| /* |
| * Watchdog driver for Broadcom BCM2835 |
| * |
| * "bcm2708_wdog" driver written by Luke Diamand that was obtained from |
| * branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used |
| * as a hardware reference for the Broadcom BCM2835 watchdog timer. |
| * |
| * Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/watchdog.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_address.h> |
| |
| #define PM_RSTC 0x1c |
| #define PM_WDOG 0x24 |
| |
| #define PM_PASSWORD 0x5a000000 |
| |
| #define PM_WDOG_TIME_SET 0x000fffff |
| #define PM_RSTC_WRCFG_CLR 0xffffffcf |
| #define PM_RSTC_WRCFG_SET 0x00000030 |
| #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 |
| #define PM_RSTC_RESET 0x00000102 |
| |
| #define SECS_TO_WDOG_TICKS(x) ((x) << 16) |
| #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) |
| |
| struct bcm2835_wdt { |
| void __iomem *base; |
| spinlock_t lock; |
| }; |
| |
| static unsigned int heartbeat; |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| |
| static int bcm2835_wdt_start(struct watchdog_device *wdog) |
| { |
| struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); |
| uint32_t cur; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&wdt->lock, flags); |
| |
| writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) & |
| PM_WDOG_TIME_SET), wdt->base + PM_WDOG); |
| cur = readl_relaxed(wdt->base + PM_RSTC); |
| writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) | |
| PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC); |
| |
| spin_unlock_irqrestore(&wdt->lock, flags); |
| |
| return 0; |
| } |
| |
| static int bcm2835_wdt_stop(struct watchdog_device *wdog) |
| { |
| struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); |
| |
| writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC); |
| dev_info(wdog->dev, "Watchdog timer stopped"); |
| return 0; |
| } |
| |
| static int bcm2835_wdt_set_timeout(struct watchdog_device *wdog, unsigned int t) |
| { |
| wdog->timeout = t; |
| return 0; |
| } |
| |
| static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog) |
| { |
| struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); |
| |
| uint32_t ret = readl_relaxed(wdt->base + PM_WDOG); |
| return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET); |
| } |
| |
| static struct watchdog_ops bcm2835_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = bcm2835_wdt_start, |
| .stop = bcm2835_wdt_stop, |
| .set_timeout = bcm2835_wdt_set_timeout, |
| .get_timeleft = bcm2835_wdt_get_timeleft, |
| }; |
| |
| static struct watchdog_info bcm2835_wdt_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | |
| WDIOF_KEEPALIVEPING, |
| .identity = "Broadcom BCM2835 Watchdog timer", |
| }; |
| |
| static struct watchdog_device bcm2835_wdt_wdd = { |
| .info = &bcm2835_wdt_info, |
| .ops = &bcm2835_wdt_ops, |
| .min_timeout = 1, |
| .max_timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), |
| .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), |
| }; |
| |
| static int bcm2835_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct bcm2835_wdt *wdt; |
| int err; |
| |
| wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, wdt); |
| |
| spin_lock_init(&wdt->lock); |
| |
| wdt->base = of_iomap(np, 0); |
| if (!wdt->base) { |
| dev_err(dev, "Failed to remap watchdog regs"); |
| return -ENODEV; |
| } |
| |
| watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt); |
| watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev); |
| watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout); |
| err = watchdog_register_device(&bcm2835_wdt_wdd); |
| if (err) { |
| dev_err(dev, "Failed to register watchdog device"); |
| iounmap(wdt->base); |
| return err; |
| } |
| |
| dev_info(dev, "Broadcom BCM2835 watchdog timer"); |
| return 0; |
| } |
| |
| static int bcm2835_wdt_remove(struct platform_device *pdev) |
| { |
| struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); |
| |
| watchdog_unregister_device(&bcm2835_wdt_wdd); |
| iounmap(wdt->base); |
| |
| return 0; |
| } |
| |
| static void bcm2835_wdt_shutdown(struct platform_device *pdev) |
| { |
| bcm2835_wdt_stop(&bcm2835_wdt_wdd); |
| } |
| |
| static const struct of_device_id bcm2835_wdt_of_match[] = { |
| { .compatible = "brcm,bcm2835-pm-wdt", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match); |
| |
| static struct platform_driver bcm2835_wdt_driver = { |
| .probe = bcm2835_wdt_probe, |
| .remove = bcm2835_wdt_remove, |
| .shutdown = bcm2835_wdt_shutdown, |
| .driver = { |
| .name = "bcm2835-wdt", |
| .owner = THIS_MODULE, |
| .of_match_table = bcm2835_wdt_of_match, |
| }, |
| }; |
| module_platform_driver(bcm2835_wdt_driver); |
| |
| module_param(heartbeat, uint, 0); |
| MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); |
| |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); |
| MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer"); |
| MODULE_LICENSE("GPL"); |