| /* cpudata.h: Per-cpu parameters. |
| * |
| * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net) |
| */ |
| |
| #ifndef _SPARC64_CPUDATA_H |
| #define _SPARC64_CPUDATA_H |
| |
| #include <asm/hypervisor.h> |
| #include <asm/asi.h> |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/percpu.h> |
| #include <linux/threads.h> |
| |
| typedef struct { |
| /* Dcache line 1 */ |
| unsigned int __softirq_pending; /* must be 1st, see rtrap.S */ |
| unsigned int multiplier; |
| unsigned int counter; |
| unsigned int idle_volume; |
| unsigned long clock_tick; /* %tick's per second */ |
| unsigned long udelay_val; |
| |
| /* Dcache line 2, rarely used */ |
| unsigned int dcache_size; |
| unsigned int dcache_line_size; |
| unsigned int icache_size; |
| unsigned int icache_line_size; |
| unsigned int ecache_size; |
| unsigned int ecache_line_size; |
| unsigned int __pad3; |
| unsigned int __pad4; |
| } cpuinfo_sparc; |
| |
| DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); |
| #define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) |
| #define local_cpu_data() __get_cpu_var(__cpu_data) |
| |
| /* Trap handling code needs to get at a few critical values upon |
| * trap entry and to process TSB misses. These cannot be in the |
| * per_cpu() area as we really need to lock them into the TLB and |
| * thus make them part of the main kernel image. As a result we |
| * try to make this as small as possible. |
| * |
| * This is padded out and aligned to 64-bytes to avoid false sharing |
| * on SMP. |
| */ |
| |
| /* If you modify the size of this structure, please update |
| * TRAP_BLOCK_SZ_SHIFT below. |
| */ |
| struct thread_info; |
| struct trap_per_cpu { |
| /* D-cache line 1: Basic thread information, cpu and device mondo queues */ |
| struct thread_info *thread; |
| unsigned long pgd_paddr; |
| unsigned long cpu_mondo_pa; |
| unsigned long dev_mondo_pa; |
| |
| /* D-cache line 2: Error Mondo Queue and kernel buffer pointers */ |
| unsigned long resum_mondo_pa; |
| unsigned long resum_kernel_buf_pa; |
| unsigned long nonresum_mondo_pa; |
| unsigned long nonresum_kernel_buf_pa; |
| |
| /* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */ |
| struct hv_fault_status fault_info; |
| |
| /* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */ |
| unsigned long cpu_mondo_block_pa; |
| unsigned long cpu_list_pa; |
| unsigned long __pad1[2]; |
| |
| /* Dcache line 8: Unused, needed to keep trap_block a power-of-2 in size. */ |
| unsigned long __pad2[4]; |
| } __attribute__((aligned(64))); |
| extern struct trap_per_cpu trap_block[NR_CPUS]; |
| extern void init_cur_cpu_trap(void); |
| extern void setup_tba(void); |
| |
| #ifdef CONFIG_SMP |
| struct cpuid_patch_entry { |
| unsigned int addr; |
| unsigned int cheetah_safari[4]; |
| unsigned int cheetah_jbus[4]; |
| unsigned int starfire[4]; |
| unsigned int sun4v[4]; |
| }; |
| extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end; |
| #endif |
| |
| struct sun4v_1insn_patch_entry { |
| unsigned int addr; |
| unsigned int insn; |
| }; |
| extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch, |
| __sun4v_1insn_patch_end; |
| |
| struct sun4v_2insn_patch_entry { |
| unsigned int addr; |
| unsigned int insns[2]; |
| }; |
| extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch, |
| __sun4v_2insn_patch_end; |
| |
| #endif /* !(__ASSEMBLY__) */ |
| |
| #define TRAP_PER_CPU_THREAD 0x00 |
| #define TRAP_PER_CPU_PGD_PADDR 0x08 |
| #define TRAP_PER_CPU_CPU_MONDO_PA 0x10 |
| #define TRAP_PER_CPU_DEV_MONDO_PA 0x18 |
| #define TRAP_PER_CPU_RESUM_MONDO_PA 0x20 |
| #define TRAP_PER_CPU_RESUM_KBUF_PA 0x28 |
| #define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30 |
| #define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38 |
| #define TRAP_PER_CPU_FAULT_INFO 0x40 |
| #define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0 |
| #define TRAP_PER_CPU_CPU_LIST_PA 0xc8 |
| |
| #define TRAP_BLOCK_SZ_SHIFT 8 |
| |
| #include <asm/scratchpad.h> |
| |
| #ifdef CONFIG_SMP |
| |
| #define __GET_CPUID(REG) \ |
| /* Spitfire implementation (default). */ \ |
| 661: ldxa [%g0] ASI_UPA_CONFIG, REG; \ |
| srlx REG, 17, REG; \ |
| and REG, 0x1f, REG; \ |
| nop; \ |
| .section .cpuid_patch, "ax"; \ |
| /* Instruction location. */ \ |
| .word 661b; \ |
| /* Cheetah Safari implementation. */ \ |
| ldxa [%g0] ASI_SAFARI_CONFIG, REG; \ |
| srlx REG, 17, REG; \ |
| and REG, 0x3ff, REG; \ |
| nop; \ |
| /* Cheetah JBUS implementation. */ \ |
| ldxa [%g0] ASI_JBUS_CONFIG, REG; \ |
| srlx REG, 17, REG; \ |
| and REG, 0x1f, REG; \ |
| nop; \ |
| /* Starfire implementation. */ \ |
| sethi %hi(0x1fff40000d0 >> 9), REG; \ |
| sllx REG, 9, REG; \ |
| or REG, 0xd0, REG; \ |
| lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\ |
| /* sun4v implementation. */ \ |
| mov SCRATCHPAD_CPUID, REG; \ |
| ldxa [REG] ASI_SCRATCHPAD, REG; \ |
| nop; \ |
| nop; \ |
| .previous; |
| |
| #define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ |
| __GET_CPUID(TMP) \ |
| sethi %hi(trap_block), DEST; \ |
| sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \ |
| or DEST, %lo(trap_block), DEST; \ |
| add DEST, TMP, DEST; \ |
| |
| /* Clobbers TMP, current address space PGD phys address into DEST. */ |
| #define TRAP_LOAD_PGD_PHYS(DEST, TMP) \ |
| TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ |
| ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST; |
| |
| /* Clobbers TMP, loads local processor's IRQ work area into DEST. */ |
| #define TRAP_LOAD_IRQ_WORK(DEST, TMP) \ |
| __GET_CPUID(TMP) \ |
| sethi %hi(__irq_work), DEST; \ |
| sllx TMP, 6, TMP; \ |
| or DEST, %lo(__irq_work), DEST; \ |
| add DEST, TMP, DEST; |
| |
| /* Clobbers TMP, loads DEST with current thread info pointer. */ |
| #define TRAP_LOAD_THREAD_REG(DEST, TMP) \ |
| TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ |
| ldx [DEST + TRAP_PER_CPU_THREAD], DEST; |
| |
| /* Given the current thread info pointer in THR, load the per-cpu |
| * area base of the current processor into DEST. REG1, REG2, and REG3 are |
| * clobbered. |
| * |
| * You absolutely cannot use DEST as a temporary in this code. The |
| * reason is that traps can happen during execution, and return from |
| * trap will load the fully resolved DEST per-cpu base. This can corrupt |
| * the calculations done by the macro mid-stream. |
| */ |
| #define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \ |
| ldub [THR + TI_CPU], REG1; \ |
| sethi %hi(__per_cpu_shift), REG3; \ |
| sethi %hi(__per_cpu_base), REG2; \ |
| ldx [REG3 + %lo(__per_cpu_shift)], REG3; \ |
| ldx [REG2 + %lo(__per_cpu_base)], REG2; \ |
| sllx REG1, REG3, REG3; \ |
| add REG3, REG2, DEST; |
| |
| #else |
| |
| #define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ |
| sethi %hi(trap_block), DEST; \ |
| or DEST, %lo(trap_block), DEST; \ |
| |
| /* Uniprocessor versions, we know the cpuid is zero. */ |
| #define TRAP_LOAD_PGD_PHYS(DEST, TMP) \ |
| TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ |
| ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST; |
| |
| #define TRAP_LOAD_IRQ_WORK(DEST, TMP) \ |
| sethi %hi(__irq_work), DEST; \ |
| or DEST, %lo(__irq_work), DEST; |
| |
| #define TRAP_LOAD_THREAD_REG(DEST, TMP) \ |
| TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ |
| ldx [DEST + TRAP_PER_CPU_THREAD], DEST; |
| |
| /* No per-cpu areas on uniprocessor, so no need to load DEST. */ |
| #define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) |
| |
| #endif /* !(CONFIG_SMP) */ |
| |
| #endif /* _SPARC64_CPUDATA_H */ |