|  | /* | 
|  | * Driver for the Atmel on-chip Audio Bitstream DAC (ABDAC) | 
|  | * | 
|  | * Copyright (C) 2006-2009 Atmel Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License version 2 as published by | 
|  | * the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/clk.h> | 
|  | #include <linux/bitmap.h> | 
|  | #include <linux/dw_dmac.h> | 
|  | #include <linux/dmaengine.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <sound/core.h> | 
|  | #include <sound/initval.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/atmel-abdac.h> | 
|  |  | 
|  | /* DAC register offsets */ | 
|  | #define DAC_DATA                                0x0000 | 
|  | #define DAC_CTRL                                0x0008 | 
|  | #define DAC_INT_MASK                            0x000c | 
|  | #define DAC_INT_EN                              0x0010 | 
|  | #define DAC_INT_DIS                             0x0014 | 
|  | #define DAC_INT_CLR                             0x0018 | 
|  | #define DAC_INT_STATUS                          0x001c | 
|  |  | 
|  | /* Bitfields in CTRL */ | 
|  | #define DAC_SWAP_OFFSET                         30 | 
|  | #define DAC_SWAP_SIZE                           1 | 
|  | #define DAC_EN_OFFSET                           31 | 
|  | #define DAC_EN_SIZE                             1 | 
|  |  | 
|  | /* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */ | 
|  | #define DAC_UNDERRUN_OFFSET                     28 | 
|  | #define DAC_UNDERRUN_SIZE                       1 | 
|  | #define DAC_TX_READY_OFFSET                     29 | 
|  | #define DAC_TX_READY_SIZE                       1 | 
|  |  | 
|  | /* Bit manipulation macros */ | 
|  | #define DAC_BIT(name)					\ | 
|  | (1 << DAC_##name##_OFFSET) | 
|  | #define DAC_BF(name, value)				\ | 
|  | (((value) & ((1 << DAC_##name##_SIZE) - 1))	\ | 
|  | << DAC_##name##_OFFSET) | 
|  | #define DAC_BFEXT(name, value)				\ | 
|  | (((value) >> DAC_##name##_OFFSET)		\ | 
|  | & ((1 << DAC_##name##_SIZE) - 1)) | 
|  | #define DAC_BFINS(name, value, old)			\ | 
|  | (((old) & ~(((1 << DAC_##name##_SIZE) - 1)	\ | 
|  | << DAC_##name##_OFFSET))		\ | 
|  | | DAC_BF(name, value)) | 
|  |  | 
|  | /* Register access macros */ | 
|  | #define dac_readl(port, reg)				\ | 
|  | __raw_readl((port)->regs + DAC_##reg) | 
|  | #define dac_writel(port, reg, value)			\ | 
|  | __raw_writel((value), (port)->regs + DAC_##reg) | 
|  |  | 
|  | /* | 
|  | * ABDAC supports a maximum of 6 different rates from a generic clock. The | 
|  | * generic clock has a power of two divider, which gives 6 steps from 192 kHz | 
|  | * to 5112 Hz. | 
|  | */ | 
|  | #define MAX_NUM_RATES	6 | 
|  | /* ALSA seems to use rates between 192000 Hz and 5112 Hz. */ | 
|  | #define RATE_MAX	192000 | 
|  | #define RATE_MIN	5112 | 
|  |  | 
|  | enum { | 
|  | DMA_READY = 0, | 
|  | }; | 
|  |  | 
|  | struct atmel_abdac_dma { | 
|  | struct dma_chan		*chan; | 
|  | struct dw_cyclic_desc	*cdesc; | 
|  | }; | 
|  |  | 
|  | struct atmel_abdac { | 
|  | struct clk				*pclk; | 
|  | struct clk				*sample_clk; | 
|  | struct platform_device			*pdev; | 
|  | struct atmel_abdac_dma			dma; | 
|  |  | 
|  | struct snd_pcm_hw_constraint_list	constraints_rates; | 
|  | struct snd_pcm_substream		*substream; | 
|  | struct snd_card				*card; | 
|  | struct snd_pcm				*pcm; | 
|  |  | 
|  | void __iomem				*regs; | 
|  | unsigned long				flags; | 
|  | unsigned int				rates[MAX_NUM_RATES]; | 
|  | unsigned int				rates_num; | 
|  | int					irq; | 
|  | }; | 
|  |  | 
|  | #define get_dac(card) ((struct atmel_abdac *)(card)->private_data) | 
|  |  | 
|  | /* This function is called by the DMA driver. */ | 
|  | static void atmel_abdac_dma_period_done(void *arg) | 
|  | { | 
|  | struct atmel_abdac *dac = arg; | 
|  | snd_pcm_period_elapsed(dac->substream); | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_prepare_dma(struct atmel_abdac *dac, | 
|  | struct snd_pcm_substream *substream, | 
|  | enum dma_data_direction direction) | 
|  | { | 
|  | struct dma_chan			*chan = dac->dma.chan; | 
|  | struct dw_cyclic_desc		*cdesc; | 
|  | struct snd_pcm_runtime		*runtime = substream->runtime; | 
|  | unsigned long			buffer_len, period_len; | 
|  |  | 
|  | /* | 
|  | * We don't do DMA on "complex" transfers, i.e. with | 
|  | * non-halfword-aligned buffers or lengths. | 
|  | */ | 
|  | if (runtime->dma_addr & 1 || runtime->buffer_size & 1) { | 
|  | dev_dbg(&dac->pdev->dev, "too complex transfer\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | buffer_len = frames_to_bytes(runtime, runtime->buffer_size); | 
|  | period_len = frames_to_bytes(runtime, runtime->period_size); | 
|  |  | 
|  | cdesc = dw_dma_cyclic_prep(chan, runtime->dma_addr, buffer_len, | 
|  | period_len, DMA_TO_DEVICE); | 
|  | if (IS_ERR(cdesc)) { | 
|  | dev_dbg(&dac->pdev->dev, "could not prepare cyclic DMA\n"); | 
|  | return PTR_ERR(cdesc); | 
|  | } | 
|  |  | 
|  | cdesc->period_callback = atmel_abdac_dma_period_done; | 
|  | cdesc->period_callback_param = dac; | 
|  |  | 
|  | dac->dma.cdesc = cdesc; | 
|  |  | 
|  | set_bit(DMA_READY, &dac->flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct snd_pcm_hardware atmel_abdac_hw = { | 
|  | .info			= (SNDRV_PCM_INFO_MMAP | 
|  | | SNDRV_PCM_INFO_MMAP_VALID | 
|  | | SNDRV_PCM_INFO_INTERLEAVED | 
|  | | SNDRV_PCM_INFO_BLOCK_TRANSFER | 
|  | | SNDRV_PCM_INFO_RESUME | 
|  | | SNDRV_PCM_INFO_PAUSE), | 
|  | .formats		= (SNDRV_PCM_FMTBIT_S16_BE), | 
|  | .rates			= (SNDRV_PCM_RATE_KNOT), | 
|  | .rate_min		= RATE_MIN, | 
|  | .rate_max		= RATE_MAX, | 
|  | .channels_min		= 2, | 
|  | .channels_max		= 2, | 
|  | .buffer_bytes_max	= 64 * 4096, | 
|  | .period_bytes_min	= 4096, | 
|  | .period_bytes_max	= 4096, | 
|  | .periods_min		= 6, | 
|  | .periods_max		= 64, | 
|  | }; | 
|  |  | 
|  | static int atmel_abdac_open(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
|  |  | 
|  | dac->substream = substream; | 
|  | atmel_abdac_hw.rate_max = dac->rates[dac->rates_num - 1]; | 
|  | atmel_abdac_hw.rate_min = dac->rates[0]; | 
|  | substream->runtime->hw = atmel_abdac_hw; | 
|  |  | 
|  | return snd_pcm_hw_constraint_list(substream->runtime, 0, | 
|  | SNDRV_PCM_HW_PARAM_RATE, &dac->constraints_rates); | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_close(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
|  | dac->substream = NULL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *hw_params) | 
|  | { | 
|  | struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
|  | int retval; | 
|  |  | 
|  | retval = snd_pcm_lib_malloc_pages(substream, | 
|  | params_buffer_bytes(hw_params)); | 
|  | if (retval < 0) | 
|  | return retval; | 
|  | /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ | 
|  | if (retval == 1) | 
|  | if (test_and_clear_bit(DMA_READY, &dac->flags)) | 
|  | dw_dma_cyclic_free(dac->dma.chan); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_hw_free(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
|  | if (test_and_clear_bit(DMA_READY, &dac->flags)) | 
|  | dw_dma_cyclic_free(dac->dma.chan); | 
|  | return snd_pcm_lib_free_pages(substream); | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_prepare(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
|  | int retval; | 
|  |  | 
|  | retval = clk_set_rate(dac->sample_clk, 256 * substream->runtime->rate); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | if (!test_bit(DMA_READY, &dac->flags)) | 
|  | retval = atmel_abdac_prepare_dma(dac, substream, DMA_TO_DEVICE); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_trigger(struct snd_pcm_substream *substream, int cmd) | 
|  | { | 
|  | struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
|  | int retval = 0; | 
|  |  | 
|  | switch (cmd) { | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */ | 
|  | case SNDRV_PCM_TRIGGER_RESUME: /* fall through */ | 
|  | case SNDRV_PCM_TRIGGER_START: | 
|  | clk_enable(dac->sample_clk); | 
|  | retval = dw_dma_cyclic_start(dac->dma.chan); | 
|  | if (retval) | 
|  | goto out; | 
|  | dac_writel(dac, CTRL, DAC_BIT(EN)); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */ | 
|  | case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */ | 
|  | case SNDRV_PCM_TRIGGER_STOP: | 
|  | dw_dma_cyclic_stop(dac->dma.chan); | 
|  | dac_writel(dac, DATA, 0); | 
|  | dac_writel(dac, CTRL, 0); | 
|  | clk_disable(dac->sample_clk); | 
|  | break; | 
|  | default: | 
|  | retval = -EINVAL; | 
|  | break; | 
|  | } | 
|  | out: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static snd_pcm_uframes_t | 
|  | atmel_abdac_pointer(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct atmel_abdac	*dac = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime	*runtime = substream->runtime; | 
|  | snd_pcm_uframes_t	frames; | 
|  | unsigned long		bytes; | 
|  |  | 
|  | bytes = dw_dma_get_src_addr(dac->dma.chan); | 
|  | bytes -= runtime->dma_addr; | 
|  |  | 
|  | frames = bytes_to_frames(runtime, bytes); | 
|  | if (frames >= runtime->buffer_size) | 
|  | frames -= runtime->buffer_size; | 
|  |  | 
|  | return frames; | 
|  | } | 
|  |  | 
|  | static irqreturn_t abdac_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct atmel_abdac *dac = dev_id; | 
|  | u32 status; | 
|  |  | 
|  | status = dac_readl(dac, INT_STATUS); | 
|  | if (status & DAC_BIT(UNDERRUN)) { | 
|  | dev_err(&dac->pdev->dev, "underrun detected\n"); | 
|  | dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN)); | 
|  | } else { | 
|  | dev_err(&dac->pdev->dev, "spurious interrupt (status=0x%x)\n", | 
|  | status); | 
|  | dac_writel(dac, INT_CLR, status); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static struct snd_pcm_ops atmel_abdac_ops = { | 
|  | .open		= atmel_abdac_open, | 
|  | .close		= atmel_abdac_close, | 
|  | .ioctl		= snd_pcm_lib_ioctl, | 
|  | .hw_params	= atmel_abdac_hw_params, | 
|  | .hw_free	= atmel_abdac_hw_free, | 
|  | .prepare	= atmel_abdac_prepare, | 
|  | .trigger	= atmel_abdac_trigger, | 
|  | .pointer	= atmel_abdac_pointer, | 
|  | }; | 
|  |  | 
|  | static int __devinit atmel_abdac_pcm_new(struct atmel_abdac *dac) | 
|  | { | 
|  | struct snd_pcm_hardware hw = atmel_abdac_hw; | 
|  | struct snd_pcm *pcm; | 
|  | int retval; | 
|  |  | 
|  | retval = snd_pcm_new(dac->card, dac->card->shortname, | 
|  | dac->pdev->id, 1, 0, &pcm); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | strcpy(pcm->name, dac->card->shortname); | 
|  | pcm->private_data = dac; | 
|  | pcm->info_flags = 0; | 
|  | dac->pcm = pcm; | 
|  |  | 
|  | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &atmel_abdac_ops); | 
|  |  | 
|  | retval = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, | 
|  | &dac->pdev->dev, hw.periods_min * hw.period_bytes_min, | 
|  | hw.buffer_bytes_max); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static bool filter(struct dma_chan *chan, void *slave) | 
|  | { | 
|  | struct dw_dma_slave *dws = slave; | 
|  |  | 
|  | if (dws->dma_dev == chan->device->dev) { | 
|  | chan->private = dws; | 
|  | return true; | 
|  | } else | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int set_sample_rates(struct atmel_abdac *dac) | 
|  | { | 
|  | long new_rate = RATE_MAX; | 
|  | int retval = -EINVAL; | 
|  | int index = 0; | 
|  |  | 
|  | /* we start at 192 kHz and work our way down to 5112 Hz */ | 
|  | while (new_rate >= RATE_MIN && index < (MAX_NUM_RATES + 1)) { | 
|  | new_rate = clk_round_rate(dac->sample_clk, 256 * new_rate); | 
|  | if (new_rate < 0) | 
|  | break; | 
|  | /* make sure we are below the ABDAC clock */ | 
|  | if (new_rate <= clk_get_rate(dac->pclk)) { | 
|  | dac->rates[index] = new_rate / 256; | 
|  | index++; | 
|  | } | 
|  | /* divide by 256 and then by two to get next rate */ | 
|  | new_rate /= 256 * 2; | 
|  | } | 
|  |  | 
|  | if (index) { | 
|  | int i; | 
|  |  | 
|  | /* reverse array, smallest go first */ | 
|  | for (i = 0; i < (index / 2); i++) { | 
|  | unsigned int tmp = dac->rates[index - 1 - i]; | 
|  | dac->rates[index - 1 - i] = dac->rates[i]; | 
|  | dac->rates[i] = tmp; | 
|  | } | 
|  |  | 
|  | dac->constraints_rates.count = index; | 
|  | dac->constraints_rates.list = dac->rates; | 
|  | dac->constraints_rates.mask = 0; | 
|  | dac->rates_num = index; | 
|  |  | 
|  | retval = 0; | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int __devinit atmel_abdac_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct snd_card		*card; | 
|  | struct atmel_abdac	*dac; | 
|  | struct resource		*regs; | 
|  | struct atmel_abdac_pdata	*pdata; | 
|  | struct clk		*pclk; | 
|  | struct clk		*sample_clk; | 
|  | int			retval; | 
|  | int			irq; | 
|  |  | 
|  | regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!regs) { | 
|  | dev_dbg(&pdev->dev, "no memory resource\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | dev_dbg(&pdev->dev, "could not get IRQ number\n"); | 
|  | return irq; | 
|  | } | 
|  |  | 
|  | pdata = pdev->dev.platform_data; | 
|  | if (!pdata) { | 
|  | dev_dbg(&pdev->dev, "no platform data\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | pclk = clk_get(&pdev->dev, "pclk"); | 
|  | if (IS_ERR(pclk)) { | 
|  | dev_dbg(&pdev->dev, "no peripheral clock\n"); | 
|  | return PTR_ERR(pclk); | 
|  | } | 
|  | sample_clk = clk_get(&pdev->dev, "sample_clk"); | 
|  | if (IS_ERR(sample_clk)) { | 
|  | dev_dbg(&pdev->dev, "no sample clock\n"); | 
|  | retval = PTR_ERR(sample_clk); | 
|  | goto out_put_pclk; | 
|  | } | 
|  | clk_enable(pclk); | 
|  |  | 
|  | retval = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, | 
|  | THIS_MODULE, sizeof(struct atmel_abdac), &card); | 
|  | if (retval) { | 
|  | dev_dbg(&pdev->dev, "could not create sound card device\n"); | 
|  | goto out_put_sample_clk; | 
|  | } | 
|  |  | 
|  | dac = get_dac(card); | 
|  |  | 
|  | dac->irq = irq; | 
|  | dac->card = card; | 
|  | dac->pclk = pclk; | 
|  | dac->sample_clk = sample_clk; | 
|  | dac->pdev = pdev; | 
|  |  | 
|  | retval = set_sample_rates(dac); | 
|  | if (retval < 0) { | 
|  | dev_dbg(&pdev->dev, "could not set supported rates\n"); | 
|  | goto out_free_card; | 
|  | } | 
|  |  | 
|  | dac->regs = ioremap(regs->start, regs->end - regs->start + 1); | 
|  | if (!dac->regs) { | 
|  | dev_dbg(&pdev->dev, "could not remap register memory\n"); | 
|  | goto out_free_card; | 
|  | } | 
|  |  | 
|  | /* make sure the DAC is silent and disabled */ | 
|  | dac_writel(dac, DATA, 0); | 
|  | dac_writel(dac, CTRL, 0); | 
|  |  | 
|  | retval = request_irq(irq, abdac_interrupt, 0, "abdac", dac); | 
|  | if (retval) { | 
|  | dev_dbg(&pdev->dev, "could not request irq\n"); | 
|  | goto out_unmap_regs; | 
|  | } | 
|  |  | 
|  | snd_card_set_dev(card, &pdev->dev); | 
|  |  | 
|  | if (pdata->dws.dma_dev) { | 
|  | struct dw_dma_slave *dws = &pdata->dws; | 
|  | dma_cap_mask_t mask; | 
|  |  | 
|  | dws->tx_reg = regs->start + DAC_DATA; | 
|  |  | 
|  | dma_cap_zero(mask); | 
|  | dma_cap_set(DMA_SLAVE, mask); | 
|  |  | 
|  | dac->dma.chan = dma_request_channel(mask, filter, dws); | 
|  | } | 
|  | if (!pdata->dws.dma_dev || !dac->dma.chan) { | 
|  | dev_dbg(&pdev->dev, "DMA not available\n"); | 
|  | retval = -ENODEV; | 
|  | goto out_unset_card_dev; | 
|  | } | 
|  |  | 
|  | strcpy(card->driver, "Atmel ABDAC"); | 
|  | strcpy(card->shortname, "Atmel ABDAC"); | 
|  | sprintf(card->longname, "Atmel Audio Bitstream DAC"); | 
|  |  | 
|  | retval = atmel_abdac_pcm_new(dac); | 
|  | if (retval) { | 
|  | dev_dbg(&pdev->dev, "could not register ABDAC pcm device\n"); | 
|  | goto out_release_dma; | 
|  | } | 
|  |  | 
|  | retval = snd_card_register(card); | 
|  | if (retval) { | 
|  | dev_dbg(&pdev->dev, "could not register sound card\n"); | 
|  | goto out_release_dma; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, card); | 
|  |  | 
|  | dev_info(&pdev->dev, "Atmel ABDAC at 0x%p using %s\n", | 
|  | dac->regs, dev_name(&dac->dma.chan->dev->device)); | 
|  |  | 
|  | return retval; | 
|  |  | 
|  | out_release_dma: | 
|  | dma_release_channel(dac->dma.chan); | 
|  | dac->dma.chan = NULL; | 
|  | out_unset_card_dev: | 
|  | snd_card_set_dev(card, NULL); | 
|  | free_irq(irq, dac); | 
|  | out_unmap_regs: | 
|  | iounmap(dac->regs); | 
|  | out_free_card: | 
|  | snd_card_free(card); | 
|  | out_put_sample_clk: | 
|  | clk_put(sample_clk); | 
|  | clk_disable(pclk); | 
|  | out_put_pclk: | 
|  | clk_put(pclk); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int atmel_abdac_suspend(struct platform_device *pdev, pm_message_t msg) | 
|  | { | 
|  | struct snd_card *card = platform_get_drvdata(pdev); | 
|  | struct atmel_abdac *dac = card->private_data; | 
|  |  | 
|  | dw_dma_cyclic_stop(dac->dma.chan); | 
|  | clk_disable(dac->sample_clk); | 
|  | clk_disable(dac->pclk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int atmel_abdac_resume(struct platform_device *pdev) | 
|  | { | 
|  | struct snd_card *card = platform_get_drvdata(pdev); | 
|  | struct atmel_abdac *dac = card->private_data; | 
|  |  | 
|  | clk_enable(dac->pclk); | 
|  | clk_enable(dac->sample_clk); | 
|  | if (test_bit(DMA_READY, &dac->flags)) | 
|  | dw_dma_cyclic_start(dac->dma.chan); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define atmel_abdac_suspend NULL | 
|  | #define atmel_abdac_resume NULL | 
|  | #endif | 
|  |  | 
|  | static int __devexit atmel_abdac_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct snd_card *card = platform_get_drvdata(pdev); | 
|  | struct atmel_abdac *dac = get_dac(card); | 
|  |  | 
|  | clk_put(dac->sample_clk); | 
|  | clk_disable(dac->pclk); | 
|  | clk_put(dac->pclk); | 
|  |  | 
|  | dma_release_channel(dac->dma.chan); | 
|  | dac->dma.chan = NULL; | 
|  | snd_card_set_dev(card, NULL); | 
|  | iounmap(dac->regs); | 
|  | free_irq(dac->irq, dac); | 
|  | snd_card_free(card); | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver atmel_abdac_driver = { | 
|  | .remove		= __devexit_p(atmel_abdac_remove), | 
|  | .driver		= { | 
|  | .name	= "atmel_abdac", | 
|  | }, | 
|  | .suspend	= atmel_abdac_suspend, | 
|  | .resume		= atmel_abdac_resume, | 
|  | }; | 
|  |  | 
|  | static int __init atmel_abdac_init(void) | 
|  | { | 
|  | return platform_driver_probe(&atmel_abdac_driver, | 
|  | atmel_abdac_probe); | 
|  | } | 
|  | module_init(atmel_abdac_init); | 
|  |  | 
|  | static void __exit atmel_abdac_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&atmel_abdac_driver); | 
|  | } | 
|  | module_exit(atmel_abdac_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)"); | 
|  | MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>"); |