drivers/media/pci/cx18/cx18-vbi.c - arm/linux-arm64-legacy - Git at Google

 /*
  *  cx18 Vertical Blank Interval support functions
  *
  *  Derived from ivtv-vbi.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  *  02111-1307  USA
  */

 #include "cx18-driver.h"
 #include "cx18-vbi.h"
 #include "cx18-ioctl.h"
 #include "cx18-queue.h"

 /*
  * Raster Reference/Protection (RP) bytes, used in Start/End Active
  * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start
  * of VBI sample or VBI ancillary data regions in the digitial ratser line.
  *
  * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0
  */
 static const u8 raw_vbi_sav_rp[2] = { 0x20, 0x60 };    /* __V_, _FV_ */
 static const u8 sliced_vbi_eav_rp[2] = { 0xb0, 0xf0 }; /* T_VH, TFVH */

 static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp)
 {
 	int line = 0;
 	int i;
 	u32 linemask[2] = { 0, 0 };
 	unsigned short size;
 	static const u8 mpeg_hdr_data[] = {
 		/* MPEG-2 Program Pack */
 		0x00, 0x00, 0x01, 0xba,		    /* Prog Pack start code */
 		0x44, 0x00, 0x0c, 0x66, 0x24, 0x01, /* SCR, SCR Ext, markers */
 		0x01, 0xd1, 0xd3,		    /* Mux Rate, markers */
 		0xfa, 0xff, 0xff,		    /* Res, Suff cnt, Stuff */
 		/* MPEG-2 Private Stream 1 PES Packet */
 		0x00, 0x00, 0x01, 0xbd,		    /* Priv Stream 1 start */
 		0x00, 0x1a,			    /* length */
 		0x84, 0x80, 0x07,		    /* flags, hdr data len */
 		0x21, 0x00, 0x5d, 0x63, 0xa7, 	    /* PTS, markers */
 		0xff, 0xff			    /* stuffing */
 	};
 	const int sd = sizeof(mpeg_hdr_data);	/* start of vbi data */
 	int idx = cx->vbi.frame % CX18_VBI_FRAMES;
 	u8 *dst = &cx->vbi.sliced_mpeg_data[idx][0];

 	for (i = 0; i < lines; i++) {
 		struct v4l2_sliced_vbi_data *sdata = cx->vbi.sliced_data + i;
 		int f, l;

 		if (sdata->id == 0)
 			continue;

 		l = sdata->line - 6;
 		f = sdata->field;
 		if (f)
 			l += 18;
 		if (l < 32)
 			linemask[0] |= (1 << l);
 		else
 			linemask[1] |= (1 << (l - 32));
 		dst[sd + 12 + line * 43] = cx18_service2vbi(sdata->id);
 		memcpy(dst + sd + 12 + line * 43 + 1, sdata->data, 42);
 		line++;
 	}
 	memcpy(dst, mpeg_hdr_data, sizeof(mpeg_hdr_data));
 	if (line == 36) {
 		/* All lines are used, so there is no space for the linemask
 		   (the max size of the VBI data is 36 * 43 + 4 bytes).
 		   So in this case we use the magic number 'ITV0'. */
 		memcpy(dst + sd, "ITV0", 4);
 		memmove(dst + sd + 4, dst + sd + 12, line * 43);
 		size = 4 + ((43 * line + 3) & ~3);
 	} else {
 		memcpy(dst + sd, "itv0", 4);
 		cpu_to_le32s(&linemask[0]);
 		cpu_to_le32s(&linemask[1]);
 		memcpy(dst + sd + 4, &linemask[0], 8);
 		size = 12 + ((43 * line + 3) & ~3);
 	}
 	dst[4+16] = (size + 10) >> 8;
 	dst[5+16] = (size + 10) & 0xff;
 	dst[9+16] = 0x21 | ((pts_stamp >> 29) & 0x6);
 	dst[10+16] = (pts_stamp >> 22) & 0xff;
 	dst[11+16] = 1 | ((pts_stamp >> 14) & 0xff);
 	dst[12+16] = (pts_stamp >> 7) & 0xff;
 	dst[13+16] = 1 | ((pts_stamp & 0x7f) << 1);
 	cx->vbi.sliced_mpeg_size[idx] = sd + size;
 }

 /* Compress raw VBI format, removes leading SAV codes and surplus space
    after the frame.  Returns new compressed size. */
 /* FIXME - this function ignores the input size. */
 static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size, u32 hdr_size)
 {
 	u32 line_size = vbi_active_samples;
 	u32 lines = cx->vbi.count * 2;
 	u8 *q = buf;
 	u8 *p;
 	int i;

 	/* Skip the header */
 	buf += hdr_size;

 	for (i = 0; i < lines; i++) {
 		p = buf + i * line_size;

 		/* Look for SAV code */
 		if (p[0] != 0xff || p[1] || p[2] ||
 		    (p[3] != raw_vbi_sav_rp[0] &&
 		     p[3] != raw_vbi_sav_rp[1]))
 			break;
 		if (i == lines - 1) {
 			/* last line is hdr_size bytes short - extrapolate it */
 			memcpy(q, p + 4, line_size - 4 - hdr_size);
 			q += line_size - 4 - hdr_size;
 			p += line_size - hdr_size - 1;
 			memset(q, (int) *p, hdr_size);
 		} else {
 			memcpy(q, p + 4, line_size - 4);
 			q += line_size - 4;
 		}
 	}
 	return lines * (line_size - 4);
 }

 static u32 compress_sliced_buf(struct cx18 *cx, u8 *buf, u32 size,
 			       const u32 hdr_size)
 {
 	struct v4l2_decode_vbi_line vbi;
 	int i;
 	u32 line = 0;
 	u32 line_size = cx->is_60hz ? vbi_hblank_samples_60Hz
 				    : vbi_hblank_samples_50Hz;

 	/* find the first valid line */
 	for (i = hdr_size, buf += hdr_size; i < size; i++, buf++) {
 		if (buf[0] == 0xff && !buf[1] && !buf[2] &&
 		    (buf[3] == sliced_vbi_eav_rp[0] ||
 		     buf[3] == sliced_vbi_eav_rp[1]))
 			break;
 	}

 	/*
 	 * The last line is short by hdr_size bytes, but for the remaining
 	 * checks against size, we pretend that it is not, by counting the
 	 * header bytes we knowingly skipped
 	 */
 	size -= (i - hdr_size);
 	if (size < line_size)
 		return line;

 	for (i = 0; i < size / line_size; i++) {
 		u8 *p = buf + i * line_size;

 		/* Look for EAV code  */
 		if (p[0] != 0xff || p[1] || p[2] ||
 		    (p[3] != sliced_vbi_eav_rp[0] &&
 		     p[3] != sliced_vbi_eav_rp[1]))
 			continue;
 		vbi.p = p + 4;
 		v4l2_subdev_call(cx->sd_av, vbi, decode_vbi_line, &vbi);
 		if (vbi.type) {
 			cx->vbi.sliced_data[line].id = vbi.type;
 			cx->vbi.sliced_data[line].field = vbi.is_second_field;
 			cx->vbi.sliced_data[line].line = vbi.line;
 			memcpy(cx->vbi.sliced_data[line].data, vbi.p, 42);
 			line++;
 		}
 	}
 	return line;
 }

 static void _cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf)
 {
 	/*
 	 * The CX23418 provides a 12 byte header in its raw VBI buffers to us:
 	 * 0x3fffffff [4 bytes of something] [4 byte presentation time stamp]
 	 */
 	struct vbi_data_hdr {
 		__be32 magic;
 		__be32 unknown;
 		__be32 pts;
 	} *hdr = (struct vbi_data_hdr *) buf->buf;

 	u8 *p = (u8 *) buf->buf;
 	u32 size = buf->bytesused;
 	u32 pts;
 	int lines;

 	/*
 	 * The CX23418 sends us data that is 32 bit little-endian swapped,
 	 * but we want the raw VBI bytes in the order they were in the raster
 	 * line.  This has a side effect of making the header big endian
 	 */
 	cx18_buf_swap(buf);

 	/* Raw VBI data */
 	if (cx18_raw_vbi(cx)) {

 		size = buf->bytesused =
 		     compress_raw_buf(cx, p, size, sizeof(struct vbi_data_hdr));

 		/*
 		 * Hack needed for compatibility with old VBI software.
 		 * Write the frame # at the last 4 bytes of the frame
 		 */
 		p += size - 4;
 		memcpy(p, &cx->vbi.frame, 4);
 		cx->vbi.frame++;
 		return;
 	}

 	/* Sliced VBI data with data insertion */

 	pts = (be32_to_cpu(hdr->magic) == 0x3fffffff) ? be32_to_cpu(hdr->pts)
 						      : 0;

 	lines = compress_sliced_buf(cx, p, size, sizeof(struct vbi_data_hdr));

 	/* always return at least one empty line */
 	if (lines == 0) {
 		cx->vbi.sliced_data[0].id = 0;
 		cx->vbi.sliced_data[0].line = 0;
 		cx->vbi.sliced_data[0].field = 0;
 		lines = 1;
 	}
 	buf->bytesused = size = lines * sizeof(cx->vbi.sliced_data[0]);
 	memcpy(p, &cx->vbi.sliced_data[0], size);

 	if (cx->vbi.insert_mpeg)
 		copy_vbi_data(cx, lines, pts);
 	cx->vbi.frame++;
 }

 void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl,
 			   int streamtype)
 {
 	struct cx18_buffer *buf;
 	u32 orig_used;

 	if (streamtype != CX18_ENC_STREAM_TYPE_VBI)
 		return;

 	/*
 	 * Big assumption here:
 	 * Every buffer hooked to the MDL's buf_list is a complete VBI frame
 	 * that ends at the end of the buffer.
 	 *
 	 * To assume anything else would make the code in this file
 	 * more complex, or require extra memcpy()'s to make the
 	 * buffers satisfy the above assumption.  It's just simpler to set
 	 * up the encoder buffer transfers to make the assumption true.
 	 */
 	list_for_each_entry(buf, &mdl->buf_list, list) {
 		orig_used = buf->bytesused;
 		if (orig_used == 0)
 			break;
 		_cx18_process_vbi_data(cx, buf);
 		mdl->bytesused -= (orig_used - buf->bytesused);
 	}
 }
	/*
	* cx18 Vertical Blank Interval support functions
	*
	* Derived from ivtv-vbi.c
	*
	* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
	* 02111-1307 USA
	*/

	#include "cx18-driver.h"
	#include "cx18-vbi.h"
	#include "cx18-ioctl.h"
	#include "cx18-queue.h"

	/*
	* Raster Reference/Protection (RP) bytes, used in Start/End Active
	* Video codes emitted from the digitzer in VIP 1.x mode, that flag the start
	* of VBI sample or VBI ancillary data regions in the digitial ratser line.
	*
	* Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0
	*/
	static const u8 raw_vbi_sav_rp[2] = { 0x20, 0x60 }; /* __V_, _FV_ */
	static const u8 sliced_vbi_eav_rp[2] = { 0xb0, 0xf0 }; /* T_VH, TFVH */

	static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp)
	{
	int line = 0;
	int i;
	u32 linemask[2] = { 0, 0 };
	unsigned short size;
	static const u8 mpeg_hdr_data[] = {
	/* MPEG-2 Program Pack */
	0x00, 0x00, 0x01, 0xba, /* Prog Pack start code */
	0x44, 0x00, 0x0c, 0x66, 0x24, 0x01, /* SCR, SCR Ext, markers */
	0x01, 0xd1, 0xd3, /* Mux Rate, markers */
	0xfa, 0xff, 0xff, /* Res, Suff cnt, Stuff */
	/* MPEG-2 Private Stream 1 PES Packet */
	0x00, 0x00, 0x01, 0xbd, /* Priv Stream 1 start */
	0x00, 0x1a, /* length */
	0x84, 0x80, 0x07, /* flags, hdr data len */
	0x21, 0x00, 0x5d, 0x63, 0xa7, /* PTS, markers */
	0xff, 0xff /* stuffing */
	};
	const int sd = sizeof(mpeg_hdr_data); /* start of vbi data */
	int idx = cx->vbi.frame % CX18_VBI_FRAMES;
	u8 *dst = &cx->vbi.sliced_mpeg_data[idx][0];

	for (i = 0; i < lines; i++) {
	struct v4l2_sliced_vbi_data *sdata = cx->vbi.sliced_data + i;
	int f, l;

	if (sdata->id == 0)
	continue;

	l = sdata->line - 6;
	f = sdata->field;
	if (f)
	l += 18;
	if (l < 32)
	linemask[0] \|= (1 << l);
	else
	linemask[1] \|= (1 << (l - 32));
	dst[sd + 12 + line * 43] = cx18_service2vbi(sdata->id);
	memcpy(dst + sd + 12 + line * 43 + 1, sdata->data, 42);
	line++;
	}
	memcpy(dst, mpeg_hdr_data, sizeof(mpeg_hdr_data));
	if (line == 36) {
	/* All lines are used, so there is no space for the linemask
	(the max size of the VBI data is 36 * 43 + 4 bytes).
	So in this case we use the magic number 'ITV0'. */
	memcpy(dst + sd, "ITV0", 4);
	memmove(dst + sd + 4, dst + sd + 12, line * 43);
	size = 4 + ((43 * line + 3) & ~3);
	} else {
	memcpy(dst + sd, "itv0", 4);
	cpu_to_le32s(&linemask[0]);
	cpu_to_le32s(&linemask[1]);
	memcpy(dst + sd + 4, &linemask[0], 8);
	size = 12 + ((43 * line + 3) & ~3);
	}
	dst[4+16] = (size + 10) >> 8;
	dst[5+16] = (size + 10) & 0xff;
	dst[9+16] = 0x21 \| ((pts_stamp >> 29) & 0x6);
	dst[10+16] = (pts_stamp >> 22) & 0xff;
	dst[11+16] = 1 \| ((pts_stamp >> 14) & 0xff);
	dst[12+16] = (pts_stamp >> 7) & 0xff;
	dst[13+16] = 1 \| ((pts_stamp & 0x7f) << 1);
	cx->vbi.sliced_mpeg_size[idx] = sd + size;
	}

	/* Compress raw VBI format, removes leading SAV codes and surplus space
	after the frame. Returns new compressed size. */
	/* FIXME - this function ignores the input size. */
	static u32 compress_raw_buf(struct cx18 cx, u8 buf, u32 size, u32 hdr_size)
	{
	u32 line_size = vbi_active_samples;
	u32 lines = cx->vbi.count * 2;
	u8 *q = buf;
	u8 *p;
	int i;

	/* Skip the header */
	buf += hdr_size;

	for (i = 0; i < lines; i++) {
	p = buf + i * line_size;

	/* Look for SAV code */
	if (p[0] != 0xff \|\| p[1] \|\| p[2] \|\|
	(p[3] != raw_vbi_sav_rp[0] &&
	p[3] != raw_vbi_sav_rp[1]))
	break;
	if (i == lines - 1) {
	/* last line is hdr_size bytes short - extrapolate it */
	memcpy(q, p + 4, line_size - 4 - hdr_size);
	q += line_size - 4 - hdr_size;
	p += line_size - hdr_size - 1;
	memset(q, (int) *p, hdr_size);
	} else {
	memcpy(q, p + 4, line_size - 4);
	q += line_size - 4;
	}
	}
	return lines * (line_size - 4);
	}

	static u32 compress_sliced_buf(struct cx18 cx, u8 buf, u32 size,
	const u32 hdr_size)
	{
	struct v4l2_decode_vbi_line vbi;
	int i;
	u32 line = 0;
	u32 line_size = cx->is_60hz ? vbi_hblank_samples_60Hz
	: vbi_hblank_samples_50Hz;

	/* find the first valid line */
	for (i = hdr_size, buf += hdr_size; i < size; i++, buf++) {
	if (buf[0] == 0xff && !buf[1] && !buf[2] &&
	(buf[3] == sliced_vbi_eav_rp[0] \|\|
	buf[3] == sliced_vbi_eav_rp[1]))
	break;
	}

	/*
	* The last line is short by hdr_size bytes, but for the remaining
	* checks against size, we pretend that it is not, by counting the
	* header bytes we knowingly skipped
	*/
	size -= (i - hdr_size);
	if (size < line_size)
	return line;

	for (i = 0; i < size / line_size; i++) {
	u8 p = buf + i line_size;

	/* Look for EAV code */
	if (p[0] != 0xff \|\| p[1] \|\| p[2] \|\|
	(p[3] != sliced_vbi_eav_rp[0] &&
	p[3] != sliced_vbi_eav_rp[1]))
	continue;
	vbi.p = p + 4;
	v4l2_subdev_call(cx->sd_av, vbi, decode_vbi_line, &vbi);
	if (vbi.type) {
	cx->vbi.sliced_data[line].id = vbi.type;
	cx->vbi.sliced_data[line].field = vbi.is_second_field;
	cx->vbi.sliced_data[line].line = vbi.line;
	memcpy(cx->vbi.sliced_data[line].data, vbi.p, 42);
	line++;
	}
	}
	return line;
	}

	static void _cx18_process_vbi_data(struct cx18 cx, struct cx18_buffer buf)
	{
	/*
	* The CX23418 provides a 12 byte header in its raw VBI buffers to us:
	* 0x3fffffff [4 bytes of something] [4 byte presentation time stamp]
	*/
	struct vbi_data_hdr {
	__be32 magic;
	__be32 unknown;
	__be32 pts;
	} hdr = (struct vbi_data_hdr ) buf->buf;

	u8 p = (u8 ) buf->buf;
	u32 size = buf->bytesused;
	u32 pts;
	int lines;

	/*
	* The CX23418 sends us data that is 32 bit little-endian swapped,
	* but we want the raw VBI bytes in the order they were in the raster
	* line. This has a side effect of making the header big endian
	*/
	cx18_buf_swap(buf);

	/* Raw VBI data */
	if (cx18_raw_vbi(cx)) {

	size = buf->bytesused =
	compress_raw_buf(cx, p, size, sizeof(struct vbi_data_hdr));

	/*
	* Hack needed for compatibility with old VBI software.
	* Write the frame # at the last 4 bytes of the frame
	*/
	p += size - 4;
	memcpy(p, &cx->vbi.frame, 4);
	cx->vbi.frame++;
	return;
	}

	/* Sliced VBI data with data insertion */

	pts = (be32_to_cpu(hdr->magic) == 0x3fffffff) ? be32_to_cpu(hdr->pts)
	: 0;

	lines = compress_sliced_buf(cx, p, size, sizeof(struct vbi_data_hdr));

	/* always return at least one empty line */
	if (lines == 0) {
	cx->vbi.sliced_data[0].id = 0;
	cx->vbi.sliced_data[0].line = 0;
	cx->vbi.sliced_data[0].field = 0;
	lines = 1;
	}
	buf->bytesused = size = lines * sizeof(cx->vbi.sliced_data[0]);
	memcpy(p, &cx->vbi.sliced_data[0], size);

	if (cx->vbi.insert_mpeg)
	copy_vbi_data(cx, lines, pts);
	cx->vbi.frame++;
	}

	void cx18_process_vbi_data(struct cx18 cx, struct cx18_mdl mdl,
	int streamtype)
	{
	struct cx18_buffer *buf;
	u32 orig_used;

	if (streamtype != CX18_ENC_STREAM_TYPE_VBI)
	return;

	/*
	* Big assumption here:
	* Every buffer hooked to the MDL's buf_list is a complete VBI frame
	* that ends at the end of the buffer.
	*
	* To assume anything else would make the code in this file
	* more complex, or require extra memcpy()'s to make the
	* buffers satisfy the above assumption. It's just simpler to set
	* up the encoder buffer transfers to make the assumption true.
	*/
	list_for_each_entry(buf, &mdl->buf_list, list) {
	orig_used = buf->bytesused;
	if (orig_used == 0)
	break;
	_cx18_process_vbi_data(cx, buf);
	mdl->bytesused -= (orig_used - buf->bytesused);
	}
	}