| /* |
| * Driver for the 1250-EV1 audio I/O module |
| * |
| * Copyright 2011 Wolfson Microelectronics plc |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/gpio.h> |
| |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/wm1250-ev1.h> |
| |
| static const char *wm1250_gpio_names[WM1250_EV1_NUM_GPIOS] = { |
| "WM1250 CLK_ENA", |
| "WM1250 CLK_SEL0", |
| "WM1250 CLK_SEL1", |
| "WM1250 OSR", |
| "WM1250 MASTER", |
| }; |
| |
| struct wm1250_priv { |
| struct gpio gpios[WM1250_EV1_NUM_GPIOS]; |
| }; |
| |
| static int wm1250_ev1_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct wm1250_priv *wm1250 = dev_get_drvdata(codec->dev); |
| int ena; |
| |
| if (wm1250) |
| ena = wm1250->gpios[WM1250_EV1_GPIO_CLK_ENA].gpio; |
| else |
| ena = -1; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| break; |
| |
| case SND_SOC_BIAS_PREPARE: |
| break; |
| |
| case SND_SOC_BIAS_STANDBY: |
| if (ena >= 0) |
| gpio_set_value_cansleep(ena, 1); |
| break; |
| |
| case SND_SOC_BIAS_OFF: |
| if (ena >= 0) |
| gpio_set_value_cansleep(ena, 0); |
| break; |
| } |
| |
| codec->dapm.bias_level = level; |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = { |
| SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0), |
| |
| SND_SOC_DAPM_INPUT("WM1250 Input"), |
| SND_SOC_DAPM_OUTPUT("WM1250 Output"), |
| }; |
| |
| static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = { |
| { "ADC", NULL, "WM1250 Input" }, |
| { "WM1250 Output", NULL, "DAC" }, |
| }; |
| |
| static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct wm1250_priv *wm1250 = snd_soc_codec_get_drvdata(dai->codec); |
| |
| switch (params_rate(params)) { |
| case 8000: |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, |
| 1); |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, |
| 1); |
| break; |
| case 16000: |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, |
| 0); |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, |
| 1); |
| break; |
| case 32000: |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, |
| 1); |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, |
| 0); |
| break; |
| case 64000: |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, |
| 0); |
| gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, |
| 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops wm1250_ev1_ops = { |
| .hw_params = wm1250_ev1_hw_params, |
| }; |
| |
| #define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ |
| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000) |
| |
| static struct snd_soc_dai_driver wm1250_ev1_dai = { |
| .name = "wm1250-ev1", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM1250_EV1_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM1250_EV1_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .ops = &wm1250_ev1_ops, |
| }; |
| |
| static struct snd_soc_codec_driver soc_codec_dev_wm1250_ev1 = { |
| .dapm_widgets = wm1250_ev1_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets), |
| .dapm_routes = wm1250_ev1_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes), |
| |
| .set_bias_level = wm1250_ev1_set_bias_level, |
| .idle_bias_off = true, |
| }; |
| |
| static int wm1250_ev1_pdata(struct i2c_client *i2c) |
| { |
| struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev); |
| struct wm1250_priv *wm1250; |
| int i, ret; |
| |
| if (!pdata) |
| return 0; |
| |
| wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL); |
| if (!wm1250) { |
| dev_err(&i2c->dev, "Unable to allocate private data\n"); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm1250->gpios); i++) { |
| wm1250->gpios[i].gpio = pdata->gpios[i]; |
| wm1250->gpios[i].label = wm1250_gpio_names[i]; |
| wm1250->gpios[i].flags = GPIOF_OUT_INIT_LOW; |
| } |
| wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH; |
| wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH; |
| |
| ret = gpio_request_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios)); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to get GPIOs: %d\n", ret); |
| goto err; |
| } |
| |
| dev_set_drvdata(&i2c->dev, wm1250); |
| |
| return ret; |
| |
| err: |
| return ret; |
| } |
| |
| static void wm1250_ev1_free(struct i2c_client *i2c) |
| { |
| struct wm1250_priv *wm1250 = dev_get_drvdata(&i2c->dev); |
| |
| if (wm1250) |
| gpio_free_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios)); |
| } |
| |
| static int wm1250_ev1_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *i2c_id) |
| { |
| int id, board, rev, ret; |
| |
| dev_set_drvdata(&i2c->dev, NULL); |
| |
| board = i2c_smbus_read_byte_data(i2c, 0); |
| if (board < 0) { |
| dev_err(&i2c->dev, "Failed to read ID: %d\n", board); |
| return board; |
| } |
| |
| id = (board & 0xfe) >> 2; |
| rev = board & 0x3; |
| |
| if (id != 1) { |
| dev_err(&i2c->dev, "Unknown board ID %d\n", id); |
| return -ENODEV; |
| } |
| |
| dev_info(&i2c->dev, "revision %d\n", rev + 1); |
| |
| ret = wm1250_ev1_pdata(i2c); |
| if (ret != 0) |
| return ret; |
| |
| ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm1250_ev1, |
| &wm1250_ev1_dai, 1); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); |
| wm1250_ev1_free(i2c); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int wm1250_ev1_remove(struct i2c_client *i2c) |
| { |
| snd_soc_unregister_codec(&i2c->dev); |
| wm1250_ev1_free(i2c); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm1250_ev1_i2c_id[] = { |
| { "wm1250-ev1", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id); |
| |
| static struct i2c_driver wm1250_ev1_i2c_driver = { |
| .driver = { |
| .name = "wm1250-ev1", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm1250_ev1_probe, |
| .remove = wm1250_ev1_remove, |
| .id_table = wm1250_ev1_i2c_id, |
| }; |
| |
| module_i2c_driver(wm1250_ev1_i2c_driver); |
| |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver"); |
| MODULE_LICENSE("GPL"); |