| /* |
| * uvc_video.c -- USB Video Class driver - Video handling |
| * |
| * Copyright (C) 2005-2009 |
| * Laurent Pinchart (laurent.pinchart@skynet.be) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/videodev2.h> |
| #include <linux/vmalloc.h> |
| #include <linux/wait.h> |
| #include <asm/atomic.h> |
| #include <asm/unaligned.h> |
| |
| #include <media/v4l2-common.h> |
| |
| #include "uvcvideo.h" |
| |
| /* ------------------------------------------------------------------------ |
| * UVC Controls |
| */ |
| |
| static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, |
| __u8 intfnum, __u8 cs, void *data, __u16 size, |
| int timeout) |
| { |
| __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE; |
| unsigned int pipe; |
| |
| pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0) |
| : usb_sndctrlpipe(dev->udev, 0); |
| type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT; |
| |
| return usb_control_msg(dev->udev, pipe, query, type, cs << 8, |
| unit << 8 | intfnum, data, size, timeout); |
| } |
| |
| int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, |
| __u8 intfnum, __u8 cs, void *data, __u16 size) |
| { |
| int ret; |
| |
| ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size, |
| UVC_CTRL_CONTROL_TIMEOUT); |
| if (ret != size) { |
| uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u " |
| "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret, |
| size); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, |
| struct uvc_streaming_control *ctrl) |
| { |
| struct uvc_format *format; |
| struct uvc_frame *frame = NULL; |
| unsigned int i; |
| |
| if (ctrl->bFormatIndex <= 0 || |
| ctrl->bFormatIndex > stream->nformats) |
| return; |
| |
| format = &stream->format[ctrl->bFormatIndex - 1]; |
| |
| for (i = 0; i < format->nframes; ++i) { |
| if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) { |
| frame = &format->frame[i]; |
| break; |
| } |
| } |
| |
| if (frame == NULL) |
| return; |
| |
| if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || |
| (ctrl->dwMaxVideoFrameSize == 0 && |
| stream->dev->uvc_version < 0x0110)) |
| ctrl->dwMaxVideoFrameSize = |
| frame->dwMaxVideoFrameBufferSize; |
| |
| if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) && |
| stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && |
| stream->intf->num_altsetting > 1) { |
| u32 interval; |
| u32 bandwidth; |
| |
| interval = (ctrl->dwFrameInterval > 100000) |
| ? ctrl->dwFrameInterval |
| : frame->dwFrameInterval[0]; |
| |
| /* Compute a bandwidth estimation by multiplying the frame |
| * size by the number of video frames per second, divide the |
| * result by the number of USB frames (or micro-frames for |
| * high-speed devices) per second and add the UVC header size |
| * (assumed to be 12 bytes long). |
| */ |
| bandwidth = frame->wWidth * frame->wHeight / 8 * format->bpp; |
| bandwidth *= 10000000 / interval + 1; |
| bandwidth /= 1000; |
| if (stream->dev->udev->speed == USB_SPEED_HIGH) |
| bandwidth /= 8; |
| bandwidth += 12; |
| |
| ctrl->dwMaxPayloadTransferSize = bandwidth; |
| } |
| } |
| |
| static int uvc_get_video_ctrl(struct uvc_streaming *stream, |
| struct uvc_streaming_control *ctrl, int probe, __u8 query) |
| { |
| __u8 *data; |
| __u16 size; |
| int ret; |
| |
| size = stream->dev->uvc_version >= 0x0110 ? 34 : 26; |
| if ((stream->dev->quirks & UVC_QUIRK_PROBE_DEF) && |
| query == UVC_GET_DEF) |
| return -EIO; |
| |
| data = kmalloc(size, GFP_KERNEL); |
| if (data == NULL) |
| return -ENOMEM; |
| |
| ret = __uvc_query_ctrl(stream->dev, query, 0, stream->intfnum, |
| probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data, |
| size, uvc_timeout_param); |
| |
| if ((query == UVC_GET_MIN || query == UVC_GET_MAX) && ret == 2) { |
| /* Some cameras, mostly based on Bison Electronics chipsets, |
| * answer a GET_MIN or GET_MAX request with the wCompQuality |
| * field only. |
| */ |
| uvc_warn_once(stream->dev, UVC_WARN_MINMAX, "UVC non " |
| "compliance - GET_MIN/MAX(PROBE) incorrectly " |
| "supported. Enabling workaround.\n"); |
| memset(ctrl, 0, sizeof *ctrl); |
| ctrl->wCompQuality = le16_to_cpup((__le16 *)data); |
| ret = 0; |
| goto out; |
| } else if (query == UVC_GET_DEF && probe == 1 && ret != size) { |
| /* Many cameras don't support the GET_DEF request on their |
| * video probe control. Warn once and return, the caller will |
| * fall back to GET_CUR. |
| */ |
| uvc_warn_once(stream->dev, UVC_WARN_PROBE_DEF, "UVC non " |
| "compliance - GET_DEF(PROBE) not supported. " |
| "Enabling workaround.\n"); |
| ret = -EIO; |
| goto out; |
| } else if (ret != size) { |
| uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : " |
| "%d (exp. %u).\n", query, probe ? "probe" : "commit", |
| ret, size); |
| ret = -EIO; |
| goto out; |
| } |
| |
| ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); |
| ctrl->bFormatIndex = data[2]; |
| ctrl->bFrameIndex = data[3]; |
| ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]); |
| ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]); |
| ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]); |
| ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]); |
| ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]); |
| ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]); |
| ctrl->dwMaxVideoFrameSize = get_unaligned_le32(&data[18]); |
| ctrl->dwMaxPayloadTransferSize = get_unaligned_le32(&data[22]); |
| |
| if (size == 34) { |
| ctrl->dwClockFrequency = get_unaligned_le32(&data[26]); |
| ctrl->bmFramingInfo = data[30]; |
| ctrl->bPreferedVersion = data[31]; |
| ctrl->bMinVersion = data[32]; |
| ctrl->bMaxVersion = data[33]; |
| } else { |
| ctrl->dwClockFrequency = stream->dev->clock_frequency; |
| ctrl->bmFramingInfo = 0; |
| ctrl->bPreferedVersion = 0; |
| ctrl->bMinVersion = 0; |
| ctrl->bMaxVersion = 0; |
| } |
| |
| /* Some broken devices return null or wrong dwMaxVideoFrameSize and |
| * dwMaxPayloadTransferSize fields. Try to get the value from the |
| * format and frame descriptors. |
| */ |
| uvc_fixup_video_ctrl(stream, ctrl); |
| ret = 0; |
| |
| out: |
| kfree(data); |
| return ret; |
| } |
| |
| static int uvc_set_video_ctrl(struct uvc_streaming *stream, |
| struct uvc_streaming_control *ctrl, int probe) |
| { |
| __u8 *data; |
| __u16 size; |
| int ret; |
| |
| size = stream->dev->uvc_version >= 0x0110 ? 34 : 26; |
| data = kzalloc(size, GFP_KERNEL); |
| if (data == NULL) |
| return -ENOMEM; |
| |
| *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); |
| data[2] = ctrl->bFormatIndex; |
| data[3] = ctrl->bFrameIndex; |
| *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval); |
| *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate); |
| *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate); |
| *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); |
| *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); |
| *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); |
| put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]); |
| put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]); |
| |
| if (size == 34) { |
| put_unaligned_le32(ctrl->dwClockFrequency, &data[26]); |
| data[30] = ctrl->bmFramingInfo; |
| data[31] = ctrl->bPreferedVersion; |
| data[32] = ctrl->bMinVersion; |
| data[33] = ctrl->bMaxVersion; |
| } |
| |
| ret = __uvc_query_ctrl(stream->dev, UVC_SET_CUR, 0, stream->intfnum, |
| probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data, |
| size, uvc_timeout_param); |
| if (ret != size) { |
| uvc_printk(KERN_ERR, "Failed to set UVC %s control : " |
| "%d (exp. %u).\n", probe ? "probe" : "commit", |
| ret, size); |
| ret = -EIO; |
| } |
| |
| kfree(data); |
| return ret; |
| } |
| |
| int uvc_probe_video(struct uvc_streaming *stream, |
| struct uvc_streaming_control *probe) |
| { |
| struct uvc_streaming_control probe_min, probe_max; |
| __u16 bandwidth; |
| unsigned int i; |
| int ret; |
| |
| mutex_lock(&stream->mutex); |
| |
| /* Perform probing. The device should adjust the requested values |
| * according to its capabilities. However, some devices, namely the |
| * first generation UVC Logitech webcams, don't implement the Video |
| * Probe control properly, and just return the needed bandwidth. For |
| * that reason, if the needed bandwidth exceeds the maximum available |
| * bandwidth, try to lower the quality. |
| */ |
| ret = uvc_set_video_ctrl(stream, probe, 1); |
| if (ret < 0) |
| goto done; |
| |
| /* Get the minimum and maximum values for compression settings. */ |
| if (!(stream->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) { |
| ret = uvc_get_video_ctrl(stream, &probe_min, 1, UVC_GET_MIN); |
| if (ret < 0) |
| goto done; |
| ret = uvc_get_video_ctrl(stream, &probe_max, 1, UVC_GET_MAX); |
| if (ret < 0) |
| goto done; |
| |
| probe->wCompQuality = probe_max.wCompQuality; |
| } |
| |
| for (i = 0; i < 2; ++i) { |
| ret = uvc_set_video_ctrl(stream, probe, 1); |
| if (ret < 0) |
| goto done; |
| ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR); |
| if (ret < 0) |
| goto done; |
| |
| if (stream->intf->num_altsetting == 1) |
| break; |
| |
| bandwidth = probe->dwMaxPayloadTransferSize; |
| if (bandwidth <= stream->maxpsize) |
| break; |
| |
| if (stream->dev->quirks & UVC_QUIRK_PROBE_MINMAX) { |
| ret = -ENOSPC; |
| goto done; |
| } |
| |
| /* TODO: negotiate compression parameters */ |
| probe->wKeyFrameRate = probe_min.wKeyFrameRate; |
| probe->wPFrameRate = probe_min.wPFrameRate; |
| probe->wCompQuality = probe_max.wCompQuality; |
| probe->wCompWindowSize = probe_min.wCompWindowSize; |
| } |
| |
| done: |
| mutex_unlock(&stream->mutex); |
| return ret; |
| } |
| |
| int uvc_commit_video(struct uvc_streaming *stream, |
| struct uvc_streaming_control *probe) |
| { |
| return uvc_set_video_ctrl(stream, probe, 0); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Video codecs |
| */ |
| |
| /* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */ |
| #define UVC_STREAM_EOH (1 << 7) |
| #define UVC_STREAM_ERR (1 << 6) |
| #define UVC_STREAM_STI (1 << 5) |
| #define UVC_STREAM_RES (1 << 4) |
| #define UVC_STREAM_SCR (1 << 3) |
| #define UVC_STREAM_PTS (1 << 2) |
| #define UVC_STREAM_EOF (1 << 1) |
| #define UVC_STREAM_FID (1 << 0) |
| |
| /* Video payload decoding is handled by uvc_video_decode_start(), |
| * uvc_video_decode_data() and uvc_video_decode_end(). |
| * |
| * uvc_video_decode_start is called with URB data at the start of a bulk or |
| * isochronous payload. It processes header data and returns the header size |
| * in bytes if successful. If an error occurs, it returns a negative error |
| * code. The following error codes have special meanings. |
| * |
| * - EAGAIN informs the caller that the current video buffer should be marked |
| * as done, and that the function should be called again with the same data |
| * and a new video buffer. This is used when end of frame conditions can be |
| * reliably detected at the beginning of the next frame only. |
| * |
| * If an error other than -EAGAIN is returned, the caller will drop the current |
| * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be |
| * made until the next payload. -ENODATA can be used to drop the current |
| * payload if no other error code is appropriate. |
| * |
| * uvc_video_decode_data is called for every URB with URB data. It copies the |
| * data to the video buffer. |
| * |
| * uvc_video_decode_end is called with header data at the end of a bulk or |
| * isochronous payload. It performs any additional header data processing and |
| * returns 0 or a negative error code if an error occured. As header data have |
| * already been processed by uvc_video_decode_start, this functions isn't |
| * required to perform sanity checks a second time. |
| * |
| * For isochronous transfers where a payload is always transfered in a single |
| * URB, the three functions will be called in a row. |
| * |
| * To let the decoder process header data and update its internal state even |
| * when no video buffer is available, uvc_video_decode_start must be prepared |
| * to be called with a NULL buf parameter. uvc_video_decode_data and |
| * uvc_video_decode_end will never be called with a NULL buffer. |
| */ |
| static int uvc_video_decode_start(struct uvc_streaming *stream, |
| struct uvc_buffer *buf, const __u8 *data, int len) |
| { |
| __u8 fid; |
| |
| /* Sanity checks: |
| * - packet must be at least 2 bytes long |
| * - bHeaderLength value must be at least 2 bytes (see above) |
| * - bHeaderLength value can't be larger than the packet size. |
| */ |
| if (len < 2 || data[0] < 2 || data[0] > len) |
| return -EINVAL; |
| |
| /* Skip payloads marked with the error bit ("error frames"). */ |
| if (data[1] & UVC_STREAM_ERR) { |
| uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit " |
| "set).\n"); |
| return -ENODATA; |
| } |
| |
| fid = data[1] & UVC_STREAM_FID; |
| |
| /* Store the payload FID bit and return immediately when the buffer is |
| * NULL. |
| */ |
| if (buf == NULL) { |
| stream->last_fid = fid; |
| return -ENODATA; |
| } |
| |
| /* Synchronize to the input stream by waiting for the FID bit to be |
| * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. |
| * stream->last_fid is initialized to -1, so the first isochronous |
| * frame will always be in sync. |
| * |
| * If the device doesn't toggle the FID bit, invert stream->last_fid |
| * when the EOF bit is set to force synchronisation on the next packet. |
| */ |
| if (buf->state != UVC_BUF_STATE_ACTIVE) { |
| struct timespec ts; |
| |
| if (fid == stream->last_fid) { |
| uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of " |
| "sync).\n"); |
| if ((stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) && |
| (data[1] & UVC_STREAM_EOF)) |
| stream->last_fid ^= UVC_STREAM_FID; |
| return -ENODATA; |
| } |
| |
| if (uvc_clock_param == CLOCK_MONOTONIC) |
| ktime_get_ts(&ts); |
| else |
| ktime_get_real_ts(&ts); |
| |
| buf->buf.timestamp.tv_sec = ts.tv_sec; |
| buf->buf.timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC; |
| |
| /* TODO: Handle PTS and SCR. */ |
| buf->state = UVC_BUF_STATE_ACTIVE; |
| } |
| |
| /* Mark the buffer as done if we're at the beginning of a new frame. |
| * End of frame detection is better implemented by checking the EOF |
| * bit (FID bit toggling is delayed by one frame compared to the EOF |
| * bit), but some devices don't set the bit at end of frame (and the |
| * last payload can be lost anyway). We thus must check if the FID has |
| * been toggled. |
| * |
| * stream->last_fid is initialized to -1, so the first isochronous |
| * frame will never trigger an end of frame detection. |
| * |
| * Empty buffers (bytesused == 0) don't trigger end of frame detection |
| * as it doesn't make sense to return an empty buffer. This also |
| * avoids detecting end of frame conditions at FID toggling if the |
| * previous payload had the EOF bit set. |
| */ |
| if (fid != stream->last_fid && buf->buf.bytesused != 0) { |
| uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " |
| "toggled).\n"); |
| buf->state = UVC_BUF_STATE_READY; |
| return -EAGAIN; |
| } |
| |
| stream->last_fid = fid; |
| |
| return data[0]; |
| } |
| |
| static void uvc_video_decode_data(struct uvc_streaming *stream, |
| struct uvc_buffer *buf, const __u8 *data, int len) |
| { |
| struct uvc_video_queue *queue = &stream->queue; |
| unsigned int maxlen, nbytes; |
| void *mem; |
| |
| if (len <= 0) |
| return; |
| |
| /* Copy the video data to the buffer. */ |
| maxlen = buf->buf.length - buf->buf.bytesused; |
| mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; |
| nbytes = min((unsigned int)len, maxlen); |
| memcpy(mem, data, nbytes); |
| buf->buf.bytesused += nbytes; |
| |
| /* Complete the current frame if the buffer size was exceeded. */ |
| if (len > maxlen) { |
| uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); |
| buf->state = UVC_BUF_STATE_READY; |
| } |
| } |
| |
| static void uvc_video_decode_end(struct uvc_streaming *stream, |
| struct uvc_buffer *buf, const __u8 *data, int len) |
| { |
| /* Mark the buffer as done if the EOF marker is set. */ |
| if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) { |
| uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); |
| if (data[0] == len) |
| uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); |
| buf->state = UVC_BUF_STATE_READY; |
| if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) |
| stream->last_fid ^= UVC_STREAM_FID; |
| } |
| } |
| |
| /* Video payload encoding is handled by uvc_video_encode_header() and |
| * uvc_video_encode_data(). Only bulk transfers are currently supported. |
| * |
| * uvc_video_encode_header is called at the start of a payload. It adds header |
| * data to the transfer buffer and returns the header size. As the only known |
| * UVC output device transfers a whole frame in a single payload, the EOF bit |
| * is always set in the header. |
| * |
| * uvc_video_encode_data is called for every URB and copies the data from the |
| * video buffer to the transfer buffer. |
| */ |
| static int uvc_video_encode_header(struct uvc_streaming *stream, |
| struct uvc_buffer *buf, __u8 *data, int len) |
| { |
| data[0] = 2; /* Header length */ |
| data[1] = UVC_STREAM_EOH | UVC_STREAM_EOF |
| | (stream->last_fid & UVC_STREAM_FID); |
| return 2; |
| } |
| |
| static int uvc_video_encode_data(struct uvc_streaming *stream, |
| struct uvc_buffer *buf, __u8 *data, int len) |
| { |
| struct uvc_video_queue *queue = &stream->queue; |
| unsigned int nbytes; |
| void *mem; |
| |
| /* Copy video data to the URB buffer. */ |
| mem = queue->mem + buf->buf.m.offset + queue->buf_used; |
| nbytes = min((unsigned int)len, buf->buf.bytesused - queue->buf_used); |
| nbytes = min(stream->bulk.max_payload_size - stream->bulk.payload_size, |
| nbytes); |
| memcpy(data, mem, nbytes); |
| |
| queue->buf_used += nbytes; |
| |
| return nbytes; |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * URB handling |
| */ |
| |
| /* |
| * Completion handler for video URBs. |
| */ |
| static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream, |
| struct uvc_buffer *buf) |
| { |
| u8 *mem; |
| int ret, i; |
| |
| for (i = 0; i < urb->number_of_packets; ++i) { |
| if (urb->iso_frame_desc[i].status < 0) { |
| uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " |
| "lost (%d).\n", urb->iso_frame_desc[i].status); |
| continue; |
| } |
| |
| /* Decode the payload header. */ |
| mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset; |
| do { |
| ret = uvc_video_decode_start(stream, buf, mem, |
| urb->iso_frame_desc[i].actual_length); |
| if (ret == -EAGAIN) |
| buf = uvc_queue_next_buffer(&stream->queue, |
| buf); |
| } while (ret == -EAGAIN); |
| |
| if (ret < 0) |
| continue; |
| |
| /* Decode the payload data. */ |
| uvc_video_decode_data(stream, buf, mem + ret, |
| urb->iso_frame_desc[i].actual_length - ret); |
| |
| /* Process the header again. */ |
| uvc_video_decode_end(stream, buf, mem, |
| urb->iso_frame_desc[i].actual_length); |
| |
| if (buf->state == UVC_BUF_STATE_READY) |
| buf = uvc_queue_next_buffer(&stream->queue, buf); |
| } |
| } |
| |
| static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream, |
| struct uvc_buffer *buf) |
| { |
| u8 *mem; |
| int len, ret; |
| |
| if (urb->actual_length == 0) |
| return; |
| |
| mem = urb->transfer_buffer; |
| len = urb->actual_length; |
| stream->bulk.payload_size += len; |
| |
| /* If the URB is the first of its payload, decode and save the |
| * header. |
| */ |
| if (stream->bulk.header_size == 0 && !stream->bulk.skip_payload) { |
| do { |
| ret = uvc_video_decode_start(stream, buf, mem, len); |
| if (ret == -EAGAIN) |
| buf = uvc_queue_next_buffer(&stream->queue, |
| buf); |
| } while (ret == -EAGAIN); |
| |
| /* If an error occured skip the rest of the payload. */ |
| if (ret < 0 || buf == NULL) { |
| stream->bulk.skip_payload = 1; |
| } else { |
| memcpy(stream->bulk.header, mem, ret); |
| stream->bulk.header_size = ret; |
| |
| mem += ret; |
| len -= ret; |
| } |
| } |
| |
| /* The buffer queue might have been cancelled while a bulk transfer |
| * was in progress, so we can reach here with buf equal to NULL. Make |
| * sure buf is never dereferenced if NULL. |
| */ |
| |
| /* Process video data. */ |
| if (!stream->bulk.skip_payload && buf != NULL) |
| uvc_video_decode_data(stream, buf, mem, len); |
| |
| /* Detect the payload end by a URB smaller than the maximum size (or |
| * a payload size equal to the maximum) and process the header again. |
| */ |
| if (urb->actual_length < urb->transfer_buffer_length || |
| stream->bulk.payload_size >= stream->bulk.max_payload_size) { |
| if (!stream->bulk.skip_payload && buf != NULL) { |
| uvc_video_decode_end(stream, buf, stream->bulk.header, |
| stream->bulk.payload_size); |
| if (buf->state == UVC_BUF_STATE_READY) |
| buf = uvc_queue_next_buffer(&stream->queue, |
| buf); |
| } |
| |
| stream->bulk.header_size = 0; |
| stream->bulk.skip_payload = 0; |
| stream->bulk.payload_size = 0; |
| } |
| } |
| |
| static void uvc_video_encode_bulk(struct urb *urb, struct uvc_streaming *stream, |
| struct uvc_buffer *buf) |
| { |
| u8 *mem = urb->transfer_buffer; |
| int len = stream->urb_size, ret; |
| |
| if (buf == NULL) { |
| urb->transfer_buffer_length = 0; |
| return; |
| } |
| |
| /* If the URB is the first of its payload, add the header. */ |
| if (stream->bulk.header_size == 0) { |
| ret = uvc_video_encode_header(stream, buf, mem, len); |
| stream->bulk.header_size = ret; |
| stream->bulk.payload_size += ret; |
| mem += ret; |
| len -= ret; |
| } |
| |
| /* Process video data. */ |
| ret = uvc_video_encode_data(stream, buf, mem, len); |
| |
| stream->bulk.payload_size += ret; |
| len -= ret; |
| |
| if (buf->buf.bytesused == stream->queue.buf_used || |
| stream->bulk.payload_size == stream->bulk.max_payload_size) { |
| if (buf->buf.bytesused == stream->queue.buf_used) { |
| stream->queue.buf_used = 0; |
| buf->state = UVC_BUF_STATE_READY; |
| uvc_queue_next_buffer(&stream->queue, buf); |
| stream->last_fid ^= UVC_STREAM_FID; |
| } |
| |
| stream->bulk.header_size = 0; |
| stream->bulk.payload_size = 0; |
| } |
| |
| urb->transfer_buffer_length = stream->urb_size - len; |
| } |
| |
| static void uvc_video_complete(struct urb *urb) |
| { |
| struct uvc_streaming *stream = urb->context; |
| struct uvc_video_queue *queue = &stream->queue; |
| struct uvc_buffer *buf = NULL; |
| unsigned long flags; |
| int ret; |
| |
| switch (urb->status) { |
| case 0: |
| break; |
| |
| default: |
| uvc_printk(KERN_WARNING, "Non-zero status (%d) in video " |
| "completion handler.\n", urb->status); |
| |
| case -ENOENT: /* usb_kill_urb() called. */ |
| if (stream->frozen) |
| return; |
| |
| case -ECONNRESET: /* usb_unlink_urb() called. */ |
| case -ESHUTDOWN: /* The endpoint is being disabled. */ |
| uvc_queue_cancel(queue, urb->status == -ESHUTDOWN); |
| return; |
| } |
| |
| spin_lock_irqsave(&queue->irqlock, flags); |
| if (!list_empty(&queue->irqqueue)) |
| buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, |
| queue); |
| spin_unlock_irqrestore(&queue->irqlock, flags); |
| |
| stream->decode(urb, stream, buf); |
| |
| if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { |
| uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n", |
| ret); |
| } |
| } |
| |
| /* |
| * Free transfer buffers. |
| */ |
| static void uvc_free_urb_buffers(struct uvc_streaming *stream) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < UVC_URBS; ++i) { |
| if (stream->urb_buffer[i]) { |
| usb_buffer_free(stream->dev->udev, stream->urb_size, |
| stream->urb_buffer[i], stream->urb_dma[i]); |
| stream->urb_buffer[i] = NULL; |
| } |
| } |
| |
| stream->urb_size = 0; |
| } |
| |
| /* |
| * Allocate transfer buffers. This function can be called with buffers |
| * already allocated when resuming from suspend, in which case it will |
| * return without touching the buffers. |
| * |
| * Limit the buffer size to UVC_MAX_PACKETS bulk/isochronous packets. If the |
| * system is too low on memory try successively smaller numbers of packets |
| * until allocation succeeds. |
| * |
| * Return the number of allocated packets on success or 0 when out of memory. |
| */ |
| static int uvc_alloc_urb_buffers(struct uvc_streaming *stream, |
| unsigned int size, unsigned int psize, gfp_t gfp_flags) |
| { |
| unsigned int npackets; |
| unsigned int i; |
| |
| /* Buffers are already allocated, bail out. */ |
| if (stream->urb_size) |
| return stream->urb_size / psize; |
| |
| /* Compute the number of packets. Bulk endpoints might transfer UVC |
| * payloads accross multiple URBs. |
| */ |
| npackets = DIV_ROUND_UP(size, psize); |
| if (npackets > UVC_MAX_PACKETS) |
| npackets = UVC_MAX_PACKETS; |
| |
| /* Retry allocations until one succeed. */ |
| for (; npackets > 1; npackets /= 2) { |
| for (i = 0; i < UVC_URBS; ++i) { |
| stream->urb_size = psize * npackets; |
| stream->urb_buffer[i] = usb_buffer_alloc( |
| stream->dev->udev, stream->urb_size, |
| gfp_flags | __GFP_NOWARN, &stream->urb_dma[i]); |
| if (!stream->urb_buffer[i]) { |
| uvc_free_urb_buffers(stream); |
| break; |
| } |
| } |
| |
| if (i == UVC_URBS) { |
| uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers " |
| "of %ux%u bytes each.\n", UVC_URBS, npackets, |
| psize); |
| return npackets; |
| } |
| } |
| |
| uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes " |
| "per packet).\n", psize); |
| return 0; |
| } |
| |
| /* |
| * Uninitialize isochronous/bulk URBs and free transfer buffers. |
| */ |
| static void uvc_uninit_video(struct uvc_streaming *stream, int free_buffers) |
| { |
| struct urb *urb; |
| unsigned int i; |
| |
| for (i = 0; i < UVC_URBS; ++i) { |
| urb = stream->urb[i]; |
| if (urb == NULL) |
| continue; |
| |
| usb_kill_urb(urb); |
| usb_free_urb(urb); |
| stream->urb[i] = NULL; |
| } |
| |
| if (free_buffers) |
| uvc_free_urb_buffers(stream); |
| } |
| |
| /* |
| * Initialize isochronous URBs and allocate transfer buffers. The packet size |
| * is given by the endpoint. |
| */ |
| static int uvc_init_video_isoc(struct uvc_streaming *stream, |
| struct usb_host_endpoint *ep, gfp_t gfp_flags) |
| { |
| struct urb *urb; |
| unsigned int npackets, i, j; |
| u16 psize; |
| u32 size; |
| |
| psize = le16_to_cpu(ep->desc.wMaxPacketSize); |
| psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); |
| size = stream->ctrl.dwMaxVideoFrameSize; |
| |
| npackets = uvc_alloc_urb_buffers(stream, size, psize, gfp_flags); |
| if (npackets == 0) |
| return -ENOMEM; |
| |
| size = npackets * psize; |
| |
| for (i = 0; i < UVC_URBS; ++i) { |
| urb = usb_alloc_urb(npackets, gfp_flags); |
| if (urb == NULL) { |
| uvc_uninit_video(stream, 1); |
| return -ENOMEM; |
| } |
| |
| urb->dev = stream->dev->udev; |
| urb->context = stream; |
| urb->pipe = usb_rcvisocpipe(stream->dev->udev, |
| ep->desc.bEndpointAddress); |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| urb->interval = ep->desc.bInterval; |
| urb->transfer_buffer = stream->urb_buffer[i]; |
| urb->transfer_dma = stream->urb_dma[i]; |
| urb->complete = uvc_video_complete; |
| urb->number_of_packets = npackets; |
| urb->transfer_buffer_length = size; |
| |
| for (j = 0; j < npackets; ++j) { |
| urb->iso_frame_desc[j].offset = j * psize; |
| urb->iso_frame_desc[j].length = psize; |
| } |
| |
| stream->urb[i] = urb; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize bulk URBs and allocate transfer buffers. The packet size is |
| * given by the endpoint. |
| */ |
| static int uvc_init_video_bulk(struct uvc_streaming *stream, |
| struct usb_host_endpoint *ep, gfp_t gfp_flags) |
| { |
| struct urb *urb; |
| unsigned int npackets, pipe, i; |
| u16 psize; |
| u32 size; |
| |
| psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff; |
| size = stream->ctrl.dwMaxPayloadTransferSize; |
| stream->bulk.max_payload_size = size; |
| |
| npackets = uvc_alloc_urb_buffers(stream, size, psize, gfp_flags); |
| if (npackets == 0) |
| return -ENOMEM; |
| |
| size = npackets * psize; |
| |
| if (usb_endpoint_dir_in(&ep->desc)) |
| pipe = usb_rcvbulkpipe(stream->dev->udev, |
| ep->desc.bEndpointAddress); |
| else |
| pipe = usb_sndbulkpipe(stream->dev->udev, |
| ep->desc.bEndpointAddress); |
| |
| if (stream->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| size = 0; |
| |
| for (i = 0; i < UVC_URBS; ++i) { |
| urb = usb_alloc_urb(0, gfp_flags); |
| if (urb == NULL) { |
| uvc_uninit_video(stream, 1); |
| return -ENOMEM; |
| } |
| |
| usb_fill_bulk_urb(urb, stream->dev->udev, pipe, |
| stream->urb_buffer[i], size, uvc_video_complete, |
| stream); |
| urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
| urb->transfer_dma = stream->urb_dma[i]; |
| |
| stream->urb[i] = urb; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize isochronous/bulk URBs and allocate transfer buffers. |
| */ |
| static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) |
| { |
| struct usb_interface *intf = stream->intf; |
| struct usb_host_endpoint *ep; |
| unsigned int i; |
| int ret; |
| |
| stream->last_fid = -1; |
| stream->bulk.header_size = 0; |
| stream->bulk.skip_payload = 0; |
| stream->bulk.payload_size = 0; |
| |
| if (intf->num_altsetting > 1) { |
| struct usb_host_endpoint *best_ep = NULL; |
| unsigned int best_psize = 3 * 1024; |
| unsigned int bandwidth; |
| unsigned int uninitialized_var(altsetting); |
| int intfnum = stream->intfnum; |
| |
| /* Isochronous endpoint, select the alternate setting. */ |
| bandwidth = stream->ctrl.dwMaxPayloadTransferSize; |
| |
| if (bandwidth == 0) { |
| uvc_trace(UVC_TRACE_VIDEO, "Device requested null " |
| "bandwidth, defaulting to lowest.\n"); |
| bandwidth = 1; |
| } else { |
| uvc_trace(UVC_TRACE_VIDEO, "Device requested %u " |
| "B/frame bandwidth.\n", bandwidth); |
| } |
| |
| for (i = 0; i < intf->num_altsetting; ++i) { |
| struct usb_host_interface *alts; |
| unsigned int psize; |
| |
| alts = &intf->altsetting[i]; |
| ep = uvc_find_endpoint(alts, |
| stream->header.bEndpointAddress); |
| if (ep == NULL) |
| continue; |
| |
| /* Check if the bandwidth is high enough. */ |
| psize = le16_to_cpu(ep->desc.wMaxPacketSize); |
| psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); |
| if (psize >= bandwidth && psize <= best_psize) { |
| altsetting = i; |
| best_psize = psize; |
| best_ep = ep; |
| } |
| } |
| |
| if (best_ep == NULL) { |
| uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting " |
| "for requested bandwidth.\n"); |
| return -EIO; |
| } |
| |
| uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u " |
| "(%u B/frame bandwidth).\n", altsetting, best_psize); |
| |
| ret = usb_set_interface(stream->dev->udev, intfnum, altsetting); |
| if (ret < 0) |
| return ret; |
| |
| ret = uvc_init_video_isoc(stream, best_ep, gfp_flags); |
| } else { |
| /* Bulk endpoint, proceed to URB initialization. */ |
| ep = uvc_find_endpoint(&intf->altsetting[0], |
| stream->header.bEndpointAddress); |
| if (ep == NULL) |
| return -EIO; |
| |
| ret = uvc_init_video_bulk(stream, ep, gfp_flags); |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| /* Submit the URBs. */ |
| for (i = 0; i < UVC_URBS; ++i) { |
| ret = usb_submit_urb(stream->urb[i], gfp_flags); |
| if (ret < 0) { |
| uvc_printk(KERN_ERR, "Failed to submit URB %u " |
| "(%d).\n", i, ret); |
| uvc_uninit_video(stream, 1); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* -------------------------------------------------------------------------- |
| * Suspend/resume |
| */ |
| |
| /* |
| * Stop streaming without disabling the video queue. |
| * |
| * To let userspace applications resume without trouble, we must not touch the |
| * video buffers in any way. We mark the device as frozen to make sure the URB |
| * completion handler won't try to cancel the queue when we kill the URBs. |
| */ |
| int uvc_video_suspend(struct uvc_streaming *stream) |
| { |
| if (!uvc_queue_streaming(&stream->queue)) |
| return 0; |
| |
| stream->frozen = 1; |
| uvc_uninit_video(stream, 0); |
| usb_set_interface(stream->dev->udev, stream->intfnum, 0); |
| return 0; |
| } |
| |
| /* |
| * Reconfigure the video interface and restart streaming if it was enabled |
| * before suspend. |
| * |
| * If an error occurs, disable the video queue. This will wake all pending |
| * buffers, making sure userspace applications are notified of the problem |
| * instead of waiting forever. |
| */ |
| int uvc_video_resume(struct uvc_streaming *stream) |
| { |
| int ret; |
| |
| stream->frozen = 0; |
| |
| ret = uvc_commit_video(stream, &stream->ctrl); |
| if (ret < 0) { |
| uvc_queue_enable(&stream->queue, 0); |
| return ret; |
| } |
| |
| if (!uvc_queue_streaming(&stream->queue)) |
| return 0; |
| |
| ret = uvc_init_video(stream, GFP_NOIO); |
| if (ret < 0) |
| uvc_queue_enable(&stream->queue, 0); |
| |
| return ret; |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Video device |
| */ |
| |
| /* |
| * Initialize the UVC video device by switching to alternate setting 0 and |
| * retrieve the default format. |
| * |
| * Some cameras (namely the Fuji Finepix) set the format and frame |
| * indexes to zero. The UVC standard doesn't clearly make this a spec |
| * violation, so try to silently fix the values if possible. |
| * |
| * This function is called before registering the device with V4L. |
| */ |
| int uvc_video_init(struct uvc_streaming *stream) |
| { |
| struct uvc_streaming_control *probe = &stream->ctrl; |
| struct uvc_format *format = NULL; |
| struct uvc_frame *frame = NULL; |
| unsigned int i; |
| int ret; |
| |
| if (stream->nformats == 0) { |
| uvc_printk(KERN_INFO, "No supported video formats found.\n"); |
| return -EINVAL; |
| } |
| |
| atomic_set(&stream->active, 0); |
| |
| /* Initialize the video buffers queue. */ |
| uvc_queue_init(&stream->queue, stream->type); |
| |
| /* Alternate setting 0 should be the default, yet the XBox Live Vision |
| * Cam (and possibly other devices) crash or otherwise misbehave if |
| * they don't receive a SET_INTERFACE request before any other video |
| * control request. |
| */ |
| usb_set_interface(stream->dev->udev, stream->intfnum, 0); |
| |
| /* Set the streaming probe control with default streaming parameters |
| * retrieved from the device. Webcams that don't suport GET_DEF |
| * requests on the probe control will just keep their current streaming |
| * parameters. |
| */ |
| if (uvc_get_video_ctrl(stream, probe, 1, UVC_GET_DEF) == 0) |
| uvc_set_video_ctrl(stream, probe, 1); |
| |
| /* Initialize the streaming parameters with the probe control current |
| * value. This makes sure SET_CUR requests on the streaming commit |
| * control will always use values retrieved from a successful GET_CUR |
| * request on the probe control, as required by the UVC specification. |
| */ |
| ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR); |
| if (ret < 0) |
| return ret; |
| |
| /* Check if the default format descriptor exists. Use the first |
| * available format otherwise. |
| */ |
| for (i = stream->nformats; i > 0; --i) { |
| format = &stream->format[i-1]; |
| if (format->index == probe->bFormatIndex) |
| break; |
| } |
| |
| if (format->nframes == 0) { |
| uvc_printk(KERN_INFO, "No frame descriptor found for the " |
| "default format.\n"); |
| return -EINVAL; |
| } |
| |
| /* Zero bFrameIndex might be correct. Stream-based formats (including |
| * MPEG-2 TS and DV) do not support frames but have a dummy frame |
| * descriptor with bFrameIndex set to zero. If the default frame |
| * descriptor is not found, use the first available frame. |
| */ |
| for (i = format->nframes; i > 0; --i) { |
| frame = &format->frame[i-1]; |
| if (frame->bFrameIndex == probe->bFrameIndex) |
| break; |
| } |
| |
| probe->bFormatIndex = format->index; |
| probe->bFrameIndex = frame->bFrameIndex; |
| |
| stream->cur_format = format; |
| stream->cur_frame = frame; |
| |
| /* Select the video decoding function */ |
| if (stream->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| if (stream->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT) |
| stream->decode = uvc_video_decode_isight; |
| else if (stream->intf->num_altsetting > 1) |
| stream->decode = uvc_video_decode_isoc; |
| else |
| stream->decode = uvc_video_decode_bulk; |
| } else { |
| if (stream->intf->num_altsetting == 1) |
| stream->decode = uvc_video_encode_bulk; |
| else { |
| uvc_printk(KERN_INFO, "Isochronous endpoints are not " |
| "supported for video output devices.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Enable or disable the video stream. |
| */ |
| int uvc_video_enable(struct uvc_streaming *stream, int enable) |
| { |
| int ret; |
| |
| if (!enable) { |
| uvc_uninit_video(stream, 1); |
| usb_set_interface(stream->dev->udev, stream->intfnum, 0); |
| uvc_queue_enable(&stream->queue, 0); |
| return 0; |
| } |
| |
| if ((stream->cur_format->flags & UVC_FMT_FLAG_COMPRESSED) || |
| uvc_no_drop_param) |
| stream->queue.flags &= ~UVC_QUEUE_DROP_INCOMPLETE; |
| else |
| stream->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; |
| |
| ret = uvc_queue_enable(&stream->queue, 1); |
| if (ret < 0) |
| return ret; |
| |
| /* Commit the streaming parameters. */ |
| ret = uvc_commit_video(stream, &stream->ctrl); |
| if (ret < 0) |
| return ret; |
| |
| return uvc_init_video(stream, GFP_KERNEL); |
| } |
| |