| /* tmp401.c |
| * |
| * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com> |
| * Preliminary tmp411 support by: |
| * Gabriel Konat, Sander Leget, Wouter Willems |
| * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC. |
| * |
| * Note this IC is in some aspect similar to the LM90, but it has quite a |
| * few differences too, for example the local temp has a higher resolution |
| * and thus has 16 bits registers for its value and limit instead of 8 bits. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; |
| |
| /* Insmod parameters */ |
| I2C_CLIENT_INSMOD_2(tmp401, tmp411); |
| |
| /* |
| * The TMP401 registers, note some registers have different addresses for |
| * reading and writing |
| */ |
| #define TMP401_STATUS 0x02 |
| #define TMP401_CONFIG_READ 0x03 |
| #define TMP401_CONFIG_WRITE 0x09 |
| #define TMP401_CONVERSION_RATE_READ 0x04 |
| #define TMP401_CONVERSION_RATE_WRITE 0x0A |
| #define TMP401_TEMP_CRIT_HYST 0x21 |
| #define TMP401_CONSECUTIVE_ALERT 0x22 |
| #define TMP401_MANUFACTURER_ID_REG 0xFE |
| #define TMP401_DEVICE_ID_REG 0xFF |
| #define TMP411_N_FACTOR_REG 0x18 |
| |
| static const u8 TMP401_TEMP_MSB[2] = { 0x00, 0x01 }; |
| static const u8 TMP401_TEMP_LSB[2] = { 0x15, 0x10 }; |
| static const u8 TMP401_TEMP_LOW_LIMIT_MSB_READ[2] = { 0x06, 0x08 }; |
| static const u8 TMP401_TEMP_LOW_LIMIT_MSB_WRITE[2] = { 0x0C, 0x0E }; |
| static const u8 TMP401_TEMP_LOW_LIMIT_LSB[2] = { 0x17, 0x14 }; |
| static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_READ[2] = { 0x05, 0x07 }; |
| static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[2] = { 0x0B, 0x0D }; |
| static const u8 TMP401_TEMP_HIGH_LIMIT_LSB[2] = { 0x16, 0x13 }; |
| /* These are called the THERM limit / hysteresis / mask in the datasheet */ |
| static const u8 TMP401_TEMP_CRIT_LIMIT[2] = { 0x20, 0x19 }; |
| |
| static const u8 TMP411_TEMP_LOWEST_MSB[2] = { 0x30, 0x34 }; |
| static const u8 TMP411_TEMP_LOWEST_LSB[2] = { 0x31, 0x35 }; |
| static const u8 TMP411_TEMP_HIGHEST_MSB[2] = { 0x32, 0x36 }; |
| static const u8 TMP411_TEMP_HIGHEST_LSB[2] = { 0x33, 0x37 }; |
| |
| /* Flags */ |
| #define TMP401_CONFIG_RANGE 0x04 |
| #define TMP401_CONFIG_SHUTDOWN 0x40 |
| #define TMP401_STATUS_LOCAL_CRIT 0x01 |
| #define TMP401_STATUS_REMOTE_CRIT 0x02 |
| #define TMP401_STATUS_REMOTE_OPEN 0x04 |
| #define TMP401_STATUS_REMOTE_LOW 0x08 |
| #define TMP401_STATUS_REMOTE_HIGH 0x10 |
| #define TMP401_STATUS_LOCAL_LOW 0x20 |
| #define TMP401_STATUS_LOCAL_HIGH 0x40 |
| |
| /* Manufacturer / Device ID's */ |
| #define TMP401_MANUFACTURER_ID 0x55 |
| #define TMP401_DEVICE_ID 0x11 |
| #define TMP411_DEVICE_ID 0x12 |
| |
| /* |
| * Functions declarations |
| */ |
| |
| static int tmp401_probe(struct i2c_client *client, |
| const struct i2c_device_id *id); |
| static int tmp401_detect(struct i2c_client *client, int kind, |
| struct i2c_board_info *info); |
| static int tmp401_remove(struct i2c_client *client); |
| static struct tmp401_data *tmp401_update_device(struct device *dev); |
| |
| /* |
| * Driver data (common to all clients) |
| */ |
| |
| static const struct i2c_device_id tmp401_id[] = { |
| { "tmp401", tmp401 }, |
| { "tmp411", tmp411 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tmp401_id); |
| |
| static struct i2c_driver tmp401_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "tmp401", |
| }, |
| .probe = tmp401_probe, |
| .remove = tmp401_remove, |
| .id_table = tmp401_id, |
| .detect = tmp401_detect, |
| .address_data = &addr_data, |
| }; |
| |
| /* |
| * Client data (each client gets its own) |
| */ |
| |
| struct tmp401_data { |
| struct device *hwmon_dev; |
| struct mutex update_lock; |
| char valid; /* zero until following fields are valid */ |
| unsigned long last_updated; /* in jiffies */ |
| int kind; |
| |
| /* register values */ |
| u8 status; |
| u8 config; |
| u16 temp[2]; |
| u16 temp_low[2]; |
| u16 temp_high[2]; |
| u8 temp_crit[2]; |
| u8 temp_crit_hyst; |
| u16 temp_lowest[2]; |
| u16 temp_highest[2]; |
| }; |
| |
| /* |
| * Sysfs attr show / store functions |
| */ |
| |
| static int tmp401_register_to_temp(u16 reg, u8 config) |
| { |
| int temp = reg; |
| |
| if (config & TMP401_CONFIG_RANGE) |
| temp -= 64 * 256; |
| |
| return (temp * 625 + 80) / 160; |
| } |
| |
| static u16 tmp401_temp_to_register(long temp, u8 config) |
| { |
| if (config & TMP401_CONFIG_RANGE) { |
| temp = SENSORS_LIMIT(temp, -64000, 191000); |
| temp += 64000; |
| } else |
| temp = SENSORS_LIMIT(temp, 0, 127000); |
| |
| return (temp * 160 + 312) / 625; |
| } |
| |
| static int tmp401_crit_register_to_temp(u8 reg, u8 config) |
| { |
| int temp = reg; |
| |
| if (config & TMP401_CONFIG_RANGE) |
| temp -= 64; |
| |
| return temp * 1000; |
| } |
| |
| static u8 tmp401_crit_temp_to_register(long temp, u8 config) |
| { |
| if (config & TMP401_CONFIG_RANGE) { |
| temp = SENSORS_LIMIT(temp, -64000, 191000); |
| temp += 64000; |
| } else |
| temp = SENSORS_LIMIT(temp, 0, 127000); |
| |
| return (temp + 500) / 1000; |
| } |
| |
| static ssize_t show_temp_value(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| tmp401_register_to_temp(data->temp[index], data->config)); |
| } |
| |
| static ssize_t show_temp_min(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| tmp401_register_to_temp(data->temp_low[index], data->config)); |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| tmp401_register_to_temp(data->temp_high[index], data->config)); |
| } |
| |
| static ssize_t show_temp_crit(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| tmp401_crit_register_to_temp(data->temp_crit[index], |
| data->config)); |
| } |
| |
| static ssize_t show_temp_crit_hyst(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int temp, index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| mutex_lock(&data->update_lock); |
| temp = tmp401_crit_register_to_temp(data->temp_crit[index], |
| data->config); |
| temp -= data->temp_crit_hyst * 1000; |
| mutex_unlock(&data->update_lock); |
| |
| return sprintf(buf, "%d\n", temp); |
| } |
| |
| static ssize_t show_temp_lowest(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| tmp401_register_to_temp(data->temp_lowest[index], |
| data->config)); |
| } |
| |
| static ssize_t show_temp_highest(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| tmp401_register_to_temp(data->temp_highest[index], |
| data->config)); |
| } |
| |
| static ssize_t show_status(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int mask = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| |
| if (data->status & mask) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t store_temp_min(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| long val; |
| u16 reg; |
| |
| if (strict_strtol(buf, 10, &val)) |
| return -EINVAL; |
| |
| reg = tmp401_temp_to_register(val, data->config); |
| |
| mutex_lock(&data->update_lock); |
| |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP401_TEMP_LOW_LIMIT_MSB_WRITE[index], reg >> 8); |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP401_TEMP_LOW_LIMIT_LSB[index], reg & 0xFF); |
| |
| data->temp_low[index] = reg; |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t store_temp_max(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| long val; |
| u16 reg; |
| |
| if (strict_strtol(buf, 10, &val)) |
| return -EINVAL; |
| |
| reg = tmp401_temp_to_register(val, data->config); |
| |
| mutex_lock(&data->update_lock); |
| |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[index], reg >> 8); |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP401_TEMP_HIGH_LIMIT_LSB[index], reg & 0xFF); |
| |
| data->temp_high[index] = reg; |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t store_temp_crit(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| long val; |
| u8 reg; |
| |
| if (strict_strtol(buf, 10, &val)) |
| return -EINVAL; |
| |
| reg = tmp401_crit_temp_to_register(val, data->config); |
| |
| mutex_lock(&data->update_lock); |
| |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP401_TEMP_CRIT_LIMIT[index], reg); |
| |
| data->temp_crit[index] = reg; |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| int temp, index = to_sensor_dev_attr(devattr)->index; |
| struct tmp401_data *data = tmp401_update_device(dev); |
| long val; |
| u8 reg; |
| |
| if (strict_strtol(buf, 10, &val)) |
| return -EINVAL; |
| |
| if (data->config & TMP401_CONFIG_RANGE) |
| val = SENSORS_LIMIT(val, -64000, 191000); |
| else |
| val = SENSORS_LIMIT(val, 0, 127000); |
| |
| mutex_lock(&data->update_lock); |
| temp = tmp401_crit_register_to_temp(data->temp_crit[index], |
| data->config); |
| val = SENSORS_LIMIT(val, temp - 255000, temp); |
| reg = ((temp - val) + 500) / 1000; |
| |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP401_TEMP_CRIT_HYST, reg); |
| |
| data->temp_crit_hyst = reg; |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| /* |
| * Resets the historical measurements of minimum and maximum temperatures. |
| * This is done by writing any value to any of the minimum/maximum registers |
| * (0x30-0x37). |
| */ |
| static ssize_t reset_temp_history(struct device *dev, |
| struct device_attribute *devattr, const char *buf, size_t count) |
| { |
| long val; |
| |
| if (strict_strtol(buf, 10, &val)) |
| return -EINVAL; |
| |
| if (val != 1) { |
| dev_err(dev, "temp_reset_history value %ld not" |
| " supported. Use 1 to reset the history!\n", val); |
| return -EINVAL; |
| } |
| i2c_smbus_write_byte_data(to_i2c_client(dev), |
| TMP411_TEMP_LOWEST_MSB[0], val); |
| |
| return count; |
| } |
| |
| static struct sensor_device_attribute tmp401_attr[] = { |
| SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0), |
| SENSOR_ATTR(temp1_min, 0644, show_temp_min, store_temp_min, 0), |
| SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0), |
| SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0), |
| SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst, |
| store_temp_crit_hyst, 0), |
| SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL, |
| TMP401_STATUS_LOCAL_LOW), |
| SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL, |
| TMP401_STATUS_LOCAL_HIGH), |
| SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL, |
| TMP401_STATUS_LOCAL_CRIT), |
| SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1), |
| SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1), |
| SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1), |
| SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1), |
| SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1), |
| SENSOR_ATTR(temp2_fault, 0444, show_status, NULL, |
| TMP401_STATUS_REMOTE_OPEN), |
| SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL, |
| TMP401_STATUS_REMOTE_LOW), |
| SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL, |
| TMP401_STATUS_REMOTE_HIGH), |
| SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL, |
| TMP401_STATUS_REMOTE_CRIT), |
| }; |
| |
| /* |
| * Additional features of the TMP411 chip. |
| * The TMP411 stores the minimum and maximum |
| * temperature measured since power-on, chip-reset, or |
| * minimum and maximum register reset for both the local |
| * and remote channels. |
| */ |
| static struct sensor_device_attribute tmp411_attr[] = { |
| SENSOR_ATTR(temp1_highest, 0444, show_temp_highest, NULL, 0), |
| SENSOR_ATTR(temp1_lowest, 0444, show_temp_lowest, NULL, 0), |
| SENSOR_ATTR(temp2_highest, 0444, show_temp_highest, NULL, 1), |
| SENSOR_ATTR(temp2_lowest, 0444, show_temp_lowest, NULL, 1), |
| SENSOR_ATTR(temp_reset_history, 0200, NULL, reset_temp_history, 0), |
| }; |
| |
| /* |
| * Begin non sysfs callback code (aka Real code) |
| */ |
| |
| static void tmp401_init_client(struct i2c_client *client) |
| { |
| int config, config_orig; |
| |
| /* Set the conversion rate to 2 Hz */ |
| i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5); |
| |
| /* Start conversions (disable shutdown if necessary) */ |
| config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); |
| if (config < 0) { |
| dev_warn(&client->dev, "Initialization failed!\n"); |
| return; |
| } |
| |
| config_orig = config; |
| config &= ~TMP401_CONFIG_SHUTDOWN; |
| |
| if (config != config_orig) |
| i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config); |
| } |
| |
| static int tmp401_detect(struct i2c_client *client, int _kind, |
| struct i2c_board_info *info) |
| { |
| enum chips kind; |
| struct i2c_adapter *adapter = client->adapter; |
| u8 reg; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* Detect and identify the chip */ |
| reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG); |
| if (reg != TMP401_MANUFACTURER_ID) |
| return -ENODEV; |
| |
| reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG); |
| |
| switch (reg) { |
| case TMP401_DEVICE_ID: |
| kind = tmp401; |
| break; |
| case TMP411_DEVICE_ID: |
| kind = tmp411; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); |
| if (reg & 0x1b) |
| return -ENODEV; |
| |
| reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ); |
| /* Datasheet says: 0x1-0x6 */ |
| if (reg > 15) |
| return -ENODEV; |
| |
| strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int tmp401_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int i, err = 0; |
| struct tmp401_data *data; |
| const char *names[] = { "TMP401", "TMP411" }; |
| |
| data = kzalloc(sizeof(struct tmp401_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, data); |
| mutex_init(&data->update_lock); |
| data->kind = id->driver_data; |
| |
| /* Initialize the TMP401 chip */ |
| tmp401_init_client(client); |
| |
| /* Register sysfs hooks */ |
| for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++) { |
| err = device_create_file(&client->dev, |
| &tmp401_attr[i].dev_attr); |
| if (err) |
| goto exit_remove; |
| } |
| |
| /* Register aditional tmp411 sysfs hooks */ |
| if (data->kind == tmp411) { |
| for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) { |
| err = device_create_file(&client->dev, |
| &tmp411_attr[i].dev_attr); |
| if (err) |
| goto exit_remove; |
| } |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&client->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| data->hwmon_dev = NULL; |
| goto exit_remove; |
| } |
| |
| dev_info(&client->dev, "Detected TI %s chip\n", |
| names[data->kind - 1]); |
| |
| return 0; |
| |
| exit_remove: |
| tmp401_remove(client); /* will also free data for us */ |
| return err; |
| } |
| |
| static int tmp401_remove(struct i2c_client *client) |
| { |
| struct tmp401_data *data = i2c_get_clientdata(client); |
| int i; |
| |
| if (data->hwmon_dev) |
| hwmon_device_unregister(data->hwmon_dev); |
| |
| for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++) |
| device_remove_file(&client->dev, &tmp401_attr[i].dev_attr); |
| |
| if (data->kind == tmp411) { |
| for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) |
| device_remove_file(&client->dev, |
| &tmp411_attr[i].dev_attr); |
| } |
| |
| kfree(data); |
| return 0; |
| } |
| |
| static struct tmp401_data *tmp401_update_device_reg16( |
| struct i2c_client *client, struct tmp401_data *data) |
| { |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| /* |
| * High byte must be read first immediately followed |
| * by the low byte |
| */ |
| data->temp[i] = i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_MSB[i]) << 8; |
| data->temp[i] |= i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_LSB[i]); |
| data->temp_low[i] = i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8; |
| data->temp_low[i] |= i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_LOW_LIMIT_LSB[i]); |
| data->temp_high[i] = i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8; |
| data->temp_high[i] |= i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_HIGH_LIMIT_LSB[i]); |
| data->temp_crit[i] = i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_CRIT_LIMIT[i]); |
| |
| if (data->kind == tmp411) { |
| data->temp_lowest[i] = i2c_smbus_read_byte_data(client, |
| TMP411_TEMP_LOWEST_MSB[i]) << 8; |
| data->temp_lowest[i] |= i2c_smbus_read_byte_data( |
| client, TMP411_TEMP_LOWEST_LSB[i]); |
| |
| data->temp_highest[i] = i2c_smbus_read_byte_data( |
| client, TMP411_TEMP_HIGHEST_MSB[i]) << 8; |
| data->temp_highest[i] |= i2c_smbus_read_byte_data( |
| client, TMP411_TEMP_HIGHEST_LSB[i]); |
| } |
| } |
| return data; |
| } |
| |
| static struct tmp401_data *tmp401_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tmp401_data *data = i2c_get_clientdata(client); |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS); |
| data->config = i2c_smbus_read_byte_data(client, |
| TMP401_CONFIG_READ); |
| tmp401_update_device_reg16(client, data); |
| |
| data->temp_crit_hyst = i2c_smbus_read_byte_data(client, |
| TMP401_TEMP_CRIT_HYST); |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| static int __init tmp401_init(void) |
| { |
| return i2c_add_driver(&tmp401_driver); |
| } |
| |
| static void __exit tmp401_exit(void) |
| { |
| i2c_del_driver(&tmp401_driver); |
| } |
| |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(tmp401_init); |
| module_exit(tmp401_exit); |