| /* |
| * LSI/Engenio/NetApp E-Series RDAC SCSI Device Handler |
| * |
| * Copyright (C) 2005 Mike Christie. All rights reserved. |
| * Copyright (C) Chandra Seetharaman, IBM Corp. 2007 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| */ |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_dh.h> |
| #include <linux/workqueue.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| #define RDAC_NAME "rdac" |
| #define RDAC_RETRY_COUNT 5 |
| |
| /* |
| * LSI mode page stuff |
| * |
| * These struct definitions and the forming of the |
| * mode page were taken from the LSI RDAC 2.4 GPL'd |
| * driver, and then converted to Linux conventions. |
| */ |
| #define RDAC_QUIESCENCE_TIME 20 |
| /* |
| * Page Codes |
| */ |
| #define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c |
| |
| /* |
| * Controller modes definitions |
| */ |
| #define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02 |
| |
| /* |
| * RDAC Options field |
| */ |
| #define RDAC_FORCED_QUIESENCE 0x02 |
| |
| #define RDAC_TIMEOUT (60 * HZ) |
| #define RDAC_RETRIES 3 |
| |
| struct rdac_mode_6_hdr { |
| u8 data_len; |
| u8 medium_type; |
| u8 device_params; |
| u8 block_desc_len; |
| }; |
| |
| struct rdac_mode_10_hdr { |
| u16 data_len; |
| u8 medium_type; |
| u8 device_params; |
| u16 reserved; |
| u16 block_desc_len; |
| }; |
| |
| struct rdac_mode_common { |
| u8 controller_serial[16]; |
| u8 alt_controller_serial[16]; |
| u8 rdac_mode[2]; |
| u8 alt_rdac_mode[2]; |
| u8 quiescence_timeout; |
| u8 rdac_options; |
| }; |
| |
| struct rdac_pg_legacy { |
| struct rdac_mode_6_hdr hdr; |
| u8 page_code; |
| u8 page_len; |
| struct rdac_mode_common common; |
| #define MODE6_MAX_LUN 32 |
| u8 lun_table[MODE6_MAX_LUN]; |
| u8 reserved2[32]; |
| u8 reserved3; |
| u8 reserved4; |
| }; |
| |
| struct rdac_pg_expanded { |
| struct rdac_mode_10_hdr hdr; |
| u8 page_code; |
| u8 subpage_code; |
| u8 page_len[2]; |
| struct rdac_mode_common common; |
| u8 lun_table[256]; |
| u8 reserved3; |
| u8 reserved4; |
| }; |
| |
| struct c9_inquiry { |
| u8 peripheral_info; |
| u8 page_code; /* 0xC9 */ |
| u8 reserved1; |
| u8 page_len; |
| u8 page_id[4]; /* "vace" */ |
| u8 avte_cvp; |
| u8 path_prio; |
| u8 reserved2[38]; |
| }; |
| |
| #define SUBSYS_ID_LEN 16 |
| #define SLOT_ID_LEN 2 |
| #define ARRAY_LABEL_LEN 31 |
| |
| struct c4_inquiry { |
| u8 peripheral_info; |
| u8 page_code; /* 0xC4 */ |
| u8 reserved1; |
| u8 page_len; |
| u8 page_id[4]; /* "subs" */ |
| u8 subsys_id[SUBSYS_ID_LEN]; |
| u8 revision[4]; |
| u8 slot_id[SLOT_ID_LEN]; |
| u8 reserved[2]; |
| }; |
| |
| #define UNIQUE_ID_LEN 16 |
| struct c8_inquiry { |
| u8 peripheral_info; |
| u8 page_code; /* 0xC8 */ |
| u8 reserved1; |
| u8 page_len; |
| u8 page_id[4]; /* "edid" */ |
| u8 reserved2[3]; |
| u8 vol_uniq_id_len; |
| u8 vol_uniq_id[16]; |
| u8 vol_user_label_len; |
| u8 vol_user_label[60]; |
| u8 array_uniq_id_len; |
| u8 array_unique_id[UNIQUE_ID_LEN]; |
| u8 array_user_label_len; |
| u8 array_user_label[60]; |
| u8 lun[8]; |
| }; |
| |
| struct rdac_controller { |
| u8 array_id[UNIQUE_ID_LEN]; |
| int use_ms10; |
| struct kref kref; |
| struct list_head node; /* list of all controllers */ |
| union { |
| struct rdac_pg_legacy legacy; |
| struct rdac_pg_expanded expanded; |
| } mode_select; |
| u8 index; |
| u8 array_name[ARRAY_LABEL_LEN]; |
| struct Scsi_Host *host; |
| spinlock_t ms_lock; |
| int ms_queued; |
| struct work_struct ms_work; |
| struct scsi_device *ms_sdev; |
| struct list_head ms_head; |
| }; |
| |
| struct c2_inquiry { |
| u8 peripheral_info; |
| u8 page_code; /* 0xC2 */ |
| u8 reserved1; |
| u8 page_len; |
| u8 page_id[4]; /* "swr4" */ |
| u8 sw_version[3]; |
| u8 sw_date[3]; |
| u8 features_enabled; |
| u8 max_lun_supported; |
| u8 partitions[239]; /* Total allocation length should be 0xFF */ |
| }; |
| |
| struct rdac_dh_data { |
| struct rdac_controller *ctlr; |
| #define UNINITIALIZED_LUN (1 << 8) |
| unsigned lun; |
| |
| #define RDAC_MODE 0 |
| #define RDAC_MODE_AVT 1 |
| #define RDAC_MODE_IOSHIP 2 |
| unsigned char mode; |
| |
| #define RDAC_STATE_ACTIVE 0 |
| #define RDAC_STATE_PASSIVE 1 |
| unsigned char state; |
| |
| #define RDAC_LUN_UNOWNED 0 |
| #define RDAC_LUN_OWNED 1 |
| char lun_state; |
| |
| #define RDAC_PREFERRED 0 |
| #define RDAC_NON_PREFERRED 1 |
| char preferred; |
| |
| unsigned char sense[SCSI_SENSE_BUFFERSIZE]; |
| union { |
| struct c2_inquiry c2; |
| struct c4_inquiry c4; |
| struct c8_inquiry c8; |
| struct c9_inquiry c9; |
| } inq; |
| }; |
| |
| static const char *mode[] = { |
| "RDAC", |
| "AVT", |
| "IOSHIP", |
| }; |
| static const char *lun_state[] = |
| { |
| "unowned", |
| "owned", |
| }; |
| |
| struct rdac_queue_data { |
| struct list_head entry; |
| struct rdac_dh_data *h; |
| activate_complete callback_fn; |
| void *callback_data; |
| }; |
| |
| static LIST_HEAD(ctlr_list); |
| static DEFINE_SPINLOCK(list_lock); |
| static struct workqueue_struct *kmpath_rdacd; |
| static void send_mode_select(struct work_struct *work); |
| |
| /* |
| * module parameter to enable rdac debug logging. |
| * 2 bits for each type of logging, only two types defined for now |
| * Can be enhanced if required at later point |
| */ |
| static int rdac_logging = 1; |
| module_param(rdac_logging, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, " |
| "Default is 1 - failover logging enabled, " |
| "set it to 0xF to enable all the logs"); |
| |
| #define RDAC_LOG_FAILOVER 0 |
| #define RDAC_LOG_SENSE 2 |
| |
| #define RDAC_LOG_BITS 2 |
| |
| #define RDAC_LOG_LEVEL(SHIFT) \ |
| ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1)) |
| |
| #define RDAC_LOG(SHIFT, sdev, f, arg...) \ |
| do { \ |
| if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \ |
| sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \ |
| } while (0); |
| |
| static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev) |
| { |
| struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; |
| BUG_ON(scsi_dh_data == NULL); |
| return ((struct rdac_dh_data *) scsi_dh_data->buf); |
| } |
| |
| static struct request *get_rdac_req(struct scsi_device *sdev, |
| void *buffer, unsigned buflen, int rw) |
| { |
| struct request *rq; |
| struct request_queue *q = sdev->request_queue; |
| |
| rq = blk_get_request(q, rw, GFP_NOIO); |
| |
| if (!rq) { |
| sdev_printk(KERN_INFO, sdev, |
| "get_rdac_req: blk_get_request failed.\n"); |
| return NULL; |
| } |
| blk_rq_set_block_pc(rq); |
| |
| if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) { |
| blk_put_request(rq); |
| sdev_printk(KERN_INFO, sdev, |
| "get_rdac_req: blk_rq_map_kern failed.\n"); |
| return NULL; |
| } |
| |
| rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | |
| REQ_FAILFAST_DRIVER; |
| rq->retries = RDAC_RETRIES; |
| rq->timeout = RDAC_TIMEOUT; |
| |
| return rq; |
| } |
| |
| static struct request *rdac_failover_get(struct scsi_device *sdev, |
| struct rdac_dh_data *h, struct list_head *list) |
| { |
| struct request *rq; |
| struct rdac_mode_common *common; |
| unsigned data_size; |
| struct rdac_queue_data *qdata; |
| u8 *lun_table; |
| |
| if (h->ctlr->use_ms10) { |
| struct rdac_pg_expanded *rdac_pg; |
| |
| data_size = sizeof(struct rdac_pg_expanded); |
| rdac_pg = &h->ctlr->mode_select.expanded; |
| memset(rdac_pg, 0, data_size); |
| common = &rdac_pg->common; |
| rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; |
| rdac_pg->subpage_code = 0x1; |
| rdac_pg->page_len[0] = 0x01; |
| rdac_pg->page_len[1] = 0x28; |
| lun_table = rdac_pg->lun_table; |
| } else { |
| struct rdac_pg_legacy *rdac_pg; |
| |
| data_size = sizeof(struct rdac_pg_legacy); |
| rdac_pg = &h->ctlr->mode_select.legacy; |
| memset(rdac_pg, 0, data_size); |
| common = &rdac_pg->common; |
| rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; |
| rdac_pg->page_len = 0x68; |
| lun_table = rdac_pg->lun_table; |
| } |
| common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; |
| common->quiescence_timeout = RDAC_QUIESCENCE_TIME; |
| common->rdac_options = RDAC_FORCED_QUIESENCE; |
| |
| list_for_each_entry(qdata, list, entry) { |
| lun_table[qdata->h->lun] = 0x81; |
| } |
| |
| /* get request for block layer packet command */ |
| rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE); |
| if (!rq) |
| return NULL; |
| |
| /* Prepare the command. */ |
| if (h->ctlr->use_ms10) { |
| rq->cmd[0] = MODE_SELECT_10; |
| rq->cmd[7] = data_size >> 8; |
| rq->cmd[8] = data_size & 0xff; |
| } else { |
| rq->cmd[0] = MODE_SELECT; |
| rq->cmd[4] = data_size; |
| } |
| rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); |
| |
| rq->sense = h->sense; |
| memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); |
| rq->sense_len = 0; |
| |
| return rq; |
| } |
| |
| static void release_controller(struct kref *kref) |
| { |
| struct rdac_controller *ctlr; |
| ctlr = container_of(kref, struct rdac_controller, kref); |
| |
| list_del(&ctlr->node); |
| kfree(ctlr); |
| } |
| |
| static struct rdac_controller *get_controller(int index, char *array_name, |
| u8 *array_id, struct scsi_device *sdev) |
| { |
| struct rdac_controller *ctlr, *tmp; |
| |
| list_for_each_entry(tmp, &ctlr_list, node) { |
| if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) && |
| (tmp->index == index) && |
| (tmp->host == sdev->host)) { |
| kref_get(&tmp->kref); |
| return tmp; |
| } |
| } |
| ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); |
| if (!ctlr) |
| return NULL; |
| |
| /* initialize fields of controller */ |
| memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN); |
| ctlr->index = index; |
| ctlr->host = sdev->host; |
| memcpy(ctlr->array_name, array_name, ARRAY_LABEL_LEN); |
| |
| kref_init(&ctlr->kref); |
| ctlr->use_ms10 = -1; |
| ctlr->ms_queued = 0; |
| ctlr->ms_sdev = NULL; |
| spin_lock_init(&ctlr->ms_lock); |
| INIT_WORK(&ctlr->ms_work, send_mode_select); |
| INIT_LIST_HEAD(&ctlr->ms_head); |
| list_add(&ctlr->node, &ctlr_list); |
| |
| return ctlr; |
| } |
| |
| static int submit_inquiry(struct scsi_device *sdev, int page_code, |
| unsigned int len, struct rdac_dh_data *h) |
| { |
| struct request *rq; |
| struct request_queue *q = sdev->request_queue; |
| int err = SCSI_DH_RES_TEMP_UNAVAIL; |
| |
| rq = get_rdac_req(sdev, &h->inq, len, READ); |
| if (!rq) |
| goto done; |
| |
| /* Prepare the command. */ |
| rq->cmd[0] = INQUIRY; |
| rq->cmd[1] = 1; |
| rq->cmd[2] = page_code; |
| rq->cmd[4] = len; |
| rq->cmd_len = COMMAND_SIZE(INQUIRY); |
| |
| rq->sense = h->sense; |
| memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); |
| rq->sense_len = 0; |
| |
| err = blk_execute_rq(q, NULL, rq, 1); |
| if (err == -EIO) |
| err = SCSI_DH_IO; |
| |
| blk_put_request(rq); |
| done: |
| return err; |
| } |
| |
| static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h, |
| char *array_name, u8 *array_id) |
| { |
| int err, i; |
| struct c8_inquiry *inqp; |
| |
| err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h); |
| if (err == SCSI_DH_OK) { |
| inqp = &h->inq.c8; |
| if (inqp->page_code != 0xc8) |
| return SCSI_DH_NOSYS; |
| if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' || |
| inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd') |
| return SCSI_DH_NOSYS; |
| h->lun = inqp->lun[7]; /* Uses only the last byte */ |
| |
| for(i=0; i<ARRAY_LABEL_LEN-1; ++i) |
| *(array_name+i) = inqp->array_user_label[(2*i)+1]; |
| |
| *(array_name+ARRAY_LABEL_LEN-1) = '\0'; |
| memset(array_id, 0, UNIQUE_ID_LEN); |
| memcpy(array_id, inqp->array_unique_id, inqp->array_uniq_id_len); |
| } |
| return err; |
| } |
| |
| static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h) |
| { |
| int err; |
| struct c9_inquiry *inqp; |
| |
| h->state = RDAC_STATE_ACTIVE; |
| err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h); |
| if (err == SCSI_DH_OK) { |
| inqp = &h->inq.c9; |
| /* detect the operating mode */ |
| if ((inqp->avte_cvp >> 5) & 0x1) |
| h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */ |
| else if (inqp->avte_cvp >> 7) |
| h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */ |
| else |
| h->mode = RDAC_MODE; /* LUN in RDAC mode */ |
| |
| /* Update ownership */ |
| if (inqp->avte_cvp & 0x1) |
| h->lun_state = RDAC_LUN_OWNED; |
| else { |
| h->lun_state = RDAC_LUN_UNOWNED; |
| if (h->mode == RDAC_MODE) |
| h->state = RDAC_STATE_PASSIVE; |
| } |
| |
| /* Update path prio*/ |
| if (inqp->path_prio & 0x1) |
| h->preferred = RDAC_PREFERRED; |
| else |
| h->preferred = RDAC_NON_PREFERRED; |
| } |
| |
| return err; |
| } |
| |
| static int initialize_controller(struct scsi_device *sdev, |
| struct rdac_dh_data *h, char *array_name, u8 *array_id) |
| { |
| int err, index; |
| struct c4_inquiry *inqp; |
| |
| err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h); |
| if (err == SCSI_DH_OK) { |
| inqp = &h->inq.c4; |
| /* get the controller index */ |
| if (inqp->slot_id[1] == 0x31) |
| index = 0; |
| else |
| index = 1; |
| |
| spin_lock(&list_lock); |
| h->ctlr = get_controller(index, array_name, array_id, sdev); |
| if (!h->ctlr) |
| err = SCSI_DH_RES_TEMP_UNAVAIL; |
| spin_unlock(&list_lock); |
| } |
| return err; |
| } |
| |
| static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h) |
| { |
| int err; |
| struct c2_inquiry *inqp; |
| |
| err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h); |
| if (err == SCSI_DH_OK) { |
| inqp = &h->inq.c2; |
| /* |
| * If more than MODE6_MAX_LUN luns are supported, use |
| * mode select 10 |
| */ |
| if (inqp->max_lun_supported >= MODE6_MAX_LUN) |
| h->ctlr->use_ms10 = 1; |
| else |
| h->ctlr->use_ms10 = 0; |
| } |
| return err; |
| } |
| |
| static int mode_select_handle_sense(struct scsi_device *sdev, |
| unsigned char *sensebuf) |
| { |
| struct scsi_sense_hdr sense_hdr; |
| int err = SCSI_DH_IO, ret; |
| struct rdac_dh_data *h = get_rdac_data(sdev); |
| |
| ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr); |
| if (!ret) |
| goto done; |
| |
| switch (sense_hdr.sense_key) { |
| case NO_SENSE: |
| case ABORTED_COMMAND: |
| case UNIT_ATTENTION: |
| err = SCSI_DH_RETRY; |
| break; |
| case NOT_READY: |
| if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01) |
| /* LUN Not Ready and is in the Process of Becoming |
| * Ready |
| */ |
| err = SCSI_DH_RETRY; |
| break; |
| case ILLEGAL_REQUEST: |
| if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36) |
| /* |
| * Command Lock contention |
| */ |
| err = SCSI_DH_RETRY; |
| break; |
| default: |
| break; |
| } |
| |
| RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " |
| "MODE_SELECT returned with sense %02x/%02x/%02x", |
| (char *) h->ctlr->array_name, h->ctlr->index, |
| sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq); |
| |
| done: |
| return err; |
| } |
| |
| static void send_mode_select(struct work_struct *work) |
| { |
| struct rdac_controller *ctlr = |
| container_of(work, struct rdac_controller, ms_work); |
| struct request *rq; |
| struct scsi_device *sdev = ctlr->ms_sdev; |
| struct rdac_dh_data *h = get_rdac_data(sdev); |
| struct request_queue *q = sdev->request_queue; |
| int err, retry_cnt = RDAC_RETRY_COUNT; |
| struct rdac_queue_data *tmp, *qdata; |
| LIST_HEAD(list); |
| |
| spin_lock(&ctlr->ms_lock); |
| list_splice_init(&ctlr->ms_head, &list); |
| ctlr->ms_queued = 0; |
| ctlr->ms_sdev = NULL; |
| spin_unlock(&ctlr->ms_lock); |
| |
| retry: |
| err = SCSI_DH_RES_TEMP_UNAVAIL; |
| rq = rdac_failover_get(sdev, h, &list); |
| if (!rq) |
| goto done; |
| |
| RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " |
| "%s MODE_SELECT command", |
| (char *) h->ctlr->array_name, h->ctlr->index, |
| (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying"); |
| |
| err = blk_execute_rq(q, NULL, rq, 1); |
| blk_put_request(rq); |
| if (err != SCSI_DH_OK) { |
| err = mode_select_handle_sense(sdev, h->sense); |
| if (err == SCSI_DH_RETRY && retry_cnt--) |
| goto retry; |
| } |
| if (err == SCSI_DH_OK) { |
| h->state = RDAC_STATE_ACTIVE; |
| RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " |
| "MODE_SELECT completed", |
| (char *) h->ctlr->array_name, h->ctlr->index); |
| } |
| |
| done: |
| list_for_each_entry_safe(qdata, tmp, &list, entry) { |
| list_del(&qdata->entry); |
| if (err == SCSI_DH_OK) |
| qdata->h->state = RDAC_STATE_ACTIVE; |
| if (qdata->callback_fn) |
| qdata->callback_fn(qdata->callback_data, err); |
| kfree(qdata); |
| } |
| return; |
| } |
| |
| static int queue_mode_select(struct scsi_device *sdev, |
| activate_complete fn, void *data) |
| { |
| struct rdac_queue_data *qdata; |
| struct rdac_controller *ctlr; |
| |
| qdata = kzalloc(sizeof(*qdata), GFP_KERNEL); |
| if (!qdata) |
| return SCSI_DH_RETRY; |
| |
| qdata->h = get_rdac_data(sdev); |
| qdata->callback_fn = fn; |
| qdata->callback_data = data; |
| |
| ctlr = qdata->h->ctlr; |
| spin_lock(&ctlr->ms_lock); |
| list_add_tail(&qdata->entry, &ctlr->ms_head); |
| if (!ctlr->ms_queued) { |
| ctlr->ms_queued = 1; |
| ctlr->ms_sdev = sdev; |
| queue_work(kmpath_rdacd, &ctlr->ms_work); |
| } |
| spin_unlock(&ctlr->ms_lock); |
| return SCSI_DH_OK; |
| } |
| |
| static int rdac_activate(struct scsi_device *sdev, |
| activate_complete fn, void *data) |
| { |
| struct rdac_dh_data *h = get_rdac_data(sdev); |
| int err = SCSI_DH_OK; |
| int act = 0; |
| |
| err = check_ownership(sdev, h); |
| if (err != SCSI_DH_OK) |
| goto done; |
| |
| switch (h->mode) { |
| case RDAC_MODE: |
| if (h->lun_state == RDAC_LUN_UNOWNED) |
| act = 1; |
| break; |
| case RDAC_MODE_IOSHIP: |
| if ((h->lun_state == RDAC_LUN_UNOWNED) && |
| (h->preferred == RDAC_PREFERRED)) |
| act = 1; |
| break; |
| default: |
| break; |
| } |
| |
| if (act) { |
| err = queue_mode_select(sdev, fn, data); |
| if (err == SCSI_DH_OK) |
| return 0; |
| } |
| done: |
| if (fn) |
| fn(data, err); |
| return 0; |
| } |
| |
| static int rdac_prep_fn(struct scsi_device *sdev, struct request *req) |
| { |
| struct rdac_dh_data *h = get_rdac_data(sdev); |
| int ret = BLKPREP_OK; |
| |
| if (h->state != RDAC_STATE_ACTIVE) { |
| ret = BLKPREP_KILL; |
| req->cmd_flags |= REQ_QUIET; |
| } |
| return ret; |
| |
| } |
| |
| static int rdac_check_sense(struct scsi_device *sdev, |
| struct scsi_sense_hdr *sense_hdr) |
| { |
| struct rdac_dh_data *h = get_rdac_data(sdev); |
| |
| RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, " |
| "I/O returned with sense %02x/%02x/%02x", |
| (char *) h->ctlr->array_name, h->ctlr->index, |
| sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq); |
| |
| switch (sense_hdr->sense_key) { |
| case NOT_READY: |
| if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01) |
| /* LUN Not Ready - Logical Unit Not Ready and is in |
| * the process of becoming ready |
| * Just retry. |
| */ |
| return ADD_TO_MLQUEUE; |
| if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81) |
| /* LUN Not Ready - Storage firmware incompatible |
| * Manual code synchonisation required. |
| * |
| * Nothing we can do here. Try to bypass the path. |
| */ |
| return SUCCESS; |
| if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1) |
| /* LUN Not Ready - Quiescense in progress |
| * |
| * Just retry and wait. |
| */ |
| return ADD_TO_MLQUEUE; |
| if (sense_hdr->asc == 0xA1 && sense_hdr->ascq == 0x02) |
| /* LUN Not Ready - Quiescense in progress |
| * or has been achieved |
| * Just retry. |
| */ |
| return ADD_TO_MLQUEUE; |
| break; |
| case ILLEGAL_REQUEST: |
| if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { |
| /* Invalid Request - Current Logical Unit Ownership. |
| * Controller is not the current owner of the LUN, |
| * Fail the path, so that the other path be used. |
| */ |
| h->state = RDAC_STATE_PASSIVE; |
| return SUCCESS; |
| } |
| break; |
| case UNIT_ATTENTION: |
| if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) |
| /* |
| * Power On, Reset, or Bus Device Reset, just retry. |
| */ |
| return ADD_TO_MLQUEUE; |
| if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02) |
| /* |
| * Quiescence in progress , just retry. |
| */ |
| return ADD_TO_MLQUEUE; |
| break; |
| } |
| /* success just means we do not care what scsi-ml does */ |
| return SCSI_RETURN_NOT_HANDLED; |
| } |
| |
| static const struct scsi_dh_devlist rdac_dev_list[] = { |
| {"IBM", "1722"}, |
| {"IBM", "1724"}, |
| {"IBM", "1726"}, |
| {"IBM", "1742"}, |
| {"IBM", "1745"}, |
| {"IBM", "1746"}, |
| {"IBM", "1813"}, |
| {"IBM", "1814"}, |
| {"IBM", "1815"}, |
| {"IBM", "1818"}, |
| {"IBM", "3526"}, |
| {"SGI", "TP9"}, |
| {"SGI", "IS"}, |
| {"STK", "OPENstorage D280"}, |
| {"STK", "FLEXLINE 380"}, |
| {"SUN", "CSM"}, |
| {"SUN", "LCSM100"}, |
| {"SUN", "STK6580_6780"}, |
| {"SUN", "SUN_6180"}, |
| {"SUN", "ArrayStorage"}, |
| {"DELL", "MD3"}, |
| {"NETAPP", "INF-01-00"}, |
| {"LSI", "INF-01-00"}, |
| {"ENGENIO", "INF-01-00"}, |
| {NULL, NULL}, |
| }; |
| |
| static bool rdac_match(struct scsi_device *sdev) |
| { |
| int i; |
| |
| if (scsi_device_tpgs(sdev)) |
| return false; |
| |
| for (i = 0; rdac_dev_list[i].vendor; i++) { |
| if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor, |
| strlen(rdac_dev_list[i].vendor)) && |
| !strncmp(sdev->model, rdac_dev_list[i].model, |
| strlen(rdac_dev_list[i].model))) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static int rdac_bus_attach(struct scsi_device *sdev); |
| static void rdac_bus_detach(struct scsi_device *sdev); |
| |
| static struct scsi_device_handler rdac_dh = { |
| .name = RDAC_NAME, |
| .module = THIS_MODULE, |
| .devlist = rdac_dev_list, |
| .prep_fn = rdac_prep_fn, |
| .check_sense = rdac_check_sense, |
| .attach = rdac_bus_attach, |
| .detach = rdac_bus_detach, |
| .activate = rdac_activate, |
| .match = rdac_match, |
| }; |
| |
| static int rdac_bus_attach(struct scsi_device *sdev) |
| { |
| struct scsi_dh_data *scsi_dh_data; |
| struct rdac_dh_data *h; |
| unsigned long flags; |
| int err; |
| char array_name[ARRAY_LABEL_LEN]; |
| char array_id[UNIQUE_ID_LEN]; |
| |
| scsi_dh_data = kzalloc(sizeof(*scsi_dh_data) |
| + sizeof(*h) , GFP_KERNEL); |
| if (!scsi_dh_data) { |
| sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n", |
| RDAC_NAME); |
| return -ENOMEM; |
| } |
| |
| scsi_dh_data->scsi_dh = &rdac_dh; |
| h = (struct rdac_dh_data *) scsi_dh_data->buf; |
| h->lun = UNINITIALIZED_LUN; |
| h->state = RDAC_STATE_ACTIVE; |
| |
| err = get_lun_info(sdev, h, array_name, array_id); |
| if (err != SCSI_DH_OK) |
| goto failed; |
| |
| err = initialize_controller(sdev, h, array_name, array_id); |
| if (err != SCSI_DH_OK) |
| goto failed; |
| |
| err = check_ownership(sdev, h); |
| if (err != SCSI_DH_OK) |
| goto clean_ctlr; |
| |
| err = set_mode_select(sdev, h); |
| if (err != SCSI_DH_OK) |
| goto clean_ctlr; |
| |
| if (!try_module_get(THIS_MODULE)) |
| goto clean_ctlr; |
| |
| spin_lock_irqsave(sdev->request_queue->queue_lock, flags); |
| sdev->scsi_dh_data = scsi_dh_data; |
| spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); |
| |
| sdev_printk(KERN_NOTICE, sdev, |
| "%s: LUN %d (%s) (%s)\n", |
| RDAC_NAME, h->lun, mode[(int)h->mode], |
| lun_state[(int)h->lun_state]); |
| |
| return 0; |
| |
| clean_ctlr: |
| spin_lock(&list_lock); |
| kref_put(&h->ctlr->kref, release_controller); |
| spin_unlock(&list_lock); |
| |
| failed: |
| kfree(scsi_dh_data); |
| sdev_printk(KERN_ERR, sdev, "%s: not attached\n", |
| RDAC_NAME); |
| return -EINVAL; |
| } |
| |
| static void rdac_bus_detach( struct scsi_device *sdev ) |
| { |
| struct scsi_dh_data *scsi_dh_data; |
| struct rdac_dh_data *h; |
| unsigned long flags; |
| |
| scsi_dh_data = sdev->scsi_dh_data; |
| h = (struct rdac_dh_data *) scsi_dh_data->buf; |
| if (h->ctlr && h->ctlr->ms_queued) |
| flush_workqueue(kmpath_rdacd); |
| |
| spin_lock_irqsave(sdev->request_queue->queue_lock, flags); |
| sdev->scsi_dh_data = NULL; |
| spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); |
| |
| spin_lock(&list_lock); |
| if (h->ctlr) |
| kref_put(&h->ctlr->kref, release_controller); |
| spin_unlock(&list_lock); |
| kfree(scsi_dh_data); |
| module_put(THIS_MODULE); |
| sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME); |
| } |
| |
| |
| |
| static int __init rdac_init(void) |
| { |
| int r; |
| |
| r = scsi_register_device_handler(&rdac_dh); |
| if (r != 0) { |
| printk(KERN_ERR "Failed to register scsi device handler."); |
| goto done; |
| } |
| |
| /* |
| * Create workqueue to handle mode selects for rdac |
| */ |
| kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd"); |
| if (!kmpath_rdacd) { |
| scsi_unregister_device_handler(&rdac_dh); |
| printk(KERN_ERR "kmpath_rdacd creation failed.\n"); |
| |
| r = -EINVAL; |
| } |
| done: |
| return r; |
| } |
| |
| static void __exit rdac_exit(void) |
| { |
| destroy_workqueue(kmpath_rdacd); |
| scsi_unregister_device_handler(&rdac_dh); |
| } |
| |
| module_init(rdac_init); |
| module_exit(rdac_exit); |
| |
| MODULE_DESCRIPTION("Multipath LSI/Engenio/NetApp E-Series RDAC driver"); |
| MODULE_AUTHOR("Mike Christie, Chandra Seetharaman"); |
| MODULE_VERSION("01.00.0000.0000"); |
| MODULE_LICENSE("GPL"); |