|  | /* $Id: bbc_i2c.c,v 1.2 2001/04/02 09:59:08 davem Exp $ | 
|  | * bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III | 
|  | *            platforms. | 
|  | * | 
|  | * Copyright (C) 2001 David S. Miller (davem@redhat.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <asm/oplib.h> | 
|  | #include <asm/ebus.h> | 
|  | #include <asm/spitfire.h> | 
|  | #include <asm/bbc.h> | 
|  |  | 
|  | #include "bbc_i2c.h" | 
|  |  | 
|  | /* Convert this driver to use i2c bus layer someday... */ | 
|  | #define I2C_PCF_PIN	0x80 | 
|  | #define I2C_PCF_ESO	0x40 | 
|  | #define I2C_PCF_ES1	0x20 | 
|  | #define I2C_PCF_ES2	0x10 | 
|  | #define I2C_PCF_ENI	0x08 | 
|  | #define I2C_PCF_STA	0x04 | 
|  | #define I2C_PCF_STO	0x02 | 
|  | #define I2C_PCF_ACK	0x01 | 
|  |  | 
|  | #define I2C_PCF_START    (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK) | 
|  | #define I2C_PCF_STOP     (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK) | 
|  | #define I2C_PCF_REPSTART (              I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK) | 
|  | #define I2C_PCF_IDLE     (I2C_PCF_PIN | I2C_PCF_ESO               | I2C_PCF_ACK) | 
|  |  | 
|  | #define I2C_PCF_INI 0x40   /* 1 if not initialized */ | 
|  | #define I2C_PCF_STS 0x20 | 
|  | #define I2C_PCF_BER 0x10 | 
|  | #define I2C_PCF_AD0 0x08 | 
|  | #define I2C_PCF_LRB 0x08 | 
|  | #define I2C_PCF_AAS 0x04 | 
|  | #define I2C_PCF_LAB 0x02 | 
|  | #define I2C_PCF_BB  0x01 | 
|  |  | 
|  | /* The BBC devices have two I2C controllers.  The first I2C controller | 
|  | * connects mainly to configuration proms (NVRAM, cpu configuration, | 
|  | * dimm types, etc.).  Whereas the second I2C controller connects to | 
|  | * environmental control devices such as fans and temperature sensors. | 
|  | * The second controller also connects to the smartcard reader, if present. | 
|  | */ | 
|  |  | 
|  | #define NUM_CHILDREN	8 | 
|  | struct bbc_i2c_bus { | 
|  | struct bbc_i2c_bus		*next; | 
|  | int				index; | 
|  | spinlock_t			lock; | 
|  | void				__iomem *i2c_bussel_reg; | 
|  | void				__iomem *i2c_control_regs; | 
|  | unsigned char			own, clock; | 
|  |  | 
|  | wait_queue_head_t		wq; | 
|  | volatile int			waiting; | 
|  |  | 
|  | struct linux_ebus_device	*bus_edev; | 
|  | struct { | 
|  | struct linux_ebus_child	*device; | 
|  | int			client_claimed; | 
|  | } devs[NUM_CHILDREN]; | 
|  | }; | 
|  |  | 
|  | static struct bbc_i2c_bus *all_bbc_i2c; | 
|  |  | 
|  | struct bbc_i2c_client { | 
|  | struct bbc_i2c_bus	*bp; | 
|  | struct linux_ebus_child	*echild; | 
|  | int			bus; | 
|  | int			address; | 
|  | }; | 
|  |  | 
|  | static int find_device(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < NUM_CHILDREN; i++) { | 
|  | if (bp->devs[i].device == echild) { | 
|  | if (bp->devs[i].client_claimed) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild, int val) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < NUM_CHILDREN; i++) { | 
|  | if (bp->devs[i].device == echild) { | 
|  | bp->devs[i].client_claimed = val; | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #define claim_device(BP,ECHILD)		set_device_claimage(BP,ECHILD,1) | 
|  | #define release_device(BP,ECHILD)	set_device_claimage(BP,ECHILD,0) | 
|  |  | 
|  | static struct bbc_i2c_bus *find_bus_for_device(struct linux_ebus_child *echild) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = all_bbc_i2c; | 
|  |  | 
|  | while (bp != NULL) { | 
|  | if (find_device(bp, echild) != 0) | 
|  | break; | 
|  | bp = bp->next; | 
|  | } | 
|  |  | 
|  | return bp; | 
|  | } | 
|  |  | 
|  | struct linux_ebus_child *bbc_i2c_getdev(int index) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = all_bbc_i2c; | 
|  | struct linux_ebus_child *echild = NULL; | 
|  | int curidx = 0; | 
|  |  | 
|  | while (bp != NULL) { | 
|  | struct bbc_i2c_bus *next = bp->next; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < NUM_CHILDREN; i++) { | 
|  | if (!(echild = bp->devs[i].device)) | 
|  | break; | 
|  | if (curidx == index) | 
|  | goto out; | 
|  | echild = NULL; | 
|  | curidx++; | 
|  | } | 
|  | bp = next; | 
|  | } | 
|  | out: | 
|  | if (curidx == index) | 
|  | return echild; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = find_bus_for_device(echild); | 
|  | struct bbc_i2c_client *client; | 
|  |  | 
|  | if (!bp) | 
|  | return NULL; | 
|  | client = kmalloc(sizeof(*client), GFP_KERNEL); | 
|  | if (!client) | 
|  | return NULL; | 
|  | memset(client, 0, sizeof(*client)); | 
|  | client->bp = bp; | 
|  | client->echild = echild; | 
|  | client->bus = echild->resource[0].start; | 
|  | client->address = echild->resource[1].start; | 
|  |  | 
|  | claim_device(bp, echild); | 
|  |  | 
|  | return client; | 
|  | } | 
|  |  | 
|  | void bbc_i2c_detach(struct bbc_i2c_client *client) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = client->bp; | 
|  | struct linux_ebus_child *echild = client->echild; | 
|  |  | 
|  | release_device(bp, echild); | 
|  | kfree(client); | 
|  | } | 
|  |  | 
|  | static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) | 
|  | { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  | int limit = 32; | 
|  | int ret = 1; | 
|  |  | 
|  | bp->waiting = 1; | 
|  | add_wait_queue(&bp->wq, &wait); | 
|  | while (limit-- > 0) { | 
|  | u8 val; | 
|  |  | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | *status = val = readb(bp->i2c_control_regs + 0); | 
|  | if ((val & I2C_PCF_PIN) == 0) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | msleep_interruptible(250); | 
|  | } | 
|  | remove_wait_queue(&bp->wq, &wait); | 
|  | bp->waiting = 0; | 
|  | current->state = TASK_RUNNING; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = client->bp; | 
|  | int address = client->address; | 
|  | u8 status; | 
|  | int ret = -1; | 
|  |  | 
|  | if (bp->i2c_bussel_reg != NULL) | 
|  | writeb(client->bus, bp->i2c_bussel_reg); | 
|  |  | 
|  | writeb(address, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | writeb(off, bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status) || | 
|  | (status & I2C_PCF_LRB) != 0) | 
|  | goto out; | 
|  |  | 
|  | writeb(val, bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | out: | 
|  | writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = client->bp; | 
|  | unsigned char address = client->address, status; | 
|  | int ret = -1; | 
|  |  | 
|  | if (bp->i2c_bussel_reg != NULL) | 
|  | writeb(client->bus, bp->i2c_bussel_reg); | 
|  |  | 
|  | writeb(address, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | writeb(off, bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status) || | 
|  | (status & I2C_PCF_LRB) != 0) | 
|  | goto out; | 
|  |  | 
|  | writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | 
|  |  | 
|  | address |= 0x1; /* READ */ | 
|  |  | 
|  | writeb(address, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | /* Set PIN back to one so the device sends the first | 
|  | * byte. | 
|  | */ | 
|  | (void) readb(bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0); | 
|  | *byte = readb(bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | out: | 
|  | writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | 
|  | (void) readb(bp->i2c_control_regs + 0x1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_write_buf(struct bbc_i2c_client *client, | 
|  | char *buf, int len, int off) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | while (len > 0) { | 
|  | int err = bbc_i2c_writeb(client, *buf, off); | 
|  |  | 
|  | if (err < 0) { | 
|  | ret = err; | 
|  | break; | 
|  | } | 
|  |  | 
|  | len--; | 
|  | buf++; | 
|  | off++; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_read_buf(struct bbc_i2c_client *client, | 
|  | char *buf, int len, int off) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | while (len > 0) { | 
|  | int err = bbc_i2c_readb(client, buf, off); | 
|  | if (err < 0) { | 
|  | ret = err; | 
|  | break; | 
|  | } | 
|  | len--; | 
|  | buf++; | 
|  | off++; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(bbc_i2c_getdev); | 
|  | EXPORT_SYMBOL(bbc_i2c_attach); | 
|  | EXPORT_SYMBOL(bbc_i2c_detach); | 
|  | EXPORT_SYMBOL(bbc_i2c_writeb); | 
|  | EXPORT_SYMBOL(bbc_i2c_readb); | 
|  | EXPORT_SYMBOL(bbc_i2c_write_buf); | 
|  | EXPORT_SYMBOL(bbc_i2c_read_buf); | 
|  |  | 
|  | static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id, struct pt_regs *regs) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = dev_id; | 
|  |  | 
|  | /* PIN going from set to clear is the only event which | 
|  | * makes the i2c assert an interrupt. | 
|  | */ | 
|  | if (bp->waiting && | 
|  | !(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN)) | 
|  | wake_up(&bp->wq); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void __init reset_one_i2c(struct bbc_i2c_bus *bp) | 
|  | { | 
|  | writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); | 
|  | writeb(bp->own, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); | 
|  | writeb(bp->clock, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0); | 
|  | } | 
|  |  | 
|  | static int __init attach_one_i2c(struct linux_ebus_device *edev, int index) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = kmalloc(sizeof(*bp), GFP_KERNEL); | 
|  | struct linux_ebus_child *echild; | 
|  | int entry; | 
|  |  | 
|  | if (!bp) | 
|  | return -ENOMEM; | 
|  | memset(bp, 0, sizeof(*bp)); | 
|  |  | 
|  | bp->i2c_control_regs = ioremap(edev->resource[0].start, 0x2); | 
|  | if (!bp->i2c_control_regs) | 
|  | goto fail; | 
|  |  | 
|  | if (edev->num_addrs == 2) { | 
|  | bp->i2c_bussel_reg = ioremap(edev->resource[1].start, 0x1); | 
|  | if (!bp->i2c_bussel_reg) | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | bp->waiting = 0; | 
|  | init_waitqueue_head(&bp->wq); | 
|  | if (request_irq(edev->irqs[0], bbc_i2c_interrupt, | 
|  | SA_SHIRQ, "bbc_i2c", bp)) | 
|  | goto fail; | 
|  |  | 
|  | bp->index = index; | 
|  | bp->bus_edev = edev; | 
|  |  | 
|  | spin_lock_init(&bp->lock); | 
|  | bp->next = all_bbc_i2c; | 
|  | all_bbc_i2c = bp; | 
|  |  | 
|  | entry = 0; | 
|  | for (echild = edev->children; | 
|  | echild && entry < 8; | 
|  | echild = echild->next, entry++) { | 
|  | bp->devs[entry].device = echild; | 
|  | bp->devs[entry].client_claimed = 0; | 
|  | } | 
|  |  | 
|  | writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); | 
|  | bp->own = readb(bp->i2c_control_regs + 0x01); | 
|  | writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); | 
|  | bp->clock = readb(bp->i2c_control_regs + 0x01); | 
|  |  | 
|  | printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n", | 
|  | bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock); | 
|  |  | 
|  | reset_one_i2c(bp); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | if (bp->i2c_bussel_reg) | 
|  | iounmap(bp->i2c_bussel_reg); | 
|  | if (bp->i2c_control_regs) | 
|  | iounmap(bp->i2c_control_regs); | 
|  | kfree(bp); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int __init bbc_present(void) | 
|  | { | 
|  | struct linux_ebus *ebus = NULL; | 
|  | struct linux_ebus_device *edev = NULL; | 
|  |  | 
|  | for_each_ebus(ebus) { | 
|  | for_each_ebusdev(edev, ebus) { | 
|  | if (!strcmp(edev->prom_name, "bbc")) | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | extern int bbc_envctrl_init(void); | 
|  | extern void bbc_envctrl_cleanup(void); | 
|  | static void bbc_i2c_cleanup(void); | 
|  |  | 
|  | static int __init bbc_i2c_init(void) | 
|  | { | 
|  | struct linux_ebus *ebus = NULL; | 
|  | struct linux_ebus_device *edev = NULL; | 
|  | int err, index = 0; | 
|  |  | 
|  | if (tlb_type != cheetah || !bbc_present()) | 
|  | return -ENODEV; | 
|  |  | 
|  | for_each_ebus(ebus) { | 
|  | for_each_ebusdev(edev, ebus) { | 
|  | if (!strcmp(edev->prom_name, "i2c")) { | 
|  | if (!attach_one_i2c(edev, index)) | 
|  | index++; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!index) | 
|  | return -ENODEV; | 
|  |  | 
|  | err = bbc_envctrl_init(); | 
|  | if (err) | 
|  | bbc_i2c_cleanup(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void bbc_i2c_cleanup(void) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = all_bbc_i2c; | 
|  |  | 
|  | bbc_envctrl_cleanup(); | 
|  |  | 
|  | while (bp != NULL) { | 
|  | struct bbc_i2c_bus *next = bp->next; | 
|  |  | 
|  | free_irq(bp->bus_edev->irqs[0], bp); | 
|  |  | 
|  | if (bp->i2c_bussel_reg) | 
|  | iounmap(bp->i2c_bussel_reg); | 
|  | if (bp->i2c_control_regs) | 
|  | iounmap(bp->i2c_control_regs); | 
|  |  | 
|  | kfree(bp); | 
|  |  | 
|  | bp = next; | 
|  | } | 
|  | all_bbc_i2c = NULL; | 
|  | } | 
|  |  | 
|  | module_init(bbc_i2c_init); | 
|  | module_exit(bbc_i2c_cleanup); |