| /* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ |
| |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_arp.h> |
| #include <net/lib80211.h> |
| |
| #include "hostap_wlan.h" |
| #include "hostap.h" |
| #include "hostap_ap.h" |
| |
| static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| struct iw_statistics *wstats; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| /* Why are we doing that ? Jean II */ |
| if (iface->type != HOSTAP_INTERFACE_MAIN) |
| return NULL; |
| |
| wstats = &local->wstats; |
| |
| wstats->status = 0; |
| wstats->discard.code = |
| local->comm_tallies.rx_discards_wep_undecryptable; |
| wstats->discard.misc = |
| local->comm_tallies.rx_fcs_errors + |
| local->comm_tallies.rx_discards_no_buffer + |
| local->comm_tallies.tx_discards_wrong_sa; |
| |
| wstats->discard.retries = |
| local->comm_tallies.tx_retry_limit_exceeded; |
| wstats->discard.fragment = |
| local->comm_tallies.rx_message_in_bad_msg_fragments; |
| |
| if (local->iw_mode != IW_MODE_MASTER && |
| local->iw_mode != IW_MODE_REPEAT) { |
| int update = 1; |
| #ifdef in_atomic |
| /* RID reading might sleep and it must not be called in |
| * interrupt context or while atomic. However, this |
| * function seems to be called while atomic (at least in Linux |
| * 2.5.59). Update signal quality values only if in suitable |
| * context. Otherwise, previous values read from tick timer |
| * will be used. */ |
| if (in_atomic()) |
| update = 0; |
| #endif /* in_atomic */ |
| |
| if (update && prism2_update_comms_qual(dev) == 0) |
| wstats->qual.updated = IW_QUAL_ALL_UPDATED | |
| IW_QUAL_DBM; |
| |
| wstats->qual.qual = local->comms_qual; |
| wstats->qual.level = local->avg_signal; |
| wstats->qual.noise = local->avg_noise; |
| } else { |
| wstats->qual.qual = 0; |
| wstats->qual.level = 0; |
| wstats->qual.noise = 0; |
| wstats->qual.updated = IW_QUAL_ALL_INVALID; |
| } |
| |
| return wstats; |
| } |
| |
| |
| static int prism2_get_datarates(struct net_device *dev, u8 *rates) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| u8 buf[12]; |
| int len; |
| u16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| len = local->func->get_rid(dev, HFA384X_RID_SUPPORTEDDATARATES, buf, |
| sizeof(buf), 0); |
| if (len < 2) |
| return 0; |
| |
| val = le16_to_cpu(*(__le16 *) buf); /* string length */ |
| |
| if (len - 2 < val || val > 10) |
| return 0; |
| |
| memcpy(rates, buf + 2, val); |
| return val; |
| } |
| |
| |
| static int prism2_get_name(struct net_device *dev, |
| struct iw_request_info *info, |
| char *name, char *extra) |
| { |
| u8 rates[10]; |
| int len, i, over2 = 0; |
| |
| len = prism2_get_datarates(dev, rates); |
| |
| for (i = 0; i < len; i++) { |
| if (rates[i] == 0x0b || rates[i] == 0x16) { |
| over2 = 1; |
| break; |
| } |
| } |
| |
| strcpy(name, over2 ? "IEEE 802.11b" : "IEEE 802.11-DS"); |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwencode(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, char *keybuf) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int i; |
| struct lib80211_crypt_data **crypt; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| i = erq->flags & IW_ENCODE_INDEX; |
| if (i < 1 || i > 4) |
| i = local->crypt_info.tx_keyidx; |
| else |
| i--; |
| if (i < 0 || i >= WEP_KEYS) |
| return -EINVAL; |
| |
| crypt = &local->crypt_info.crypt[i]; |
| |
| if (erq->flags & IW_ENCODE_DISABLED) { |
| if (*crypt) |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); |
| goto done; |
| } |
| |
| if (*crypt != NULL && (*crypt)->ops != NULL && |
| strcmp((*crypt)->ops->name, "WEP") != 0) { |
| /* changing to use WEP; deinit previously used algorithm */ |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); |
| } |
| |
| if (*crypt == NULL) { |
| struct lib80211_crypt_data *new_crypt; |
| |
| /* take WEP into use */ |
| new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), |
| GFP_KERNEL); |
| if (new_crypt == NULL) |
| return -ENOMEM; |
| new_crypt->ops = lib80211_get_crypto_ops("WEP"); |
| if (!new_crypt->ops) { |
| request_module("lib80211_crypt_wep"); |
| new_crypt->ops = lib80211_get_crypto_ops("WEP"); |
| } |
| if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) |
| new_crypt->priv = new_crypt->ops->init(i); |
| if (!new_crypt->ops || !new_crypt->priv) { |
| kfree(new_crypt); |
| new_crypt = NULL; |
| |
| printk(KERN_WARNING "%s: could not initialize WEP: " |
| "load module hostap_crypt_wep.o\n", |
| dev->name); |
| return -EOPNOTSUPP; |
| } |
| *crypt = new_crypt; |
| } |
| |
| if (erq->length > 0) { |
| int len = erq->length <= 5 ? 5 : 13; |
| int first = 1, j; |
| if (len > erq->length) |
| memset(keybuf + erq->length, 0, len - erq->length); |
| (*crypt)->ops->set_key(keybuf, len, NULL, (*crypt)->priv); |
| for (j = 0; j < WEP_KEYS; j++) { |
| if (j != i && local->crypt_info.crypt[j]) { |
| first = 0; |
| break; |
| } |
| } |
| if (first) |
| local->crypt_info.tx_keyidx = i; |
| } else { |
| /* No key data - just set the default TX key index */ |
| local->crypt_info.tx_keyidx = i; |
| } |
| |
| done: |
| local->open_wep = erq->flags & IW_ENCODE_OPEN; |
| |
| if (hostap_set_encryption(local)) { |
| printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name); |
| return -EINVAL; |
| } |
| |
| /* Do not reset port0 if card is in Managed mode since resetting will |
| * generate new IEEE 802.11 authentication which may end up in looping |
| * with IEEE 802.1X. Prism2 documentation seem to require port reset |
| * after WEP configuration. However, keys are apparently changed at |
| * least in Managed mode. */ |
| if (local->iw_mode != IW_MODE_INFRA && local->func->reset_port(dev)) { |
| printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_giwencode(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, char *key) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int i, len; |
| u16 val; |
| struct lib80211_crypt_data *crypt; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| i = erq->flags & IW_ENCODE_INDEX; |
| if (i < 1 || i > 4) |
| i = local->crypt_info.tx_keyidx; |
| else |
| i--; |
| if (i < 0 || i >= WEP_KEYS) |
| return -EINVAL; |
| |
| crypt = local->crypt_info.crypt[i]; |
| erq->flags = i + 1; |
| |
| if (crypt == NULL || crypt->ops == NULL) { |
| erq->length = 0; |
| erq->flags |= IW_ENCODE_DISABLED; |
| return 0; |
| } |
| |
| if (strcmp(crypt->ops->name, "WEP") != 0) { |
| /* only WEP is supported with wireless extensions, so just |
| * report that encryption is used */ |
| erq->length = 0; |
| erq->flags |= IW_ENCODE_ENABLED; |
| return 0; |
| } |
| |
| /* Reads from HFA384X_RID_CNFDEFAULTKEY* return bogus values, so show |
| * the keys from driver buffer */ |
| len = crypt->ops->get_key(key, WEP_KEY_LEN, NULL, crypt->priv); |
| erq->length = (len >= 0 ? len : 0); |
| |
| if (local->func->get_rid(dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, 1) < 0) |
| { |
| printk("CNFWEPFLAGS reading failed\n"); |
| return -EOPNOTSUPP; |
| } |
| le16_to_cpus(&val); |
| if (val & HFA384X_WEPFLAGS_PRIVACYINVOKED) |
| erq->flags |= IW_ENCODE_ENABLED; |
| else |
| erq->flags |= IW_ENCODE_DISABLED; |
| if (val & HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED) |
| erq->flags |= IW_ENCODE_RESTRICTED; |
| else |
| erq->flags |= IW_ENCODE_OPEN; |
| |
| return 0; |
| } |
| |
| |
| static int hostap_set_rate(struct net_device *dev) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int ret, basic_rates; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| basic_rates = local->basic_rates & local->tx_rate_control; |
| if (!basic_rates || basic_rates != local->basic_rates) { |
| printk(KERN_INFO "%s: updating basic rate set automatically " |
| "to match with the new supported rate set\n", |
| dev->name); |
| if (!basic_rates) |
| basic_rates = local->tx_rate_control; |
| |
| local->basic_rates = basic_rates; |
| if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, |
| basic_rates)) |
| printk(KERN_WARNING "%s: failed to set " |
| "cnfBasicRates\n", dev->name); |
| } |
| |
| ret = (hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, |
| local->tx_rate_control) || |
| hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, |
| local->tx_rate_control) || |
| local->func->reset_port(dev)); |
| |
| if (ret) { |
| printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates " |
| "setting to 0x%x failed\n", |
| dev->name, local->tx_rate_control); |
| } |
| |
| /* Update TX rate configuration for all STAs based on new operational |
| * rate set. */ |
| hostap_update_rates(local); |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_siwrate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (rrq->fixed) { |
| switch (rrq->value) { |
| case 11000000: |
| local->tx_rate_control = HFA384X_RATES_11MBPS; |
| break; |
| case 5500000: |
| local->tx_rate_control = HFA384X_RATES_5MBPS; |
| break; |
| case 2000000: |
| local->tx_rate_control = HFA384X_RATES_2MBPS; |
| break; |
| case 1000000: |
| local->tx_rate_control = HFA384X_RATES_1MBPS; |
| break; |
| default: |
| local->tx_rate_control = HFA384X_RATES_1MBPS | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | |
| HFA384X_RATES_11MBPS; |
| break; |
| } |
| } else { |
| switch (rrq->value) { |
| case 11000000: |
| local->tx_rate_control = HFA384X_RATES_1MBPS | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | |
| HFA384X_RATES_11MBPS; |
| break; |
| case 5500000: |
| local->tx_rate_control = HFA384X_RATES_1MBPS | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS; |
| break; |
| case 2000000: |
| local->tx_rate_control = HFA384X_RATES_1MBPS | |
| HFA384X_RATES_2MBPS; |
| break; |
| case 1000000: |
| local->tx_rate_control = HFA384X_RATES_1MBPS; |
| break; |
| default: |
| local->tx_rate_control = HFA384X_RATES_1MBPS | |
| HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | |
| HFA384X_RATES_11MBPS; |
| break; |
| } |
| } |
| |
| return hostap_set_rate(dev); |
| } |
| |
| |
| static int prism2_ioctl_giwrate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| u16 val; |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int ret = 0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->get_rid(dev, HFA384X_RID_TXRATECONTROL, &val, 2, 1) < |
| 0) |
| return -EINVAL; |
| |
| if ((val & 0x1) && (val > 1)) |
| rrq->fixed = 0; |
| else |
| rrq->fixed = 1; |
| |
| if (local->iw_mode == IW_MODE_MASTER && local->ap != NULL && |
| !local->fw_tx_rate_control) { |
| /* HFA384X_RID_CURRENTTXRATE seems to always be 2 Mbps in |
| * Host AP mode, so use the recorded TX rate of the last sent |
| * frame */ |
| rrq->value = local->ap->last_tx_rate > 0 ? |
| local->ap->last_tx_rate * 100000 : 11000000; |
| return 0; |
| } |
| |
| if (local->func->get_rid(dev, HFA384X_RID_CURRENTTXRATE, &val, 2, 1) < |
| 0) |
| return -EINVAL; |
| |
| switch (val) { |
| case HFA384X_RATES_1MBPS: |
| rrq->value = 1000000; |
| break; |
| case HFA384X_RATES_2MBPS: |
| rrq->value = 2000000; |
| break; |
| case HFA384X_RATES_5MBPS: |
| rrq->value = 5500000; |
| break; |
| case HFA384X_RATES_11MBPS: |
| rrq->value = 11000000; |
| break; |
| default: |
| /* should not happen */ |
| rrq->value = 11000000; |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_siwsens(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *sens, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| /* Set the desired AP density */ |
| if (sens->value < 1 || sens->value > 3) |
| return -EINVAL; |
| |
| if (hostap_set_word(dev, HFA384X_RID_CNFSYSTEMSCALE, sens->value) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int prism2_ioctl_giwsens(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *sens, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| /* Get the current AP density */ |
| if (local->func->get_rid(dev, HFA384X_RID_CNFSYSTEMSCALE, &val, 2, 1) < |
| 0) |
| return -EINVAL; |
| |
| sens->value = le16_to_cpu(val); |
| sens->fixed = 1; |
| |
| return 0; |
| } |
| |
| |
| /* Deprecated in new wireless extension API */ |
| static int prism2_ioctl_giwaplist(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| struct sockaddr *addr; |
| struct iw_quality *qual; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->iw_mode != IW_MODE_MASTER) { |
| printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported " |
| "in Host AP mode\n"); |
| data->length = 0; |
| return -EOPNOTSUPP; |
| } |
| |
| addr = kmalloc(sizeof(struct sockaddr) * IW_MAX_AP, GFP_KERNEL); |
| qual = kmalloc(sizeof(struct iw_quality) * IW_MAX_AP, GFP_KERNEL); |
| if (addr == NULL || qual == NULL) { |
| kfree(addr); |
| kfree(qual); |
| data->length = 0; |
| return -ENOMEM; |
| } |
| |
| data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1); |
| |
| memcpy(extra, &addr, sizeof(struct sockaddr) * data->length); |
| data->flags = 1; /* has quality information */ |
| memcpy(extra + sizeof(struct sockaddr) * data->length, &qual, |
| sizeof(struct iw_quality) * data->length); |
| |
| kfree(addr); |
| kfree(qual); |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwrts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rts, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (rts->disabled) |
| val = cpu_to_le16(2347); |
| else if (rts->value < 0 || rts->value > 2347) |
| return -EINVAL; |
| else |
| val = cpu_to_le16(rts->value); |
| |
| if (local->func->set_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| local->rts_threshold = rts->value; |
| |
| return 0; |
| } |
| |
| static int prism2_ioctl_giwrts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rts, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->get_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2, 1) < |
| 0) |
| return -EINVAL; |
| |
| rts->value = le16_to_cpu(val); |
| rts->disabled = (rts->value == 2347); |
| rts->fixed = 1; |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwfrag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rts, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (rts->disabled) |
| val = cpu_to_le16(2346); |
| else if (rts->value < 256 || rts->value > 2346) |
| return -EINVAL; |
| else |
| val = cpu_to_le16(rts->value & ~0x1); /* even numbers only */ |
| |
| local->fragm_threshold = rts->value & ~0x1; |
| if (local->func->set_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, &val, |
| 2) |
| || local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int prism2_ioctl_giwfrag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rts, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->get_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, |
| &val, 2, 1) < 0) |
| return -EINVAL; |
| |
| rts->value = le16_to_cpu(val); |
| rts->disabled = (rts->value == 2346); |
| rts->fixed = 1; |
| |
| return 0; |
| } |
| |
| |
| #ifndef PRISM2_NO_STATION_MODES |
| static int hostap_join_ap(struct net_device *dev) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| struct hfa384x_join_request req; |
| unsigned long flags; |
| int i; |
| struct hfa384x_hostscan_result *entry; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| memcpy(req.bssid, local->preferred_ap, ETH_ALEN); |
| req.channel = 0; |
| |
| spin_lock_irqsave(&local->lock, flags); |
| for (i = 0; i < local->last_scan_results_count; i++) { |
| if (!local->last_scan_results) |
| break; |
| entry = &local->last_scan_results[i]; |
| if (memcmp(local->preferred_ap, entry->bssid, ETH_ALEN) == 0) { |
| req.channel = entry->chid; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&local->lock, flags); |
| |
| if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, |
| sizeof(req))) { |
| printk(KERN_DEBUG "%s: JoinRequest %pM failed\n", |
| dev->name, local->preferred_ap); |
| return -1; |
| } |
| |
| printk(KERN_DEBUG "%s: Trying to join BSSID %pM\n", |
| dev->name, local->preferred_ap); |
| |
| return 0; |
| } |
| #endif /* PRISM2_NO_STATION_MODES */ |
| |
| |
| static int prism2_ioctl_siwap(struct net_device *dev, |
| struct iw_request_info *info, |
| struct sockaddr *ap_addr, char *extra) |
| { |
| #ifdef PRISM2_NO_STATION_MODES |
| return -EOPNOTSUPP; |
| #else /* PRISM2_NO_STATION_MODES */ |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| memcpy(local->preferred_ap, &ap_addr->sa_data, ETH_ALEN); |
| |
| if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) { |
| struct hfa384x_scan_request scan_req; |
| memset(&scan_req, 0, sizeof(scan_req)); |
| scan_req.channel_list = cpu_to_le16(0x3fff); |
| scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); |
| if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, |
| &scan_req, sizeof(scan_req))) { |
| printk(KERN_DEBUG "%s: ScanResults request failed - " |
| "preferred AP delayed to next unsolicited " |
| "scan\n", dev->name); |
| } |
| } else if (local->host_roaming == 2 && |
| local->iw_mode == IW_MODE_INFRA) { |
| if (hostap_join_ap(dev)) |
| return -EINVAL; |
| } else { |
| printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only " |
| "in Managed mode when host_roaming is enabled\n", |
| dev->name); |
| } |
| |
| return 0; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| } |
| |
| static int prism2_ioctl_giwap(struct net_device *dev, |
| struct iw_request_info *info, |
| struct sockaddr *ap_addr, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| ap_addr->sa_family = ARPHRD_ETHER; |
| switch (iface->type) { |
| case HOSTAP_INTERFACE_AP: |
| memcpy(&ap_addr->sa_data, dev->dev_addr, ETH_ALEN); |
| break; |
| case HOSTAP_INTERFACE_STA: |
| memcpy(&ap_addr->sa_data, local->assoc_ap_addr, ETH_ALEN); |
| break; |
| case HOSTAP_INTERFACE_WDS: |
| memcpy(&ap_addr->sa_data, iface->u.wds.remote_addr, ETH_ALEN); |
| break; |
| default: |
| if (local->func->get_rid(dev, HFA384X_RID_CURRENTBSSID, |
| &ap_addr->sa_data, ETH_ALEN, 1) < 0) |
| return -EOPNOTSUPP; |
| |
| /* local->bssid is also updated in LinkStatus handler when in |
| * station mode */ |
| memcpy(local->bssid, &ap_addr->sa_data, ETH_ALEN); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwnickn(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *nickname) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| memset(local->name, 0, sizeof(local->name)); |
| memcpy(local->name, nickname, data->length); |
| local->name_set = 1; |
| |
| if (hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, local->name) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int prism2_ioctl_giwnickn(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *nickname) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int len; |
| char name[MAX_NAME_LEN + 3]; |
| u16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| len = local->func->get_rid(dev, HFA384X_RID_CNFOWNNAME, |
| &name, MAX_NAME_LEN + 2, 0); |
| val = le16_to_cpu(*(__le16 *) name); |
| if (len > MAX_NAME_LEN + 2 || len < 0 || val > MAX_NAME_LEN) |
| return -EOPNOTSUPP; |
| |
| name[val + 2] = '\0'; |
| data->length = val + 1; |
| memcpy(nickname, name + 2, val + 1); |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwfreq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *freq, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| /* freq => chan. */ |
| if (freq->e == 1 && |
| freq->m / 100000 >= freq_list[0] && |
| freq->m / 100000 <= freq_list[FREQ_COUNT - 1]) { |
| int ch; |
| int fr = freq->m / 100000; |
| for (ch = 0; ch < FREQ_COUNT; ch++) { |
| if (fr == freq_list[ch]) { |
| freq->e = 0; |
| freq->m = ch + 1; |
| break; |
| } |
| } |
| } |
| |
| if (freq->e != 0 || freq->m < 1 || freq->m > FREQ_COUNT || |
| !(local->channel_mask & (1 << (freq->m - 1)))) |
| return -EINVAL; |
| |
| local->channel = freq->m; /* channel is used in prism2_setup_rids() */ |
| if (hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int prism2_ioctl_giwfreq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *freq, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| u16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->get_rid(dev, HFA384X_RID_CURRENTCHANNEL, &val, 2, 1) < |
| 0) |
| return -EINVAL; |
| |
| le16_to_cpus(&val); |
| if (val < 1 || val > FREQ_COUNT) |
| return -EINVAL; |
| |
| freq->m = freq_list[val - 1] * 100000; |
| freq->e = 1; |
| |
| return 0; |
| } |
| |
| |
| static void hostap_monitor_set_type(local_info_t *local) |
| { |
| struct net_device *dev = local->ddev; |
| |
| if (dev == NULL) |
| return; |
| |
| if (local->monitor_type == PRISM2_MONITOR_PRISM || |
| local->monitor_type == PRISM2_MONITOR_CAPHDR) { |
| dev->type = ARPHRD_IEEE80211_PRISM; |
| } else if (local->monitor_type == PRISM2_MONITOR_RADIOTAP) { |
| dev->type = ARPHRD_IEEE80211_RADIOTAP; |
| } else { |
| dev->type = ARPHRD_IEEE80211; |
| } |
| } |
| |
| |
| static int prism2_ioctl_siwessid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *ssid) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (iface->type == HOSTAP_INTERFACE_WDS) |
| return -EOPNOTSUPP; |
| |
| if (data->flags == 0) |
| ssid[0] = '\0'; /* ANY */ |
| |
| if (local->iw_mode == IW_MODE_MASTER && ssid[0] == '\0') { |
| /* Setting SSID to empty string seems to kill the card in |
| * Host AP mode */ |
| printk(KERN_DEBUG "%s: Host AP mode does not support " |
| "'Any' essid\n", dev->name); |
| return -EINVAL; |
| } |
| |
| memcpy(local->essid, ssid, data->length); |
| local->essid[data->length] = '\0'; |
| |
| if ((!local->fw_ap && |
| hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, local->essid)) |
| || hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, local->essid) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int prism2_ioctl_giwessid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *essid) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| u16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (iface->type == HOSTAP_INTERFACE_WDS) |
| return -EOPNOTSUPP; |
| |
| data->flags = 1; /* active */ |
| if (local->iw_mode == IW_MODE_MASTER) { |
| data->length = strlen(local->essid); |
| memcpy(essid, local->essid, IW_ESSID_MAX_SIZE); |
| } else { |
| int len; |
| char ssid[MAX_SSID_LEN + 2]; |
| memset(ssid, 0, sizeof(ssid)); |
| len = local->func->get_rid(dev, HFA384X_RID_CURRENTSSID, |
| &ssid, MAX_SSID_LEN + 2, 0); |
| val = le16_to_cpu(*(__le16 *) ssid); |
| if (len > MAX_SSID_LEN + 2 || len < 0 || val > MAX_SSID_LEN) { |
| return -EOPNOTSUPP; |
| } |
| data->length = val; |
| memcpy(essid, ssid + 2, IW_ESSID_MAX_SIZE); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_giwrange(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| struct iw_range *range = (struct iw_range *) extra; |
| u8 rates[10]; |
| u16 val; |
| int i, len, over2; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| data->length = sizeof(struct iw_range); |
| memset(range, 0, sizeof(struct iw_range)); |
| |
| /* TODO: could fill num_txpower and txpower array with |
| * something; however, there are 128 different values.. */ |
| |
| range->txpower_capa = IW_TXPOW_DBM; |
| |
| if (local->iw_mode == IW_MODE_INFRA || local->iw_mode == IW_MODE_ADHOC) |
| { |
| range->min_pmp = 1 * 1024; |
| range->max_pmp = 65535 * 1024; |
| range->min_pmt = 1 * 1024; |
| range->max_pmt = 1000 * 1024; |
| range->pmp_flags = IW_POWER_PERIOD; |
| range->pmt_flags = IW_POWER_TIMEOUT; |
| range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | |
| IW_POWER_UNICAST_R | IW_POWER_ALL_R; |
| } |
| |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 18; |
| |
| range->retry_capa = IW_RETRY_LIMIT; |
| range->retry_flags = IW_RETRY_LIMIT; |
| range->min_retry = 0; |
| range->max_retry = 255; |
| |
| range->num_channels = FREQ_COUNT; |
| |
| val = 0; |
| for (i = 0; i < FREQ_COUNT; i++) { |
| if (local->channel_mask & (1 << i)) { |
| range->freq[val].i = i + 1; |
| range->freq[val].m = freq_list[i] * 100000; |
| range->freq[val].e = 1; |
| val++; |
| } |
| if (val == IW_MAX_FREQUENCIES) |
| break; |
| } |
| range->num_frequency = val; |
| |
| if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { |
| range->max_qual.qual = 70; /* what is correct max? This was not |
| * documented exactly. At least |
| * 69 has been observed. */ |
| range->max_qual.level = 0; /* dB */ |
| range->max_qual.noise = 0; /* dB */ |
| |
| /* What would be suitable values for "average/typical" qual? */ |
| range->avg_qual.qual = 20; |
| range->avg_qual.level = -60; |
| range->avg_qual.noise = -95; |
| } else { |
| range->max_qual.qual = 92; /* 0 .. 92 */ |
| range->max_qual.level = 154; /* 27 .. 154 */ |
| range->max_qual.noise = 154; /* 27 .. 154 */ |
| } |
| range->sensitivity = 3; |
| |
| range->max_encoding_tokens = WEP_KEYS; |
| range->num_encoding_sizes = 2; |
| range->encoding_size[0] = 5; |
| range->encoding_size[1] = 13; |
| |
| over2 = 0; |
| len = prism2_get_datarates(dev, rates); |
| range->num_bitrates = 0; |
| for (i = 0; i < len; i++) { |
| if (range->num_bitrates < IW_MAX_BITRATES) { |
| range->bitrate[range->num_bitrates] = |
| rates[i] * 500000; |
| range->num_bitrates++; |
| } |
| if (rates[i] == 0x0b || rates[i] == 0x16) |
| over2 = 1; |
| } |
| /* estimated maximum TCP throughput values (bps) */ |
| range->throughput = over2 ? 5500000 : 1500000; |
| |
| range->min_rts = 0; |
| range->max_rts = 2347; |
| range->min_frag = 256; |
| range->max_frag = 2346; |
| |
| /* Event capability (kernel + driver) */ |
| range->event_capa[0] = (IW_EVENT_CAPA_K_0 | |
| IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | |
| IW_EVENT_CAPA_MASK(SIOCGIWAP) | |
| IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); |
| range->event_capa[1] = IW_EVENT_CAPA_K_1; |
| range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVTXDROP) | |
| IW_EVENT_CAPA_MASK(IWEVCUSTOM) | |
| IW_EVENT_CAPA_MASK(IWEVREGISTERED) | |
| IW_EVENT_CAPA_MASK(IWEVEXPIRED)); |
| |
| range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | |
| IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; |
| |
| if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) |
| range->scan_capa = IW_SCAN_CAPA_ESSID; |
| |
| return 0; |
| } |
| |
| |
| static int hostap_monitor_mode_enable(local_info_t *local) |
| { |
| struct net_device *dev = local->dev; |
| |
| printk(KERN_DEBUG "Enabling monitor mode\n"); |
| hostap_monitor_set_type(local); |
| |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, |
| HFA384X_PORTTYPE_PSEUDO_IBSS)) { |
| printk(KERN_DEBUG "Port type setting for monitor mode " |
| "failed\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| /* Host decrypt is needed to get the IV and ICV fields; |
| * however, monitor mode seems to remove WEP flag from frame |
| * control field */ |
| if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, |
| HFA384X_WEPFLAGS_HOSTENCRYPT | |
| HFA384X_WEPFLAGS_HOSTDECRYPT)) { |
| printk(KERN_DEBUG "WEP flags setting failed\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (local->func->reset_port(dev) || |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | |
| (HFA384X_TEST_MONITOR << 8), |
| 0, NULL, NULL)) { |
| printk(KERN_DEBUG "Setting monitor mode failed\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int hostap_monitor_mode_disable(local_info_t *local) |
| { |
| struct net_device *dev = local->ddev; |
| |
| if (dev == NULL) |
| return -1; |
| |
| printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name); |
| dev->type = ARPHRD_ETHER; |
| |
| if (local->func->cmd(dev, HFA384X_CMDCODE_TEST | |
| (HFA384X_TEST_STOP << 8), |
| 0, NULL, NULL)) |
| return -1; |
| return hostap_set_encryption(local); |
| } |
| |
| |
| static int prism2_ioctl_siwmode(struct net_device *dev, |
| struct iw_request_info *info, |
| __u32 *mode, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int double_reset = 0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA && |
| *mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT && |
| *mode != IW_MODE_MONITOR) |
| return -EOPNOTSUPP; |
| |
| #ifdef PRISM2_NO_STATION_MODES |
| if (*mode == IW_MODE_ADHOC || *mode == IW_MODE_INFRA) |
| return -EOPNOTSUPP; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| |
| if (*mode == local->iw_mode) |
| return 0; |
| |
| if (*mode == IW_MODE_MASTER && local->essid[0] == '\0') { |
| printk(KERN_WARNING "%s: empty SSID not allowed in Master " |
| "mode\n", dev->name); |
| return -EINVAL; |
| } |
| |
| if (local->iw_mode == IW_MODE_MONITOR) |
| hostap_monitor_mode_disable(local); |
| |
| if ((local->iw_mode == IW_MODE_ADHOC || |
| local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) { |
| /* There seems to be a firmware bug in at least STA f/w v1.5.6 |
| * that leaves beacon frames to use IBSS type when moving from |
| * IBSS to Host AP mode. Doing double Port0 reset seems to be |
| * enough to workaround this. */ |
| double_reset = 1; |
| } |
| |
| printk(KERN_DEBUG "prism2: %s: operating mode changed " |
| "%d -> %d\n", dev->name, local->iw_mode, *mode); |
| local->iw_mode = *mode; |
| |
| if (local->iw_mode == IW_MODE_MONITOR) |
| hostap_monitor_mode_enable(local); |
| else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && |
| !local->fw_encrypt_ok) { |
| printk(KERN_DEBUG "%s: defaulting to host-based encryption as " |
| "a workaround for firmware bug in Host AP mode WEP\n", |
| dev->name); |
| local->host_encrypt = 1; |
| } |
| |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, |
| hostap_get_porttype(local))) |
| return -EOPNOTSUPP; |
| |
| if (local->func->reset_port(dev)) |
| return -EINVAL; |
| if (double_reset && local->func->reset_port(dev)) |
| return -EINVAL; |
| |
| if (local->iw_mode != IW_MODE_INFRA && local->iw_mode != IW_MODE_ADHOC) |
| { |
| /* netif_carrier is used only in client modes for now, so make |
| * sure carrier is on when moving to non-client modes. */ |
| netif_carrier_on(local->dev); |
| netif_carrier_on(local->ddev); |
| } |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_giwmode(struct net_device *dev, |
| struct iw_request_info *info, |
| __u32 *mode, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| switch (iface->type) { |
| case HOSTAP_INTERFACE_STA: |
| *mode = IW_MODE_INFRA; |
| break; |
| case HOSTAP_INTERFACE_WDS: |
| *mode = IW_MODE_REPEAT; |
| break; |
| default: |
| *mode = local->iw_mode; |
| break; |
| } |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwpower(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *wrq, char *extra) |
| { |
| #ifdef PRISM2_NO_STATION_MODES |
| return -EOPNOTSUPP; |
| #else /* PRISM2_NO_STATION_MODES */ |
| int ret = 0; |
| |
| if (wrq->disabled) |
| return hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 0); |
| |
| switch (wrq->flags & IW_POWER_MODE) { |
| case IW_POWER_UNICAST_R: |
| ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 0); |
| if (ret) |
| return ret; |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); |
| if (ret) |
| return ret; |
| break; |
| case IW_POWER_ALL_R: |
| ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 1); |
| if (ret) |
| return ret; |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); |
| if (ret) |
| return ret; |
| break; |
| case IW_POWER_ON: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (wrq->flags & IW_POWER_TIMEOUT) { |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); |
| if (ret) |
| return ret; |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMHOLDOVERDURATION, |
| wrq->value / 1024); |
| if (ret) |
| return ret; |
| } |
| if (wrq->flags & IW_POWER_PERIOD) { |
| ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); |
| if (ret) |
| return ret; |
| ret = hostap_set_word(dev, HFA384X_RID_CNFMAXSLEEPDURATION, |
| wrq->value / 1024); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| } |
| |
| |
| static int prism2_ioctl_giwpower(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| #ifdef PRISM2_NO_STATION_MODES |
| return -EOPNOTSUPP; |
| #else /* PRISM2_NO_STATION_MODES */ |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 enable, mcast; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->get_rid(dev, HFA384X_RID_CNFPMENABLED, &enable, 2, 1) |
| < 0) |
| return -EINVAL; |
| |
| if (!le16_to_cpu(enable)) { |
| rrq->disabled = 1; |
| return 0; |
| } |
| |
| rrq->disabled = 0; |
| |
| if ((rrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { |
| __le16 timeout; |
| if (local->func->get_rid(dev, |
| HFA384X_RID_CNFPMHOLDOVERDURATION, |
| &timeout, 2, 1) < 0) |
| return -EINVAL; |
| |
| rrq->flags = IW_POWER_TIMEOUT; |
| rrq->value = le16_to_cpu(timeout) * 1024; |
| } else { |
| __le16 period; |
| if (local->func->get_rid(dev, HFA384X_RID_CNFMAXSLEEPDURATION, |
| &period, 2, 1) < 0) |
| return -EINVAL; |
| |
| rrq->flags = IW_POWER_PERIOD; |
| rrq->value = le16_to_cpu(period) * 1024; |
| } |
| |
| if (local->func->get_rid(dev, HFA384X_RID_CNFMULTICASTRECEIVE, &mcast, |
| 2, 1) < 0) |
| return -EINVAL; |
| |
| if (le16_to_cpu(mcast)) |
| rrq->flags |= IW_POWER_ALL_R; |
| else |
| rrq->flags |= IW_POWER_UNICAST_R; |
| |
| return 0; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| } |
| |
| |
| static int prism2_ioctl_siwretry(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (rrq->disabled) |
| return -EINVAL; |
| |
| /* setting retry limits is not supported with the current station |
| * firmware code; simulate this with alternative retry count for now */ |
| if (rrq->flags == IW_RETRY_LIMIT) { |
| if (rrq->value < 0) { |
| /* disable manual retry count setting and use firmware |
| * defaults */ |
| local->manual_retry_count = -1; |
| local->tx_control &= ~HFA384X_TX_CTRL_ALT_RTRY; |
| } else { |
| if (hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, |
| rrq->value)) { |
| printk(KERN_DEBUG "%s: Alternate retry count " |
| "setting to %d failed\n", |
| dev->name, rrq->value); |
| return -EOPNOTSUPP; |
| } |
| |
| local->manual_retry_count = rrq->value; |
| local->tx_control |= HFA384X_TX_CTRL_ALT_RTRY; |
| } |
| return 0; |
| } |
| |
| return -EOPNOTSUPP; |
| |
| #if 0 |
| /* what could be done, if firmware would support this.. */ |
| |
| if (rrq->flags & IW_RETRY_LIMIT) { |
| if (rrq->flags & IW_RETRY_LONG) |
| HFA384X_RID_LONGRETRYLIMIT = rrq->value; |
| else if (rrq->flags & IW_RETRY_SHORT) |
| HFA384X_RID_SHORTRETRYLIMIT = rrq->value; |
| else { |
| HFA384X_RID_LONGRETRYLIMIT = rrq->value; |
| HFA384X_RID_SHORTRETRYLIMIT = rrq->value; |
| } |
| |
| } |
| |
| if (rrq->flags & IW_RETRY_LIFETIME) { |
| HFA384X_RID_MAXTRANSMITLIFETIME = rrq->value / 1024; |
| } |
| |
| return 0; |
| #endif /* 0 */ |
| } |
| |
| static int prism2_ioctl_giwretry(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| __le16 shortretry, longretry, lifetime, altretry; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->get_rid(dev, HFA384X_RID_SHORTRETRYLIMIT, &shortretry, |
| 2, 1) < 0 || |
| local->func->get_rid(dev, HFA384X_RID_LONGRETRYLIMIT, &longretry, |
| 2, 1) < 0 || |
| local->func->get_rid(dev, HFA384X_RID_MAXTRANSMITLIFETIME, |
| &lifetime, 2, 1) < 0) |
| return -EINVAL; |
| |
| rrq->disabled = 0; |
| |
| if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { |
| rrq->flags = IW_RETRY_LIFETIME; |
| rrq->value = le16_to_cpu(lifetime) * 1024; |
| } else { |
| if (local->manual_retry_count >= 0) { |
| rrq->flags = IW_RETRY_LIMIT; |
| if (local->func->get_rid(dev, |
| HFA384X_RID_CNFALTRETRYCOUNT, |
| &altretry, 2, 1) >= 0) |
| rrq->value = le16_to_cpu(altretry); |
| else |
| rrq->value = local->manual_retry_count; |
| } else if ((rrq->flags & IW_RETRY_LONG)) { |
| rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; |
| rrq->value = le16_to_cpu(longretry); |
| } else { |
| rrq->flags = IW_RETRY_LIMIT; |
| rrq->value = le16_to_cpu(shortretry); |
| if (shortretry != longretry) |
| rrq->flags |= IW_RETRY_SHORT; |
| } |
| } |
| return 0; |
| } |
| |
| |
| /* Note! This TX power controlling is experimental and should not be used in |
| * production use. It just sets raw power register and does not use any kind of |
| * feedback information from the measured TX power (CR58). This is now |
| * commented out to make sure that it is not used by accident. TX power |
| * configuration will be enabled again after proper algorithm using feedback |
| * has been implemented. */ |
| |
| #ifdef RAW_TXPOWER_SETTING |
| /* Map HFA386x's CR31 to and from dBm with some sort of ad hoc mapping.. |
| * This version assumes following mapping: |
| * CR31 is 7-bit value with -64 to +63 range. |
| * -64 is mapped into +20dBm and +63 into -43dBm. |
| * This is certainly not an exact mapping for every card, but at least |
| * increasing dBm value should correspond to increasing TX power. |
| */ |
| |
| static int prism2_txpower_hfa386x_to_dBm(u16 val) |
| { |
| signed char tmp; |
| |
| if (val > 255) |
| val = 255; |
| |
| tmp = val; |
| tmp >>= 2; |
| |
| return -12 - tmp; |
| } |
| |
| static u16 prism2_txpower_dBm_to_hfa386x(int val) |
| { |
| signed char tmp; |
| |
| if (val > 20) |
| return 128; |
| else if (val < -43) |
| return 127; |
| |
| tmp = val; |
| tmp = -12 - tmp; |
| tmp <<= 2; |
| |
| return (unsigned char) tmp; |
| } |
| #endif /* RAW_TXPOWER_SETTING */ |
| |
| |
| static int prism2_ioctl_siwtxpow(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| #ifdef RAW_TXPOWER_SETTING |
| char *tmp; |
| #endif |
| u16 val; |
| int ret = 0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (rrq->disabled) { |
| if (local->txpower_type != PRISM2_TXPOWER_OFF) { |
| val = 0xff; /* use all standby and sleep modes */ |
| ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, |
| HFA386X_CR_A_D_TEST_MODES2, |
| &val, NULL); |
| printk(KERN_DEBUG "%s: Turning radio off: %s\n", |
| dev->name, ret ? "failed" : "OK"); |
| local->txpower_type = PRISM2_TXPOWER_OFF; |
| } |
| return (ret ? -EOPNOTSUPP : 0); |
| } |
| |
| if (local->txpower_type == PRISM2_TXPOWER_OFF) { |
| val = 0; /* disable all standby and sleep modes */ |
| ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, |
| HFA386X_CR_A_D_TEST_MODES2, &val, NULL); |
| printk(KERN_DEBUG "%s: Turning radio on: %s\n", |
| dev->name, ret ? "failed" : "OK"); |
| local->txpower_type = PRISM2_TXPOWER_UNKNOWN; |
| } |
| |
| #ifdef RAW_TXPOWER_SETTING |
| if (!rrq->fixed && local->txpower_type != PRISM2_TXPOWER_AUTO) { |
| printk(KERN_DEBUG "Setting ALC on\n"); |
| val = HFA384X_TEST_CFG_BIT_ALC; |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | |
| (HFA384X_TEST_CFG_BITS << 8), 1, &val, NULL); |
| local->txpower_type = PRISM2_TXPOWER_AUTO; |
| return 0; |
| } |
| |
| if (local->txpower_type != PRISM2_TXPOWER_FIXED) { |
| printk(KERN_DEBUG "Setting ALC off\n"); |
| val = HFA384X_TEST_CFG_BIT_ALC; |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | |
| (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL); |
| local->txpower_type = PRISM2_TXPOWER_FIXED; |
| } |
| |
| if (rrq->flags == IW_TXPOW_DBM) |
| tmp = "dBm"; |
| else if (rrq->flags == IW_TXPOW_MWATT) |
| tmp = "mW"; |
| else |
| tmp = "UNKNOWN"; |
| printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp); |
| |
| if (rrq->flags != IW_TXPOW_DBM) { |
| printk("SIOCSIWTXPOW with mW is not supported; use dBm\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| local->txpower = rrq->value; |
| val = prism2_txpower_dBm_to_hfa386x(local->txpower); |
| if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, |
| HFA386X_CR_MANUAL_TX_POWER, &val, NULL)) |
| ret = -EOPNOTSUPP; |
| #else /* RAW_TXPOWER_SETTING */ |
| if (rrq->fixed) |
| ret = -EOPNOTSUPP; |
| #endif /* RAW_TXPOWER_SETTING */ |
| |
| return ret; |
| } |
| |
| static int prism2_ioctl_giwtxpow(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| #ifdef RAW_TXPOWER_SETTING |
| struct hostap_interface *iface; |
| local_info_t *local; |
| u16 resp0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| rrq->flags = IW_TXPOW_DBM; |
| rrq->disabled = 0; |
| rrq->fixed = 0; |
| |
| if (local->txpower_type == PRISM2_TXPOWER_AUTO) { |
| if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, |
| HFA386X_CR_MANUAL_TX_POWER, |
| NULL, &resp0) == 0) { |
| rrq->value = prism2_txpower_hfa386x_to_dBm(resp0); |
| } else { |
| /* Could not get real txpower; guess 15 dBm */ |
| rrq->value = 15; |
| } |
| } else if (local->txpower_type == PRISM2_TXPOWER_OFF) { |
| rrq->value = 0; |
| rrq->disabled = 1; |
| } else if (local->txpower_type == PRISM2_TXPOWER_FIXED) { |
| rrq->value = local->txpower; |
| rrq->fixed = 1; |
| } else { |
| printk("SIOCGIWTXPOW - unknown txpower_type=%d\n", |
| local->txpower_type); |
| } |
| return 0; |
| #else /* RAW_TXPOWER_SETTING */ |
| return -EOPNOTSUPP; |
| #endif /* RAW_TXPOWER_SETTING */ |
| } |
| |
| |
| #ifndef PRISM2_NO_STATION_MODES |
| |
| /* HostScan request works with and without host_roaming mode. In addition, it |
| * does not break current association. However, it requires newer station |
| * firmware version (>= 1.3.1) than scan request. */ |
| static int prism2_request_hostscan(struct net_device *dev, |
| u8 *ssid, u8 ssid_len) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| struct hfa384x_hostscan_request scan_req; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| memset(&scan_req, 0, sizeof(scan_req)); |
| scan_req.channel_list = cpu_to_le16(local->channel_mask & |
| local->scan_channel_mask); |
| scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); |
| if (ssid) { |
| if (ssid_len > 32) |
| return -EINVAL; |
| scan_req.target_ssid_len = cpu_to_le16(ssid_len); |
| memcpy(scan_req.target_ssid, ssid, ssid_len); |
| } |
| |
| if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, |
| sizeof(scan_req))) { |
| printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| |
| static int prism2_request_scan(struct net_device *dev) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| struct hfa384x_scan_request scan_req; |
| int ret = 0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| memset(&scan_req, 0, sizeof(scan_req)); |
| scan_req.channel_list = cpu_to_le16(local->channel_mask & |
| local->scan_channel_mask); |
| scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); |
| |
| /* FIX: |
| * It seems to be enough to set roaming mode for a short moment to |
| * host-based and then setup scanrequest data and return the mode to |
| * firmware-based. |
| * |
| * Master mode would need to drop to Managed mode for a short while |
| * to make scanning work.. Or sweep through the different channels and |
| * use passive scan based on beacons. */ |
| |
| if (!local->host_roaming) |
| hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, |
| HFA384X_ROAMING_HOST); |
| |
| if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, &scan_req, |
| sizeof(scan_req))) { |
| printk(KERN_DEBUG "SCANREQUEST failed\n"); |
| ret = -EINVAL; |
| } |
| |
| if (!local->host_roaming) |
| hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, |
| HFA384X_ROAMING_FIRMWARE); |
| |
| return 0; |
| } |
| |
| #else /* !PRISM2_NO_STATION_MODES */ |
| |
| static inline int prism2_request_hostscan(struct net_device *dev, |
| u8 *ssid, u8 ssid_len) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| |
| static inline int prism2_request_scan(struct net_device *dev) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| #endif /* !PRISM2_NO_STATION_MODES */ |
| |
| |
| static int prism2_ioctl_siwscan(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int ret; |
| u8 *ssid = NULL, ssid_len = 0; |
| struct iw_scan_req *req = (struct iw_scan_req *) extra; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (data->length < sizeof(struct iw_scan_req)) |
| req = NULL; |
| |
| if (local->iw_mode == IW_MODE_MASTER) { |
| /* In master mode, we just return the results of our local |
| * tables, so we don't need to start anything... |
| * Jean II */ |
| data->length = 0; |
| return 0; |
| } |
| |
| if (!local->dev_enabled) |
| return -ENETDOWN; |
| |
| if (req && data->flags & IW_SCAN_THIS_ESSID) { |
| ssid = req->essid; |
| ssid_len = req->essid_len; |
| |
| if (ssid_len && |
| ((local->iw_mode != IW_MODE_INFRA && |
| local->iw_mode != IW_MODE_ADHOC) || |
| (local->sta_fw_ver < PRISM2_FW_VER(1,3,1)))) |
| return -EOPNOTSUPP; |
| } |
| |
| if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) |
| ret = prism2_request_hostscan(dev, ssid, ssid_len); |
| else |
| ret = prism2_request_scan(dev); |
| |
| if (ret == 0) |
| local->scan_timestamp = jiffies; |
| |
| /* Could inquire F101, F103 or wait for SIOCGIWSCAN and read RID */ |
| |
| return ret; |
| } |
| |
| |
| #ifndef PRISM2_NO_STATION_MODES |
| static char * __prism2_translate_scan(local_info_t *local, |
| struct iw_request_info *info, |
| struct hfa384x_hostscan_result *scan, |
| struct hostap_bss_info *bss, |
| char *current_ev, char *end_buf) |
| { |
| int i, chan; |
| struct iw_event iwe; |
| char *current_val; |
| u16 capabilities; |
| u8 *pos; |
| u8 *ssid, *bssid; |
| size_t ssid_len; |
| char *buf; |
| |
| if (bss) { |
| ssid = bss->ssid; |
| ssid_len = bss->ssid_len; |
| bssid = bss->bssid; |
| } else { |
| ssid = scan->ssid; |
| ssid_len = le16_to_cpu(scan->ssid_len); |
| bssid = scan->bssid; |
| } |
| if (ssid_len > 32) |
| ssid_len = 32; |
| |
| /* First entry *MUST* be the AP MAC address */ |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWAP; |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, |
| IW_EV_ADDR_LEN); |
| |
| /* Other entries will be displayed in the order we give them */ |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.length = ssid_len; |
| iwe.u.data.flags = 1; |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, ssid); |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWMODE; |
| if (bss) { |
| capabilities = bss->capab_info; |
| } else { |
| capabilities = le16_to_cpu(scan->capability); |
| } |
| if (capabilities & (WLAN_CAPABILITY_ESS | |
| WLAN_CAPABILITY_IBSS)) { |
| if (capabilities & WLAN_CAPABILITY_ESS) |
| iwe.u.mode = IW_MODE_MASTER; |
| else |
| iwe.u.mode = IW_MODE_ADHOC; |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_UINT_LEN); |
| } |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWFREQ; |
| if (scan) { |
| chan = le16_to_cpu(scan->chid); |
| } else if (bss) { |
| chan = bss->chan; |
| } else { |
| chan = 0; |
| } |
| |
| if (chan > 0) { |
| iwe.u.freq.m = freq_list[chan - 1] * 100000; |
| iwe.u.freq.e = 1; |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_FREQ_LEN); |
| } |
| |
| if (scan) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVQUAL; |
| if (local->last_scan_type == PRISM2_HOSTSCAN) { |
| iwe.u.qual.level = le16_to_cpu(scan->sl); |
| iwe.u.qual.noise = le16_to_cpu(scan->anl); |
| } else { |
| iwe.u.qual.level = |
| HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->sl)); |
| iwe.u.qual.noise = |
| HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); |
| } |
| iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED |
| | IW_QUAL_NOISE_UPDATED |
| | IW_QUAL_QUAL_INVALID |
| | IW_QUAL_DBM; |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_QUAL_LEN); |
| } |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWENCODE; |
| if (capabilities & WLAN_CAPABILITY_PRIVACY) |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
| else |
| iwe.u.data.flags = IW_ENCODE_DISABLED; |
| iwe.u.data.length = 0; |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, ""); |
| |
| /* TODO: add SuppRates into BSS table */ |
| if (scan) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = SIOCGIWRATE; |
| current_val = current_ev + iwe_stream_lcp_len(info); |
| pos = scan->sup_rates; |
| for (i = 0; i < sizeof(scan->sup_rates); i++) { |
| if (pos[i] == 0) |
| break; |
| /* Bit rate given in 500 kb/s units (+ 0x80) */ |
| iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); |
| current_val = iwe_stream_add_value( |
| info, current_ev, current_val, end_buf, &iwe, |
| IW_EV_PARAM_LEN); |
| } |
| /* Check if we added any event */ |
| if ((current_val - current_ev) > iwe_stream_lcp_len(info)) |
| current_ev = current_val; |
| } |
| |
| /* TODO: add BeaconInt,resp_rate,atim into BSS table */ |
| buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC); |
| if (buf && scan) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, buf); |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, buf); |
| |
| if (local->last_scan_type == PRISM2_HOSTSCAN && |
| (capabilities & WLAN_CAPABILITY_IBSS)) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point(info, current_ev, |
| end_buf, &iwe, buf); |
| } |
| } |
| kfree(buf); |
| |
| if (bss && bss->wpa_ie_len > 0 && bss->wpa_ie_len <= MAX_WPA_IE_LEN) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = bss->wpa_ie_len; |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, bss->wpa_ie); |
| } |
| |
| if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = bss->rsn_ie_len; |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, bss->rsn_ie); |
| } |
| |
| return current_ev; |
| } |
| |
| |
| /* Translate scan data returned from the card to a card independant |
| * format that the Wireless Tools will understand - Jean II */ |
| static inline int prism2_translate_scan(local_info_t *local, |
| struct iw_request_info *info, |
| char *buffer, int buflen) |
| { |
| struct hfa384x_hostscan_result *scan; |
| int entry, hostscan; |
| char *current_ev = buffer; |
| char *end_buf = buffer + buflen; |
| struct list_head *ptr; |
| |
| spin_lock_bh(&local->lock); |
| |
| list_for_each(ptr, &local->bss_list) { |
| struct hostap_bss_info *bss; |
| bss = list_entry(ptr, struct hostap_bss_info, list); |
| bss->included = 0; |
| } |
| |
| hostscan = local->last_scan_type == PRISM2_HOSTSCAN; |
| for (entry = 0; entry < local->last_scan_results_count; entry++) { |
| int found = 0; |
| scan = &local->last_scan_results[entry]; |
| |
| /* Report every SSID if the AP is using multiple SSIDs. If no |
| * BSS record is found (e.g., when WPA mode is disabled), |
| * report the AP once. */ |
| list_for_each(ptr, &local->bss_list) { |
| struct hostap_bss_info *bss; |
| bss = list_entry(ptr, struct hostap_bss_info, list); |
| if (memcmp(bss->bssid, scan->bssid, ETH_ALEN) == 0) { |
| bss->included = 1; |
| current_ev = __prism2_translate_scan( |
| local, info, scan, bss, current_ev, |
| end_buf); |
| found++; |
| } |
| } |
| if (!found) { |
| current_ev = __prism2_translate_scan( |
| local, info, scan, NULL, current_ev, end_buf); |
| } |
| /* Check if there is space for one more entry */ |
| if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { |
| /* Ask user space to try again with a bigger buffer */ |
| spin_unlock_bh(&local->lock); |
| return -E2BIG; |
| } |
| } |
| |
| /* Prism2 firmware has limits (32 at least in some versions) for number |
| * of BSSes in scan results. Extend this limit by using local BSS list. |
| */ |
| list_for_each(ptr, &local->bss_list) { |
| struct hostap_bss_info *bss; |
| bss = list_entry(ptr, struct hostap_bss_info, list); |
| if (bss->included) |
| continue; |
| current_ev = __prism2_translate_scan(local, info, NULL, bss, |
| current_ev, end_buf); |
| /* Check if there is space for one more entry */ |
| if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { |
| /* Ask user space to try again with a bigger buffer */ |
| spin_unlock_bh(&local->lock); |
| return -E2BIG; |
| } |
| } |
| |
| spin_unlock_bh(&local->lock); |
| |
| return current_ev - buffer; |
| } |
| #endif /* PRISM2_NO_STATION_MODES */ |
| |
| |
| static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| #ifdef PRISM2_NO_STATION_MODES |
| return -EOPNOTSUPP; |
| #else /* PRISM2_NO_STATION_MODES */ |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int res; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| /* Wait until the scan is finished. We can probably do better |
| * than that - Jean II */ |
| if (local->scan_timestamp && |
| time_before(jiffies, local->scan_timestamp + 3 * HZ)) { |
| /* Important note : we don't want to block the caller |
| * until results are ready for various reasons. |
| * First, managing wait queues is complex and racy |
| * (there may be multiple simultaneous callers). |
| * Second, we grab some rtnetlink lock before comming |
| * here (in dev_ioctl()). |
| * Third, the caller can wait on the Wireless Event |
| * - Jean II */ |
| return -EAGAIN; |
| } |
| local->scan_timestamp = 0; |
| |
| res = prism2_translate_scan(local, info, extra, data->length); |
| |
| if (res >= 0) { |
| data->length = res; |
| return 0; |
| } else { |
| data->length = 0; |
| return res; |
| } |
| #endif /* PRISM2_NO_STATION_MODES */ |
| } |
| |
| |
| static int prism2_ioctl_giwscan(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int res; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->iw_mode == IW_MODE_MASTER) { |
| /* In MASTER mode, it doesn't make sense to go around |
| * scanning the frequencies and make the stations we serve |
| * wait when what the user is really interested about is the |
| * list of stations and access points we are talking to. |
| * So, just extract results from our cache... |
| * Jean II */ |
| |
| /* Translate to WE format */ |
| res = prism2_ap_translate_scan(dev, info, extra); |
| if (res >= 0) { |
| printk(KERN_DEBUG "Scan result translation succeeded " |
| "(length=%d)\n", res); |
| data->length = res; |
| return 0; |
| } else { |
| printk(KERN_DEBUG |
| "Scan result translation failed (res=%d)\n", |
| res); |
| data->length = 0; |
| return res; |
| } |
| } else { |
| /* Station mode */ |
| return prism2_ioctl_giwscan_sta(dev, info, data, extra); |
| } |
| } |
| |
| |
| static const struct iw_priv_args prism2_priv[] = { |
| { PRISM2_IOCTL_MONITOR, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" }, |
| { PRISM2_IOCTL_READMIF, |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" }, |
| { PRISM2_IOCTL_WRITEMIF, |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, 0, "writemif" }, |
| { PRISM2_IOCTL_RESET, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "reset" }, |
| { PRISM2_IOCTL_INQUIRE, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "inquire" }, |
| { PRISM2_IOCTL_SET_RID_WORD, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_rid_word" }, |
| { PRISM2_IOCTL_MACCMD, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "maccmd" }, |
| { PRISM2_IOCTL_WDS_ADD, |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_add" }, |
| { PRISM2_IOCTL_WDS_DEL, |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_del" }, |
| { PRISM2_IOCTL_ADDMAC, |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "addmac" }, |
| { PRISM2_IOCTL_DELMAC, |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "delmac" }, |
| { PRISM2_IOCTL_KICKMAC, |
| IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "kickmac" }, |
| /* --- raw access to sub-ioctls --- */ |
| { PRISM2_IOCTL_PRISM2_PARAM, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "prism2_param" }, |
| { PRISM2_IOCTL_GET_PRISM2_PARAM, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprism2_param" }, |
| /* --- sub-ioctls handlers --- */ |
| { PRISM2_IOCTL_PRISM2_PARAM, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" }, |
| { PRISM2_IOCTL_GET_PRISM2_PARAM, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" }, |
| /* --- sub-ioctls definitions --- */ |
| { PRISM2_PARAM_TXRATECTRL, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "txratectrl" }, |
| { PRISM2_PARAM_TXRATECTRL, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettxratectrl" }, |
| { PRISM2_PARAM_BEACON_INT, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beacon_int" }, |
| { PRISM2_PARAM_BEACON_INT, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbeacon_int" }, |
| #ifndef PRISM2_NO_STATION_MODES |
| { PRISM2_PARAM_PSEUDO_IBSS, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "pseudo_ibss" }, |
| { PRISM2_PARAM_PSEUDO_IBSS, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpseudo_ibss" }, |
| #endif /* PRISM2_NO_STATION_MODES */ |
| { PRISM2_PARAM_ALC, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "alc" }, |
| { PRISM2_PARAM_ALC, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getalc" }, |
| { PRISM2_PARAM_DUMP, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dump" }, |
| { PRISM2_PARAM_DUMP, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdump" }, |
| { PRISM2_PARAM_OTHER_AP_POLICY, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "other_ap_policy" }, |
| { PRISM2_PARAM_OTHER_AP_POLICY, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getother_ap_pol" }, |
| { PRISM2_PARAM_AP_MAX_INACTIVITY, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_inactivity" }, |
| { PRISM2_PARAM_AP_MAX_INACTIVITY, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_inactivi" }, |
| { PRISM2_PARAM_AP_BRIDGE_PACKETS, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bridge_packets" }, |
| { PRISM2_PARAM_AP_BRIDGE_PACKETS, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbridge_packe" }, |
| { PRISM2_PARAM_DTIM_PERIOD, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dtim_period" }, |
| { PRISM2_PARAM_DTIM_PERIOD, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdtim_period" }, |
| { PRISM2_PARAM_AP_NULLFUNC_ACK, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "nullfunc_ack" }, |
| { PRISM2_PARAM_AP_NULLFUNC_ACK, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getnullfunc_ack" }, |
| { PRISM2_PARAM_MAX_WDS, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_wds" }, |
| { PRISM2_PARAM_MAX_WDS, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_wds" }, |
| { PRISM2_PARAM_AP_AUTOM_AP_WDS, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "autom_ap_wds" }, |
| { PRISM2_PARAM_AP_AUTOM_AP_WDS, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getautom_ap_wds" }, |
| { PRISM2_PARAM_AP_AUTH_ALGS, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_auth_algs" }, |
| { PRISM2_PARAM_AP_AUTH_ALGS, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_auth_algs" }, |
| { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "allow_fcserr" }, |
| { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getallow_fcserr" }, |
| { PRISM2_PARAM_HOST_ENCRYPT, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_encrypt" }, |
| { PRISM2_PARAM_HOST_ENCRYPT, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_encrypt" }, |
| { PRISM2_PARAM_HOST_DECRYPT, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_decrypt" }, |
| { PRISM2_PARAM_HOST_DECRYPT, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_decrypt" }, |
| #ifndef PRISM2_NO_STATION_MODES |
| { PRISM2_PARAM_HOST_ROAMING, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_roaming" }, |
| { PRISM2_PARAM_HOST_ROAMING, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_roaming" }, |
| #endif /* PRISM2_NO_STATION_MODES */ |
| { PRISM2_PARAM_BCRX_STA_KEY, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bcrx_sta_key" }, |
| { PRISM2_PARAM_BCRX_STA_KEY, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbcrx_sta_key" }, |
| { PRISM2_PARAM_IEEE_802_1X, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ieee_802_1x" }, |
| { PRISM2_PARAM_IEEE_802_1X, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getieee_802_1x" }, |
| { PRISM2_PARAM_ANTSEL_TX, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_tx" }, |
| { PRISM2_PARAM_ANTSEL_TX, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_tx" }, |
| { PRISM2_PARAM_ANTSEL_RX, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_rx" }, |
| { PRISM2_PARAM_ANTSEL_RX, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_rx" }, |
| { PRISM2_PARAM_MONITOR_TYPE, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor_type" }, |
| { PRISM2_PARAM_MONITOR_TYPE, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmonitor_type" }, |
| { PRISM2_PARAM_WDS_TYPE, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wds_type" }, |
| { PRISM2_PARAM_WDS_TYPE, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwds_type" }, |
| { PRISM2_PARAM_HOSTSCAN, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostscan" }, |
| { PRISM2_PARAM_HOSTSCAN, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostscan" }, |
| { PRISM2_PARAM_AP_SCAN, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_scan" }, |
| { PRISM2_PARAM_AP_SCAN, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_scan" }, |
| { PRISM2_PARAM_ENH_SEC, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "enh_sec" }, |
| { PRISM2_PARAM_ENH_SEC, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getenh_sec" }, |
| #ifdef PRISM2_IO_DEBUG |
| { PRISM2_PARAM_IO_DEBUG, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "io_debug" }, |
| { PRISM2_PARAM_IO_DEBUG, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getio_debug" }, |
| #endif /* PRISM2_IO_DEBUG */ |
| { PRISM2_PARAM_BASIC_RATES, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "basic_rates" }, |
| { PRISM2_PARAM_BASIC_RATES, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbasic_rates" }, |
| { PRISM2_PARAM_OPER_RATES, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oper_rates" }, |
| { PRISM2_PARAM_OPER_RATES, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getoper_rates" }, |
| { PRISM2_PARAM_HOSTAPD, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd" }, |
| { PRISM2_PARAM_HOSTAPD, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd" }, |
| { PRISM2_PARAM_HOSTAPD_STA, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd_sta" }, |
| { PRISM2_PARAM_HOSTAPD_STA, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd_sta" }, |
| { PRISM2_PARAM_WPA, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wpa" }, |
| { PRISM2_PARAM_WPA, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwpa" }, |
| { PRISM2_PARAM_PRIVACY_INVOKED, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "privacy_invoked" }, |
| { PRISM2_PARAM_PRIVACY_INVOKED, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprivacy_invo" }, |
| { PRISM2_PARAM_TKIP_COUNTERMEASURES, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "tkip_countermea" }, |
| { PRISM2_PARAM_TKIP_COUNTERMEASURES, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettkip_counter" }, |
| { PRISM2_PARAM_DROP_UNENCRYPTED, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "drop_unencrypte" }, |
| { PRISM2_PARAM_DROP_UNENCRYPTED, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdrop_unencry" }, |
| { PRISM2_PARAM_SCAN_CHANNEL_MASK, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "scan_channels" }, |
| { PRISM2_PARAM_SCAN_CHANNEL_MASK, |
| 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getscan_channel" }, |
| }; |
| |
| |
| static int prism2_ioctl_priv_inquire(struct net_device *dev, int *i) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->cmd(dev, HFA384X_CMDCODE_INQUIRE, *i, NULL, NULL)) |
| return -EOPNOTSUPP; |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_priv_prism2_param(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int *i = (int *) extra; |
| int param = *i; |
| int value = *(i + 1); |
| int ret = 0; |
| u16 val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| switch (param) { |
| case PRISM2_PARAM_TXRATECTRL: |
| local->fw_tx_rate_control = value; |
| break; |
| |
| case PRISM2_PARAM_BEACON_INT: |
| if (hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, value) || |
| local->func->reset_port(dev)) |
| ret = -EINVAL; |
| else |
| local->beacon_int = value; |
| break; |
| |
| #ifndef PRISM2_NO_STATION_MODES |
| case PRISM2_PARAM_PSEUDO_IBSS: |
| if (value == local->pseudo_adhoc) |
| break; |
| |
| if (value != 0 && value != 1) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n", |
| dev->name, local->pseudo_adhoc, value); |
| local->pseudo_adhoc = value; |
| if (local->iw_mode != IW_MODE_ADHOC) |
| break; |
| |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, |
| hostap_get_porttype(local))) { |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| if (local->func->reset_port(dev)) |
| ret = -EINVAL; |
| break; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| |
| case PRISM2_PARAM_ALC: |
| printk(KERN_DEBUG "%s: %s ALC\n", dev->name, |
| value == 0 ? "Disabling" : "Enabling"); |
| val = HFA384X_TEST_CFG_BIT_ALC; |
| local->func->cmd(dev, HFA384X_CMDCODE_TEST | |
| (HFA384X_TEST_CFG_BITS << 8), |
| value == 0 ? 0 : 1, &val, NULL); |
| break; |
| |
| case PRISM2_PARAM_DUMP: |
| local->frame_dump = value; |
| break; |
| |
| case PRISM2_PARAM_OTHER_AP_POLICY: |
| if (value < 0 || value > 3) { |
| ret = -EINVAL; |
| break; |
| } |
| if (local->ap != NULL) |
| local->ap->ap_policy = value; |
| break; |
| |
| case PRISM2_PARAM_AP_MAX_INACTIVITY: |
| if (value < 0 || value > 7 * 24 * 60 * 60) { |
| ret = -EINVAL; |
| break; |
| } |
| if (local->ap != NULL) |
| local->ap->max_inactivity = value * HZ; |
| break; |
| |
| case PRISM2_PARAM_AP_BRIDGE_PACKETS: |
| if (local->ap != NULL) |
| local->ap->bridge_packets = value; |
| break; |
| |
| case PRISM2_PARAM_DTIM_PERIOD: |
| if (value < 0 || value > 65535) { |
| ret = -EINVAL; |
| break; |
| } |
| if (hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, value) |
| || local->func->reset_port(dev)) |
| ret = -EINVAL; |
| else |
| local->dtim_period = value; |
| break; |
| |
| case PRISM2_PARAM_AP_NULLFUNC_ACK: |
| if (local->ap != NULL) |
| local->ap->nullfunc_ack = value; |
| break; |
| |
| case PRISM2_PARAM_MAX_WDS: |
| local->wds_max_connections = value; |
| break; |
| |
| case PRISM2_PARAM_AP_AUTOM_AP_WDS: |
| if (local->ap != NULL) { |
| if (!local->ap->autom_ap_wds && value) { |
| /* add WDS link to all APs in STA table */ |
| hostap_add_wds_links(local); |
| } |
| local->ap->autom_ap_wds = value; |
| } |
| break; |
| |
| case PRISM2_PARAM_AP_AUTH_ALGS: |
| local->auth_algs = value; |
| if (hostap_set_auth_algs(local)) |
| ret = -EINVAL; |
| break; |
| |
| case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: |
| local->monitor_allow_fcserr = value; |
| break; |
| |
| case PRISM2_PARAM_HOST_ENCRYPT: |
| local->host_encrypt = value; |
| if (hostap_set_encryption(local) || |
| local->func->reset_port(dev)) |
| ret = -EINVAL; |
| break; |
| |
| case PRISM2_PARAM_HOST_DECRYPT: |
| local->host_decrypt = value; |
| if (hostap_set_encryption(local) || |
| local->func->reset_port(dev)) |
| ret = -EINVAL; |
| break; |
| |
| #ifndef PRISM2_NO_STATION_MODES |
| case PRISM2_PARAM_HOST_ROAMING: |
| if (value < 0 || value > 2) { |
| ret = -EINVAL; |
| break; |
| } |
| local->host_roaming = value; |
| if (hostap_set_roaming(local) || local->func->reset_port(dev)) |
| ret = -EINVAL; |
| break; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| |
| case PRISM2_PARAM_BCRX_STA_KEY: |
| local->bcrx_sta_key = value; |
| break; |
| |
| case PRISM2_PARAM_IEEE_802_1X: |
| local->ieee_802_1x = value; |
| break; |
| |
| case PRISM2_PARAM_ANTSEL_TX: |
| if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { |
| ret = -EINVAL; |
| break; |
| } |
| local->antsel_tx = value; |
| hostap_set_antsel(local); |
| break; |
| |
| case PRISM2_PARAM_ANTSEL_RX: |
| if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { |
| ret = -EINVAL; |
| break; |
| } |
| local->antsel_rx = value; |
| hostap_set_antsel(local); |
| break; |
| |
| case PRISM2_PARAM_MONITOR_TYPE: |
| if (value != PRISM2_MONITOR_80211 && |
| value != PRISM2_MONITOR_CAPHDR && |
| value != PRISM2_MONITOR_PRISM && |
| value != PRISM2_MONITOR_RADIOTAP) { |
| ret = -EINVAL; |
| break; |
| } |
| local->monitor_type = value; |
| if (local->iw_mode == IW_MODE_MONITOR) |
| hostap_monitor_set_type(local); |
| break; |
| |
| case PRISM2_PARAM_WDS_TYPE: |
| local->wds_type = value; |
| break; |
| |
| case PRISM2_PARAM_HOSTSCAN: |
| { |
| struct hfa384x_hostscan_request scan_req; |
| u16 rate; |
| |
| memset(&scan_req, 0, sizeof(scan_req)); |
| scan_req.channel_list = cpu_to_le16(0x3fff); |
| switch (value) { |
| case 1: rate = HFA384X_RATES_1MBPS; break; |
| case 2: rate = HFA384X_RATES_2MBPS; break; |
| case 3: rate = HFA384X_RATES_5MBPS; break; |
| case 4: rate = HFA384X_RATES_11MBPS; break; |
| default: rate = HFA384X_RATES_1MBPS; break; |
| } |
| scan_req.txrate = cpu_to_le16(rate); |
| /* leave SSID empty to accept all SSIDs */ |
| |
| if (local->iw_mode == IW_MODE_MASTER) { |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, |
| HFA384X_PORTTYPE_BSS) || |
| local->func->reset_port(dev)) |
| printk(KERN_DEBUG "Leaving Host AP mode " |
| "for HostScan failed\n"); |
| } |
| |
| if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, |
| sizeof(scan_req))) { |
| printk(KERN_DEBUG "HOSTSCAN failed\n"); |
| ret = -EINVAL; |
| } |
| if (local->iw_mode == IW_MODE_MASTER) { |
| wait_queue_t __wait; |
| init_waitqueue_entry(&__wait, current); |
| add_wait_queue(&local->hostscan_wq, &__wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(HZ); |
| if (signal_pending(current)) |
| ret = -EINTR; |
| set_current_state(TASK_RUNNING); |
| remove_wait_queue(&local->hostscan_wq, &__wait); |
| |
| if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, |
| HFA384X_PORTTYPE_HOSTAP) || |
| local->func->reset_port(dev)) |
| printk(KERN_DEBUG "Returning to Host AP mode " |
| "after HostScan failed\n"); |
| } |
| break; |
| } |
| |
| case PRISM2_PARAM_AP_SCAN: |
| local->passive_scan_interval = value; |
| if (timer_pending(&local->passive_scan_timer)) |
| del_timer(&local->passive_scan_timer); |
| if (value > 0) { |
| local->passive_scan_timer.expires = jiffies + |
| local->passive_scan_interval * HZ; |
| add_timer(&local->passive_scan_timer); |
| } |
| break; |
| |
| case PRISM2_PARAM_ENH_SEC: |
| if (value < 0 || value > 3) { |
| ret = -EINVAL; |
| break; |
| } |
| local->enh_sec = value; |
| if (hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, |
| local->enh_sec) || |
| local->func->reset_port(dev)) { |
| printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w " |
| "1.6.3 or newer\n", dev->name); |
| ret = -EOPNOTSUPP; |
| } |
| break; |
| |
| #ifdef PRISM2_IO_DEBUG |
| case PRISM2_PARAM_IO_DEBUG: |
| local->io_debug_enabled = value; |
| break; |
| #endif /* PRISM2_IO_DEBUG */ |
| |
| case PRISM2_PARAM_BASIC_RATES: |
| if ((value & local->tx_rate_control) != value || value == 0) { |
| printk(KERN_INFO "%s: invalid basic rate set - basic " |
| "rates must be in supported rate set\n", |
| dev->name); |
| ret = -EINVAL; |
| break; |
| } |
| local->basic_rates = value; |
| if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, |
| local->basic_rates) || |
| local->func->reset_port(dev)) |
| ret = -EINVAL; |
| break; |
| |
| case PRISM2_PARAM_OPER_RATES: |
| local->tx_rate_control = value; |
| if (hostap_set_rate(dev)) |
| ret = -EINVAL; |
| break; |
| |
| case PRISM2_PARAM_HOSTAPD: |
| ret = hostap_set_hostapd(local, value, 1); |
| break; |
| |
| case PRISM2_PARAM_HOSTAPD_STA: |
| ret = hostap_set_hostapd_sta(local, value, 1); |
| break; |
| |
| case PRISM2_PARAM_WPA: |
| local->wpa = value; |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) |
| ret = -EOPNOTSUPP; |
| else if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, |
| value ? 1 : 0)) |
| ret = -EINVAL; |
| break; |
| |
| case PRISM2_PARAM_PRIVACY_INVOKED: |
| local->privacy_invoked = value; |
| if (hostap_set_encryption(local) || |
| local->func->reset_port(dev)) |
| ret = -EINVAL; |
| break; |
| |
| case PRISM2_PARAM_TKIP_COUNTERMEASURES: |
| local->tkip_countermeasures = value; |
| break; |
| |
| case PRISM2_PARAM_DROP_UNENCRYPTED: |
| local->drop_unencrypted = value; |
| break; |
| |
| case PRISM2_PARAM_SCAN_CHANNEL_MASK: |
| local->scan_channel_mask = value; |
| break; |
| |
| default: |
| printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n", |
| dev->name, param); |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_priv_get_prism2_param(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int *param = (int *) extra; |
| int ret = 0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| switch (*param) { |
| case PRISM2_PARAM_TXRATECTRL: |
| *param = local->fw_tx_rate_control; |
| break; |
| |
| case PRISM2_PARAM_BEACON_INT: |
| *param = local->beacon_int; |
| break; |
| |
| case PRISM2_PARAM_PSEUDO_IBSS: |
| *param = local->pseudo_adhoc; |
| break; |
| |
| case PRISM2_PARAM_ALC: |
| ret = -EOPNOTSUPP; /* FIX */ |
| break; |
| |
| case PRISM2_PARAM_DUMP: |
| *param = local->frame_dump; |
| break; |
| |
| case PRISM2_PARAM_OTHER_AP_POLICY: |
| if (local->ap != NULL) |
| *param = local->ap->ap_policy; |
| else |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case PRISM2_PARAM_AP_MAX_INACTIVITY: |
| if (local->ap != NULL) |
| *param = local->ap->max_inactivity / HZ; |
| else |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case PRISM2_PARAM_AP_BRIDGE_PACKETS: |
| if (local->ap != NULL) |
| *param = local->ap->bridge_packets; |
| else |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case PRISM2_PARAM_DTIM_PERIOD: |
| *param = local->dtim_period; |
| break; |
| |
| case PRISM2_PARAM_AP_NULLFUNC_ACK: |
| if (local->ap != NULL) |
| *param = local->ap->nullfunc_ack; |
| else |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case PRISM2_PARAM_MAX_WDS: |
| *param = local->wds_max_connections; |
| break; |
| |
| case PRISM2_PARAM_AP_AUTOM_AP_WDS: |
| if (local->ap != NULL) |
| *param = local->ap->autom_ap_wds; |
| else |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case PRISM2_PARAM_AP_AUTH_ALGS: |
| *param = local->auth_algs; |
| break; |
| |
| case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: |
| *param = local->monitor_allow_fcserr; |
| break; |
| |
| case PRISM2_PARAM_HOST_ENCRYPT: |
| *param = local->host_encrypt; |
| break; |
| |
| case PRISM2_PARAM_HOST_DECRYPT: |
| *param = local->host_decrypt; |
| break; |
| |
| case PRISM2_PARAM_HOST_ROAMING: |
| *param = local->host_roaming; |
| break; |
| |
| case PRISM2_PARAM_BCRX_STA_KEY: |
| *param = local->bcrx_sta_key; |
| break; |
| |
| case PRISM2_PARAM_IEEE_802_1X: |
| *param = local->ieee_802_1x; |
| break; |
| |
| case PRISM2_PARAM_ANTSEL_TX: |
| *param = local->antsel_tx; |
| break; |
| |
| case PRISM2_PARAM_ANTSEL_RX: |
| *param = local->antsel_rx; |
| break; |
| |
| case PRISM2_PARAM_MONITOR_TYPE: |
| *param = local->monitor_type; |
| break; |
| |
| case PRISM2_PARAM_WDS_TYPE: |
| *param = local->wds_type; |
| break; |
| |
| case PRISM2_PARAM_HOSTSCAN: |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case PRISM2_PARAM_AP_SCAN: |
| *param = local->passive_scan_interval; |
| break; |
| |
| case PRISM2_PARAM_ENH_SEC: |
| *param = local->enh_sec; |
| break; |
| |
| #ifdef PRISM2_IO_DEBUG |
| case PRISM2_PARAM_IO_DEBUG: |
| *param = local->io_debug_enabled; |
| break; |
| #endif /* PRISM2_IO_DEBUG */ |
| |
| case PRISM2_PARAM_BASIC_RATES: |
| *param = local->basic_rates; |
| break; |
| |
| case PRISM2_PARAM_OPER_RATES: |
| *param = local->tx_rate_control; |
| break; |
| |
| case PRISM2_PARAM_HOSTAPD: |
| *param = local->hostapd; |
| break; |
| |
| case PRISM2_PARAM_HOSTAPD_STA: |
| *param = local->hostapd_sta; |
| break; |
| |
| case PRISM2_PARAM_WPA: |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) |
| ret = -EOPNOTSUPP; |
| *param = local->wpa; |
| break; |
| |
| case PRISM2_PARAM_PRIVACY_INVOKED: |
| *param = local->privacy_invoked; |
| break; |
| |
| case PRISM2_PARAM_TKIP_COUNTERMEASURES: |
| *param = local->tkip_countermeasures; |
| break; |
| |
| case PRISM2_PARAM_DROP_UNENCRYPTED: |
| *param = local->drop_unencrypted; |
| break; |
| |
| case PRISM2_PARAM_SCAN_CHANNEL_MASK: |
| *param = local->scan_channel_mask; |
| break; |
| |
| default: |
| printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n", |
| dev->name, *param); |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_priv_readmif(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| u16 resp0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, *extra, NULL, |
| &resp0)) |
| return -EOPNOTSUPP; |
| else |
| *extra = resp0; |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_priv_writemif(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, char *extra) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| u16 cr, val; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| cr = *extra; |
| val = *(extra + 1); |
| if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, cr, &val, NULL)) |
| return -EOPNOTSUPP; |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_priv_monitor(struct net_device *dev, int *i) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int ret = 0; |
| u32 mode; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| printk(KERN_DEBUG "%s: process %d (%s) used deprecated iwpriv monitor " |
| "- update software to use iwconfig mode monitor\n", |
| dev->name, task_pid_nr(current), current->comm); |
| |
| /* Backward compatibility code - this can be removed at some point */ |
| |
| if (*i == 0) { |
| /* Disable monitor mode - old mode was not saved, so go to |
| * Master mode */ |
| mode = IW_MODE_MASTER; |
| ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); |
| } else if (*i == 1) { |
| /* netlink socket mode is not supported anymore since it did |
| * not separate different devices from each other and was not |
| * best method for delivering large amount of packets to |
| * user space */ |
| ret = -EOPNOTSUPP; |
| } else if (*i == 2 || *i == 3) { |
| switch (*i) { |
| case 2: |
| local->monitor_type = PRISM2_MONITOR_80211; |
| break; |
| case 3: |
| local->monitor_type = PRISM2_MONITOR_PRISM; |
| break; |
| } |
| mode = IW_MODE_MONITOR; |
| ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); |
| hostap_monitor_mode_enable(local); |
| } else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_priv_reset(struct net_device *dev, int *i) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| printk(KERN_DEBUG "%s: manual reset request(%d)\n", dev->name, *i); |
| switch (*i) { |
| case 0: |
| /* Disable and enable card */ |
| local->func->hw_shutdown(dev, 1); |
| local->func->hw_config(dev, 0); |
| break; |
| |
| case 1: |
| /* COR sreset */ |
| local->func->hw_reset(dev); |
| break; |
| |
| case 2: |
| /* Disable and enable port 0 */ |
| local->func->reset_port(dev); |
| break; |
| |
| case 3: |
| prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); |
| if (local->func->cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, |
| NULL)) |
| return -EINVAL; |
| break; |
| |
| case 4: |
| if (local->func->cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, |
| NULL)) |
| return -EINVAL; |
| break; |
| |
| default: |
| printk(KERN_DEBUG "Unknown reset request %d\n", *i); |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_priv_set_rid_word(struct net_device *dev, int *i) |
| { |
| int rid = *i; |
| int value = *(i + 1); |
| |
| printk(KERN_DEBUG "%s: Set RID[0x%X] = %d\n", dev->name, rid, value); |
| |
| if (hostap_set_word(dev, rid, value)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| |
| #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT |
| static int ap_mac_cmd_ioctl(local_info_t *local, int *cmd) |
| { |
| int ret = 0; |
| |
| switch (*cmd) { |
| case AP_MAC_CMD_POLICY_OPEN: |
| local->ap->mac_restrictions.policy = MAC_POLICY_OPEN; |
| break; |
| case AP_MAC_CMD_POLICY_ALLOW: |
| local->ap->mac_restrictions.policy = MAC_POLICY_ALLOW; |
| break; |
| case AP_MAC_CMD_POLICY_DENY: |
| local->ap->mac_restrictions.policy = MAC_POLICY_DENY; |
| break; |
| case AP_MAC_CMD_FLUSH: |
| ap_control_flush_macs(&local->ap->mac_restrictions); |
| break; |
| case AP_MAC_CMD_KICKALL: |
| ap_control_kickall(local->ap); |
| hostap_deauth_all_stas(local->dev, local->ap, 0); |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |
| #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ |
| |
| |
| #ifdef PRISM2_DOWNLOAD_SUPPORT |
| static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) |
| { |
| struct prism2_download_param *param; |
| int ret = 0; |
| |
| if (p->length < sizeof(struct prism2_download_param) || |
| p->length > 1024 || !p->pointer) |
| return -EINVAL; |
| |
| param = (struct prism2_download_param *) |
| kmalloc(p->length, GFP_KERNEL); |
| if (param == NULL) |
| return -ENOMEM; |
| |
| if (copy_from_user(param, p->pointer, p->length)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| if (p->length < sizeof(struct prism2_download_param) + |
| param->num_areas * sizeof(struct prism2_download_area)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = local->func->download(local, param); |
| |
| out: |
| kfree(param); |
| return ret; |
| } |
| #endif /* PRISM2_DOWNLOAD_SUPPORT */ |
| |
| |
| static int prism2_set_genericelement(struct net_device *dev, u8 *elem, |
| size_t len) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| u8 *buf; |
| |
| /* |
| * Add 16-bit length in the beginning of the buffer because Prism2 RID |
| * includes it. |
| */ |
| buf = kmalloc(len + 2, GFP_KERNEL); |
| if (buf == NULL) |
| return -ENOMEM; |
| |
| *((__le16 *) buf) = cpu_to_le16(len); |
| memcpy(buf + 2, elem, len); |
| |
| kfree(local->generic_elem); |
| local->generic_elem = buf; |
| local->generic_elem_len = len + 2; |
| |
| return local->func->set_rid(local->dev, HFA384X_RID_GENERICELEMENT, |
| buf, len + 2); |
| } |
| |
| |
| static int prism2_ioctl_siwauth(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *data, char *extra) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| |
| switch (data->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| case IW_AUTH_CIPHER_PAIRWISE: |
| case IW_AUTH_CIPHER_GROUP: |
| case IW_AUTH_KEY_MGMT: |
| /* |
| * Host AP driver does not use these parameters and allows |
| * wpa_supplicant to control them internally. |
| */ |
| break; |
| case IW_AUTH_TKIP_COUNTERMEASURES: |
| local->tkip_countermeasures = data->value; |
| break; |
| case IW_AUTH_DROP_UNENCRYPTED: |
| local->drop_unencrypted = data->value; |
| break; |
| case IW_AUTH_80211_AUTH_ALG: |
| local->auth_algs = data->value; |
| break; |
| case IW_AUTH_WPA_ENABLED: |
| if (data->value == 0) { |
| local->wpa = 0; |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) |
| break; |
| prism2_set_genericelement(dev, "", 0); |
| local->host_roaming = 0; |
| local->privacy_invoked = 0; |
| if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, |
| 0) || |
| hostap_set_roaming(local) || |
| hostap_set_encryption(local) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| break; |
| } |
| if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) |
| return -EOPNOTSUPP; |
| local->host_roaming = 2; |
| local->privacy_invoked = 1; |
| local->wpa = 1; |
| if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1) || |
| hostap_set_roaming(local) || |
| hostap_set_encryption(local) || |
| local->func->reset_port(dev)) |
| return -EINVAL; |
| break; |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| local->ieee_802_1x = data->value; |
| break; |
| case IW_AUTH_PRIVACY_INVOKED: |
| local->privacy_invoked = data->value; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_giwauth(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *data, char *extra) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| |
| switch (data->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| case IW_AUTH_CIPHER_PAIRWISE: |
| case IW_AUTH_CIPHER_GROUP: |
| case IW_AUTH_KEY_MGMT: |
| /* |
| * Host AP driver does not use these parameters and allows |
| * wpa_supplicant to control them internally. |
| */ |
| return -EOPNOTSUPP; |
| case IW_AUTH_TKIP_COUNTERMEASURES: |
| data->value = local->tkip_countermeasures; |
| break; |
| case IW_AUTH_DROP_UNENCRYPTED: |
| data->value = local->drop_unencrypted; |
| break; |
| case IW_AUTH_80211_AUTH_ALG: |
| data->value = local->auth_algs; |
| break; |
| case IW_AUTH_WPA_ENABLED: |
| data->value = local->wpa; |
| break; |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| data->value = local->ieee_802_1x; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwencodeext(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, char *extra) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; |
| int i, ret = 0; |
| struct lib80211_crypto_ops *ops; |
| struct lib80211_crypt_data **crypt; |
| void *sta_ptr; |
| u8 *addr; |
| const char *alg, *module; |
| |
| i = erq->flags & IW_ENCODE_INDEX; |
| if (i > WEP_KEYS) |
| return -EINVAL; |
| if (i < 1 || i > WEP_KEYS) |
| i = local->crypt_info.tx_keyidx; |
| else |
| i--; |
| if (i < 0 || i >= WEP_KEYS) |
| return -EINVAL; |
| |
| addr = ext->addr.sa_data; |
| if (addr[0] == 0xff && addr[1] == 0xff && addr[2] == 0xff && |
| addr[3] == 0xff && addr[4] == 0xff && addr[5] == 0xff) { |
| sta_ptr = NULL; |
| crypt = &local->crypt_info.crypt[i]; |
| } else { |
| if (i != 0) |
| return -EINVAL; |
| sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); |
| if (sta_ptr == NULL) { |
| if (local->iw_mode == IW_MODE_INFRA) { |
| /* |
| * TODO: add STA entry for the current AP so |
| * that unicast key can be used. For now, this |
| * is emulated by using default key idx 0. |
| */ |
| i = 0; |
| crypt = &local->crypt_info.crypt[i]; |
| } else |
| return -EINVAL; |
| } |
| } |
| |
| if ((erq->flags & IW_ENCODE_DISABLED) || |
| ext->alg == IW_ENCODE_ALG_NONE) { |
| if (*crypt) |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); |
| goto done; |
| } |
| |
| switch (ext->alg) { |
| case IW_ENCODE_ALG_WEP: |
| alg = "WEP"; |
| module = "lib80211_crypt_wep"; |
| break; |
| case IW_ENCODE_ALG_TKIP: |
| alg = "TKIP"; |
| module = "lib80211_crypt_tkip"; |
| break; |
| case IW_ENCODE_ALG_CCMP: |
| alg = "CCMP"; |
| module = "lib80211_crypt_ccmp"; |
| break; |
| default: |
| printk(KERN_DEBUG "%s: unsupported algorithm %d\n", |
| local->dev->name, ext->alg); |
| ret = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| ops = lib80211_get_crypto_ops(alg); |
| if (ops == NULL) { |
| request_module(module); |
| ops = lib80211_get_crypto_ops(alg); |
| } |
| if (ops == NULL) { |
| printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", |
| local->dev->name, alg); |
| ret = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| if (sta_ptr || ext->alg != IW_ENCODE_ALG_WEP) { |
| /* |
| * Per station encryption and other than WEP algorithms |
| * require host-based encryption, so force them on |
| * automatically. |
| */ |
| local->host_decrypt = local->host_encrypt = 1; |
| } |
| |
| if (*crypt == NULL || (*crypt)->ops != ops) { |
| struct lib80211_crypt_data *new_crypt; |
| |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); |
| |
| new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), |
| GFP_KERNEL); |
| if (new_crypt == NULL) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| new_crypt->ops = ops; |
| if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) |
| new_crypt->priv = new_crypt->ops->init(i); |
| if (new_crypt->priv == NULL) { |
| kfree(new_crypt); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| *crypt = new_crypt; |
| } |
| |
| /* |
| * TODO: if ext_flags does not have IW_ENCODE_EXT_RX_SEQ_VALID, the |
| * existing seq# should not be changed. |
| * TODO: if ext_flags has IW_ENCODE_EXT_TX_SEQ_VALID, next TX seq# |
| * should be changed to something else than zero. |
| */ |
| if ((!(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) || ext->key_len > 0) |
| && (*crypt)->ops->set_key && |
| (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, |
| (*crypt)->priv) < 0) { |
| printk(KERN_DEBUG "%s: key setting failed\n", |
| local->dev->name); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { |
| if (!sta_ptr) |
| local->crypt_info.tx_keyidx = i; |
| } |
| |
| |
| if (sta_ptr == NULL && ext->key_len > 0) { |
| int first = 1, j; |
| for (j = 0; j < WEP_KEYS; j++) { |
| if (j != i && local->crypt_info.crypt[j]) { |
| first = 0; |
| break; |
| } |
| } |
| if (first) |
| local->crypt_info.tx_keyidx = i; |
| } |
| |
| done: |
| if (sta_ptr) |
| hostap_handle_sta_release(sta_ptr); |
| |
| local->open_wep = erq->flags & IW_ENCODE_OPEN; |
| |
| /* |
| * Do not reset port0 if card is in Managed mode since resetting will |
| * generate new IEEE 802.11 authentication which may end up in looping |
| * with IEEE 802.1X. Prism2 documentation seem to require port reset |
| * after WEP configuration. However, keys are apparently changed at |
| * least in Managed mode. |
| */ |
| if (ret == 0 && |
| (hostap_set_encryption(local) || |
| (local->iw_mode != IW_MODE_INFRA && |
| local->func->reset_port(local->dev)))) |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_giwencodeext(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, char *extra) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| struct lib80211_crypt_data **crypt; |
| void *sta_ptr; |
| int max_key_len, i; |
| struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; |
| u8 *addr; |
| |
| max_key_len = erq->length - sizeof(*ext); |
| if (max_key_len < 0) |
| return -EINVAL; |
| |
| i = erq->flags & IW_ENCODE_INDEX; |
| if (i < 1 || i > WEP_KEYS) |
| i = local->crypt_info.tx_keyidx; |
| else |
| i--; |
| |
| addr = ext->addr.sa_data; |
| if (addr[0] == 0xff && addr[1] == 0xff && addr[2] == 0xff && |
| addr[3] == 0xff && addr[4] == 0xff && addr[5] == 0xff) { |
| sta_ptr = NULL; |
| crypt = &local->crypt_info.crypt[i]; |
| } else { |
| i = 0; |
| sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); |
| if (sta_ptr == NULL) |
| return -EINVAL; |
| } |
| erq->flags = i + 1; |
| memset(ext, 0, sizeof(*ext)); |
| |
| if (*crypt == NULL || (*crypt)->ops == NULL) { |
| ext->alg = IW_ENCODE_ALG_NONE; |
| ext->key_len = 0; |
| erq->flags |= IW_ENCODE_DISABLED; |
| } else { |
| if (strcmp((*crypt)->ops->name, "WEP") == 0) |
| ext->alg = IW_ENCODE_ALG_WEP; |
| else if (strcmp((*crypt)->ops->name, "TKIP") == 0) |
| ext->alg = IW_ENCODE_ALG_TKIP; |
| else if (strcmp((*crypt)->ops->name, "CCMP") == 0) |
| ext->alg = IW_ENCODE_ALG_CCMP; |
| else |
| return -EINVAL; |
| |
| if ((*crypt)->ops->get_key) { |
| ext->key_len = |
| (*crypt)->ops->get_key(ext->key, |
| max_key_len, |
| ext->tx_seq, |
| (*crypt)->priv); |
| if (ext->key_len && |
| (ext->alg == IW_ENCODE_ALG_TKIP || |
| ext->alg == IW_ENCODE_ALG_CCMP)) |
| ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; |
| } |
| } |
| |
| if (sta_ptr) |
| hostap_handle_sta_release(sta_ptr); |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_set_encryption(local_info_t *local, |
| struct prism2_hostapd_param *param, |
| int param_len) |
| { |
| int ret = 0; |
| struct lib80211_crypto_ops *ops; |
| struct lib80211_crypt_data **crypt; |
| void *sta_ptr; |
| |
| param->u.crypt.err = 0; |
| param->u.crypt.alg[HOSTAP_CRYPT_ALG_NAME_LEN - 1] = '\0'; |
| |
| if (param_len != |
| (int) ((char *) param->u.crypt.key - (char *) param) + |
| param->u.crypt.key_len) |
| return -EINVAL; |
| |
| if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && |
| param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && |
| param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) { |
| if (param->u.crypt.idx >= WEP_KEYS) |
| return -EINVAL; |
| sta_ptr = NULL; |
| crypt = &local->crypt_info.crypt[param->u.crypt.idx]; |
| } else { |
| if (param->u.crypt.idx) |
| return -EINVAL; |
| sta_ptr = ap_crypt_get_ptrs( |
| local->ap, param->sta_addr, |
| (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_PERMANENT), |
| &crypt); |
| |
| if (sta_ptr == NULL) { |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; |
| return -EINVAL; |
| } |
| } |
| |
| if (strcmp(param->u.crypt.alg, "none") == 0) { |
| if (crypt) |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); |
| goto done; |
| } |
| |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); |
| if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { |
| request_module("lib80211_crypt_wep"); |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); |
| } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { |
| request_module("lib80211_crypt_tkip"); |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); |
| } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { |
| request_module("lib80211_crypt_ccmp"); |
| ops = lib80211_get_crypto_ops(param->u.crypt.alg); |
| } |
| if (ops == NULL) { |
| printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", |
| local->dev->name, param->u.crypt.alg); |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ALG; |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| /* station based encryption and other than WEP algorithms require |
| * host-based encryption, so force them on automatically */ |
| local->host_decrypt = local->host_encrypt = 1; |
| |
| if (*crypt == NULL || (*crypt)->ops != ops) { |
| struct lib80211_crypt_data *new_crypt; |
| |
| lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); |
| |
| new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), |
| GFP_KERNEL); |
| if (new_crypt == NULL) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| new_crypt->ops = ops; |
| new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); |
| if (new_crypt->priv == NULL) { |
| kfree(new_crypt); |
| param->u.crypt.err = |
| HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED; |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| *crypt = new_crypt; |
| } |
| |
| if ((!(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) || |
| param->u.crypt.key_len > 0) && (*crypt)->ops->set_key && |
| (*crypt)->ops->set_key(param->u.crypt.key, |
| param->u.crypt.key_len, param->u.crypt.seq, |
| (*crypt)->priv) < 0) { |
| printk(KERN_DEBUG "%s: key setting failed\n", |
| local->dev->name); |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED; |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) { |
| if (!sta_ptr) |
| local->crypt_info.tx_keyidx = param->u.crypt.idx; |
| else if (param->u.crypt.idx) { |
| printk(KERN_DEBUG "%s: TX key idx setting failed\n", |
| local->dev->name); |
| param->u.crypt.err = |
| HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED; |
| ret = -EINVAL; |
| goto done; |
| } |
| } |
| |
| done: |
| if (sta_ptr) |
| hostap_handle_sta_release(sta_ptr); |
| |
| /* Do not reset port0 if card is in Managed mode since resetting will |
| * generate new IEEE 802.11 authentication which may end up in looping |
| * with IEEE 802.1X. Prism2 documentation seem to require port reset |
| * after WEP configuration. However, keys are apparently changed at |
| * least in Managed mode. */ |
| if (ret == 0 && |
| (hostap_set_encryption(local) || |
| (local->iw_mode != IW_MODE_INFRA && |
| local->func->reset_port(local->dev)))) { |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_CARD_CONF_FAILED; |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| |
| static int prism2_ioctl_get_encryption(local_info_t *local, |
| struct prism2_hostapd_param *param, |
| int param_len) |
| { |
| struct lib80211_crypt_data **crypt; |
| void *sta_ptr; |
| int max_key_len; |
| |
| param->u.crypt.err = 0; |
| |
| max_key_len = param_len - |
| (int) ((char *) param->u.crypt.key - (char *) param); |
| if (max_key_len < 0) |
| return -EINVAL; |
| |
| if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && |
| param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && |
| param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) { |
| sta_ptr = NULL; |
| if (param->u.crypt.idx >= WEP_KEYS) |
| param->u.crypt.idx = local->crypt_info.tx_keyidx; |
| crypt = &local->crypt_info.crypt[param->u.crypt.idx]; |
| } else { |
| param->u.crypt.idx = 0; |
| sta_ptr = ap_crypt_get_ptrs(local->ap, param->sta_addr, 0, |
| &crypt); |
| |
| if (sta_ptr == NULL) { |
| param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; |
| return -EINVAL; |
| } |
| } |
| |
| if (*crypt == NULL || (*crypt)->ops == NULL) { |
| memcpy(param->u.crypt.alg, "none", 5); |
| param->u.crypt.key_len = 0; |
| param->u.crypt.idx = 0xff; |
| } else { |
| strncpy(param->u.crypt.alg, (*crypt)->ops->name, |
| HOSTAP_CRYPT_ALG_NAME_LEN); |
| param->u.crypt.key_len = 0; |
| |
| memset(param->u.crypt.seq, 0, 8); |
| if ((*crypt)->ops->get_key) { |
| param->u.crypt.key_len = |
| (*crypt)->ops->get_key(param->u.crypt.key, |
| max_key_len, |
| param->u.crypt.seq, |
| (*crypt)->priv); |
| } |
| } |
| |
| if (sta_ptr) |
| hostap_handle_sta_release(sta_ptr); |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_get_rid(local_info_t *local, |
| struct prism2_hostapd_param *param, |
| int param_len) |
| { |
| int max_len, res; |
| |
| max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; |
| if (max_len < 0) |
| return -EINVAL; |
| |
| res = local->func->get_rid(local->dev, param->u.rid.rid, |
| param->u.rid.data, param->u.rid.len, 0); |
| if (res >= 0) { |
| param->u.rid.len = res; |
| return 0; |
| } |
| |
| return res; |
| } |
| |
| |
| static int prism2_ioctl_set_rid(local_info_t *local, |
| struct prism2_hostapd_param *param, |
| int param_len) |
| { |
| int max_len; |
| |
| max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; |
| if (max_len < 0 || max_len < param->u.rid.len) |
| return -EINVAL; |
| |
| return local->func->set_rid(local->dev, param->u.rid.rid, |
| param->u.rid.data, param->u.rid.len); |
| } |
| |
| |
| static int prism2_ioctl_set_assoc_ap_addr(local_info_t *local, |
| struct prism2_hostapd_param *param, |
| int param_len) |
| { |
| printk(KERN_DEBUG "%ssta: associated as client with AP %pM\n", |
| local->dev->name, param->sta_addr); |
| memcpy(local->assoc_ap_addr, param->sta_addr, ETH_ALEN); |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_siwgenie(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| return prism2_set_genericelement(dev, extra, data->length); |
| } |
| |
| |
| static int prism2_ioctl_giwgenie(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| int len = local->generic_elem_len - 2; |
| |
| if (len <= 0 || local->generic_elem == NULL) { |
| data->length = 0; |
| return 0; |
| } |
| |
| if (data->length < len) |
| return -E2BIG; |
| |
| data->length = len; |
| memcpy(extra, local->generic_elem + 2, len); |
| |
| return 0; |
| } |
| |
| |
| static int prism2_ioctl_set_generic_element(local_info_t *local, |
| struct prism2_hostapd_param *param, |
| int param_len) |
| { |
| int max_len, len; |
| |
| len = param->u.generic_elem.len; |
| max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; |
| if (max_len < 0 || max_len < len) |
| return -EINVAL; |
| |
| return prism2_set_genericelement(local->dev, |
| param->u.generic_elem.data, len); |
| } |
| |
| |
| static int prism2_ioctl_siwmlme(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct hostap_interface *iface = netdev_priv(dev); |
| local_info_t *local = iface->local; |
| struct iw_mlme *mlme = (struct iw_mlme *) extra; |
| __le16 reason; |
| |
| reason = cpu_to_le16(mlme->reason_code); |
| |
| switch (mlme->cmd) { |
| case IW_MLME_DEAUTH: |
| return prism2_sta_send_mgmt(local, mlme->addr.sa_data, |
| IEEE80211_STYPE_DEAUTH, |
| (u8 *) &reason, 2); |
| case IW_MLME_DISASSOC: |
| return prism2_sta_send_mgmt(local, mlme->addr.sa_data, |
| IEEE80211_STYPE_DISASSOC, |
| (u8 *) &reason, 2); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| |
| static int prism2_ioctl_mlme(local_info_t *local, |
| struct prism2_hostapd_param *param) |
| { |
| __le16 reason; |
| |
| reason = cpu_to_le16(param->u.mlme.reason_code); |
| switch (param->u.mlme.cmd) { |
| case MLME_STA_DEAUTH: |
| return prism2_sta_send_mgmt(local, param->sta_addr, |
| IEEE80211_STYPE_DEAUTH, |
| (u8 *) &reason, 2); |
| case MLME_STA_DISASSOC: |
| return prism2_sta_send_mgmt(local, param->sta_addr, |
| IEEE80211_STYPE_DISASSOC, |
| (u8 *) &reason, 2); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| |
| static int prism2_ioctl_scan_req(local_info_t *local, |
| struct prism2_hostapd_param *param) |
| { |
| #ifndef PRISM2_NO_STATION_MODES |
| if ((local->iw_mode != IW_MODE_INFRA && |
| local->iw_mode != IW_MODE_ADHOC) || |
| (local->sta_fw_ver < PRISM2_FW_VER(1,3,1))) |
| return -EOPNOTSUPP; |
| |
| if (!local->dev_enabled) |
| return -ENETDOWN; |
| |
| return prism2_request_hostscan(local->dev, param->u.scan_req.ssid, |
| param->u.scan_req.ssid_len); |
| #else /* PRISM2_NO_STATION_MODES */ |
| return -EOPNOTSUPP; |
| #endif /* PRISM2_NO_STATION_MODES */ |
| } |
| |
| |
| static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) |
| { |
| struct prism2_hostapd_param *param; |
| int ret = 0; |
| int ap_ioctl = 0; |
| |
| if (p->length < sizeof(struct prism2_hostapd_param) || |
| p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) |
| return -EINVAL; |
| |
| param = kmalloc(p->length, GFP_KERNEL); |
| if (param == NULL) |
| return -ENOMEM; |
| |
| if (copy_from_user(param, p->pointer, p->length)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| switch (param->cmd) { |
| case PRISM2_SET_ENCRYPTION: |
| ret = prism2_ioctl_set_encryption(local, param, p->length); |
| break; |
| case PRISM2_GET_ENCRYPTION: |
| ret = prism2_ioctl_get_encryption(local, param, p->length); |
| break; |
| case PRISM2_HOSTAPD_GET_RID: |
| ret = prism2_ioctl_get_rid(local, param, p->length); |
| break; |
| case PRISM2_HOSTAPD_SET_RID: |
| ret = prism2_ioctl_set_rid(local, param, p->length); |
| break; |
| case PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR: |
| ret = prism2_ioctl_set_assoc_ap_addr(local, param, p->length); |
| break; |
| case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: |
| ret = prism2_ioctl_set_generic_element(local, param, |
| p->length); |
| break; |
| case PRISM2_HOSTAPD_MLME: |
| ret = prism2_ioctl_mlme(local, param); |
| break; |
| case PRISM2_HOSTAPD_SCAN_REQ: |
| ret = prism2_ioctl_scan_req(local, param); |
| break; |
| default: |
| ret = prism2_hostapd(local->ap, param); |
| ap_ioctl = 1; |
| break; |
| } |
| |
| if (ret == 1 || !ap_ioctl) { |
| if (copy_to_user(p->pointer, param, p->length)) { |
| ret = -EFAULT; |
| goto out; |
| } else if (ap_ioctl) |
| ret = 0; |
| } |
| |
| out: |
| kfree(param); |
| return ret; |
| } |
| |
| |
| static void prism2_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| struct hostap_interface *iface; |
| local_info_t *local; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| strncpy(info->driver, "hostap", sizeof(info->driver) - 1); |
| snprintf(info->fw_version, sizeof(info->fw_version) - 1, |
| "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff, |
| (local->sta_fw_ver >> 8) & 0xff, |
| local->sta_fw_ver & 0xff); |
| } |
| |
| const struct ethtool_ops prism2_ethtool_ops = { |
| .get_drvinfo = prism2_get_drvinfo |
| }; |
| |
| |
| /* Structures to export the Wireless Handlers */ |
| |
| static const iw_handler prism2_handler[] = |
| { |
| (iw_handler) NULL, /* SIOCSIWCOMMIT */ |
| (iw_handler) prism2_get_name, /* SIOCGIWNAME */ |
| (iw_handler) NULL, /* SIOCSIWNWID */ |
| (iw_handler) NULL, /* SIOCGIWNWID */ |
| (iw_handler) prism2_ioctl_siwfreq, /* SIOCSIWFREQ */ |
| (iw_handler) prism2_ioctl_giwfreq, /* SIOCGIWFREQ */ |
| (iw_handler) prism2_ioctl_siwmode, /* SIOCSIWMODE */ |
| (iw_handler) prism2_ioctl_giwmode, /* SIOCGIWMODE */ |
| (iw_handler) prism2_ioctl_siwsens, /* SIOCSIWSENS */ |
| (iw_handler) prism2_ioctl_giwsens, /* SIOCGIWSENS */ |
| (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */ |
| (iw_handler) prism2_ioctl_giwrange, /* SIOCGIWRANGE */ |
| (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */ |
| (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */ |
| (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */ |
| (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */ |
| iw_handler_set_spy, /* SIOCSIWSPY */ |
| iw_handler_get_spy, /* SIOCGIWSPY */ |
| iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ |
| iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ |
| (iw_handler) prism2_ioctl_siwap, /* SIOCSIWAP */ |
| (iw_handler) prism2_ioctl_giwap, /* SIOCGIWAP */ |
| (iw_handler) prism2_ioctl_siwmlme, /* SIOCSIWMLME */ |
| (iw_handler) prism2_ioctl_giwaplist, /* SIOCGIWAPLIST */ |
| (iw_handler) prism2_ioctl_siwscan, /* SIOCSIWSCAN */ |
| (iw_handler) prism2_ioctl_giwscan, /* SIOCGIWSCAN */ |
| (iw_handler) prism2_ioctl_siwessid, /* SIOCSIWESSID */ |
| (iw_handler) prism2_ioctl_giwessid, /* SIOCGIWESSID */ |
| (iw_handler) prism2_ioctl_siwnickn, /* SIOCSIWNICKN */ |
| (iw_handler) prism2_ioctl_giwnickn, /* SIOCGIWNICKN */ |
| (iw_handler) NULL, /* -- hole -- */ |
| (iw_handler) NULL, /* -- hole -- */ |
| (iw_handler) prism2_ioctl_siwrate, /* SIOCSIWRATE */ |
| (iw_handler) prism2_ioctl_giwrate, /* SIOCGIWRATE */ |
| (iw_handler) prism2_ioctl_siwrts, /* SIOCSIWRTS */ |
| (iw_handler) prism2_ioctl_giwrts, /* SIOCGIWRTS */ |
| (iw_handler) prism2_ioctl_siwfrag, /* SIOCSIWFRAG */ |
| (iw_handler) prism2_ioctl_giwfrag, /* SIOCGIWFRAG */ |
| (iw_handler) prism2_ioctl_siwtxpow, /* SIOCSIWTXPOW */ |
| (iw_handler) prism2_ioctl_giwtxpow, /* SIOCGIWTXPOW */ |
| (iw_handler) prism2_ioctl_siwretry, /* SIOCSIWRETRY */ |
| (iw_handler) prism2_ioctl_giwretry, /* SIOCGIWRETRY */ |
| (iw_handler) prism2_ioctl_siwencode, /* SIOCSIWENCODE */ |
| (iw_handler) prism2_ioctl_giwencode, /* SIOCGIWENCODE */ |
| (iw_handler) prism2_ioctl_siwpower, /* SIOCSIWPOWER */ |
| (iw_handler) prism2_ioctl_giwpower, /* SIOCGIWPOWER */ |
| (iw_handler) NULL, /* -- hole -- */ |
| (iw_handler) NULL, /* -- hole -- */ |
| (iw_handler) prism2_ioctl_siwgenie, /* SIOCSIWGENIE */ |
| (iw_handler) prism2_ioctl_giwgenie, /* SIOCGIWGENIE */ |
| (iw_handler) prism2_ioctl_siwauth, /* SIOCSIWAUTH */ |
| (iw_handler) prism2_ioctl_giwauth, /* SIOCGIWAUTH */ |
| (iw_handler) prism2_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */ |
| (iw_handler) prism2_ioctl_giwencodeext, /* SIOCGIWENCODEEXT */ |
| (iw_handler) NULL, /* SIOCSIWPMKSA */ |
| (iw_handler) NULL, /* -- hole -- */ |
| }; |
| |
| static const iw_handler prism2_private_handler[] = |
| { /* SIOCIWFIRSTPRIV + */ |
| (iw_handler) prism2_ioctl_priv_prism2_param, /* 0 */ |
| (iw_handler) prism2_ioctl_priv_get_prism2_param, /* 1 */ |
| (iw_handler) prism2_ioctl_priv_writemif, /* 2 */ |
| (iw_handler) prism2_ioctl_priv_readmif, /* 3 */ |
| }; |
| |
| const struct iw_handler_def hostap_iw_handler_def = |
| { |
| .num_standard = ARRAY_SIZE(prism2_handler), |
| .num_private = ARRAY_SIZE(prism2_private_handler), |
| .num_private_args = ARRAY_SIZE(prism2_priv), |
| .standard = (iw_handler *) prism2_handler, |
| .private = (iw_handler *) prism2_private_handler, |
| .private_args = (struct iw_priv_args *) prism2_priv, |
| .get_wireless_stats = hostap_get_wireless_stats, |
| }; |
| |
| |
| int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| struct iwreq *wrq = (struct iwreq *) ifr; |
| struct hostap_interface *iface; |
| local_info_t *local; |
| int ret = 0; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| |
| switch (cmd) { |
| /* Private ioctls (iwpriv) that have not yet been converted |
| * into new wireless extensions API */ |
| |
| case PRISM2_IOCTL_INQUIRE: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_ioctl_priv_inquire(dev, (int *) wrq->u.name); |
| break; |
| |
| case PRISM2_IOCTL_MONITOR: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_ioctl_priv_monitor(dev, (int *) wrq->u.name); |
| break; |
| |
| case PRISM2_IOCTL_RESET: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_ioctl_priv_reset(dev, (int *) wrq->u.name); |
| break; |
| |
| case PRISM2_IOCTL_WDS_ADD: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_wds_add(local, wrq->u.ap_addr.sa_data, 1); |
| break; |
| |
| case PRISM2_IOCTL_WDS_DEL: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_wds_del(local, wrq->u.ap_addr.sa_data, 1, 0); |
| break; |
| |
| case PRISM2_IOCTL_SET_RID_WORD: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_ioctl_priv_set_rid_word(dev, |
| (int *) wrq->u.name); |
| break; |
| |
| #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT |
| case PRISM2_IOCTL_MACCMD: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = ap_mac_cmd_ioctl(local, (int *) wrq->u.name); |
| break; |
| |
| case PRISM2_IOCTL_ADDMAC: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = ap_control_add_mac(&local->ap->mac_restrictions, |
| wrq->u.ap_addr.sa_data); |
| break; |
| case PRISM2_IOCTL_DELMAC: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = ap_control_del_mac(&local->ap->mac_restrictions, |
| wrq->u.ap_addr.sa_data); |
| break; |
| case PRISM2_IOCTL_KICKMAC: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = ap_control_kick_mac(local->ap, local->dev, |
| wrq->u.ap_addr.sa_data); |
| break; |
| #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ |
| |
| |
| /* Private ioctls that are not used with iwpriv; |
| * in SIOCDEVPRIVATE range */ |
| |
| #ifdef PRISM2_DOWNLOAD_SUPPORT |
| case PRISM2_IOCTL_DOWNLOAD: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_ioctl_priv_download(local, &wrq->u.data); |
| break; |
| #endif /* PRISM2_DOWNLOAD_SUPPORT */ |
| |
| case PRISM2_IOCTL_HOSTAPD: |
| if (!capable(CAP_NET_ADMIN)) ret = -EPERM; |
| else ret = prism2_ioctl_priv_hostapd(local, &wrq->u.data); |
| break; |
| |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |