| /* |
| * x86_pkg_temp_thermal driver |
| * Copyright (c) 2013, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc. |
| * |
| */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/param.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/cpu.h> |
| #include <linux/smp.h> |
| #include <linux/slab.h> |
| #include <linux/pm.h> |
| #include <linux/thermal.h> |
| #include <linux/debugfs.h> |
| #include <asm/cpu_device_id.h> |
| #include <asm/mce.h> |
| |
| /* |
| * Rate control delay: Idea is to introduce denounce effect |
| * This should be long enough to avoid reduce events, when |
| * threshold is set to a temperature, which is constantly |
| * violated, but at the short enough to take any action. |
| * The action can be remove threshold or change it to next |
| * interesting setting. Based on experiments, in around |
| * every 5 seconds under load will give us a significant |
| * temperature change. |
| */ |
| #define PKG_TEMP_THERMAL_NOTIFY_DELAY 5000 |
| static int notify_delay_ms = PKG_TEMP_THERMAL_NOTIFY_DELAY; |
| module_param(notify_delay_ms, int, 0644); |
| MODULE_PARM_DESC(notify_delay_ms, |
| "User space notification delay in milli seconds."); |
| |
| /* Number of trip points in thermal zone. Currently it can't |
| * be more than 2. MSR can allow setting and getting notifications |
| * for only 2 thresholds. This define enforces this, if there |
| * is some wrong values returned by cpuid for number of thresholds. |
| */ |
| #define MAX_NUMBER_OF_TRIPS 2 |
| /* Limit number of package temp zones */ |
| #define MAX_PKG_TEMP_ZONE_IDS 256 |
| |
| struct phy_dev_entry { |
| struct list_head list; |
| u16 phys_proc_id; |
| u16 first_cpu; |
| u32 tj_max; |
| int ref_cnt; |
| u32 start_pkg_therm_low; |
| u32 start_pkg_therm_high; |
| struct thermal_zone_device *tzone; |
| }; |
| |
| static const struct thermal_zone_params pkg_temp_tz_params = { |
| .no_hwmon = true, |
| }; |
| |
| /* List maintaining number of package instances */ |
| static LIST_HEAD(phy_dev_list); |
| static DEFINE_MUTEX(phy_dev_list_mutex); |
| |
| /* Interrupt to work function schedule queue */ |
| static DEFINE_PER_CPU(struct delayed_work, pkg_temp_thermal_threshold_work); |
| |
| /* To track if the work is already scheduled on a package */ |
| static u8 *pkg_work_scheduled; |
| |
| /* Spin lock to prevent races with pkg_work_scheduled */ |
| static spinlock_t pkg_work_lock; |
| static u16 max_phy_id; |
| |
| /* Debug counters to show using debugfs */ |
| static struct dentry *debugfs; |
| static unsigned int pkg_interrupt_cnt; |
| static unsigned int pkg_work_cnt; |
| |
| static int pkg_temp_debugfs_init(void) |
| { |
| struct dentry *d; |
| |
| debugfs = debugfs_create_dir("pkg_temp_thermal", NULL); |
| if (!debugfs) |
| return -ENOENT; |
| |
| d = debugfs_create_u32("pkg_thres_interrupt", S_IRUGO, debugfs, |
| (u32 *)&pkg_interrupt_cnt); |
| if (!d) |
| goto err_out; |
| |
| d = debugfs_create_u32("pkg_thres_work", S_IRUGO, debugfs, |
| (u32 *)&pkg_work_cnt); |
| if (!d) |
| goto err_out; |
| |
| return 0; |
| |
| err_out: |
| debugfs_remove_recursive(debugfs); |
| return -ENOENT; |
| } |
| |
| static struct phy_dev_entry |
| *pkg_temp_thermal_get_phy_entry(unsigned int cpu) |
| { |
| u16 phys_proc_id = topology_physical_package_id(cpu); |
| struct phy_dev_entry *phy_ptr; |
| |
| mutex_lock(&phy_dev_list_mutex); |
| |
| list_for_each_entry(phy_ptr, &phy_dev_list, list) |
| if (phy_ptr->phys_proc_id == phys_proc_id) { |
| mutex_unlock(&phy_dev_list_mutex); |
| return phy_ptr; |
| } |
| |
| mutex_unlock(&phy_dev_list_mutex); |
| |
| return NULL; |
| } |
| |
| /* |
| * tj-max is is interesting because threshold is set relative to this |
| * temperature. |
| */ |
| static int get_tj_max(int cpu, u32 *tj_max) |
| { |
| u32 eax, edx; |
| u32 val; |
| int err; |
| |
| err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); |
| if (err) |
| goto err_ret; |
| else { |
| val = (eax >> 16) & 0xff; |
| if (val) |
| *tj_max = val * 1000; |
| else { |
| err = -EINVAL; |
| goto err_ret; |
| } |
| } |
| |
| return 0; |
| err_ret: |
| *tj_max = 0; |
| return err; |
| } |
| |
| static int sys_get_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp) |
| { |
| u32 eax, edx; |
| struct phy_dev_entry *phy_dev_entry; |
| |
| phy_dev_entry = tzd->devdata; |
| rdmsr_on_cpu(phy_dev_entry->first_cpu, MSR_IA32_PACKAGE_THERM_STATUS, |
| &eax, &edx); |
| if (eax & 0x80000000) { |
| *temp = phy_dev_entry->tj_max - |
| ((eax >> 16) & 0x7f) * 1000; |
| pr_debug("sys_get_curr_temp %ld\n", *temp); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int sys_get_trip_temp(struct thermal_zone_device *tzd, |
| int trip, unsigned long *temp) |
| { |
| u32 eax, edx; |
| struct phy_dev_entry *phy_dev_entry; |
| u32 mask, shift; |
| unsigned long thres_reg_value; |
| int ret; |
| |
| if (trip >= MAX_NUMBER_OF_TRIPS) |
| return -EINVAL; |
| |
| phy_dev_entry = tzd->devdata; |
| |
| if (trip) { |
| mask = THERM_MASK_THRESHOLD1; |
| shift = THERM_SHIFT_THRESHOLD1; |
| } else { |
| mask = THERM_MASK_THRESHOLD0; |
| shift = THERM_SHIFT_THRESHOLD0; |
| } |
| |
| ret = rdmsr_on_cpu(phy_dev_entry->first_cpu, |
| MSR_IA32_PACKAGE_THERM_INTERRUPT, &eax, &edx); |
| if (ret < 0) |
| return -EINVAL; |
| |
| thres_reg_value = (eax & mask) >> shift; |
| if (thres_reg_value) |
| *temp = phy_dev_entry->tj_max - thres_reg_value * 1000; |
| else |
| *temp = 0; |
| pr_debug("sys_get_trip_temp %ld\n", *temp); |
| |
| return 0; |
| } |
| |
| static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, |
| unsigned long temp) |
| { |
| u32 l, h; |
| struct phy_dev_entry *phy_dev_entry; |
| u32 mask, shift, intr; |
| int ret; |
| |
| phy_dev_entry = tzd->devdata; |
| |
| if (trip >= MAX_NUMBER_OF_TRIPS || temp >= phy_dev_entry->tj_max) |
| return -EINVAL; |
| |
| ret = rdmsr_on_cpu(phy_dev_entry->first_cpu, |
| MSR_IA32_PACKAGE_THERM_INTERRUPT, |
| &l, &h); |
| if (ret < 0) |
| return -EINVAL; |
| |
| if (trip) { |
| mask = THERM_MASK_THRESHOLD1; |
| shift = THERM_SHIFT_THRESHOLD1; |
| intr = THERM_INT_THRESHOLD1_ENABLE; |
| } else { |
| mask = THERM_MASK_THRESHOLD0; |
| shift = THERM_SHIFT_THRESHOLD0; |
| intr = THERM_INT_THRESHOLD0_ENABLE; |
| } |
| l &= ~mask; |
| /* |
| * When users space sets a trip temperature == 0, which is indication |
| * that, it is no longer interested in receiving notifications. |
| */ |
| if (!temp) |
| l &= ~intr; |
| else { |
| l |= (phy_dev_entry->tj_max - temp)/1000 << shift; |
| l |= intr; |
| } |
| |
| return wrmsr_on_cpu(phy_dev_entry->first_cpu, |
| MSR_IA32_PACKAGE_THERM_INTERRUPT, |
| l, h); |
| } |
| |
| static int sys_get_trip_type(struct thermal_zone_device *thermal, |
| int trip, enum thermal_trip_type *type) |
| { |
| |
| *type = THERMAL_TRIP_PASSIVE; |
| |
| return 0; |
| } |
| |
| /* Thermal zone callback registry */ |
| static struct thermal_zone_device_ops tzone_ops = { |
| .get_temp = sys_get_curr_temp, |
| .get_trip_temp = sys_get_trip_temp, |
| .get_trip_type = sys_get_trip_type, |
| .set_trip_temp = sys_set_trip_temp, |
| }; |
| |
| static bool pkg_temp_thermal_platform_thermal_rate_control(void) |
| { |
| return true; |
| } |
| |
| /* Enable threshold interrupt on local package/cpu */ |
| static inline void enable_pkg_thres_interrupt(void) |
| { |
| u32 l, h; |
| u8 thres_0, thres_1; |
| |
| rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); |
| /* only enable/disable if it had valid threshold value */ |
| thres_0 = (l & THERM_MASK_THRESHOLD0) >> THERM_SHIFT_THRESHOLD0; |
| thres_1 = (l & THERM_MASK_THRESHOLD1) >> THERM_SHIFT_THRESHOLD1; |
| if (thres_0) |
| l |= THERM_INT_THRESHOLD0_ENABLE; |
| if (thres_1) |
| l |= THERM_INT_THRESHOLD1_ENABLE; |
| wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); |
| } |
| |
| /* Disable threshold interrupt on local package/cpu */ |
| static inline void disable_pkg_thres_interrupt(void) |
| { |
| u32 l, h; |
| rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); |
| wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, |
| l & (~THERM_INT_THRESHOLD0_ENABLE) & |
| (~THERM_INT_THRESHOLD1_ENABLE), h); |
| } |
| |
| static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work) |
| { |
| __u64 msr_val; |
| int cpu = smp_processor_id(); |
| int phy_id = topology_physical_package_id(cpu); |
| struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); |
| bool notify = false; |
| unsigned long flags; |
| |
| if (!phdev) |
| return; |
| |
| spin_lock_irqsave(&pkg_work_lock, flags); |
| ++pkg_work_cnt; |
| if (unlikely(phy_id > max_phy_id)) { |
| spin_unlock_irqrestore(&pkg_work_lock, flags); |
| return; |
| } |
| pkg_work_scheduled[phy_id] = 0; |
| spin_unlock_irqrestore(&pkg_work_lock, flags); |
| |
| enable_pkg_thres_interrupt(); |
| rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); |
| if (msr_val & THERM_LOG_THRESHOLD0) { |
| wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, |
| msr_val & ~THERM_LOG_THRESHOLD0); |
| notify = true; |
| } |
| if (msr_val & THERM_LOG_THRESHOLD1) { |
| wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, |
| msr_val & ~THERM_LOG_THRESHOLD1); |
| notify = true; |
| } |
| if (notify) { |
| pr_debug("thermal_zone_device_update\n"); |
| thermal_zone_device_update(phdev->tzone); |
| } |
| } |
| |
| static int pkg_temp_thermal_platform_thermal_notify(__u64 msr_val) |
| { |
| unsigned long flags; |
| int cpu = smp_processor_id(); |
| int phy_id = topology_physical_package_id(cpu); |
| |
| /* |
| * When a package is in interrupted state, all CPU's in that package |
| * are in the same interrupt state. So scheduling on any one CPU in |
| * the package is enough and simply return for others. |
| */ |
| spin_lock_irqsave(&pkg_work_lock, flags); |
| ++pkg_interrupt_cnt; |
| if (unlikely(phy_id > max_phy_id) || unlikely(!pkg_work_scheduled) || |
| pkg_work_scheduled[phy_id]) { |
| disable_pkg_thres_interrupt(); |
| spin_unlock_irqrestore(&pkg_work_lock, flags); |
| return -EINVAL; |
| } |
| pkg_work_scheduled[phy_id] = 1; |
| spin_unlock_irqrestore(&pkg_work_lock, flags); |
| |
| disable_pkg_thres_interrupt(); |
| schedule_delayed_work_on(cpu, |
| &per_cpu(pkg_temp_thermal_threshold_work, cpu), |
| msecs_to_jiffies(notify_delay_ms)); |
| return 0; |
| } |
| |
| static int find_siblings_cpu(int cpu) |
| { |
| int i; |
| int id = topology_physical_package_id(cpu); |
| |
| for_each_online_cpu(i) |
| if (i != cpu && topology_physical_package_id(i) == id) |
| return i; |
| |
| return 0; |
| } |
| |
| static int pkg_temp_thermal_device_add(unsigned int cpu) |
| { |
| int err; |
| u32 tj_max; |
| struct phy_dev_entry *phy_dev_entry; |
| int thres_count; |
| u32 eax, ebx, ecx, edx; |
| u8 *temp; |
| unsigned long flags; |
| |
| cpuid(6, &eax, &ebx, &ecx, &edx); |
| thres_count = ebx & 0x07; |
| if (!thres_count) |
| return -ENODEV; |
| |
| if (topology_physical_package_id(cpu) > MAX_PKG_TEMP_ZONE_IDS) |
| return -ENODEV; |
| |
| thres_count = clamp_val(thres_count, 0, MAX_NUMBER_OF_TRIPS); |
| |
| err = get_tj_max(cpu, &tj_max); |
| if (err) |
| goto err_ret; |
| |
| mutex_lock(&phy_dev_list_mutex); |
| |
| phy_dev_entry = kzalloc(sizeof(*phy_dev_entry), GFP_KERNEL); |
| if (!phy_dev_entry) { |
| err = -ENOMEM; |
| goto err_ret_unlock; |
| } |
| |
| spin_lock_irqsave(&pkg_work_lock, flags); |
| if (topology_physical_package_id(cpu) > max_phy_id) |
| max_phy_id = topology_physical_package_id(cpu); |
| temp = krealloc(pkg_work_scheduled, |
| (max_phy_id+1) * sizeof(u8), GFP_ATOMIC); |
| if (!temp) { |
| spin_unlock_irqrestore(&pkg_work_lock, flags); |
| err = -ENOMEM; |
| goto err_ret_free; |
| } |
| pkg_work_scheduled = temp; |
| pkg_work_scheduled[topology_physical_package_id(cpu)] = 0; |
| spin_unlock_irqrestore(&pkg_work_lock, flags); |
| |
| phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu); |
| phy_dev_entry->first_cpu = cpu; |
| phy_dev_entry->tj_max = tj_max; |
| phy_dev_entry->ref_cnt = 1; |
| phy_dev_entry->tzone = thermal_zone_device_register("x86_pkg_temp", |
| thres_count, |
| (thres_count == MAX_NUMBER_OF_TRIPS) ? |
| 0x03 : 0x01, |
| phy_dev_entry, &tzone_ops, &pkg_temp_tz_params, 0, 0); |
| if (IS_ERR(phy_dev_entry->tzone)) { |
| err = PTR_ERR(phy_dev_entry->tzone); |
| goto err_ret_free; |
| } |
| /* Store MSR value for package thermal interrupt, to restore at exit */ |
| rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, |
| &phy_dev_entry->start_pkg_therm_low, |
| &phy_dev_entry->start_pkg_therm_high); |
| |
| list_add_tail(&phy_dev_entry->list, &phy_dev_list); |
| pr_debug("pkg_temp_thermal_device_add :phy_id %d cpu %d\n", |
| phy_dev_entry->phys_proc_id, cpu); |
| |
| mutex_unlock(&phy_dev_list_mutex); |
| |
| return 0; |
| |
| err_ret_free: |
| kfree(phy_dev_entry); |
| err_ret_unlock: |
| mutex_unlock(&phy_dev_list_mutex); |
| |
| err_ret: |
| return err; |
| } |
| |
| static int pkg_temp_thermal_device_remove(unsigned int cpu) |
| { |
| struct phy_dev_entry *n; |
| u16 phys_proc_id = topology_physical_package_id(cpu); |
| struct phy_dev_entry *phdev = |
| pkg_temp_thermal_get_phy_entry(cpu); |
| |
| if (!phdev) |
| return -ENODEV; |
| |
| mutex_lock(&phy_dev_list_mutex); |
| /* If we are loosing the first cpu for this package, we need change */ |
| if (phdev->first_cpu == cpu) { |
| phdev->first_cpu = find_siblings_cpu(cpu); |
| pr_debug("thermal_device_remove: first cpu switched %d\n", |
| phdev->first_cpu); |
| } |
| /* |
| * It is possible that no siblings left as this was the last cpu |
| * going offline. We don't need to worry about this assignment |
| * as the phydev entry will be removed in this case and |
| * thermal zone is removed. |
| */ |
| --phdev->ref_cnt; |
| pr_debug("thermal_device_remove: pkg: %d cpu %d ref_cnt %d\n", |
| phys_proc_id, cpu, phdev->ref_cnt); |
| if (!phdev->ref_cnt) |
| list_for_each_entry_safe(phdev, n, &phy_dev_list, list) { |
| if (phdev->phys_proc_id == phys_proc_id) { |
| thermal_zone_device_unregister(phdev->tzone); |
| list_del(&phdev->list); |
| kfree(phdev); |
| break; |
| } |
| } |
| mutex_unlock(&phy_dev_list_mutex); |
| |
| return 0; |
| } |
| |
| static int get_core_online(unsigned int cpu) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); |
| |
| /* Check if there is already an instance for this package */ |
| if (!phdev) { |
| if (!cpu_has(c, X86_FEATURE_DTHERM) || |
| !cpu_has(c, X86_FEATURE_PTS)) |
| return -ENODEV; |
| if (pkg_temp_thermal_device_add(cpu)) |
| return -ENODEV; |
| } else { |
| mutex_lock(&phy_dev_list_mutex); |
| ++phdev->ref_cnt; |
| pr_debug("get_core_online: cpu %d ref_cnt %d\n", |
| cpu, phdev->ref_cnt); |
| mutex_unlock(&phy_dev_list_mutex); |
| } |
| INIT_DELAYED_WORK(&per_cpu(pkg_temp_thermal_threshold_work, cpu), |
| pkg_temp_thermal_threshold_work_fn); |
| |
| pr_debug("get_core_online: cpu %d successful\n", cpu); |
| |
| return 0; |
| } |
| |
| static void put_core_offline(unsigned int cpu) |
| { |
| if (!pkg_temp_thermal_device_remove(cpu)) |
| cancel_delayed_work_sync( |
| &per_cpu(pkg_temp_thermal_threshold_work, cpu)); |
| |
| pr_debug("put_core_offline: cpu %d\n", cpu); |
| } |
| |
| static int pkg_temp_thermal_cpu_callback(struct notifier_block *nfb, |
| unsigned long action, void *hcpu) |
| { |
| unsigned int cpu = (unsigned long) hcpu; |
| |
| switch (action) { |
| case CPU_ONLINE: |
| case CPU_DOWN_FAILED: |
| get_core_online(cpu); |
| break; |
| case CPU_DOWN_PREPARE: |
| put_core_offline(cpu); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block pkg_temp_thermal_notifier __refdata = { |
| .notifier_call = pkg_temp_thermal_cpu_callback, |
| }; |
| |
| static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = { |
| { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_PTS }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids); |
| |
| static int __init pkg_temp_thermal_init(void) |
| { |
| int i; |
| |
| if (!x86_match_cpu(pkg_temp_thermal_ids)) |
| return -ENODEV; |
| |
| spin_lock_init(&pkg_work_lock); |
| platform_thermal_package_notify = |
| pkg_temp_thermal_platform_thermal_notify; |
| platform_thermal_package_rate_control = |
| pkg_temp_thermal_platform_thermal_rate_control; |
| |
| cpu_notifier_register_begin(); |
| for_each_online_cpu(i) |
| if (get_core_online(i)) |
| goto err_ret; |
| __register_hotcpu_notifier(&pkg_temp_thermal_notifier); |
| cpu_notifier_register_done(); |
| |
| pkg_temp_debugfs_init(); /* Don't care if fails */ |
| |
| return 0; |
| |
| err_ret: |
| for_each_online_cpu(i) |
| put_core_offline(i); |
| cpu_notifier_register_done(); |
| kfree(pkg_work_scheduled); |
| platform_thermal_package_notify = NULL; |
| platform_thermal_package_rate_control = NULL; |
| |
| return -ENODEV; |
| } |
| |
| static void __exit pkg_temp_thermal_exit(void) |
| { |
| struct phy_dev_entry *phdev, *n; |
| int i; |
| |
| cpu_notifier_register_begin(); |
| __unregister_hotcpu_notifier(&pkg_temp_thermal_notifier); |
| mutex_lock(&phy_dev_list_mutex); |
| list_for_each_entry_safe(phdev, n, &phy_dev_list, list) { |
| /* Retore old MSR value for package thermal interrupt */ |
| wrmsr_on_cpu(phdev->first_cpu, |
| MSR_IA32_PACKAGE_THERM_INTERRUPT, |
| phdev->start_pkg_therm_low, |
| phdev->start_pkg_therm_high); |
| thermal_zone_device_unregister(phdev->tzone); |
| list_del(&phdev->list); |
| kfree(phdev); |
| } |
| mutex_unlock(&phy_dev_list_mutex); |
| platform_thermal_package_notify = NULL; |
| platform_thermal_package_rate_control = NULL; |
| for_each_online_cpu(i) |
| cancel_delayed_work_sync( |
| &per_cpu(pkg_temp_thermal_threshold_work, i)); |
| cpu_notifier_register_done(); |
| |
| kfree(pkg_work_scheduled); |
| |
| debugfs_remove_recursive(debugfs); |
| } |
| |
| module_init(pkg_temp_thermal_init) |
| module_exit(pkg_temp_thermal_exit) |
| |
| MODULE_DESCRIPTION("X86 PKG TEMP Thermal Driver"); |
| MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); |
| MODULE_LICENSE("GPL v2"); |