| /* |
| * Procedures for maintaining information about logical memory blocks. |
| * |
| * Peter Bergner, IBM Corp. June 2001. |
| * Copyright (C) 2001 Peter Bergner. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/poison.h> |
| #include <linux/pfn.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/memblock.h> |
| |
| struct memblock memblock __initdata_memblock; |
| |
| int memblock_debug __initdata_memblock; |
| int memblock_can_resize __initdata_memblock; |
| static struct memblock_region memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS + 1] __initdata_memblock; |
| static struct memblock_region memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS + 1] __initdata_memblock; |
| |
| /* inline so we don't get a warning when pr_debug is compiled out */ |
| static inline const char *memblock_type_name(struct memblock_type *type) |
| { |
| if (type == &memblock.memory) |
| return "memory"; |
| else if (type == &memblock.reserved) |
| return "reserved"; |
| else |
| return "unknown"; |
| } |
| |
| /* |
| * Address comparison utilities |
| */ |
| static unsigned long __init_memblock memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1, |
| phys_addr_t base2, phys_addr_t size2) |
| { |
| return ((base1 < (base2 + size2)) && (base2 < (base1 + size1))); |
| } |
| |
| long __init_memblock memblock_overlaps_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size) |
| { |
| unsigned long i; |
| |
| for (i = 0; i < type->cnt; i++) { |
| phys_addr_t rgnbase = type->regions[i].base; |
| phys_addr_t rgnsize = type->regions[i].size; |
| if (memblock_addrs_overlap(base, size, rgnbase, rgnsize)) |
| break; |
| } |
| |
| return (i < type->cnt) ? i : -1; |
| } |
| |
| /* |
| * Find, allocate, deallocate or reserve unreserved regions. All allocations |
| * are top-down. |
| */ |
| |
| static phys_addr_t __init_memblock memblock_find_region(phys_addr_t start, phys_addr_t end, |
| phys_addr_t size, phys_addr_t align) |
| { |
| phys_addr_t base, res_base; |
| long j; |
| |
| /* In case, huge size is requested */ |
| if (end < size) |
| return 0; |
| |
| base = round_down(end - size, align); |
| |
| /* Prevent allocations returning 0 as it's also used to |
| * indicate an allocation failure |
| */ |
| if (start == 0) |
| start = PAGE_SIZE; |
| |
| while (start <= base) { |
| j = memblock_overlaps_region(&memblock.reserved, base, size); |
| if (j < 0) |
| return base; |
| res_base = memblock.reserved.regions[j].base; |
| if (res_base < size) |
| break; |
| base = round_down(res_base - size, align); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Find a free area with specified alignment in a specific range. |
| */ |
| phys_addr_t __init_memblock memblock_find_in_range(phys_addr_t start, phys_addr_t end, |
| phys_addr_t size, phys_addr_t align) |
| { |
| long i; |
| |
| BUG_ON(0 == size); |
| |
| /* Pump up max_addr */ |
| if (end == MEMBLOCK_ALLOC_ACCESSIBLE) |
| end = memblock.current_limit; |
| |
| /* We do a top-down search, this tends to limit memory |
| * fragmentation by keeping early boot allocs near the |
| * top of memory |
| */ |
| for (i = memblock.memory.cnt - 1; i >= 0; i--) { |
| phys_addr_t memblockbase = memblock.memory.regions[i].base; |
| phys_addr_t memblocksize = memblock.memory.regions[i].size; |
| phys_addr_t bottom, top, found; |
| |
| if (memblocksize < size) |
| continue; |
| if ((memblockbase + memblocksize) <= start) |
| break; |
| bottom = max(memblockbase, start); |
| top = min(memblockbase + memblocksize, end); |
| if (bottom >= top) |
| continue; |
| found = memblock_find_region(bottom, top, size, align); |
| if (found) |
| return found; |
| } |
| return 0; |
| } |
| |
| /* |
| * Free memblock.reserved.regions |
| */ |
| int __init_memblock memblock_free_reserved_regions(void) |
| { |
| if (memblock.reserved.regions == memblock_reserved_init_regions) |
| return 0; |
| |
| return memblock_free(__pa(memblock.reserved.regions), |
| sizeof(struct memblock_region) * memblock.reserved.max); |
| } |
| |
| /* |
| * Reserve memblock.reserved.regions |
| */ |
| int __init_memblock memblock_reserve_reserved_regions(void) |
| { |
| if (memblock.reserved.regions == memblock_reserved_init_regions) |
| return 0; |
| |
| return memblock_reserve(__pa(memblock.reserved.regions), |
| sizeof(struct memblock_region) * memblock.reserved.max); |
| } |
| |
| static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r) |
| { |
| memmove(&type->regions[r], &type->regions[r + 1], |
| (type->cnt - (r + 1)) * sizeof(type->regions[r])); |
| type->cnt--; |
| |
| /* Special case for empty arrays */ |
| if (type->cnt == 0) { |
| type->cnt = 1; |
| type->regions[0].base = 0; |
| type->regions[0].size = 0; |
| memblock_set_region_node(&type->regions[0], MAX_NUMNODES); |
| } |
| } |
| |
| /* Defined below but needed now */ |
| static long memblock_add_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size); |
| |
| static int __init_memblock memblock_double_array(struct memblock_type *type) |
| { |
| struct memblock_region *new_array, *old_array; |
| phys_addr_t old_size, new_size, addr; |
| int use_slab = slab_is_available(); |
| |
| /* We don't allow resizing until we know about the reserved regions |
| * of memory that aren't suitable for allocation |
| */ |
| if (!memblock_can_resize) |
| return -1; |
| |
| /* Calculate new doubled size */ |
| old_size = type->max * sizeof(struct memblock_region); |
| new_size = old_size << 1; |
| |
| /* Try to find some space for it. |
| * |
| * WARNING: We assume that either slab_is_available() and we use it or |
| * we use MEMBLOCK for allocations. That means that this is unsafe to use |
| * when bootmem is currently active (unless bootmem itself is implemented |
| * on top of MEMBLOCK which isn't the case yet) |
| * |
| * This should however not be an issue for now, as we currently only |
| * call into MEMBLOCK while it's still active, or much later when slab is |
| * active for memory hotplug operations |
| */ |
| if (use_slab) { |
| new_array = kmalloc(new_size, GFP_KERNEL); |
| addr = new_array ? __pa(new_array) : 0; |
| } else |
| addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t)); |
| if (!addr) { |
| pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n", |
| memblock_type_name(type), type->max, type->max * 2); |
| return -1; |
| } |
| new_array = __va(addr); |
| |
| memblock_dbg("memblock: %s array is doubled to %ld at [%#010llx-%#010llx]", |
| memblock_type_name(type), type->max * 2, (u64)addr, (u64)addr + new_size - 1); |
| |
| /* Found space, we now need to move the array over before |
| * we add the reserved region since it may be our reserved |
| * array itself that is full. |
| */ |
| memcpy(new_array, type->regions, old_size); |
| memset(new_array + type->max, 0, old_size); |
| old_array = type->regions; |
| type->regions = new_array; |
| type->max <<= 1; |
| |
| /* If we use SLAB that's it, we are done */ |
| if (use_slab) |
| return 0; |
| |
| /* Add the new reserved region now. Should not fail ! */ |
| BUG_ON(memblock_add_region(&memblock.reserved, addr, new_size)); |
| |
| /* If the array wasn't our static init one, then free it. We only do |
| * that before SLAB is available as later on, we don't know whether |
| * to use kfree or free_bootmem_pages(). Shouldn't be a big deal |
| * anyways |
| */ |
| if (old_array != memblock_memory_init_regions && |
| old_array != memblock_reserved_init_regions) |
| memblock_free(__pa(old_array), old_size); |
| |
| return 0; |
| } |
| |
| /** |
| * memblock_merge_regions - merge neighboring compatible regions |
| * @type: memblock type to scan |
| * |
| * Scan @type and merge neighboring compatible regions. |
| */ |
| static void __init_memblock memblock_merge_regions(struct memblock_type *type) |
| { |
| int i = 0; |
| |
| /* cnt never goes below 1 */ |
| while (i < type->cnt - 1) { |
| struct memblock_region *this = &type->regions[i]; |
| struct memblock_region *next = &type->regions[i + 1]; |
| |
| if (this->base + this->size != next->base || |
| memblock_get_region_node(this) != |
| memblock_get_region_node(next)) { |
| BUG_ON(this->base + this->size > next->base); |
| i++; |
| continue; |
| } |
| |
| this->size += next->size; |
| memmove(next, next + 1, (type->cnt - (i + 1)) * sizeof(*next)); |
| type->cnt--; |
| } |
| } |
| |
| /** |
| * memblock_insert_region - insert new memblock region |
| * @type: memblock type to insert into |
| * @idx: index for the insertion point |
| * @base: base address of the new region |
| * @size: size of the new region |
| * |
| * Insert new memblock region [@base,@base+@size) into @type at @idx. |
| * @type must already have extra room to accomodate the new region. |
| */ |
| static void __init_memblock memblock_insert_region(struct memblock_type *type, |
| int idx, phys_addr_t base, |
| phys_addr_t size, int nid) |
| { |
| struct memblock_region *rgn = &type->regions[idx]; |
| |
| BUG_ON(type->cnt >= type->max); |
| memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn)); |
| rgn->base = base; |
| rgn->size = size; |
| memblock_set_region_node(rgn, nid); |
| type->cnt++; |
| } |
| |
| /** |
| * memblock_add_region - add new memblock region |
| * @type: memblock type to add new region into |
| * @base: base address of the new region |
| * @size: size of the new region |
| * |
| * Add new memblock region [@base,@base+@size) into @type. The new region |
| * is allowed to overlap with existing ones - overlaps don't affect already |
| * existing regions. @type is guaranteed to be minimal (all neighbouring |
| * compatible regions are merged) after the addition. |
| * |
| * RETURNS: |
| * 0 on success, -errno on failure. |
| */ |
| static long __init_memblock memblock_add_region(struct memblock_type *type, |
| phys_addr_t base, phys_addr_t size) |
| { |
| bool insert = false; |
| phys_addr_t obase = base, end = base + size; |
| int i, nr_new; |
| |
| /* special case for empty array */ |
| if (type->regions[0].size == 0) { |
| WARN_ON(type->cnt != 1); |
| type->regions[0].base = base; |
| type->regions[0].size = size; |
| memblock_set_region_node(&type->regions[0], MAX_NUMNODES); |
| return 0; |
| } |
| repeat: |
| /* |
| * The following is executed twice. Once with %false @insert and |
| * then with %true. The first counts the number of regions needed |
| * to accomodate the new area. The second actually inserts them. |
| */ |
| base = obase; |
| nr_new = 0; |
| |
| for (i = 0; i < type->cnt; i++) { |
| struct memblock_region *rgn = &type->regions[i]; |
| phys_addr_t rbase = rgn->base; |
| phys_addr_t rend = rbase + rgn->size; |
| |
| if (rbase >= end) |
| break; |
| if (rend <= base) |
| continue; |
| /* |
| * @rgn overlaps. If it separates the lower part of new |
| * area, insert that portion. |
| */ |
| if (rbase > base) { |
| nr_new++; |
| if (insert) |
| memblock_insert_region(type, i++, base, |
| rbase - base, MAX_NUMNODES); |
| } |
| /* area below @rend is dealt with, forget about it */ |
| base = min(rend, end); |
| } |
| |
| /* insert the remaining portion */ |
| if (base < end) { |
| nr_new++; |
| if (insert) |
| memblock_insert_region(type, i, base, end - base, |
| MAX_NUMNODES); |
| } |
| |
| /* |
| * If this was the first round, resize array and repeat for actual |
| * insertions; otherwise, merge and return. |
| */ |
| if (!insert) { |
| while (type->cnt + nr_new > type->max) |
| if (memblock_double_array(type) < 0) |
| return -ENOMEM; |
| insert = true; |
| goto repeat; |
| } else { |
| memblock_merge_regions(type); |
| return 0; |
| } |
| } |
| |
| long __init_memblock memblock_add(phys_addr_t base, phys_addr_t size) |
| { |
| return memblock_add_region(&memblock.memory, base, size); |
| } |
| |
| static long __init_memblock __memblock_remove(struct memblock_type *type, |
| phys_addr_t base, phys_addr_t size) |
| { |
| phys_addr_t end = base + size; |
| int i; |
| |
| /* Walk through the array for collisions */ |
| for (i = 0; i < type->cnt; i++) { |
| struct memblock_region *rgn = &type->regions[i]; |
| phys_addr_t rend = rgn->base + rgn->size; |
| |
| /* Nothing more to do, exit */ |
| if (rgn->base > end || rgn->size == 0) |
| break; |
| |
| /* If we fully enclose the block, drop it */ |
| if (base <= rgn->base && end >= rend) { |
| memblock_remove_region(type, i--); |
| continue; |
| } |
| |
| /* If we are fully enclosed within a block |
| * then we need to split it and we are done |
| */ |
| if (base > rgn->base && end < rend) { |
| rgn->size = base - rgn->base; |
| if (!memblock_add_region(type, end, rend - end)) |
| return 0; |
| /* Failure to split is bad, we at least |
| * restore the block before erroring |
| */ |
| rgn->size = rend - rgn->base; |
| WARN_ON(1); |
| return -1; |
| } |
| |
| /* Check if we need to trim the bottom of a block */ |
| if (rgn->base < end && rend > end) { |
| rgn->size -= end - rgn->base; |
| rgn->base = end; |
| break; |
| } |
| |
| /* And check if we need to trim the top of a block */ |
| if (base < rend) |
| rgn->size -= rend - base; |
| |
| } |
| return 0; |
| } |
| |
| long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size) |
| { |
| return __memblock_remove(&memblock.memory, base, size); |
| } |
| |
| long __init_memblock memblock_free(phys_addr_t base, phys_addr_t size) |
| { |
| memblock_dbg(" memblock_free: [%#016llx-%#016llx] %pF\n", |
| base, base + size, (void *)_RET_IP_); |
| |
| return __memblock_remove(&memblock.reserved, base, size); |
| } |
| |
| long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size) |
| { |
| struct memblock_type *_rgn = &memblock.reserved; |
| |
| memblock_dbg("memblock_reserve: [%#016llx-%#016llx] %pF\n", |
| base, base + size, (void *)_RET_IP_); |
| BUG_ON(0 == size); |
| |
| return memblock_add_region(_rgn, base, size); |
| } |
| |
| /** |
| * __next_free_mem_range - next function for for_each_free_mem_range() |
| * @idx: pointer to u64 loop variable |
| * @nid: nid: node selector, %MAX_NUMNODES for all nodes |
| * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL |
| * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL |
| * @p_nid: ptr to int for nid of the range, can be %NULL |
| * |
| * Find the first free area from *@idx which matches @nid, fill the out |
| * parameters, and update *@idx for the next iteration. The lower 32bit of |
| * *@idx contains index into memory region and the upper 32bit indexes the |
| * areas before each reserved region. For example, if reserved regions |
| * look like the following, |
| * |
| * 0:[0-16), 1:[32-48), 2:[128-130) |
| * |
| * The upper 32bit indexes the following regions. |
| * |
| * 0:[0-0), 1:[16-32), 2:[48-128), 3:[130-MAX) |
| * |
| * As both region arrays are sorted, the function advances the two indices |
| * in lockstep and returns each intersection. |
| */ |
| void __init_memblock __next_free_mem_range(u64 *idx, int nid, |
| phys_addr_t *out_start, |
| phys_addr_t *out_end, int *out_nid) |
| { |
| struct memblock_type *mem = &memblock.memory; |
| struct memblock_type *rsv = &memblock.reserved; |
| int mi = *idx & 0xffffffff; |
| int ri = *idx >> 32; |
| |
| for ( ; mi < mem->cnt; mi++) { |
| struct memblock_region *m = &mem->regions[mi]; |
| phys_addr_t m_start = m->base; |
| phys_addr_t m_end = m->base + m->size; |
| |
| /* only memory regions are associated with nodes, check it */ |
| if (nid != MAX_NUMNODES && nid != memblock_get_region_node(m)) |
| continue; |
| |
| /* scan areas before each reservation for intersection */ |
| for ( ; ri < rsv->cnt + 1; ri++) { |
| struct memblock_region *r = &rsv->regions[ri]; |
| phys_addr_t r_start = ri ? r[-1].base + r[-1].size : 0; |
| phys_addr_t r_end = ri < rsv->cnt ? r->base : ULLONG_MAX; |
| |
| /* if ri advanced past mi, break out to advance mi */ |
| if (r_start >= m_end) |
| break; |
| /* if the two regions intersect, we're done */ |
| if (m_start < r_end) { |
| if (out_start) |
| *out_start = max(m_start, r_start); |
| if (out_end) |
| *out_end = min(m_end, r_end); |
| if (out_nid) |
| *out_nid = memblock_get_region_node(m); |
| /* |
| * The region which ends first is advanced |
| * for the next iteration. |
| */ |
| if (m_end <= r_end) |
| mi++; |
| else |
| ri++; |
| *idx = (u32)mi | (u64)ri << 32; |
| return; |
| } |
| } |
| } |
| |
| /* signal end of iteration */ |
| *idx = ULLONG_MAX; |
| } |
| |
| #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP |
| /* |
| * Common iterator interface used to define for_each_mem_range(). |
| */ |
| void __init_memblock __next_mem_pfn_range(int *idx, int nid, |
| unsigned long *out_start_pfn, |
| unsigned long *out_end_pfn, int *out_nid) |
| { |
| struct memblock_type *type = &memblock.memory; |
| struct memblock_region *r; |
| |
| while (++*idx < type->cnt) { |
| r = &type->regions[*idx]; |
| |
| if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size)) |
| continue; |
| if (nid == MAX_NUMNODES || nid == r->nid) |
| break; |
| } |
| if (*idx >= type->cnt) { |
| *idx = -1; |
| return; |
| } |
| |
| if (out_start_pfn) |
| *out_start_pfn = PFN_UP(r->base); |
| if (out_end_pfn) |
| *out_end_pfn = PFN_DOWN(r->base + r->size); |
| if (out_nid) |
| *out_nid = r->nid; |
| } |
| |
| /** |
| * memblock_set_node - set node ID on memblock regions |
| * @base: base of area to set node ID for |
| * @size: size of area to set node ID for |
| * @nid: node ID to set |
| * |
| * Set the nid of memblock memory regions in [@base,@base+@size) to @nid. |
| * Regions which cross the area boundaries are split as necessary. |
| * |
| * RETURNS: |
| * 0 on success, -errno on failure. |
| */ |
| int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size, |
| int nid) |
| { |
| struct memblock_type *type = &memblock.memory; |
| phys_addr_t end = base + size; |
| int i; |
| |
| /* we'll create at most two more regions */ |
| while (type->cnt + 2 > type->max) |
| if (memblock_double_array(type) < 0) |
| return -ENOMEM; |
| |
| for (i = 0; i < type->cnt; i++) { |
| struct memblock_region *rgn = &type->regions[i]; |
| phys_addr_t rbase = rgn->base; |
| phys_addr_t rend = rbase + rgn->size; |
| |
| if (rbase >= end) |
| break; |
| if (rend <= base) |
| continue; |
| |
| if (rbase < base) { |
| /* |
| * @rgn intersects from below. Split and continue |
| * to process the next region - the new top half. |
| */ |
| rgn->base = base; |
| rgn->size = rend - rgn->base; |
| memblock_insert_region(type, i, rbase, base - rbase, |
| rgn->nid); |
| } else if (rend > end) { |
| /* |
| * @rgn intersects from above. Split and redo the |
| * current region - the new bottom half. |
| */ |
| rgn->base = end; |
| rgn->size = rend - rgn->base; |
| memblock_insert_region(type, i--, rbase, end - rbase, |
| rgn->nid); |
| } else { |
| /* @rgn is fully contained, set ->nid */ |
| rgn->nid = nid; |
| } |
| } |
| |
| memblock_merge_regions(type); |
| return 0; |
| } |
| #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */ |
| |
| phys_addr_t __init __memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr) |
| { |
| phys_addr_t found; |
| |
| /* We align the size to limit fragmentation. Without this, a lot of |
| * small allocs quickly eat up the whole reserve array on sparc |
| */ |
| size = round_up(size, align); |
| |
| found = memblock_find_in_range(0, max_addr, size, align); |
| if (found && !memblock_add_region(&memblock.reserved, found, size)) |
| return found; |
| |
| return 0; |
| } |
| |
| phys_addr_t __init memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr) |
| { |
| phys_addr_t alloc; |
| |
| alloc = __memblock_alloc_base(size, align, max_addr); |
| |
| if (alloc == 0) |
| panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n", |
| (unsigned long long) size, (unsigned long long) max_addr); |
| |
| return alloc; |
| } |
| |
| phys_addr_t __init memblock_alloc(phys_addr_t size, phys_addr_t align) |
| { |
| return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); |
| } |
| |
| |
| /* |
| * Additional node-local top-down allocators. |
| * |
| * WARNING: Only available after early_node_map[] has been populated, |
| * on some architectures, that is after all the calls to add_active_range() |
| * have been done to populate it. |
| */ |
| |
| static phys_addr_t __init memblock_nid_range_rev(phys_addr_t start, |
| phys_addr_t end, int *nid) |
| { |
| #ifdef CONFIG_ARCH_POPULATES_NODE_MAP |
| unsigned long start_pfn, end_pfn; |
| int i; |
| |
| for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, nid) |
| if (end > PFN_PHYS(start_pfn) && end <= PFN_PHYS(end_pfn)) |
| return max(start, PFN_PHYS(start_pfn)); |
| #endif |
| *nid = 0; |
| return start; |
| } |
| |
| phys_addr_t __init memblock_find_in_range_node(phys_addr_t start, |
| phys_addr_t end, |
| phys_addr_t size, |
| phys_addr_t align, int nid) |
| { |
| struct memblock_type *mem = &memblock.memory; |
| int i; |
| |
| BUG_ON(0 == size); |
| |
| /* Pump up max_addr */ |
| if (end == MEMBLOCK_ALLOC_ACCESSIBLE) |
| end = memblock.current_limit; |
| |
| for (i = mem->cnt - 1; i >= 0; i--) { |
| struct memblock_region *r = &mem->regions[i]; |
| phys_addr_t base = max(start, r->base); |
| phys_addr_t top = min(end, r->base + r->size); |
| |
| while (base < top) { |
| phys_addr_t tbase, ret; |
| int tnid; |
| |
| tbase = memblock_nid_range_rev(base, top, &tnid); |
| if (nid == MAX_NUMNODES || tnid == nid) { |
| ret = memblock_find_region(tbase, top, size, align); |
| if (ret) |
| return ret; |
| } |
| top = tbase; |
| } |
| } |
| |
| return 0; |
| } |
| |
| phys_addr_t __init memblock_alloc_nid(phys_addr_t size, phys_addr_t align, int nid) |
| { |
| phys_addr_t found; |
| |
| /* |
| * We align the size to limit fragmentation. Without this, a lot of |
| * small allocs quickly eat up the whole reserve array on sparc |
| */ |
| size = round_up(size, align); |
| |
| found = memblock_find_in_range_node(0, MEMBLOCK_ALLOC_ACCESSIBLE, |
| size, align, nid); |
| if (found && !memblock_add_region(&memblock.reserved, found, size)) |
| return found; |
| |
| return 0; |
| } |
| |
| phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid) |
| { |
| phys_addr_t res = memblock_alloc_nid(size, align, nid); |
| |
| if (res) |
| return res; |
| return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); |
| } |
| |
| |
| /* |
| * Remaining API functions |
| */ |
| |
| /* You must call memblock_analyze() before this. */ |
| phys_addr_t __init memblock_phys_mem_size(void) |
| { |
| return memblock.memory_size; |
| } |
| |
| phys_addr_t __init_memblock memblock_end_of_DRAM(void) |
| { |
| int idx = memblock.memory.cnt - 1; |
| |
| return (memblock.memory.regions[idx].base + memblock.memory.regions[idx].size); |
| } |
| |
| /* You must call memblock_analyze() after this. */ |
| void __init memblock_enforce_memory_limit(phys_addr_t memory_limit) |
| { |
| unsigned long i; |
| phys_addr_t limit; |
| struct memblock_region *p; |
| |
| if (!memory_limit) |
| return; |
| |
| /* Truncate the memblock regions to satisfy the memory limit. */ |
| limit = memory_limit; |
| for (i = 0; i < memblock.memory.cnt; i++) { |
| if (limit > memblock.memory.regions[i].size) { |
| limit -= memblock.memory.regions[i].size; |
| continue; |
| } |
| |
| memblock.memory.regions[i].size = limit; |
| memblock.memory.cnt = i + 1; |
| break; |
| } |
| |
| memory_limit = memblock_end_of_DRAM(); |
| |
| /* And truncate any reserves above the limit also. */ |
| for (i = 0; i < memblock.reserved.cnt; i++) { |
| p = &memblock.reserved.regions[i]; |
| |
| if (p->base > memory_limit) |
| p->size = 0; |
| else if ((p->base + p->size) > memory_limit) |
| p->size = memory_limit - p->base; |
| |
| if (p->size == 0) { |
| memblock_remove_region(&memblock.reserved, i); |
| i--; |
| } |
| } |
| } |
| |
| static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr) |
| { |
| unsigned int left = 0, right = type->cnt; |
| |
| do { |
| unsigned int mid = (right + left) / 2; |
| |
| if (addr < type->regions[mid].base) |
| right = mid; |
| else if (addr >= (type->regions[mid].base + |
| type->regions[mid].size)) |
| left = mid + 1; |
| else |
| return mid; |
| } while (left < right); |
| return -1; |
| } |
| |
| int __init memblock_is_reserved(phys_addr_t addr) |
| { |
| return memblock_search(&memblock.reserved, addr) != -1; |
| } |
| |
| int __init_memblock memblock_is_memory(phys_addr_t addr) |
| { |
| return memblock_search(&memblock.memory, addr) != -1; |
| } |
| |
| int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size) |
| { |
| int idx = memblock_search(&memblock.memory, base); |
| |
| if (idx == -1) |
| return 0; |
| return memblock.memory.regions[idx].base <= base && |
| (memblock.memory.regions[idx].base + |
| memblock.memory.regions[idx].size) >= (base + size); |
| } |
| |
| int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size) |
| { |
| return memblock_overlaps_region(&memblock.reserved, base, size) >= 0; |
| } |
| |
| |
| void __init_memblock memblock_set_current_limit(phys_addr_t limit) |
| { |
| memblock.current_limit = limit; |
| } |
| |
| static void __init_memblock memblock_dump(struct memblock_type *type, char *name) |
| { |
| unsigned long long base, size; |
| int i; |
| |
| pr_info(" %s.cnt = 0x%lx\n", name, type->cnt); |
| |
| for (i = 0; i < type->cnt; i++) { |
| struct memblock_region *rgn = &type->regions[i]; |
| char nid_buf[32] = ""; |
| |
| base = rgn->base; |
| size = rgn->size; |
| #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP |
| if (memblock_get_region_node(rgn) != MAX_NUMNODES) |
| snprintf(nid_buf, sizeof(nid_buf), " on node %d", |
| memblock_get_region_node(rgn)); |
| #endif |
| pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes%s\n", |
| name, i, base, base + size - 1, size, nid_buf); |
| } |
| } |
| |
| void __init_memblock memblock_dump_all(void) |
| { |
| if (!memblock_debug) |
| return; |
| |
| pr_info("MEMBLOCK configuration:\n"); |
| pr_info(" memory size = 0x%llx\n", (unsigned long long)memblock.memory_size); |
| |
| memblock_dump(&memblock.memory, "memory"); |
| memblock_dump(&memblock.reserved, "reserved"); |
| } |
| |
| void __init memblock_analyze(void) |
| { |
| int i; |
| |
| /* Check marker in the unused last array entry */ |
| WARN_ON(memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS].base |
| != (phys_addr_t)RED_INACTIVE); |
| WARN_ON(memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS].base |
| != (phys_addr_t)RED_INACTIVE); |
| |
| memblock.memory_size = 0; |
| |
| for (i = 0; i < memblock.memory.cnt; i++) |
| memblock.memory_size += memblock.memory.regions[i].size; |
| |
| /* We allow resizing from there */ |
| memblock_can_resize = 1; |
| } |
| |
| void __init memblock_init(void) |
| { |
| static int init_done __initdata = 0; |
| |
| if (init_done) |
| return; |
| init_done = 1; |
| |
| /* Hookup the initial arrays */ |
| memblock.memory.regions = memblock_memory_init_regions; |
| memblock.memory.max = INIT_MEMBLOCK_REGIONS; |
| memblock.reserved.regions = memblock_reserved_init_regions; |
| memblock.reserved.max = INIT_MEMBLOCK_REGIONS; |
| |
| /* Write a marker in the unused last array entry */ |
| memblock.memory.regions[INIT_MEMBLOCK_REGIONS].base = (phys_addr_t)RED_INACTIVE; |
| memblock.reserved.regions[INIT_MEMBLOCK_REGIONS].base = (phys_addr_t)RED_INACTIVE; |
| |
| /* Create a dummy zero size MEMBLOCK which will get coalesced away later. |
| * This simplifies the memblock_add() code below... |
| */ |
| memblock.memory.regions[0].base = 0; |
| memblock.memory.regions[0].size = 0; |
| memblock_set_region_node(&memblock.memory.regions[0], MAX_NUMNODES); |
| memblock.memory.cnt = 1; |
| |
| /* Ditto. */ |
| memblock.reserved.regions[0].base = 0; |
| memblock.reserved.regions[0].size = 0; |
| memblock_set_region_node(&memblock.reserved.regions[0], MAX_NUMNODES); |
| memblock.reserved.cnt = 1; |
| |
| memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE; |
| } |
| |
| static int __init early_memblock(char *p) |
| { |
| if (p && strstr(p, "debug")) |
| memblock_debug = 1; |
| return 0; |
| } |
| early_param("memblock", early_memblock); |
| |
| #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_ARCH_DISCARD_MEMBLOCK) |
| |
| static int memblock_debug_show(struct seq_file *m, void *private) |
| { |
| struct memblock_type *type = m->private; |
| struct memblock_region *reg; |
| int i; |
| |
| for (i = 0; i < type->cnt; i++) { |
| reg = &type->regions[i]; |
| seq_printf(m, "%4d: ", i); |
| if (sizeof(phys_addr_t) == 4) |
| seq_printf(m, "0x%08lx..0x%08lx\n", |
| (unsigned long)reg->base, |
| (unsigned long)(reg->base + reg->size - 1)); |
| else |
| seq_printf(m, "0x%016llx..0x%016llx\n", |
| (unsigned long long)reg->base, |
| (unsigned long long)(reg->base + reg->size - 1)); |
| |
| } |
| return 0; |
| } |
| |
| static int memblock_debug_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, memblock_debug_show, inode->i_private); |
| } |
| |
| static const struct file_operations memblock_debug_fops = { |
| .open = memblock_debug_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int __init memblock_init_debugfs(void) |
| { |
| struct dentry *root = debugfs_create_dir("memblock", NULL); |
| if (!root) |
| return -ENXIO; |
| debugfs_create_file("memory", S_IRUGO, root, &memblock.memory, &memblock_debug_fops); |
| debugfs_create_file("reserved", S_IRUGO, root, &memblock.reserved, &memblock_debug_fops); |
| |
| return 0; |
| } |
| __initcall(memblock_init_debugfs); |
| |
| #endif /* CONFIG_DEBUG_FS */ |