| /* |
| * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III |
| * |
| * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. |
| * |
| * see flexcop.c for copyright information. |
| */ |
| #include "flexcop.h" |
| |
| #include "stv0299.h" |
| #include "mt352.h" |
| #include "nxt200x.h" |
| #include "bcm3510.h" |
| #include "stv0297.h" |
| #include "mt312.h" |
| #include "lgdt330x.h" |
| #include "lg_h06xf.h" |
| #include "dvb-pll.h" |
| |
| /* lnb control */ |
| |
| static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| flexcop_ibi_value v; |
| deb_tuner("polarity/voltage = %u\n", voltage); |
| |
| v = fc->read_ibi_reg(fc, misc_204); |
| switch (voltage) { |
| case SEC_VOLTAGE_OFF: |
| v.misc_204.ACPI1_sig = 1; |
| break; |
| case SEC_VOLTAGE_13: |
| v.misc_204.ACPI1_sig = 0; |
| v.misc_204.LNB_L_H_sig = 0; |
| break; |
| case SEC_VOLTAGE_18: |
| v.misc_204.ACPI1_sig = 0; |
| v.misc_204.LNB_L_H_sig = 1; |
| break; |
| default: |
| err("unknown SEC_VOLTAGE value"); |
| return -EINVAL; |
| } |
| return fc->write_ibi_reg(fc, misc_204, v); |
| } |
| |
| static int flexcop_sleep(struct dvb_frontend* fe) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ |
| |
| if (fc->fe_sleep) |
| return fc->fe_sleep(fe); |
| |
| /* v.misc_204.ACPI3_sig = 1; |
| fc->write_ibi_reg(fc,misc_204,v);*/ |
| |
| return 0; |
| } |
| |
| static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) |
| { |
| /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ |
| struct flexcop_device *fc = fe->dvb->priv; |
| flexcop_ibi_value v; |
| u16 ax; |
| v.raw = 0; |
| |
| deb_tuner("tone = %u\n",tone); |
| |
| switch (tone) { |
| case SEC_TONE_ON: |
| ax = 0x01ff; |
| break; |
| case SEC_TONE_OFF: |
| ax = 0; |
| break; |
| default: |
| err("unknown SEC_TONE value"); |
| return -EINVAL; |
| } |
| |
| v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ |
| |
| v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; |
| v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; |
| |
| return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); |
| } |
| |
| static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) |
| { |
| flexcop_set_tone(fe, SEC_TONE_ON); |
| udelay(data ? 500 : 1000); |
| flexcop_set_tone(fe, SEC_TONE_OFF); |
| udelay(data ? 1000 : 500); |
| } |
| |
| static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) |
| { |
| int i, par = 1, d; |
| |
| for (i = 7; i >= 0; i--) { |
| d = (data >> i) & 1; |
| par ^= d; |
| flexcop_diseqc_send_bit(fe, d); |
| } |
| |
| flexcop_diseqc_send_bit(fe, par); |
| } |
| |
| static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) |
| { |
| int i; |
| |
| flexcop_set_tone(fe, SEC_TONE_OFF); |
| mdelay(16); |
| |
| for (i = 0; i < len; i++) |
| flexcop_diseqc_send_byte(fe,msg[i]); |
| |
| mdelay(16); |
| |
| if (burst != -1) { |
| if (burst) |
| flexcop_diseqc_send_byte(fe, 0xff); |
| else { |
| flexcop_set_tone(fe, SEC_TONE_ON); |
| udelay(12500); |
| flexcop_set_tone(fe, SEC_TONE_OFF); |
| } |
| msleep(20); |
| } |
| return 0; |
| } |
| |
| static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) |
| { |
| return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); |
| } |
| |
| static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) |
| { |
| return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); |
| } |
| |
| /* dvb-s stv0299 */ |
| static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) |
| { |
| u8 aclk = 0; |
| u8 bclk = 0; |
| |
| if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } |
| else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } |
| else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } |
| else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } |
| else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } |
| else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } |
| |
| stv0299_writereg (fe, 0x13, aclk); |
| stv0299_writereg (fe, 0x14, bclk); |
| stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); |
| stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); |
| stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); |
| |
| return 0; |
| } |
| |
| static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) |
| { |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; |
| struct flexcop_device *fc = fe->dvb->priv; |
| |
| div = params->frequency / 125; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = div & 0xff; |
| buf[2] = 0x84; /* 0xC4 */ |
| buf[3] = 0x08; |
| |
| if (params->frequency < 1500000) buf[3] |= 0x10; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) { |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static u8 samsung_tbmu24112_inittab[] = { |
| 0x01, 0x15, |
| 0x02, 0x30, |
| 0x03, 0x00, |
| 0x04, 0x7D, |
| 0x05, 0x35, |
| 0x06, 0x02, |
| 0x07, 0x00, |
| 0x08, 0xC3, |
| 0x0C, 0x00, |
| 0x0D, 0x81, |
| 0x0E, 0x23, |
| 0x0F, 0x12, |
| 0x10, 0x7E, |
| 0x11, 0x84, |
| 0x12, 0xB9, |
| 0x13, 0x88, |
| 0x14, 0x89, |
| 0x15, 0xC9, |
| 0x16, 0x00, |
| 0x17, 0x5C, |
| 0x18, 0x00, |
| 0x19, 0x00, |
| 0x1A, 0x00, |
| 0x1C, 0x00, |
| 0x1D, 0x00, |
| 0x1E, 0x00, |
| 0x1F, 0x3A, |
| 0x20, 0x2E, |
| 0x21, 0x80, |
| 0x22, 0xFF, |
| 0x23, 0xC1, |
| 0x28, 0x00, |
| 0x29, 0x1E, |
| 0x2A, 0x14, |
| 0x2B, 0x0F, |
| 0x2C, 0x09, |
| 0x2D, 0x05, |
| 0x31, 0x1F, |
| 0x32, 0x19, |
| 0x33, 0xFE, |
| 0x34, 0x93, |
| 0xff, 0xff, |
| }; |
| |
| static struct stv0299_config samsung_tbmu24112_config = { |
| .demod_address = 0x68, |
| .inittab = samsung_tbmu24112_inittab, |
| .mclk = 88000000UL, |
| .invert = 0, |
| .skip_reinit = 0, |
| .lock_output = STV0229_LOCKOUTPUT_LK, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, |
| }; |
| |
| /* dvb-t mt352 */ |
| static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) |
| { |
| static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; |
| static u8 mt352_reset [] = { 0x50, 0x80 }; |
| static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; |
| static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; |
| static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; |
| |
| mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); |
| udelay(2000); |
| mt352_write(fe, mt352_reset, sizeof(mt352_reset)); |
| mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); |
| |
| mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); |
| mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) |
| { |
| u32 div; |
| unsigned char bs = 0; |
| |
| if (buf_len < 5) |
| return -EINVAL; |
| |
| #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ |
| div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; |
| |
| if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; |
| if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; |
| if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; |
| |
| pllbuf[0] = 0x61; |
| pllbuf[1] = div >> 8; |
| pllbuf[2] = div & 0xff; |
| pllbuf[3] = 0xcc; |
| pllbuf[4] = bs; |
| |
| return 5; |
| } |
| |
| static struct mt352_config samsung_tdtc9251dh0_config = { |
| .demod_address = 0x0f, |
| .demod_init = samsung_tdtc9251dh0_demod_init, |
| }; |
| |
| static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| return request_firmware(fw, name, fc->dev); |
| } |
| |
| static int lgdt3303_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| return lg_h06xf_pll_set(fe, &fc->i2c_adap, params); |
| } |
| |
| static struct lgdt330x_config air2pc_atsc_hd5000_config = { |
| .demod_address = 0x59, |
| .demod_chip = LGDT3303, |
| .serial_mpeg = 0x04, |
| .clock_polarity_flip = 1, |
| }; |
| |
| static struct nxt200x_config samsung_tbmv_config = { |
| .demod_address = 0x0a, |
| }; |
| |
| static struct bcm3510_config air2pc_atsc_first_gen_config = { |
| .demod_address = 0x0f, |
| .request_firmware = flexcop_fe_request_firmware, |
| }; |
| |
| static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) |
| { |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; |
| struct flexcop_device *fc = fe->dvb->priv; |
| |
| div = (params->frequency + (125/2)) / 125; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = (div >> 0) & 0xff; |
| buf[2] = 0x84 | ((div >> 10) & 0x60); |
| buf[3] = 0x80; |
| |
| if (params->frequency < 1550000) |
| buf[3] |= 0x02; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| return 0; |
| } |
| |
| static struct mt312_config skystar23_samsung_tbdu18132_config = { |
| |
| .demod_address = 0x0e, |
| }; |
| |
| static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| u8 buf[4]; |
| u16 div; |
| int ret; |
| |
| /* 62.5 kHz * 10 */ |
| #define REF_FREQ 625 |
| #define FREQ_OFFSET 36125 |
| |
| div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz |
| |
| buf[0] = (u8)( div >> 8) & 0x7f; |
| buf[1] = (u8) div & 0xff; |
| |
| /* F(osc) = N * Reference Freq. (62.5 kHz) |
| * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8 |
| * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0 |
| * byte 4 : 1 * * AGD R3 R2 R1 R0 |
| * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1 |
| * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */ |
| buf[2] = 0x95; |
| |
| // Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 |
| // 47 - 153 0 * 0 0 0 0 0 1 0x01 |
| // 153 - 430 0 * 0 0 0 0 1 0 0x02 |
| // 430 - 822 0 * 0 0 1 0 0 0 0x08 |
| // 822 - 862 1 * 0 0 1 0 0 0 0x88 |
| |
| if (fep->frequency <= 153000000) buf[3] = 0x01; |
| else if (fep->frequency <= 430000000) buf[3] = 0x02; |
| else if (fep->frequency <= 822000000) buf[3] = 0x08; |
| else buf[3] = 0x88; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]); |
| ret = fc->i2c_request(fc,FC_WRITE,FC_I2C_PORT_TUNER,0x61,buf[0],&buf[1],3); |
| deb_tuner("tuner write returned: %d\n",ret); |
| |
| return 0; |
| } |
| |
| static u8 alps_tdee4_stv0297_inittab[] = { |
| 0x80, 0x01, |
| 0x80, 0x00, |
| 0x81, 0x01, |
| 0x81, 0x00, |
| 0x00, 0x09, |
| 0x01, 0x69, |
| 0x03, 0x00, |
| 0x04, 0x00, |
| 0x07, 0x00, |
| 0x08, 0x00, |
| 0x20, 0x00, |
| 0x21, 0x40, |
| 0x22, 0x00, |
| 0x23, 0x00, |
| 0x24, 0x40, |
| 0x25, 0x88, |
| 0x30, 0xff, |
| 0x31, 0x00, |
| 0x32, 0xff, |
| 0x33, 0x00, |
| 0x34, 0x50, |
| 0x35, 0x7f, |
| 0x36, 0x00, |
| 0x37, 0x20, |
| 0x38, 0x00, |
| 0x40, 0x1c, |
| 0x41, 0xff, |
| 0x42, 0x29, |
| 0x43, 0x00, |
| 0x44, 0xff, |
| 0x45, 0x00, |
| 0x46, 0x00, |
| 0x49, 0x04, |
| 0x4a, 0x00, |
| 0x4b, 0xf8, |
| 0x52, 0x30, |
| 0x55, 0xae, |
| 0x56, 0x47, |
| 0x57, 0xe1, |
| 0x58, 0x3a, |
| 0x5a, 0x1e, |
| 0x5b, 0x34, |
| 0x60, 0x00, |
| 0x63, 0x00, |
| 0x64, 0x00, |
| 0x65, 0x00, |
| 0x66, 0x00, |
| 0x67, 0x00, |
| 0x68, 0x00, |
| 0x69, 0x00, |
| 0x6a, 0x02, |
| 0x6b, 0x00, |
| 0x70, 0xff, |
| 0x71, 0x00, |
| 0x72, 0x00, |
| 0x73, 0x00, |
| 0x74, 0x0c, |
| 0x80, 0x00, |
| 0x81, 0x00, |
| 0x82, 0x00, |
| 0x83, 0x00, |
| 0x84, 0x04, |
| 0x85, 0x80, |
| 0x86, 0x24, |
| 0x87, 0x78, |
| 0x88, 0x10, |
| 0x89, 0x00, |
| 0x90, 0x01, |
| 0x91, 0x01, |
| 0xa0, 0x04, |
| 0xa1, 0x00, |
| 0xa2, 0x00, |
| 0xb0, 0x91, |
| 0xb1, 0x0b, |
| 0xc0, 0x53, |
| 0xc1, 0x70, |
| 0xc2, 0x12, |
| 0xd0, 0x00, |
| 0xd1, 0x00, |
| 0xd2, 0x00, |
| 0xd3, 0x00, |
| 0xd4, 0x00, |
| 0xd5, 0x00, |
| 0xde, 0x00, |
| 0xdf, 0x00, |
| 0x61, 0x49, |
| 0x62, 0x0b, |
| 0x53, 0x08, |
| 0x59, 0x08, |
| 0xff, 0xff, |
| }; |
| |
| static struct stv0297_config alps_tdee4_stv0297_config = { |
| .demod_address = 0x1c, |
| .inittab = alps_tdee4_stv0297_inittab, |
| // .invert = 1, |
| // .pll_set = alps_tdee4_stv0297_pll_set, |
| }; |
| |
| /* try to figure out the frontend, each card/box can have on of the following list */ |
| int flexcop_frontend_init(struct flexcop_device *fc) |
| { |
| struct dvb_frontend_ops *ops; |
| |
| /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ |
| if ((fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { |
| ops = &fc->fe->ops; |
| |
| ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; |
| |
| ops->set_voltage = flexcop_set_voltage; |
| |
| fc->fe_sleep = ops->sleep; |
| ops->sleep = flexcop_sleep; |
| |
| fc->dev_type = FC_SKY; |
| info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); |
| } else |
| /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ |
| if ((fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { |
| fc->dev_type = FC_AIR_DVB; |
| fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; |
| info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); |
| } else |
| /* try the air atsc 2nd generation (nxt2002) */ |
| if ((fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, &fc->i2c_adap)) != NULL) { |
| fc->dev_type = FC_AIR_ATSC2; |
| dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, &dvb_pll_samsung_tbmv); |
| info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); |
| } else |
| /* try the air atsc 3nd generation (lgdt3303) */ |
| if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) { |
| fc->dev_type = FC_AIR_ATSC3; |
| fc->fe->ops.tuner_ops.set_params = lgdt3303_tuner_set_params; |
| info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address); |
| } else |
| /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ |
| if ((fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { |
| fc->dev_type = FC_AIR_ATSC1; |
| info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); |
| } else |
| /* try the cable dvb (stv0297) */ |
| if ((fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) { |
| fc->dev_type = FC_CABLE; |
| fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; |
| info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); |
| } else |
| /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ |
| if ((fc->fe = dvb_attach(vp310_mt312_attach, &skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { |
| ops = &fc->fe->ops; |
| |
| ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params; |
| |
| ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; |
| ops->diseqc_send_burst = flexcop_diseqc_send_burst; |
| ops->set_tone = flexcop_set_tone; |
| ops->set_voltage = flexcop_set_voltage; |
| |
| fc->fe_sleep = ops->sleep; |
| ops->sleep = flexcop_sleep; |
| |
| fc->dev_type = FC_SKY_OLD; |
| info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); |
| } |
| |
| if (fc->fe == NULL) { |
| err("no frontend driver found for this B2C2/FlexCop adapter"); |
| return -ENODEV; |
| } else { |
| if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { |
| err("frontend registration failed!"); |
| dvb_frontend_detach(fc->fe); |
| fc->fe = NULL; |
| return -EINVAL; |
| } |
| } |
| fc->init_state |= FC_STATE_FE_INIT; |
| return 0; |
| } |
| |
| void flexcop_frontend_exit(struct flexcop_device *fc) |
| { |
| if (fc->init_state & FC_STATE_FE_INIT) { |
| dvb_unregister_frontend(fc->fe); |
| dvb_frontend_detach(fc->fe); |
| } |
| |
| fc->init_state &= ~FC_STATE_FE_INIT; |
| } |