Google Git
Sign in
gem5 / arm / linux-arm64-legacy / 149f256f8ca690c28dd8aa9fb8bcdaf2e93b1e1c / . / drivers / usb / serial / iuu_phoenix.c
blob: 99b97c04896f9402b37458106e6e3288c01575bb [file] [log] [blame]
/*
* Infinity Unlimited USB Phoenix driver
*
* Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk)
* Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
*
* Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* And tested with help of WB Electronics
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "iuu_phoenix.h"
#include <linux/random.h>
#ifdef CONFIG_USB_SERIAL_DEBUG
static int debug = 1;
#else
static int debug;
#endif
/*
* Version Information
*/
#define DRIVER_VERSION "v0.12"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
static const struct usb_device_id id_table[] = {
{USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)},
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver iuu_driver = {
.name = "iuu_phoenix",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.no_dynamic_id = 1,
};
/* turbo parameter */
static int boost = 100;
static int clockmode = 1;
static int cdmode = 1;
static int iuu_cardin;
static int iuu_cardout;
static int xmas;
static int vcc_default = 5;
static void read_rxcmd_callback(struct urb *urb);
struct iuu_private {
spinlock_t lock; /* store irq state */
wait_queue_head_t delta_msr_wait;
u8 line_status;
int tiostatus; /* store IUART SIGNAL for tiocmget call */
u8 reset; /* if 1 reset is needed */
int poll; /* number of poll */
u8 *writebuf; /* buffer for writing to device */
int writelen; /* num of byte to write to device */
u8 *buf; /* used for initialize speed */
u8 *dbgbuf; /* debug buffer */
u8 len;
int vcc; /* vcc (either 3 or 5 V) */
u32 baud;
u32 boost;
u32 clk;
};
static void iuu_free_buf(struct iuu_private *priv)
{
kfree(priv->buf);
kfree(priv->dbgbuf);
kfree(priv->writebuf);
}
static int iuu_alloc_buf(struct iuu_private *priv)
{
priv->buf = kzalloc(256, GFP_KERNEL);
priv->dbgbuf = kzalloc(256, GFP_KERNEL);
priv->writebuf = kzalloc(256, GFP_KERNEL);
if (!priv->buf || !priv->dbgbuf || !priv->writebuf) {
iuu_free_buf(priv);
dbg("%s problem allocation buffer", __func__);
return -ENOMEM;
}
dbg("%s - Privates buffers allocation success", __func__);
return 0;
}
static int iuu_startup(struct usb_serial *serial)
{
struct iuu_private *priv;
priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
dbg("%s- priv allocation success", __func__);
if (!priv)
return -ENOMEM;
if (iuu_alloc_buf(priv)) {
kfree(priv);
return -ENOMEM;
}
priv->vcc = vcc_default;
spin_lock_init(&priv->lock);
init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(serial->port[0], priv);
return 0;
}
/* Release function */
static void iuu_release(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct iuu_private *priv = usb_get_serial_port_data(port);
if (!port)
return;
dbg("%s", __func__);
if (priv) {
iuu_free_buf(priv);
dbg("%s - I will free all", __func__);
usb_set_serial_port_data(port, NULL);
dbg("%s - priv is not anymore in port structure", __func__);
kfree(priv);
dbg("%s priv is now kfree", __func__);
}
}
static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
/* FIXME: locking on tiomstatus */
dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__,
port->number, set, clear);
spin_lock_irqsave(&priv->lock, flags);
if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) {
dbg("%s TIOCMSET RESET called !!!", __func__);
priv->reset = 1;
}
if (set & TIOCM_RTS)
priv->tiostatus = TIOCM_RTS;
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
/* This is used to provide a carrier detect mechanism
* When a card is present, the response is 0x00
* When no card , the reader respond with TIOCM_CD
* This is known as CD autodetect mechanism
*/
static int iuu_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
int rc;
spin_lock_irqsave(&priv->lock, flags);
rc = priv->tiostatus;
spin_unlock_irqrestore(&priv->lock, flags);
return rc;
}
static void iuu_rxcmd(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int result;
int status = urb->status;
dbg("%s - enter", __func__);
if (status) {
dbg("%s - status = %d", __func__, status);
/* error stop all */
return;
}
memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, 1,
read_rxcmd_callback, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
}
static int iuu_reset(struct usb_serial_port *port, u8 wt)
{
struct iuu_private *priv = usb_get_serial_port_data(port);
int result;
char *buf_ptr = port->write_urb->transfer_buffer;
dbg("%s - enter", __func__);
/* Prepare the reset sequence */
*buf_ptr++ = IUU_RST_SET;
*buf_ptr++ = IUU_DELAY_MS;
*buf_ptr++ = wt;
*buf_ptr = IUU_RST_CLEAR;
/* send the sequence */
usb_fill_bulk_urb(port->write_urb,
port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, 4, iuu_rxcmd, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
priv->reset = 0;
return result;
}
/* Status Function
* Return value is
* 0x00 = no card
* 0x01 = smartcard
* 0x02 = sim card
*/
static void iuu_update_status_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct iuu_private *priv = usb_get_serial_port_data(port);
u8 *st;
int status = urb->status;
dbg("%s - enter", __func__);
if (status) {
dbg("%s - status = %d", __func__, status);
/* error stop all */
return;
}
st = urb->transfer_buffer;
dbg("%s - enter", __func__);
if (urb->actual_length == 1) {
switch (st[0]) {
case 0x1:
priv->tiostatus = iuu_cardout;
break;
case 0x0:
priv->tiostatus = iuu_cardin;
break;
default:
priv->tiostatus = iuu_cardin;
}
}
iuu_rxcmd(urb);
}
static void iuu_status_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int result;
int status = urb->status;
dbg("%s - status = %d", __func__, status);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, 256,
iuu_update_status_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
}
static int iuu_status(struct usb_serial_port *port)
{
int result;
dbg("%s - enter", __func__);
memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, 1,
iuu_status_callback, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
return result;
}
static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
{
int status;
struct usb_serial *serial = port->serial;
int actual = 0;
dbg("%s - enter", __func__);
/* send the data out the bulk port */
status =
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
count, &actual, HZ * 1);
if (status != IUU_OPERATION_OK)
dbg("%s - error = %2x", __func__, status);
else
dbg("%s - write OK !", __func__);
return status;
}
static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
{
int status;
struct usb_serial *serial = port->serial;
int actual = 0;
dbg("%s - enter", __func__);
/* send the data out the bulk port */
status =
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
count, &actual, HZ * 1);
if (status != IUU_OPERATION_OK)
dbg("%s - error = %2x", __func__, status);
else
dbg("%s - read OK !", __func__);
return status;
}
static int iuu_led(struct usb_serial_port *port, unsigned int R,
unsigned int G, unsigned int B, u8 f)
{
int status;
u8 *buf;
buf = kmalloc(8, GFP_KERNEL);
if (!buf)
return -ENOMEM;
dbg("%s - enter", __func__);
buf[0] = IUU_SET_LED;
buf[1] = R & 0xFF;
buf[2] = (R >> 8) & 0xFF;
buf[3] = G & 0xFF;
buf[4] = (G >> 8) & 0xFF;
buf[5] = B & 0xFF;
buf[6] = (B >> 8) & 0xFF;
buf[7] = f;
status = bulk_immediate(port, buf, 8);
kfree(buf);
if (status != IUU_OPERATION_OK)
dbg("%s - led error status = %2x", __func__, status);
else
dbg("%s - led OK !", __func__);
return IUU_OPERATION_OK;
}
static void iuu_rgbf_fill_buffer(u8 *buf, u8 r1, u8 r2, u8 g1, u8 g2, u8 b1,
u8 b2, u8 freq)
{
*buf++ = IUU_SET_LED;
*buf++ = r1;
*buf++ = r2;
*buf++ = g1;
*buf++ = g2;
*buf++ = b1;
*buf++ = b2;
*buf = freq;
}
static void iuu_led_activity_on(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int result;
char *buf_ptr = port->write_urb->transfer_buffer;
*buf_ptr++ = IUU_SET_LED;
if (xmas == 1) {
get_random_bytes(buf_ptr, 6);
*(buf_ptr+7) = 1;
} else {
iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255);
}
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, 8 ,
iuu_rxcmd, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
}
static void iuu_led_activity_off(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int result;
char *buf_ptr = port->write_urb->transfer_buffer;
if (xmas == 1) {
iuu_rxcmd(urb);
return;
} else {
*buf_ptr++ = IUU_SET_LED;
iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
}
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, 8 ,
iuu_rxcmd, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
}
static int iuu_clk(struct usb_serial_port *port, int dwFrq)
{
int status;
struct iuu_private *priv = usb_get_serial_port_data(port);
int Count = 0;
u8 FrqGenAdr = 0x69;
u8 DIV = 0; /* 8bit */
u8 XDRV = 0; /* 8bit */
u8 PUMP = 0; /* 3bit */
u8 PBmsb = 0; /* 2bit */
u8 PBlsb = 0; /* 8bit */
u8 PO = 0; /* 1bit */
u8 Q = 0; /* 7bit */
/* 24bit = 3bytes */
unsigned int P = 0;
unsigned int P2 = 0;
int frq = (int)dwFrq;
dbg("%s - enter", __func__);
if (frq == 0) {
priv->buf[Count++] = IUU_UART_WRITE_I2C;
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x09;
priv->buf[Count++] = 0x00;
status = bulk_immediate(port, (u8 *) priv->buf, Count);
if (status != 0) {
dbg("%s - write error ", __func__);
return status;
}
} else if (frq == 3579000) {
DIV = 100;
P = 1193;
Q = 40;
XDRV = 0;
} else if (frq == 3680000) {
DIV = 105;
P = 161;
Q = 5;
XDRV = 0;
} else if (frq == 6000000) {
DIV = 66;
P = 66;
Q = 2;
XDRV = 0x28;
} else {
unsigned int result = 0;
unsigned int tmp = 0;
unsigned int check;
unsigned int check2;
char found = 0x00;
unsigned int lQ = 2;
unsigned int lP = 2055;
unsigned int lDiv = 4;
for (lQ = 2; lQ <= 47 && !found; lQ++)
for (lP = 2055; lP >= 8 && !found; lP--)
for (lDiv = 4; lDiv <= 127 && !found; lDiv++) {
tmp = (12000000 / lDiv) * (lP / lQ);
if (abs((int)(tmp - frq)) <
abs((int)(frq - result))) {
check2 = (12000000 / lQ);
if (check2 < 250000)
continue;
check = (12000000 / lQ) * lP;
if (check > 400000000)
continue;
if (check < 100000000)
continue;
if (lDiv < 4 || lDiv > 127)
continue;
result = tmp;
P = lP;
DIV = lDiv;
Q = lQ;
if (result == frq)
found = 0x01;
}
}
}
P2 = ((P - PO) / 2) - 4;
DIV = DIV;
PUMP = 0x04;
PBmsb = (P2 >> 8 & 0x03);
PBlsb = P2 & 0xFF;
PO = (P >> 10) & 0x01;
Q = Q - 2;
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x09;
priv->buf[Count++] = 0x20; /* Adr = 0x09 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x0C;
priv->buf[Count++] = DIV; /* Adr = 0x0C */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x12;
priv->buf[Count++] = XDRV; /* Adr = 0x12 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x13;
priv->buf[Count++] = 0x6B; /* Adr = 0x13 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x40;
priv->buf[Count++] = (0xC0 | ((PUMP & 0x07) << 2)) |
(PBmsb & 0x03); /* Adr = 0x40 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x41;
priv->buf[Count++] = PBlsb; /* Adr = 0x41 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x42;
priv->buf[Count++] = Q | (((PO & 0x01) << 7)); /* Adr = 0x42 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x44;
priv->buf[Count++] = (char)0xFF; /* Adr = 0x44 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x45;
priv->buf[Count++] = (char)0xFE; /* Adr = 0x45 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x46;
priv->buf[Count++] = 0x7F; /* Adr = 0x46 */
priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */
priv->buf[Count++] = FrqGenAdr << 1;
priv->buf[Count++] = 0x47;
priv->buf[Count++] = (char)0x84; /* Adr = 0x47 */
status = bulk_immediate(port, (u8 *) priv->buf, Count);
if (status != IUU_OPERATION_OK)
dbg("%s - write error ", __func__);
return status;
}
static int iuu_uart_flush(struct usb_serial_port *port)
{
int i;
int status;
u8 rxcmd = IUU_UART_RX;
struct iuu_private *priv = usb_get_serial_port_data(port);
dbg("%s - enter", __func__);
if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
return -EIO;
for (i = 0; i < 2; i++) {
status = bulk_immediate(port, &rxcmd, 1);
if (status != IUU_OPERATION_OK) {
dbg("%s - uart_flush_write error", __func__);
return status;
}
status = read_immediate(port, &priv->len, 1);
if (status != IUU_OPERATION_OK) {
dbg("%s - uart_flush_read error", __func__);
return status;
}
if (priv->len > 0) {
dbg("%s - uart_flush datalen is : %i ", __func__,
priv->len);
status = read_immediate(port, priv->buf, priv->len);
if (status != IUU_OPERATION_OK) {
dbg("%s - uart_flush_read error", __func__);
return status;
}
}
}
dbg("%s - uart_flush_read OK!", __func__);
iuu_led(port, 0, 0xF000, 0, 0xFF);
return status;
}
static void read_buf_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
struct tty_struct *tty;
int status = urb->status;
dbg("%s - status = %d", __func__, status);
if (status) {
if (status == -EPROTO) {
/* reschedule needed */
}
return;
}
dbg("%s - %i chars to write", __func__, urb->actual_length);
tty = tty_port_tty_get(&port->port);
if (data == NULL)
dbg("%s - data is NULL !!!", __func__);
if (tty && urb->actual_length && data) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
iuu_led_activity_on(urb);
}
static int iuu_bulk_write(struct usb_serial_port *port)
{
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
int result;
int i;
int buf_len;
char *buf_ptr = port->write_urb->transfer_buffer;
dbg("%s - enter", __func__);
spin_lock_irqsave(&priv->lock, flags);
*buf_ptr++ = IUU_UART_ESC;
*buf_ptr++ = IUU_UART_TX;
*buf_ptr++ = priv->writelen;
memcpy(buf_ptr, priv->writebuf, priv->writelen);
buf_len = priv->writelen;
priv->writelen = 0;
spin_unlock_irqrestore(&priv->lock, flags);
if (debug == 1) {
for (i = 0; i < buf_len; i++)
sprintf(priv->dbgbuf + i*2 ,
"%02X", priv->writebuf[i]);
priv->dbgbuf[buf_len+i*2] = 0;
dbg("%s - writing %i chars : %s", __func__,
buf_len, priv->dbgbuf);
}
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, buf_len + 3,
iuu_rxcmd, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
usb_serial_port_softint(port);
return result;
}
static int iuu_read_buf(struct usb_serial_port *port, int len)
{
int result;
dbg("%s - enter", __func__);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, len,
read_buf_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
return result;
}
static void iuu_uart_read_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
int status = urb->status;
int error = 0;
int len = 0;
unsigned char *data = urb->transfer_buffer;
priv->poll++;
dbg("%s - enter", __func__);
if (status) {
dbg("%s - status = %d", __func__, status);
/* error stop all */
return;
}
if (data == NULL)
dbg("%s - data is NULL !!!", __func__);
if (urb->actual_length == 1 && data != NULL)
len = (int) data[0];
if (urb->actual_length > 1) {
dbg("%s - urb->actual_length = %i", __func__,
urb->actual_length);
error = 1;
return;
}
/* if len > 0 call readbuf */
if (len > 0 && error == 0) {
dbg("%s - call read buf - len to read is %i ",
__func__, len);
status = iuu_read_buf(port, len);
return;
}
/* need to update status ? */
if (priv->poll > 99) {
status = iuu_status(port);
priv->poll = 0;
return;
}
/* reset waiting ? */
if (priv->reset == 1) {
status = iuu_reset(port, 0xC);
return;
}
/* Writebuf is waiting */
spin_lock_irqsave(&priv->lock, flags);
if (priv->writelen > 0) {
spin_unlock_irqrestore(&priv->lock, flags);
status = iuu_bulk_write(port);
return;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* if nothing to write call again rxcmd */
dbg("%s - rxcmd recall", __func__);
iuu_led_activity_off(urb);
}
static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
const u8 *buf, int count)
{
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
dbg("%s - enter", __func__);
if (count > 256)
return -ENOMEM;
spin_lock_irqsave(&priv->lock, flags);
/* fill the buffer */
memcpy(priv->writebuf + priv->writelen, buf, count);
priv->writelen += count;
spin_unlock_irqrestore(&priv->lock, flags);
return count;
}
static void read_rxcmd_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int result;
int status = urb->status;
dbg("%s - status = %d", __func__, status);
if (status) {
/* error stop all */
return;
}
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, 256,
iuu_uart_read_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
dbg("%s - submit result = %d", __func__, result);
}
static int iuu_uart_on(struct usb_serial_port *port)
{
int status;
u8 *buf;
buf = kmalloc(sizeof(u8) * 4, GFP_KERNEL);
if (!buf)
return -ENOMEM;
buf[0] = IUU_UART_ENABLE;
buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
status = bulk_immediate(port, buf, 4);
if (status != IUU_OPERATION_OK) {
dbg("%s - uart_on error", __func__);
goto uart_enable_failed;
}
/* iuu_reset() the card after iuu_uart_on() */
status = iuu_uart_flush(port);
if (status != IUU_OPERATION_OK)
dbg("%s - uart_flush error", __func__);
uart_enable_failed:
kfree(buf);
return status;
}
/* Diables the IUU UART (a.k.a. the Phoenix voiderface) */
static int iuu_uart_off(struct usb_serial_port *port)
{
int status;
u8 *buf;
buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
buf[0] = IUU_UART_DISABLE;
status = bulk_immediate(port, buf, 1);
if (status != IUU_OPERATION_OK)
dbg("%s - uart_off error", __func__);
kfree(buf);
return status;
}
static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
u32 *actual, u8 parity)
{
int status;
u32 baud;
u8 *dataout;
u8 DataCount = 0;
u8 T1Frekvens = 0;
u8 T1reload = 0;
unsigned int T1FrekvensHZ = 0;
dbg("%s - enter baud_base=%d", __func__, baud_base);
dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL);
if (!dataout)
return -ENOMEM;
/*baud = (((priv->clk / 35) * baud_base) / 100000); */
baud = baud_base;
if (baud < 1200 || baud > 230400) {
kfree(dataout);
return IUU_INVALID_PARAMETER;
}
if (baud > 977) {
T1Frekvens = 3;
T1FrekvensHZ = 500000;
}
if (baud > 3906) {
T1Frekvens = 2;
T1FrekvensHZ = 2000000;
}
if (baud > 11718) {
T1Frekvens = 1;
T1FrekvensHZ = 6000000;
}
if (baud > 46875) {
T1Frekvens = 0;
T1FrekvensHZ = 24000000;
}
T1reload = 256 - (u8) (T1FrekvensHZ / (baud * 2));
/* magic number here: ENTER_FIRMWARE_UPDATE; */
dataout[DataCount++] = IUU_UART_ESC;
/* magic number here: CHANGE_BAUD; */
dataout[DataCount++] = IUU_UART_CHANGE;
dataout[DataCount++] = T1Frekvens;
dataout[DataCount++] = T1reload;
*actual = (T1FrekvensHZ / (256 - T1reload)) / 2;
switch (parity & 0x0F) {
case IUU_PARITY_NONE:
dataout[DataCount++] = 0x00;
break;
case IUU_PARITY_EVEN:
dataout[DataCount++] = 0x01;
break;
case IUU_PARITY_ODD:
dataout[DataCount++] = 0x02;
break;
case IUU_PARITY_MARK:
dataout[DataCount++] = 0x03;
break;
case IUU_PARITY_SPACE:
dataout[DataCount++] = 0x04;
break;
default:
kfree(dataout);
return IUU_INVALID_PARAMETER;
break;
}
switch (parity & 0xF0) {
case IUU_ONE_STOP_BIT:
dataout[DataCount - 1] |= IUU_ONE_STOP_BIT;
break;
case IUU_TWO_STOP_BITS:
dataout[DataCount - 1] |= IUU_TWO_STOP_BITS;
break;
default:
kfree(dataout);
return IUU_INVALID_PARAMETER;
break;
}
status = bulk_immediate(port, dataout, DataCount);
if (status != IUU_OPERATION_OK)
dbg("%s - uart_off error", __func__);
kfree(dataout);
return status;
}
static void iuu_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
const u32 supported_mask = CMSPAR|PARENB|PARODD;
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned int cflag = tty->termios->c_cflag;
int status;
u32 actual;
u32 parity;
int csize = CS7;
int baud;
u32 newval = cflag & supported_mask;
/* Just use the ospeed. ispeed should be the same. */
baud = tty->termios->c_ospeed;
dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
/* compute the parity parameter */
parity = 0;
if (cflag & CMSPAR) { /* Using mark space */
if (cflag & PARODD)
parity |= IUU_PARITY_SPACE;
else
parity |= IUU_PARITY_MARK;
} else if (!(cflag & PARENB)) {
parity |= IUU_PARITY_NONE;
csize = CS8;
} else if (cflag & PARODD)
parity |= IUU_PARITY_ODD;
else
parity |= IUU_PARITY_EVEN;
parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
/* set it */
status = iuu_uart_baud(port,
baud * priv->boost / 100,
&actual, parity);
/* set the termios value to the real one, so the user now what has
* changed. We support few fields so its easies to copy the old hw
* settings back over and then adjust them
*/
if (old_termios)
tty_termios_copy_hw(tty->termios, old_termios);
if (status != 0) /* Set failed - return old bits */
return;
/* Re-encode speed, parity and csize */
tty_encode_baud_rate(tty, baud, baud);
tty->termios->c_cflag &= ~(supported_mask|CSIZE);
tty->termios->c_cflag |= newval | csize;
}
static void iuu_close(struct usb_serial_port *port)
{
/* iuu_led (port,255,0,0,0); */
struct usb_serial *serial;
serial = port->serial;
if (!serial)
return;
dbg("%s - port %d", __func__, port->number);
iuu_uart_off(port);
if (serial->dev) {
/* free writebuf */
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
iuu_led(port, 0, 0, 0xF000, 0xFF);
}
}
static void iuu_init_termios(struct tty_struct *tty)
{
dbg("%s - enter", __func__);
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
| TIOCM_CTS | CSTOPB | PARENB;
tty->termios->c_ispeed = 9600;
tty->termios->c_ospeed = 9600;
tty->termios->c_lflag = 0;
tty->termios->c_oflag = 0;
tty->termios->c_iflag = 0;
}
static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
u8 *buf;
int result;
int baud;
u32 actual;
struct iuu_private *priv = usb_get_serial_port_data(port);
baud = tty->termios->c_ospeed;
tty->termios->c_ispeed = baud;
/* Re-encode speed */
tty_encode_baud_rate(tty, baud, baud);
dbg("%s - port %d, baud %d", __func__, port->number, baud);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
buf = kmalloc(10, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
priv->poll = 0;
/* initialize writebuf */
#define FISH(a, b, c, d) do { \
result = usb_control_msg(port->serial->dev, \
usb_rcvctrlpipe(port->serial->dev, 0), \
b, a, c, d, buf, 1, 1000); \
dbg("0x%x:0x%x:0x%x:0x%x %d - %x", a, b, c, d, result, \
buf[0]); } while (0);
#define SOUP(a, b, c, d) do { \
result = usb_control_msg(port->serial->dev, \
usb_sndctrlpipe(port->serial->dev, 0), \
b, a, c, d, NULL, 0, 1000); \
dbg("0x%x:0x%x:0x%x:0x%x %d", a, b, c, d, result); } while (0)
/* This is not UART related but IUU USB driver related or something */
/* like that. Basically no IUU will accept any commands from the USB */
/* host unless it has received the following message */
/* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */
SOUP(0x03, 0x02, 0x02, 0x0);
kfree(buf);
iuu_led(port, 0xF000, 0xF000, 0, 0xFF);
iuu_uart_on(port);
if (boost < 100)
boost = 100;
priv->boost = boost;
priv->baud = baud;
switch (clockmode) {
case 2: /* 3.680 Mhz */
priv->clk = IUU_CLK_3680000;
iuu_clk(port, IUU_CLK_3680000 * boost / 100);
result =
iuu_uart_baud(port, baud * boost / 100, &actual,
IUU_PARITY_EVEN);
break;
case 3: /* 6.00 Mhz */
iuu_clk(port, IUU_CLK_6000000 * boost / 100);
priv->clk = IUU_CLK_6000000;
/* Ratio of 6000000 to 3500000 for baud 9600 */
result =
iuu_uart_baud(port, 16457 * boost / 100, &actual,
IUU_PARITY_EVEN);
break;
default: /* 3.579 Mhz */
iuu_clk(port, IUU_CLK_3579000 * boost / 100);
priv->clk = IUU_CLK_3579000;
result =
iuu_uart_baud(port, baud * boost / 100, &actual,
IUU_PARITY_EVEN);
}
/* set the cardin cardout signals */
switch (cdmode) {
case 0:
iuu_cardin = 0;
iuu_cardout = 0;
break;
case 1:
iuu_cardin = TIOCM_CD;
iuu_cardout = 0;
break;
case 2:
iuu_cardin = 0;
iuu_cardout = TIOCM_CD;
break;
case 3:
iuu_cardin = TIOCM_DSR;
iuu_cardout = 0;
break;
case 4:
iuu_cardin = 0;
iuu_cardout = TIOCM_DSR;
break;
case 5:
iuu_cardin = TIOCM_CTS;
iuu_cardout = 0;
break;
case 6:
iuu_cardin = 0;
iuu_cardout = TIOCM_CTS;
break;
case 7:
iuu_cardin = TIOCM_RNG;
iuu_cardout = 0;
break;
case 8:
iuu_cardin = 0;
iuu_cardout = TIOCM_RNG;
}
iuu_uart_flush(port);
dbg("%s - initialization done", __func__);
memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, 1,
read_rxcmd_callback, port);
result = usb_submit_urb(port->write_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
iuu_close(port);
return -EPROTO;
} else {
dbg("%s - rxcmd OK", __func__);
}
return result;
}
/* how to change VCC */
static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc)
{
int status;
u8 *buf;
buf = kmalloc(5, GFP_KERNEL);
if (!buf)
return -ENOMEM;
dbg("%s - enter", __func__);
buf[0] = IUU_SET_VCC;
buf[1] = vcc & 0xFF;
buf[2] = (vcc >> 8) & 0xFF;
buf[3] = (vcc >> 16) & 0xFF;
buf[4] = (vcc >> 24) & 0xFF;
status = bulk_immediate(port, buf, 5);
kfree(buf);
if (status != IUU_OPERATION_OK)
dbg("%s - vcc error status = %2x", __func__, status);
else
dbg("%s - vcc OK !", __func__);
return status;
}
/*
* Sysfs Attributes
*/
static ssize_t show_vcc_mode(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct iuu_private *priv = usb_get_serial_port_data(port);
return sprintf(buf, "%d\n", priv->vcc);
}
static ssize_t store_vcc_mode(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned long v;
if (strict_strtoul(buf, 10, &v)) {
dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n",
__func__, buf);
goto fail_store_vcc_mode;
}
dbg("%s: setting vcc_mode = %ld", __func__, v);
if ((v != 3) && (v != 5)) {
dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v);
} else {
iuu_vcc_set(port, v);
priv->vcc = v;
}
fail_store_vcc_mode:
return count;
}
static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode,
store_vcc_mode);
static int iuu_create_sysfs_attrs(struct usb_serial_port *port)
{
dbg("%s", __func__);
return device_create_file(&port->dev, &dev_attr_vcc_mode);
}
static int iuu_remove_sysfs_attrs(struct usb_serial_port *port)
{
dbg("%s", __func__);
device_remove_file(&port->dev, &dev_attr_vcc_mode);
return 0;
}
/*
* End Sysfs Attributes
*/
static struct usb_serial_driver iuu_device = {
.driver = {
.owner = THIS_MODULE,
.name = "iuu_phoenix",
},
.id_table = id_table,
.usb_driver = &iuu_driver,
.num_ports = 1,
.bulk_in_size = 512,
.bulk_out_size = 512,
.port_probe = iuu_create_sysfs_attrs,
.port_remove = iuu_remove_sysfs_attrs,
.open = iuu_open,
.close = iuu_close,
.write = iuu_uart_write,
.read_bulk_callback = iuu_uart_read_callback,
.tiocmget = iuu_tiocmget,
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.init_termios = iuu_init_termios,
.attach = iuu_startup,
.release = iuu_release,
};
static int __init iuu_init(void)
{
int retval;
retval = usb_serial_register(&iuu_device);
if (retval)
goto failed_usb_serial_register;
retval = usb_register(&iuu_driver);
if (retval)
goto failed_usb_register;
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&iuu_device);
failed_usb_serial_register:
return retval;
}
static void __exit iuu_exit(void)
{
usb_deregister(&iuu_driver);
usb_serial_deregister(&iuu_device);
}
module_init(iuu_init);
module_exit(iuu_exit);
MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(xmas, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
module_param(boost, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)");
module_param(clockmode, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, "
"3=6 Mhz)");
module_param(cdmode, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, "
"4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)");
module_param(vcc_default, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 "
"for 5V). Default to 5.");