| NVIDIA Tegra30 timer |
| |
| The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free |
| running counter, and 5 watchdog modules. The first two channels may also |
| trigger a legacy watchdog reset. |
| |
| Required properties: |
| |
| - compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer". |
| - reg : Specifies base physical address and size of the registers. |
| - interrupts : A list of 6 interrupts; one per each of timer channels 1 |
| through 5, and one for the shared interrupt for the remaining channels. |
| - clocks : Must contain one entry, for the module clock. |
| See ../clocks/clock-bindings.txt for details. |
| |
| timer { |
| compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; |
| reg = <0x60005000 0x400>; |
| interrupts = <0 0 0x04 |
| 0 1 0x04 |
| 0 41 0x04 |
| 0 42 0x04 |
| 0 121 0x04 |
| 0 122 0x04>; |
| clocks = <&tegra_car 214>; |
| }; |
