| /* |
| * linux/arch/sh/kernel/irq.c |
| * |
| * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar |
| * |
| * |
| * SuperH version: Copyright (C) 1999 Niibe Yutaka |
| */ |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/seq_file.h> |
| #include <linux/ftrace.h> |
| #include <linux/delay.h> |
| #include <asm/processor.h> |
| #include <asm/machvec.h> |
| #include <asm/uaccess.h> |
| #include <asm/thread_info.h> |
| #include <cpu/mmu_context.h> |
| |
| atomic_t irq_err_count; |
| |
| /* |
| * 'what should we do if we get a hw irq event on an illegal vector'. |
| * each architecture has to answer this themselves, it doesn't deserve |
| * a generic callback i think. |
| */ |
| void ack_bad_irq(unsigned int irq) |
| { |
| atomic_inc(&irq_err_count); |
| printk("unexpected IRQ trap at vector %02x\n", irq); |
| } |
| |
| #if defined(CONFIG_PROC_FS) |
| /* |
| * /proc/interrupts printing for arch specific interrupts |
| */ |
| int arch_show_interrupts(struct seq_file *p, int prec) |
| { |
| int j; |
| |
| seq_printf(p, "%*s: ", prec, "NMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", irq_stat[j].__nmi_count); |
| seq_printf(p, " Non-maskable interrupts\n"); |
| |
| seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_IRQSTACKS |
| /* |
| * per-CPU IRQ handling contexts (thread information and stack) |
| */ |
| union irq_ctx { |
| struct thread_info tinfo; |
| u32 stack[THREAD_SIZE/sizeof(u32)]; |
| }; |
| |
| static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; |
| static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; |
| |
| static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss; |
| static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss; |
| |
| static inline void handle_one_irq(unsigned int irq) |
| { |
| union irq_ctx *curctx, *irqctx; |
| |
| curctx = (union irq_ctx *)current_thread_info(); |
| irqctx = hardirq_ctx[smp_processor_id()]; |
| |
| /* |
| * this is where we switch to the IRQ stack. However, if we are |
| * already using the IRQ stack (because we interrupted a hardirq |
| * handler) we can't do that and just have to keep using the |
| * current stack (which is the irq stack already after all) |
| */ |
| if (curctx != irqctx) { |
| u32 *isp; |
| |
| isp = (u32 *)((char *)irqctx + sizeof(*irqctx)); |
| irqctx->tinfo.task = curctx->tinfo.task; |
| irqctx->tinfo.previous_sp = current_stack_pointer; |
| |
| /* |
| * Copy the softirq bits in preempt_count so that the |
| * softirq checks work in the hardirq context. |
| */ |
| irqctx->tinfo.preempt_count = |
| (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | |
| (curctx->tinfo.preempt_count & SOFTIRQ_MASK); |
| |
| __asm__ __volatile__ ( |
| "mov %0, r4 \n" |
| "mov r15, r8 \n" |
| "jsr @%1 \n" |
| /* swith to the irq stack */ |
| " mov %2, r15 \n" |
| /* restore the stack (ring zero) */ |
| "mov r8, r15 \n" |
| : /* no outputs */ |
| : "r" (irq), "r" (generic_handle_irq), "r" (isp) |
| : "memory", "r0", "r1", "r2", "r3", "r4", |
| "r5", "r6", "r7", "r8", "t", "pr" |
| ); |
| } else |
| generic_handle_irq(irq); |
| } |
| |
| /* |
| * allocate per-cpu stacks for hardirq and for softirq processing |
| */ |
| void irq_ctx_init(int cpu) |
| { |
| union irq_ctx *irqctx; |
| |
| if (hardirq_ctx[cpu]) |
| return; |
| |
| irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE]; |
| irqctx->tinfo.task = NULL; |
| irqctx->tinfo.exec_domain = NULL; |
| irqctx->tinfo.cpu = cpu; |
| irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); |
| |
| hardirq_ctx[cpu] = irqctx; |
| |
| irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE]; |
| irqctx->tinfo.task = NULL; |
| irqctx->tinfo.exec_domain = NULL; |
| irqctx->tinfo.cpu = cpu; |
| irqctx->tinfo.preempt_count = 0; |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); |
| |
| softirq_ctx[cpu] = irqctx; |
| |
| printk("CPU %u irqstacks, hard=%p soft=%p\n", |
| cpu, hardirq_ctx[cpu], softirq_ctx[cpu]); |
| } |
| |
| void irq_ctx_exit(int cpu) |
| { |
| hardirq_ctx[cpu] = NULL; |
| } |
| |
| asmlinkage void do_softirq(void) |
| { |
| unsigned long flags; |
| struct thread_info *curctx; |
| union irq_ctx *irqctx; |
| u32 *isp; |
| |
| if (in_interrupt()) |
| return; |
| |
| local_irq_save(flags); |
| |
| if (local_softirq_pending()) { |
| curctx = current_thread_info(); |
| irqctx = softirq_ctx[smp_processor_id()]; |
| irqctx->tinfo.task = curctx->task; |
| irqctx->tinfo.previous_sp = current_stack_pointer; |
| |
| /* build the stack frame on the softirq stack */ |
| isp = (u32 *)((char *)irqctx + sizeof(*irqctx)); |
| |
| __asm__ __volatile__ ( |
| "mov r15, r9 \n" |
| "jsr @%0 \n" |
| /* switch to the softirq stack */ |
| " mov %1, r15 \n" |
| /* restore the thread stack */ |
| "mov r9, r15 \n" |
| : /* no outputs */ |
| : "r" (__do_softirq), "r" (isp) |
| : "memory", "r0", "r1", "r2", "r3", "r4", |
| "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr" |
| ); |
| |
| /* |
| * Shouldn't happen, we returned above if in_interrupt(): |
| */ |
| WARN_ON_ONCE(softirq_count()); |
| } |
| |
| local_irq_restore(flags); |
| } |
| #else |
| static inline void handle_one_irq(unsigned int irq) |
| { |
| generic_handle_irq(irq); |
| } |
| #endif |
| |
| asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs = set_irq_regs(regs); |
| |
| irq_enter(); |
| |
| irq = irq_demux(irq_lookup(irq)); |
| |
| if (irq != NO_IRQ_IGNORE) { |
| handle_one_irq(irq); |
| irq_finish(irq); |
| } |
| |
| irq_exit(); |
| |
| set_irq_regs(old_regs); |
| |
| return IRQ_HANDLED; |
| } |
| |
| void __init init_IRQ(void) |
| { |
| plat_irq_setup(); |
| |
| /* Perform the machine specific initialisation */ |
| if (sh_mv.mv_init_irq) |
| sh_mv.mv_init_irq(); |
| |
| intc_finalize(); |
| |
| irq_ctx_init(smp_processor_id()); |
| } |
| |
| #ifdef CONFIG_SPARSE_IRQ |
| int __init arch_probe_nr_irqs(void) |
| { |
| nr_irqs = sh_mv.mv_nr_irqs; |
| return NR_IRQS_LEGACY; |
| } |
| #endif |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| static void route_irq(struct irq_data *data, unsigned int irq, unsigned int cpu) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| struct irq_chip *chip = irq_data_get_irq_chip(data); |
| |
| printk(KERN_INFO "IRQ%u: moving from cpu%u to cpu%u\n", |
| irq, data->node, cpu); |
| |
| raw_spin_lock_irq(&desc->lock); |
| chip->irq_set_affinity(data, cpumask_of(cpu), false); |
| raw_spin_unlock_irq(&desc->lock); |
| } |
| |
| /* |
| * The CPU has been marked offline. Migrate IRQs off this CPU. If |
| * the affinity settings do not allow other CPUs, force them onto any |
| * available CPU. |
| */ |
| void migrate_irqs(void) |
| { |
| unsigned int irq, cpu = smp_processor_id(); |
| |
| for_each_active_irq(irq) { |
| struct irq_data *data = irq_get_irq_data(irq); |
| |
| if (data->node == cpu) { |
| unsigned int newcpu = cpumask_any_and(data->affinity, |
| cpu_online_mask); |
| if (newcpu >= nr_cpu_ids) { |
| if (printk_ratelimit()) |
| printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", |
| irq, cpu); |
| |
| cpumask_setall(data->affinity); |
| newcpu = cpumask_any_and(data->affinity, |
| cpu_online_mask); |
| } |
| |
| route_irq(data, irq, newcpu); |
| } |
| } |
| } |
| #endif |