| /* |
| * drivers/net/phy/at803x.c |
| * |
| * Driver for Atheros 803x PHY |
| * |
| * Author: Matus Ujhelyi <ujhelyi.m@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/phy.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| |
| #define AT803X_INTR_ENABLE 0x12 |
| #define AT803X_INTR_STATUS 0x13 |
| #define AT803X_WOL_ENABLE 0x01 |
| #define AT803X_DEVICE_ADDR 0x03 |
| #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C |
| #define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B |
| #define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A |
| #define AT803X_MMD_ACCESS_CONTROL 0x0D |
| #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E |
| #define AT803X_FUNC_DATA 0x4003 |
| #define AT803X_INER 0x0012 |
| #define AT803X_INER_INIT 0xec00 |
| #define AT803X_INSR 0x0013 |
| #define AT803X_DEBUG_ADDR 0x1D |
| #define AT803X_DEBUG_DATA 0x1E |
| #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05 |
| #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8) |
| |
| MODULE_DESCRIPTION("Atheros 803x PHY driver"); |
| MODULE_AUTHOR("Matus Ujhelyi"); |
| MODULE_LICENSE("GPL"); |
| |
| static int at803x_set_wol(struct phy_device *phydev, |
| struct ethtool_wolinfo *wol) |
| { |
| struct net_device *ndev = phydev->attached_dev; |
| const u8 *mac; |
| int ret; |
| u32 value; |
| unsigned int i, offsets[] = { |
| AT803X_LOC_MAC_ADDR_32_47_OFFSET, |
| AT803X_LOC_MAC_ADDR_16_31_OFFSET, |
| AT803X_LOC_MAC_ADDR_0_15_OFFSET, |
| }; |
| |
| if (!ndev) |
| return -ENODEV; |
| |
| if (wol->wolopts & WAKE_MAGIC) { |
| mac = (const u8 *) ndev->dev_addr; |
| |
| if (!is_valid_ether_addr(mac)) |
| return -EFAULT; |
| |
| for (i = 0; i < 3; i++) { |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, |
| AT803X_DEVICE_ADDR); |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, |
| offsets[i]); |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, |
| AT803X_FUNC_DATA); |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, |
| mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); |
| } |
| |
| value = phy_read(phydev, AT803X_INTR_ENABLE); |
| value |= AT803X_WOL_ENABLE; |
| ret = phy_write(phydev, AT803X_INTR_ENABLE, value); |
| if (ret) |
| return ret; |
| value = phy_read(phydev, AT803X_INTR_STATUS); |
| } else { |
| value = phy_read(phydev, AT803X_INTR_ENABLE); |
| value &= (~AT803X_WOL_ENABLE); |
| ret = phy_write(phydev, AT803X_INTR_ENABLE, value); |
| if (ret) |
| return ret; |
| value = phy_read(phydev, AT803X_INTR_STATUS); |
| } |
| |
| return ret; |
| } |
| |
| static void at803x_get_wol(struct phy_device *phydev, |
| struct ethtool_wolinfo *wol) |
| { |
| u32 value; |
| |
| wol->supported = WAKE_MAGIC; |
| wol->wolopts = 0; |
| |
| value = phy_read(phydev, AT803X_INTR_ENABLE); |
| if (value & AT803X_WOL_ENABLE) |
| wol->wolopts |= WAKE_MAGIC; |
| } |
| |
| static int at803x_suspend(struct phy_device *phydev) |
| { |
| int value; |
| int wol_enabled; |
| |
| mutex_lock(&phydev->lock); |
| |
| value = phy_read(phydev, AT803X_INTR_ENABLE); |
| wol_enabled = value & AT803X_WOL_ENABLE; |
| |
| value = phy_read(phydev, MII_BMCR); |
| |
| if (wol_enabled) |
| value |= BMCR_ISOLATE; |
| else |
| value |= BMCR_PDOWN; |
| |
| phy_write(phydev, MII_BMCR, value); |
| |
| mutex_unlock(&phydev->lock); |
| |
| return 0; |
| } |
| |
| static int at803x_resume(struct phy_device *phydev) |
| { |
| int value; |
| |
| mutex_lock(&phydev->lock); |
| |
| value = phy_read(phydev, MII_BMCR); |
| value &= ~(BMCR_PDOWN | BMCR_ISOLATE); |
| phy_write(phydev, MII_BMCR, value); |
| |
| mutex_unlock(&phydev->lock); |
| |
| return 0; |
| } |
| |
| static int at803x_config_init(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = genphy_config_init(phydev); |
| if (ret < 0) |
| return ret; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| ret = phy_write(phydev, AT803X_DEBUG_ADDR, |
| AT803X_DEBUG_SYSTEM_MODE_CTRL); |
| if (ret) |
| return ret; |
| ret = phy_write(phydev, AT803X_DEBUG_DATA, |
| AT803X_DEBUG_RGMII_TX_CLK_DLY); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int at803x_ack_interrupt(struct phy_device *phydev) |
| { |
| int err; |
| |
| err = phy_read(phydev, AT803X_INSR); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static int at803x_config_intr(struct phy_device *phydev) |
| { |
| int err; |
| int value; |
| |
| value = phy_read(phydev, AT803X_INER); |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| err = phy_write(phydev, AT803X_INER, |
| value | AT803X_INER_INIT); |
| else |
| err = phy_write(phydev, AT803X_INER, 0); |
| |
| return err; |
| } |
| |
| static struct phy_driver at803x_driver[] = { |
| { |
| /* ATHEROS 8035 */ |
| .phy_id = 0x004dd072, |
| .name = "Atheros 8035 ethernet", |
| .phy_id_mask = 0xffffffef, |
| .config_init = at803x_config_init, |
| .set_wol = at803x_set_wol, |
| .get_wol = at803x_get_wol, |
| .suspend = at803x_suspend, |
| .resume = at803x_resume, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = genphy_config_aneg, |
| .read_status = genphy_read_status, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| }, { |
| /* ATHEROS 8030 */ |
| .phy_id = 0x004dd076, |
| .name = "Atheros 8030 ethernet", |
| .phy_id_mask = 0xffffffef, |
| .config_init = at803x_config_init, |
| .set_wol = at803x_set_wol, |
| .get_wol = at803x_get_wol, |
| .suspend = at803x_suspend, |
| .resume = at803x_resume, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = genphy_config_aneg, |
| .read_status = genphy_read_status, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| }, { |
| /* ATHEROS 8031 */ |
| .phy_id = 0x004dd074, |
| .name = "Atheros 8031 ethernet", |
| .phy_id_mask = 0xffffffef, |
| .config_init = at803x_config_init, |
| .set_wol = at803x_set_wol, |
| .get_wol = at803x_get_wol, |
| .suspend = at803x_suspend, |
| .resume = at803x_resume, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = genphy_config_aneg, |
| .read_status = genphy_read_status, |
| .ack_interrupt = &at803x_ack_interrupt, |
| .config_intr = &at803x_config_intr, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| } }; |
| |
| static int __init atheros_init(void) |
| { |
| return phy_drivers_register(at803x_driver, |
| ARRAY_SIZE(at803x_driver)); |
| } |
| |
| static void __exit atheros_exit(void) |
| { |
| phy_drivers_unregister(at803x_driver, ARRAY_SIZE(at803x_driver)); |
| } |
| |
| module_init(atheros_init); |
| module_exit(atheros_exit); |
| |
| static struct mdio_device_id __maybe_unused atheros_tbl[] = { |
| { 0x004dd076, 0xffffffef }, |
| { 0x004dd074, 0xffffffef }, |
| { 0x004dd072, 0xffffffef }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, atheros_tbl); |