| /* |
| * mc13xxx.h - regulators for the Freescale mc13xxx PMIC |
| * |
| * Copyright (C) 2010 Yong Shen <yong.shen@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #ifndef __LINUX_REGULATOR_MC13XXX_H |
| #define __LINUX_REGULATOR_MC13XXX_H |
| |
| #include <linux/regulator/driver.h> |
| |
| struct mc13xxx_regulator { |
| struct regulator_desc desc; |
| int reg; |
| int enable_bit; |
| int vsel_reg; |
| int vsel_shift; |
| int vsel_mask; |
| int hi_bit; |
| }; |
| |
| struct mc13xxx_regulator_priv { |
| struct mc13xxx *mc13xxx; |
| u32 powermisc_pwgt_state; |
| struct mc13xxx_regulator *mc13xxx_regulators; |
| int num_regulators; |
| struct regulator_dev *regulators[]; |
| }; |
| |
| extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *selector); |
| |
| #ifdef CONFIG_OF |
| extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev); |
| extern struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( |
| struct platform_device *pdev, struct mc13xxx_regulator *regulators, |
| int num_regulators); |
| #else |
| static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) |
| { |
| return -ENODEV; |
| } |
| |
| static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( |
| struct platform_device *pdev, struct mc13xxx_regulator *regulators, |
| int num_regulators) |
| { |
| return NULL; |
| } |
| #endif |
| |
| extern struct regulator_ops mc13xxx_regulator_ops; |
| extern struct regulator_ops mc13xxx_fixed_regulator_ops; |
| |
| #define MC13xxx_DEFINE(prefix, _name, _reg, _vsel_reg, _voltages, _ops) \ |
| [prefix ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ARRAY_SIZE(_voltages), \ |
| .volt_table = _voltages, \ |
| .ops = &_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = prefix ## _name, \ |
| .owner = THIS_MODULE, \ |
| }, \ |
| .reg = prefix ## _reg, \ |
| .enable_bit = prefix ## _reg ## _ ## _name ## EN, \ |
| .vsel_reg = prefix ## _vsel_reg, \ |
| .vsel_shift = prefix ## _vsel_reg ## _ ## _name ## VSEL,\ |
| .vsel_mask = prefix ## _vsel_reg ## _ ## _name ## VSEL_M,\ |
| } |
| |
| #define MC13xxx_FIXED_DEFINE(prefix, _name, _reg, _voltages, _ops) \ |
| [prefix ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ARRAY_SIZE(_voltages), \ |
| .volt_table = _voltages, \ |
| .ops = &_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = prefix ## _name, \ |
| .owner = THIS_MODULE, \ |
| }, \ |
| .reg = prefix ## _reg, \ |
| .enable_bit = prefix ## _reg ## _ ## _name ## EN, \ |
| } |
| |
| #define MC13xxx_GPO_DEFINE(prefix, _name, _reg, _voltages, _ops) \ |
| [prefix ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ARRAY_SIZE(_voltages), \ |
| .volt_table = _voltages, \ |
| .ops = &_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = prefix ## _name, \ |
| .owner = THIS_MODULE, \ |
| }, \ |
| .reg = prefix ## _reg, \ |
| .enable_bit = prefix ## _reg ## _ ## _name ## EN, \ |
| } |
| |
| #define MC13xxx_DEFINE_SW(_name, _reg, _vsel_reg, _voltages, ops) \ |
| MC13xxx_DEFINE(SW, _name, _reg, _vsel_reg, _voltages, ops) |
| #define MC13xxx_DEFINE_REGU(_name, _reg, _vsel_reg, _voltages, ops) \ |
| MC13xxx_DEFINE(REGU, _name, _reg, _vsel_reg, _voltages, ops) |
| |
| #endif |