| /* |
| * Copyright (C) ST-Ericsson AB 2010 |
| * Author: Sjur Brendeland/sjur.brandeland@stericsson.com |
| * License terms: GNU General Public License (GPL) version 2 |
| */ |
| |
| #ifndef CFCNFG_H_ |
| #define CFCNFG_H_ |
| #include <linux/spinlock.h> |
| #include <linux/netdevice.h> |
| #include <net/caif/caif_layer.h> |
| #include <net/caif/cfctrl.h> |
| |
| struct cfcnfg; |
| |
| /** |
| * enum cfcnfg_phy_type - Types of physical layers defined in CAIF Stack |
| * |
| * @CFPHYTYPE_FRAG: Fragmented frames physical interface. |
| * @CFPHYTYPE_CAIF: Generic CAIF physical interface |
| */ |
| enum cfcnfg_phy_type { |
| CFPHYTYPE_FRAG = 1, |
| CFPHYTYPE_CAIF, |
| CFPHYTYPE_MAX |
| }; |
| |
| /** |
| * enum cfcnfg_phy_preference - Physical preference HW Abstraction |
| * |
| * @CFPHYPREF_UNSPECIFIED: Default physical interface |
| * |
| * @CFPHYPREF_LOW_LAT: Default physical interface for low-latency |
| * traffic |
| * @CFPHYPREF_HIGH_BW: Default physical interface for high-bandwidth |
| * traffic |
| * @CFPHYPREF_LOOP: TEST only Loopback interface simulating modem |
| * responses. |
| * |
| */ |
| enum cfcnfg_phy_preference { |
| CFPHYPREF_UNSPECIFIED, |
| CFPHYPREF_LOW_LAT, |
| CFPHYPREF_HIGH_BW, |
| CFPHYPREF_LOOP |
| }; |
| |
| /** |
| * cfcnfg_create() - Create the CAIF configuration object. |
| */ |
| struct cfcnfg *cfcnfg_create(void); |
| |
| /** |
| * cfcnfg_remove() - Remove the CFCNFG object |
| * @cfg: config object |
| */ |
| void cfcnfg_remove(struct cfcnfg *cfg); |
| |
| /** |
| * cfcnfg_add_phy_layer() - Adds a physical layer to the CAIF stack. |
| * @cnfg: Pointer to a CAIF configuration object, created by |
| * cfcnfg_create(). |
| * @phy_type: Specifies the type of physical interface, e.g. |
| * CFPHYTYPE_FRAG. |
| * @dev: Pointer to link layer device |
| * @phy_layer: Specify the physical layer. The transmit function |
| * MUST be set in the structure. |
| * @phyid: The assigned physical ID for this layer, used in |
| * cfcnfg_add_adapt_layer to specify PHY for the link. |
| * @pref: The phy (link layer) preference. |
| * @fcs: Specify if checksum is used in CAIF Framing Layer. |
| * @stx: Specify if Start Of Frame extension is used. |
| */ |
| |
| void |
| cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type, |
| struct net_device *dev, struct cflayer *phy_layer, |
| u16 *phyid, enum cfcnfg_phy_preference pref, |
| bool fcs, bool stx); |
| |
| /** |
| * cfcnfg_del_phy_layer - Deletes an phy layer from the CAIF stack. |
| * |
| * @cnfg: Pointer to a CAIF configuration object, created by |
| * cfcnfg_create(). |
| * @phy_layer: Adaptation layer to be removed. |
| */ |
| int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer); |
| |
| /** |
| * cfcnfg_disconn_adapt_layer - Disconnects an adaptation layer. |
| * |
| * @cnfg: Pointer to a CAIF configuration object, created by |
| * cfcnfg_create(). |
| * @adap_layer: Adaptation layer to be removed. |
| */ |
| int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg, |
| struct cflayer *adap_layer); |
| |
| /** |
| * cfcnfg_release_adap_layer - Used by client to release the adaptation layer. |
| * |
| * @adap_layer: Adaptation layer. |
| */ |
| void cfcnfg_release_adap_layer(struct cflayer *adap_layer); |
| |
| /** |
| * cfcnfg_add_adaptation_layer - Add an adaptation layer to the CAIF stack. |
| * |
| * The adaptation Layer is where the interface to application or higher-level |
| * driver functionality is implemented. |
| * |
| * @cnfg: Pointer to a CAIF configuration object, created by |
| * cfcnfg_create(). |
| * @param: Link setup parameters. |
| * @adap_layer: Specify the adaptation layer; the receive and |
| * flow-control functions MUST be set in the structure. |
| * @ifindex: Link layer interface index used for this connection. |
| * @proto_head: Protocol head-space needed by CAIF protocol, |
| * excluding link layer. |
| * @proto_tail: Protocol tail-space needed by CAIF protocol, |
| * excluding link layer. |
| */ |
| int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg, |
| struct cfctrl_link_param *param, |
| struct cflayer *adap_layer, |
| int *ifindex, |
| int *proto_head, |
| int *proto_tail); |
| |
| /** |
| * cfcnfg_get_phyid() - Get physical ID, given type. |
| * Returns one of the physical interfaces matching the given type. |
| * Zero if no match is found. |
| * @cnfg: Configuration object |
| * @phy_pref: Caif Link Layer preference |
| */ |
| struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg, |
| enum cfcnfg_phy_preference phy_pref); |
| |
| /** |
| * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex, |
| * it matches caif physical id with the kernel interface id. |
| * @cnfg: Configuration object |
| * @ifi: ifindex obtained from socket.c bindtodevice. |
| */ |
| int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi); |
| #endif /* CFCNFG_H_ */ |