| /* | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2007	Johannes Berg <johannes@sipsolutions.net> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * | 
 |  * Transmit and frame generation functions. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/bitmap.h> | 
 | #include <linux/rcupdate.h> | 
 | #include <net/net_namespace.h> | 
 | #include <net/ieee80211_radiotap.h> | 
 | #include <net/cfg80211.h> | 
 | #include <net/mac80211.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include "ieee80211_i.h" | 
 | #include "ieee80211_led.h" | 
 | #include "wep.h" | 
 | #include "wpa.h" | 
 | #include "wme.h" | 
 | #include "ieee80211_rate.h" | 
 |  | 
 | #define IEEE80211_TX_OK		0 | 
 | #define IEEE80211_TX_AGAIN	1 | 
 | #define IEEE80211_TX_FRAG_AGAIN	2 | 
 |  | 
 | /* misc utils */ | 
 |  | 
 | static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdata, | 
 | 					      struct ieee80211_hdr *hdr) | 
 | { | 
 | 	/* Set the sequence number for this frame. */ | 
 | 	hdr->seq_ctrl = cpu_to_le16(sdata->sequence); | 
 |  | 
 | 	/* Increase the sequence number. */ | 
 | 	sdata->sequence = (sdata->sequence + 0x10) & IEEE80211_SCTL_SEQ; | 
 | } | 
 |  | 
 | #ifdef CONFIG_MAC80211_LOWTX_FRAME_DUMP | 
 | static void ieee80211_dump_frame(const char *ifname, const char *title, | 
 | 				 const struct sk_buff *skb) | 
 | { | 
 | 	const struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	u16 fc; | 
 | 	int hdrlen; | 
 | 	DECLARE_MAC_BUF(mac); | 
 |  | 
 | 	printk(KERN_DEBUG "%s: %s (len=%d)", ifname, title, skb->len); | 
 | 	if (skb->len < 4) { | 
 | 		printk("\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	fc = le16_to_cpu(hdr->frame_control); | 
 | 	hdrlen = ieee80211_get_hdrlen(fc); | 
 | 	if (hdrlen > skb->len) | 
 | 		hdrlen = skb->len; | 
 | 	if (hdrlen >= 4) | 
 | 		printk(" FC=0x%04x DUR=0x%04x", | 
 | 		       fc, le16_to_cpu(hdr->duration_id)); | 
 | 	if (hdrlen >= 10) | 
 | 		printk(" A1=%s", print_mac(mac, hdr->addr1)); | 
 | 	if (hdrlen >= 16) | 
 | 		printk(" A2=%s", print_mac(mac, hdr->addr2)); | 
 | 	if (hdrlen >= 24) | 
 | 		printk(" A3=%s", print_mac(mac, hdr->addr3)); | 
 | 	if (hdrlen >= 30) | 
 | 		printk(" A4=%s", print_mac(mac, hdr->addr4)); | 
 | 	printk("\n"); | 
 | } | 
 | #else /* CONFIG_MAC80211_LOWTX_FRAME_DUMP */ | 
 | static inline void ieee80211_dump_frame(const char *ifname, const char *title, | 
 | 					struct sk_buff *skb) | 
 | { | 
 | } | 
 | #endif /* CONFIG_MAC80211_LOWTX_FRAME_DUMP */ | 
 |  | 
 | static u16 ieee80211_duration(struct ieee80211_txrx_data *tx, int group_addr, | 
 | 			      int next_frag_len) | 
 | { | 
 | 	int rate, mrate, erp, dur, i; | 
 | 	struct ieee80211_rate *txrate = tx->u.tx.rate; | 
 | 	struct ieee80211_local *local = tx->local; | 
 | 	struct ieee80211_hw_mode *mode = tx->u.tx.mode; | 
 |  | 
 | 	erp = txrate->flags & IEEE80211_RATE_ERP; | 
 |  | 
 | 	/* | 
 | 	 * data and mgmt (except PS Poll): | 
 | 	 * - during CFP: 32768 | 
 | 	 * - during contention period: | 
 | 	 *   if addr1 is group address: 0 | 
 | 	 *   if more fragments = 0 and addr1 is individual address: time to | 
 | 	 *      transmit one ACK plus SIFS | 
 | 	 *   if more fragments = 1 and addr1 is individual address: time to | 
 | 	 *      transmit next fragment plus 2 x ACK plus 3 x SIFS | 
 | 	 * | 
 | 	 * IEEE 802.11, 9.6: | 
 | 	 * - control response frame (CTS or ACK) shall be transmitted using the | 
 | 	 *   same rate as the immediately previous frame in the frame exchange | 
 | 	 *   sequence, if this rate belongs to the PHY mandatory rates, or else | 
 | 	 *   at the highest possible rate belonging to the PHY rates in the | 
 | 	 *   BSSBasicRateSet | 
 | 	 */ | 
 |  | 
 | 	if ((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) { | 
 | 		/* TODO: These control frames are not currently sent by | 
 | 		 * 80211.o, but should they be implemented, this function | 
 | 		 * needs to be updated to support duration field calculation. | 
 | 		 * | 
 | 		 * RTS: time needed to transmit pending data/mgmt frame plus | 
 | 		 *    one CTS frame plus one ACK frame plus 3 x SIFS | 
 | 		 * CTS: duration of immediately previous RTS minus time | 
 | 		 *    required to transmit CTS and its SIFS | 
 | 		 * ACK: 0 if immediately previous directed data/mgmt had | 
 | 		 *    more=0, with more=1 duration in ACK frame is duration | 
 | 		 *    from previous frame minus time needed to transmit ACK | 
 | 		 *    and its SIFS | 
 | 		 * PS Poll: BIT(15) | BIT(14) | aid | 
 | 		 */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* data/mgmt */ | 
 | 	if (0 /* FIX: data/mgmt during CFP */) | 
 | 		return 32768; | 
 |  | 
 | 	if (group_addr) /* Group address as the destination - no ACK */ | 
 | 		return 0; | 
 |  | 
 | 	/* Individual destination address: | 
 | 	 * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) | 
 | 	 * CTS and ACK frames shall be transmitted using the highest rate in | 
 | 	 * basic rate set that is less than or equal to the rate of the | 
 | 	 * immediately previous frame and that is using the same modulation | 
 | 	 * (CCK or OFDM). If no basic rate set matches with these requirements, | 
 | 	 * the highest mandatory rate of the PHY that is less than or equal to | 
 | 	 * the rate of the previous frame is used. | 
 | 	 * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps | 
 | 	 */ | 
 | 	rate = -1; | 
 | 	mrate = 10; /* use 1 Mbps if everything fails */ | 
 | 	for (i = 0; i < mode->num_rates; i++) { | 
 | 		struct ieee80211_rate *r = &mode->rates[i]; | 
 | 		if (r->rate > txrate->rate) | 
 | 			break; | 
 |  | 
 | 		if (IEEE80211_RATE_MODULATION(txrate->flags) != | 
 | 		    IEEE80211_RATE_MODULATION(r->flags)) | 
 | 			continue; | 
 |  | 
 | 		if (r->flags & IEEE80211_RATE_BASIC) | 
 | 			rate = r->rate; | 
 | 		else if (r->flags & IEEE80211_RATE_MANDATORY) | 
 | 			mrate = r->rate; | 
 | 	} | 
 | 	if (rate == -1) { | 
 | 		/* No matching basic rate found; use highest suitable mandatory | 
 | 		 * PHY rate */ | 
 | 		rate = mrate; | 
 | 	} | 
 |  | 
 | 	/* Time needed to transmit ACK | 
 | 	 * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up | 
 | 	 * to closest integer */ | 
 |  | 
 | 	dur = ieee80211_frame_duration(local, 10, rate, erp, | 
 | 		       tx->sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE); | 
 |  | 
 | 	if (next_frag_len) { | 
 | 		/* Frame is fragmented: duration increases with time needed to | 
 | 		 * transmit next fragment plus ACK and 2 x SIFS. */ | 
 | 		dur *= 2; /* ACK + SIFS */ | 
 | 		/* next fragment */ | 
 | 		dur += ieee80211_frame_duration(local, next_frag_len, | 
 | 				txrate->rate, erp, | 
 | 				tx->sdata->flags & | 
 | 					IEEE80211_SDATA_SHORT_PREAMBLE); | 
 | 	} | 
 |  | 
 | 	return dur; | 
 | } | 
 |  | 
 | static inline int __ieee80211_queue_stopped(const struct ieee80211_local *local, | 
 | 					    int queue) | 
 | { | 
 | 	return test_bit(IEEE80211_LINK_STATE_XOFF, &local->state[queue]); | 
 | } | 
 |  | 
 | static inline int __ieee80211_queue_pending(const struct ieee80211_local *local, | 
 | 					    int queue) | 
 | { | 
 | 	return test_bit(IEEE80211_LINK_STATE_PENDING, &local->state[queue]); | 
 | } | 
 |  | 
 | static int inline is_ieee80211_device(struct net_device *dev, | 
 | 				      struct net_device *master) | 
 | { | 
 | 	return (wdev_priv(dev->ieee80211_ptr) == | 
 | 		wdev_priv(master->ieee80211_ptr)); | 
 | } | 
 |  | 
 | /* tx handlers */ | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_check_assoc(struct ieee80211_txrx_data *tx) | 
 | { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 	struct sk_buff *skb = tx->skb; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | 
 | 	u32 sta_flags; | 
 |  | 
 | 	if (unlikely(tx->flags & IEEE80211_TXRXD_TX_INJECTED)) | 
 | 		return TXRX_CONTINUE; | 
 |  | 
 | 	if (unlikely(tx->local->sta_scanning != 0) && | 
 | 	    ((tx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT || | 
 | 	     (tx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PROBE_REQ)) | 
 | 		return TXRX_DROP; | 
 |  | 
 | 	if (tx->flags & IEEE80211_TXRXD_TXPS_BUFFERED) | 
 | 		return TXRX_CONTINUE; | 
 |  | 
 | 	sta_flags = tx->sta ? tx->sta->flags : 0; | 
 |  | 
 | 	if (likely(tx->flags & IEEE80211_TXRXD_TXUNICAST)) { | 
 | 		if (unlikely(!(sta_flags & WLAN_STA_ASSOC) && | 
 | 			     tx->sdata->type != IEEE80211_IF_TYPE_IBSS && | 
 | 			     (tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 			DECLARE_MAC_BUF(mac); | 
 | 			printk(KERN_DEBUG "%s: dropped data frame to not " | 
 | 			       "associated station %s\n", | 
 | 			       tx->dev->name, print_mac(mac, hdr->addr1)); | 
 | #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | 
 | 			I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); | 
 | 			return TXRX_DROP; | 
 | 		} | 
 | 	} else { | 
 | 		if (unlikely((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA && | 
 | 			     tx->local->num_sta == 0 && | 
 | 			     tx->sdata->type != IEEE80211_IF_TYPE_IBSS)) { | 
 | 			/* | 
 | 			 * No associated STAs - no need to send multicast | 
 | 			 * frames. | 
 | 			 */ | 
 | 			return TXRX_DROP; | 
 | 		} | 
 | 		return TXRX_CONTINUE; | 
 | 	} | 
 |  | 
 | 	if (unlikely(/* !injected && */ tx->sdata->ieee802_1x && | 
 | 		     !(sta_flags & WLAN_STA_AUTHORIZED))) { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 		DECLARE_MAC_BUF(mac); | 
 | 		printk(KERN_DEBUG "%s: dropped frame to %s" | 
 | 		       " (unauthorized port)\n", tx->dev->name, | 
 | 		       print_mac(mac, hdr->addr1)); | 
 | #endif | 
 | 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unauth_port); | 
 | 		return TXRX_DROP; | 
 | 	} | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_sequence(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
 |  | 
 | 	if (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)) >= 24) | 
 | 		ieee80211_include_sequence(tx->sdata, hdr); | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | /* This function is called whenever the AP is about to exceed the maximum limit | 
 |  * of buffered frames for power saving STAs. This situation should not really | 
 |  * happen often during normal operation, so dropping the oldest buffered packet | 
 |  * from each queue should be OK to make some room for new frames. */ | 
 | static void purge_old_ps_buffers(struct ieee80211_local *local) | 
 | { | 
 | 	int total = 0, purged = 0; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	/* | 
 | 	 * virtual interfaces are protected by RCU | 
 | 	 */ | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
 | 		struct ieee80211_if_ap *ap; | 
 | 		if (sdata->dev == local->mdev || | 
 | 		    sdata->type != IEEE80211_IF_TYPE_AP) | 
 | 			continue; | 
 | 		ap = &sdata->u.ap; | 
 | 		skb = skb_dequeue(&ap->ps_bc_buf); | 
 | 		if (skb) { | 
 | 			purged++; | 
 | 			dev_kfree_skb(skb); | 
 | 		} | 
 | 		total += skb_queue_len(&ap->ps_bc_buf); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	read_lock_bh(&local->sta_lock); | 
 | 	list_for_each_entry(sta, &local->sta_list, list) { | 
 | 		skb = skb_dequeue(&sta->ps_tx_buf); | 
 | 		if (skb) { | 
 | 			purged++; | 
 | 			dev_kfree_skb(skb); | 
 | 		} | 
 | 		total += skb_queue_len(&sta->ps_tx_buf); | 
 | 	} | 
 | 	read_unlock_bh(&local->sta_lock); | 
 |  | 
 | 	local->total_ps_buffered = total; | 
 | 	printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n", | 
 | 	       wiphy_name(local->hw.wiphy), purged); | 
 | } | 
 |  | 
 | static inline ieee80211_txrx_result | 
 | ieee80211_tx_h_multicast_ps_buf(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	/* broadcast/multicast frame */ | 
 | 	/* If any of the associated stations is in power save mode, | 
 | 	 * the frame is buffered to be sent after DTIM beacon frame */ | 
 | 	if ((tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) && | 
 | 	    tx->sdata->type != IEEE80211_IF_TYPE_WDS && | 
 | 	    tx->sdata->bss && atomic_read(&tx->sdata->bss->num_sta_ps) && | 
 | 	    !(tx->fc & IEEE80211_FCTL_ORDER)) { | 
 | 		if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | 
 | 			purge_old_ps_buffers(tx->local); | 
 | 		if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= | 
 | 		    AP_MAX_BC_BUFFER) { | 
 | 			if (net_ratelimit()) { | 
 | 				printk(KERN_DEBUG "%s: BC TX buffer full - " | 
 | 				       "dropping the oldest frame\n", | 
 | 				       tx->dev->name); | 
 | 			} | 
 | 			dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf)); | 
 | 		} else | 
 | 			tx->local->total_ps_buffered++; | 
 | 		skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb); | 
 | 		return TXRX_QUEUED; | 
 | 	} | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | static inline ieee80211_txrx_result | 
 | ieee80211_tx_h_unicast_ps_buf(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct sta_info *sta = tx->sta; | 
 | 	DECLARE_MAC_BUF(mac); | 
 |  | 
 | 	if (unlikely(!sta || | 
 | 		     ((tx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT && | 
 | 		      (tx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP))) | 
 | 		return TXRX_CONTINUE; | 
 |  | 
 | 	if (unlikely((sta->flags & WLAN_STA_PS) && !sta->pspoll)) { | 
 | 		struct ieee80211_tx_packet_data *pkt_data; | 
 | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
 | 		printk(KERN_DEBUG "STA %s aid %d: PS buffer (entries " | 
 | 		       "before %d)\n", | 
 | 		       print_mac(mac, sta->addr), sta->aid, | 
 | 		       skb_queue_len(&sta->ps_tx_buf)); | 
 | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
 | 		sta->flags |= WLAN_STA_TIM; | 
 | 		if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | 
 | 			purge_old_ps_buffers(tx->local); | 
 | 		if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) { | 
 | 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf); | 
 | 			if (net_ratelimit()) { | 
 | 				printk(KERN_DEBUG "%s: STA %s TX " | 
 | 				       "buffer full - dropping oldest frame\n", | 
 | 				       tx->dev->name, print_mac(mac, sta->addr)); | 
 | 			} | 
 | 			dev_kfree_skb(old); | 
 | 		} else | 
 | 			tx->local->total_ps_buffered++; | 
 | 		/* Queue frame to be sent after STA sends an PS Poll frame */ | 
 | 		if (skb_queue_empty(&sta->ps_tx_buf)) { | 
 | 			if (tx->local->ops->set_tim) | 
 | 				tx->local->ops->set_tim(local_to_hw(tx->local), | 
 | 						       sta->aid, 1); | 
 | 			if (tx->sdata->bss) | 
 | 				bss_tim_set(tx->local, tx->sdata->bss, sta->aid); | 
 | 		} | 
 | 		pkt_data = (struct ieee80211_tx_packet_data *)tx->skb->cb; | 
 | 		pkt_data->jiffies = jiffies; | 
 | 		skb_queue_tail(&sta->ps_tx_buf, tx->skb); | 
 | 		return TXRX_QUEUED; | 
 | 	} | 
 | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
 | 	else if (unlikely(sta->flags & WLAN_STA_PS)) { | 
 | 		printk(KERN_DEBUG "%s: STA %s in PS mode, but pspoll " | 
 | 		       "set -> send frame\n", tx->dev->name, | 
 | 		       print_mac(mac, sta->addr)); | 
 | 	} | 
 | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
 | 	sta->pspoll = 0; | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_ps_buf(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	if (unlikely(tx->flags & IEEE80211_TXRXD_TXPS_BUFFERED)) | 
 | 		return TXRX_CONTINUE; | 
 |  | 
 | 	if (tx->flags & IEEE80211_TXRXD_TXUNICAST) | 
 | 		return ieee80211_tx_h_unicast_ps_buf(tx); | 
 | 	else | 
 | 		return ieee80211_tx_h_multicast_ps_buf(tx); | 
 | } | 
 |  | 
 |  | 
 |  | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_select_key(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct ieee80211_key *key; | 
 |  | 
 | 	if (unlikely(tx->u.tx.control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) | 
 | 		tx->key = NULL; | 
 | 	else if (tx->sta && (key = rcu_dereference(tx->sta->key))) | 
 | 		tx->key = key; | 
 | 	else if ((key = rcu_dereference(tx->sdata->default_key))) | 
 | 		tx->key = key; | 
 | 	else if (tx->sdata->drop_unencrypted && | 
 | 		 !(tx->sdata->eapol && ieee80211_is_eapol(tx->skb))) { | 
 | 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); | 
 | 		return TXRX_DROP; | 
 | 	} else { | 
 | 		tx->key = NULL; | 
 | 		tx->u.tx.control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | 
 | 	} | 
 |  | 
 | 	if (tx->key) { | 
 | 		tx->key->tx_rx_count++; | 
 | 		/* TODO: add threshold stuff again */ | 
 | 	} | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_fragment(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; | 
 | 	size_t hdrlen, per_fragm, num_fragm, payload_len, left; | 
 | 	struct sk_buff **frags, *first, *frag; | 
 | 	int i; | 
 | 	u16 seq; | 
 | 	u8 *pos; | 
 | 	int frag_threshold = tx->local->fragmentation_threshold; | 
 |  | 
 | 	if (!(tx->flags & IEEE80211_TXRXD_FRAGMENTED)) | 
 | 		return TXRX_CONTINUE; | 
 |  | 
 | 	first = tx->skb; | 
 |  | 
 | 	hdrlen = ieee80211_get_hdrlen(tx->fc); | 
 | 	payload_len = first->len - hdrlen; | 
 | 	per_fragm = frag_threshold - hdrlen - FCS_LEN; | 
 | 	num_fragm = DIV_ROUND_UP(payload_len, per_fragm); | 
 |  | 
 | 	frags = kzalloc(num_fragm * sizeof(struct sk_buff *), GFP_ATOMIC); | 
 | 	if (!frags) | 
 | 		goto fail; | 
 |  | 
 | 	hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); | 
 | 	seq = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ; | 
 | 	pos = first->data + hdrlen + per_fragm; | 
 | 	left = payload_len - per_fragm; | 
 | 	for (i = 0; i < num_fragm - 1; i++) { | 
 | 		struct ieee80211_hdr *fhdr; | 
 | 		size_t copylen; | 
 |  | 
 | 		if (left <= 0) | 
 | 			goto fail; | 
 |  | 
 | 		/* reserve enough extra head and tail room for possible | 
 | 		 * encryption */ | 
 | 		frag = frags[i] = | 
 | 			dev_alloc_skb(tx->local->tx_headroom + | 
 | 				      frag_threshold + | 
 | 				      IEEE80211_ENCRYPT_HEADROOM + | 
 | 				      IEEE80211_ENCRYPT_TAILROOM); | 
 | 		if (!frag) | 
 | 			goto fail; | 
 | 		/* Make sure that all fragments use the same priority so | 
 | 		 * that they end up using the same TX queue */ | 
 | 		frag->priority = first->priority; | 
 | 		skb_reserve(frag, tx->local->tx_headroom + | 
 | 				  IEEE80211_ENCRYPT_HEADROOM); | 
 | 		fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); | 
 | 		memcpy(fhdr, first->data, hdrlen); | 
 | 		if (i == num_fragm - 2) | 
 | 			fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); | 
 | 		fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); | 
 | 		copylen = left > per_fragm ? per_fragm : left; | 
 | 		memcpy(skb_put(frag, copylen), pos, copylen); | 
 |  | 
 | 		pos += copylen; | 
 | 		left -= copylen; | 
 | 	} | 
 | 	skb_trim(first, hdrlen + per_fragm); | 
 |  | 
 | 	tx->u.tx.num_extra_frag = num_fragm - 1; | 
 | 	tx->u.tx.extra_frag = frags; | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 |  | 
 |  fail: | 
 | 	printk(KERN_DEBUG "%s: failed to fragment frame\n", tx->dev->name); | 
 | 	if (frags) { | 
 | 		for (i = 0; i < num_fragm - 1; i++) | 
 | 			if (frags[i]) | 
 | 				dev_kfree_skb(frags[i]); | 
 | 		kfree(frags); | 
 | 	} | 
 | 	I802_DEBUG_INC(tx->local->tx_handlers_drop_fragment); | 
 | 	return TXRX_DROP; | 
 | } | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_encrypt(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	if (!tx->key) | 
 | 		return TXRX_CONTINUE; | 
 |  | 
 | 	switch (tx->key->conf.alg) { | 
 | 	case ALG_WEP: | 
 | 		return ieee80211_crypto_wep_encrypt(tx); | 
 | 	case ALG_TKIP: | 
 | 		return ieee80211_crypto_tkip_encrypt(tx); | 
 | 	case ALG_CCMP: | 
 | 		return ieee80211_crypto_ccmp_encrypt(tx); | 
 | 	} | 
 |  | 
 | 	/* not reached */ | 
 | 	WARN_ON(1); | 
 | 	return TXRX_DROP; | 
 | } | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_rate_ctrl(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct rate_control_extra extra; | 
 |  | 
 | 	if (likely(!tx->u.tx.rate)) { | 
 | 		memset(&extra, 0, sizeof(extra)); | 
 | 		extra.mode = tx->u.tx.mode; | 
 | 		extra.ethertype = tx->ethertype; | 
 |  | 
 | 		tx->u.tx.rate = rate_control_get_rate(tx->local, tx->dev, | 
 | 						      tx->skb, &extra); | 
 | 		if (unlikely(extra.probe != NULL)) { | 
 | 			tx->u.tx.control->flags |= | 
 | 				IEEE80211_TXCTL_RATE_CTRL_PROBE; | 
 | 			tx->flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | 
 | 			tx->u.tx.control->alt_retry_rate = tx->u.tx.rate->val; | 
 | 			tx->u.tx.rate = extra.probe; | 
 | 		} else | 
 | 			tx->u.tx.control->alt_retry_rate = -1; | 
 |  | 
 | 		if (!tx->u.tx.rate) | 
 | 			return TXRX_DROP; | 
 | 	} else | 
 | 		tx->u.tx.control->alt_retry_rate = -1; | 
 |  | 
 | 	if (tx->u.tx.mode->mode == MODE_IEEE80211G && | 
 | 	    (tx->sdata->flags & IEEE80211_SDATA_USE_PROTECTION) && | 
 | 	    (tx->flags & IEEE80211_TXRXD_FRAGMENTED) && extra.nonerp) { | 
 | 		tx->u.tx.last_frag_rate = tx->u.tx.rate; | 
 | 		if (extra.probe) | 
 | 			tx->flags &= ~IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | 
 | 		else | 
 | 			tx->flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | 
 | 		tx->u.tx.rate = extra.nonerp; | 
 | 		tx->u.tx.control->rate = extra.nonerp; | 
 | 		tx->u.tx.control->flags &= ~IEEE80211_TXCTL_RATE_CTRL_PROBE; | 
 | 	} else { | 
 | 		tx->u.tx.last_frag_rate = tx->u.tx.rate; | 
 | 		tx->u.tx.control->rate = tx->u.tx.rate; | 
 | 	} | 
 | 	tx->u.tx.control->tx_rate = tx->u.tx.rate->val; | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_misc(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; | 
 | 	u16 fc = le16_to_cpu(hdr->frame_control); | 
 | 	u16 dur; | 
 | 	struct ieee80211_tx_control *control = tx->u.tx.control; | 
 | 	struct ieee80211_hw_mode *mode = tx->u.tx.mode; | 
 |  | 
 | 	if (!control->retry_limit) { | 
 | 		if (!is_multicast_ether_addr(hdr->addr1)) { | 
 | 			if (tx->skb->len + FCS_LEN > tx->local->rts_threshold | 
 | 			    && tx->local->rts_threshold < | 
 | 					IEEE80211_MAX_RTS_THRESHOLD) { | 
 | 				control->flags |= | 
 | 					IEEE80211_TXCTL_USE_RTS_CTS; | 
 | 				control->flags |= | 
 | 					IEEE80211_TXCTL_LONG_RETRY_LIMIT; | 
 | 				control->retry_limit = | 
 | 					tx->local->long_retry_limit; | 
 | 			} else { | 
 | 				control->retry_limit = | 
 | 					tx->local->short_retry_limit; | 
 | 			} | 
 | 		} else { | 
 | 			control->retry_limit = 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (tx->flags & IEEE80211_TXRXD_FRAGMENTED) { | 
 | 		/* Do not use multiple retry rates when sending fragmented | 
 | 		 * frames. | 
 | 		 * TODO: The last fragment could still use multiple retry | 
 | 		 * rates. */ | 
 | 		control->alt_retry_rate = -1; | 
 | 	} | 
 |  | 
 | 	/* Use CTS protection for unicast frames sent using extended rates if | 
 | 	 * there are associated non-ERP stations and RTS/CTS is not configured | 
 | 	 * for the frame. */ | 
 | 	if (mode->mode == MODE_IEEE80211G && | 
 | 	    (tx->u.tx.rate->flags & IEEE80211_RATE_ERP) && | 
 | 	    (tx->flags & IEEE80211_TXRXD_TXUNICAST) && | 
 | 	    (tx->sdata->flags & IEEE80211_SDATA_USE_PROTECTION) && | 
 | 	    !(control->flags & IEEE80211_TXCTL_USE_RTS_CTS)) | 
 | 		control->flags |= IEEE80211_TXCTL_USE_CTS_PROTECT; | 
 |  | 
 | 	/* Transmit data frames using short preambles if the driver supports | 
 | 	 * short preambles at the selected rate and short preambles are | 
 | 	 * available on the network at the current point in time. */ | 
 | 	if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && | 
 | 	    (tx->u.tx.rate->flags & IEEE80211_RATE_PREAMBLE2) && | 
 | 	    (tx->sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE) && | 
 | 	    (!tx->sta || (tx->sta->flags & WLAN_STA_SHORT_PREAMBLE))) { | 
 | 		tx->u.tx.control->tx_rate = tx->u.tx.rate->val2; | 
 | 	} | 
 |  | 
 | 	/* Setup duration field for the first fragment of the frame. Duration | 
 | 	 * for remaining fragments will be updated when they are being sent | 
 | 	 * to low-level driver in ieee80211_tx(). */ | 
 | 	dur = ieee80211_duration(tx, is_multicast_ether_addr(hdr->addr1), | 
 | 				 (tx->flags & IEEE80211_TXRXD_FRAGMENTED) ? | 
 | 				 tx->u.tx.extra_frag[0]->len : 0); | 
 | 	hdr->duration_id = cpu_to_le16(dur); | 
 |  | 
 | 	if ((control->flags & IEEE80211_TXCTL_USE_RTS_CTS) || | 
 | 	    (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)) { | 
 | 		struct ieee80211_rate *rate; | 
 |  | 
 | 		/* Do not use multiple retry rates when using RTS/CTS */ | 
 | 		control->alt_retry_rate = -1; | 
 |  | 
 | 		/* Use min(data rate, max base rate) as CTS/RTS rate */ | 
 | 		rate = tx->u.tx.rate; | 
 | 		while (rate > mode->rates && | 
 | 		       !(rate->flags & IEEE80211_RATE_BASIC)) | 
 | 			rate--; | 
 |  | 
 | 		control->rts_cts_rate = rate->val; | 
 | 		control->rts_rate = rate; | 
 | 	} | 
 |  | 
 | 	if (tx->sta) { | 
 | 		tx->sta->tx_packets++; | 
 | 		tx->sta->tx_fragments++; | 
 | 		tx->sta->tx_bytes += tx->skb->len; | 
 | 		if (tx->u.tx.extra_frag) { | 
 | 			int i; | 
 | 			tx->sta->tx_fragments += tx->u.tx.num_extra_frag; | 
 | 			for (i = 0; i < tx->u.tx.num_extra_frag; i++) { | 
 | 				tx->sta->tx_bytes += | 
 | 					tx->u.tx.extra_frag[i]->len; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Tell hardware to not encrypt when we had sw crypto. | 
 | 	 * Because we use the same flag to internally indicate that | 
 | 	 * no (software) encryption should be done, we have to set it | 
 | 	 * after all crypto handlers. | 
 | 	 */ | 
 | 	if (tx->key && !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) | 
 | 		tx->u.tx.control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_txrx_result | 
 | ieee80211_tx_h_load_stats(struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct ieee80211_local *local = tx->local; | 
 | 	struct ieee80211_hw_mode *mode = tx->u.tx.mode; | 
 | 	struct sk_buff *skb = tx->skb; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	u32 load = 0, hdrtime; | 
 |  | 
 | 	/* TODO: this could be part of tx_status handling, so that the number | 
 | 	 * of retries would be known; TX rate should in that case be stored | 
 | 	 * somewhere with the packet */ | 
 |  | 
 | 	/* Estimate total channel use caused by this frame */ | 
 |  | 
 | 	/* 1 bit at 1 Mbit/s takes 1 usec; in channel_use values, | 
 | 	 * 1 usec = 1/8 * (1080 / 10) = 13.5 */ | 
 |  | 
 | 	if (mode->mode == MODE_IEEE80211A || | 
 | 	    (mode->mode == MODE_IEEE80211G && | 
 | 	     tx->u.tx.rate->flags & IEEE80211_RATE_ERP)) | 
 | 		hdrtime = CHAN_UTIL_HDR_SHORT; | 
 | 	else | 
 | 		hdrtime = CHAN_UTIL_HDR_LONG; | 
 |  | 
 | 	load = hdrtime; | 
 | 	if (!is_multicast_ether_addr(hdr->addr1)) | 
 | 		load += hdrtime; | 
 |  | 
 | 	if (tx->u.tx.control->flags & IEEE80211_TXCTL_USE_RTS_CTS) | 
 | 		load += 2 * hdrtime; | 
 | 	else if (tx->u.tx.control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) | 
 | 		load += hdrtime; | 
 |  | 
 | 	load += skb->len * tx->u.tx.rate->rate_inv; | 
 |  | 
 | 	if (tx->u.tx.extra_frag) { | 
 | 		int i; | 
 | 		for (i = 0; i < tx->u.tx.num_extra_frag; i++) { | 
 | 			load += 2 * hdrtime; | 
 | 			load += tx->u.tx.extra_frag[i]->len * | 
 | 				tx->u.tx.rate->rate; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Divide channel_use by 8 to avoid wrapping around the counter */ | 
 | 	load >>= CHAN_UTIL_SHIFT; | 
 | 	local->channel_use_raw += load; | 
 | 	if (tx->sta) | 
 | 		tx->sta->channel_use_raw += load; | 
 | 	tx->sdata->channel_use_raw += load; | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | /* TODO: implement register/unregister functions for adding TX/RX handlers | 
 |  * into ordered list */ | 
 |  | 
 | ieee80211_tx_handler ieee80211_tx_handlers[] = | 
 | { | 
 | 	ieee80211_tx_h_check_assoc, | 
 | 	ieee80211_tx_h_sequence, | 
 | 	ieee80211_tx_h_ps_buf, | 
 | 	ieee80211_tx_h_select_key, | 
 | 	ieee80211_tx_h_michael_mic_add, | 
 | 	ieee80211_tx_h_fragment, | 
 | 	ieee80211_tx_h_encrypt, | 
 | 	ieee80211_tx_h_rate_ctrl, | 
 | 	ieee80211_tx_h_misc, | 
 | 	ieee80211_tx_h_load_stats, | 
 | 	NULL | 
 | }; | 
 |  | 
 | /* actual transmit path */ | 
 |  | 
 | /* | 
 |  * deal with packet injection down monitor interface | 
 |  * with Radiotap Header -- only called for monitor mode interface | 
 |  */ | 
 | static ieee80211_txrx_result | 
 | __ieee80211_parse_tx_radiotap(struct ieee80211_txrx_data *tx, | 
 | 			      struct sk_buff *skb) | 
 | { | 
 | 	/* | 
 | 	 * this is the moment to interpret and discard the radiotap header that | 
 | 	 * must be at the start of the packet injected in Monitor mode | 
 | 	 * | 
 | 	 * Need to take some care with endian-ness since radiotap | 
 | 	 * args are little-endian | 
 | 	 */ | 
 |  | 
 | 	struct ieee80211_radiotap_iterator iterator; | 
 | 	struct ieee80211_radiotap_header *rthdr = | 
 | 		(struct ieee80211_radiotap_header *) skb->data; | 
 | 	struct ieee80211_hw_mode *mode = tx->local->hw.conf.mode; | 
 | 	int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); | 
 | 	struct ieee80211_tx_control *control = tx->u.tx.control; | 
 |  | 
 | 	control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | 
 | 	tx->flags |= IEEE80211_TXRXD_TX_INJECTED; | 
 | 	tx->flags &= ~IEEE80211_TXRXD_FRAGMENTED; | 
 |  | 
 | 	/* | 
 | 	 * for every radiotap entry that is present | 
 | 	 * (ieee80211_radiotap_iterator_next returns -ENOENT when no more | 
 | 	 * entries present, or -EINVAL on error) | 
 | 	 */ | 
 |  | 
 | 	while (!ret) { | 
 | 		int i, target_rate; | 
 |  | 
 | 		ret = ieee80211_radiotap_iterator_next(&iterator); | 
 |  | 
 | 		if (ret) | 
 | 			continue; | 
 |  | 
 | 		/* see if this argument is something we can use */ | 
 | 		switch (iterator.this_arg_index) { | 
 | 		/* | 
 | 		 * You must take care when dereferencing iterator.this_arg | 
 | 		 * for multibyte types... the pointer is not aligned.  Use | 
 | 		 * get_unaligned((type *)iterator.this_arg) to dereference | 
 | 		 * iterator.this_arg for type "type" safely on all arches. | 
 | 		*/ | 
 | 		case IEEE80211_RADIOTAP_RATE: | 
 | 			/* | 
 | 			 * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps | 
 | 			 * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps | 
 | 			 */ | 
 | 			target_rate = (*iterator.this_arg) * 5; | 
 | 			for (i = 0; i < mode->num_rates; i++) { | 
 | 				struct ieee80211_rate *r = &mode->rates[i]; | 
 |  | 
 | 				if (r->rate == target_rate) { | 
 | 					tx->u.tx.rate = r; | 
 | 					break; | 
 | 				} | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case IEEE80211_RADIOTAP_ANTENNA: | 
 | 			/* | 
 | 			 * radiotap uses 0 for 1st ant, mac80211 is 1 for | 
 | 			 * 1st ant | 
 | 			 */ | 
 | 			control->antenna_sel_tx = (*iterator.this_arg) + 1; | 
 | 			break; | 
 |  | 
 | 		case IEEE80211_RADIOTAP_DBM_TX_POWER: | 
 | 			control->power_level = *iterator.this_arg; | 
 | 			break; | 
 |  | 
 | 		case IEEE80211_RADIOTAP_FLAGS: | 
 | 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { | 
 | 				/* | 
 | 				 * this indicates that the skb we have been | 
 | 				 * handed has the 32-bit FCS CRC at the end... | 
 | 				 * we should react to that by snipping it off | 
 | 				 * because it will be recomputed and added | 
 | 				 * on transmission | 
 | 				 */ | 
 | 				if (skb->len < (iterator.max_length + FCS_LEN)) | 
 | 					return TXRX_DROP; | 
 |  | 
 | 				skb_trim(skb, skb->len - FCS_LEN); | 
 | 			} | 
 | 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) | 
 | 				control->flags &= | 
 | 					~IEEE80211_TXCTL_DO_NOT_ENCRYPT; | 
 | 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) | 
 | 				tx->flags |= IEEE80211_TXRXD_FRAGMENTED; | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * Please update the file | 
 | 		 * Documentation/networking/mac80211-injection.txt | 
 | 		 * when parsing new fields here. | 
 | 		 */ | 
 |  | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ | 
 | 		return TXRX_DROP; | 
 |  | 
 | 	/* | 
 | 	 * remove the radiotap header | 
 | 	 * iterator->max_length was sanity-checked against | 
 | 	 * skb->len by iterator init | 
 | 	 */ | 
 | 	skb_pull(skb, iterator.max_length); | 
 |  | 
 | 	return TXRX_CONTINUE; | 
 | } | 
 |  | 
 | /* | 
 |  * initialises @tx | 
 |  */ | 
 | static ieee80211_txrx_result | 
 | __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, | 
 | 		       struct sk_buff *skb, | 
 | 		       struct net_device *dev, | 
 | 		       struct ieee80211_tx_control *control) | 
 | { | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	ieee80211_txrx_result res = TXRX_CONTINUE; | 
 |  | 
 | 	int hdrlen; | 
 |  | 
 | 	memset(tx, 0, sizeof(*tx)); | 
 | 	tx->skb = skb; | 
 | 	tx->dev = dev; /* use original interface */ | 
 | 	tx->local = local; | 
 | 	tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	tx->u.tx.control = control; | 
 | 	/* | 
 | 	 * Set this flag (used below to indicate "automatic fragmentation"), | 
 | 	 * it will be cleared/left by radiotap as desired. | 
 | 	 */ | 
 | 	tx->flags |= IEEE80211_TXRXD_FRAGMENTED; | 
 |  | 
 | 	/* process and remove the injection radiotap header */ | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) { | 
 | 		if (__ieee80211_parse_tx_radiotap(tx, skb) == TXRX_DROP) | 
 | 			return TXRX_DROP; | 
 |  | 
 | 		/* | 
 | 		 * __ieee80211_parse_tx_radiotap has now removed | 
 | 		 * the radiotap header that was present and pre-filled | 
 | 		 * 'tx' with tx control information. | 
 | 		 */ | 
 | 	} | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *) skb->data; | 
 |  | 
 | 	tx->sta = sta_info_get(local, hdr->addr1); | 
 | 	tx->fc = le16_to_cpu(hdr->frame_control); | 
 |  | 
 | 	if (is_multicast_ether_addr(hdr->addr1)) { | 
 | 		tx->flags &= ~IEEE80211_TXRXD_TXUNICAST; | 
 | 		control->flags |= IEEE80211_TXCTL_NO_ACK; | 
 | 	} else { | 
 | 		tx->flags |= IEEE80211_TXRXD_TXUNICAST; | 
 | 		control->flags &= ~IEEE80211_TXCTL_NO_ACK; | 
 | 	} | 
 |  | 
 | 	if (tx->flags & IEEE80211_TXRXD_FRAGMENTED) { | 
 | 		if ((tx->flags & IEEE80211_TXRXD_TXUNICAST) && | 
 | 		    skb->len + FCS_LEN > local->fragmentation_threshold && | 
 | 		    !local->ops->set_frag_threshold) | 
 | 			tx->flags |= IEEE80211_TXRXD_FRAGMENTED; | 
 | 		else | 
 | 			tx->flags &= ~IEEE80211_TXRXD_FRAGMENTED; | 
 | 	} | 
 |  | 
 | 	if (!tx->sta) | 
 | 		control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; | 
 | 	else if (tx->sta->clear_dst_mask) { | 
 | 		control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; | 
 | 		tx->sta->clear_dst_mask = 0; | 
 | 	} | 
 |  | 
 | 	hdrlen = ieee80211_get_hdrlen(tx->fc); | 
 | 	if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) { | 
 | 		u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)]; | 
 | 		tx->ethertype = (pos[0] << 8) | pos[1]; | 
 | 	} | 
 | 	control->flags |= IEEE80211_TXCTL_FIRST_FRAGMENT; | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | /* Device in tx->dev has a reference added; use dev_put(tx->dev) when | 
 |  * finished with it. | 
 |  * | 
 |  * NB: @tx is uninitialised when passed in here | 
 |  */ | 
 | static int ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, | 
 | 				struct sk_buff *skb, | 
 | 				struct net_device *mdev, | 
 | 				struct ieee80211_tx_control *control) | 
 | { | 
 | 	struct ieee80211_tx_packet_data *pkt_data; | 
 | 	struct net_device *dev; | 
 |  | 
 | 	pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | 
 | 	dev = dev_get_by_index(&init_net, pkt_data->ifindex); | 
 | 	if (unlikely(dev && !is_ieee80211_device(dev, mdev))) { | 
 | 		dev_put(dev); | 
 | 		dev = NULL; | 
 | 	} | 
 | 	if (unlikely(!dev)) | 
 | 		return -ENODEV; | 
 | 	/* initialises tx with control */ | 
 | 	__ieee80211_tx_prepare(tx, skb, dev, control); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, | 
 | 			  struct ieee80211_txrx_data *tx) | 
 | { | 
 | 	struct ieee80211_tx_control *control = tx->u.tx.control; | 
 | 	int ret, i; | 
 |  | 
 | 	if (!ieee80211_qdisc_installed(local->mdev) && | 
 | 	    __ieee80211_queue_stopped(local, 0)) { | 
 | 		netif_stop_queue(local->mdev); | 
 | 		return IEEE80211_TX_AGAIN; | 
 | 	} | 
 | 	if (skb) { | 
 | 		ieee80211_dump_frame(wiphy_name(local->hw.wiphy), | 
 | 				     "TX to low-level driver", skb); | 
 | 		ret = local->ops->tx(local_to_hw(local), skb, control); | 
 | 		if (ret) | 
 | 			return IEEE80211_TX_AGAIN; | 
 | 		local->mdev->trans_start = jiffies; | 
 | 		ieee80211_led_tx(local, 1); | 
 | 	} | 
 | 	if (tx->u.tx.extra_frag) { | 
 | 		control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS | | 
 | 				    IEEE80211_TXCTL_USE_CTS_PROTECT | | 
 | 				    IEEE80211_TXCTL_CLEAR_DST_MASK | | 
 | 				    IEEE80211_TXCTL_FIRST_FRAGMENT); | 
 | 		for (i = 0; i < tx->u.tx.num_extra_frag; i++) { | 
 | 			if (!tx->u.tx.extra_frag[i]) | 
 | 				continue; | 
 | 			if (__ieee80211_queue_stopped(local, control->queue)) | 
 | 				return IEEE80211_TX_FRAG_AGAIN; | 
 | 			if (i == tx->u.tx.num_extra_frag) { | 
 | 				control->tx_rate = tx->u.tx.last_frag_hwrate; | 
 | 				control->rate = tx->u.tx.last_frag_rate; | 
 | 				if (tx->flags & IEEE80211_TXRXD_TXPROBE_LAST_FRAG) | 
 | 					control->flags |= | 
 | 						IEEE80211_TXCTL_RATE_CTRL_PROBE; | 
 | 				else | 
 | 					control->flags &= | 
 | 						~IEEE80211_TXCTL_RATE_CTRL_PROBE; | 
 | 			} | 
 |  | 
 | 			ieee80211_dump_frame(wiphy_name(local->hw.wiphy), | 
 | 					     "TX to low-level driver", | 
 | 					     tx->u.tx.extra_frag[i]); | 
 | 			ret = local->ops->tx(local_to_hw(local), | 
 | 					    tx->u.tx.extra_frag[i], | 
 | 					    control); | 
 | 			if (ret) | 
 | 				return IEEE80211_TX_FRAG_AGAIN; | 
 | 			local->mdev->trans_start = jiffies; | 
 | 			ieee80211_led_tx(local, 1); | 
 | 			tx->u.tx.extra_frag[i] = NULL; | 
 | 		} | 
 | 		kfree(tx->u.tx.extra_frag); | 
 | 		tx->u.tx.extra_frag = NULL; | 
 | 	} | 
 | 	return IEEE80211_TX_OK; | 
 | } | 
 |  | 
 | static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, | 
 | 			struct ieee80211_tx_control *control) | 
 | { | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 | 	struct sta_info *sta; | 
 | 	ieee80211_tx_handler *handler; | 
 | 	struct ieee80211_txrx_data tx; | 
 | 	ieee80211_txrx_result res = TXRX_DROP, res_prepare; | 
 | 	int ret, i; | 
 |  | 
 | 	WARN_ON(__ieee80211_queue_pending(local, control->queue)); | 
 |  | 
 | 	if (unlikely(skb->len < 10)) { | 
 | 		dev_kfree_skb(skb); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* initialises tx */ | 
 | 	res_prepare = __ieee80211_tx_prepare(&tx, skb, dev, control); | 
 |  | 
 | 	if (res_prepare == TXRX_DROP) { | 
 | 		dev_kfree_skb(skb); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * key references are protected using RCU and this requires that | 
 | 	 * we are in a read-site RCU section during receive processing | 
 | 	 */ | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	sta = tx.sta; | 
 | 	tx.u.tx.mode = local->hw.conf.mode; | 
 |  | 
 | 	for (handler = local->tx_handlers; *handler != NULL; | 
 | 	     handler++) { | 
 | 		res = (*handler)(&tx); | 
 | 		if (res != TXRX_CONTINUE) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	skb = tx.skb; /* handlers are allowed to change skb */ | 
 |  | 
 | 	if (sta) | 
 | 		sta_info_put(sta); | 
 |  | 
 | 	if (unlikely(res == TXRX_DROP)) { | 
 | 		I802_DEBUG_INC(local->tx_handlers_drop); | 
 | 		goto drop; | 
 | 	} | 
 |  | 
 | 	if (unlikely(res == TXRX_QUEUED)) { | 
 | 		I802_DEBUG_INC(local->tx_handlers_queued); | 
 | 		rcu_read_unlock(); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (tx.u.tx.extra_frag) { | 
 | 		for (i = 0; i < tx.u.tx.num_extra_frag; i++) { | 
 | 			int next_len, dur; | 
 | 			struct ieee80211_hdr *hdr = | 
 | 				(struct ieee80211_hdr *) | 
 | 				tx.u.tx.extra_frag[i]->data; | 
 |  | 
 | 			if (i + 1 < tx.u.tx.num_extra_frag) { | 
 | 				next_len = tx.u.tx.extra_frag[i + 1]->len; | 
 | 			} else { | 
 | 				next_len = 0; | 
 | 				tx.u.tx.rate = tx.u.tx.last_frag_rate; | 
 | 				tx.u.tx.last_frag_hwrate = tx.u.tx.rate->val; | 
 | 			} | 
 | 			dur = ieee80211_duration(&tx, 0, next_len); | 
 | 			hdr->duration_id = cpu_to_le16(dur); | 
 | 		} | 
 | 	} | 
 |  | 
 | retry: | 
 | 	ret = __ieee80211_tx(local, skb, &tx); | 
 | 	if (ret) { | 
 | 		struct ieee80211_tx_stored_packet *store = | 
 | 			&local->pending_packet[control->queue]; | 
 |  | 
 | 		if (ret == IEEE80211_TX_FRAG_AGAIN) | 
 | 			skb = NULL; | 
 | 		set_bit(IEEE80211_LINK_STATE_PENDING, | 
 | 			&local->state[control->queue]); | 
 | 		smp_mb(); | 
 | 		/* When the driver gets out of buffers during sending of | 
 | 		 * fragments and calls ieee80211_stop_queue, there is | 
 | 		 * a small window between IEEE80211_LINK_STATE_XOFF and | 
 | 		 * IEEE80211_LINK_STATE_PENDING flags are set. If a buffer | 
 | 		 * gets available in that window (i.e. driver calls | 
 | 		 * ieee80211_wake_queue), we would end up with ieee80211_tx | 
 | 		 * called with IEEE80211_LINK_STATE_PENDING. Prevent this by | 
 | 		 * continuing transmitting here when that situation is | 
 | 		 * possible to have happened. */ | 
 | 		if (!__ieee80211_queue_stopped(local, control->queue)) { | 
 | 			clear_bit(IEEE80211_LINK_STATE_PENDING, | 
 | 				  &local->state[control->queue]); | 
 | 			goto retry; | 
 | 		} | 
 | 		memcpy(&store->control, control, | 
 | 		       sizeof(struct ieee80211_tx_control)); | 
 | 		store->skb = skb; | 
 | 		store->extra_frag = tx.u.tx.extra_frag; | 
 | 		store->num_extra_frag = tx.u.tx.num_extra_frag; | 
 | 		store->last_frag_hwrate = tx.u.tx.last_frag_hwrate; | 
 | 		store->last_frag_rate = tx.u.tx.last_frag_rate; | 
 | 		store->last_frag_rate_ctrl_probe = | 
 | 			!!(tx.flags & IEEE80211_TXRXD_TXPROBE_LAST_FRAG); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 |  | 
 |  drop: | 
 | 	if (skb) | 
 | 		dev_kfree_skb(skb); | 
 | 	for (i = 0; i < tx.u.tx.num_extra_frag; i++) | 
 | 		if (tx.u.tx.extra_frag[i]) | 
 | 			dev_kfree_skb(tx.u.tx.extra_frag[i]); | 
 | 	kfree(tx.u.tx.extra_frag); | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* device xmit handlers */ | 
 |  | 
 | int ieee80211_master_start_xmit(struct sk_buff *skb, | 
 | 				struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_tx_control control; | 
 | 	struct ieee80211_tx_packet_data *pkt_data; | 
 | 	struct net_device *odev = NULL; | 
 | 	struct ieee80211_sub_if_data *osdata; | 
 | 	int headroom; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * copy control out of the skb so other people can use skb->cb | 
 | 	 */ | 
 | 	pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | 
 | 	memset(&control, 0, sizeof(struct ieee80211_tx_control)); | 
 |  | 
 | 	if (pkt_data->ifindex) | 
 | 		odev = dev_get_by_index(&init_net, pkt_data->ifindex); | 
 | 	if (unlikely(odev && !is_ieee80211_device(odev, dev))) { | 
 | 		dev_put(odev); | 
 | 		odev = NULL; | 
 | 	} | 
 | 	if (unlikely(!odev)) { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 		printk(KERN_DEBUG "%s: Discarded packet with nonexistent " | 
 | 		       "originating device\n", dev->name); | 
 | #endif | 
 | 		dev_kfree_skb(skb); | 
 | 		return 0; | 
 | 	} | 
 | 	osdata = IEEE80211_DEV_TO_SUB_IF(odev); | 
 |  | 
 | 	headroom = osdata->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM; | 
 | 	if (skb_headroom(skb) < headroom) { | 
 | 		if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) { | 
 | 			dev_kfree_skb(skb); | 
 | 			dev_put(odev); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	control.ifindex = odev->ifindex; | 
 | 	control.type = osdata->type; | 
 | 	if (pkt_data->flags & IEEE80211_TXPD_REQ_TX_STATUS) | 
 | 		control.flags |= IEEE80211_TXCTL_REQ_TX_STATUS; | 
 | 	if (pkt_data->flags & IEEE80211_TXPD_DO_NOT_ENCRYPT) | 
 | 		control.flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; | 
 | 	if (pkt_data->flags & IEEE80211_TXPD_REQUEUE) | 
 | 		control.flags |= IEEE80211_TXCTL_REQUEUE; | 
 | 	control.queue = pkt_data->queue; | 
 |  | 
 | 	ret = ieee80211_tx(odev, skb, &control); | 
 | 	dev_put(odev); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int ieee80211_monitor_start_xmit(struct sk_buff *skb, | 
 | 				 struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 | 	struct ieee80211_tx_packet_data *pkt_data; | 
 | 	struct ieee80211_radiotap_header *prthdr = | 
 | 		(struct ieee80211_radiotap_header *)skb->data; | 
 | 	u16 len_rthdr; | 
 |  | 
 | 	/* check for not even having the fixed radiotap header part */ | 
 | 	if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) | 
 | 		goto fail; /* too short to be possibly valid */ | 
 |  | 
 | 	/* is it a header version we can trust to find length from? */ | 
 | 	if (unlikely(prthdr->it_version)) | 
 | 		goto fail; /* only version 0 is supported */ | 
 |  | 
 | 	/* then there must be a radiotap header with a length we can use */ | 
 | 	len_rthdr = ieee80211_get_radiotap_len(skb->data); | 
 |  | 
 | 	/* does the skb contain enough to deliver on the alleged length? */ | 
 | 	if (unlikely(skb->len < len_rthdr)) | 
 | 		goto fail; /* skb too short for claimed rt header extent */ | 
 |  | 
 | 	skb->dev = local->mdev; | 
 |  | 
 | 	pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | 
 | 	memset(pkt_data, 0, sizeof(*pkt_data)); | 
 | 	/* needed because we set skb device to master */ | 
 | 	pkt_data->ifindex = dev->ifindex; | 
 |  | 
 | 	pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT; | 
 |  | 
 | 	/* | 
 | 	 * fix up the pointers accounting for the radiotap | 
 | 	 * header still being in there.  We are being given | 
 | 	 * a precooked IEEE80211 header so no need for | 
 | 	 * normal processing | 
 | 	 */ | 
 | 	skb_set_mac_header(skb, len_rthdr); | 
 | 	/* | 
 | 	 * these are just fixed to the end of the rt area since we | 
 | 	 * don't have any better information and at this point, nobody cares | 
 | 	 */ | 
 | 	skb_set_network_header(skb, len_rthdr); | 
 | 	skb_set_transport_header(skb, len_rthdr); | 
 |  | 
 | 	/* pass the radiotap header up to the next stage intact */ | 
 | 	dev_queue_xmit(skb); | 
 | 	return NETDEV_TX_OK; | 
 |  | 
 | fail: | 
 | 	dev_kfree_skb(skb); | 
 | 	return NETDEV_TX_OK; /* meaning, we dealt with the skb */ | 
 | } | 
 |  | 
 | /** | 
 |  * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type | 
 |  * subinterfaces (wlan#, WDS, and VLAN interfaces) | 
 |  * @skb: packet to be sent | 
 |  * @dev: incoming interface | 
 |  * | 
 |  * Returns: 0 on success (and frees skb in this case) or 1 on failure (skb will | 
 |  * not be freed, and caller is responsible for either retrying later or freeing | 
 |  * skb). | 
 |  * | 
 |  * This function takes in an Ethernet header and encapsulates it with suitable | 
 |  * IEEE 802.11 header based on which interface the packet is coming in. The | 
 |  * encapsulated packet will then be passed to master interface, wlan#.11, for | 
 |  * transmission (through low-level driver). | 
 |  */ | 
 | int ieee80211_subif_start_xmit(struct sk_buff *skb, | 
 | 			       struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 | 	struct ieee80211_tx_packet_data *pkt_data; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	int ret = 1, head_need; | 
 | 	u16 ethertype, hdrlen, fc; | 
 | 	struct ieee80211_hdr hdr; | 
 | 	const u8 *encaps_data; | 
 | 	int encaps_len, skip_header_bytes; | 
 | 	int nh_pos, h_pos; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	if (unlikely(skb->len < ETH_HLEN)) { | 
 | 		printk(KERN_DEBUG "%s: short skb (len=%d)\n", | 
 | 		       dev->name, skb->len); | 
 | 		ret = 0; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	nh_pos = skb_network_header(skb) - skb->data; | 
 | 	h_pos = skb_transport_header(skb) - skb->data; | 
 |  | 
 | 	/* convert Ethernet header to proper 802.11 header (based on | 
 | 	 * operation mode) */ | 
 | 	ethertype = (skb->data[12] << 8) | skb->data[13]; | 
 | 	/* TODO: handling for 802.1x authorized/unauthorized port */ | 
 | 	fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; | 
 |  | 
 | 	switch (sdata->type) { | 
 | 	case IEEE80211_IF_TYPE_AP: | 
 | 	case IEEE80211_IF_TYPE_VLAN: | 
 | 		fc |= IEEE80211_FCTL_FROMDS; | 
 | 		/* DA BSSID SA */ | 
 | 		memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		break; | 
 | 	case IEEE80211_IF_TYPE_WDS: | 
 | 		fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; | 
 | 		/* RA TA DA SA */ | 
 | 		memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		hdrlen = 30; | 
 | 		break; | 
 | 	case IEEE80211_IF_TYPE_STA: | 
 | 		fc |= IEEE80211_FCTL_TODS; | 
 | 		/* BSSID SA DA */ | 
 | 		memcpy(hdr.addr1, sdata->u.sta.bssid, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		break; | 
 | 	case IEEE80211_IF_TYPE_IBSS: | 
 | 		/* DA SA BSSID */ | 
 | 		memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, sdata->u.sta.bssid, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		break; | 
 | 	default: | 
 | 		ret = 0; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	/* receiver is QoS enabled, use a QoS type frame */ | 
 | 	sta = sta_info_get(local, hdr.addr1); | 
 | 	if (sta) { | 
 | 		if (sta->flags & WLAN_STA_WME) { | 
 | 			fc |= IEEE80211_STYPE_QOS_DATA; | 
 | 			hdrlen += 2; | 
 | 		} | 
 | 		sta_info_put(sta); | 
 | 	} | 
 |  | 
 | 	hdr.frame_control = cpu_to_le16(fc); | 
 | 	hdr.duration_id = 0; | 
 | 	hdr.seq_ctrl = 0; | 
 |  | 
 | 	skip_header_bytes = ETH_HLEN; | 
 | 	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | 
 | 		encaps_data = bridge_tunnel_header; | 
 | 		encaps_len = sizeof(bridge_tunnel_header); | 
 | 		skip_header_bytes -= 2; | 
 | 	} else if (ethertype >= 0x600) { | 
 | 		encaps_data = rfc1042_header; | 
 | 		encaps_len = sizeof(rfc1042_header); | 
 | 		skip_header_bytes -= 2; | 
 | 	} else { | 
 | 		encaps_data = NULL; | 
 | 		encaps_len = 0; | 
 | 	} | 
 |  | 
 | 	skb_pull(skb, skip_header_bytes); | 
 | 	nh_pos -= skip_header_bytes; | 
 | 	h_pos -= skip_header_bytes; | 
 |  | 
 | 	/* TODO: implement support for fragments so that there is no need to | 
 | 	 * reallocate and copy payload; it might be enough to support one | 
 | 	 * extra fragment that would be copied in the beginning of the frame | 
 | 	 * data.. anyway, it would be nice to include this into skb structure | 
 | 	 * somehow | 
 | 	 * | 
 | 	 * There are few options for this: | 
 | 	 * use skb->cb as an extra space for 802.11 header | 
 | 	 * allocate new buffer if not enough headroom | 
 | 	 * make sure that there is enough headroom in every skb by increasing | 
 | 	 * build in headroom in __dev_alloc_skb() (linux/skbuff.h) and | 
 | 	 * alloc_skb() (net/core/skbuff.c) | 
 | 	 */ | 
 | 	head_need = hdrlen + encaps_len + local->tx_headroom; | 
 | 	head_need -= skb_headroom(skb); | 
 |  | 
 | 	/* We are going to modify skb data, so make a copy of it if happens to | 
 | 	 * be cloned. This could happen, e.g., with Linux bridge code passing | 
 | 	 * us broadcast frames. */ | 
 |  | 
 | 	if (head_need > 0 || skb_cloned(skb)) { | 
 | #if 0 | 
 | 		printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes " | 
 | 		       "of headroom\n", dev->name, head_need); | 
 | #endif | 
 |  | 
 | 		if (skb_cloned(skb)) | 
 | 			I802_DEBUG_INC(local->tx_expand_skb_head_cloned); | 
 | 		else | 
 | 			I802_DEBUG_INC(local->tx_expand_skb_head); | 
 | 		/* Since we have to reallocate the buffer, make sure that there | 
 | 		 * is enough room for possible WEP IV/ICV and TKIP (8 bytes | 
 | 		 * before payload and 12 after). */ | 
 | 		if (pskb_expand_head(skb, (head_need > 0 ? head_need + 8 : 8), | 
 | 				     12, GFP_ATOMIC)) { | 
 | 			printk(KERN_DEBUG "%s: failed to reallocate TX buffer" | 
 | 			       "\n", dev->name); | 
 | 			goto fail; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (encaps_data) { | 
 | 		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | 
 | 		nh_pos += encaps_len; | 
 | 		h_pos += encaps_len; | 
 | 	} | 
 |  | 
 | 	if (fc & IEEE80211_STYPE_QOS_DATA) { | 
 | 		__le16 *qos_control; | 
 |  | 
 | 		qos_control = (__le16*) skb_push(skb, 2); | 
 | 		memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); | 
 | 		/* | 
 | 		 * Maybe we could actually set some fields here, for now just | 
 | 		 * initialise to zero to indicate no special operation. | 
 | 		 */ | 
 | 		*qos_control = 0; | 
 | 	} else | 
 | 		memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | 
 |  | 
 | 	nh_pos += hdrlen; | 
 | 	h_pos += hdrlen; | 
 |  | 
 | 	pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; | 
 | 	memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data)); | 
 | 	pkt_data->ifindex = dev->ifindex; | 
 |  | 
 | 	skb->dev = local->mdev; | 
 | 	dev->stats.tx_packets++; | 
 | 	dev->stats.tx_bytes += skb->len; | 
 |  | 
 | 	/* Update skb pointers to various headers since this modified frame | 
 | 	 * is going to go through Linux networking code that may potentially | 
 | 	 * need things like pointer to IP header. */ | 
 | 	skb_set_mac_header(skb, 0); | 
 | 	skb_set_network_header(skb, nh_pos); | 
 | 	skb_set_transport_header(skb, h_pos); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 | 	dev_queue_xmit(skb); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  fail: | 
 | 	if (!ret) | 
 | 		dev_kfree_skb(skb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * This is the transmit routine for the 802.11 type interfaces | 
 |  * called by upper layers of the linux networking | 
 |  * stack when it has a frame to transmit | 
 |  */ | 
 | int ieee80211_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_tx_packet_data *pkt_data; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	u16 fc; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (skb->len < 10) { | 
 | 		dev_kfree_skb(skb); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (skb_headroom(skb) < sdata->local->tx_headroom) { | 
 | 		if (pskb_expand_head(skb, sdata->local->tx_headroom, | 
 | 				     0, GFP_ATOMIC)) { | 
 | 			dev_kfree_skb(skb); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	fc = le16_to_cpu(hdr->frame_control); | 
 |  | 
 | 	pkt_data = (struct ieee80211_tx_packet_data *) skb->cb; | 
 | 	memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data)); | 
 | 	pkt_data->ifindex = sdata->dev->ifindex; | 
 |  | 
 | 	skb->priority = 20; /* use hardcoded priority for mgmt TX queue */ | 
 | 	skb->dev = sdata->local->mdev; | 
 |  | 
 | 	/* | 
 | 	 * We're using the protocol field of the the frame control header | 
 | 	 * to request TX callback for hostapd. BIT(1) is checked. | 
 | 	 */ | 
 | 	if ((fc & BIT(1)) == BIT(1)) { | 
 | 		pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS; | 
 | 		fc &= ~BIT(1); | 
 | 		hdr->frame_control = cpu_to_le16(fc); | 
 | 	} | 
 |  | 
 | 	if (!(fc & IEEE80211_FCTL_PROTECTED)) | 
 | 		pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT; | 
 |  | 
 | 	dev->stats.tx_packets++; | 
 | 	dev->stats.tx_bytes += skb->len; | 
 |  | 
 | 	dev_queue_xmit(skb); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* helper functions for pending packets for when queues are stopped */ | 
 |  | 
 | void ieee80211_clear_tx_pending(struct ieee80211_local *local) | 
 | { | 
 | 	int i, j; | 
 | 	struct ieee80211_tx_stored_packet *store; | 
 |  | 
 | 	for (i = 0; i < local->hw.queues; i++) { | 
 | 		if (!__ieee80211_queue_pending(local, i)) | 
 | 			continue; | 
 | 		store = &local->pending_packet[i]; | 
 | 		kfree_skb(store->skb); | 
 | 		for (j = 0; j < store->num_extra_frag; j++) | 
 | 			kfree_skb(store->extra_frag[j]); | 
 | 		kfree(store->extra_frag); | 
 | 		clear_bit(IEEE80211_LINK_STATE_PENDING, &local->state[i]); | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_tx_pending(unsigned long data) | 
 | { | 
 | 	struct ieee80211_local *local = (struct ieee80211_local *)data; | 
 | 	struct net_device *dev = local->mdev; | 
 | 	struct ieee80211_tx_stored_packet *store; | 
 | 	struct ieee80211_txrx_data tx; | 
 | 	int i, ret, reschedule = 0; | 
 |  | 
 | 	netif_tx_lock_bh(dev); | 
 | 	for (i = 0; i < local->hw.queues; i++) { | 
 | 		if (__ieee80211_queue_stopped(local, i)) | 
 | 			continue; | 
 | 		if (!__ieee80211_queue_pending(local, i)) { | 
 | 			reschedule = 1; | 
 | 			continue; | 
 | 		} | 
 | 		store = &local->pending_packet[i]; | 
 | 		tx.u.tx.control = &store->control; | 
 | 		tx.u.tx.extra_frag = store->extra_frag; | 
 | 		tx.u.tx.num_extra_frag = store->num_extra_frag; | 
 | 		tx.u.tx.last_frag_hwrate = store->last_frag_hwrate; | 
 | 		tx.u.tx.last_frag_rate = store->last_frag_rate; | 
 | 		tx.flags = 0; | 
 | 		if (store->last_frag_rate_ctrl_probe) | 
 | 			tx.flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG; | 
 | 		ret = __ieee80211_tx(local, store->skb, &tx); | 
 | 		if (ret) { | 
 | 			if (ret == IEEE80211_TX_FRAG_AGAIN) | 
 | 				store->skb = NULL; | 
 | 		} else { | 
 | 			clear_bit(IEEE80211_LINK_STATE_PENDING, | 
 | 				  &local->state[i]); | 
 | 			reschedule = 1; | 
 | 		} | 
 | 	} | 
 | 	netif_tx_unlock_bh(dev); | 
 | 	if (reschedule) { | 
 | 		if (!ieee80211_qdisc_installed(dev)) { | 
 | 			if (!__ieee80211_queue_stopped(local, 0)) | 
 | 				netif_wake_queue(dev); | 
 | 		} else | 
 | 			netif_schedule(dev); | 
 | 	} | 
 | } | 
 |  | 
 | /* functions for drivers to get certain frames */ | 
 |  | 
 | static void ieee80211_beacon_add_tim(struct ieee80211_local *local, | 
 | 				     struct ieee80211_if_ap *bss, | 
 | 				     struct sk_buff *skb) | 
 | { | 
 | 	u8 *pos, *tim; | 
 | 	int aid0 = 0; | 
 | 	int i, have_bits = 0, n1, n2; | 
 |  | 
 | 	/* Generate bitmap for TIM only if there are any STAs in power save | 
 | 	 * mode. */ | 
 | 	read_lock_bh(&local->sta_lock); | 
 | 	if (atomic_read(&bss->num_sta_ps) > 0) | 
 | 		/* in the hope that this is faster than | 
 | 		 * checking byte-for-byte */ | 
 | 		have_bits = !bitmap_empty((unsigned long*)bss->tim, | 
 | 					  IEEE80211_MAX_AID+1); | 
 |  | 
 | 	if (bss->dtim_count == 0) | 
 | 		bss->dtim_count = bss->dtim_period - 1; | 
 | 	else | 
 | 		bss->dtim_count--; | 
 |  | 
 | 	tim = pos = (u8 *) skb_put(skb, 6); | 
 | 	*pos++ = WLAN_EID_TIM; | 
 | 	*pos++ = 4; | 
 | 	*pos++ = bss->dtim_count; | 
 | 	*pos++ = bss->dtim_period; | 
 |  | 
 | 	if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf)) | 
 | 		aid0 = 1; | 
 |  | 
 | 	if (have_bits) { | 
 | 		/* Find largest even number N1 so that bits numbered 1 through | 
 | 		 * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits | 
 | 		 * (N2 + 1) x 8 through 2007 are 0. */ | 
 | 		n1 = 0; | 
 | 		for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { | 
 | 			if (bss->tim[i]) { | 
 | 				n1 = i & 0xfe; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		n2 = n1; | 
 | 		for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { | 
 | 			if (bss->tim[i]) { | 
 | 				n2 = i; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Bitmap control */ | 
 | 		*pos++ = n1 | aid0; | 
 | 		/* Part Virt Bitmap */ | 
 | 		memcpy(pos, bss->tim + n1, n2 - n1 + 1); | 
 |  | 
 | 		tim[1] = n2 - n1 + 4; | 
 | 		skb_put(skb, n2 - n1); | 
 | 	} else { | 
 | 		*pos++ = aid0; /* Bitmap control */ | 
 | 		*pos++ = 0; /* Part Virt Bitmap */ | 
 | 	} | 
 | 	read_unlock_bh(&local->sta_lock); | 
 | } | 
 |  | 
 | struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, int if_id, | 
 | 				     struct ieee80211_tx_control *control) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct sk_buff *skb; | 
 | 	struct net_device *bdev; | 
 | 	struct ieee80211_sub_if_data *sdata = NULL; | 
 | 	struct ieee80211_if_ap *ap = NULL; | 
 | 	struct ieee80211_rate *rate; | 
 | 	struct rate_control_extra extra; | 
 | 	u8 *b_head, *b_tail; | 
 | 	int bh_len, bt_len; | 
 |  | 
 | 	bdev = dev_get_by_index(&init_net, if_id); | 
 | 	if (bdev) { | 
 | 		sdata = IEEE80211_DEV_TO_SUB_IF(bdev); | 
 | 		ap = &sdata->u.ap; | 
 | 		dev_put(bdev); | 
 | 	} | 
 |  | 
 | 	if (!ap || sdata->type != IEEE80211_IF_TYPE_AP || | 
 | 	    !ap->beacon_head) { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_DEBUG "no beacon data avail for idx=%d " | 
 | 			       "(%s)\n", if_id, bdev ? bdev->name : "N/A"); | 
 | #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* Assume we are generating the normal beacon locally */ | 
 | 	b_head = ap->beacon_head; | 
 | 	b_tail = ap->beacon_tail; | 
 | 	bh_len = ap->beacon_head_len; | 
 | 	bt_len = ap->beacon_tail_len; | 
 |  | 
 | 	skb = dev_alloc_skb(local->tx_headroom + | 
 | 		bh_len + bt_len + 256 /* maximum TIM len */); | 
 | 	if (!skb) | 
 | 		return NULL; | 
 |  | 
 | 	skb_reserve(skb, local->tx_headroom); | 
 | 	memcpy(skb_put(skb, bh_len), b_head, bh_len); | 
 |  | 
 | 	ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data); | 
 |  | 
 | 	ieee80211_beacon_add_tim(local, ap, skb); | 
 |  | 
 | 	if (b_tail) { | 
 | 		memcpy(skb_put(skb, bt_len), b_tail, bt_len); | 
 | 	} | 
 |  | 
 | 	if (control) { | 
 | 		memset(&extra, 0, sizeof(extra)); | 
 | 		extra.mode = local->oper_hw_mode; | 
 |  | 
 | 		rate = rate_control_get_rate(local, local->mdev, skb, &extra); | 
 | 		if (!rate) { | 
 | 			if (net_ratelimit()) { | 
 | 				printk(KERN_DEBUG "%s: ieee80211_beacon_get: no rate " | 
 | 				       "found\n", wiphy_name(local->hw.wiphy)); | 
 | 			} | 
 | 			dev_kfree_skb(skb); | 
 | 			return NULL; | 
 | 		} | 
 |  | 
 | 		control->tx_rate = | 
 | 			((sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE) && | 
 | 			(rate->flags & IEEE80211_RATE_PREAMBLE2)) ? | 
 | 			rate->val2 : rate->val; | 
 | 		control->antenna_sel_tx = local->hw.conf.antenna_sel_tx; | 
 | 		control->power_level = local->hw.conf.power_level; | 
 | 		control->flags |= IEEE80211_TXCTL_NO_ACK; | 
 | 		control->retry_limit = 1; | 
 | 		control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; | 
 | 	} | 
 |  | 
 | 	ap->num_beacons++; | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_beacon_get); | 
 |  | 
 | void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id, | 
 | 		       const void *frame, size_t frame_len, | 
 | 		       const struct ieee80211_tx_control *frame_txctl, | 
 | 		       struct ieee80211_rts *rts) | 
 | { | 
 | 	const struct ieee80211_hdr *hdr = frame; | 
 | 	u16 fctl; | 
 |  | 
 | 	fctl = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS; | 
 | 	rts->frame_control = cpu_to_le16(fctl); | 
 | 	rts->duration = ieee80211_rts_duration(hw, if_id, frame_len, frame_txctl); | 
 | 	memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); | 
 | 	memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rts_get); | 
 |  | 
 | void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id, | 
 | 			     const void *frame, size_t frame_len, | 
 | 			     const struct ieee80211_tx_control *frame_txctl, | 
 | 			     struct ieee80211_cts *cts) | 
 | { | 
 | 	const struct ieee80211_hdr *hdr = frame; | 
 | 	u16 fctl; | 
 |  | 
 | 	fctl = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS; | 
 | 	cts->frame_control = cpu_to_le16(fctl); | 
 | 	cts->duration = ieee80211_ctstoself_duration(hw, if_id, frame_len, frame_txctl); | 
 | 	memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_ctstoself_get); | 
 |  | 
 | struct sk_buff * | 
 | ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id, | 
 | 			  struct ieee80211_tx_control *control) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct sk_buff *skb; | 
 | 	struct sta_info *sta; | 
 | 	ieee80211_tx_handler *handler; | 
 | 	struct ieee80211_txrx_data tx; | 
 | 	ieee80211_txrx_result res = TXRX_DROP; | 
 | 	struct net_device *bdev; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_if_ap *bss = NULL; | 
 |  | 
 | 	bdev = dev_get_by_index(&init_net, if_id); | 
 | 	if (bdev) { | 
 | 		sdata = IEEE80211_DEV_TO_SUB_IF(bdev); | 
 | 		bss = &sdata->u.ap; | 
 | 		dev_put(bdev); | 
 | 	} | 
 | 	if (!bss || sdata->type != IEEE80211_IF_TYPE_AP || !bss->beacon_head) | 
 | 		return NULL; | 
 |  | 
 | 	if (bss->dtim_count != 0) | 
 | 		return NULL; /* send buffered bc/mc only after DTIM beacon */ | 
 | 	memset(control, 0, sizeof(*control)); | 
 | 	while (1) { | 
 | 		skb = skb_dequeue(&bss->ps_bc_buf); | 
 | 		if (!skb) | 
 | 			return NULL; | 
 | 		local->total_ps_buffered--; | 
 |  | 
 | 		if (!skb_queue_empty(&bss->ps_bc_buf) && skb->len >= 2) { | 
 | 			struct ieee80211_hdr *hdr = | 
 | 				(struct ieee80211_hdr *) skb->data; | 
 | 			/* more buffered multicast/broadcast frames ==> set | 
 | 			 * MoreData flag in IEEE 802.11 header to inform PS | 
 | 			 * STAs */ | 
 | 			hdr->frame_control |= | 
 | 				cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
 | 		} | 
 |  | 
 | 		if (!ieee80211_tx_prepare(&tx, skb, local->mdev, control)) | 
 | 			break; | 
 | 		dev_kfree_skb_any(skb); | 
 | 	} | 
 | 	sta = tx.sta; | 
 | 	tx.flags |= IEEE80211_TXRXD_TXPS_BUFFERED; | 
 | 	tx.u.tx.mode = local->hw.conf.mode; | 
 |  | 
 | 	for (handler = local->tx_handlers; *handler != NULL; handler++) { | 
 | 		res = (*handler)(&tx); | 
 | 		if (res == TXRX_DROP || res == TXRX_QUEUED) | 
 | 			break; | 
 | 	} | 
 | 	dev_put(tx.dev); | 
 | 	skb = tx.skb; /* handlers are allowed to change skb */ | 
 |  | 
 | 	if (res == TXRX_DROP) { | 
 | 		I802_DEBUG_INC(local->tx_handlers_drop); | 
 | 		dev_kfree_skb(skb); | 
 | 		skb = NULL; | 
 | 	} else if (res == TXRX_QUEUED) { | 
 | 		I802_DEBUG_INC(local->tx_handlers_queued); | 
 | 		skb = NULL; | 
 | 	} | 
 |  | 
 | 	if (sta) | 
 | 		sta_info_put(sta); | 
 |  | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_get_buffered_bc); |