| /* |
| * AD714X CapTouch Programmable Controller driver (I2C bus) |
| * |
| * Copyright 2009-2011 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/input.h> /* BUS_I2C */ |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/pm.h> |
| #include "ad714x.h" |
| |
| #ifdef CONFIG_PM |
| static int ad714x_i2c_suspend(struct device *dev) |
| { |
| return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev))); |
| } |
| |
| static int ad714x_i2c_resume(struct device *dev) |
| { |
| return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev))); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume); |
| |
| static int ad714x_i2c_write(struct ad714x_chip *chip, |
| unsigned short reg, unsigned short data) |
| { |
| struct i2c_client *client = to_i2c_client(chip->dev); |
| int error; |
| |
| chip->xfer_buf[0] = cpu_to_be16(reg); |
| chip->xfer_buf[1] = cpu_to_be16(data); |
| |
| error = i2c_master_send(client, (u8 *)chip->xfer_buf, |
| 2 * sizeof(*chip->xfer_buf)); |
| if (unlikely(error < 0)) { |
| dev_err(&client->dev, "I2C write error: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ad714x_i2c_read(struct ad714x_chip *chip, |
| unsigned short reg, unsigned short *data, size_t len) |
| { |
| struct i2c_client *client = to_i2c_client(chip->dev); |
| int i; |
| int error; |
| |
| chip->xfer_buf[0] = cpu_to_be16(reg); |
| |
| error = i2c_master_send(client, (u8 *)chip->xfer_buf, |
| sizeof(*chip->xfer_buf)); |
| if (error >= 0) |
| error = i2c_master_recv(client, (u8 *)chip->xfer_buf, |
| len * sizeof(*chip->xfer_buf)); |
| |
| if (unlikely(error < 0)) { |
| dev_err(&client->dev, "I2C read error: %d\n", error); |
| return error; |
| } |
| |
| for (i = 0; i < len; i++) |
| data[i] = be16_to_cpu(chip->xfer_buf[i]); |
| |
| return 0; |
| } |
| |
| static int ad714x_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct ad714x_chip *chip; |
| |
| chip = ad714x_probe(&client->dev, BUS_I2C, client->irq, |
| ad714x_i2c_read, ad714x_i2c_write); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| |
| i2c_set_clientdata(client, chip); |
| |
| return 0; |
| } |
| |
| static int __devexit ad714x_i2c_remove(struct i2c_client *client) |
| { |
| struct ad714x_chip *chip = i2c_get_clientdata(client); |
| |
| ad714x_remove(chip); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ad714x_id[] = { |
| { "ad7142_captouch", 0 }, |
| { "ad7143_captouch", 0 }, |
| { "ad7147_captouch", 0 }, |
| { "ad7147a_captouch", 0 }, |
| { "ad7148_captouch", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ad714x_id); |
| |
| static struct i2c_driver ad714x_i2c_driver = { |
| .driver = { |
| .name = "ad714x_captouch", |
| .pm = &ad714x_i2c_pm, |
| }, |
| .probe = ad714x_i2c_probe, |
| .remove = ad714x_i2c_remove, |
| .id_table = ad714x_id, |
| }; |
| |
| module_i2c_driver(ad714x_i2c_driver); |
| |
| MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver"); |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); |
| MODULE_LICENSE("GPL"); |