blob: d36efc13b16fbd0dd2d34be0561acd53e1282289 [file] [log] [blame]
/*
* Copyright (C) 2012 Texas Instruments
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "drm_flip_work.h"
#include "tilcdc_drv.h"
#include "tilcdc_regs.h"
struct tilcdc_crtc {
struct drm_crtc base;
const struct tilcdc_panel_info *info;
uint32_t dirty;
dma_addr_t start, end;
struct drm_pending_vblank_event *event;
int dpms;
wait_queue_head_t frame_done_wq;
bool frame_done;
/* fb currently set to scanout 0/1: */
struct drm_framebuffer *scanout[2];
/* for deferred fb unref's: */
struct drm_flip_work unref_work;
};
#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
static void unref_worker(struct drm_flip_work *work, void *val)
{
struct tilcdc_crtc *tilcdc_crtc =
container_of(work, struct tilcdc_crtc, unref_work);
struct drm_device *dev = tilcdc_crtc->base.dev;
mutex_lock(&dev->mode_config.mutex);
drm_framebuffer_unreference(val);
mutex_unlock(&dev->mode_config.mutex);
}
static void set_scanout(struct drm_crtc *crtc, int n)
{
static const uint32_t base_reg[] = {
LCDC_DMA_FB_BASE_ADDR_0_REG,
LCDC_DMA_FB_BASE_ADDR_1_REG,
};
static const uint32_t ceil_reg[] = {
LCDC_DMA_FB_CEILING_ADDR_0_REG,
LCDC_DMA_FB_CEILING_ADDR_1_REG,
};
static const uint32_t stat[] = {
LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1,
};
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
pm_runtime_get_sync(dev->dev);
tilcdc_write(dev, base_reg[n], tilcdc_crtc->start);
tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end);
if (tilcdc_crtc->scanout[n]) {
drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->scanout[n]);
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
}
tilcdc_crtc->scanout[n] = crtc->fb;
drm_framebuffer_reference(tilcdc_crtc->scanout[n]);
tilcdc_crtc->dirty &= ~stat[n];
pm_runtime_put_sync(dev->dev);
}
static void update_scanout(struct drm_crtc *crtc)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_framebuffer *fb = crtc->fb;
struct drm_gem_cma_object *gem;
unsigned int depth, bpp;
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
gem = drm_fb_cma_get_gem_obj(fb, 0);
tilcdc_crtc->start = gem->paddr + fb->offsets[0] +
(crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
tilcdc_crtc->end = tilcdc_crtc->start +
(crtc->mode.vdisplay * fb->pitches[0]);
if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) {
/* already enabled, so just mark the frames that need
* updating and they will be updated on vblank:
*/
tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1;
drm_vblank_get(dev, 0);
} else {
/* not enabled yet, so update registers immediately: */
set_scanout(crtc, 0);
set_scanout(crtc, 1);
}
}
static void start(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
if (priv->rev == 2) {
tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
msleep(1);
tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
msleep(1);
}
tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
}
static void stop(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
}
static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
WARN_ON(tilcdc_crtc->dpms == DRM_MODE_DPMS_ON);
drm_crtc_cleanup(crtc);
drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
kfree(tilcdc_crtc);
}
static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t page_flip_flags)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
if (tilcdc_crtc->event) {
dev_err(dev->dev, "already pending page flip!\n");
return -EBUSY;
}
crtc->fb = fb;
tilcdc_crtc->event = event;
update_scanout(crtc);
return 0;
}
static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
/* we really only care about on or off: */
if (mode != DRM_MODE_DPMS_ON)
mode = DRM_MODE_DPMS_OFF;
if (tilcdc_crtc->dpms == mode)
return;
tilcdc_crtc->dpms = mode;
pm_runtime_get_sync(dev->dev);
if (mode == DRM_MODE_DPMS_ON) {
pm_runtime_forbid(dev->dev);
start(crtc);
} else {
tilcdc_crtc->frame_done = false;
stop(crtc);
/*
* if necessary wait for framedone irq which will still come
* before putting things to sleep..
*/
if (priv->rev == 2) {
int ret = wait_event_timeout(
tilcdc_crtc->frame_done_wq,
tilcdc_crtc->frame_done,
msecs_to_jiffies(50));
if (ret == 0)
dev_err(dev->dev, "timeout waiting for framedone\n");
}
pm_runtime_allow(dev->dev);
}
pm_runtime_put_sync(dev->dev);
}
static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
return true;
}
static void tilcdc_crtc_prepare(struct drm_crtc *crtc)
{
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
static void tilcdc_crtc_commit(struct drm_crtc *crtc)
{
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
}
static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
const struct tilcdc_panel_info *info = tilcdc_crtc->info;
uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
int ret;
ret = tilcdc_crtc_mode_valid(crtc, mode);
if (WARN_ON(ret))
return ret;
if (WARN_ON(!info))
return -EINVAL;
pm_runtime_get_sync(dev->dev);
/* Configure the Burst Size and fifo threshold of DMA: */
reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
switch (info->dma_burst_sz) {
case 1:
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
break;
case 2:
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
break;
case 4:
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
break;
case 8:
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
break;
case 16:
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
break;
default:
return -EINVAL;
}
reg |= (info->fifo_th << 8);
tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
/* Configure timings: */
hbp = mode->htotal - mode->hsync_end;
hfp = mode->hsync_start - mode->hdisplay;
hsw = mode->hsync_end - mode->hsync_start;
vbp = mode->vtotal - mode->vsync_end;
vfp = mode->vsync_start - mode->vdisplay;
vsw = mode->vsync_end - mode->vsync_start;
DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
/* Configure the AC Bias Period and Number of Transitions per Interrupt: */
reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
/*
* subtract one from hfp, hbp, hsw because the hardware uses
* a value of 0 as 1
*/
if (priv->rev == 2) {
/* clear bits we're going to set */
reg &= ~0x78000033;
reg |= ((hfp-1) & 0x300) >> 8;
reg |= ((hbp-1) & 0x300) >> 4;
reg |= ((hsw-1) & 0x3c0) << 21;
}
tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
reg = (((mode->hdisplay >> 4) - 1) << 4) |
(((hbp-1) & 0xff) << 24) |
(((hfp-1) & 0xff) << 16) |
(((hsw-1) & 0x3f) << 10);
if (priv->rev == 2)
reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
reg = ((mode->vdisplay - 1) & 0x3ff) |
((vbp & 0xff) << 24) |
((vfp & 0xff) << 16) |
(((vsw-1) & 0x3f) << 10);
tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
/*
* be sure to set Bit 10 for the V2 LCDC controller,
* otherwise limited to 1024 pixels width, stopping
* 1920x1080 being suppoted.
*/
if (priv->rev == 2) {
if ((mode->vdisplay - 1) & 0x400) {
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
LCDC_LPP_B10);
} else {
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
LCDC_LPP_B10);
}
}
/* Configure display type: */
reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | 0x000ff000);
reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
if (info->tft_alt_mode)
reg |= LCDC_TFT_ALT_ENABLE;
if (priv->rev == 2) {
unsigned int depth, bpp;
drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
switch (bpp) {
case 16:
break;
case 32:
reg |= LCDC_V2_TFT_24BPP_UNPACK;
/* fallthrough */
case 24:
reg |= LCDC_V2_TFT_24BPP_MODE;
break;
default:
dev_err(dev->dev, "invalid pixel format\n");
return -EINVAL;
}
}
reg |= info->fdd < 12;
tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
if (info->invert_pxl_clk)
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
if (info->sync_ctrl)
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
if (info->sync_edge)
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
/*
* use value from adjusted_mode here as this might have been
* changed as part of the fixup for slave encoders to solve the
* issue where tilcdc timings are not VESA compliant
*/
if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
else
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
if (info->raster_order)
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
else
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
update_scanout(crtc);
tilcdc_crtc_update_clk(crtc);
pm_runtime_put_sync(dev->dev);
return 0;
}
static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
update_scanout(crtc);
return 0;
}
static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
.destroy = tilcdc_crtc_destroy,
.set_config = drm_crtc_helper_set_config,
.page_flip = tilcdc_crtc_page_flip,
};
static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
.dpms = tilcdc_crtc_dpms,
.mode_fixup = tilcdc_crtc_mode_fixup,
.prepare = tilcdc_crtc_prepare,
.commit = tilcdc_crtc_commit,
.mode_set = tilcdc_crtc_mode_set,
.mode_set_base = tilcdc_crtc_mode_set_base,
};
int tilcdc_crtc_max_width(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
int max_width = 0;
if (priv->rev == 1)
max_width = 1024;
else if (priv->rev == 2)
max_width = 2048;
return max_width;
}
int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
{
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
unsigned int bandwidth;
uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
/*
* check to see if the width is within the range that
* the LCD Controller physically supports
*/
if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
return MODE_VIRTUAL_X;
/* width must be multiple of 16 */
if (mode->hdisplay & 0xf)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 2048)
return MODE_VIRTUAL_Y;
DBG("Processing mode %dx%d@%d with pixel clock %d",
mode->hdisplay, mode->vdisplay,
drm_mode_vrefresh(mode), mode->clock);
hbp = mode->htotal - mode->hsync_end;
hfp = mode->hsync_start - mode->hdisplay;
hsw = mode->hsync_end - mode->hsync_start;
vbp = mode->vtotal - mode->vsync_end;
vfp = mode->vsync_start - mode->vdisplay;
vsw = mode->vsync_end - mode->vsync_start;
if ((hbp-1) & ~0x3ff) {
DBG("Pruning mode: Horizontal Back Porch out of range");
return MODE_HBLANK_WIDE;
}
if ((hfp-1) & ~0x3ff) {
DBG("Pruning mode: Horizontal Front Porch out of range");
return MODE_HBLANK_WIDE;
}
if ((hsw-1) & ~0x3ff) {
DBG("Pruning mode: Horizontal Sync Width out of range");
return MODE_HSYNC_WIDE;
}
if (vbp & ~0xff) {
DBG("Pruning mode: Vertical Back Porch out of range");
return MODE_VBLANK_WIDE;
}
if (vfp & ~0xff) {
DBG("Pruning mode: Vertical Front Porch out of range");
return MODE_VBLANK_WIDE;
}
if ((vsw-1) & ~0x3f) {
DBG("Pruning mode: Vertical Sync Width out of range");
return MODE_VSYNC_WIDE;
}
/*
* some devices have a maximum allowed pixel clock
* configured from the DT
*/
if (mode->clock > priv->max_pixelclock) {
DBG("Pruning mode: pixel clock too high");
return MODE_CLOCK_HIGH;
}
/*
* some devices further limit the max horizontal resolution
* configured from the DT
*/
if (mode->hdisplay > priv->max_width)
return MODE_BAD_WIDTH;
/* filter out modes that would require too much memory bandwidth: */
bandwidth = mode->hdisplay * mode->vdisplay *
drm_mode_vrefresh(mode);
if (bandwidth > priv->max_bandwidth) {
DBG("Pruning mode: exceeds defined bandwidth limit");
return MODE_BAD;
}
return MODE_OK;
}
void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
const struct tilcdc_panel_info *info)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
tilcdc_crtc->info = info;
}
void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
int dpms = tilcdc_crtc->dpms;
unsigned int lcd_clk, div;
int ret;
pm_runtime_get_sync(dev->dev);
if (dpms == DRM_MODE_DPMS_ON)
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
/* in raster mode, minimum divisor is 2: */
ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2);
if (ret) {
dev_err(dev->dev, "failed to set display clock rate to: %d\n",
crtc->mode.clock);
goto out;
}
lcd_clk = clk_get_rate(priv->clk);
div = lcd_clk / (crtc->mode.clock * 1000);
DBG("lcd_clk=%u, mode clock=%d, div=%u", lcd_clk, crtc->mode.clock, div);
DBG("fck=%lu, dpll_disp_ck=%lu", clk_get_rate(priv->clk), clk_get_rate(priv->disp_clk));
/* Configure the LCD clock divisor. */
tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) |
LCDC_RASTER_MODE);
if (priv->rev == 2)
tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
LCDC_V2_CORE_CLK_EN);
if (dpms == DRM_MODE_DPMS_ON)
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
out:
pm_runtime_put_sync(dev->dev);
}
irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
uint32_t stat = tilcdc_read_irqstatus(dev);
if ((stat & LCDC_SYNC_LOST) && (stat & LCDC_FIFO_UNDERFLOW)) {
stop(crtc);
dev_err(dev->dev, "error: %08x\n", stat);
tilcdc_clear_irqstatus(dev, stat);
start(crtc);
} else if (stat & LCDC_PL_LOAD_DONE) {
tilcdc_clear_irqstatus(dev, stat);
} else {
struct drm_pending_vblank_event *event;
unsigned long flags;
uint32_t dirty = tilcdc_crtc->dirty & stat;
tilcdc_clear_irqstatus(dev, stat);
if (dirty & LCDC_END_OF_FRAME0)
set_scanout(crtc, 0);
if (dirty & LCDC_END_OF_FRAME1)
set_scanout(crtc, 1);
drm_handle_vblank(dev, 0);
spin_lock_irqsave(&dev->event_lock, flags);
event = tilcdc_crtc->event;
tilcdc_crtc->event = NULL;
if (event)
drm_send_vblank_event(dev, 0, event);
spin_unlock_irqrestore(&dev->event_lock, flags);
if (dirty && !tilcdc_crtc->dirty)
drm_vblank_put(dev, 0);
}
if (priv->rev == 2) {
if (stat & LCDC_FRAME_DONE) {
tilcdc_crtc->frame_done = true;
wake_up(&tilcdc_crtc->frame_done_wq);
}
tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
}
return IRQ_HANDLED;
}
void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_pending_vblank_event *event;
struct drm_device *dev = crtc->dev;
unsigned long flags;
/* Destroy the pending vertical blanking event associated with the
* pending page flip, if any, and disable vertical blanking interrupts.
*/
spin_lock_irqsave(&dev->event_lock, flags);
event = tilcdc_crtc->event;
if (event && event->base.file_priv == file) {
tilcdc_crtc->event = NULL;
event->base.destroy(&event->base);
drm_vblank_put(dev, 0);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
{
struct tilcdc_crtc *tilcdc_crtc;
struct drm_crtc *crtc;
int ret;
tilcdc_crtc = kzalloc(sizeof(*tilcdc_crtc), GFP_KERNEL);
if (!tilcdc_crtc) {
dev_err(dev->dev, "allocation failed\n");
return NULL;
}
crtc = &tilcdc_crtc->base;
tilcdc_crtc->dpms = DRM_MODE_DPMS_OFF;
init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
ret = drm_flip_work_init(&tilcdc_crtc->unref_work, 16,
"unref", unref_worker);
if (ret) {
dev_err(dev->dev, "could not allocate unref FIFO\n");
goto fail;
}
ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs);
if (ret < 0)
goto fail;
drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
return crtc;
fail:
tilcdc_crtc_destroy(crtc);
return NULL;
}