drivers/acpi/acpica/exfield.c - arm/linux-arm64-legacy - Git at Google

 /******************************************************************************
  *
  * Module Name: exfield - ACPI AML (p-code) execution - field manipulation
  *
  *****************************************************************************/

 /*
  * Copyright (C) 2000 - 2014, Intel Corp.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions, and the following disclaimer,
  *    without modification.
  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  *    substantially similar to the "NO WARRANTY" disclaimer below
  *    ("Disclaimer") and any redistribution must be conditioned upon
  *    including a substantially similar Disclaimer requirement for further
  *    binary redistribution.
  * 3. Neither the names of the above-listed copyright holders nor the names
  *    of any contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * Alternatively, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") version 2 as published by the Free
  * Software Foundation.
  *
  * NO WARRANTY
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  */

 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acdispat.h"
 #include "acinterp.h"
 #include "amlcode.h"

 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exfield")

 /* Local prototypes */
 static u32
 acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length);

 /*******************************************************************************
  *
  * FUNCTION:    acpi_get_serial_access_bytes
  *
  * PARAMETERS:  accessor_type   - The type of the protocol indicated by region
  *                                field access attributes
  *              access_length   - The access length of the region field
  *
  * RETURN:      Decoded access length
  *
  * DESCRIPTION: This routine returns the length of the generic_serial_bus
  *              protocol bytes
  *
  ******************************************************************************/

 static u32
 acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length)
 {
 	u32 length;

 	switch (accessor_type) {
 	case AML_FIELD_ATTRIB_QUICK:

 		length = 0;
 		break;

 	case AML_FIELD_ATTRIB_SEND_RCV:
 	case AML_FIELD_ATTRIB_BYTE:

 		length = 1;
 		break;

 	case AML_FIELD_ATTRIB_WORD:
 	case AML_FIELD_ATTRIB_WORD_CALL:

 		length = 2;
 		break;

 	case AML_FIELD_ATTRIB_MULTIBYTE:
 	case AML_FIELD_ATTRIB_RAW_BYTES:
 	case AML_FIELD_ATTRIB_RAW_PROCESS:

 		length = access_length;
 		break;

 	case AML_FIELD_ATTRIB_BLOCK:
 	case AML_FIELD_ATTRIB_BLOCK_CALL:
 	default:

 		length = ACPI_GSBUS_BUFFER_SIZE;
 		break;
 	}

 	return (length);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_read_data_from_field
  *
  * PARAMETERS:  walk_state          - Current execution state
  *              obj_desc            - The named field
  *              ret_buffer_desc     - Where the return data object is stored
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Read from a named field. Returns either an Integer or a
  *              Buffer, depending on the size of the field.
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_read_data_from_field(struct acpi_walk_state * walk_state,
 			     union acpi_operand_object *obj_desc,
 			     union acpi_operand_object **ret_buffer_desc)
 {
 	acpi_status status;
 	union acpi_operand_object *buffer_desc;
 	acpi_size length;
 	void *buffer;
 	u32 function;
 	u16 accessor_type;

 	ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);

 	/* Parameter validation */

 	if (!obj_desc) {
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
 	}
 	if (!ret_buffer_desc) {
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}

 	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
 		/*
 		 * If the buffer_field arguments have not been previously evaluated,
 		 * evaluate them now and save the results.
 		 */
 		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
 			status = acpi_ds_get_buffer_field_arguments(obj_desc);
 			if (ACPI_FAILURE(status)) {
 				return_ACPI_STATUS(status);
 			}
 		}
 	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
 		   (obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_SMBUS
 		    || obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_GSBUS
 		    || obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_IPMI)) {
 		/*
 		 * This is an SMBus, GSBus or IPMI read. We must create a buffer to hold
 		 * the data and then directly access the region handler.
 		 *
 		 * Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function
 		 */
 		if (obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_SMBUS) {
 			length = ACPI_SMBUS_BUFFER_SIZE;
 			function =
 			    ACPI_READ | (obj_desc->field.attribute << 16);
 		} else if (obj_desc->field.region_obj->region.space_id ==
 			   ACPI_ADR_SPACE_GSBUS) {
 			accessor_type = obj_desc->field.attribute;
 			length = acpi_ex_get_serial_access_length(accessor_type,
 								  obj_desc->
 								  field.
 								  access_length);

 			/*
 			 * Add additional 2 bytes for modeled generic_serial_bus data buffer:
 			 * typedef struct {
 			 *     BYTEStatus; // Byte 0 of the data buffer
 			 *     BYTELength; // Byte 1 of the data buffer
 			 *     BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
 			 * }
 			 */
 			length += 2;
 			function = ACPI_READ | (accessor_type << 16);
 		} else {	/* IPMI */

 			length = ACPI_IPMI_BUFFER_SIZE;
 			function = ACPI_READ;
 		}

 		buffer_desc = acpi_ut_create_buffer_object(length);
 		if (!buffer_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}

 		/* Lock entire transaction if requested */

 		acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

 		/* Call the region handler for the read */

 		status = acpi_ex_access_region(obj_desc, 0,
 					       ACPI_CAST_PTR(u64,
 							     buffer_desc->
 							     buffer.pointer),
 					       function);
 		acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
 		goto exit;
 	}

 	/*
 	 * Allocate a buffer for the contents of the field.
 	 *
 	 * If the field is larger than the current integer width, create
 	 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
 	 * the use of arithmetic operators on the returned value if the
 	 * field size is equal or smaller than an Integer.
 	 *
 	 * Note: Field.length is in bits.
 	 */
 	length =
 	    (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length);
 	if (length > acpi_gbl_integer_byte_width) {

 		/* Field is too large for an Integer, create a Buffer instead */

 		buffer_desc = acpi_ut_create_buffer_object(length);
 		if (!buffer_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 		buffer = buffer_desc->buffer.pointer;
 	} else {
 		/* Field will fit within an Integer (normal case) */

 		buffer_desc = acpi_ut_create_integer_object((u64) 0);
 		if (!buffer_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}

 		length = acpi_gbl_integer_byte_width;
 		buffer = &buffer_desc->integer.value;
 	}

 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 			  "FieldRead [TO]:   Obj %p, Type %X, Buf %p, ByteLen %X\n",
 			  obj_desc, obj_desc->common.type, buffer,
 			  (u32) length));
 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 			  "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
 			  obj_desc->common_field.bit_length,
 			  obj_desc->common_field.start_field_bit_offset,
 			  obj_desc->common_field.base_byte_offset));

 	/* Lock entire transaction if requested */

 	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

 	/* Read from the field */

 	status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length);
 	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);

 exit:
 	if (ACPI_FAILURE(status)) {
 		acpi_ut_remove_reference(buffer_desc);
 	} else {
 		*ret_buffer_desc = buffer_desc;
 	}

 	return_ACPI_STATUS(status);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_write_data_to_field
  *
  * PARAMETERS:  source_desc         - Contains data to write
  *              obj_desc            - The named field
  *              result_desc         - Where the return value is returned, if any
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Write to a named field
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
 			    union acpi_operand_object *obj_desc,
 			    union acpi_operand_object **result_desc)
 {
 	acpi_status status;
 	u32 length;
 	void *buffer;
 	union acpi_operand_object *buffer_desc;
 	u32 function;
 	u16 accessor_type;

 	ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);

 	/* Parameter validation */

 	if (!source_desc || !obj_desc) {
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
 	}

 	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
 		/*
 		 * If the buffer_field arguments have not been previously evaluated,
 		 * evaluate them now and save the results.
 		 */
 		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
 			status = acpi_ds_get_buffer_field_arguments(obj_desc);
 			if (ACPI_FAILURE(status)) {
 				return_ACPI_STATUS(status);
 			}
 		}
 	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
 		   (obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_SMBUS
 		    || obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_GSBUS
 		    || obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_IPMI)) {
 		/*
 		 * This is an SMBus, GSBus or IPMI write. We will bypass the entire field
 		 * mechanism and handoff the buffer directly to the handler. For
 		 * these address spaces, the buffer is bi-directional; on a write,
 		 * return data is returned in the same buffer.
 		 *
 		 * Source must be a buffer of sufficient size:
 		 * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
 		 *
 		 * Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function
 		 */
 		if (source_desc->common.type != ACPI_TYPE_BUFFER) {
 			ACPI_ERROR((AE_INFO,
 				    "SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s",
 				    acpi_ut_get_object_type_name(source_desc)));

 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}

 		if (obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_SMBUS) {
 			length = ACPI_SMBUS_BUFFER_SIZE;
 			function =
 			    ACPI_WRITE | (obj_desc->field.attribute << 16);
 		} else if (obj_desc->field.region_obj->region.space_id ==
 			   ACPI_ADR_SPACE_GSBUS) {
 			accessor_type = obj_desc->field.attribute;
 			length = acpi_ex_get_serial_access_length(accessor_type,
 								  obj_desc->
 								  field.
 								  access_length);

 			/*
 			 * Add additional 2 bytes for modeled generic_serial_bus data buffer:
 			 * typedef struct {
 			 *     BYTEStatus; // Byte 0 of the data buffer
 			 *     BYTELength; // Byte 1 of the data buffer
 			 *     BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
 			 * }
 			 */
 			length += 2;
 			function = ACPI_WRITE | (accessor_type << 16);
 		} else {	/* IPMI */

 			length = ACPI_IPMI_BUFFER_SIZE;
 			function = ACPI_WRITE;
 		}

 		if (source_desc->buffer.length < length) {
 			ACPI_ERROR((AE_INFO,
 				    "SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u",
 				    length, source_desc->buffer.length));

 			return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
 		}

 		/* Create the bi-directional buffer */

 		buffer_desc = acpi_ut_create_buffer_object(length);
 		if (!buffer_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}

 		buffer = buffer_desc->buffer.pointer;
 		ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length);

 		/* Lock entire transaction if requested */

 		acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

 		/*
 		 * Perform the write (returns status and perhaps data in the
 		 * same buffer)
 		 */
 		status = acpi_ex_access_region(obj_desc, 0,
 					       (u64 *) buffer, function);
 		acpi_ex_release_global_lock(obj_desc->common_field.field_flags);

 		*result_desc = buffer_desc;
 		return_ACPI_STATUS(status);
 	}

 	/* Get a pointer to the data to be written */

 	switch (source_desc->common.type) {
 	case ACPI_TYPE_INTEGER:

 		buffer = &source_desc->integer.value;
 		length = sizeof(source_desc->integer.value);
 		break;

 	case ACPI_TYPE_BUFFER:

 		buffer = source_desc->buffer.pointer;
 		length = source_desc->buffer.length;
 		break;

 	case ACPI_TYPE_STRING:

 		buffer = source_desc->string.pointer;
 		length = source_desc->string.length;
 		break;

 	default:

 		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 	}

 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 			  "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
 			  source_desc,
 			  acpi_ut_get_type_name(source_desc->common.type),
 			  source_desc->common.type, buffer, length));

 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 			  "FieldWrite [TO]:   Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
 			  obj_desc,
 			  acpi_ut_get_type_name(obj_desc->common.type),
 			  obj_desc->common.type,
 			  obj_desc->common_field.bit_length,
 			  obj_desc->common_field.start_field_bit_offset,
 			  obj_desc->common_field.base_byte_offset));

 	/* Lock entire transaction if requested */

 	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

 	/* Write to the field */

 	status = acpi_ex_insert_into_field(obj_desc, buffer, length);
 	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);

 	return_ACPI_STATUS(status);
 }
	/******************************************************************************
	*
	* Module Name: exfield - ACPI AML (p-code) execution - field manipulation
	*
	*****************************************************************************/

	/*
	* Copyright (C) 2000 - 2014, Intel Corp.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions, and the following disclaimer,
	* without modification.
	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
	* substantially similar to the "NO WARRANTY" disclaimer below
	* ("Disclaimer") and any redistribution must be conditioned upon
	* including a substantially similar Disclaimer requirement for further
	* binary redistribution.
	* 3. Neither the names of the above-listed copyright holders nor the names
	* of any contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* Alternatively, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") version 2 as published by the Free
	* Software Foundation.
	*
	* NO WARRANTY
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
	* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGES.
	*/

	#include <acpi/acpi.h>
	#include "accommon.h"
	#include "acdispat.h"
	#include "acinterp.h"
	#include "amlcode.h"

	#define _COMPONENT ACPI_EXECUTER
	ACPI_MODULE_NAME("exfield")

	/* Local prototypes */
	static u32
	acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length);

	/*******************************************************************************
	*
	* FUNCTION: acpi_get_serial_access_bytes
	*
	* PARAMETERS: accessor_type - The type of the protocol indicated by region
	* field access attributes
	* access_length - The access length of the region field
	*
	* RETURN: Decoded access length
	*
	* DESCRIPTION: This routine returns the length of the generic_serial_bus
	* protocol bytes
	*
	******************************************************************************/

	static u32
	acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length)
	{
	u32 length;

	switch (accessor_type) {
	case AML_FIELD_ATTRIB_QUICK:

	length = 0;
	break;

	case AML_FIELD_ATTRIB_SEND_RCV:
	case AML_FIELD_ATTRIB_BYTE:

	length = 1;
	break;

	case AML_FIELD_ATTRIB_WORD:
	case AML_FIELD_ATTRIB_WORD_CALL:

	length = 2;
	break;

	case AML_FIELD_ATTRIB_MULTIBYTE:
	case AML_FIELD_ATTRIB_RAW_BYTES:
	case AML_FIELD_ATTRIB_RAW_PROCESS:

	length = access_length;
	break;

	case AML_FIELD_ATTRIB_BLOCK:
	case AML_FIELD_ATTRIB_BLOCK_CALL:
	default:

	length = ACPI_GSBUS_BUFFER_SIZE;
	break;
	}

	return (length);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_read_data_from_field
	*
	* PARAMETERS: walk_state - Current execution state
	* obj_desc - The named field
	* ret_buffer_desc - Where the return data object is stored
	*
	* RETURN: Status
	*
	* DESCRIPTION: Read from a named field. Returns either an Integer or a
	* Buffer, depending on the size of the field.
	*
	******************************************************************************/

	acpi_status
	acpi_ex_read_data_from_field(struct acpi_walk_state * walk_state,
	union acpi_operand_object *obj_desc,
	union acpi_operand_object **ret_buffer_desc)
	{
	acpi_status status;
	union acpi_operand_object *buffer_desc;
	acpi_size length;
	void *buffer;
	u32 function;
	u16 accessor_type;

	ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);

	/* Parameter validation */

	if (!obj_desc) {
	return_ACPI_STATUS(AE_AML_NO_OPERAND);
	}
	if (!ret_buffer_desc) {
	return_ACPI_STATUS(AE_BAD_PARAMETER);
	}

	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
	/*
	* If the buffer_field arguments have not been previously evaluated,
	* evaluate them now and save the results.
	*/
	if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
	status = acpi_ds_get_buffer_field_arguments(obj_desc);
	if (ACPI_FAILURE(status)) {
	return_ACPI_STATUS(status);
	}
	}
	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
	(obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_SMBUS
	\|\| obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_GSBUS
	\|\| obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_IPMI)) {
	/*
	* This is an SMBus, GSBus or IPMI read. We must create a buffer to hold
	* the data and then directly access the region handler.
	*
	* Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function
	*/
	if (obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_SMBUS) {
	length = ACPI_SMBUS_BUFFER_SIZE;
	function =
	ACPI_READ \| (obj_desc->field.attribute << 16);
	} else if (obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_GSBUS) {
	accessor_type = obj_desc->field.attribute;
	length = acpi_ex_get_serial_access_length(accessor_type,
	obj_desc->
	field.
	access_length);

	/*
	* Add additional 2 bytes for modeled generic_serial_bus data buffer:
	* typedef struct {
	* BYTEStatus; // Byte 0 of the data buffer
	* BYTELength; // Byte 1 of the data buffer
	* BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
	* }
	*/
	length += 2;
	function = ACPI_READ \| (accessor_type << 16);
	} else { /* IPMI */

	length = ACPI_IPMI_BUFFER_SIZE;
	function = ACPI_READ;
	}

	buffer_desc = acpi_ut_create_buffer_object(length);
	if (!buffer_desc) {
	return_ACPI_STATUS(AE_NO_MEMORY);
	}

	/* Lock entire transaction if requested */

	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

	/* Call the region handler for the read */

	status = acpi_ex_access_region(obj_desc, 0,
	ACPI_CAST_PTR(u64,
	buffer_desc->
	buffer.pointer),
	function);
	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
	goto exit;
	}

	/*
	* Allocate a buffer for the contents of the field.
	*
	* If the field is larger than the current integer width, create
	* a BUFFER to hold it. Otherwise, use an INTEGER. This allows
	* the use of arithmetic operators on the returned value if the
	* field size is equal or smaller than an Integer.
	*
	* Note: Field.length is in bits.
	*/
	length =
	(acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length);
	if (length > acpi_gbl_integer_byte_width) {

	/* Field is too large for an Integer, create a Buffer instead */

	buffer_desc = acpi_ut_create_buffer_object(length);
	if (!buffer_desc) {
	return_ACPI_STATUS(AE_NO_MEMORY);
	}
	buffer = buffer_desc->buffer.pointer;
	} else {
	/* Field will fit within an Integer (normal case) */

	buffer_desc = acpi_ut_create_integer_object((u64) 0);
	if (!buffer_desc) {
	return_ACPI_STATUS(AE_NO_MEMORY);
	}

	length = acpi_gbl_integer_byte_width;
	buffer = &buffer_desc->integer.value;
	}

	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
	"FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n",
	obj_desc, obj_desc->common.type, buffer,
	(u32) length));
	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
	"FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
	obj_desc->common_field.bit_length,
	obj_desc->common_field.start_field_bit_offset,
	obj_desc->common_field.base_byte_offset));

	/* Lock entire transaction if requested */

	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

	/* Read from the field */

	status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length);
	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);

	exit:
	if (ACPI_FAILURE(status)) {
	acpi_ut_remove_reference(buffer_desc);
	} else {
	*ret_buffer_desc = buffer_desc;
	}

	return_ACPI_STATUS(status);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_write_data_to_field
	*
	* PARAMETERS: source_desc - Contains data to write
	* obj_desc - The named field
	* result_desc - Where the return value is returned, if any
	*
	* RETURN: Status
	*
	* DESCRIPTION: Write to a named field
	*
	******************************************************************************/

	acpi_status
	acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
	union acpi_operand_object *obj_desc,
	union acpi_operand_object **result_desc)
	{
	acpi_status status;
	u32 length;
	void *buffer;
	union acpi_operand_object *buffer_desc;
	u32 function;
	u16 accessor_type;

	ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);

	/* Parameter validation */

	if (!source_desc \|\| !obj_desc) {
	return_ACPI_STATUS(AE_AML_NO_OPERAND);
	}

	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
	/*
	* If the buffer_field arguments have not been previously evaluated,
	* evaluate them now and save the results.
	*/
	if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
	status = acpi_ds_get_buffer_field_arguments(obj_desc);
	if (ACPI_FAILURE(status)) {
	return_ACPI_STATUS(status);
	}
	}
	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
	(obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_SMBUS
	\|\| obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_GSBUS
	\|\| obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_IPMI)) {
	/*
	* This is an SMBus, GSBus or IPMI write. We will bypass the entire field
	* mechanism and handoff the buffer directly to the handler. For
	* these address spaces, the buffer is bi-directional; on a write,
	* return data is returned in the same buffer.
	*
	* Source must be a buffer of sufficient size:
	* ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
	*
	* Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function
	*/
	if (source_desc->common.type != ACPI_TYPE_BUFFER) {
	ACPI_ERROR((AE_INFO,
	"SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s",
	acpi_ut_get_object_type_name(source_desc)));

	return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
	}

	if (obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_SMBUS) {
	length = ACPI_SMBUS_BUFFER_SIZE;
	function =
	ACPI_WRITE \| (obj_desc->field.attribute << 16);
	} else if (obj_desc->field.region_obj->region.space_id ==
	ACPI_ADR_SPACE_GSBUS) {
	accessor_type = obj_desc->field.attribute;
	length = acpi_ex_get_serial_access_length(accessor_type,
	obj_desc->
	field.
	access_length);

	/*
	* Add additional 2 bytes for modeled generic_serial_bus data buffer:
	* typedef struct {
	* BYTEStatus; // Byte 0 of the data buffer
	* BYTELength; // Byte 1 of the data buffer
	* BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
	* }
	*/
	length += 2;
	function = ACPI_WRITE \| (accessor_type << 16);
	} else { /* IPMI */

	length = ACPI_IPMI_BUFFER_SIZE;
	function = ACPI_WRITE;
	}

	if (source_desc->buffer.length < length) {
	ACPI_ERROR((AE_INFO,
	"SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u",
	length, source_desc->buffer.length));

	return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
	}

	/* Create the bi-directional buffer */

	buffer_desc = acpi_ut_create_buffer_object(length);
	if (!buffer_desc) {
	return_ACPI_STATUS(AE_NO_MEMORY);
	}

	buffer = buffer_desc->buffer.pointer;
	ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length);

	/* Lock entire transaction if requested */

	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

	/*
	* Perform the write (returns status and perhaps data in the
	* same buffer)
	*/
	status = acpi_ex_access_region(obj_desc, 0,
	(u64 *) buffer, function);
	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);

	*result_desc = buffer_desc;
	return_ACPI_STATUS(status);
	}

	/* Get a pointer to the data to be written */

	switch (source_desc->common.type) {
	case ACPI_TYPE_INTEGER:

	buffer = &source_desc->integer.value;
	length = sizeof(source_desc->integer.value);
	break;

	case ACPI_TYPE_BUFFER:

	buffer = source_desc->buffer.pointer;
	length = source_desc->buffer.length;
	break;

	case ACPI_TYPE_STRING:

	buffer = source_desc->string.pointer;
	length = source_desc->string.length;
	break;

	default:

	return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
	}

	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
	"FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
	source_desc,
	acpi_ut_get_type_name(source_desc->common.type),
	source_desc->common.type, buffer, length));

	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
	"FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
	obj_desc,
	acpi_ut_get_type_name(obj_desc->common.type),
	obj_desc->common.type,
	obj_desc->common_field.bit_length,
	obj_desc->common_field.start_field_bit_offset,
	obj_desc->common_field.base_byte_offset));

	/* Lock entire transaction if requested */

	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);

	/* Write to the field */

	status = acpi_ex_insert_into_field(obj_desc, buffer, length);
	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);

	return_ACPI_STATUS(status);
	}