blob: a3fd30242bd87d2a8c77f2c6ade2a3c96259e039 [file] [log] [blame]
/*
* Koelsch board support - Reference DT implementation
*
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/rcar-gen2.h>
#include <mach/r8a7791.h>
#include <asm/mach/arch.h>
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
.type = RCAR_DU_ENCODER_NONE,
.output = RCAR_DU_OUTPUT_LVDS0,
.connector.lvds.panel = {
.width_mm = 210,
.height_mm = 158,
.mode = {
.clock = 65000,
.hdisplay = 1024,
.hsync_start = 1048,
.hsync_end = 1184,
.htotal = 1344,
.vdisplay = 768,
.vsync_start = 771,
.vsync_end = 777,
.vtotal = 806,
.flags = 0,
},
},
},
};
static struct rcar_du_platform_data koelsch_du_pdata = {
.encoders = koelsch_du_encoders,
.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
};
static const struct resource du_resources[] __initconst = {
DEFINE_RES_MEM(0xfeb00000, 0x40000),
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
DEFINE_RES_IRQ(gic_spi(256)),
DEFINE_RES_IRQ(gic_spi(268)),
};
static void __init koelsch_add_du_device(void)
{
struct platform_device_info info = {
.name = "rcar-du-r8a7791",
.id = -1,
.res = du_resources,
.num_res = ARRAY_SIZE(du_resources),
.data = &koelsch_du_pdata,
.size_data = sizeof(koelsch_du_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&info);
}
static void __init koelsch_add_standard_devices(void)
{
/*
* This is a really crude hack to provide clkdev support to the CMT and
* DU devices until they get moved to DT.
*/
static const struct clk_name {
const char *clk;
const char *con_id;
const char *dev_id;
} clk_names[] = {
{ "cmt0", NULL, "sh_cmt.0" },
{ "scifa0", NULL, "sh-sci.0" },
{ "scifa1", NULL, "sh-sci.1" },
{ "scifb0", NULL, "sh-sci.2" },
{ "scifb1", NULL, "sh-sci.3" },
{ "scifb2", NULL, "sh-sci.4" },
{ "scifa2", NULL, "sh-sci.5" },
{ "scif0", NULL, "sh-sci.6" },
{ "scif1", NULL, "sh-sci.7" },
{ "scif2", NULL, "sh-sci.8" },
{ "scif3", NULL, "sh-sci.9" },
{ "scif4", NULL, "sh-sci.10" },
{ "scif5", NULL, "sh-sci.11" },
{ "scifa3", NULL, "sh-sci.12" },
{ "scifa4", NULL, "sh-sci.13" },
{ "scifa5", NULL, "sh-sci.14" },
{ "du0", "du.0", "rcar-du-r8a7791" },
{ "du1", "du.1", "rcar-du-r8a7791" },
{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
};
struct clk *clk;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(clk_names); ++i) {
clk = clk_get(NULL, clk_names[i].clk);
if (!IS_ERR(clk)) {
clk_register_clkdev(clk, clk_names[i].con_id,
clk_names[i].dev_id);
clk_put(clk);
}
}
r8a7791_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
koelsch_add_du_device();
}
static const char * const koelsch_boards_compat_dt[] __initconst = {
"renesas,koelsch",
"renesas,koelsch-reference",
NULL,
};
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
.init_early = r8a7791_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = koelsch_boards_compat_dt,
MACHINE_END