| /* |
| * Copyright (C) 2008 Maarten Maathuis. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sublicense, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial |
| * portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
| * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "drmP.h" |
| #include "drm_mode.h" |
| #include "drm_crtc_helper.h" |
| |
| #define NOUVEAU_DMA_DEBUG (nouveau_reg_debug & NOUVEAU_REG_DEBUG_EVO) |
| #include "nouveau_reg.h" |
| #include "nouveau_drv.h" |
| #include "nouveau_hw.h" |
| #include "nouveau_encoder.h" |
| #include "nouveau_crtc.h" |
| #include "nouveau_fb.h" |
| #include "nouveau_connector.h" |
| #include "nv50_display.h" |
| |
| static void |
| nv50_crtc_lut_load(struct drm_crtc *crtc) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| void __iomem *lut = nvbo_kmap_obj_iovirtual(nv_crtc->lut.nvbo); |
| int i; |
| |
| NV_DEBUG_KMS(crtc->dev, "\n"); |
| |
| for (i = 0; i < 256; i++) { |
| writew(nv_crtc->lut.r[i] >> 2, lut + 8*i + 0); |
| writew(nv_crtc->lut.g[i] >> 2, lut + 8*i + 2); |
| writew(nv_crtc->lut.b[i] >> 2, lut + 8*i + 4); |
| } |
| |
| if (nv_crtc->lut.depth == 30) { |
| writew(nv_crtc->lut.r[i - 1] >> 2, lut + 8*i + 0); |
| writew(nv_crtc->lut.g[i - 1] >> 2, lut + 8*i + 2); |
| writew(nv_crtc->lut.b[i - 1] >> 2, lut + 8*i + 4); |
| } |
| } |
| |
| int |
| nv50_crtc_blank(struct nouveau_crtc *nv_crtc, bool blanked) |
| { |
| struct drm_device *dev = nv_crtc->base.dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_channel *evo = nv50_display(dev)->master; |
| int index = nv_crtc->index, ret; |
| |
| NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); |
| NV_DEBUG_KMS(dev, "%s\n", blanked ? "blanked" : "unblanked"); |
| |
| if (blanked) { |
| nv_crtc->cursor.hide(nv_crtc, false); |
| |
| ret = RING_SPACE(evo, dev_priv->chipset != 0x50 ? 7 : 5); |
| if (ret) { |
| NV_ERROR(dev, "no space while blanking crtc\n"); |
| return ret; |
| } |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(index, CLUT_MODE), 2); |
| OUT_RING(evo, NV50_EVO_CRTC_CLUT_MODE_BLANK); |
| OUT_RING(evo, 0); |
| if (dev_priv->chipset != 0x50) { |
| BEGIN_RING(evo, 0, NV84_EVO_CRTC(index, CLUT_DMA), 1); |
| OUT_RING(evo, NV84_EVO_CRTC_CLUT_DMA_HANDLE_NONE); |
| } |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(index, FB_DMA), 1); |
| OUT_RING(evo, NV50_EVO_CRTC_FB_DMA_HANDLE_NONE); |
| } else { |
| if (nv_crtc->cursor.visible) |
| nv_crtc->cursor.show(nv_crtc, false); |
| else |
| nv_crtc->cursor.hide(nv_crtc, false); |
| |
| ret = RING_SPACE(evo, dev_priv->chipset != 0x50 ? 10 : 8); |
| if (ret) { |
| NV_ERROR(dev, "no space while unblanking crtc\n"); |
| return ret; |
| } |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(index, CLUT_MODE), 2); |
| OUT_RING(evo, nv_crtc->lut.depth == 8 ? |
| NV50_EVO_CRTC_CLUT_MODE_OFF : |
| NV50_EVO_CRTC_CLUT_MODE_ON); |
| OUT_RING(evo, (nv_crtc->lut.nvbo->bo.mem.start << PAGE_SHIFT) >> 8); |
| if (dev_priv->chipset != 0x50) { |
| BEGIN_RING(evo, 0, NV84_EVO_CRTC(index, CLUT_DMA), 1); |
| OUT_RING(evo, NvEvoVRAM); |
| } |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(index, FB_OFFSET), 2); |
| OUT_RING(evo, nv_crtc->fb.offset >> 8); |
| OUT_RING(evo, 0); |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(index, FB_DMA), 1); |
| if (dev_priv->chipset != 0x50) |
| if (nv_crtc->fb.tile_flags == 0x7a00 || |
| nv_crtc->fb.tile_flags == 0xfe00) |
| OUT_RING(evo, NvEvoFB32); |
| else |
| if (nv_crtc->fb.tile_flags == 0x7000) |
| OUT_RING(evo, NvEvoFB16); |
| else |
| OUT_RING(evo, NvEvoVRAM_LP); |
| else |
| OUT_RING(evo, NvEvoVRAM_LP); |
| } |
| |
| nv_crtc->fb.blanked = blanked; |
| return 0; |
| } |
| |
| static int |
| nv50_crtc_set_dither(struct nouveau_crtc *nv_crtc, bool on, bool update) |
| { |
| struct drm_device *dev = nv_crtc->base.dev; |
| struct nouveau_channel *evo = nv50_display(dev)->master; |
| int ret; |
| |
| NV_DEBUG_KMS(dev, "\n"); |
| |
| ret = RING_SPACE(evo, 2 + (update ? 2 : 0)); |
| if (ret) { |
| NV_ERROR(dev, "no space while setting dither\n"); |
| return ret; |
| } |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, DITHER_CTRL), 1); |
| if (on) |
| OUT_RING(evo, NV50_EVO_CRTC_DITHER_CTRL_ON); |
| else |
| OUT_RING(evo, NV50_EVO_CRTC_DITHER_CTRL_OFF); |
| |
| if (update) { |
| BEGIN_RING(evo, 0, NV50_EVO_UPDATE, 1); |
| OUT_RING(evo, 0); |
| FIRE_RING(evo); |
| } |
| |
| return 0; |
| } |
| |
| struct nouveau_connector * |
| nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) |
| { |
| struct drm_device *dev = nv_crtc->base.dev; |
| struct drm_connector *connector; |
| struct drm_crtc *crtc = to_drm_crtc(nv_crtc); |
| |
| /* The safest approach is to find an encoder with the right crtc, that |
| * is also linked to a connector. */ |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| if (connector->encoder) |
| if (connector->encoder->crtc == crtc) |
| return nouveau_connector(connector); |
| } |
| |
| return NULL; |
| } |
| |
| static int |
| nv50_crtc_set_scale(struct nouveau_crtc *nv_crtc, int scaling_mode, bool update) |
| { |
| struct nouveau_connector *nv_connector = |
| nouveau_crtc_connector_get(nv_crtc); |
| struct drm_device *dev = nv_crtc->base.dev; |
| struct nouveau_channel *evo = nv50_display(dev)->master; |
| struct drm_display_mode *native_mode = NULL; |
| struct drm_display_mode *mode = &nv_crtc->base.mode; |
| uint32_t outX, outY, horiz, vert; |
| int ret; |
| |
| NV_DEBUG_KMS(dev, "\n"); |
| |
| switch (scaling_mode) { |
| case DRM_MODE_SCALE_NONE: |
| break; |
| default: |
| if (!nv_connector || !nv_connector->native_mode) { |
| NV_ERROR(dev, "No native mode, forcing panel scaling\n"); |
| scaling_mode = DRM_MODE_SCALE_NONE; |
| } else { |
| native_mode = nv_connector->native_mode; |
| } |
| break; |
| } |
| |
| switch (scaling_mode) { |
| case DRM_MODE_SCALE_ASPECT: |
| horiz = (native_mode->hdisplay << 19) / mode->hdisplay; |
| vert = (native_mode->vdisplay << 19) / mode->vdisplay; |
| |
| if (vert > horiz) { |
| outX = (mode->hdisplay * horiz) >> 19; |
| outY = (mode->vdisplay * horiz) >> 19; |
| } else { |
| outX = (mode->hdisplay * vert) >> 19; |
| outY = (mode->vdisplay * vert) >> 19; |
| } |
| break; |
| case DRM_MODE_SCALE_FULLSCREEN: |
| outX = native_mode->hdisplay; |
| outY = native_mode->vdisplay; |
| break; |
| case DRM_MODE_SCALE_CENTER: |
| case DRM_MODE_SCALE_NONE: |
| default: |
| outX = mode->hdisplay; |
| outY = mode->vdisplay; |
| break; |
| } |
| |
| ret = RING_SPACE(evo, update ? 7 : 5); |
| if (ret) |
| return ret; |
| |
| /* Got a better name for SCALER_ACTIVE? */ |
| /* One day i've got to really figure out why this is needed. */ |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, SCALE_CTRL), 1); |
| if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) || |
| (mode->flags & DRM_MODE_FLAG_INTERLACE) || |
| mode->hdisplay != outX || mode->vdisplay != outY) { |
| OUT_RING(evo, NV50_EVO_CRTC_SCALE_CTRL_ACTIVE); |
| } else { |
| OUT_RING(evo, NV50_EVO_CRTC_SCALE_CTRL_INACTIVE); |
| } |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, SCALE_RES1), 2); |
| OUT_RING(evo, outY << 16 | outX); |
| OUT_RING(evo, outY << 16 | outX); |
| |
| if (update) { |
| BEGIN_RING(evo, 0, NV50_EVO_UPDATE, 1); |
| OUT_RING(evo, 0); |
| FIRE_RING(evo); |
| } |
| |
| return 0; |
| } |
| |
| int |
| nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk) |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct pll_lims pll; |
| uint32_t reg1, reg2; |
| int ret, N1, M1, N2, M2, P; |
| |
| ret = get_pll_limits(dev, PLL_VPLL0 + head, &pll); |
| if (ret) |
| return ret; |
| |
| if (pll.vco2.maxfreq) { |
| ret = nv50_calc_pll(dev, &pll, pclk, &N1, &M1, &N2, &M2, &P); |
| if (ret <= 0) |
| return 0; |
| |
| NV_DEBUG(dev, "pclk %d out %d NM1 %d %d NM2 %d %d P %d\n", |
| pclk, ret, N1, M1, N2, M2, P); |
| |
| reg1 = nv_rd32(dev, pll.reg + 4) & 0xff00ff00; |
| reg2 = nv_rd32(dev, pll.reg + 8) & 0x8000ff00; |
| nv_wr32(dev, pll.reg + 0, 0x10000611); |
| nv_wr32(dev, pll.reg + 4, reg1 | (M1 << 16) | N1); |
| nv_wr32(dev, pll.reg + 8, reg2 | (P << 28) | (M2 << 16) | N2); |
| } else |
| if (dev_priv->chipset < NV_C0) { |
| ret = nv50_calc_pll2(dev, &pll, pclk, &N1, &N2, &M1, &P); |
| if (ret <= 0) |
| return 0; |
| |
| NV_DEBUG(dev, "pclk %d out %d N %d fN 0x%04x M %d P %d\n", |
| pclk, ret, N1, N2, M1, P); |
| |
| reg1 = nv_rd32(dev, pll.reg + 4) & 0xffc00000; |
| nv_wr32(dev, pll.reg + 0, 0x50000610); |
| nv_wr32(dev, pll.reg + 4, reg1 | (P << 16) | (M1 << 8) | N1); |
| nv_wr32(dev, pll.reg + 8, N2); |
| } else { |
| ret = nv50_calc_pll2(dev, &pll, pclk, &N1, &N2, &M1, &P); |
| if (ret <= 0) |
| return 0; |
| |
| NV_DEBUG(dev, "pclk %d out %d N %d fN 0x%04x M %d P %d\n", |
| pclk, ret, N1, N2, M1, P); |
| |
| nv_mask(dev, pll.reg + 0x0c, 0x00000000, 0x00000100); |
| nv_wr32(dev, pll.reg + 0x04, (P << 16) | (N1 << 8) | M1); |
| nv_wr32(dev, pll.reg + 0x10, N2 << 16); |
| } |
| |
| return 0; |
| } |
| |
| static void |
| nv50_crtc_destroy(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev; |
| struct nouveau_crtc *nv_crtc; |
| |
| if (!crtc) |
| return; |
| |
| dev = crtc->dev; |
| nv_crtc = nouveau_crtc(crtc); |
| |
| NV_DEBUG_KMS(dev, "\n"); |
| |
| drm_crtc_cleanup(&nv_crtc->base); |
| |
| nv50_cursor_fini(nv_crtc); |
| |
| nouveau_bo_unmap(nv_crtc->lut.nvbo); |
| nouveau_bo_ref(NULL, &nv_crtc->lut.nvbo); |
| nouveau_bo_unmap(nv_crtc->cursor.nvbo); |
| nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo); |
| kfree(nv_crtc->mode); |
| kfree(nv_crtc); |
| } |
| |
| int |
| nv50_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, |
| uint32_t buffer_handle, uint32_t width, uint32_t height) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct nouveau_bo *cursor = NULL; |
| struct drm_gem_object *gem; |
| int ret = 0, i; |
| |
| if (width != 64 || height != 64) |
| return -EINVAL; |
| |
| if (!buffer_handle) { |
| nv_crtc->cursor.hide(nv_crtc, true); |
| return 0; |
| } |
| |
| gem = drm_gem_object_lookup(dev, file_priv, buffer_handle); |
| if (!gem) |
| return -ENOENT; |
| cursor = nouveau_gem_object(gem); |
| |
| ret = nouveau_bo_map(cursor); |
| if (ret) |
| goto out; |
| |
| /* The simple will do for now. */ |
| for (i = 0; i < 64 * 64; i++) |
| nouveau_bo_wr32(nv_crtc->cursor.nvbo, i, nouveau_bo_rd32(cursor, i)); |
| |
| nouveau_bo_unmap(cursor); |
| |
| nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.nvbo->bo.mem.start << PAGE_SHIFT); |
| nv_crtc->cursor.show(nv_crtc, true); |
| |
| out: |
| drm_gem_object_unreference_unlocked(gem); |
| return ret; |
| } |
| |
| int |
| nv50_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| |
| nv_crtc->cursor.set_pos(nv_crtc, x, y); |
| return 0; |
| } |
| |
| static void |
| nv50_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, |
| uint32_t start, uint32_t size) |
| { |
| int end = (start + size > 256) ? 256 : start + size, i; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| |
| for (i = start; i < end; i++) { |
| nv_crtc->lut.r[i] = r[i]; |
| nv_crtc->lut.g[i] = g[i]; |
| nv_crtc->lut.b[i] = b[i]; |
| } |
| |
| /* We need to know the depth before we upload, but it's possible to |
| * get called before a framebuffer is bound. If this is the case, |
| * mark the lut values as dirty by setting depth==0, and it'll be |
| * uploaded on the first mode_set_base() |
| */ |
| if (!nv_crtc->base.fb) { |
| nv_crtc->lut.depth = 0; |
| return; |
| } |
| |
| nv50_crtc_lut_load(crtc); |
| } |
| |
| static void |
| nv50_crtc_save(struct drm_crtc *crtc) |
| { |
| NV_ERROR(crtc->dev, "!!\n"); |
| } |
| |
| static void |
| nv50_crtc_restore(struct drm_crtc *crtc) |
| { |
| NV_ERROR(crtc->dev, "!!\n"); |
| } |
| |
| static const struct drm_crtc_funcs nv50_crtc_funcs = { |
| .save = nv50_crtc_save, |
| .restore = nv50_crtc_restore, |
| .cursor_set = nv50_crtc_cursor_set, |
| .cursor_move = nv50_crtc_cursor_move, |
| .gamma_set = nv50_crtc_gamma_set, |
| .set_config = drm_crtc_helper_set_config, |
| .page_flip = nouveau_crtc_page_flip, |
| .destroy = nv50_crtc_destroy, |
| }; |
| |
| static void |
| nv50_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| } |
| |
| static int |
| nv50_crtc_wait_complete(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer; |
| struct nv50_display *disp = nv50_display(dev); |
| struct nouveau_channel *evo = disp->master; |
| u64 start; |
| int ret; |
| |
| ret = RING_SPACE(evo, 6); |
| if (ret) |
| return ret; |
| BEGIN_RING(evo, 0, 0x0084, 1); |
| OUT_RING (evo, 0x80000000); |
| BEGIN_RING(evo, 0, 0x0080, 1); |
| OUT_RING (evo, 0); |
| BEGIN_RING(evo, 0, 0x0084, 1); |
| OUT_RING (evo, 0x00000000); |
| |
| nv_wo32(disp->ntfy, 0x000, 0x00000000); |
| FIRE_RING (evo); |
| |
| start = ptimer->read(dev); |
| do { |
| nv_wr32(dev, 0x61002c, 0x370); |
| nv_wr32(dev, 0x000140, 1); |
| |
| if (nv_ro32(disp->ntfy, 0x000)) |
| return 0; |
| } while (ptimer->read(dev) - start < 2000000000ULL); |
| |
| return -EBUSY; |
| } |
| |
| static void |
| nv50_crtc_prepare(struct drm_crtc *crtc) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| |
| NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); |
| |
| nv50_display_flip_stop(crtc); |
| drm_vblank_pre_modeset(dev, nv_crtc->index); |
| nv50_crtc_blank(nv_crtc, true); |
| } |
| |
| static void |
| nv50_crtc_commit(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| |
| NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); |
| |
| nv50_crtc_blank(nv_crtc, false); |
| drm_vblank_post_modeset(dev, nv_crtc->index); |
| nv50_crtc_wait_complete(crtc); |
| nv50_display_flip_next(crtc, crtc->fb, NULL); |
| } |
| |
| static bool |
| nv50_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| static int |
| nv50_crtc_do_mode_set_base(struct drm_crtc *crtc, |
| struct drm_framebuffer *passed_fb, |
| int x, int y, bool atomic) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_device *dev = nv_crtc->base.dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_channel *evo = nv50_display(dev)->master; |
| struct drm_framebuffer *drm_fb = nv_crtc->base.fb; |
| struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); |
| int ret; |
| |
| NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); |
| |
| /* If atomic, we want to switch to the fb we were passed, so |
| * now we update pointers to do that. (We don't pin; just |
| * assume we're already pinned and update the base address.) |
| */ |
| if (atomic) { |
| drm_fb = passed_fb; |
| fb = nouveau_framebuffer(passed_fb); |
| } |
| else { |
| /* If not atomic, we can go ahead and pin, and unpin the |
| * old fb we were passed. |
| */ |
| ret = nouveau_bo_pin(fb->nvbo, TTM_PL_FLAG_VRAM); |
| if (ret) |
| return ret; |
| |
| if (passed_fb) { |
| struct nouveau_framebuffer *ofb = nouveau_framebuffer(passed_fb); |
| nouveau_bo_unpin(ofb->nvbo); |
| } |
| } |
| |
| nv_crtc->fb.offset = fb->nvbo->bo.mem.start << PAGE_SHIFT; |
| nv_crtc->fb.tile_flags = nouveau_bo_tile_layout(fb->nvbo); |
| nv_crtc->fb.cpp = drm_fb->bits_per_pixel / 8; |
| if (!nv_crtc->fb.blanked && dev_priv->chipset != 0x50) { |
| ret = RING_SPACE(evo, 2); |
| if (ret) |
| return ret; |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, FB_DMA), 1); |
| OUT_RING (evo, fb->r_dma); |
| } |
| |
| ret = RING_SPACE(evo, 12); |
| if (ret) |
| return ret; |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, FB_OFFSET), 5); |
| OUT_RING (evo, nv_crtc->fb.offset >> 8); |
| OUT_RING (evo, 0); |
| OUT_RING (evo, (drm_fb->height << 16) | drm_fb->width); |
| OUT_RING (evo, fb->r_pitch); |
| OUT_RING (evo, fb->r_format); |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, CLUT_MODE), 1); |
| OUT_RING (evo, fb->base.depth == 8 ? |
| NV50_EVO_CRTC_CLUT_MODE_OFF : NV50_EVO_CRTC_CLUT_MODE_ON); |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, COLOR_CTRL), 1); |
| OUT_RING (evo, NV50_EVO_CRTC_COLOR_CTRL_COLOR); |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, FB_POS), 1); |
| OUT_RING (evo, (y << 16) | x); |
| |
| if (nv_crtc->lut.depth != fb->base.depth) { |
| nv_crtc->lut.depth = fb->base.depth; |
| nv50_crtc_lut_load(crtc); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| nv50_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct nouveau_channel *evo = nv50_display(dev)->master; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct nouveau_connector *nv_connector = NULL; |
| uint32_t hsync_dur, vsync_dur, hsync_start_to_end, vsync_start_to_end; |
| uint32_t hunk1, vunk1, vunk2a, vunk2b; |
| int ret; |
| |
| /* Find the connector attached to this CRTC */ |
| nv_connector = nouveau_crtc_connector_get(nv_crtc); |
| |
| *nv_crtc->mode = *adjusted_mode; |
| |
| NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); |
| |
| hsync_dur = adjusted_mode->hsync_end - adjusted_mode->hsync_start; |
| vsync_dur = adjusted_mode->vsync_end - adjusted_mode->vsync_start; |
| hsync_start_to_end = adjusted_mode->htotal - adjusted_mode->hsync_start; |
| vsync_start_to_end = adjusted_mode->vtotal - adjusted_mode->vsync_start; |
| /* I can't give this a proper name, anyone else can? */ |
| hunk1 = adjusted_mode->htotal - |
| adjusted_mode->hsync_start + adjusted_mode->hdisplay; |
| vunk1 = adjusted_mode->vtotal - |
| adjusted_mode->vsync_start + adjusted_mode->vdisplay; |
| /* Another strange value, this time only for interlaced adjusted_modes. */ |
| vunk2a = 2 * adjusted_mode->vtotal - |
| adjusted_mode->vsync_start + adjusted_mode->vdisplay; |
| vunk2b = adjusted_mode->vtotal - |
| adjusted_mode->vsync_start + adjusted_mode->vtotal; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| vsync_dur /= 2; |
| vsync_start_to_end /= 2; |
| vunk1 /= 2; |
| vunk2a /= 2; |
| vunk2b /= 2; |
| /* magic */ |
| if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) { |
| vsync_start_to_end -= 1; |
| vunk1 -= 1; |
| vunk2a -= 1; |
| vunk2b -= 1; |
| } |
| } |
| |
| ret = RING_SPACE(evo, 17); |
| if (ret) |
| return ret; |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, CLOCK), 2); |
| OUT_RING(evo, adjusted_mode->clock | 0x800000); |
| OUT_RING(evo, (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) ? 2 : 0); |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, DISPLAY_START), 5); |
| OUT_RING(evo, 0); |
| OUT_RING(evo, (adjusted_mode->vtotal << 16) | adjusted_mode->htotal); |
| OUT_RING(evo, (vsync_dur - 1) << 16 | (hsync_dur - 1)); |
| OUT_RING(evo, (vsync_start_to_end - 1) << 16 | |
| (hsync_start_to_end - 1)); |
| OUT_RING(evo, (vunk1 - 1) << 16 | (hunk1 - 1)); |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, UNK0824), 1); |
| OUT_RING(evo, (vunk2b - 1) << 16 | (vunk2a - 1)); |
| } else { |
| OUT_RING(evo, 0); |
| OUT_RING(evo, 0); |
| } |
| |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, UNK082C), 1); |
| OUT_RING(evo, 0); |
| |
| /* This is the actual resolution of the mode. */ |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, REAL_RES), 1); |
| OUT_RING(evo, (mode->vdisplay << 16) | mode->hdisplay); |
| BEGIN_RING(evo, 0, NV50_EVO_CRTC(nv_crtc->index, SCALE_CENTER_OFFSET), 1); |
| OUT_RING(evo, NV50_EVO_CRTC_SCALE_CENTER_OFFSET_VAL(0, 0)); |
| |
| nv_crtc->set_dither(nv_crtc, nv_connector->use_dithering, false); |
| nv_crtc->set_scale(nv_crtc, nv_connector->scaling_mode, false); |
| |
| return nv50_crtc_do_mode_set_base(crtc, old_fb, x, y, false); |
| } |
| |
| static int |
| nv50_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| int ret; |
| |
| nv50_display_flip_stop(crtc); |
| ret = nv50_crtc_do_mode_set_base(crtc, old_fb, x, y, false); |
| if (ret) |
| return ret; |
| |
| ret = nv50_crtc_wait_complete(crtc); |
| if (ret) |
| return ret; |
| |
| return nv50_display_flip_next(crtc, crtc->fb, NULL); |
| } |
| |
| static int |
| nv50_crtc_mode_set_base_atomic(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| int x, int y, enum mode_set_atomic state) |
| { |
| int ret; |
| |
| nv50_display_flip_stop(crtc); |
| ret = nv50_crtc_do_mode_set_base(crtc, fb, x, y, true); |
| if (ret) |
| return ret; |
| |
| return nv50_crtc_wait_complete(crtc); |
| } |
| |
| static const struct drm_crtc_helper_funcs nv50_crtc_helper_funcs = { |
| .dpms = nv50_crtc_dpms, |
| .prepare = nv50_crtc_prepare, |
| .commit = nv50_crtc_commit, |
| .mode_fixup = nv50_crtc_mode_fixup, |
| .mode_set = nv50_crtc_mode_set, |
| .mode_set_base = nv50_crtc_mode_set_base, |
| .mode_set_base_atomic = nv50_crtc_mode_set_base_atomic, |
| .load_lut = nv50_crtc_lut_load, |
| }; |
| |
| int |
| nv50_crtc_create(struct drm_device *dev, int index) |
| { |
| struct nouveau_crtc *nv_crtc = NULL; |
| int ret, i; |
| |
| NV_DEBUG_KMS(dev, "\n"); |
| |
| nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL); |
| if (!nv_crtc) |
| return -ENOMEM; |
| |
| nv_crtc->mode = kzalloc(sizeof(*nv_crtc->mode), GFP_KERNEL); |
| if (!nv_crtc->mode) { |
| kfree(nv_crtc); |
| return -ENOMEM; |
| } |
| |
| /* Default CLUT parameters, will be activated on the hw upon |
| * first mode set. |
| */ |
| for (i = 0; i < 256; i++) { |
| nv_crtc->lut.r[i] = i << 8; |
| nv_crtc->lut.g[i] = i << 8; |
| nv_crtc->lut.b[i] = i << 8; |
| } |
| nv_crtc->lut.depth = 0; |
| |
| ret = nouveau_bo_new(dev, NULL, 4096, 0x100, TTM_PL_FLAG_VRAM, |
| 0, 0x0000, &nv_crtc->lut.nvbo); |
| if (!ret) { |
| ret = nouveau_bo_pin(nv_crtc->lut.nvbo, TTM_PL_FLAG_VRAM); |
| if (!ret) |
| ret = nouveau_bo_map(nv_crtc->lut.nvbo); |
| if (ret) |
| nouveau_bo_ref(NULL, &nv_crtc->lut.nvbo); |
| } |
| |
| if (ret) { |
| kfree(nv_crtc->mode); |
| kfree(nv_crtc); |
| return ret; |
| } |
| |
| nv_crtc->index = index; |
| |
| /* set function pointers */ |
| nv_crtc->set_dither = nv50_crtc_set_dither; |
| nv_crtc->set_scale = nv50_crtc_set_scale; |
| |
| drm_crtc_init(dev, &nv_crtc->base, &nv50_crtc_funcs); |
| drm_crtc_helper_add(&nv_crtc->base, &nv50_crtc_helper_funcs); |
| drm_mode_crtc_set_gamma_size(&nv_crtc->base, 256); |
| |
| ret = nouveau_bo_new(dev, NULL, 64*64*4, 0x100, TTM_PL_FLAG_VRAM, |
| 0, 0x0000, &nv_crtc->cursor.nvbo); |
| if (!ret) { |
| ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM); |
| if (!ret) |
| ret = nouveau_bo_map(nv_crtc->cursor.nvbo); |
| if (ret) |
| nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo); |
| } |
| |
| nv50_cursor_init(nv_crtc); |
| return 0; |
| } |