| /* |
| * cpcihp_generic.c |
| * |
| * Generic port I/O CompactPCI driver |
| * |
| * Copyright 2002 SOMA Networks, Inc. |
| * Copyright 2001 Intel San Luis Obispo |
| * Copyright 2000,2001 MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY |
| * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL |
| * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * This generic CompactPCI hotplug driver should allow using the PCI hotplug |
| * mechanism on any CompactPCI board that exposes the #ENUM signal as a bit |
| * in a system register that can be read through standard port I/O. |
| * |
| * Send feedback to <scottm@somanetworks.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include "cpci_hotplug.h" |
| |
| #define DRIVER_VERSION "0.1" |
| #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" |
| #define DRIVER_DESC "Generic port I/O CompactPCI Hot Plug Driver" |
| |
| #if !defined(MODULE) |
| #define MY_NAME "cpcihp_generic" |
| #else |
| #define MY_NAME THIS_MODULE->name |
| #endif |
| |
| #define dbg(format, arg...) \ |
| do { \ |
| if (debug) \ |
| printk (KERN_DEBUG "%s: " format "\n", \ |
| MY_NAME , ## arg); \ |
| } while(0) |
| #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) |
| #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) |
| #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) |
| |
| /* local variables */ |
| static bool debug; |
| static char *bridge; |
| static u8 bridge_busnr; |
| static u8 bridge_slot; |
| static struct pci_bus *bus; |
| static u8 first_slot; |
| static u8 last_slot; |
| static u16 port; |
| static unsigned int enum_bit; |
| static u8 enum_mask; |
| |
| static struct cpci_hp_controller_ops generic_hpc_ops; |
| static struct cpci_hp_controller generic_hpc; |
| |
| static int __init validate_parameters(void) |
| { |
| char *str; |
| char *p; |
| unsigned long tmp; |
| |
| if(!bridge) { |
| info("not configured, disabling."); |
| return -EINVAL; |
| } |
| str = bridge; |
| if(!*str) |
| return -EINVAL; |
| |
| tmp = simple_strtoul(str, &p, 16); |
| if(p == str || tmp > 0xff) { |
| err("Invalid hotplug bus bridge device bus number"); |
| return -EINVAL; |
| } |
| bridge_busnr = (u8) tmp; |
| dbg("bridge_busnr = 0x%02x", bridge_busnr); |
| if(*p != ':') { |
| err("Invalid hotplug bus bridge device"); |
| return -EINVAL; |
| } |
| str = p + 1; |
| tmp = simple_strtoul(str, &p, 16); |
| if(p == str || tmp > 0x1f) { |
| err("Invalid hotplug bus bridge device slot number"); |
| return -EINVAL; |
| } |
| bridge_slot = (u8) tmp; |
| dbg("bridge_slot = 0x%02x", bridge_slot); |
| |
| dbg("first_slot = 0x%02x", first_slot); |
| dbg("last_slot = 0x%02x", last_slot); |
| if(!(first_slot && last_slot)) { |
| err("Need to specify first_slot and last_slot"); |
| return -EINVAL; |
| } |
| if(last_slot < first_slot) { |
| err("first_slot must be less than last_slot"); |
| return -EINVAL; |
| } |
| |
| dbg("port = 0x%04x", port); |
| dbg("enum_bit = 0x%02x", enum_bit); |
| if(enum_bit > 7) { |
| err("Invalid #ENUM bit"); |
| return -EINVAL; |
| } |
| enum_mask = 1 << enum_bit; |
| return 0; |
| } |
| |
| static int query_enum(void) |
| { |
| u8 value; |
| |
| value = inb_p(port); |
| return ((value & enum_mask) == enum_mask); |
| } |
| |
| static int __init cpcihp_generic_init(void) |
| { |
| int status; |
| struct resource *r; |
| struct pci_dev *dev; |
| |
| info(DRIVER_DESC " version: " DRIVER_VERSION); |
| status = validate_parameters(); |
| if (status) |
| return status; |
| |
| r = request_region(port, 1, "#ENUM hotswap signal register"); |
| if(!r) |
| return -EBUSY; |
| |
| dev = pci_get_domain_bus_and_slot(0, bridge_busnr, |
| PCI_DEVFN(bridge_slot, 0)); |
| if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { |
| err("Invalid bridge device %s", bridge); |
| pci_dev_put(dev); |
| return -EINVAL; |
| } |
| bus = dev->subordinate; |
| pci_dev_put(dev); |
| |
| memset(&generic_hpc, 0, sizeof (struct cpci_hp_controller)); |
| generic_hpc_ops.query_enum = query_enum; |
| generic_hpc.ops = &generic_hpc_ops; |
| |
| status = cpci_hp_register_controller(&generic_hpc); |
| if(status != 0) { |
| err("Could not register cPCI hotplug controller"); |
| return -ENODEV; |
| } |
| dbg("registered controller"); |
| |
| status = cpci_hp_register_bus(bus, first_slot, last_slot); |
| if(status != 0) { |
| err("Could not register cPCI hotplug bus"); |
| goto init_bus_register_error; |
| } |
| dbg("registered bus"); |
| |
| status = cpci_hp_start(); |
| if(status != 0) { |
| err("Could not started cPCI hotplug system"); |
| goto init_start_error; |
| } |
| dbg("started cpci hp system"); |
| return 0; |
| init_start_error: |
| cpci_hp_unregister_bus(bus); |
| init_bus_register_error: |
| cpci_hp_unregister_controller(&generic_hpc); |
| err("status = %d", status); |
| return status; |
| |
| } |
| |
| static void __exit cpcihp_generic_exit(void) |
| { |
| cpci_hp_stop(); |
| cpci_hp_unregister_bus(bus); |
| cpci_hp_unregister_controller(&generic_hpc); |
| release_region(port, 1); |
| } |
| |
| module_init(cpcihp_generic_init); |
| module_exit(cpcihp_generic_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| module_param(debug, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); |
| module_param(bridge, charp, 0); |
| MODULE_PARM_DESC(bridge, "Hotswap bus bridge device, <bus>:<slot> (bus and slot are in hexadecimal)"); |
| module_param(first_slot, byte, 0); |
| MODULE_PARM_DESC(first_slot, "Hotswap bus first slot number"); |
| module_param(last_slot, byte, 0); |
| MODULE_PARM_DESC(last_slot, "Hotswap bus last slot number"); |
| module_param(port, ushort, 0); |
| MODULE_PARM_DESC(port, "#ENUM signal I/O port"); |
| module_param(enum_bit, uint, 0); |
| MODULE_PARM_DESC(enum_bit, "#ENUM signal bit (0-7)"); |