| /* |
| * Device Tree Source for IGEP COM Module |
| * |
| * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> |
| * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include "omap3-igep.dtsi" |
| |
| / { |
| model = "IGEP COM Module"; |
| compatible = "isee,omap3-igep0030", "ti,omap3"; |
| |
| leds { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&leds_pins>; |
| compatible = "gpio-leds"; |
| |
| boot { |
| label = "omap3:green:boot"; |
| gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; |
| default-state = "on"; |
| }; |
| |
| user0 { |
| label = "omap3:red:user0"; |
| gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ |
| default-state = "off"; |
| }; |
| |
| user1 { |
| label = "omap3:green:user1"; |
| gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ |
| default-state = "off"; |
| }; |
| |
| user2 { |
| label = "omap3:red:user1"; |
| gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &leds_pins { |
| pinctrl-single,pins = < |
| 0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ |
| >; |
| }; |
| |
| &gpmc { |
| ranges = <0 0 0x00000000 0x20000000>; |
| |
| nand@0,0 { |
| linux,mtd-name= "micron,mt29c4g96maz"; |
| reg = <0 0 0>; |
| nand-bus-width = <16>; |
| ti,nand-ecc-opt = "bch8"; |
| |
| gpmc,sync-clk-ps = <0>; |
| gpmc,cs-on-ns = <0>; |
| gpmc,cs-rd-off-ns = <44>; |
| gpmc,cs-wr-off-ns = <44>; |
| gpmc,adv-on-ns = <6>; |
| gpmc,adv-rd-off-ns = <34>; |
| gpmc,adv-wr-off-ns = <44>; |
| gpmc,we-off-ns = <40>; |
| gpmc,oe-off-ns = <54>; |
| gpmc,access-ns = <64>; |
| gpmc,rd-cycle-ns = <82>; |
| gpmc,wr-cycle-ns = <82>; |
| gpmc,wr-access-ns = <40>; |
| gpmc,wr-data-mux-bus-ns = <0>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "SPL"; |
| reg = <0 0x100000>; |
| }; |
| partition@80000 { |
| label = "U-Boot"; |
| reg = <0x100000 0x180000>; |
| }; |
| partition@1c0000 { |
| label = "Environment"; |
| reg = <0x280000 0x100000>; |
| }; |
| partition@280000 { |
| label = "Kernel"; |
| reg = <0x380000 0x300000>; |
| }; |
| partition@780000 { |
| label = "Filesystem"; |
| reg = <0x680000 0x1f980000>; |
| }; |
| }; |
| }; |
