| /* |
| * PCI Express PCI Hot Plug Driver |
| * |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * Copyright (C) 2003-2004 Intel Corporation |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/signal.h> |
| #include <linux/jiffies.h> |
| #include <linux/timer.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/time.h> |
| #include <linux/slab.h> |
| |
| #include "../pci.h" |
| #include "pciehp.h" |
| |
| static inline struct pci_dev *ctrl_dev(struct controller *ctrl) |
| { |
| return ctrl->pcie->port; |
| } |
| |
| static irqreturn_t pcie_isr(int irq, void *dev_id); |
| static void start_int_poll_timer(struct controller *ctrl, int sec); |
| |
| /* This is the interrupt polling timeout function. */ |
| static void int_poll_timeout(unsigned long data) |
| { |
| struct controller *ctrl = (struct controller *)data; |
| |
| /* Poll for interrupt events. regs == NULL => polling */ |
| pcie_isr(0, ctrl); |
| |
| init_timer(&ctrl->poll_timer); |
| if (!pciehp_poll_time) |
| pciehp_poll_time = 2; /* default polling interval is 2 sec */ |
| |
| start_int_poll_timer(ctrl, pciehp_poll_time); |
| } |
| |
| /* This function starts the interrupt polling timer. */ |
| static void start_int_poll_timer(struct controller *ctrl, int sec) |
| { |
| /* Clamp to sane value */ |
| if ((sec <= 0) || (sec > 60)) |
| sec = 2; |
| |
| ctrl->poll_timer.function = &int_poll_timeout; |
| ctrl->poll_timer.data = (unsigned long)ctrl; |
| ctrl->poll_timer.expires = jiffies + sec * HZ; |
| add_timer(&ctrl->poll_timer); |
| } |
| |
| static inline int pciehp_request_irq(struct controller *ctrl) |
| { |
| int retval, irq = ctrl->pcie->irq; |
| |
| /* Install interrupt polling timer. Start with 10 sec delay */ |
| if (pciehp_poll_mode) { |
| init_timer(&ctrl->poll_timer); |
| start_int_poll_timer(ctrl, 10); |
| return 0; |
| } |
| |
| /* Installs the interrupt handler */ |
| retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl); |
| if (retval) |
| ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n", |
| irq); |
| return retval; |
| } |
| |
| static inline void pciehp_free_irq(struct controller *ctrl) |
| { |
| if (pciehp_poll_mode) |
| del_timer_sync(&ctrl->poll_timer); |
| else |
| free_irq(ctrl->pcie->irq, ctrl); |
| } |
| |
| static int pcie_poll_cmd(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| int timeout = 1000; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| if (slot_status & PCI_EXP_SLTSTA_CC) { |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_CC); |
| return 1; |
| } |
| while (timeout > 0) { |
| msleep(10); |
| timeout -= 10; |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| if (slot_status & PCI_EXP_SLTSTA_CC) { |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_CC); |
| return 1; |
| } |
| } |
| return 0; /* timeout */ |
| } |
| |
| static void pcie_wait_cmd(struct controller *ctrl, int poll) |
| { |
| unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; |
| unsigned long timeout = msecs_to_jiffies(msecs); |
| int rc; |
| |
| if (poll) |
| rc = pcie_poll_cmd(ctrl); |
| else |
| rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); |
| if (!rc) |
| ctrl_dbg(ctrl, "Command not completed in 1000 msec\n"); |
| } |
| |
| /** |
| * pcie_write_cmd - Issue controller command |
| * @ctrl: controller to which the command is issued |
| * @cmd: command value written to slot control register |
| * @mask: bitmask of slot control register to be modified |
| */ |
| static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| u16 slot_ctrl; |
| |
| mutex_lock(&ctrl->ctrl_lock); |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| if (slot_status & PCI_EXP_SLTSTA_CC) { |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_CC); |
| if (!ctrl->no_cmd_complete) { |
| /* |
| * After 1 sec and CMD_COMPLETED still not set, just |
| * proceed forward to issue the next command according |
| * to spec. Just print out the error message. |
| */ |
| ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n"); |
| } else if (!NO_CMD_CMPL(ctrl)) { |
| /* |
| * This controller seems to notify of command completed |
| * event even though it supports none of power |
| * controller, attention led, power led and EMI. |
| */ |
| ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to wait for command completed event\n"); |
| ctrl->no_cmd_complete = 0; |
| } else { |
| ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe the controller is broken\n"); |
| } |
| } |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| slot_ctrl &= ~mask; |
| slot_ctrl |= (cmd & mask); |
| ctrl->cmd_busy = 1; |
| smp_mb(); |
| pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl); |
| |
| /* |
| * Wait for command completion. |
| */ |
| if (!ctrl->no_cmd_complete) { |
| int poll = 0; |
| /* |
| * if hotplug interrupt is not enabled or command |
| * completed interrupt is not enabled, we need to poll |
| * command completed event. |
| */ |
| if (!(slot_ctrl & PCI_EXP_SLTCTL_HPIE) || |
| !(slot_ctrl & PCI_EXP_SLTCTL_CCIE)) |
| poll = 1; |
| pcie_wait_cmd(ctrl, poll); |
| } |
| mutex_unlock(&ctrl->ctrl_lock); |
| } |
| |
| bool pciehp_check_link_active(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 lnk_status; |
| bool ret; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); |
| ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); |
| |
| if (ret) |
| ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); |
| |
| return ret; |
| } |
| |
| static void __pcie_wait_link_active(struct controller *ctrl, bool active) |
| { |
| int timeout = 1000; |
| |
| if (pciehp_check_link_active(ctrl) == active) |
| return; |
| while (timeout > 0) { |
| msleep(10); |
| timeout -= 10; |
| if (pciehp_check_link_active(ctrl) == active) |
| return; |
| } |
| ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n", |
| active ? "set" : "cleared"); |
| } |
| |
| static void pcie_wait_link_active(struct controller *ctrl) |
| { |
| __pcie_wait_link_active(ctrl, true); |
| } |
| |
| static bool pci_bus_check_dev(struct pci_bus *bus, int devfn) |
| { |
| u32 l; |
| int count = 0; |
| int delay = 1000, step = 20; |
| bool found = false; |
| |
| do { |
| found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0); |
| count++; |
| |
| if (found) |
| break; |
| |
| msleep(step); |
| delay -= step; |
| } while (delay > 0); |
| |
| if (count > 1 && pciehp_debug) |
| printk(KERN_DEBUG "pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n", |
| pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), |
| PCI_FUNC(devfn), count, step, l); |
| |
| return found; |
| } |
| |
| int pciehp_check_link_status(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| bool found; |
| u16 lnk_status; |
| |
| /* |
| * Data Link Layer Link Active Reporting must be capable for |
| * hot-plug capable downstream port. But old controller might |
| * not implement it. In this case, we wait for 1000 ms. |
| */ |
| if (ctrl->link_active_reporting) |
| pcie_wait_link_active(ctrl); |
| else |
| msleep(1000); |
| |
| /* wait 100ms before read pci conf, and try in 1s */ |
| msleep(100); |
| found = pci_bus_check_dev(ctrl->pcie->port->subordinate, |
| PCI_DEVFN(0, 0)); |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); |
| ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); |
| if ((lnk_status & PCI_EXP_LNKSTA_LT) || |
| !(lnk_status & PCI_EXP_LNKSTA_NLW)) { |
| ctrl_err(ctrl, "Link Training Error occurs\n"); |
| return -1; |
| } |
| |
| pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); |
| |
| if (!found) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int __pciehp_link_set(struct controller *ctrl, bool enable) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 lnk_ctrl; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &lnk_ctrl); |
| |
| if (enable) |
| lnk_ctrl &= ~PCI_EXP_LNKCTL_LD; |
| else |
| lnk_ctrl |= PCI_EXP_LNKCTL_LD; |
| |
| pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, lnk_ctrl); |
| ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl); |
| return 0; |
| } |
| |
| static int pciehp_link_enable(struct controller *ctrl) |
| { |
| return __pciehp_link_set(ctrl, true); |
| } |
| |
| void pciehp_get_attention_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_ctrl; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl); |
| |
| switch (slot_ctrl & PCI_EXP_SLTCTL_AIC) { |
| case PCI_EXP_SLTCTL_ATTN_IND_ON: |
| *status = 1; /* On */ |
| break; |
| case PCI_EXP_SLTCTL_ATTN_IND_BLINK: |
| *status = 2; /* Blink */ |
| break; |
| case PCI_EXP_SLTCTL_ATTN_IND_OFF: |
| *status = 0; /* Off */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| } |
| |
| void pciehp_get_power_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_ctrl; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl); |
| |
| switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) { |
| case PCI_EXP_SLTCTL_PWR_ON: |
| *status = 1; /* On */ |
| break; |
| case PCI_EXP_SLTCTL_PWR_OFF: |
| *status = 0; /* Off */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| } |
| |
| void pciehp_get_latch_status(struct slot *slot, u8 *status) |
| { |
| struct pci_dev *pdev = ctrl_dev(slot->ctrl); |
| u16 slot_status; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| *status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS); |
| } |
| |
| void pciehp_get_adapter_status(struct slot *slot, u8 *status) |
| { |
| struct pci_dev *pdev = ctrl_dev(slot->ctrl); |
| u16 slot_status; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| *status = !!(slot_status & PCI_EXP_SLTSTA_PDS); |
| } |
| |
| int pciehp_query_power_fault(struct slot *slot) |
| { |
| struct pci_dev *pdev = ctrl_dev(slot->ctrl); |
| u16 slot_status; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| return !!(slot_status & PCI_EXP_SLTSTA_PFD); |
| } |
| |
| void pciehp_set_attention_status(struct slot *slot, u8 value) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| |
| if (!ATTN_LED(ctrl)) |
| return; |
| |
| switch (value) { |
| case 0: /* turn off */ |
| slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_OFF; |
| break; |
| case 1: /* turn on */ |
| slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_ON; |
| break; |
| case 2: /* turn blink */ |
| slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_BLINK; |
| break; |
| default: |
| return; |
| } |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); |
| pcie_write_cmd(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC); |
| } |
| |
| void pciehp_green_led_on(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| |
| if (!PWR_LED(ctrl)) |
| return; |
| |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON, PCI_EXP_SLTCTL_PIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_IND_ON); |
| } |
| |
| void pciehp_green_led_off(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| |
| if (!PWR_LED(ctrl)) |
| return; |
| |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF, PCI_EXP_SLTCTL_PIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_IND_OFF); |
| } |
| |
| void pciehp_green_led_blink(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| |
| if (!PWR_LED(ctrl)) |
| return; |
| |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK, PCI_EXP_SLTCTL_PIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_IND_BLINK); |
| } |
| |
| int pciehp_power_on_slot(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| int retval; |
| |
| /* Clear sticky power-fault bit from previous power failures */ |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| if (slot_status & PCI_EXP_SLTSTA_PFD) |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_PFD); |
| ctrl->power_fault_detected = 0; |
| |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_ON); |
| |
| retval = pciehp_link_enable(ctrl); |
| if (retval) |
| ctrl_err(ctrl, "%s: Can not enable the link!\n", __func__); |
| |
| return retval; |
| } |
| |
| void pciehp_power_off_slot(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_OFF); |
| } |
| |
| static irqreturn_t pcie_isr(int irq, void *dev_id) |
| { |
| struct controller *ctrl = (struct controller *)dev_id; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| struct slot *slot = ctrl->slot; |
| u16 detected, intr_loc; |
| |
| /* |
| * In order to guarantee that all interrupt events are |
| * serviced, we need to re-inspect Slot Status register after |
| * clearing what is presumed to be the last pending interrupt. |
| */ |
| intr_loc = 0; |
| do { |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &detected); |
| |
| detected &= (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | |
| PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | |
| PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC); |
| detected &= ~intr_loc; |
| intr_loc |= detected; |
| if (!intr_loc) |
| return IRQ_NONE; |
| if (detected) |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| intr_loc); |
| } while (detected); |
| |
| ctrl_dbg(ctrl, "%s: intr_loc %x\n", __func__, intr_loc); |
| |
| /* Check Command Complete Interrupt Pending */ |
| if (intr_loc & PCI_EXP_SLTSTA_CC) { |
| ctrl->cmd_busy = 0; |
| smp_mb(); |
| wake_up(&ctrl->queue); |
| } |
| |
| if (!(intr_loc & ~PCI_EXP_SLTSTA_CC)) |
| return IRQ_HANDLED; |
| |
| /* Check MRL Sensor Changed */ |
| if (intr_loc & PCI_EXP_SLTSTA_MRLSC) |
| pciehp_handle_switch_change(slot); |
| |
| /* Check Attention Button Pressed */ |
| if (intr_loc & PCI_EXP_SLTSTA_ABP) |
| pciehp_handle_attention_button(slot); |
| |
| /* Check Presence Detect Changed */ |
| if (intr_loc & PCI_EXP_SLTSTA_PDC) |
| pciehp_handle_presence_change(slot); |
| |
| /* Check Power Fault Detected */ |
| if ((intr_loc & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) { |
| ctrl->power_fault_detected = 1; |
| pciehp_handle_power_fault(slot); |
| } |
| |
| if (intr_loc & PCI_EXP_SLTSTA_DLLSC) |
| pciehp_handle_linkstate_change(slot); |
| |
| return IRQ_HANDLED; |
| } |
| |
| void pcie_enable_notification(struct controller *ctrl) |
| { |
| u16 cmd, mask; |
| |
| /* |
| * TBD: Power fault detected software notification support. |
| * |
| * Power fault detected software notification is not enabled |
| * now, because it caused power fault detected interrupt storm |
| * on some machines. On those machines, power fault detected |
| * bit in the slot status register was set again immediately |
| * when it is cleared in the interrupt service routine, and |
| * next power fault detected interrupt was notified again. |
| */ |
| |
| /* |
| * Always enable link events: thus link-up and link-down shall |
| * always be treated as hotplug and unplug respectively. Enable |
| * presence detect only if Attention Button is not present. |
| */ |
| cmd = PCI_EXP_SLTCTL_DLLSCE; |
| if (ATTN_BUTTN(ctrl)) |
| cmd |= PCI_EXP_SLTCTL_ABPE; |
| else |
| cmd |= PCI_EXP_SLTCTL_PDCE; |
| if (MRL_SENS(ctrl)) |
| cmd |= PCI_EXP_SLTCTL_MRLSCE; |
| if (!pciehp_poll_mode) |
| cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE; |
| |
| mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE | |
| PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE | |
| PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| |
| pcie_write_cmd(ctrl, cmd, mask); |
| } |
| |
| static void pcie_disable_notification(struct controller *ctrl) |
| { |
| u16 mask; |
| |
| mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE | |
| PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE | |
| PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| pcie_write_cmd(ctrl, 0, mask); |
| } |
| |
| /* |
| * pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary |
| * bus reset of the bridge, but at the same time we want to ensure that it is |
| * not seen as a hot-unplug, followed by the hot-plug of the device. Thus, |
| * disable link state notification and presence detection change notification |
| * momentarily, if we see that they could interfere. Also, clear any spurious |
| * events after. |
| */ |
| int pciehp_reset_slot(struct slot *slot, int probe) |
| { |
| struct controller *ctrl = slot->ctrl; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 stat_mask = 0, ctrl_mask = 0; |
| |
| if (probe) |
| return 0; |
| |
| if (!ATTN_BUTTN(ctrl)) { |
| ctrl_mask |= PCI_EXP_SLTCTL_PDCE; |
| stat_mask |= PCI_EXP_SLTSTA_PDC; |
| } |
| ctrl_mask |= PCI_EXP_SLTCTL_DLLSCE; |
| stat_mask |= PCI_EXP_SLTSTA_DLLSC; |
| |
| pcie_write_cmd(ctrl, 0, ctrl_mask); |
| if (pciehp_poll_mode) |
| del_timer_sync(&ctrl->poll_timer); |
| |
| pci_reset_bridge_secondary_bus(ctrl->pcie->port); |
| |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask); |
| pcie_write_cmd(ctrl, ctrl_mask, ctrl_mask); |
| if (pciehp_poll_mode) |
| int_poll_timeout(ctrl->poll_timer.data); |
| |
| return 0; |
| } |
| |
| int pcie_init_notification(struct controller *ctrl) |
| { |
| if (pciehp_request_irq(ctrl)) |
| return -1; |
| pcie_enable_notification(ctrl); |
| ctrl->notification_enabled = 1; |
| return 0; |
| } |
| |
| static void pcie_shutdown_notification(struct controller *ctrl) |
| { |
| if (ctrl->notification_enabled) { |
| pcie_disable_notification(ctrl); |
| pciehp_free_irq(ctrl); |
| ctrl->notification_enabled = 0; |
| } |
| } |
| |
| static int pcie_init_slot(struct controller *ctrl) |
| { |
| struct slot *slot; |
| |
| slot = kzalloc(sizeof(*slot), GFP_KERNEL); |
| if (!slot) |
| return -ENOMEM; |
| |
| slot->wq = alloc_workqueue("pciehp-%u", 0, 0, PSN(ctrl)); |
| if (!slot->wq) |
| goto abort; |
| |
| slot->ctrl = ctrl; |
| mutex_init(&slot->lock); |
| mutex_init(&slot->hotplug_lock); |
| INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); |
| ctrl->slot = slot; |
| return 0; |
| abort: |
| kfree(slot); |
| return -ENOMEM; |
| } |
| |
| static void pcie_cleanup_slot(struct controller *ctrl) |
| { |
| struct slot *slot = ctrl->slot; |
| cancel_delayed_work(&slot->work); |
| destroy_workqueue(slot->wq); |
| kfree(slot); |
| } |
| |
| static inline void dbg_ctrl(struct controller *ctrl) |
| { |
| int i; |
| u16 reg16; |
| struct pci_dev *pdev = ctrl->pcie->port; |
| |
| if (!pciehp_debug) |
| return; |
| |
| ctrl_info(ctrl, "Hotplug Controller:\n"); |
| ctrl_info(ctrl, " Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n", |
| pci_name(pdev), pdev->irq); |
| ctrl_info(ctrl, " Vendor ID : 0x%04x\n", pdev->vendor); |
| ctrl_info(ctrl, " Device ID : 0x%04x\n", pdev->device); |
| ctrl_info(ctrl, " Subsystem ID : 0x%04x\n", |
| pdev->subsystem_device); |
| ctrl_info(ctrl, " Subsystem Vendor ID : 0x%04x\n", |
| pdev->subsystem_vendor); |
| ctrl_info(ctrl, " PCIe Cap offset : 0x%02x\n", |
| pci_pcie_cap(pdev)); |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| if (!pci_resource_len(pdev, i)) |
| continue; |
| ctrl_info(ctrl, " PCI resource [%d] : %pR\n", |
| i, &pdev->resource[i]); |
| } |
| ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap); |
| ctrl_info(ctrl, " Physical Slot Number : %d\n", PSN(ctrl)); |
| ctrl_info(ctrl, " Attention Button : %3s\n", |
| ATTN_BUTTN(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " Power Controller : %3s\n", |
| POWER_CTRL(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " MRL Sensor : %3s\n", |
| MRL_SENS(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " Attention Indicator : %3s\n", |
| ATTN_LED(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " Power Indicator : %3s\n", |
| PWR_LED(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " Hot-Plug Surprise : %3s\n", |
| HP_SUPR_RM(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " EMI Present : %3s\n", |
| EMI(ctrl) ? "yes" : "no"); |
| ctrl_info(ctrl, " Command Completed : %3s\n", |
| NO_CMD_CMPL(ctrl) ? "no" : "yes"); |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, ®16); |
| ctrl_info(ctrl, "Slot Status : 0x%04x\n", reg16); |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, ®16); |
| ctrl_info(ctrl, "Slot Control : 0x%04x\n", reg16); |
| } |
| |
| #define FLAG(x, y) (((x) & (y)) ? '+' : '-') |
| |
| struct controller *pcie_init(struct pcie_device *dev) |
| { |
| struct controller *ctrl; |
| u32 slot_cap, link_cap; |
| struct pci_dev *pdev = dev->port; |
| |
| ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); |
| if (!ctrl) { |
| dev_err(&dev->device, "%s: Out of memory\n", __func__); |
| goto abort; |
| } |
| ctrl->pcie = dev; |
| pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap); |
| ctrl->slot_cap = slot_cap; |
| mutex_init(&ctrl->ctrl_lock); |
| init_waitqueue_head(&ctrl->queue); |
| dbg_ctrl(ctrl); |
| /* |
| * Controller doesn't notify of command completion if the "No |
| * Command Completed Support" bit is set in Slot Capability |
| * register or the controller supports none of power |
| * controller, attention led, power led and EMI. |
| */ |
| if (NO_CMD_CMPL(ctrl) || |
| !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) |
| ctrl->no_cmd_complete = 1; |
| |
| /* Check if Data Link Layer Link Active Reporting is implemented */ |
| pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap); |
| if (link_cap & PCI_EXP_LNKCAP_DLLLARC) { |
| ctrl_dbg(ctrl, "Link Active Reporting supported\n"); |
| ctrl->link_active_reporting = 1; |
| } |
| |
| /* Clear all remaining event bits in Slot Status register */ |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | |
| PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | |
| PCI_EXP_SLTSTA_CC); |
| |
| /* Disable software notification */ |
| pcie_disable_notification(ctrl); |
| |
| ctrl_info(ctrl, "Slot #%d AttnBtn%c AttnInd%c PwrInd%c PwrCtrl%c MRL%c Interlock%c NoCompl%c LLActRep%c\n", |
| (slot_cap & PCI_EXP_SLTCAP_PSN) >> 19, |
| FLAG(slot_cap, PCI_EXP_SLTCAP_ABP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_AIP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_PIP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_PCP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_MRLSP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_EIP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS), |
| FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC)); |
| |
| if (pcie_init_slot(ctrl)) |
| goto abort_ctrl; |
| |
| return ctrl; |
| |
| abort_ctrl: |
| kfree(ctrl); |
| abort: |
| return NULL; |
| } |
| |
| void pciehp_release_ctrl(struct controller *ctrl) |
| { |
| pcie_shutdown_notification(ctrl); |
| pcie_cleanup_slot(ctrl); |
| kfree(ctrl); |
| } |