blob: d05decb2ca99a0f1ec80fa31f64eaf9e805f906b [file] [log] [blame]
config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on PLAT_SAMSUNG
select S3C2410_DMA if ARCH_S3C24XX
select S3C64XX_PL080 if ARCH_S3C64XX
select SND_S3C_DMA if !ARCH_S3C24XX
select SND_S3C_DMA_LEGACY if ARCH_S3C24XX
select SND_SOC_GENERIC_DMAENGINE_PCM if !ARCH_S3C24XX
help
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.
config SND_S3C_DMA
tristate
config SND_S3C_DMA_LEGACY
tristate
config SND_S3C24XX_I2S
tristate
select S3C24XX_DMA
config SND_S3C_I2SV2_SOC
tristate
config SND_S3C2412_SOC_I2S
tristate
select SND_S3C_I2SV2_SOC
select S3C2410_DMA
config SND_SAMSUNG_PCM
tristate
config SND_SAMSUNG_AC97
tristate
select SND_SOC_AC97_BUS
config SND_SAMSUNG_SPDIF
tristate
select SND_SOC_SPDIF
config SND_SAMSUNG_I2S
tristate
config SND_SOC_SAMSUNG_NEO1973_WM8753
tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
select SND_S3C24XX_I2S
select SND_SOC_WM8753
select SND_SOC_BT_SCO
help
Say Y here to enable audio support for the Openmoko Neo1973
Smartphones.
config SND_SOC_SAMSUNG_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
depends on SND_SOC_SAMSUNG && MACH_JIVE
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
Say Y if you want to add support for SoC audio on the Jive.
config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110)
select SND_SOC_WM8580
select SND_SAMSUNG_I2S
help
Say Y if you want to add support for SoC audio on the SMDKs.
config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
select SND_SAMSUNG_I2S
help
Say Y if you want to add support for SoC audio on the SMDKs.
config SND_SOC_SAMSUNG_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
depends on SND_SOC_SAMSUNG && MACH_SMDK2443
select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
help
Say Y if you want to add support for SoC audio on smdk2443
with the WM9710.
config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
help
Say Y if you want to add support for SoC audio on ln2440sbc
with the ALC650.
config SND_SOC_SAMSUNG_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
config SND_SOC_SAMSUNG_SIMTEC
tristate
help
Internal node for common S3C24XX/Simtec suppor
config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC23
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_HERMES
tristate "SoC I2S Audio support for Simtec Hermes board"
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC3X
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_H1940_UDA1380
tristate "Audio support for the HP iPAQ H1940"
depends on SND_SOC_SAMSUNG && ARCH_H1940
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
This driver provides audio support for HP iPAQ h1940 PDA.
config SND_SOC_SAMSUNG_RX1950_UDA1380
tristate "Audio support for the HP iPAQ RX1950"
depends on SND_SOC_SAMSUNG && MACH_RX1950
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
This driver provides audio support for HP iPAQ RX1950 PDA.
config SND_SOC_SAMSUNG_SMDK_WM9713
tristate "SoC AC97 Audio support for SMDK with WM9713"
depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
select SND_SOC_WM9713
select SND_SAMSUNG_AC97
help
Say Y if you want to add support for SoC audio on the SMDK.
config SND_SOC_SMARTQ
tristate "SoC I2S Audio support for SmartQ board"
depends on SND_SOC_SAMSUNG && MACH_SMARTQ
select SND_SAMSUNG_I2S
select SND_SOC_WM8750
config SND_SOC_GONI_AQUILA_WM8994
tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
depends on I2C=y
select SND_SAMSUNG_I2S
select MFD_WM8994
select SND_SOC_WM8994
help
Say Y if you want to add support for SoC audio on goni or aquila
with the WM8994.
config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
depends on SND_SOC_SAMSUNG
select SND_SAMSUNG_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
config SND_SOC_SMDK_WM8580_PCM
tristate "SoC PCM Audio support for WM8580 on SMDK"
depends on SND_SOC_SAMSUNG && (MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110)
select SND_SOC_WM8580
select SND_SAMSUNG_PCM
help
Say Y if you want to add support for SoC audio on the SMDK.
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
select SND_SAMSUNG_PCM
help
Say Y if you want to add support for SoC audio on the SMDK
config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
select SND_SOC_WM9081
select SND_SOC_WM0010
select SND_SOC_WM1250_EV1
config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
select SND_SAMSUNG_I2S
select SND_SOC_WM8962
config SND_SOC_BELLS
tristate "Audio support for Wolfson Bells"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && MFD_ARIZONA
select SND_SAMSUNG_I2S
select SND_SOC_WM5102
select SND_SOC_WM5110
select SND_SOC_WM9081
select SND_SOC_WM0010
select SND_SOC_WM1250_EV1
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
select SND_SAMSUNG_I2S
select SND_SOC_WM5100
select SND_SOC_WM9081
config SND_SOC_LITTLEMILL
tristate "Audio support for Wolfson Littlemill"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
select SND_SAMSUNG_I2S
select MFD_WM8994
select SND_SOC_WM8994
config SND_SOC_SMDK_I2S_STUB
tristate "SoC I2S Audio support for boards without external codec chip"
depends on SND_SOC_SAMSUNG
select SND_SAMSUNG_I2S
select SND_SOC_I2S_STUB
help
Say Y if you want to add support for SoC audio on boards without
exteral codec chip.