| /* |
| * |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| * Copyright (c) 2003-2012, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/mei.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "mei_dev.h" |
| #include "hbm.h" |
| #include "client.h" |
| |
| static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status) |
| { |
| #define MEI_CL_CS(status) case MEI_CL_CONN_##status: return #status |
| switch (status) { |
| MEI_CL_CS(SUCCESS); |
| MEI_CL_CS(NOT_FOUND); |
| MEI_CL_CS(ALREADY_STARTED); |
| MEI_CL_CS(OUT_OF_RESOURCES); |
| MEI_CL_CS(MESSAGE_SMALL); |
| default: return "unknown"; |
| } |
| #undef MEI_CL_CCS |
| } |
| |
| /** |
| * mei_cl_conn_status_to_errno - convert client connect response |
| * status to error code |
| * |
| * @status: client connect response status |
| * |
| * returns corresponding error code |
| */ |
| static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status) |
| { |
| switch (status) { |
| case MEI_CL_CONN_SUCCESS: return 0; |
| case MEI_CL_CONN_NOT_FOUND: return -ENOTTY; |
| case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY; |
| case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY; |
| case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL; |
| default: return -EINVAL; |
| } |
| } |
| |
| /** |
| * mei_hbm_idle - set hbm to idle state |
| * |
| * @dev: the device structure |
| */ |
| void mei_hbm_idle(struct mei_device *dev) |
| { |
| dev->init_clients_timer = 0; |
| dev->hbm_state = MEI_HBM_IDLE; |
| } |
| |
| /** |
| * mei_hbm_reset - reset hbm counters and book keeping data structurs |
| * |
| * @dev: the device structure |
| */ |
| void mei_hbm_reset(struct mei_device *dev) |
| { |
| dev->me_clients_num = 0; |
| dev->me_client_presentation_num = 0; |
| dev->me_client_index = 0; |
| |
| kfree(dev->me_clients); |
| dev->me_clients = NULL; |
| |
| mei_hbm_idle(dev); |
| } |
| |
| /** |
| * mei_hbm_me_cl_allocate - allocates storage for me clients |
| * |
| * @dev: the device structure |
| * |
| * returns 0 on success -ENOMEM on allocation failure |
| */ |
| static int mei_hbm_me_cl_allocate(struct mei_device *dev) |
| { |
| struct mei_me_client *clients; |
| int b; |
| |
| mei_hbm_reset(dev); |
| |
| /* count how many ME clients we have */ |
| for_each_set_bit(b, dev->me_clients_map, MEI_CLIENTS_MAX) |
| dev->me_clients_num++; |
| |
| if (dev->me_clients_num == 0) |
| return 0; |
| |
| dev_dbg(&dev->pdev->dev, "memory allocation for ME clients size=%ld.\n", |
| dev->me_clients_num * sizeof(struct mei_me_client)); |
| /* allocate storage for ME clients representation */ |
| clients = kcalloc(dev->me_clients_num, |
| sizeof(struct mei_me_client), GFP_KERNEL); |
| if (!clients) { |
| dev_err(&dev->pdev->dev, "memory allocation for ME clients failed.\n"); |
| return -ENOMEM; |
| } |
| dev->me_clients = clients; |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_cl_hdr - construct client hbm header |
| * |
| * @cl: - client |
| * @hbm_cmd: host bus message command |
| * @buf: buffer for cl header |
| * @len: buffer length |
| */ |
| static inline |
| void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len) |
| { |
| struct mei_hbm_cl_cmd *cmd = buf; |
| |
| memset(cmd, 0, len); |
| |
| cmd->hbm_cmd = hbm_cmd; |
| cmd->host_addr = cl->host_client_id; |
| cmd->me_addr = cl->me_client_id; |
| } |
| |
| /** |
| * mei_hbm_cl_addr_equal - tells if they have the same address |
| * |
| * @cl: - client |
| * @buf: buffer with cl header |
| * |
| * returns true if addresses are the same |
| */ |
| static inline |
| bool mei_hbm_cl_addr_equal(struct mei_cl *cl, void *buf) |
| { |
| struct mei_hbm_cl_cmd *cmd = buf; |
| return cl->host_client_id == cmd->host_addr && |
| cl->me_client_id == cmd->me_addr; |
| } |
| |
| |
| int mei_hbm_start_wait(struct mei_device *dev) |
| { |
| int ret; |
| if (dev->hbm_state > MEI_HBM_START) |
| return 0; |
| |
| mutex_unlock(&dev->device_lock); |
| ret = wait_event_interruptible_timeout(dev->wait_recvd_msg, |
| dev->hbm_state == MEI_HBM_IDLE || |
| dev->hbm_state >= MEI_HBM_STARTED, |
| mei_secs_to_jiffies(MEI_HBM_TIMEOUT)); |
| mutex_lock(&dev->device_lock); |
| |
| if (ret <= 0 && (dev->hbm_state <= MEI_HBM_START)) { |
| dev->hbm_state = MEI_HBM_IDLE; |
| dev_err(&dev->pdev->dev, "waiting for mei start failed\n"); |
| return -ETIME; |
| } |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_start_req - sends start request message. |
| * |
| * @dev: the device structure |
| * |
| * returns 0 on success and < 0 on failure |
| */ |
| int mei_hbm_start_req(struct mei_device *dev) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| struct hbm_host_version_request *start_req; |
| const size_t len = sizeof(struct hbm_host_version_request); |
| int ret; |
| |
| mei_hbm_hdr(mei_hdr, len); |
| |
| /* host start message */ |
| start_req = (struct hbm_host_version_request *)dev->wr_msg.data; |
| memset(start_req, 0, len); |
| start_req->hbm_cmd = HOST_START_REQ_CMD; |
| start_req->host_version.major_version = HBM_MAJOR_VERSION; |
| start_req->host_version.minor_version = HBM_MINOR_VERSION; |
| |
| dev->hbm_state = MEI_HBM_IDLE; |
| ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| if (ret) { |
| dev_err(&dev->pdev->dev, "version message write failed: ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| dev->hbm_state = MEI_HBM_START; |
| dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; |
| return 0; |
| } |
| |
| /* |
| * mei_hbm_enum_clients_req - sends enumeration client request message. |
| * |
| * @dev: the device structure |
| * |
| * returns 0 on success and < 0 on failure |
| */ |
| static int mei_hbm_enum_clients_req(struct mei_device *dev) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| struct hbm_host_enum_request *enum_req; |
| const size_t len = sizeof(struct hbm_host_enum_request); |
| int ret; |
| |
| /* enumerate clients */ |
| mei_hbm_hdr(mei_hdr, len); |
| |
| enum_req = (struct hbm_host_enum_request *)dev->wr_msg.data; |
| memset(enum_req, 0, len); |
| enum_req->hbm_cmd = HOST_ENUM_REQ_CMD; |
| |
| ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| if (ret) { |
| dev_err(&dev->pdev->dev, "enumeration request write failed: ret = %d.\n", |
| ret); |
| return ret; |
| } |
| dev->hbm_state = MEI_HBM_ENUM_CLIENTS; |
| dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_prop_req - request property for a single client |
| * |
| * @dev: the device structure |
| * |
| * returns 0 on success and < 0 on failure |
| */ |
| |
| static int mei_hbm_prop_req(struct mei_device *dev) |
| { |
| |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| struct hbm_props_request *prop_req; |
| const size_t len = sizeof(struct hbm_props_request); |
| unsigned long next_client_index; |
| unsigned long client_num; |
| int ret; |
| |
| client_num = dev->me_client_presentation_num; |
| |
| next_client_index = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, |
| dev->me_client_index); |
| |
| /* We got all client properties */ |
| if (next_client_index == MEI_CLIENTS_MAX) { |
| dev->hbm_state = MEI_HBM_STARTED; |
| schedule_work(&dev->init_work); |
| |
| return 0; |
| } |
| |
| dev->me_clients[client_num].client_id = next_client_index; |
| dev->me_clients[client_num].mei_flow_ctrl_creds = 0; |
| |
| mei_hbm_hdr(mei_hdr, len); |
| prop_req = (struct hbm_props_request *)dev->wr_msg.data; |
| |
| memset(prop_req, 0, sizeof(struct hbm_props_request)); |
| |
| |
| prop_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD; |
| prop_req->address = next_client_index; |
| |
| ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| if (ret) { |
| dev_err(&dev->pdev->dev, "properties request write failed: ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; |
| dev->me_client_index = next_client_index; |
| |
| return 0; |
| } |
| |
| /* |
| * mei_hbm_pg - sends pg command |
| * |
| * @dev: the device structure |
| * @pg_cmd: the pg command code |
| * |
| * This function returns -EIO on write failure |
| */ |
| int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| struct hbm_power_gate *req; |
| const size_t len = sizeof(struct hbm_power_gate); |
| int ret; |
| |
| mei_hbm_hdr(mei_hdr, len); |
| |
| req = (struct hbm_power_gate *)dev->wr_msg.data; |
| memset(req, 0, len); |
| req->hbm_cmd = pg_cmd; |
| |
| ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| if (ret) |
| dev_err(&dev->pdev->dev, "power gate command write failed.\n"); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mei_hbm_pg); |
| |
| /** |
| * mei_hbm_stop_req - send stop request message |
| * |
| * @dev - mei device |
| * @cl: client info |
| * |
| * This function returns -EIO on write failure |
| */ |
| static int mei_hbm_stop_req(struct mei_device *dev) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| struct hbm_host_stop_request *req = |
| (struct hbm_host_stop_request *)dev->wr_msg.data; |
| const size_t len = sizeof(struct hbm_host_stop_request); |
| |
| mei_hbm_hdr(mei_hdr, len); |
| |
| memset(req, 0, len); |
| req->hbm_cmd = HOST_STOP_REQ_CMD; |
| req->reason = DRIVER_STOP_REQUEST; |
| |
| return mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| } |
| |
| /** |
| * mei_hbm_cl_flow_control_req - sends flow control request. |
| * |
| * @dev: the device structure |
| * @cl: client info |
| * |
| * This function returns -EIO on write failure |
| */ |
| int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| const size_t len = sizeof(struct hbm_flow_control); |
| |
| mei_hbm_hdr(mei_hdr, len); |
| mei_hbm_cl_hdr(cl, MEI_FLOW_CONTROL_CMD, dev->wr_msg.data, len); |
| |
| cl_dbg(dev, cl, "sending flow control\n"); |
| |
| return mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| } |
| |
| /** |
| * mei_hbm_add_single_flow_creds - adds single buffer credentials. |
| * |
| * @dev: the device structure |
| * @flow: flow control. |
| * |
| * return 0 on success, < 0 otherwise |
| */ |
| static int mei_hbm_add_single_flow_creds(struct mei_device *dev, |
| struct hbm_flow_control *flow) |
| { |
| struct mei_me_client *me_cl; |
| int id; |
| |
| id = mei_me_cl_by_id(dev, flow->me_addr); |
| if (id < 0) { |
| dev_err(&dev->pdev->dev, "no such me client %d\n", |
| flow->me_addr); |
| return id; |
| } |
| |
| me_cl = &dev->me_clients[id]; |
| if (me_cl->props.single_recv_buf) { |
| me_cl->mei_flow_ctrl_creds++; |
| dev_dbg(&dev->pdev->dev, "recv flow ctrl msg ME %d (single).\n", |
| flow->me_addr); |
| dev_dbg(&dev->pdev->dev, "flow control credentials =%d.\n", |
| me_cl->mei_flow_ctrl_creds); |
| } else { |
| BUG(); /* error in flow control */ |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_cl_flow_control_res - flow control response from me |
| * |
| * @dev: the device structure |
| * @flow_control: flow control response bus message |
| */ |
| static void mei_hbm_cl_flow_control_res(struct mei_device *dev, |
| struct hbm_flow_control *flow_control) |
| { |
| struct mei_cl *cl; |
| |
| if (!flow_control->host_addr) { |
| /* single receive buffer */ |
| mei_hbm_add_single_flow_creds(dev, flow_control); |
| return; |
| } |
| |
| /* normal connection */ |
| list_for_each_entry(cl, &dev->file_list, link) { |
| if (mei_hbm_cl_addr_equal(cl, flow_control)) { |
| cl->mei_flow_ctrl_creds++; |
| dev_dbg(&dev->pdev->dev, "flow ctrl msg for host %d ME %d.\n", |
| flow_control->host_addr, flow_control->me_addr); |
| dev_dbg(&dev->pdev->dev, "flow control credentials = %d.\n", |
| cl->mei_flow_ctrl_creds); |
| break; |
| } |
| } |
| } |
| |
| |
| /** |
| * mei_hbm_cl_disconnect_req - sends disconnect message to fw. |
| * |
| * @dev: the device structure |
| * @cl: a client to disconnect from |
| * |
| * This function returns -EIO on write failure |
| */ |
| int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| const size_t len = sizeof(struct hbm_client_connect_request); |
| |
| mei_hbm_hdr(mei_hdr, len); |
| mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_REQ_CMD, dev->wr_msg.data, len); |
| |
| return mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| } |
| |
| /** |
| * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW |
| * |
| * @dev: the device structure |
| * @cl: a client to disconnect from |
| * |
| * This function returns -EIO on write failure |
| */ |
| int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| const size_t len = sizeof(struct hbm_client_connect_response); |
| |
| mei_hbm_hdr(mei_hdr, len); |
| mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_RES_CMD, dev->wr_msg.data, len); |
| |
| return mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| } |
| |
| /** |
| * mei_hbm_cl_disconnect_res - disconnect response from ME |
| * |
| * @dev: the device structure |
| * @rs: disconnect response bus message |
| */ |
| static void mei_hbm_cl_disconnect_res(struct mei_device *dev, |
| struct hbm_client_connect_response *rs) |
| { |
| struct mei_cl *cl; |
| struct mei_cl_cb *cb, *next; |
| |
| dev_dbg(&dev->pdev->dev, "hbm: disconnect response cl:host=%02d me=%02d status=%d\n", |
| rs->me_addr, rs->host_addr, rs->status); |
| |
| list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list.list, list) { |
| cl = cb->cl; |
| |
| /* this should not happen */ |
| if (WARN_ON(!cl)) { |
| list_del(&cb->list); |
| return; |
| } |
| |
| if (mei_hbm_cl_addr_equal(cl, rs)) { |
| list_del(&cb->list); |
| if (rs->status == MEI_CL_DISCONN_SUCCESS) |
| cl->state = MEI_FILE_DISCONNECTED; |
| |
| cl->status = 0; |
| cl->timer_count = 0; |
| break; |
| } |
| } |
| } |
| |
| /** |
| * mei_hbm_cl_connect_req - send connection request to specific me client |
| * |
| * @dev: the device structure |
| * @cl: a client to connect to |
| * |
| * returns -EIO on write failure |
| */ |
| int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl) |
| { |
| struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; |
| const size_t len = sizeof(struct hbm_client_connect_request); |
| |
| mei_hbm_hdr(mei_hdr, len); |
| mei_hbm_cl_hdr(cl, CLIENT_CONNECT_REQ_CMD, dev->wr_msg.data, len); |
| |
| return mei_write_message(dev, mei_hdr, dev->wr_msg.data); |
| } |
| |
| /** |
| * mei_hbm_cl_connect_res - connect response from the ME |
| * |
| * @dev: the device structure |
| * @rs: connect response bus message |
| */ |
| static void mei_hbm_cl_connect_res(struct mei_device *dev, |
| struct hbm_client_connect_response *rs) |
| { |
| |
| struct mei_cl *cl; |
| struct mei_cl_cb *cb, *next; |
| |
| dev_dbg(&dev->pdev->dev, "hbm: connect response cl:host=%02d me=%02d status=%s\n", |
| rs->me_addr, rs->host_addr, |
| mei_cl_conn_status_str(rs->status)); |
| |
| cl = NULL; |
| |
| list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list.list, list) { |
| |
| cl = cb->cl; |
| /* this should not happen */ |
| if (WARN_ON(!cl)) { |
| list_del_init(&cb->list); |
| continue; |
| } |
| |
| if (cb->fop_type != MEI_FOP_CONNECT) |
| continue; |
| |
| if (mei_hbm_cl_addr_equal(cl, rs)) { |
| list_del(&cb->list); |
| break; |
| } |
| } |
| |
| if (!cl) |
| return; |
| |
| cl->timer_count = 0; |
| if (rs->status == MEI_CL_CONN_SUCCESS) |
| cl->state = MEI_FILE_CONNECTED; |
| else |
| cl->state = MEI_FILE_DISCONNECTED; |
| cl->status = mei_cl_conn_status_to_errno(rs->status); |
| } |
| |
| |
| /** |
| * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware |
| * host sends disconnect response |
| * |
| * @dev: the device structure. |
| * @disconnect_req: disconnect request bus message from the me |
| * |
| * returns -ENOMEM on allocation failure |
| */ |
| static int mei_hbm_fw_disconnect_req(struct mei_device *dev, |
| struct hbm_client_connect_request *disconnect_req) |
| { |
| struct mei_cl *cl; |
| struct mei_cl_cb *cb; |
| |
| list_for_each_entry(cl, &dev->file_list, link) { |
| if (mei_hbm_cl_addr_equal(cl, disconnect_req)) { |
| dev_dbg(&dev->pdev->dev, "disconnect request host client %d ME client %d.\n", |
| disconnect_req->host_addr, |
| disconnect_req->me_addr); |
| cl->state = MEI_FILE_DISCONNECTED; |
| cl->timer_count = 0; |
| |
| cb = mei_io_cb_init(cl, NULL); |
| if (!cb) |
| return -ENOMEM; |
| cb->fop_type = MEI_FOP_DISCONNECT_RSP; |
| cl_dbg(dev, cl, "add disconnect response as first\n"); |
| list_add(&cb->list, &dev->ctrl_wr_list.list); |
| |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| |
| /** |
| * mei_hbm_version_is_supported - checks whether the driver can |
| * support the hbm version of the device |
| * |
| * @dev: the device structure |
| * returns true if driver can support hbm version of the device |
| */ |
| bool mei_hbm_version_is_supported(struct mei_device *dev) |
| { |
| return (dev->version.major_version < HBM_MAJOR_VERSION) || |
| (dev->version.major_version == HBM_MAJOR_VERSION && |
| dev->version.minor_version <= HBM_MINOR_VERSION); |
| } |
| |
| /** |
| * mei_hbm_dispatch - bottom half read routine after ISR to |
| * handle the read bus message cmd processing. |
| * |
| * @dev: the device structure |
| * @mei_hdr: header of bus message |
| * |
| * returns 0 on success and < 0 on failure |
| */ |
| int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) |
| { |
| struct mei_bus_message *mei_msg; |
| struct mei_me_client *me_client; |
| struct hbm_host_version_response *version_res; |
| struct hbm_client_connect_response *connect_res; |
| struct hbm_client_connect_response *disconnect_res; |
| struct hbm_client_connect_request *disconnect_req; |
| struct hbm_flow_control *flow_control; |
| struct hbm_props_response *props_res; |
| struct hbm_host_enum_response *enum_res; |
| |
| /* read the message to our buffer */ |
| BUG_ON(hdr->length >= sizeof(dev->rd_msg_buf)); |
| mei_read_slots(dev, dev->rd_msg_buf, hdr->length); |
| mei_msg = (struct mei_bus_message *)dev->rd_msg_buf; |
| |
| /* ignore spurious message and prevent reset nesting |
| * hbm is put to idle during system reset |
| */ |
| if (dev->hbm_state == MEI_HBM_IDLE) { |
| dev_dbg(&dev->pdev->dev, "hbm: state is idle ignore spurious messages\n"); |
| return 0; |
| } |
| |
| switch (mei_msg->hbm_cmd) { |
| case HOST_START_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: start: response message received.\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| version_res = (struct hbm_host_version_response *)mei_msg; |
| |
| dev_dbg(&dev->pdev->dev, "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\n", |
| HBM_MAJOR_VERSION, HBM_MINOR_VERSION, |
| version_res->me_max_version.major_version, |
| version_res->me_max_version.minor_version); |
| |
| if (version_res->host_version_supported) { |
| dev->version.major_version = HBM_MAJOR_VERSION; |
| dev->version.minor_version = HBM_MINOR_VERSION; |
| } else { |
| dev->version.major_version = |
| version_res->me_max_version.major_version; |
| dev->version.minor_version = |
| version_res->me_max_version.minor_version; |
| } |
| |
| if (!mei_hbm_version_is_supported(dev)) { |
| dev_warn(&dev->pdev->dev, "hbm: start: version mismatch - stopping the driver.\n"); |
| |
| dev->hbm_state = MEI_HBM_STOPPED; |
| if (mei_hbm_stop_req(dev)) { |
| dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n"); |
| return -EIO; |
| } |
| break; |
| } |
| |
| if (dev->dev_state != MEI_DEV_INIT_CLIENTS || |
| dev->hbm_state != MEI_HBM_START) { |
| dev_err(&dev->pdev->dev, "hbm: start: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| dev->hbm_state = MEI_HBM_STARTED; |
| |
| if (mei_hbm_enum_clients_req(dev)) { |
| dev_err(&dev->pdev->dev, "hbm: start: failed to send enumeration request\n"); |
| return -EIO; |
| } |
| |
| wake_up_interruptible(&dev->wait_recvd_msg); |
| break; |
| |
| case CLIENT_CONNECT_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: client connect response: message received.\n"); |
| |
| connect_res = (struct hbm_client_connect_response *) mei_msg; |
| mei_hbm_cl_connect_res(dev, connect_res); |
| wake_up(&dev->wait_recvd_msg); |
| break; |
| |
| case CLIENT_DISCONNECT_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: client disconnect response: message received.\n"); |
| |
| disconnect_res = (struct hbm_client_connect_response *) mei_msg; |
| mei_hbm_cl_disconnect_res(dev, disconnect_res); |
| wake_up(&dev->wait_recvd_msg); |
| break; |
| |
| case MEI_FLOW_CONTROL_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: client flow control response: message received.\n"); |
| |
| flow_control = (struct hbm_flow_control *) mei_msg; |
| mei_hbm_cl_flow_control_res(dev, flow_control); |
| break; |
| |
| case MEI_PG_ISOLATION_ENTRY_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "power gate isolation entry response received\n"); |
| dev->pg_event = MEI_PG_EVENT_RECEIVED; |
| if (waitqueue_active(&dev->wait_pg)) |
| wake_up(&dev->wait_pg); |
| break; |
| |
| case MEI_PG_ISOLATION_EXIT_REQ_CMD: |
| dev_dbg(&dev->pdev->dev, "power gate isolation exit request received\n"); |
| dev->pg_event = MEI_PG_EVENT_RECEIVED; |
| if (waitqueue_active(&dev->wait_pg)) |
| wake_up(&dev->wait_pg); |
| else |
| /* |
| * If the driver is not waiting on this then |
| * this is HW initiated exit from PG. |
| * Start runtime pm resume sequence to exit from PG. |
| */ |
| pm_request_resume(&dev->pdev->dev); |
| break; |
| |
| case HOST_CLIENT_PROPERTIES_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: properties response: message received.\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| if (dev->me_clients == NULL) { |
| dev_err(&dev->pdev->dev, "hbm: properties response: mei_clients not allocated\n"); |
| return -EPROTO; |
| } |
| |
| props_res = (struct hbm_props_response *)mei_msg; |
| me_client = &dev->me_clients[dev->me_client_presentation_num]; |
| |
| if (props_res->status) { |
| dev_err(&dev->pdev->dev, "hbm: properties response: wrong status = %d\n", |
| props_res->status); |
| return -EPROTO; |
| } |
| |
| if (me_client->client_id != props_res->address) { |
| dev_err(&dev->pdev->dev, "hbm: properties response: address mismatch %d ?= %d\n", |
| me_client->client_id, props_res->address); |
| return -EPROTO; |
| } |
| |
| if (dev->dev_state != MEI_DEV_INIT_CLIENTS || |
| dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) { |
| dev_err(&dev->pdev->dev, "hbm: properties response: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| me_client->props = props_res->client_properties; |
| dev->me_client_index++; |
| dev->me_client_presentation_num++; |
| |
| /* request property for the next client */ |
| if (mei_hbm_prop_req(dev)) |
| return -EIO; |
| |
| break; |
| |
| case HOST_ENUM_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: enumeration response: message received\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| enum_res = (struct hbm_host_enum_response *) mei_msg; |
| BUILD_BUG_ON(sizeof(dev->me_clients_map) |
| < sizeof(enum_res->valid_addresses)); |
| memcpy(dev->me_clients_map, enum_res->valid_addresses, |
| sizeof(enum_res->valid_addresses)); |
| |
| if (dev->dev_state != MEI_DEV_INIT_CLIENTS || |
| dev->hbm_state != MEI_HBM_ENUM_CLIENTS) { |
| dev_err(&dev->pdev->dev, "hbm: enumeration response: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| if (mei_hbm_me_cl_allocate(dev)) { |
| dev_err(&dev->pdev->dev, "hbm: enumeration response: cannot allocate clients array\n"); |
| return -ENOMEM; |
| } |
| |
| dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES; |
| |
| /* first property request */ |
| if (mei_hbm_prop_req(dev)) |
| return -EIO; |
| |
| break; |
| |
| case HOST_STOP_RES_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: stop response: message received\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| if (dev->hbm_state != MEI_HBM_STOPPED) { |
| dev_err(&dev->pdev->dev, "hbm: stop response: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| dev->dev_state = MEI_DEV_POWER_DOWN; |
| dev_info(&dev->pdev->dev, "hbm: stop response: resetting.\n"); |
| /* force the reset */ |
| return -EPROTO; |
| break; |
| |
| case CLIENT_DISCONNECT_REQ_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: disconnect request: message received\n"); |
| |
| disconnect_req = (struct hbm_client_connect_request *)mei_msg; |
| mei_hbm_fw_disconnect_req(dev, disconnect_req); |
| break; |
| |
| case ME_STOP_REQ_CMD: |
| dev_dbg(&dev->pdev->dev, "hbm: stop request: message received\n"); |
| dev->hbm_state = MEI_HBM_STOPPED; |
| if (mei_hbm_stop_req(dev)) { |
| dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n"); |
| return -EIO; |
| } |
| break; |
| default: |
| BUG(); |
| break; |
| |
| } |
| return 0; |
| } |
| |