Merge branches 'pm-sleep' and 'pm-cpufreq'
* pm-sleep:
PM / sleep: fix freeze_ops NULL pointer dereferences
PM / sleep: Fix request_firmware() error at resume
* pm-cpufreq:
cpufreq: make table sentinel macros unsigned to match use
cpufreq: move policy kobj to policy->cpu at resume
cpufreq: cpu0: OPPs can be populated at runtime
cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
cpufreq: imx6q: Select PM_OPP
cpufreq: sa1110: set memory type for h3600
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index fd786ea..e182be5 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -60,12 +60,6 @@
configuring GPIOs it can get its ACPI handle and extract this information
from ACPI tables.
-Currently the kernel is not able to automatically determine from which ACPI
-device it should make the corresponding platform device so we need to add
-the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/acpi_platform.c. This limitation is only for the platform
-devices, SPI and I2C devices are created automatically as described below.
-
DMA support
~~~~~~~~~~~
DMA controllers enumerated via ACPI should be registered in the system to
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index f055515..366690c 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -8,10 +8,12 @@
under node /cpus/cpu@0.
Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
- for details
+- None
Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+ details. OPPs *must* be supplied either via DT, i.e. this property, or
+ populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
in unit of nanoseconds.
- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1b9aa8..e332e71 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3526,7 +3526,7 @@
the allocated input device; If set to 0, video driver
will only send out the event without touching backlight
brightness level.
- default: 0
+ default: 1
virtio_mmio.device=
[VMMIO] Memory mapped virtio (platform) device.
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 071c1df..350d52a 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -68,7 +68,7 @@
MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
-static bool brightness_switch_enabled;
+static bool brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
/*
@@ -581,6 +581,14 @@
},
{
.callback = video_set_use_native_backlight,
+ .ident = "HP ProBook 4540s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP ProBook 4540s"),
+ },
+ },
+ {
+ .callback = video_set_use_native_backlight,
.ident = "HP ProBook 2013 models",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ebac671..7364a53 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -104,6 +104,7 @@
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
depends on REGULATOR_ANATOP
+ select PM_OPP
help
This adds cpufreq driver support for Freescale i.MX6 series SoCs.
@@ -118,7 +119,7 @@
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool MACH_KIRKWOOD
+ def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index ee1ae30..86beda9 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -152,11 +152,8 @@
goto out_put_reg;
}
- ret = of_init_opp_table(cpu_dev);
- if (ret) {
- pr_err("failed to init OPP table: %d\n", ret);
- goto out_put_clk;
- }
+ /* OPPs might be populated at runtime, don't check for error here */
+ of_init_opp_table(cpu_dev);
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 62259d2..6f02485 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1153,10 +1153,12 @@
* the creation of a brand new one. So we need to perform this update
* by invoking update_policy_cpu().
*/
- if (recover_policy && cpu != policy->cpu)
+ if (recover_policy && cpu != policy->cpu) {
update_policy_cpu(policy, cpu);
- else
+ WARN_ON(kobject_move(&policy->kobj, &dev->kobj));
+ } else {
policy->cpu = cpu;
+ }
cpumask_copy(policy->cpus, cpumask_of(cpu));
diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index 5463767..b5befc2 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -349,7 +349,7 @@
name = "K4S641632D";
if (machine_is_h3100())
name = "KM416S4030CT";
- if (machine_is_jornada720())
+ if (machine_is_jornada720() || machine_is_h3600())
name = "K4S281632B-1H";
if (machine_is_nanoengine())
name = "MT48LC8M16A2TG-75";
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index ec4112d..8f8ae95 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -482,8 +482,8 @@
*********************************************************************/
/* Special Values of .frequency field */
-#define CPUFREQ_ENTRY_INVALID ~0
-#define CPUFREQ_TABLE_END ~1
+#define CPUFREQ_ENTRY_INVALID ~0u
+#define CPUFREQ_TABLE_END ~1u
/* Special Values of .flags field */
#define CPUFREQ_BOOST_FREQ (1 << 0)
