);
	#endif
	remaining_irqs = original_irqs;

	/* Track time spent here in an interrupt context. */
	old_regs = set_irq_regs(regs);
	irq_enter();

	#ifdef CONFIG_DEBUG_STACKOVERFLOW
	/* Debugging check for stack overflow: less than 1/8th stack free? */
	{
	long sp = stack_pointer - (long) current_thread_info();
	if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
	pr_emerg("tile_dev_intr: "
	"stack overflow: %ld\n",
	sp - sizeof(struct thread_info));
	dump_stack();
	}
	}
	#endif
	while (remaining_irqs) {
	unsigned long irq = __ffs(remaining_irqs);
	remaining_irqs &= ~(1UL << irq);

	/* Count device irqs; Linux IPIs are counted elsewhere. */
	if (irq != IRQ_RESCHEDULE)
	__get_cpu_var(irq_stat).irq_dev_intr_count++;

	generic_handle_irq(irq);
	}

	/*
	* If we weren't nested, turn on all enabled interrupts,
	* including any that were reenabled during interrupt
	* handling.
	*/
	if (depth == 0)
	unmask_irqs(~__get_cpu_var(irq_disable_mask));

	__get_cpu_var(irq_depth)--;

	/*
	* Track time spent against the current process again and
	* process any softirqs if they are waiting.
	*/
	irq_exit();
	set_irq_regs(old_regs);
	}


	/*
	* Remove an irq from the disabled mask. If we're in an interrupt
	* context, defer enabling the HW interrupt until we leave.
	*/
	static void tile_irq_chip_enable(struct irq_data *d)
	{
	get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq);
	if (__get_cpu_var(irq_depth) == 0)
	unmask_irqs(1UL << d->irq);
	put_cpu_var(irq_disable_mask);
	}

	/*
	* Add an irq to the disabled mask. We disable the HW interrupt
	* immediately so that there's no possibility of it firing. If we're
	* in an interrupt context, the return path is careful to avoid
	* unmasking a newly disabled interrupt.
	*/
	static void tile_irq_chip_disable(struct irq_data *d)
	{
	get_cpu_var(irq_disable_mask) \|= (1UL << d->irq);
	mask_irqs(1UL << d->irq);
	put_cpu_var(irq_disable_mask);
	}

	/* Mask an interrupt. */
	static void tile_irq_chip_mask(struct irq_data *d)
	{
	mask_irqs(1UL << d->irq);
	}

	/* Unmask an interrupt. */
	static void tile_irq_chip_unmask(struct irq_data *d)
	{
	unmask_irqs(1UL << d->irq);
	}

	/*
	* Clear an interrupt before processing it so that any new assertions
	* will trigger another irq.
	*/
	static void tile_irq_chip_ack(struct irq_data *d)
	{
	if ((unsigned long)irq_data_get_irq_chip_data(d) != IS_HW_CLEARED)
	clear_irqs(1UL << d->irq);
	}

	/*
	* For per-cpu interrupts, we need to avoid unmasking any interrupts
	* that we disabled via disable_percpu_irq().
	*/
	static void tile_irq_chip_eoi(struct irq_data *d)
	{
	if (!(__get_cpu_var(irq_disable_mask) & (1UL << d->irq)))
	unmask_irqs(1UL << d->irq);
	}

	static struct irq_chip tile_irq_chip = {
	.name = "tile_irq_chip",
	.irq_enable = tile_irq_chip_enable,
	.irq_disable = tile_irq_chip_disable,
	.irq_ack = tile_irq_chip_ack,
	.irq_eoi = tile_irq_chip_eoi,
	.irq_mask = tile_irq_chip_mask,
	.irq_unmask = tile_irq_chip_unmask,
	};

	void __init init_IRQ(void)
	{
	ipi_init();
	}

	void setup_irq_regs(void)
	{
	/* Enable interrupt delivery. */
	unmask_irqs(~0UL);
	#if CHIP_HAS_IPI()
	arch_local_irq_unmask(INT_IPI_K);
	#endif
	}

	void tile_irq_activate(unsigned int irq, int tile_irq_type)
	{
	/*
	* We use handle_level_irq() by default because the pending
	* interrupt vector (whether modeled by the HV on
	* TILEPro or implemented in hardware on TILE-Gx) has
	* level-style semantics for each bit. An interrupt fires
	* whenever a bit is high, not just at edges.
	*/
	irq_flow_handler_t handle = handle_level_irq;
	if (tile_irq_type == TILE_IRQ_PERCPU)
	handle = handle_percpu_irq;
	irq_set_chip_and_handler(irq, &tile_irq_chip, handle);

	/*
	* Flag interrupts that are hardware-cleared so that ack()
	* won't clear them.
	*/
	if (tile_irq_type == TILE_IRQ_HW_CLEAR)
	irq_set_chip_data(irq, (void *)IS_HW_CLEARED);
	}
	EXPORT_SYMBOL(tile_irq_activate);


	void ack_bad_irq(unsigned int irq)
	{
	pr_err("unexpected IRQ trap at vector %02x\n", irq);
	}

	/*
	* Generic, controller-independent functions:
	*/

	#if CHIP_HAS_IPI()
	int create_irq(void)
	{
	unsigned long flags;
	int result;

	spin_lock_irqsave(&available_irqs_lock, flags);
	if (available_irqs == 0)
	result = -ENOMEM;
	else {
	result = __ffs(available_irqs);
	available_irqs &= ~(1UL << result);
	dynamic_irq_init(result);
	}
	spin_unlock_irqrestore(&available_irqs_lock, flags);

	return result;
	}
	EXPORT_SYMBOL(create_irq);

	void destroy_irq(unsigned int irq)
	{
	unsigned long flags;

	spin_lock_irqsave(&available_irqs_lock, flags);
	available_irqs \|= (1UL << irq);
	dynamic_irq_cleanup(irq);
	spin_unlock_irqrestore(&available_irqs_lock, flags);
	}
	EXPORT_SYMBOL(destroy_irq);
	#endif