drivers/misc/mic/host/mic_x100.c - arm/linux-arm64-legacy - Git at Google

 /*
  * Intel MIC Platform Software Stack (MPSS)
  *
  * Copyright(c) 2013 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, version 2, as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  * General Public License for more details.
  *
  * The full GNU General Public License is included in this distribution in
  * the file called "COPYING".
  *
  * Intel MIC Host driver.
  *
  */
 #include <linux/fs.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/firmware.h>
 #include <linux/delay.h>

 #include "../common/mic_dev.h"
 #include "mic_device.h"
 #include "mic_x100.h"
 #include "mic_smpt.h"

 /**
  * mic_x100_write_spad - write to the scratchpad register
  * @mdev: pointer to mic_device instance
  * @idx: index to the scratchpad register, 0 based
  * @val: the data value to put into the register
  *
  * This function allows writing of a 32bit value to the indexed scratchpad
  * register.
  *
  * RETURNS: none.
  */
 static void
 mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val)
 {
 	dev_dbg(mdev->sdev->parent, "Writing 0x%x to scratch pad index %d\n",
 		val, idx);
 	mic_mmio_write(&mdev->mmio, val,
 		       MIC_X100_SBOX_BASE_ADDRESS +
 		       MIC_X100_SBOX_SPAD0 + idx * 4);
 }

 /**
  * mic_x100_read_spad - read from the scratchpad register
  * @mdev: pointer to mic_device instance
  * @idx: index to scratchpad register, 0 based
  *
  * This function allows reading of the 32bit scratchpad register.
  *
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 static u32
 mic_x100_read_spad(struct mic_device *mdev, unsigned int idx)
 {
 	u32 val = mic_mmio_read(&mdev->mmio,
 		MIC_X100_SBOX_BASE_ADDRESS +
 		MIC_X100_SBOX_SPAD0 + idx * 4);

 	dev_dbg(mdev->sdev->parent,
 		"Reading 0x%x from scratch pad index %d\n", val, idx);
 	return val;
 }

 /**
  * mic_x100_enable_interrupts - Enable interrupts.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_enable_interrupts(struct mic_device *mdev)
 {
 	u32 reg;
 	struct mic_mw *mw = &mdev->mmio;
 	u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
 	u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;

 	reg = mic_mmio_read(mw, sice0);
 	reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff);
 	mic_mmio_write(mw, reg, sice0);

 	/*
 	 * Enable auto-clear when enabling interrupts. Applicable only for
 	 * MSI-x. Legacy and MSI mode cannot have auto-clear enabled.
 	 */
 	if (mdev->irq_info.num_vectors > 1) {
 		reg = mic_mmio_read(mw, siac0);
 		reg |= MIC_X100_SBOX_DBR_BITS(0xf) |
 			MIC_X100_SBOX_DMA_BITS(0xff);
 		mic_mmio_write(mw, reg, siac0);
 	}
 }

 /**
  * mic_x100_disable_interrupts - Disable interrupts.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_disable_interrupts(struct mic_device *mdev)
 {
 	u32 reg;
 	struct mic_mw *mw = &mdev->mmio;
 	u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
 	u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
 	u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0;

 	reg = mic_mmio_read(mw, sice0);
 	mic_mmio_write(mw, reg, sicc0);

 	if (mdev->irq_info.num_vectors > 1) {
 		reg = mic_mmio_read(mw, siac0);
 		reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) |
 			MIC_X100_SBOX_DMA_BITS(0xff));
 		mic_mmio_write(mw, reg, siac0);
 	}
 }

 /**
  * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_send_sbox_intr(struct mic_device *mdev,
 			int doorbell)
 {
 	struct mic_mw *mw = &mdev->mmio;
 	u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
 	u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
 					apic_icr_offset);

 	/* for MIC we need to make sure we "hit" the send_icr bit (13) */
 	apicicr_low = (apicicr_low | (1 << 13));

 	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
 	wmb();
 	mic_mmio_write(mw, apicicr_low,
 		       MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
 }

 /**
  * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
 			int doorbell)
 {
 	int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
 	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
 	wmb();
 	mic_mmio_write(&mdev->mmio, 0,
 		       MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
 }

 /**
  * __mic_x100_send_intr - Send interrupt to MIC.
  * @mdev: pointer to mic_device instance
  * @doorbell: doorbell number.
  */
 static void mic_x100_send_intr(struct mic_device *mdev, int doorbell)
 {
 	int rdmasr_db;
 	if (doorbell < MIC_X100_NUM_SBOX_IRQ) {
 		mic_x100_send_sbox_intr(mdev, doorbell);
 	} else {
 		rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ +
 			MIC_X100_RDMASR_IRQ_BASE;
 		mic_x100_send_rdmasr_intr(mdev, rdmasr_db);
 	}
 }

 /**
  * mic_x100_ack_interrupt - Read the interrupt sources register and
  * clear it. This function will be called in the MSI/INTx case.
  * @mdev: Pointer to mic_device instance.
  *
  * Returns: bitmask of interrupt sources triggered.
  */
 static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
 {
 	u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
 	u32 reg = mic_mmio_read(&mdev->mmio, sicr0);
 	mic_mmio_write(&mdev->mmio, reg, sicr0);
 	return reg;
 }

 /**
  * mic_x100_intr_workarounds - These hardware specific workarounds are
  * to be invoked everytime an interrupt is handled.
  * @mdev: Pointer to mic_device instance.
  *
  * Returns: none
  */
 static void mic_x100_intr_workarounds(struct mic_device *mdev)
 {
 	struct mic_mw *mw = &mdev->mmio;

 	/* Clear pending bit array. */
 	if (MIC_A0_STEP == mdev->stepping)
 		mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
 			MIC_X100_SBOX_MSIXPBACR);

 	if (mdev->stepping >= MIC_B0_STEP)
 		mdev->intr_ops->enable_interrupts(mdev);
 }

 /**
  * mic_x100_hw_intr_init - Initialize h/w specific interrupt
  * information.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_hw_intr_init(struct mic_device *mdev)
 {
 	mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init;
 }

 /**
  * mic_x100_read_msi_to_src_map - read from the MSI mapping registers
  * @mdev: pointer to mic_device instance
  * @idx: index to the mapping register, 0 based
  *
  * This function allows reading of the 32bit MSI mapping register.
  *
  * RETURNS: The value in the register.
  */
 static u32
 mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx)
 {
 	return mic_mmio_read(&mdev->mmio,
 		MIC_X100_SBOX_BASE_ADDRESS +
 		MIC_X100_SBOX_MXAR0 + idx * 4);
 }

 /**
  * mic_x100_program_msi_to_src_map - program the MSI mapping registers
  * @mdev: pointer to mic_device instance
  * @idx: index to the mapping register, 0 based
  * @offset: The bit offset in the register that needs to be updated.
  * @set: boolean specifying if the bit in the specified offset needs
  * to be set or cleared.
  *
  * RETURNS: None.
  */
 static void
 mic_x100_program_msi_to_src_map(struct mic_device *mdev,
 				int idx, int offset, bool set)
 {
 	unsigned long reg;
 	struct mic_mw *mw = &mdev->mmio;
 	u32 mxar = MIC_X100_SBOX_BASE_ADDRESS +
 		MIC_X100_SBOX_MXAR0 + idx * 4;

 	reg = mic_mmio_read(mw, mxar);
 	if (set)
 		__set_bit(offset, &reg);
 	else
 		__clear_bit(offset, &reg);
 	mic_mmio_write(mw, reg, mxar);
 }

 /*
  * mic_x100_reset_fw_ready - Reset Firmware ready status field.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_reset_fw_ready(struct mic_device *mdev)
 {
 	mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0);
 }

 /*
  * mic_x100_is_fw_ready - Check if firmware is ready.
  * @mdev: pointer to mic_device instance
  */
 static bool mic_x100_is_fw_ready(struct mic_device *mdev)
 {
 	u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
 	return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false;
 }

 /**
  * mic_x100_get_apic_id - Get bootstrap APIC ID.
  * @mdev: pointer to mic_device instance
  */
 static u32 mic_x100_get_apic_id(struct mic_device *mdev)
 {
 	u32 scratch2 = 0;

 	scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
 	return MIC_X100_SPAD2_APIC_ID(scratch2);
 }

 /**
  * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_send_firmware_intr(struct mic_device *mdev)
 {
 	u32 apicicr_low;
 	u64 apic_icr_offset = MIC_X100_SBOX_APICICR7;
 	int vector = MIC_X100_BSP_INTERRUPT_VECTOR;
 	struct mic_mw *mw = &mdev->mmio;

 	/*
 	 * For MIC we need to make sure we "hit"
 	 * the send_icr bit (13).
 	 */
 	apicicr_low = (vector | (1 << 13));

 	mic_mmio_write(mw, mic_x100_get_apic_id(mdev),
 		       MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4);

 	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
 	wmb();
 	mic_mmio_write(mw, apicicr_low,
 		       MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
 }

 /**
  * mic_x100_hw_reset - Reset the MIC device.
  * @mdev: pointer to mic_device instance
  */
 static void mic_x100_hw_reset(struct mic_device *mdev)
 {
 	u32 reset_reg;
 	u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR;
 	struct mic_mw *mw = &mdev->mmio;

 	/* Ensure that the reset is ordered w.r.t. previous loads and stores */
 	mb();
 	/* Trigger reset */
 	reset_reg = mic_mmio_read(mw, rgcr);
 	reset_reg |= 0x1;
 	mic_mmio_write(mw, reset_reg, rgcr);
 	/*
 	 * It seems we really want to delay at least 1 second
 	 * after touching reset to prevent a lot of problems.
 	 */
 	msleep(1000);
 }

 /**
  * mic_x100_load_command_line - Load command line to MIC.
  * @mdev: pointer to mic_device instance
  * @fw: the firmware image
  *
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 static int
 mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw)
 {
 	u32 len = 0;
 	u32 boot_mem;
 	char *buf;
 	void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size;
 #define CMDLINE_SIZE 2048

 	boot_mem = mdev->aper.len >> 20;
 	buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL);
 	if (!buf) {
 		dev_err(mdev->sdev->parent,
 			"%s %d allocation failed\n", __func__, __LINE__);
 		return -ENOMEM;
 	}
 	len += snprintf(buf, CMDLINE_SIZE - len,
 		" mem=%dM", boot_mem);
 	if (mdev->cmdline)
 		snprintf(buf + len, CMDLINE_SIZE - len, " %s", mdev->cmdline);
 	memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
 	kfree(buf);
 	return 0;
 }

 /**
  * mic_x100_load_ramdisk - Load ramdisk to MIC.
  * @mdev: pointer to mic_device instance
  *
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 static int
 mic_x100_load_ramdisk(struct mic_device *mdev)
 {
 	const struct firmware *fw;
 	int rc;
 	struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr;

 	rc = request_firmware(&fw,
 			mdev->ramdisk, mdev->sdev->parent);
 	if (rc < 0) {
 		dev_err(mdev->sdev->parent,
 			"ramdisk request_firmware failed: %d %s\n",
 			rc, mdev->ramdisk);
 		goto error;
 	}
 	/*
 	 * Typically the bootaddr for card OS is 64M
 	 * so copy over the ramdisk @ 128M.
 	 */
 	memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
 	iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image);
 	iowrite32(fw->size, &bp->hdr.ramdisk_size);
 	release_firmware(fw);
 error:
 	return rc;
 }

 /**
  * mic_x100_get_boot_addr - Get MIC boot address.
  * @mdev: pointer to mic_device instance
  *
  * This function is called during firmware load to determine
  * the address at which the OS should be downloaded in card
  * memory i.e. GDDR.
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 static int
 mic_x100_get_boot_addr(struct mic_device *mdev)
 {
 	u32 scratch2, boot_addr;
 	int rc = 0;

 	scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
 	boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2);
 	dev_dbg(mdev->sdev->parent, "%s %d boot_addr 0x%x\n",
 		__func__, __LINE__, boot_addr);
 	if (boot_addr > (1 << 31)) {
 		dev_err(mdev->sdev->parent,
 			"incorrect bootaddr 0x%x\n",
 			boot_addr);
 		rc = -EINVAL;
 		goto error;
 	}
 	mdev->bootaddr = boot_addr;
 error:
 	return rc;
 }

 /**
  * mic_x100_load_firmware - Load firmware to MIC.
  * @mdev: pointer to mic_device instance
  * @buf: buffer containing boot string including firmware/ramdisk path.
  *
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 static int
 mic_x100_load_firmware(struct mic_device *mdev, const char *buf)
 {
 	int rc;
 	const struct firmware *fw;

 	rc = mic_x100_get_boot_addr(mdev);
 	if (rc)
 		goto error;
 	/* load OS */
 	rc = request_firmware(&fw, mdev->firmware, mdev->sdev->parent);
 	if (rc < 0) {
 		dev_err(mdev->sdev->parent,
 			"ramdisk request_firmware failed: %d %s\n",
 			rc, mdev->firmware);
 		goto error;
 	}
 	if (mdev->bootaddr > mdev->aper.len - fw->size) {
 		rc = -EINVAL;
 		dev_err(mdev->sdev->parent, "%s %d rc %d bootaddr 0x%x\n",
 			__func__, __LINE__, rc, mdev->bootaddr);
 		release_firmware(fw);
 		goto error;
 	}
 	memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size);
 	mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size);
 	if (!strcmp(mdev->bootmode, "elf"))
 		goto done;
 	/* load command line */
 	rc = mic_x100_load_command_line(mdev, fw);
 	if (rc) {
 		dev_err(mdev->sdev->parent, "%s %d rc %d\n",
 			__func__, __LINE__, rc);
 		goto error;
 	}
 	release_firmware(fw);
 	/* load ramdisk */
 	if (mdev->ramdisk)
 		rc = mic_x100_load_ramdisk(mdev);
 error:
 	dev_dbg(mdev->sdev->parent, "%s %d rc %d\n", __func__, __LINE__, rc);
 done:
 	return rc;
 }

 /**
  * mic_x100_get_postcode - Get postcode status from firmware.
  * @mdev: pointer to mic_device instance
  *
  * RETURNS: postcode.
  */
 static u32 mic_x100_get_postcode(struct mic_device *mdev)
 {
 	return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE);
 }

 /**
  * mic_x100_smpt_set - Update an SMPT entry with a DMA address.
  * @mdev: pointer to mic_device instance
  *
  * RETURNS: none.
  */
 static void
 mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index)
 {
 #define SNOOP_ON	(0 << 0)
 #define SNOOP_OFF	(1 << 0)
 /*
  * Sbox Smpt Reg Bits:
  * Bits	31:2	Host address
  * Bits	1	RSVD
  * Bits	0	No snoop
  */
 #define BUILD_SMPT(NO_SNOOP, HOST_ADDR)  \
 	(u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01))

 	uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON,
 			dma_addr >> mdev->smpt->info.page_shift);
 	mic_mmio_write(&mdev->mmio, smpt_reg_val,
 		       MIC_X100_SBOX_BASE_ADDRESS +
 		       MIC_X100_SBOX_SMPT00 + (4 * index));
 }

 /**
  * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields.
  * @mdev: pointer to mic_device instance
  *
  * RETURNS: none.
  */
 static void mic_x100_smpt_hw_init(struct mic_device *mdev)
 {
 	struct mic_smpt_hw_info *info = &mdev->smpt->info;

 	info->num_reg = 32;
 	info->page_shift = 34;
 	info->page_size = (1ULL << info->page_shift);
 	info->base = 0x8000000000ULL;
 }

 struct mic_smpt_ops mic_x100_smpt_ops = {
 	.init = mic_x100_smpt_hw_init,
 	.set = mic_x100_smpt_set,
 };

 struct mic_hw_ops mic_x100_ops = {
 	.aper_bar = MIC_X100_APER_BAR,
 	.mmio_bar = MIC_X100_MMIO_BAR,
 	.read_spad = mic_x100_read_spad,
 	.write_spad = mic_x100_write_spad,
 	.send_intr = mic_x100_send_intr,
 	.ack_interrupt = mic_x100_ack_interrupt,
 	.intr_workarounds = mic_x100_intr_workarounds,
 	.reset = mic_x100_hw_reset,
 	.reset_fw_ready = mic_x100_reset_fw_ready,
 	.is_fw_ready = mic_x100_is_fw_ready,
 	.send_firmware_intr = mic_x100_send_firmware_intr,
 	.load_mic_fw = mic_x100_load_firmware,
 	.get_postcode = mic_x100_get_postcode,
 };

 struct mic_hw_intr_ops mic_x100_intr_ops = {
 	.intr_init = mic_x100_hw_intr_init,
 	.enable_interrupts = mic_x100_enable_interrupts,
 	.disable_interrupts = mic_x100_disable_interrupts,
 	.program_msi_to_src_map = mic_x100_program_msi_to_src_map,
 	.read_msi_to_src_map = mic_x100_read_msi_to_src_map,
 };
	/*
	* Intel MIC Platform Software Stack (MPSS)
	*
	* Copyright(c) 2013 Intel Corporation.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License, version 2, as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* The full GNU General Public License is included in this distribution in
	* the file called "COPYING".
	*
	* Intel MIC Host driver.
	*
	*/
	#include <linux/fs.h>
	#include <linux/pci.h>
	#include <linux/sched.h>
	#include <linux/firmware.h>
	#include <linux/delay.h>

	#include "../common/mic_dev.h"
	#include "mic_device.h"
	#include "mic_x100.h"
	#include "mic_smpt.h"

	/**
	* mic_x100_write_spad - write to the scratchpad register
	* @mdev: pointer to mic_device instance
	* @idx: index to the scratchpad register, 0 based
	* @val: the data value to put into the register
	*
	* This function allows writing of a 32bit value to the indexed scratchpad
	* register.
	*
	* RETURNS: none.
	*/
	static void
	mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val)
	{
	dev_dbg(mdev->sdev->parent, "Writing 0x%x to scratch pad index %d\n",
	val, idx);
	mic_mmio_write(&mdev->mmio, val,
	MIC_X100_SBOX_BASE_ADDRESS +
	MIC_X100_SBOX_SPAD0 + idx * 4);
	}

	/**
	* mic_x100_read_spad - read from the scratchpad register
	* @mdev: pointer to mic_device instance
	* @idx: index to scratchpad register, 0 based
	*
	* This function allows reading of the 32bit scratchpad register.
	*
	* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
	*/
	static u32
	mic_x100_read_spad(struct mic_device *mdev, unsigned int idx)
	{
	u32 val = mic_mmio_read(&mdev->mmio,
	MIC_X100_SBOX_BASE_ADDRESS +
	MIC_X100_SBOX_SPAD0 + idx * 4);

	dev_dbg(mdev->sdev->parent,
	"Reading 0x%x from scratch pad index %d\n", val, idx);
	return val;
	}

	/**
	* mic_x100_enable_interrupts - Enable interrupts.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_enable_interrupts(struct mic_device *mdev)
	{
	u32 reg;
	struct mic_mw *mw = &mdev->mmio;
	u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
	u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;

	reg = mic_mmio_read(mw, sice0);
	reg \|= MIC_X100_SBOX_DBR_BITS(0xf) \| MIC_X100_SBOX_DMA_BITS(0xff);
	mic_mmio_write(mw, reg, sice0);

	/*
	* Enable auto-clear when enabling interrupts. Applicable only for
	* MSI-x. Legacy and MSI mode cannot have auto-clear enabled.
	*/
	if (mdev->irq_info.num_vectors > 1) {
	reg = mic_mmio_read(mw, siac0);
	reg \|= MIC_X100_SBOX_DBR_BITS(0xf) \|
	MIC_X100_SBOX_DMA_BITS(0xff);
	mic_mmio_write(mw, reg, siac0);
	}
	}

	/**
	* mic_x100_disable_interrupts - Disable interrupts.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_disable_interrupts(struct mic_device *mdev)
	{
	u32 reg;
	struct mic_mw *mw = &mdev->mmio;
	u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
	u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
	u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0;

	reg = mic_mmio_read(mw, sice0);
	mic_mmio_write(mw, reg, sicc0);

	if (mdev->irq_info.num_vectors > 1) {
	reg = mic_mmio_read(mw, siac0);
	reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) \|
	MIC_X100_SBOX_DMA_BITS(0xff));
	mic_mmio_write(mw, reg, siac0);
	}
	}

	/**
	* mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_send_sbox_intr(struct mic_device *mdev,
	int doorbell)
	{
	struct mic_mw *mw = &mdev->mmio;
	u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
	u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
	apic_icr_offset);

	/* for MIC we need to make sure we "hit" the send_icr bit (13) */
	apicicr_low = (apicicr_low \| (1 << 13));

	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
	wmb();
	mic_mmio_write(mw, apicicr_low,
	MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
	}

	/**
	* mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
	int doorbell)
	{
	int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
	wmb();
	mic_mmio_write(&mdev->mmio, 0,
	MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
	}

	/**
	* __mic_x100_send_intr - Send interrupt to MIC.
	* @mdev: pointer to mic_device instance
	* @doorbell: doorbell number.
	*/
	static void mic_x100_send_intr(struct mic_device *mdev, int doorbell)
	{
	int rdmasr_db;
	if (doorbell < MIC_X100_NUM_SBOX_IRQ) {
	mic_x100_send_sbox_intr(mdev, doorbell);
	} else {
	rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ +
	MIC_X100_RDMASR_IRQ_BASE;
	mic_x100_send_rdmasr_intr(mdev, rdmasr_db);
	}
	}

	/**
	* mic_x100_ack_interrupt - Read the interrupt sources register and
	* clear it. This function will be called in the MSI/INTx case.
	* @mdev: Pointer to mic_device instance.
	*
	* Returns: bitmask of interrupt sources triggered.
	*/
	static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
	{
	u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
	u32 reg = mic_mmio_read(&mdev->mmio, sicr0);
	mic_mmio_write(&mdev->mmio, reg, sicr0);
	return reg;
	}

	/**
	* mic_x100_intr_workarounds - These hardware specific workarounds are
	* to be invoked everytime an interrupt is handled.
	* @mdev: Pointer to mic_device instance.
	*
	* Returns: none
	*/
	static void mic_x100_intr_workarounds(struct mic_device *mdev)
	{
	struct mic_mw *mw = &mdev->mmio;

	/* Clear pending bit array. */
	if (MIC_A0_STEP == mdev->stepping)
	mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
	MIC_X100_SBOX_MSIXPBACR);

	if (mdev->stepping >= MIC_B0_STEP)
	mdev->intr_ops->enable_interrupts(mdev);
	}

	/**
	* mic_x100_hw_intr_init - Initialize h/w specific interrupt
	* information.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_hw_intr_init(struct mic_device *mdev)
	{
	mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init;
	}

	/**
	* mic_x100_read_msi_to_src_map - read from the MSI mapping registers
	* @mdev: pointer to mic_device instance
	* @idx: index to the mapping register, 0 based
	*
	* This function allows reading of the 32bit MSI mapping register.
	*
	* RETURNS: The value in the register.
	*/
	static u32
	mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx)
	{
	return mic_mmio_read(&mdev->mmio,
	MIC_X100_SBOX_BASE_ADDRESS +
	MIC_X100_SBOX_MXAR0 + idx * 4);
	}

	/**
	* mic_x100_program_msi_to_src_map - program the MSI mapping registers
	* @mdev: pointer to mic_device instance
	* @idx: index to the mapping register, 0 based
	* @offset: The bit offset in the register that needs to be updated.
	* @set: boolean specifying if the bit in the specified offset needs
	* to be set or cleared.
	*
	* RETURNS: None.
	*/
	static void
	mic_x100_program_msi_to_src_map(struct mic_device *mdev,
	int idx, int offset, bool set)
	{
	unsigned long reg;
	struct mic_mw *mw = &mdev->mmio;
	u32 mxar = MIC_X100_SBOX_BASE_ADDRESS +
	MIC_X100_SBOX_MXAR0 + idx * 4;

	reg = mic_mmio_read(mw, mxar);
	if (set)
	__set_bit(offset, &reg);
	else
	__clear_bit(offset, &reg);
	mic_mmio_write(mw, reg, mxar);
	}

	/*
	* mic_x100_reset_fw_ready - Reset Firmware ready status field.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_reset_fw_ready(struct mic_device *mdev)
	{
	mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0);
	}

	/*
	* mic_x100_is_fw_ready - Check if firmware is ready.
	* @mdev: pointer to mic_device instance
	*/
	static bool mic_x100_is_fw_ready(struct mic_device *mdev)
	{
	u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
	return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false;
	}

	/**
	* mic_x100_get_apic_id - Get bootstrap APIC ID.
	* @mdev: pointer to mic_device instance
	*/
	static u32 mic_x100_get_apic_id(struct mic_device *mdev)
	{
	u32 scratch2 = 0;

	scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
	return MIC_X100_SPAD2_APIC_ID(scratch2);
	}

	/**
	* mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_send_firmware_intr(struct mic_device *mdev)
	{
	u32 apicicr_low;
	u64 apic_icr_offset = MIC_X100_SBOX_APICICR7;
	int vector = MIC_X100_BSP_INTERRUPT_VECTOR;
	struct mic_mw *mw = &mdev->mmio;

	/*
	* For MIC we need to make sure we "hit"
	* the send_icr bit (13).
	*/
	apicicr_low = (vector \| (1 << 13));

	mic_mmio_write(mw, mic_x100_get_apic_id(mdev),
	MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4);

	/* Ensure that the interrupt is ordered w.r.t. previous stores. */
	wmb();
	mic_mmio_write(mw, apicicr_low,
	MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
	}

	/**
	* mic_x100_hw_reset - Reset the MIC device.
	* @mdev: pointer to mic_device instance
	*/
	static void mic_x100_hw_reset(struct mic_device *mdev)
	{
	u32 reset_reg;
	u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR;
	struct mic_mw *mw = &mdev->mmio;

	/* Ensure that the reset is ordered w.r.t. previous loads and stores */
	mb();
	/* Trigger reset */
	reset_reg = mic_mmio_read(mw, rgcr);
	reset_reg \|= 0x1;
	mic_mmio_write(mw, reset_reg, rgcr);
	/*
	* It seems we really want to delay at least 1 second
	* after touching reset to prevent a lot of problems.
	*/
	msleep(1000);
	}

	/**
	* mic_x100_load_command_line - Load command line to MIC.
	* @mdev: pointer to mic_device instance
	* @fw: the firmware image
	*
	* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
	*/
	static int
	mic_x100_load_command_line(struct mic_device mdev, const struct firmware fw)
	{
	u32 len = 0;
	u32 boot_mem;
	char *buf;
	void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size;
	#define CMDLINE_SIZE 2048

	boot_mem = mdev->aper.len >> 20;
	buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL);
	if (!buf) {
	dev_err(mdev->sdev->parent,
	"%s %d allocation failed\n", __func__, __LINE__);
	return -ENOMEM;
	}
	len += snprintf(buf, CMDLINE_SIZE - len,
	" mem=%dM", boot_mem);
	if (mdev->cmdline)
	snprintf(buf + len, CMDLINE_SIZE - len, " %s", mdev->cmdline);
	memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
	kfree(buf);
	return 0;
	}

	/**
	* mic_x100_load_ramdisk - Load ramdisk to MIC.
	* @mdev: pointer to mic_device instance
	*
	* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
	*/
	static int
	mic_x100_load_ramdisk(struct mic_device *mdev)
	{
	const struct firmware *fw;
	int rc;
	struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr;

	rc = request_firmware(&fw,
	mdev->ramdisk, mdev->sdev->parent);
	if (rc < 0) {
	dev_err(mdev->sdev->parent,
	"ramdisk request_firmware failed: %d %s\n",
	rc, mdev->ramdisk);
	goto error;
	}
	/*
	* Typically the bootaddr for card OS is 64M
	* so copy over the ramdisk @ 128M.
	*/
	memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
	iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image);
	iowrite32(fw->size, &bp->hdr.ramdisk_size);
	release_firmware(fw);
	error:
	return rc;
	}

	/**
	* mic_x100_get_boot_addr - Get MIC boot address.
	* @mdev: pointer to mic_device instance
	*
	* This function is called during firmware load to determine
	* the address at which the OS should be downloaded in card
	* memory i.e. GDDR.
	* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
	*/
	static int
	mic_x100_get_boot_addr(struct mic_device *mdev)
	{
	u32 scratch2, boot_addr;
	int rc = 0;

	scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
	boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2);
	dev_dbg(mdev->sdev->parent, "%s %d boot_addr 0x%x\n",
	__func__, __LINE__, boot_addr);
	if (boot_addr > (1 << 31)) {
	dev_err(mdev->sdev->parent,
	"incorrect bootaddr 0x%x\n",
	boot_addr);
	rc = -EINVAL;
	goto error;
	}
	mdev->bootaddr = boot_addr;
	error:
	return rc;
	}

	/**
	* mic_x100_load_firmware - Load firmware to MIC.
	* @mdev: pointer to mic_device instance
	* @buf: buffer containing boot string including firmware/ramdisk path.
	*
	* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
	*/
	static int
	mic_x100_load_firmware(struct mic_device mdev, const char buf)
	{
	int rc;
	const struct firmware *fw;

	rc = mic_x100_get_boot_addr(mdev);
	if (rc)
	goto error;
	/* load OS */
	rc = request_firmware(&fw, mdev->firmware, mdev->sdev->parent);
	if (rc < 0) {
	dev_err(mdev->sdev->parent,
	"ramdisk request_firmware failed: %d %s\n",
	rc, mdev->firmware);
	goto error;
	}
	if (mdev->bootaddr > mdev->aper.len - fw->size) {
	rc = -EINVAL;
	dev_err(mdev->sdev->parent, "%s %d rc %d bootaddr 0x%x\n",
	__func__, __LINE__, rc, mdev->bootaddr);
	release_firmware(fw);
	goto error;
	}
	memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size);
	mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size);
	if (!strcmp(mdev->bootmode, "elf"))
	goto done;
	/* load command line */
	rc = mic_x100_load_command_line(mdev, fw);
	if (rc) {
	dev_err(mdev->sdev->parent, "%s %d rc %d\n",
	__func__, __LINE__, rc);
	goto error;
	}
	release_firmware(fw);
	/* load ramdisk */
	if (mdev->ramdisk)
	rc = mic_x100_load_ramdisk(mdev);
	error:
	dev_dbg(mdev->sdev->parent, "%s %d rc %d\n", __func__, __LINE__, rc);
	done:
	return rc;
	}

	/**
	* mic_x100_get_postcode - Get postcode status from firmware.
	* @mdev: pointer to mic_device instance
	*
	* RETURNS: postcode.
	*/
	static u32 mic_x100_get_postcode(struct mic_device *mdev)
	{
	return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE);
	}

	/**
	* mic_x100_smpt_set - Update an SMPT entry with a DMA address.
	* @mdev: pointer to mic_device instance
	*
	* RETURNS: none.
	*/
	static void
	mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index)
	{
	#define SNOOP_ON (0 << 0)
	#define SNOOP_OFF (1 << 0)
	/*
	* Sbox Smpt Reg Bits:
	* Bits 31:2 Host address
	* Bits 1 RSVD
	* Bits 0 No snoop
	*/
	#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \
	(u32)(((HOST_ADDR) << 2) \| ((NO_SNOOP) & 0x01))

	uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON,
	dma_addr >> mdev->smpt->info.page_shift);
	mic_mmio_write(&mdev->mmio, smpt_reg_val,
	MIC_X100_SBOX_BASE_ADDRESS +
	MIC_X100_SBOX_SMPT00 + (4 * index));
	}

	/**
	* mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields.
	* @mdev: pointer to mic_device instance
	*
	* RETURNS: none.
	*/
	static void mic_x100_smpt_hw_init(struct mic_device *mdev)
	{
	struct mic_smpt_hw_info *info = &mdev->smpt->info;

	info->num_reg = 32;
	info->page_shift = 34;
	info->page_size = (1ULL << info->page_shift);
	info->base = 0x8000000000ULL;
	}

	struct mic_smpt_ops mic_x100_smpt_ops = {
	.init = mic_x100_smpt_hw_init,
	.set = mic_x100_smpt_set,
	};

	struct mic_hw_ops mic_x100_ops = {
	.aper_bar = MIC_X100_APER_BAR,
	.mmio_bar = MIC_X100_MMIO_BAR,
	.read_spad = mic_x100_read_spad,
	.write_spad = mic_x100_write_spad,
	.send_intr = mic_x100_send_intr,
	.ack_interrupt = mic_x100_ack_interrupt,
	.intr_workarounds = mic_x100_intr_workarounds,
	.reset = mic_x100_hw_reset,
	.reset_fw_ready = mic_x100_reset_fw_ready,
	.is_fw_ready = mic_x100_is_fw_ready,
	.send_firmware_intr = mic_x100_send_firmware_intr,
	.load_mic_fw = mic_x100_load_firmware,
	.get_postcode = mic_x100_get_postcode,
	};

	struct mic_hw_intr_ops mic_x100_intr_ops = {
	.intr_init = mic_x100_hw_intr_init,
	.enable_interrupts = mic_x100_enable_interrupts,
	.disable_interrupts = mic_x100_disable_interrupts,
	.program_msi_to_src_map = mic_x100_program_msi_to_src_map,
	.read_msi_to_src_map = mic_x100_read_msi_to_src_map,
	};