blob: 52819e816f87fe0ba144fd78b52143c140897da3 [file] [log] [blame]
/*
* Code for replacing ftrace calls with jumps.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
*
* Thanks goes to Ingo Molnar, for suggesting the idea.
* Mathieu Desnoyers, for suggesting postponing the modifications.
* Arjan van de Ven, for keeping me straight, and explaining to me
* the dangers of modifying code on the run.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <trace/syscall.h>
#include <asm/cacheflush.h>
#include <asm/kprobes.h>
#include <asm/ftrace.h>
#include <asm/nops.h>
#ifdef CONFIG_DYNAMIC_FTRACE
int ftrace_arch_code_modify_prepare(void)
{
set_kernel_text_rw();
set_all_modules_text_rw();
return 0;
}
int ftrace_arch_code_modify_post_process(void)
{
set_all_modules_text_ro();
set_kernel_text_ro();
return 0;
}
union ftrace_code_union {
char code[MCOUNT_INSN_SIZE];
struct {
char e8;
int offset;
} __attribute__((packed));
};
static int ftrace_calc_offset(long ip, long addr)
{
return (int)(addr - ip);
}
static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
{
static union ftrace_code_union calc;
calc.e8 = 0xe8;
calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
/*
* No locking needed, this must be called via kstop_machine
* which in essence is like running on a uniprocessor machine.
*/
return calc.code;
}
static inline int
within(unsigned long addr, unsigned long start, unsigned long end)
{
return addr >= start && addr < end;
}
static unsigned long text_ip_addr(unsigned long ip)
{
/*
* On x86_64, kernel text mappings are mapped read-only with
* CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
* of the kernel text mapping to modify the kernel text.
*
* For 32bit kernels, these mappings are same and we can use
* kernel identity mapping to modify code.
*/
if (within(ip, (unsigned long)_text, (unsigned long)_etext))
ip = (unsigned long)__va(__pa_symbol(ip));
return ip;
}
static const unsigned char *ftrace_nop_replace(void)
{
return ideal_nops[NOP_ATOMIC5];
}
static int
ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
unsigned const char *new_code)
{
unsigned char replaced[MCOUNT_INSN_SIZE];
/*
* Note: Due to modules and __init, code can
* disappear and change, we need to protect against faulting
* as well as code changing. We do this by using the
* probe_kernel_* functions.
*
* No real locking needed, this code is run through
* kstop_machine, or before SMP starts.
*/
/* read the text we want to modify */
if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure it is what we expect it to be */
if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
return -EINVAL;
ip = text_ip_addr(ip);
/* replace the text with the new text */
if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
return -EPERM;
sync_core();
return 0;
}
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned const char *new, *old;
unsigned long ip = rec->ip;
old = ftrace_call_replace(ip, addr);
new = ftrace_nop_replace();
/*
* On boot up, and when modules are loaded, the MCOUNT_ADDR
* is converted to a nop, and will never become MCOUNT_ADDR
* again. This code is either running before SMP (on boot up)
* or before the code will ever be executed (module load).
* We do not want to use the breakpoint version in this case,
* just modify the code directly.
*/
if (addr == MCOUNT_ADDR)
return ftrace_modify_code_direct(rec->ip, old, new);
/* Normal cases use add_brk_on_nop */
WARN_ONCE(1, "invalid use of ftrace_make_nop");
return -EINVAL;
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned const char *new, *old;
unsigned long ip = rec->ip;
old = ftrace_nop_replace();
new = ftrace_call_replace(ip, addr);
/* Should only be called when module is loaded */
return ftrace_modify_code_direct(rec->ip, old, new);
}
/*
* The modifying_ftrace_code is used to tell the breakpoint
* handler to call ftrace_int3_handler(). If it fails to
* call this handler for a breakpoint added by ftrace, then
* the kernel may crash.
*
* As atomic_writes on x86 do not need a barrier, we do not
* need to add smp_mb()s for this to work. It is also considered
* that we can not read the modifying_ftrace_code before
* executing the breakpoint. That would be quite remarkable if
* it could do that. Here's the flow that is required:
*
* CPU-0 CPU-1
*
* atomic_inc(mfc);
* write int3s
* <trap-int3> // implicit (r)mb
* if (atomic_read(mfc))
* call ftrace_int3_handler()
*
* Then when we are finished:
*
* atomic_dec(mfc);
*
* If we hit a breakpoint that was not set by ftrace, it does not
* matter if ftrace_int3_handler() is called or not. It will
* simply be ignored. But it is crucial that a ftrace nop/caller
* breakpoint is handled. No other user should ever place a
* breakpoint on an ftrace nop/caller location. It must only
* be done by this code.
*/
atomic_t modifying_ftrace_code __read_mostly;
static int
ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
unsigned const char *new_code);
/*
* Should never be called:
* As it is only called by __ftrace_replace_code() which is called by
* ftrace_replace_code() that x86 overrides, and by ftrace_update_code()
* which is called to turn mcount into nops or nops into function calls
* but not to convert a function from not using regs to one that uses
* regs, which ftrace_modify_call() is for.
*/
int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
WARN_ON(1);
return -EINVAL;
}
static unsigned long ftrace_update_func;
static int update_ftrace_func(unsigned long ip, void *new)
{
unsigned char old[MCOUNT_INSN_SIZE];
int ret;
memcpy(old, (void *)ip, MCOUNT_INSN_SIZE);
ftrace_update_func = ip;
/* Make sure the breakpoints see the ftrace_update_func update */
smp_wmb();
/* See comment above by declaration of modifying_ftrace_code */
atomic_inc(&modifying_ftrace_code);
ret = ftrace_modify_code(ip, old, new);
atomic_dec(&modifying_ftrace_code);
return ret;
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip = (unsigned long)(&ftrace_call);
unsigned char *new;
int ret;
new = ftrace_call_replace(ip, (unsigned long)func);
ret = update_ftrace_func(ip, new);
/* Also update the regs callback function */
if (!ret) {
ip = (unsigned long)(&ftrace_regs_call);
new = ftrace_call_replace(ip, (unsigned long)func);
ret = update_ftrace_func(ip, new);
}
return ret;
}
static int is_ftrace_caller(unsigned long ip)
{
if (ip == ftrace_update_func)
return 1;
return 0;
}
/*
* A breakpoint was added to the code address we are about to
* modify, and this is the handle that will just skip over it.
* We are either changing a nop into a trace call, or a trace
* call to a nop. While the change is taking place, we treat
* it just like it was a nop.
*/
int ftrace_int3_handler(struct pt_regs *regs)
{
unsigned long ip;
if (WARN_ON_ONCE(!regs))
return 0;
ip = regs->ip - 1;
if (!ftrace_location(ip) && !is_ftrace_caller(ip))
return 0;
regs->ip += MCOUNT_INSN_SIZE - 1;
return 1;
}
static int ftrace_write(unsigned long ip, const char *val, int size)
{
/*
* On x86_64, kernel text mappings are mapped read-only with
* CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
* of the kernel text mapping to modify the kernel text.
*
* For 32bit kernels, these mappings are same and we can use
* kernel identity mapping to modify code.
*/
if (within(ip, (unsigned long)_text, (unsigned long)_etext))
ip = (unsigned long)__va(__pa_symbol(ip));
if (probe_kernel_write((void *)ip, val, size))
return -EPERM;
return 0;
}
static int add_break(unsigned long ip, const char *old)
{
unsigned char replaced[MCOUNT_INSN_SIZE];
unsigned char brk = BREAKPOINT_INSTRUCTION;
if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure it is what we expect it to be */
if (memcmp(replaced, old, MCOUNT_INSN_SIZE) != 0)
return -EINVAL;
return ftrace_write(ip, &brk, 1);
}
static int add_brk_on_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned const char *old;
unsigned long ip = rec->ip;
old = ftrace_call_replace(ip, addr);
return add_break(rec->ip, old);
}
static int add_brk_on_nop(struct dyn_ftrace *rec)
{
unsigned const char *old;
old = ftrace_nop_replace();
return add_break(rec->ip, old);
}
/*
* If the record has the FTRACE_FL_REGS set, that means that it
* wants to convert to a callback that saves all regs. If FTRACE_FL_REGS
* is not not set, then it wants to convert to the normal callback.
*/
static unsigned long get_ftrace_addr(struct dyn_ftrace *rec)
{
if (rec->flags & FTRACE_FL_REGS)
return (unsigned long)FTRACE_REGS_ADDR;
else
return (unsigned long)FTRACE_ADDR;
}
/*
* The FTRACE_FL_REGS_EN is set when the record already points to
* a function that saves all the regs. Basically the '_EN' version
* represents the current state of the function.
*/
static unsigned long get_ftrace_old_addr(struct dyn_ftrace *rec)
{
if (rec->flags & FTRACE_FL_REGS_EN)
return (unsigned long)FTRACE_REGS_ADDR;
else
return (unsigned long)FTRACE_ADDR;
}
static int add_breakpoints(struct dyn_ftrace *rec, int enable)
{
unsigned long ftrace_addr;
int ret;
ret = ftrace_test_record(rec, enable);
ftrace_addr = get_ftrace_addr(rec);
switch (ret) {
case FTRACE_UPDATE_IGNORE:
return 0;
case FTRACE_UPDATE_MAKE_CALL:
/* converting nop to call */
return add_brk_on_nop(rec);
case FTRACE_UPDATE_MODIFY_CALL_REGS:
case FTRACE_UPDATE_MODIFY_CALL:
ftrace_addr = get_ftrace_old_addr(rec);
/* fall through */
case FTRACE_UPDATE_MAKE_NOP:
/* converting a call to a nop */
return add_brk_on_call(rec, ftrace_addr);
}
return 0;
}
/*
* On error, we need to remove breakpoints. This needs to
* be done caefully. If the address does not currently have a
* breakpoint, we know we are done. Otherwise, we look at the
* remaining 4 bytes of the instruction. If it matches a nop
* we replace the breakpoint with the nop. Otherwise we replace
* it with the call instruction.
*/
static int remove_breakpoint(struct dyn_ftrace *rec)
{
unsigned char ins[MCOUNT_INSN_SIZE];
unsigned char brk = BREAKPOINT_INSTRUCTION;
const unsigned char *nop;
unsigned long ftrace_addr;
unsigned long ip = rec->ip;
/* If we fail the read, just give up */
if (probe_kernel_read(ins, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* If this does not have a breakpoint, we are done */
if (ins[0] != brk)
return 0;
nop = ftrace_nop_replace();
/*
* If the last 4 bytes of the instruction do not match
* a nop, then we assume that this is a call to ftrace_addr.
*/
if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0) {
/*
* For extra paranoidism, we check if the breakpoint is on
* a call that would actually jump to the ftrace_addr.
* If not, don't touch the breakpoint, we make just create
* a disaster.
*/
ftrace_addr = get_ftrace_addr(rec);
nop = ftrace_call_replace(ip, ftrace_addr);
if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) == 0)
goto update;
/* Check both ftrace_addr and ftrace_old_addr */
ftrace_addr = get_ftrace_old_addr(rec);
nop = ftrace_call_replace(ip, ftrace_addr);
if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0)
return -EINVAL;
}
update:
return ftrace_write(ip, nop, 1);
}
static int add_update_code(unsigned long ip, unsigned const char *new)
{
/* skip breakpoint */
ip++;
new++;
return ftrace_write(ip, new, MCOUNT_INSN_SIZE - 1);
}
static int add_update_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
unsigned const char *new;
new = ftrace_call_replace(ip, addr);
return add_update_code(ip, new);
}
static int add_update_nop(struct dyn_ftrace *rec)
{
unsigned long ip = rec->ip;
unsigned const char *new;
new = ftrace_nop_replace();
return add_update_code(ip, new);
}
static int add_update(struct dyn_ftrace *rec, int enable)
{
unsigned long ftrace_addr;
int ret;
ret = ftrace_test_record(rec, enable);
ftrace_addr = get_ftrace_addr(rec);
switch (ret) {
case FTRACE_UPDATE_IGNORE:
return 0;
case FTRACE_UPDATE_MODIFY_CALL_REGS:
case FTRACE_UPDATE_MODIFY_CALL:
case FTRACE_UPDATE_MAKE_CALL:
/* converting nop to call */
return add_update_call(rec, ftrace_addr);
case FTRACE_UPDATE_MAKE_NOP:
/* converting a call to a nop */
return add_update_nop(rec);
}
return 0;
}
static int finish_update_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
unsigned const char *new;
new = ftrace_call_replace(ip, addr);
return ftrace_write(ip, new, 1);
}
static int finish_update_nop(struct dyn_ftrace *rec)
{
unsigned long ip = rec->ip;
unsigned const char *new;
new = ftrace_nop_replace();
return ftrace_write(ip, new, 1);
}
static int finish_update(struct dyn_ftrace *rec, int enable)
{
unsigned long ftrace_addr;
int ret;
ret = ftrace_update_record(rec, enable);
ftrace_addr = get_ftrace_addr(rec);
switch (ret) {
case FTRACE_UPDATE_IGNORE:
return 0;
case FTRACE_UPDATE_MODIFY_CALL_REGS:
case FTRACE_UPDATE_MODIFY_CALL:
case FTRACE_UPDATE_MAKE_CALL:
/* converting nop to call */
return finish_update_call(rec, ftrace_addr);
case FTRACE_UPDATE_MAKE_NOP:
/* converting a call to a nop */
return finish_update_nop(rec);
}
return 0;
}
static void do_sync_core(void *data)
{
sync_core();
}
static void run_sync(void)
{
int enable_irqs = irqs_disabled();
/* We may be called with interrupts disbled (on bootup). */
if (enable_irqs)
local_irq_enable();
on_each_cpu(do_sync_core, NULL, 1);
if (enable_irqs)
local_irq_disable();
}
void ftrace_replace_code(int enable)
{
struct ftrace_rec_iter *iter;
struct dyn_ftrace *rec;
const char *report = "adding breakpoints";
int count = 0;
int ret;
for_ftrace_rec_iter(iter) {
rec = ftrace_rec_iter_record(iter);
ret = add_breakpoints(rec, enable);
if (ret)
goto remove_breakpoints;
count++;
}
run_sync();
report = "updating code";
for_ftrace_rec_iter(iter) {
rec = ftrace_rec_iter_record(iter);
ret = add_update(rec, enable);
if (ret)
goto remove_breakpoints;
}
run_sync();
report = "removing breakpoints";
for_ftrace_rec_iter(iter) {
rec = ftrace_rec_iter_record(iter);
ret = finish_update(rec, enable);
if (ret)
goto remove_breakpoints;
}
run_sync();
return;
remove_breakpoints:
ftrace_bug(ret, rec ? rec->ip : 0);
printk(KERN_WARNING "Failed on %s (%d):\n", report, count);
for_ftrace_rec_iter(iter) {
rec = ftrace_rec_iter_record(iter);
/*
* Breakpoints are handled only when this function is in
* progress. The system could not work with them.
*/
if (remove_breakpoint(rec))
BUG();
}
run_sync();
}
static int
ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
unsigned const char *new_code)
{
int ret;
ret = add_break(ip, old_code);
if (ret)
goto out;
run_sync();
ret = add_update_code(ip, new_code);
if (ret)
goto fail_update;
run_sync();
ret = ftrace_write(ip, new_code, 1);
/*
* The breakpoint is handled only when this function is in progress.
* The system could not work if we could not remove it.
*/
BUG_ON(ret);
out:
run_sync();
return ret;
fail_update:
/* Also here the system could not work with the breakpoint */
if (ftrace_write(ip, old_code, 1))
BUG();
goto out;
}
void arch_ftrace_update_code(int command)
{
/* See comment above by declaration of modifying_ftrace_code */
atomic_inc(&modifying_ftrace_code);
ftrace_modify_all_code(command);
atomic_dec(&modifying_ftrace_code);
}
int __init ftrace_dyn_arch_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
static unsigned char *ftrace_jmp_replace(unsigned long ip, unsigned long addr)
{
static union ftrace_code_union calc;
/* Jmp not a call (ignore the .e8) */
calc.e8 = 0xe9;
calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
/*
* ftrace external locks synchronize the access to the static variable.
*/
return calc.code;
}
static int ftrace_mod_jmp(unsigned long ip, void *func)
{
unsigned char *new;
new = ftrace_jmp_replace(ip, (unsigned long)func);
return update_ftrace_func(ip, new);
}
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
return ftrace_mod_jmp(ip, &ftrace_graph_caller);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
return ftrace_mod_jmp(ip, &ftrace_stub);
}
#endif /* !CONFIG_DYNAMIC_FTRACE */
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
unsigned long frame_pointer)
{
unsigned long old;
int faulted;
struct ftrace_graph_ent trace;
unsigned long return_hooker = (unsigned long)
&return_to_handler;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
/*
* Protect against fault, even if it shouldn't
* happen. This tool is too much intrusive to
* ignore such a protection.
*/
asm volatile(
"1: " _ASM_MOV " (%[parent]), %[old]\n"
"2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
" movl $0, %[faulted]\n"
"3:\n"
".section .fixup, \"ax\"\n"
"4: movl $1, %[faulted]\n"
" jmp 3b\n"
".previous\n"
_ASM_EXTABLE(1b, 4b)
_ASM_EXTABLE(2b, 4b)
: [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
if (unlikely(faulted)) {
ftrace_graph_stop();
WARN_ON(1);
return;
}
trace.func = self_addr;
trace.depth = current->curr_ret_stack + 1;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
*parent = old;
return;
}
if (ftrace_push_return_trace(old, self_addr, &trace.depth,
frame_pointer) == -EBUSY) {
*parent = old;
return;
}
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */