| /* |
| * AMD 10Gb Ethernet driver |
| * |
| * This file is available to you under your choice of the following two |
| * licenses: |
| * |
| * License 1: GPLv2 |
| * |
| * Copyright (c) 2014 Advanced Micro Devices, Inc. |
| * |
| * This file is free software; you may copy, redistribute and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * The Synopsys DWC ETHER XGMAC Software Driver and documentation |
| * (hereinafter "Software") is an unsupported proprietary work of Synopsys, |
| * Inc. unless otherwise expressly agreed to in writing between Synopsys |
| * and you. |
| * |
| * The Software IS NOT an item of Licensed Software or Licensed Product |
| * under any End User Software License Agreement or Agreement for Licensed |
| * Product with Synopsys or any supplement thereto. Permission is hereby |
| * granted, free of charge, to any person obtaining a copy of this software |
| * annotated with this license and the Software, to deal in the Software |
| * without restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or sell copies |
| * of the Software, and to permit persons to whom the Software is furnished |
| * to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" |
| * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED |
| * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * |
| * License 2: Modified BSD |
| * |
| * Copyright (c) 2014 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * The Synopsys DWC ETHER XGMAC Software Driver and documentation |
| * (hereinafter "Software") is an unsupported proprietary work of Synopsys, |
| * Inc. unless otherwise expressly agreed to in writing between Synopsys |
| * and you. |
| * |
| * The Software IS NOT an item of Licensed Software or Licensed Product |
| * under any End User Software License Agreement or Agreement for Licensed |
| * Product with Synopsys or any supplement thereto. Permission is hereby |
| * granted, free of charge, to any person obtaining a copy of this software |
| * annotated with this license and the Software, to deal in the Software |
| * without restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or sell copies |
| * of the Software, and to permit persons to whom the Software is furnished |
| * to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" |
| * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED |
| * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kmod.h> |
| #include <linux/spinlock.h> |
| #include <linux/mdio.h> |
| #include <linux/phy.h> |
| #include <linux/of.h> |
| |
| #include "xgbe.h" |
| #include "xgbe-common.h" |
| |
| |
| static int xgbe_mdio_read(struct mii_bus *mii, int prtad, int mmd_reg) |
| { |
| struct xgbe_prv_data *pdata = mii->priv; |
| struct xgbe_hw_if *hw_if = &pdata->hw_if; |
| int mmd_data; |
| |
| DBGPR_MDIO("-->xgbe_mdio_read: prtad=%#x mmd_reg=%#x\n", |
| prtad, mmd_reg); |
| |
| mmd_data = hw_if->read_mmd_regs(pdata, prtad, mmd_reg); |
| |
| DBGPR_MDIO("<--xgbe_mdio_read: mmd_data=%#x\n", mmd_data); |
| |
| return mmd_data; |
| } |
| |
| static int xgbe_mdio_write(struct mii_bus *mii, int prtad, int mmd_reg, |
| u16 mmd_val) |
| { |
| struct xgbe_prv_data *pdata = mii->priv; |
| struct xgbe_hw_if *hw_if = &pdata->hw_if; |
| int mmd_data = mmd_val; |
| |
| DBGPR_MDIO("-->xgbe_mdio_write: prtad=%#x mmd_reg=%#x mmd_data=%#x\n", |
| prtad, mmd_reg, mmd_data); |
| |
| hw_if->write_mmd_regs(pdata, prtad, mmd_reg, mmd_data); |
| |
| DBGPR_MDIO("<--xgbe_mdio_write\n"); |
| |
| return 0; |
| } |
| |
| static void xgbe_adjust_link(struct net_device *netdev) |
| { |
| struct xgbe_prv_data *pdata = netdev_priv(netdev); |
| struct xgbe_hw_if *hw_if = &pdata->hw_if; |
| struct phy_device *phydev = pdata->phydev; |
| unsigned long flags; |
| int new_state = 0; |
| |
| if (phydev == NULL) |
| return; |
| |
| DBGPR_MDIO("-->xgbe_adjust_link: address=%d, newlink=%d, curlink=%d\n", |
| phydev->addr, phydev->link, pdata->phy_link); |
| |
| spin_lock_irqsave(&pdata->lock, flags); |
| |
| if (phydev->link) { |
| /* Flow control support */ |
| if (pdata->pause_autoneg) { |
| if (phydev->pause || phydev->asym_pause) { |
| pdata->tx_pause = 1; |
| pdata->rx_pause = 1; |
| } else { |
| pdata->tx_pause = 0; |
| pdata->rx_pause = 0; |
| } |
| } |
| |
| if (pdata->tx_pause != pdata->phy_tx_pause) { |
| hw_if->config_tx_flow_control(pdata); |
| pdata->phy_tx_pause = pdata->tx_pause; |
| } |
| |
| if (pdata->rx_pause != pdata->phy_rx_pause) { |
| hw_if->config_rx_flow_control(pdata); |
| pdata->phy_rx_pause = pdata->rx_pause; |
| } |
| |
| /* Speed support */ |
| if (phydev->speed != pdata->phy_speed) { |
| new_state = 1; |
| |
| switch (phydev->speed) { |
| case SPEED_10000: |
| hw_if->set_xgmii_speed(pdata); |
| break; |
| |
| case SPEED_2500: |
| hw_if->set_gmii_2500_speed(pdata); |
| break; |
| |
| case SPEED_1000: |
| hw_if->set_gmii_speed(pdata); |
| break; |
| } |
| pdata->phy_speed = phydev->speed; |
| } |
| |
| if (phydev->link != pdata->phy_link) { |
| new_state = 1; |
| pdata->phy_link = 1; |
| } |
| } else if (pdata->phy_link) { |
| new_state = 1; |
| pdata->phy_link = 0; |
| pdata->phy_speed = SPEED_UNKNOWN; |
| } |
| |
| if (new_state) |
| phy_print_status(phydev); |
| |
| spin_unlock_irqrestore(&pdata->lock, flags); |
| |
| DBGPR_MDIO("<--xgbe_adjust_link\n"); |
| } |
| |
| void xgbe_dump_phy_registers(struct xgbe_prv_data *pdata) |
| { |
| struct device *dev = pdata->dev; |
| struct phy_device *phydev = pdata->mii->phy_map[XGBE_PRTAD]; |
| int i; |
| |
| dev_alert(dev, "\n************* PHY Reg dump **********************\n"); |
| |
| dev_alert(dev, "PCS Control Reg (%#04x) = %#04x\n", MDIO_CTRL1, |
| XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1)); |
| dev_alert(dev, "PCS Status Reg (%#04x) = %#04x\n", MDIO_STAT1, |
| XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1)); |
| dev_alert(dev, "Phy Id (PHYS ID 1 %#04x)= %#04x\n", MDIO_DEVID1, |
| XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_DEVID1)); |
| dev_alert(dev, "Phy Id (PHYS ID 2 %#04x)= %#04x\n", MDIO_DEVID2, |
| XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_DEVID2)); |
| dev_alert(dev, "Devices in Package (%#04x)= %#04x\n", MDIO_DEVS1, |
| XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_DEVS1)); |
| dev_alert(dev, "Devices in Package (%#04x)= %#04x\n", MDIO_DEVS2, |
| XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_DEVS2)); |
| |
| dev_alert(dev, "Auto-Neg Control Reg (%#04x) = %#04x\n", MDIO_CTRL1, |
| XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_CTRL1)); |
| dev_alert(dev, "Auto-Neg Status Reg (%#04x) = %#04x\n", MDIO_STAT1, |
| XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_STAT1)); |
| dev_alert(dev, "Auto-Neg Ad Reg 1 (%#04x) = %#04x\n", |
| MDIO_AN_ADVERTISE, |
| XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE)); |
| dev_alert(dev, "Auto-Neg Ad Reg 2 (%#04x) = %#04x\n", |
| MDIO_AN_ADVERTISE + 1, |
| XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1)); |
| dev_alert(dev, "Auto-Neg Ad Reg 3 (%#04x) = %#04x\n", |
| MDIO_AN_ADVERTISE + 2, |
| XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2)); |
| dev_alert(dev, "Auto-Neg Completion Reg (%#04x) = %#04x\n", |
| MDIO_AN_COMP_STAT, |
| XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_COMP_STAT)); |
| |
| dev_alert(dev, "MMD Device Mask = %#x\n", |
| phydev->c45_ids.devices_in_package); |
| for (i = 0; i < ARRAY_SIZE(phydev->c45_ids.device_ids); i++) |
| dev_alert(dev, " MMD %d: ID = %#08x\n", i, |
| phydev->c45_ids.device_ids[i]); |
| |
| dev_alert(dev, "\n*************************************************\n"); |
| } |
| |
| int xgbe_mdio_register(struct xgbe_prv_data *pdata) |
| { |
| struct net_device *netdev = pdata->netdev; |
| struct device_node *phy_node; |
| struct mii_bus *mii; |
| struct phy_device *phydev; |
| int ret = 0; |
| |
| DBGPR("-->xgbe_mdio_register\n"); |
| |
| /* Retrieve the phy-handle */ |
| phy_node = of_parse_phandle(pdata->dev->of_node, "phy-handle", 0); |
| if (!phy_node) { |
| dev_err(pdata->dev, "unable to parse phy-handle\n"); |
| return -EINVAL; |
| } |
| |
| /* Register with the MDIO bus */ |
| mii = mdiobus_alloc(); |
| if (mii == NULL) { |
| dev_err(pdata->dev, "mdiobus_alloc failed\n"); |
| ret = -ENOMEM; |
| goto err_node_get; |
| } |
| |
| /* Register on the MDIO bus (don't probe any PHYs) */ |
| mii->name = XGBE_PHY_NAME; |
| mii->read = xgbe_mdio_read; |
| mii->write = xgbe_mdio_write; |
| snprintf(mii->id, sizeof(mii->id), "%s", pdata->mii_bus_id); |
| mii->priv = pdata; |
| mii->phy_mask = ~0; |
| mii->parent = pdata->dev; |
| ret = mdiobus_register(mii); |
| if (ret) { |
| dev_err(pdata->dev, "mdiobus_register failed\n"); |
| goto err_mdiobus_alloc; |
| } |
| DBGPR(" mdiobus_register succeeded for %s\n", pdata->mii_bus_id); |
| |
| /* Probe the PCS using Clause 45 */ |
| phydev = get_phy_device(mii, XGBE_PRTAD, true); |
| if (IS_ERR(phydev) || !phydev || |
| !phydev->c45_ids.device_ids[MDIO_MMD_PCS]) { |
| dev_err(pdata->dev, "get_phy_device failed\n"); |
| ret = phydev ? PTR_ERR(phydev) : -ENOLINK; |
| goto err_mdiobus_register; |
| } |
| request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, |
| MDIO_ID_ARGS(phydev->c45_ids.device_ids[MDIO_MMD_PCS])); |
| |
| of_node_get(phy_node); |
| phydev->dev.of_node = phy_node; |
| ret = phy_device_register(phydev); |
| if (ret) { |
| dev_err(pdata->dev, "phy_device_register failed\n"); |
| of_node_put(phy_node); |
| goto err_phy_device; |
| } |
| |
| /* Add a reference to the PHY driver so it can't be unloaded */ |
| pdata->phy_module = phydev->dev.driver ? |
| phydev->dev.driver->owner : NULL; |
| if (!try_module_get(pdata->phy_module)) { |
| dev_err(pdata->dev, "try_module_get failed\n"); |
| ret = -EIO; |
| goto err_phy_device; |
| } |
| |
| pdata->mii = mii; |
| pdata->mdio_mmd = MDIO_MMD_PCS; |
| |
| pdata->phy_link = -1; |
| pdata->phy_speed = SPEED_UNKNOWN; |
| pdata->phy_tx_pause = pdata->tx_pause; |
| pdata->phy_rx_pause = pdata->rx_pause; |
| |
| ret = phy_connect_direct(netdev, phydev, &xgbe_adjust_link, |
| pdata->phy_mode); |
| if (ret) { |
| netdev_err(netdev, "phy_connect_direct failed\n"); |
| goto err_phy_device; |
| } |
| |
| if (!phydev->drv || (phydev->drv->phy_id == 0)) { |
| netdev_err(netdev, "phy_id not valid\n"); |
| ret = -ENODEV; |
| goto err_phy_connect; |
| } |
| DBGPR(" phy_connect_direct succeeded for PHY %s, link=%d\n", |
| dev_name(&phydev->dev), phydev->link); |
| |
| phydev->autoneg = pdata->default_autoneg; |
| if (phydev->autoneg == AUTONEG_DISABLE) { |
| /* Add settings needed to force speed */ |
| phydev->supported |= SUPPORTED_1000baseT_Full; |
| phydev->supported |= SUPPORTED_10000baseT_Full; |
| |
| phydev->speed = pdata->default_speed; |
| phydev->duplex = DUPLEX_FULL; |
| |
| phydev->advertising &= ~ADVERTISED_Autoneg; |
| } |
| |
| pdata->phydev = phydev; |
| |
| of_node_put(phy_node); |
| |
| DBGPHY_REGS(pdata); |
| |
| DBGPR("<--xgbe_mdio_register\n"); |
| |
| return 0; |
| |
| err_phy_connect: |
| phy_disconnect(phydev); |
| |
| err_phy_device: |
| phy_device_free(phydev); |
| |
| err_mdiobus_register: |
| mdiobus_unregister(mii); |
| |
| err_mdiobus_alloc: |
| mdiobus_free(mii); |
| |
| err_node_get: |
| of_node_put(phy_node); |
| |
| return ret; |
| } |
| |
| void xgbe_mdio_unregister(struct xgbe_prv_data *pdata) |
| { |
| DBGPR("-->xgbe_mdio_unregister\n"); |
| |
| phy_disconnect(pdata->phydev); |
| pdata->phydev = NULL; |
| |
| module_put(pdata->phy_module); |
| pdata->phy_module = NULL; |
| |
| mdiobus_unregister(pdata->mii); |
| pdata->mii->priv = NULL; |
| |
| mdiobus_free(pdata->mii); |
| pdata->mii = NULL; |
| |
| DBGPR("<--xgbe_mdio_unregister\n"); |
| } |