arch/arm/boot/dts/imx6sl-evk.dts

/*
 * Copyright (C) 2013 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "imx6sl.dtsi"

/ {
	model = "Freescale i.MX6 SoloLite EVK Board";
	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";

	memory {
		reg = <0x80000000 0x40000000>;
	};

	regulators {
		compatible = "simple-bus";

		reg_usb_otg1_vbus: usb_otg1_vbus {
			compatible = "regulator-fixed";
			regulator-name = "usb_otg1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 0 0>;
			enable-active-high;
		};

		reg_usb_otg2_vbus: usb_otg2_vbus {
			compatible = "regulator-fixed";
			regulator-name = "usb_otg2_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 2 0>;
			enable-active-high;
		};
	};
};

&ecspi1 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio4 11 0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1_1>;
	status = "okay";

	flash: m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "st,m25p32";
		spi-max-frequency = <20000000>;
		reg = <0>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec_1>;
	phy-mode = "rmii";
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	hog {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
			>;
		};
	};
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1_1>;
	status = "okay";
};

&usbotg1 {
	vbus-supply = <&reg_usb_otg1_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1_1>;
	disable-over-current;
	status = "okay";
};

&usbotg2 {
	vbus-supply = <&reg_usb_otg2_vbus>;
	dr_mode = "host";
	disable-over-current;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1_1>;
	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
	bus-width = <8>;
	cd-gpios = <&gpio4 7 0>;
	wp-gpios = <&gpio4 6 0>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2_1>;
	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
	cd-gpios = <&gpio5 0 0>;
	wp-gpios = <&gpio4 29 0>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3_1>;
	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
	cd-gpios = <&gpio3 22 0>;
	status = "okay";
};