| /* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */ |
| /* |
| Written 1999-2000 by Donald Becker. |
| |
| This software may be used and distributed according to the terms of |
| the GNU General Public License (GPL), incorporated herein by reference. |
| Drivers based on or derived from this code fall under the GPL and must |
| retain the authorship, copyright and license notice. This file is not |
| a complete program and may only be used when the entire operating |
| system is licensed under the GPL. |
| |
| The author may be reached as becker@scyld.com, or C/O |
| Scyld Computing Corporation |
| 410 Severn Ave., Suite 210 |
| Annapolis MD 21403 |
| |
| Support and updates available at |
| http://www.scyld.com/network/sundance.html |
| [link no longer provides useful info -jgarzik] |
| Archives of the mailing list are still available at |
| http://www.beowulf.org/pipermail/netdrivers/ |
| |
| */ |
| |
| #define DRV_NAME "sundance" |
| #define DRV_VERSION "1.2" |
| #define DRV_RELDATE "11-Sep-2006" |
| |
| |
| /* The user-configurable values. |
| These may be modified when a driver module is loaded.*/ |
| static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ |
| /* Maximum number of multicast addresses to filter (vs. rx-all-multicast). |
| Typical is a 64 element hash table based on the Ethernet CRC. */ |
| static const int multicast_filter_limit = 32; |
| |
| /* Set the copy breakpoint for the copy-only-tiny-frames scheme. |
| Setting to > 1518 effectively disables this feature. |
| This chip can receive into offset buffers, so the Alpha does not |
| need a copy-align. */ |
| static int rx_copybreak; |
| static int flowctrl=1; |
| |
| /* media[] specifies the media type the NIC operates at. |
| autosense Autosensing active media. |
| 10mbps_hd 10Mbps half duplex. |
| 10mbps_fd 10Mbps full duplex. |
| 100mbps_hd 100Mbps half duplex. |
| 100mbps_fd 100Mbps full duplex. |
| 0 Autosensing active media. |
| 1 10Mbps half duplex. |
| 2 10Mbps full duplex. |
| 3 100Mbps half duplex. |
| 4 100Mbps full duplex. |
| */ |
| #define MAX_UNITS 8 |
| static char *media[MAX_UNITS]; |
| |
| |
| /* Operational parameters that are set at compile time. */ |
| |
| /* Keep the ring sizes a power of two for compile efficiency. |
| The compiler will convert <unsigned>'%'<2^N> into a bit mask. |
| Making the Tx ring too large decreases the effectiveness of channel |
| bonding and packet priority, and more than 128 requires modifying the |
| Tx error recovery. |
| Large receive rings merely waste memory. */ |
| #define TX_RING_SIZE 32 |
| #define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used. */ |
| #define RX_RING_SIZE 64 |
| #define RX_BUDGET 32 |
| #define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc) |
| #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc) |
| |
| /* Operational parameters that usually are not changed. */ |
| /* Time in jiffies before concluding the transmitter is hung. */ |
| #define TX_TIMEOUT (4*HZ) |
| #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ |
| |
| /* Include files, designed to support most kernel versions 2.0.0 and later. */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <asm/uaccess.h> |
| #include <asm/processor.h> /* Processor type for cache alignment. */ |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/crc32.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| |
| /* These identify the driver base version and may not be removed. */ |
| static const char version[] = |
| KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE |
| " Written by Donald Becker\n"; |
| |
| MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); |
| MODULE_DESCRIPTION("Sundance Alta Ethernet driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(debug, int, 0); |
| module_param(rx_copybreak, int, 0); |
| module_param_array(media, charp, NULL, 0); |
| module_param(flowctrl, int, 0); |
| MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)"); |
| MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames"); |
| MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]"); |
| |
| /* |
| Theory of Operation |
| |
| I. Board Compatibility |
| |
| This driver is designed for the Sundance Technologies "Alta" ST201 chip. |
| |
| II. Board-specific settings |
| |
| III. Driver operation |
| |
| IIIa. Ring buffers |
| |
| This driver uses two statically allocated fixed-size descriptor lists |
| formed into rings by a branch from the final descriptor to the beginning of |
| the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. |
| Some chips explicitly use only 2^N sized rings, while others use a |
| 'next descriptor' pointer that the driver forms into rings. |
| |
| IIIb/c. Transmit/Receive Structure |
| |
| This driver uses a zero-copy receive and transmit scheme. |
| The driver allocates full frame size skbuffs for the Rx ring buffers at |
| open() time and passes the skb->data field to the chip as receive data |
| buffers. When an incoming frame is less than RX_COPYBREAK bytes long, |
| a fresh skbuff is allocated and the frame is copied to the new skbuff. |
| When the incoming frame is larger, the skbuff is passed directly up the |
| protocol stack. Buffers consumed this way are replaced by newly allocated |
| skbuffs in a later phase of receives. |
| |
| The RX_COPYBREAK value is chosen to trade-off the memory wasted by |
| using a full-sized skbuff for small frames vs. the copying costs of larger |
| frames. New boards are typically used in generously configured machines |
| and the underfilled buffers have negligible impact compared to the benefit of |
| a single allocation size, so the default value of zero results in never |
| copying packets. When copying is done, the cost is usually mitigated by using |
| a combined copy/checksum routine. Copying also preloads the cache, which is |
| most useful with small frames. |
| |
| A subtle aspect of the operation is that the IP header at offset 14 in an |
| ethernet frame isn't longword aligned for further processing. |
| Unaligned buffers are permitted by the Sundance hardware, so |
| frames are received into the skbuff at an offset of "+2", 16-byte aligning |
| the IP header. |
| |
| IIId. Synchronization |
| |
| The driver runs as two independent, single-threaded flows of control. One |
| is the send-packet routine, which enforces single-threaded use by the |
| dev->tbusy flag. The other thread is the interrupt handler, which is single |
| threaded by the hardware and interrupt handling software. |
| |
| The send packet thread has partial control over the Tx ring and 'dev->tbusy' |
| flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next |
| queue slot is empty, it clears the tbusy flag when finished otherwise it sets |
| the 'lp->tx_full' flag. |
| |
| The interrupt handler has exclusive control over the Rx ring and records stats |
| from the Tx ring. After reaping the stats, it marks the Tx queue entry as |
| empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it |
| clears both the tx_full and tbusy flags. |
| |
| IV. Notes |
| |
| IVb. References |
| |
| The Sundance ST201 datasheet, preliminary version. |
| The Kendin KS8723 datasheet, preliminary version. |
| The ICplus IP100 datasheet, preliminary version. |
| http://www.scyld.com/expert/100mbps.html |
| http://www.scyld.com/expert/NWay.html |
| |
| IVc. Errata |
| |
| */ |
| |
| /* Work-around for Kendin chip bugs. */ |
| #ifndef CONFIG_SUNDANCE_MMIO |
| #define USE_IO_OPS 1 |
| #endif |
| |
| static DEFINE_PCI_DEVICE_TABLE(sundance_pci_tbl) = { |
| { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 }, |
| { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 }, |
| { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 }, |
| { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 }, |
| { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, |
| { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, |
| { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(pci, sundance_pci_tbl); |
| |
| enum { |
| netdev_io_size = 128 |
| }; |
| |
| struct pci_id_info { |
| const char *name; |
| }; |
| static const struct pci_id_info pci_id_tbl[] = { |
| {"D-Link DFE-550TX FAST Ethernet Adapter"}, |
| {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"}, |
| {"D-Link DFE-580TX 4 port Server Adapter"}, |
| {"D-Link DFE-530TXS FAST Ethernet Adapter"}, |
| {"D-Link DL10050-based FAST Ethernet Adapter"}, |
| {"Sundance Technology Alta"}, |
| {"IC Plus Corporation IP100A FAST Ethernet Adapter"}, |
| { } /* terminate list. */ |
| }; |
| |
| /* This driver was written to use PCI memory space, however x86-oriented |
| hardware often uses I/O space accesses. */ |
| |
| /* Offsets to the device registers. |
| Unlike software-only systems, device drivers interact with complex hardware. |
| It's not useful to define symbolic names for every register bit in the |
| device. The name can only partially document the semantics and make |
| the driver longer and more difficult to read. |
| In general, only the important configuration values or bits changed |
| multiple times should be defined symbolically. |
| */ |
| enum alta_offsets { |
| DMACtrl = 0x00, |
| TxListPtr = 0x04, |
| TxDMABurstThresh = 0x08, |
| TxDMAUrgentThresh = 0x09, |
| TxDMAPollPeriod = 0x0a, |
| RxDMAStatus = 0x0c, |
| RxListPtr = 0x10, |
| DebugCtrl0 = 0x1a, |
| DebugCtrl1 = 0x1c, |
| RxDMABurstThresh = 0x14, |
| RxDMAUrgentThresh = 0x15, |
| RxDMAPollPeriod = 0x16, |
| LEDCtrl = 0x1a, |
| ASICCtrl = 0x30, |
| EEData = 0x34, |
| EECtrl = 0x36, |
| FlashAddr = 0x40, |
| FlashData = 0x44, |
| WakeEvent = 0x45, |
| TxStatus = 0x46, |
| TxFrameId = 0x47, |
| DownCounter = 0x18, |
| IntrClear = 0x4a, |
| IntrEnable = 0x4c, |
| IntrStatus = 0x4e, |
| MACCtrl0 = 0x50, |
| MACCtrl1 = 0x52, |
| StationAddr = 0x54, |
| MaxFrameSize = 0x5A, |
| RxMode = 0x5c, |
| MIICtrl = 0x5e, |
| MulticastFilter0 = 0x60, |
| MulticastFilter1 = 0x64, |
| RxOctetsLow = 0x68, |
| RxOctetsHigh = 0x6a, |
| TxOctetsLow = 0x6c, |
| TxOctetsHigh = 0x6e, |
| TxFramesOK = 0x70, |
| RxFramesOK = 0x72, |
| StatsCarrierError = 0x74, |
| StatsLateColl = 0x75, |
| StatsMultiColl = 0x76, |
| StatsOneColl = 0x77, |
| StatsTxDefer = 0x78, |
| RxMissed = 0x79, |
| StatsTxXSDefer = 0x7a, |
| StatsTxAbort = 0x7b, |
| StatsBcastTx = 0x7c, |
| StatsBcastRx = 0x7d, |
| StatsMcastTx = 0x7e, |
| StatsMcastRx = 0x7f, |
| /* Aliased and bogus values! */ |
| RxStatus = 0x0c, |
| }; |
| |
| #define ASIC_HI_WORD(x) ((x) + 2) |
| |
| enum ASICCtrl_HiWord_bit { |
| GlobalReset = 0x0001, |
| RxReset = 0x0002, |
| TxReset = 0x0004, |
| DMAReset = 0x0008, |
| FIFOReset = 0x0010, |
| NetworkReset = 0x0020, |
| HostReset = 0x0040, |
| ResetBusy = 0x0400, |
| }; |
| |
| /* Bits in the interrupt status/mask registers. */ |
| enum intr_status_bits { |
| IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008, |
| IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020, |
| IntrDrvRqst=0x0040, |
| StatsMax=0x0080, LinkChange=0x0100, |
| IntrTxDMADone=0x0200, IntrRxDMADone=0x0400, |
| }; |
| |
| /* Bits in the RxMode register. */ |
| enum rx_mode_bits { |
| AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08, |
| AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01, |
| }; |
| /* Bits in MACCtrl. */ |
| enum mac_ctrl0_bits { |
| EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40, |
| EnbFlowCtrl=0x100, EnbPassRxCRC=0x200, |
| }; |
| enum mac_ctrl1_bits { |
| StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080, |
| TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400, |
| RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000, |
| }; |
| |
| /* Bits in WakeEvent register. */ |
| enum wake_event_bits { |
| WakePktEnable = 0x01, |
| MagicPktEnable = 0x02, |
| LinkEventEnable = 0x04, |
| WolEnable = 0x80, |
| }; |
| |
| /* The Rx and Tx buffer descriptors. */ |
| /* Note that using only 32 bit fields simplifies conversion to big-endian |
| architectures. */ |
| struct netdev_desc { |
| __le32 next_desc; |
| __le32 status; |
| struct desc_frag { __le32 addr, length; } frag[1]; |
| }; |
| |
| /* Bits in netdev_desc.status */ |
| enum desc_status_bits { |
| DescOwn=0x8000, |
| DescEndPacket=0x4000, |
| DescEndRing=0x2000, |
| LastFrag=0x80000000, |
| DescIntrOnTx=0x8000, |
| DescIntrOnDMADone=0x80000000, |
| DisableAlign = 0x00000001, |
| }; |
| |
| #define PRIV_ALIGN 15 /* Required alignment mask */ |
| /* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment |
| within the structure. */ |
| #define MII_CNT 4 |
| struct netdev_private { |
| /* Descriptor rings first for alignment. */ |
| struct netdev_desc *rx_ring; |
| struct netdev_desc *tx_ring; |
| struct sk_buff* rx_skbuff[RX_RING_SIZE]; |
| struct sk_buff* tx_skbuff[TX_RING_SIZE]; |
| dma_addr_t tx_ring_dma; |
| dma_addr_t rx_ring_dma; |
| struct timer_list timer; /* Media monitoring timer. */ |
| /* ethtool extra stats */ |
| struct { |
| u64 tx_multiple_collisions; |
| u64 tx_single_collisions; |
| u64 tx_late_collisions; |
| u64 tx_deferred; |
| u64 tx_deferred_excessive; |
| u64 tx_aborted; |
| u64 tx_bcasts; |
| u64 rx_bcasts; |
| u64 tx_mcasts; |
| u64 rx_mcasts; |
| } xstats; |
| /* Frequently used values: keep some adjacent for cache effect. */ |
| spinlock_t lock; |
| int msg_enable; |
| int chip_id; |
| unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ |
| unsigned int rx_buf_sz; /* Based on MTU+slack. */ |
| struct netdev_desc *last_tx; /* Last Tx descriptor used. */ |
| unsigned int cur_tx, dirty_tx; |
| /* These values are keep track of the transceiver/media in use. */ |
| unsigned int flowctrl:1; |
| unsigned int default_port:4; /* Last dev->if_port value. */ |
| unsigned int an_enable:1; |
| unsigned int speed; |
| unsigned int wol_enabled:1; /* Wake on LAN enabled */ |
| struct tasklet_struct rx_tasklet; |
| struct tasklet_struct tx_tasklet; |
| int budget; |
| int cur_task; |
| /* Multicast and receive mode. */ |
| spinlock_t mcastlock; /* SMP lock multicast updates. */ |
| u16 mcast_filter[4]; |
| /* MII transceiver section. */ |
| struct mii_if_info mii_if; |
| int mii_preamble_required; |
| unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */ |
| struct pci_dev *pci_dev; |
| void __iomem *base; |
| spinlock_t statlock; |
| }; |
| |
| /* The station address location in the EEPROM. */ |
| #define EEPROM_SA_OFFSET 0x10 |
| #define DEFAULT_INTR (IntrRxDMADone | IntrPCIErr | \ |
| IntrDrvRqst | IntrTxDone | StatsMax | \ |
| LinkChange) |
| |
| static int change_mtu(struct net_device *dev, int new_mtu); |
| static int eeprom_read(void __iomem *ioaddr, int location); |
| static int mdio_read(struct net_device *dev, int phy_id, int location); |
| static void mdio_write(struct net_device *dev, int phy_id, int location, int value); |
| static int mdio_wait_link(struct net_device *dev, int wait); |
| static int netdev_open(struct net_device *dev); |
| static void check_duplex(struct net_device *dev); |
| static void netdev_timer(unsigned long data); |
| static void tx_timeout(struct net_device *dev); |
| static void init_ring(struct net_device *dev); |
| static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); |
| static int reset_tx (struct net_device *dev); |
| static irqreturn_t intr_handler(int irq, void *dev_instance); |
| static void rx_poll(unsigned long data); |
| static void tx_poll(unsigned long data); |
| static void refill_rx (struct net_device *dev); |
| static void netdev_error(struct net_device *dev, int intr_status); |
| static void netdev_error(struct net_device *dev, int intr_status); |
| static void set_rx_mode(struct net_device *dev); |
| static int __set_mac_addr(struct net_device *dev); |
| static int sundance_set_mac_addr(struct net_device *dev, void *data); |
| static struct net_device_stats *get_stats(struct net_device *dev); |
| static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| static int netdev_close(struct net_device *dev); |
| static const struct ethtool_ops ethtool_ops; |
| |
| static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base + ASICCtrl; |
| int countdown; |
| |
| /* ST201 documentation states ASICCtrl is a 32bit register */ |
| iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); |
| /* ST201 documentation states reset can take up to 1 ms */ |
| countdown = 10 + 1; |
| while (ioread32 (ioaddr) & (ResetBusy << 16)) { |
| if (--countdown == 0) { |
| printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); |
| break; |
| } |
| udelay(100); |
| } |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void sundance_poll_controller(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| |
| disable_irq(np->pci_dev->irq); |
| intr_handler(np->pci_dev->irq, dev); |
| enable_irq(np->pci_dev->irq); |
| } |
| #endif |
| |
| static const struct net_device_ops netdev_ops = { |
| .ndo_open = netdev_open, |
| .ndo_stop = netdev_close, |
| .ndo_start_xmit = start_tx, |
| .ndo_get_stats = get_stats, |
| .ndo_set_rx_mode = set_rx_mode, |
| .ndo_do_ioctl = netdev_ioctl, |
| .ndo_tx_timeout = tx_timeout, |
| .ndo_change_mtu = change_mtu, |
| .ndo_set_mac_address = sundance_set_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = sundance_poll_controller, |
| #endif |
| }; |
| |
| static int sundance_probe1(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *dev; |
| struct netdev_private *np; |
| static int card_idx; |
| int chip_idx = ent->driver_data; |
| int irq; |
| int i; |
| void __iomem *ioaddr; |
| u16 mii_ctl; |
| void *ring_space; |
| dma_addr_t ring_dma; |
| #ifdef USE_IO_OPS |
| int bar = 0; |
| #else |
| int bar = 1; |
| #endif |
| int phy, phy_end, phy_idx = 0; |
| |
| /* when built into the kernel, we only print version if device is found */ |
| #ifndef MODULE |
| static int printed_version; |
| if (!printed_version++) |
| printk(version); |
| #endif |
| |
| if (pci_enable_device(pdev)) |
| return -EIO; |
| pci_set_master(pdev); |
| |
| irq = pdev->irq; |
| |
| dev = alloc_etherdev(sizeof(*np)); |
| if (!dev) |
| return -ENOMEM; |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| if (pci_request_regions(pdev, DRV_NAME)) |
| goto err_out_netdev; |
| |
| ioaddr = pci_iomap(pdev, bar, netdev_io_size); |
| if (!ioaddr) |
| goto err_out_res; |
| |
| for (i = 0; i < 3; i++) |
| ((__le16 *)dev->dev_addr)[i] = |
| cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); |
| |
| np = netdev_priv(dev); |
| np->base = ioaddr; |
| np->pci_dev = pdev; |
| np->chip_id = chip_idx; |
| np->msg_enable = (1 << debug) - 1; |
| spin_lock_init(&np->lock); |
| spin_lock_init(&np->statlock); |
| tasklet_init(&np->rx_tasklet, rx_poll, (unsigned long)dev); |
| tasklet_init(&np->tx_tasklet, tx_poll, (unsigned long)dev); |
| |
| ring_space = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE, |
| &ring_dma, GFP_KERNEL); |
| if (!ring_space) |
| goto err_out_cleardev; |
| np->tx_ring = (struct netdev_desc *)ring_space; |
| np->tx_ring_dma = ring_dma; |
| |
| ring_space = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE, |
| &ring_dma, GFP_KERNEL); |
| if (!ring_space) |
| goto err_out_unmap_tx; |
| np->rx_ring = (struct netdev_desc *)ring_space; |
| np->rx_ring_dma = ring_dma; |
| |
| np->mii_if.dev = dev; |
| np->mii_if.mdio_read = mdio_read; |
| np->mii_if.mdio_write = mdio_write; |
| np->mii_if.phy_id_mask = 0x1f; |
| np->mii_if.reg_num_mask = 0x1f; |
| |
| /* The chip-specific entries in the device structure. */ |
| dev->netdev_ops = &netdev_ops; |
| SET_ETHTOOL_OPS(dev, ðtool_ops); |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| pci_set_drvdata(pdev, dev); |
| |
| i = register_netdev(dev); |
| if (i) |
| goto err_out_unmap_rx; |
| |
| printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", |
| dev->name, pci_id_tbl[chip_idx].name, ioaddr, |
| dev->dev_addr, irq); |
| |
| np->phys[0] = 1; /* Default setting */ |
| np->mii_preamble_required++; |
| |
| /* |
| * It seems some phys doesn't deal well with address 0 being accessed |
| * first |
| */ |
| if (sundance_pci_tbl[np->chip_id].device == 0x0200) { |
| phy = 0; |
| phy_end = 31; |
| } else { |
| phy = 1; |
| phy_end = 32; /* wraps to zero, due to 'phy & 0x1f' */ |
| } |
| for (; phy <= phy_end && phy_idx < MII_CNT; phy++) { |
| int phyx = phy & 0x1f; |
| int mii_status = mdio_read(dev, phyx, MII_BMSR); |
| if (mii_status != 0xffff && mii_status != 0x0000) { |
| np->phys[phy_idx++] = phyx; |
| np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE); |
| if ((mii_status & 0x0040) == 0) |
| np->mii_preamble_required++; |
| printk(KERN_INFO "%s: MII PHY found at address %d, status " |
| "0x%4.4x advertising %4.4x.\n", |
| dev->name, phyx, mii_status, np->mii_if.advertising); |
| } |
| } |
| np->mii_preamble_required--; |
| |
| if (phy_idx == 0) { |
| printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", |
| dev->name, ioread32(ioaddr + ASICCtrl)); |
| goto err_out_unregister; |
| } |
| |
| np->mii_if.phy_id = np->phys[0]; |
| |
| /* Parse override configuration */ |
| np->an_enable = 1; |
| if (card_idx < MAX_UNITS) { |
| if (media[card_idx] != NULL) { |
| np->an_enable = 0; |
| if (strcmp (media[card_idx], "100mbps_fd") == 0 || |
| strcmp (media[card_idx], "4") == 0) { |
| np->speed = 100; |
| np->mii_if.full_duplex = 1; |
| } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || |
| strcmp (media[card_idx], "3") == 0) { |
| np->speed = 100; |
| np->mii_if.full_duplex = 0; |
| } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || |
| strcmp (media[card_idx], "2") == 0) { |
| np->speed = 10; |
| np->mii_if.full_duplex = 1; |
| } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || |
| strcmp (media[card_idx], "1") == 0) { |
| np->speed = 10; |
| np->mii_if.full_duplex = 0; |
| } else { |
| np->an_enable = 1; |
| } |
| } |
| if (flowctrl == 1) |
| np->flowctrl = 1; |
| } |
| |
| /* Fibre PHY? */ |
| if (ioread32 (ioaddr + ASICCtrl) & 0x80) { |
| /* Default 100Mbps Full */ |
| if (np->an_enable) { |
| np->speed = 100; |
| np->mii_if.full_duplex = 1; |
| np->an_enable = 0; |
| } |
| } |
| /* Reset PHY */ |
| mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET); |
| mdelay (300); |
| /* If flow control enabled, we need to advertise it.*/ |
| if (np->flowctrl) |
| mdio_write (dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising | 0x0400); |
| mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART); |
| /* Force media type */ |
| if (!np->an_enable) { |
| mii_ctl = 0; |
| mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0; |
| mii_ctl |= (np->mii_if.full_duplex) ? BMCR_FULLDPLX : 0; |
| mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl); |
| printk (KERN_INFO "Override speed=%d, %s duplex\n", |
| np->speed, np->mii_if.full_duplex ? "Full" : "Half"); |
| |
| } |
| |
| /* Perhaps move the reset here? */ |
| /* Reset the chip to erase previous misconfiguration. */ |
| if (netif_msg_hw(np)) |
| printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); |
| sundance_reset(dev, 0x00ff << 16); |
| if (netif_msg_hw(np)) |
| printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); |
| |
| card_idx++; |
| return 0; |
| |
| err_out_unregister: |
| unregister_netdev(dev); |
| err_out_unmap_rx: |
| dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, |
| np->rx_ring, np->rx_ring_dma); |
| err_out_unmap_tx: |
| dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, |
| np->tx_ring, np->tx_ring_dma); |
| err_out_cleardev: |
| pci_iounmap(pdev, ioaddr); |
| err_out_res: |
| pci_release_regions(pdev); |
| err_out_netdev: |
| free_netdev (dev); |
| return -ENODEV; |
| } |
| |
| static int change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */ |
| return -EINVAL; |
| if (netif_running(dev)) |
| return -EBUSY; |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| #define eeprom_delay(ee_addr) ioread32(ee_addr) |
| /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */ |
| static int eeprom_read(void __iomem *ioaddr, int location) |
| { |
| int boguscnt = 10000; /* Typical 1900 ticks. */ |
| iowrite16(0x0200 | (location & 0xff), ioaddr + EECtrl); |
| do { |
| eeprom_delay(ioaddr + EECtrl); |
| if (! (ioread16(ioaddr + EECtrl) & 0x8000)) { |
| return ioread16(ioaddr + EEData); |
| } |
| } while (--boguscnt > 0); |
| return 0; |
| } |
| |
| /* MII transceiver control section. |
| Read and write the MII registers using software-generated serial |
| MDIO protocol. See the MII specifications or DP83840A data sheet |
| for details. |
| |
| The maximum data clock rate is 2.5 Mhz. The minimum timing is usually |
| met by back-to-back 33Mhz PCI cycles. */ |
| #define mdio_delay() ioread8(mdio_addr) |
| |
| enum mii_reg_bits { |
| MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004, |
| }; |
| #define MDIO_EnbIn (0) |
| #define MDIO_WRITE0 (MDIO_EnbOutput) |
| #define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput) |
| |
| /* Generate the preamble required for initial synchronization and |
| a few older transceivers. */ |
| static void mdio_sync(void __iomem *mdio_addr) |
| { |
| int bits = 32; |
| |
| /* Establish sync by sending at least 32 logic ones. */ |
| while (--bits >= 0) { |
| iowrite8(MDIO_WRITE1, mdio_addr); |
| mdio_delay(); |
| iowrite8(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(); |
| } |
| } |
| |
| static int mdio_read(struct net_device *dev, int phy_id, int location) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *mdio_addr = np->base + MIICtrl; |
| int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; |
| int i, retval = 0; |
| |
| if (np->mii_preamble_required) |
| mdio_sync(mdio_addr); |
| |
| /* Shift the read command bits out. */ |
| for (i = 15; i >= 0; i--) { |
| int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
| |
| iowrite8(dataval, mdio_addr); |
| mdio_delay(); |
| iowrite8(dataval | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(); |
| } |
| /* Read the two transition, 16 data, and wire-idle bits. */ |
| for (i = 19; i > 0; i--) { |
| iowrite8(MDIO_EnbIn, mdio_addr); |
| mdio_delay(); |
| retval = (retval << 1) | ((ioread8(mdio_addr) & MDIO_Data) ? 1 : 0); |
| iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(); |
| } |
| return (retval>>1) & 0xffff; |
| } |
| |
| static void mdio_write(struct net_device *dev, int phy_id, int location, int value) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *mdio_addr = np->base + MIICtrl; |
| int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; |
| int i; |
| |
| if (np->mii_preamble_required) |
| mdio_sync(mdio_addr); |
| |
| /* Shift the command bits out. */ |
| for (i = 31; i >= 0; i--) { |
| int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
| |
| iowrite8(dataval, mdio_addr); |
| mdio_delay(); |
| iowrite8(dataval | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(); |
| } |
| /* Clear out extra bits. */ |
| for (i = 2; i > 0; i--) { |
| iowrite8(MDIO_EnbIn, mdio_addr); |
| mdio_delay(); |
| iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(); |
| } |
| } |
| |
| static int mdio_wait_link(struct net_device *dev, int wait) |
| { |
| int bmsr; |
| int phy_id; |
| struct netdev_private *np; |
| |
| np = netdev_priv(dev); |
| phy_id = np->phys[0]; |
| |
| do { |
| bmsr = mdio_read(dev, phy_id, MII_BMSR); |
| if (bmsr & 0x0004) |
| return 0; |
| mdelay(1); |
| } while (--wait > 0); |
| return -1; |
| } |
| |
| static int netdev_open(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| const int irq = np->pci_dev->irq; |
| unsigned long flags; |
| int i; |
| |
| sundance_reset(dev, 0x00ff << 16); |
| |
| i = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev); |
| if (i) |
| return i; |
| |
| if (netif_msg_ifup(np)) |
| printk(KERN_DEBUG "%s: netdev_open() irq %d\n", dev->name, irq); |
| |
| init_ring(dev); |
| |
| iowrite32(np->rx_ring_dma, ioaddr + RxListPtr); |
| /* The Tx list pointer is written as packets are queued. */ |
| |
| /* Initialize other registers. */ |
| __set_mac_addr(dev); |
| #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
| iowrite16(dev->mtu + 18, ioaddr + MaxFrameSize); |
| #else |
| iowrite16(dev->mtu + 14, ioaddr + MaxFrameSize); |
| #endif |
| if (dev->mtu > 2047) |
| iowrite32(ioread32(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl); |
| |
| /* Configure the PCI bus bursts and FIFO thresholds. */ |
| |
| if (dev->if_port == 0) |
| dev->if_port = np->default_port; |
| |
| spin_lock_init(&np->mcastlock); |
| |
| set_rx_mode(dev); |
| iowrite16(0, ioaddr + IntrEnable); |
| iowrite16(0, ioaddr + DownCounter); |
| /* Set the chip to poll every N*320nsec. */ |
| iowrite8(100, ioaddr + RxDMAPollPeriod); |
| iowrite8(127, ioaddr + TxDMAPollPeriod); |
| /* Fix DFE-580TX packet drop issue */ |
| if (np->pci_dev->revision >= 0x14) |
| iowrite8(0x01, ioaddr + DebugCtrl1); |
| netif_start_queue(dev); |
| |
| spin_lock_irqsave(&np->lock, flags); |
| reset_tx(dev); |
| spin_unlock_irqrestore(&np->lock, flags); |
| |
| iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); |
| |
| /* Disable Wol */ |
| iowrite8(ioread8(ioaddr + WakeEvent) | 0x00, ioaddr + WakeEvent); |
| np->wol_enabled = 0; |
| |
| if (netif_msg_ifup(np)) |
| printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x " |
| "MAC Control %x, %4.4x %4.4x.\n", |
| dev->name, ioread32(ioaddr + RxStatus), ioread8(ioaddr + TxStatus), |
| ioread32(ioaddr + MACCtrl0), |
| ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0)); |
| |
| /* Set the timer to check for link beat. */ |
| init_timer(&np->timer); |
| np->timer.expires = jiffies + 3*HZ; |
| np->timer.data = (unsigned long)dev; |
| np->timer.function = netdev_timer; /* timer handler */ |
| add_timer(&np->timer); |
| |
| /* Enable interrupts by setting the interrupt mask. */ |
| iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); |
| |
| return 0; |
| } |
| |
| static void check_duplex(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); |
| int negotiated = mii_lpa & np->mii_if.advertising; |
| int duplex; |
| |
| /* Force media */ |
| if (!np->an_enable || mii_lpa == 0xffff) { |
| if (np->mii_if.full_duplex) |
| iowrite16 (ioread16 (ioaddr + MACCtrl0) | EnbFullDuplex, |
| ioaddr + MACCtrl0); |
| return; |
| } |
| |
| /* Autonegotiation */ |
| duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040; |
| if (np->mii_if.full_duplex != duplex) { |
| np->mii_if.full_duplex = duplex; |
| if (netif_msg_link(np)) |
| printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " |
| "negotiated capability %4.4x.\n", dev->name, |
| duplex ? "full" : "half", np->phys[0], negotiated); |
| iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0); |
| } |
| } |
| |
| static void netdev_timer(unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| int next_tick = 10*HZ; |
| |
| if (netif_msg_timer(np)) { |
| printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, " |
| "Tx %x Rx %x.\n", |
| dev->name, ioread16(ioaddr + IntrEnable), |
| ioread8(ioaddr + TxStatus), ioread32(ioaddr + RxStatus)); |
| } |
| check_duplex(dev); |
| np->timer.expires = jiffies + next_tick; |
| add_timer(&np->timer); |
| } |
| |
| static void tx_timeout(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| unsigned long flag; |
| |
| netif_stop_queue(dev); |
| tasklet_disable(&np->tx_tasklet); |
| iowrite16(0, ioaddr + IntrEnable); |
| printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x " |
| "TxFrameId %2.2x," |
| " resetting...\n", dev->name, ioread8(ioaddr + TxStatus), |
| ioread8(ioaddr + TxFrameId)); |
| |
| { |
| int i; |
| for (i=0; i<TX_RING_SIZE; i++) { |
| printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i, |
| (unsigned long long)(np->tx_ring_dma + i*sizeof(*np->tx_ring)), |
| le32_to_cpu(np->tx_ring[i].next_desc), |
| le32_to_cpu(np->tx_ring[i].status), |
| (le32_to_cpu(np->tx_ring[i].status) >> 2) & 0xff, |
| le32_to_cpu(np->tx_ring[i].frag[0].addr), |
| le32_to_cpu(np->tx_ring[i].frag[0].length)); |
| } |
| printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n", |
| ioread32(np->base + TxListPtr), |
| netif_queue_stopped(dev)); |
| printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n", |
| np->cur_tx, np->cur_tx % TX_RING_SIZE, |
| np->dirty_tx, np->dirty_tx % TX_RING_SIZE); |
| printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx); |
| printk(KERN_DEBUG "cur_task=%d\n", np->cur_task); |
| } |
| spin_lock_irqsave(&np->lock, flag); |
| |
| /* Stop and restart the chip's Tx processes . */ |
| reset_tx(dev); |
| spin_unlock_irqrestore(&np->lock, flag); |
| |
| dev->if_port = 0; |
| |
| dev->trans_start = jiffies; /* prevent tx timeout */ |
| dev->stats.tx_errors++; |
| if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { |
| netif_wake_queue(dev); |
| } |
| iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); |
| tasklet_enable(&np->tx_tasklet); |
| } |
| |
| |
| /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ |
| static void init_ring(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| int i; |
| |
| np->cur_rx = np->cur_tx = 0; |
| np->dirty_rx = np->dirty_tx = 0; |
| np->cur_task = 0; |
| |
| np->rx_buf_sz = (dev->mtu <= 1520 ? PKT_BUF_SZ : dev->mtu + 16); |
| |
| /* Initialize all Rx descriptors. */ |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| np->rx_ring[i].next_desc = cpu_to_le32(np->rx_ring_dma + |
| ((i+1)%RX_RING_SIZE)*sizeof(*np->rx_ring)); |
| np->rx_ring[i].status = 0; |
| np->rx_ring[i].frag[0].length = 0; |
| np->rx_skbuff[i] = NULL; |
| } |
| |
| /* Fill in the Rx buffers. Handle allocation failure gracefully. */ |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| struct sk_buff *skb = |
| netdev_alloc_skb(dev, np->rx_buf_sz + 2); |
| np->rx_skbuff[i] = skb; |
| if (skb == NULL) |
| break; |
| skb_reserve(skb, 2); /* 16 byte align the IP header. */ |
| np->rx_ring[i].frag[0].addr = cpu_to_le32( |
| dma_map_single(&np->pci_dev->dev, skb->data, |
| np->rx_buf_sz, DMA_FROM_DEVICE)); |
| if (dma_mapping_error(&np->pci_dev->dev, |
| np->rx_ring[i].frag[0].addr)) { |
| dev_kfree_skb(skb); |
| np->rx_skbuff[i] = NULL; |
| break; |
| } |
| np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag); |
| } |
| np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); |
| |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| np->tx_skbuff[i] = NULL; |
| np->tx_ring[i].status = 0; |
| } |
| } |
| |
| static void tx_poll (unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct netdev_private *np = netdev_priv(dev); |
| unsigned head = np->cur_task % TX_RING_SIZE; |
| struct netdev_desc *txdesc = |
| &np->tx_ring[(np->cur_tx - 1) % TX_RING_SIZE]; |
| |
| /* Chain the next pointer */ |
| for (; np->cur_tx - np->cur_task > 0; np->cur_task++) { |
| int entry = np->cur_task % TX_RING_SIZE; |
| txdesc = &np->tx_ring[entry]; |
| if (np->last_tx) { |
| np->last_tx->next_desc = cpu_to_le32(np->tx_ring_dma + |
| entry*sizeof(struct netdev_desc)); |
| } |
| np->last_tx = txdesc; |
| } |
| /* Indicate the latest descriptor of tx ring */ |
| txdesc->status |= cpu_to_le32(DescIntrOnTx); |
| |
| if (ioread32 (np->base + TxListPtr) == 0) |
| iowrite32 (np->tx_ring_dma + head * sizeof(struct netdev_desc), |
| np->base + TxListPtr); |
| } |
| |
| static netdev_tx_t |
| start_tx (struct sk_buff *skb, struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| struct netdev_desc *txdesc; |
| unsigned entry; |
| |
| /* Calculate the next Tx descriptor entry. */ |
| entry = np->cur_tx % TX_RING_SIZE; |
| np->tx_skbuff[entry] = skb; |
| txdesc = &np->tx_ring[entry]; |
| |
| txdesc->next_desc = 0; |
| txdesc->status = cpu_to_le32 ((entry << 2) | DisableAlign); |
| txdesc->frag[0].addr = cpu_to_le32(dma_map_single(&np->pci_dev->dev, |
| skb->data, skb->len, DMA_TO_DEVICE)); |
| if (dma_mapping_error(&np->pci_dev->dev, |
| txdesc->frag[0].addr)) |
| goto drop_frame; |
| txdesc->frag[0].length = cpu_to_le32 (skb->len | LastFrag); |
| |
| /* Increment cur_tx before tasklet_schedule() */ |
| np->cur_tx++; |
| mb(); |
| /* Schedule a tx_poll() task */ |
| tasklet_schedule(&np->tx_tasklet); |
| |
| /* On some architectures: explicitly flush cache lines here. */ |
| if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 && |
| !netif_queue_stopped(dev)) { |
| /* do nothing */ |
| } else { |
| netif_stop_queue (dev); |
| } |
| if (netif_msg_tx_queued(np)) { |
| printk (KERN_DEBUG |
| "%s: Transmit frame #%d queued in slot %d.\n", |
| dev->name, np->cur_tx, entry); |
| } |
| return NETDEV_TX_OK; |
| |
| drop_frame: |
| dev_kfree_skb_any(skb); |
| np->tx_skbuff[entry] = NULL; |
| dev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| /* Reset hardware tx and free all of tx buffers */ |
| static int |
| reset_tx (struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| struct sk_buff *skb; |
| int i; |
| |
| /* Reset tx logic, TxListPtr will be cleaned */ |
| iowrite16 (TxDisable, ioaddr + MACCtrl1); |
| sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16); |
| |
| /* free all tx skbuff */ |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| np->tx_ring[i].next_desc = 0; |
| |
| skb = np->tx_skbuff[i]; |
| if (skb) { |
| dma_unmap_single(&np->pci_dev->dev, |
| le32_to_cpu(np->tx_ring[i].frag[0].addr), |
| skb->len, DMA_TO_DEVICE); |
| dev_kfree_skb_any(skb); |
| np->tx_skbuff[i] = NULL; |
| dev->stats.tx_dropped++; |
| } |
| } |
| np->cur_tx = np->dirty_tx = 0; |
| np->cur_task = 0; |
| |
| np->last_tx = NULL; |
| iowrite8(127, ioaddr + TxDMAPollPeriod); |
| |
| iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); |
| return 0; |
| } |
| |
| /* The interrupt handler cleans up after the Tx thread, |
| and schedule a Rx thread work */ |
| static irqreturn_t intr_handler(int irq, void *dev_instance) |
| { |
| struct net_device *dev = (struct net_device *)dev_instance; |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| int hw_frame_id; |
| int tx_cnt; |
| int tx_status; |
| int handled = 0; |
| int i; |
| |
| |
| do { |
| int intr_status = ioread16(ioaddr + IntrStatus); |
| iowrite16(intr_status, ioaddr + IntrStatus); |
| |
| if (netif_msg_intr(np)) |
| printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", |
| dev->name, intr_status); |
| |
| if (!(intr_status & DEFAULT_INTR)) |
| break; |
| |
| handled = 1; |
| |
| if (intr_status & (IntrRxDMADone)) { |
| iowrite16(DEFAULT_INTR & ~(IntrRxDone|IntrRxDMADone), |
| ioaddr + IntrEnable); |
| if (np->budget < 0) |
| np->budget = RX_BUDGET; |
| tasklet_schedule(&np->rx_tasklet); |
| } |
| if (intr_status & (IntrTxDone | IntrDrvRqst)) { |
| tx_status = ioread16 (ioaddr + TxStatus); |
| for (tx_cnt=32; tx_status & 0x80; --tx_cnt) { |
| if (netif_msg_tx_done(np)) |
| printk |
| ("%s: Transmit status is %2.2x.\n", |
| dev->name, tx_status); |
| if (tx_status & 0x1e) { |
| if (netif_msg_tx_err(np)) |
| printk("%s: Transmit error status %4.4x.\n", |
| dev->name, tx_status); |
| dev->stats.tx_errors++; |
| if (tx_status & 0x10) |
| dev->stats.tx_fifo_errors++; |
| if (tx_status & 0x08) |
| dev->stats.collisions++; |
| if (tx_status & 0x04) |
| dev->stats.tx_fifo_errors++; |
| if (tx_status & 0x02) |
| dev->stats.tx_window_errors++; |
| |
| /* |
| ** This reset has been verified on |
| ** DFE-580TX boards ! phdm@macqel.be. |
| */ |
| if (tx_status & 0x10) { /* TxUnderrun */ |
| /* Restart Tx FIFO and transmitter */ |
| sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); |
| /* No need to reset the Tx pointer here */ |
| } |
| /* Restart the Tx. Need to make sure tx enabled */ |
| i = 10; |
| do { |
| iowrite16(ioread16(ioaddr + MACCtrl1) | TxEnable, ioaddr + MACCtrl1); |
| if (ioread16(ioaddr + MACCtrl1) & TxEnabled) |
| break; |
| mdelay(1); |
| } while (--i); |
| } |
| /* Yup, this is a documentation bug. It cost me *hours*. */ |
| iowrite16 (0, ioaddr + TxStatus); |
| if (tx_cnt < 0) { |
| iowrite32(5000, ioaddr + DownCounter); |
| break; |
| } |
| tx_status = ioread16 (ioaddr + TxStatus); |
| } |
| hw_frame_id = (tx_status >> 8) & 0xff; |
| } else { |
| hw_frame_id = ioread8(ioaddr + TxFrameId); |
| } |
| |
| if (np->pci_dev->revision >= 0x14) { |
| spin_lock(&np->lock); |
| for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { |
| int entry = np->dirty_tx % TX_RING_SIZE; |
| struct sk_buff *skb; |
| int sw_frame_id; |
| sw_frame_id = (le32_to_cpu( |
| np->tx_ring[entry].status) >> 2) & 0xff; |
| if (sw_frame_id == hw_frame_id && |
| !(le32_to_cpu(np->tx_ring[entry].status) |
| & 0x00010000)) |
| break; |
| if (sw_frame_id == (hw_frame_id + 1) % |
| TX_RING_SIZE) |
| break; |
| skb = np->tx_skbuff[entry]; |
| /* Free the original skb. */ |
| dma_unmap_single(&np->pci_dev->dev, |
| le32_to_cpu(np->tx_ring[entry].frag[0].addr), |
| skb->len, DMA_TO_DEVICE); |
| dev_kfree_skb_irq (np->tx_skbuff[entry]); |
| np->tx_skbuff[entry] = NULL; |
| np->tx_ring[entry].frag[0].addr = 0; |
| np->tx_ring[entry].frag[0].length = 0; |
| } |
| spin_unlock(&np->lock); |
| } else { |
| spin_lock(&np->lock); |
| for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { |
| int entry = np->dirty_tx % TX_RING_SIZE; |
| struct sk_buff *skb; |
| if (!(le32_to_cpu(np->tx_ring[entry].status) |
| & 0x00010000)) |
| break; |
| skb = np->tx_skbuff[entry]; |
| /* Free the original skb. */ |
| dma_unmap_single(&np->pci_dev->dev, |
| le32_to_cpu(np->tx_ring[entry].frag[0].addr), |
| skb->len, DMA_TO_DEVICE); |
| dev_kfree_skb_irq (np->tx_skbuff[entry]); |
| np->tx_skbuff[entry] = NULL; |
| np->tx_ring[entry].frag[0].addr = 0; |
| np->tx_ring[entry].frag[0].length = 0; |
| } |
| spin_unlock(&np->lock); |
| } |
| |
| if (netif_queue_stopped(dev) && |
| np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { |
| /* The ring is no longer full, clear busy flag. */ |
| netif_wake_queue (dev); |
| } |
| /* Abnormal error summary/uncommon events handlers. */ |
| if (intr_status & (IntrPCIErr | LinkChange | StatsMax)) |
| netdev_error(dev, intr_status); |
| } while (0); |
| if (netif_msg_intr(np)) |
| printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", |
| dev->name, ioread16(ioaddr + IntrStatus)); |
| return IRQ_RETVAL(handled); |
| } |
| |
| static void rx_poll(unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct netdev_private *np = netdev_priv(dev); |
| int entry = np->cur_rx % RX_RING_SIZE; |
| int boguscnt = np->budget; |
| void __iomem *ioaddr = np->base; |
| int received = 0; |
| |
| /* If EOP is set on the next entry, it's a new packet. Send it up. */ |
| while (1) { |
| struct netdev_desc *desc = &(np->rx_ring[entry]); |
| u32 frame_status = le32_to_cpu(desc->status); |
| int pkt_len; |
| |
| if (--boguscnt < 0) { |
| goto not_done; |
| } |
| if (!(frame_status & DescOwn)) |
| break; |
| pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */ |
| if (netif_msg_rx_status(np)) |
| printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", |
| frame_status); |
| if (frame_status & 0x001f4000) { |
| /* There was a error. */ |
| if (netif_msg_rx_err(np)) |
| printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", |
| frame_status); |
| dev->stats.rx_errors++; |
| if (frame_status & 0x00100000) |
| dev->stats.rx_length_errors++; |
| if (frame_status & 0x00010000) |
| dev->stats.rx_fifo_errors++; |
| if (frame_status & 0x00060000) |
| dev->stats.rx_frame_errors++; |
| if (frame_status & 0x00080000) |
| dev->stats.rx_crc_errors++; |
| if (frame_status & 0x00100000) { |
| printk(KERN_WARNING "%s: Oversized Ethernet frame," |
| " status %8.8x.\n", |
| dev->name, frame_status); |
| } |
| } else { |
| struct sk_buff *skb; |
| #ifndef final_version |
| if (netif_msg_rx_status(np)) |
| printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" |
| ", bogus_cnt %d.\n", |
| pkt_len, boguscnt); |
| #endif |
| /* Check if the packet is long enough to accept without copying |
| to a minimally-sized skbuff. */ |
| if (pkt_len < rx_copybreak && |
| (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) { |
| skb_reserve(skb, 2); /* 16 byte align the IP header */ |
| dma_sync_single_for_cpu(&np->pci_dev->dev, |
| le32_to_cpu(desc->frag[0].addr), |
| np->rx_buf_sz, DMA_FROM_DEVICE); |
| skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); |
| dma_sync_single_for_device(&np->pci_dev->dev, |
| le32_to_cpu(desc->frag[0].addr), |
| np->rx_buf_sz, DMA_FROM_DEVICE); |
| skb_put(skb, pkt_len); |
| } else { |
| dma_unmap_single(&np->pci_dev->dev, |
| le32_to_cpu(desc->frag[0].addr), |
| np->rx_buf_sz, DMA_FROM_DEVICE); |
| skb_put(skb = np->rx_skbuff[entry], pkt_len); |
| np->rx_skbuff[entry] = NULL; |
| } |
| skb->protocol = eth_type_trans(skb, dev); |
| /* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */ |
| netif_rx(skb); |
| } |
| entry = (entry + 1) % RX_RING_SIZE; |
| received++; |
| } |
| np->cur_rx = entry; |
| refill_rx (dev); |
| np->budget -= received; |
| iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); |
| return; |
| |
| not_done: |
| np->cur_rx = entry; |
| refill_rx (dev); |
| if (!received) |
| received = 1; |
| np->budget -= received; |
| if (np->budget <= 0) |
| np->budget = RX_BUDGET; |
| tasklet_schedule(&np->rx_tasklet); |
| } |
| |
| static void refill_rx (struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| int entry; |
| int cnt = 0; |
| |
| /* Refill the Rx ring buffers. */ |
| for (;(np->cur_rx - np->dirty_rx + RX_RING_SIZE) % RX_RING_SIZE > 0; |
| np->dirty_rx = (np->dirty_rx + 1) % RX_RING_SIZE) { |
| struct sk_buff *skb; |
| entry = np->dirty_rx % RX_RING_SIZE; |
| if (np->rx_skbuff[entry] == NULL) { |
| skb = netdev_alloc_skb(dev, np->rx_buf_sz + 2); |
| np->rx_skbuff[entry] = skb; |
| if (skb == NULL) |
| break; /* Better luck next round. */ |
| skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
| np->rx_ring[entry].frag[0].addr = cpu_to_le32( |
| dma_map_single(&np->pci_dev->dev, skb->data, |
| np->rx_buf_sz, DMA_FROM_DEVICE)); |
| if (dma_mapping_error(&np->pci_dev->dev, |
| np->rx_ring[entry].frag[0].addr)) { |
| dev_kfree_skb_irq(skb); |
| np->rx_skbuff[entry] = NULL; |
| break; |
| } |
| } |
| /* Perhaps we need not reset this field. */ |
| np->rx_ring[entry].frag[0].length = |
| cpu_to_le32(np->rx_buf_sz | LastFrag); |
| np->rx_ring[entry].status = 0; |
| cnt++; |
| } |
| } |
| static void netdev_error(struct net_device *dev, int intr_status) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| u16 mii_ctl, mii_advertise, mii_lpa; |
| int speed; |
| |
| if (intr_status & LinkChange) { |
| if (mdio_wait_link(dev, 10) == 0) { |
| printk(KERN_INFO "%s: Link up\n", dev->name); |
| if (np->an_enable) { |
| mii_advertise = mdio_read(dev, np->phys[0], |
| MII_ADVERTISE); |
| mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); |
| mii_advertise &= mii_lpa; |
| printk(KERN_INFO "%s: Link changed: ", |
| dev->name); |
| if (mii_advertise & ADVERTISE_100FULL) { |
| np->speed = 100; |
| printk("100Mbps, full duplex\n"); |
| } else if (mii_advertise & ADVERTISE_100HALF) { |
| np->speed = 100; |
| printk("100Mbps, half duplex\n"); |
| } else if (mii_advertise & ADVERTISE_10FULL) { |
| np->speed = 10; |
| printk("10Mbps, full duplex\n"); |
| } else if (mii_advertise & ADVERTISE_10HALF) { |
| np->speed = 10; |
| printk("10Mbps, half duplex\n"); |
| } else |
| printk("\n"); |
| |
| } else { |
| mii_ctl = mdio_read(dev, np->phys[0], MII_BMCR); |
| speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10; |
| np->speed = speed; |
| printk(KERN_INFO "%s: Link changed: %dMbps ,", |
| dev->name, speed); |
| printk("%s duplex.\n", |
| (mii_ctl & BMCR_FULLDPLX) ? |
| "full" : "half"); |
| } |
| check_duplex(dev); |
| if (np->flowctrl && np->mii_if.full_duplex) { |
| iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200, |
| ioaddr + MulticastFilter1+2); |
| iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl, |
| ioaddr + MACCtrl0); |
| } |
| netif_carrier_on(dev); |
| } else { |
| printk(KERN_INFO "%s: Link down\n", dev->name); |
| netif_carrier_off(dev); |
| } |
| } |
| if (intr_status & StatsMax) { |
| get_stats(dev); |
| } |
| if (intr_status & IntrPCIErr) { |
| printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", |
| dev->name, intr_status); |
| /* We must do a global reset of DMA to continue. */ |
| } |
| } |
| |
| static struct net_device_stats *get_stats(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| unsigned long flags; |
| u8 late_coll, single_coll, mult_coll; |
| |
| spin_lock_irqsave(&np->statlock, flags); |
| /* The chip only need report frame silently dropped. */ |
| dev->stats.rx_missed_errors += ioread8(ioaddr + RxMissed); |
| dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK); |
| dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK); |
| dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError); |
| |
| mult_coll = ioread8(ioaddr + StatsMultiColl); |
| np->xstats.tx_multiple_collisions += mult_coll; |
| single_coll = ioread8(ioaddr + StatsOneColl); |
| np->xstats.tx_single_collisions += single_coll; |
| late_coll = ioread8(ioaddr + StatsLateColl); |
| np->xstats.tx_late_collisions += late_coll; |
| dev->stats.collisions += mult_coll |
| + single_coll |
| + late_coll; |
| |
| np->xstats.tx_deferred += ioread8(ioaddr + StatsTxDefer); |
| np->xstats.tx_deferred_excessive += ioread8(ioaddr + StatsTxXSDefer); |
| np->xstats.tx_aborted += ioread8(ioaddr + StatsTxAbort); |
| np->xstats.tx_bcasts += ioread8(ioaddr + StatsBcastTx); |
| np->xstats.rx_bcasts += ioread8(ioaddr + StatsBcastRx); |
| np->xstats.tx_mcasts += ioread8(ioaddr + StatsMcastTx); |
| np->xstats.rx_mcasts += ioread8(ioaddr + StatsMcastRx); |
| |
| dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow); |
| dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16; |
| dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow); |
| dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16; |
| |
| spin_unlock_irqrestore(&np->statlock, flags); |
| |
| return &dev->stats; |
| } |
| |
| static void set_rx_mode(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| u16 mc_filter[4]; /* Multicast hash filter */ |
| u32 rx_mode; |
| int i; |
| |
| if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ |
| memset(mc_filter, 0xff, sizeof(mc_filter)); |
| rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys; |
| } else if ((netdev_mc_count(dev) > multicast_filter_limit) || |
| (dev->flags & IFF_ALLMULTI)) { |
| /* Too many to match, or accept all multicasts. */ |
| memset(mc_filter, 0xff, sizeof(mc_filter)); |
| rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; |
| } else if (!netdev_mc_empty(dev)) { |
| struct netdev_hw_addr *ha; |
| int bit; |
| int index; |
| int crc; |
| memset (mc_filter, 0, sizeof (mc_filter)); |
| netdev_for_each_mc_addr(ha, dev) { |
| crc = ether_crc_le(ETH_ALEN, ha->addr); |
| for (index=0, bit=0; bit < 6; bit++, crc <<= 1) |
| if (crc & 0x80000000) index |= 1 << bit; |
| mc_filter[index/16] |= (1 << (index % 16)); |
| } |
| rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys; |
| } else { |
| iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); |
| return; |
| } |
| if (np->mii_if.full_duplex && np->flowctrl) |
| mc_filter[3] |= 0x0200; |
| |
| for (i = 0; i < 4; i++) |
| iowrite16(mc_filter[i], ioaddr + MulticastFilter0 + i*2); |
| iowrite8(rx_mode, ioaddr + RxMode); |
| } |
| |
| static int __set_mac_addr(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| u16 addr16; |
| |
| addr16 = (dev->dev_addr[0] | (dev->dev_addr[1] << 8)); |
| iowrite16(addr16, np->base + StationAddr); |
| addr16 = (dev->dev_addr[2] | (dev->dev_addr[3] << 8)); |
| iowrite16(addr16, np->base + StationAddr+2); |
| addr16 = (dev->dev_addr[4] | (dev->dev_addr[5] << 8)); |
| iowrite16(addr16, np->base + StationAddr+4); |
| return 0; |
| } |
| |
| /* Invoked with rtnl_lock held */ |
| static int sundance_set_mac_addr(struct net_device *dev, void *data) |
| { |
| const struct sockaddr *addr = data; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| __set_mac_addr(dev); |
| |
| return 0; |
| } |
| |
| static const struct { |
| const char name[ETH_GSTRING_LEN]; |
| } sundance_stats[] = { |
| { "tx_multiple_collisions" }, |
| { "tx_single_collisions" }, |
| { "tx_late_collisions" }, |
| { "tx_deferred" }, |
| { "tx_deferred_excessive" }, |
| { "tx_aborted" }, |
| { "tx_bcasts" }, |
| { "rx_bcasts" }, |
| { "tx_mcasts" }, |
| { "rx_mcasts" }, |
| }; |
| |
| static int check_if_running(struct net_device *dev) |
| { |
| if (!netif_running(dev)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); |
| } |
| |
| static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| spin_lock_irq(&np->lock); |
| mii_ethtool_gset(&np->mii_if, ecmd); |
| spin_unlock_irq(&np->lock); |
| return 0; |
| } |
| |
| static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| int res; |
| spin_lock_irq(&np->lock); |
| res = mii_ethtool_sset(&np->mii_if, ecmd); |
| spin_unlock_irq(&np->lock); |
| return res; |
| } |
| |
| static int nway_reset(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| return mii_nway_restart(&np->mii_if); |
| } |
| |
| static u32 get_link(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| return mii_link_ok(&np->mii_if); |
| } |
| |
| static u32 get_msglevel(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| return np->msg_enable; |
| } |
| |
| static void set_msglevel(struct net_device *dev, u32 val) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| np->msg_enable = val; |
| } |
| |
| static void get_strings(struct net_device *dev, u32 stringset, |
| u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(data, sundance_stats, sizeof(sundance_stats)); |
| } |
| |
| static int get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| return ARRAY_SIZE(sundance_stats); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static void get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| int i = 0; |
| |
| get_stats(dev); |
| data[i++] = np->xstats.tx_multiple_collisions; |
| data[i++] = np->xstats.tx_single_collisions; |
| data[i++] = np->xstats.tx_late_collisions; |
| data[i++] = np->xstats.tx_deferred; |
| data[i++] = np->xstats.tx_deferred_excessive; |
| data[i++] = np->xstats.tx_aborted; |
| data[i++] = np->xstats.tx_bcasts; |
| data[i++] = np->xstats.rx_bcasts; |
| data[i++] = np->xstats.tx_mcasts; |
| data[i++] = np->xstats.rx_mcasts; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static void sundance_get_wol(struct net_device *dev, |
| struct ethtool_wolinfo *wol) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| u8 wol_bits; |
| |
| wol->wolopts = 0; |
| |
| wol->supported = (WAKE_PHY | WAKE_MAGIC); |
| if (!np->wol_enabled) |
| return; |
| |
| wol_bits = ioread8(ioaddr + WakeEvent); |
| if (wol_bits & MagicPktEnable) |
| wol->wolopts |= WAKE_MAGIC; |
| if (wol_bits & LinkEventEnable) |
| wol->wolopts |= WAKE_PHY; |
| } |
| |
| static int sundance_set_wol(struct net_device *dev, |
| struct ethtool_wolinfo *wol) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| u8 wol_bits; |
| |
| if (!device_can_wakeup(&np->pci_dev->dev)) |
| return -EOPNOTSUPP; |
| |
| np->wol_enabled = !!(wol->wolopts); |
| wol_bits = ioread8(ioaddr + WakeEvent); |
| wol_bits &= ~(WakePktEnable | MagicPktEnable | |
| LinkEventEnable | WolEnable); |
| |
| if (np->wol_enabled) { |
| if (wol->wolopts & WAKE_MAGIC) |
| wol_bits |= (MagicPktEnable | WolEnable); |
| if (wol->wolopts & WAKE_PHY) |
| wol_bits |= (LinkEventEnable | WolEnable); |
| } |
| iowrite8(wol_bits, ioaddr + WakeEvent); |
| |
| device_set_wakeup_enable(&np->pci_dev->dev, np->wol_enabled); |
| |
| return 0; |
| } |
| #else |
| #define sundance_get_wol NULL |
| #define sundance_set_wol NULL |
| #endif /* CONFIG_PM */ |
| |
| static const struct ethtool_ops ethtool_ops = { |
| .begin = check_if_running, |
| .get_drvinfo = get_drvinfo, |
| .get_settings = get_settings, |
| .set_settings = set_settings, |
| .nway_reset = nway_reset, |
| .get_link = get_link, |
| .get_wol = sundance_get_wol, |
| .set_wol = sundance_set_wol, |
| .get_msglevel = get_msglevel, |
| .set_msglevel = set_msglevel, |
| .get_strings = get_strings, |
| .get_sset_count = get_sset_count, |
| .get_ethtool_stats = get_ethtool_stats, |
| }; |
| |
| static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| int rc; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| spin_lock_irq(&np->lock); |
| rc = generic_mii_ioctl(&np->mii_if, if_mii(rq), cmd, NULL); |
| spin_unlock_irq(&np->lock); |
| |
| return rc; |
| } |
| |
| static int netdev_close(struct net_device *dev) |
| { |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| struct sk_buff *skb; |
| int i; |
| |
| /* Wait and kill tasklet */ |
| tasklet_kill(&np->rx_tasklet); |
| tasklet_kill(&np->tx_tasklet); |
| np->cur_tx = 0; |
| np->dirty_tx = 0; |
| np->cur_task = 0; |
| np->last_tx = NULL; |
| |
| netif_stop_queue(dev); |
| |
| if (netif_msg_ifdown(np)) { |
| printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x " |
| "Rx %4.4x Int %2.2x.\n", |
| dev->name, ioread8(ioaddr + TxStatus), |
| ioread32(ioaddr + RxStatus), ioread16(ioaddr + IntrStatus)); |
| printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", |
| dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); |
| } |
| |
| /* Disable interrupts by clearing the interrupt mask. */ |
| iowrite16(0x0000, ioaddr + IntrEnable); |
| |
| /* Disable Rx and Tx DMA for safely release resource */ |
| iowrite32(0x500, ioaddr + DMACtrl); |
| |
| /* Stop the chip's Tx and Rx processes. */ |
| iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); |
| |
| for (i = 2000; i > 0; i--) { |
| if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0) |
| break; |
| mdelay(1); |
| } |
| |
| iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset, |
| ioaddr + ASIC_HI_WORD(ASICCtrl)); |
| |
| for (i = 2000; i > 0; i--) { |
| if ((ioread16(ioaddr + ASIC_HI_WORD(ASICCtrl)) & ResetBusy) == 0) |
| break; |
| mdelay(1); |
| } |
| |
| #ifdef __i386__ |
| if (netif_msg_hw(np)) { |
| printk(KERN_DEBUG " Tx ring at %8.8x:\n", |
| (int)(np->tx_ring_dma)); |
| for (i = 0; i < TX_RING_SIZE; i++) |
| printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", |
| i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, |
| np->tx_ring[i].frag[0].length); |
| printk(KERN_DEBUG " Rx ring %8.8x:\n", |
| (int)(np->rx_ring_dma)); |
| for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { |
| printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", |
| i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr, |
| np->rx_ring[i].frag[0].length); |
| } |
| } |
| #endif /* __i386__ debugging only */ |
| |
| free_irq(np->pci_dev->irq, dev); |
| |
| del_timer_sync(&np->timer); |
| |
| /* Free all the skbuffs in the Rx queue. */ |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| np->rx_ring[i].status = 0; |
| skb = np->rx_skbuff[i]; |
| if (skb) { |
| dma_unmap_single(&np->pci_dev->dev, |
| le32_to_cpu(np->rx_ring[i].frag[0].addr), |
| np->rx_buf_sz, DMA_FROM_DEVICE); |
| dev_kfree_skb(skb); |
| np->rx_skbuff[i] = NULL; |
| } |
| np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */ |
| } |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| np->tx_ring[i].next_desc = 0; |
| skb = np->tx_skbuff[i]; |
| if (skb) { |
| dma_unmap_single(&np->pci_dev->dev, |
| le32_to_cpu(np->tx_ring[i].frag[0].addr), |
| skb->len, DMA_TO_DEVICE); |
| dev_kfree_skb(skb); |
| np->tx_skbuff[i] = NULL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void sundance_remove1(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (dev) { |
| struct netdev_private *np = netdev_priv(dev); |
| unregister_netdev(dev); |
| dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, |
| np->rx_ring, np->rx_ring_dma); |
| dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, |
| np->tx_ring, np->tx_ring_dma); |
| pci_iounmap(pdev, np->base); |
| pci_release_regions(pdev); |
| free_netdev(dev); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int sundance_suspend(struct pci_dev *pci_dev, pm_message_t state) |
| { |
| struct net_device *dev = pci_get_drvdata(pci_dev); |
| struct netdev_private *np = netdev_priv(dev); |
| void __iomem *ioaddr = np->base; |
| |
| if (!netif_running(dev)) |
| return 0; |
| |
| netdev_close(dev); |
| netif_device_detach(dev); |
| |
| pci_save_state(pci_dev); |
| if (np->wol_enabled) { |
| iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); |
| iowrite16(RxEnable, ioaddr + MACCtrl1); |
| } |
| pci_enable_wake(pci_dev, pci_choose_state(pci_dev, state), |
| np->wol_enabled); |
| pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); |
| |
| return 0; |
| } |
| |
| static int sundance_resume(struct pci_dev *pci_dev) |
| { |
| struct net_device *dev = pci_get_drvdata(pci_dev); |
| int err = 0; |
| |
| if (!netif_running(dev)) |
| return 0; |
| |
| pci_set_power_state(pci_dev, PCI_D0); |
| pci_restore_state(pci_dev); |
| pci_enable_wake(pci_dev, PCI_D0, 0); |
| |
| err = netdev_open(dev); |
| if (err) { |
| printk(KERN_ERR "%s: Can't resume interface!\n", |
| dev->name); |
| goto out; |
| } |
| |
| netif_device_attach(dev); |
| |
| out: |
| return err; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| static struct pci_driver sundance_driver = { |
| .name = DRV_NAME, |
| .id_table = sundance_pci_tbl, |
| .probe = sundance_probe1, |
| .remove = sundance_remove1, |
| #ifdef CONFIG_PM |
| .suspend = sundance_suspend, |
| .resume = sundance_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| static int __init sundance_init(void) |
| { |
| /* when a module, this is printed whether or not devices are found in probe */ |
| #ifdef MODULE |
| printk(version); |
| #endif |
| return pci_register_driver(&sundance_driver); |
| } |
| |
| static void __exit sundance_exit(void) |
| { |
| pci_unregister_driver(&sundance_driver); |
| } |
| |
| module_init(sundance_init); |
| module_exit(sundance_exit); |
| |
| |