| /** |
| * This file contains the handling of TX in wlan driver. |
| */ |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| |
| #include "hostcmd.h" |
| #include "radiotap.h" |
| #include "decl.h" |
| #include "defs.h" |
| #include "dev.h" |
| #include "wext.h" |
| |
| /** |
| * @brief This function converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE |
| * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1) |
| * |
| * @param rate Input rate |
| * @return Output Rate (0 if invalid) |
| */ |
| static u32 convert_radiotap_rate_to_mv(u8 rate) |
| { |
| switch (rate) { |
| case 2: /* 1 Mbps */ |
| return 0 | (1 << 4); |
| case 4: /* 2 Mbps */ |
| return 1 | (1 << 4); |
| case 11: /* 5.5 Mbps */ |
| return 2 | (1 << 4); |
| case 22: /* 11 Mbps */ |
| return 3 | (1 << 4); |
| case 12: /* 6 Mbps */ |
| return 4 | (1 << 4); |
| case 18: /* 9 Mbps */ |
| return 5 | (1 << 4); |
| case 24: /* 12 Mbps */ |
| return 6 | (1 << 4); |
| case 36: /* 18 Mbps */ |
| return 7 | (1 << 4); |
| case 48: /* 24 Mbps */ |
| return 8 | (1 << 4); |
| case 72: /* 36 Mbps */ |
| return 9 | (1 << 4); |
| case 96: /* 48 Mbps */ |
| return 10 | (1 << 4); |
| case 108: /* 54 Mbps */ |
| return 11 | (1 << 4); |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief This function checks the conditions and sends packet to IF |
| * layer if everything is ok. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param skb A pointer to skb which includes TX packet |
| * @return 0 or -1 |
| */ |
| int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| unsigned long flags; |
| struct lbs_private *priv = dev->priv; |
| struct txpd *txpd; |
| char *p802x_hdr; |
| uint16_t pkt_len; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_TX); |
| |
| ret = NETDEV_TX_OK; |
| |
| /* We need to protect against the queues being restarted before |
| we get round to stopping them */ |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| if (priv->surpriseremoved) |
| goto free; |
| |
| if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) { |
| lbs_deb_tx("tx err: skb length %d 0 or > %zd\n", |
| skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE); |
| /* We'll never manage to send this one; drop it and return 'OK' */ |
| |
| priv->stats.tx_dropped++; |
| priv->stats.tx_errors++; |
| goto free; |
| } |
| |
| |
| netif_stop_queue(priv->dev); |
| if (priv->mesh_dev) |
| netif_stop_queue(priv->mesh_dev); |
| |
| if (priv->tx_pending_len) { |
| /* This can happen if packets come in on the mesh and eth |
| device simultaneously -- there's no mutual exclusion on |
| hard_start_xmit() calls between devices. */ |
| lbs_deb_tx("Packet on %s while busy\n", dev->name); |
| ret = NETDEV_TX_BUSY; |
| goto unlock; |
| } |
| |
| priv->tx_pending_len = -1; |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| lbs_deb_hex(LBS_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100)); |
| |
| txpd = (void *)priv->tx_pending_buf; |
| memset(txpd, 0, sizeof(struct txpd)); |
| |
| p802x_hdr = skb->data; |
| pkt_len = skb->len; |
| |
| if (dev == priv->rtap_net_dev) { |
| struct tx_radiotap_hdr *rtap_hdr = (void *)skb->data; |
| |
| /* set txpd fields from the radiotap header */ |
| txpd->tx_control = cpu_to_le32(convert_radiotap_rate_to_mv(rtap_hdr->rate)); |
| |
| /* skip the radiotap header */ |
| p802x_hdr += sizeof(*rtap_hdr); |
| pkt_len -= sizeof(*rtap_hdr); |
| |
| /* copy destination address from 802.11 header */ |
| memcpy(txpd->tx_dest_addr_high, p802x_hdr + 4, ETH_ALEN); |
| } else { |
| /* copy destination address from 802.3 header */ |
| memcpy(txpd->tx_dest_addr_high, p802x_hdr, ETH_ALEN); |
| } |
| |
| txpd->tx_packet_length = cpu_to_le16(pkt_len); |
| txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); |
| |
| if (dev == priv->mesh_dev) |
| txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME); |
| |
| lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd)); |
| |
| lbs_deb_hex(LBS_DEB_TX, "Tx Data", (u8 *) p802x_hdr, le16_to_cpu(txpd->tx_packet_length)); |
| |
| memcpy(&txpd[1], p802x_hdr, le16_to_cpu(txpd->tx_packet_length)); |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| priv->tx_pending_len = pkt_len + sizeof(struct txpd); |
| |
| lbs_deb_tx("%s lined up packet\n", __func__); |
| |
| priv->stats.tx_packets++; |
| priv->stats.tx_bytes += skb->len; |
| |
| dev->trans_start = jiffies; |
| |
| if (priv->monitormode) { |
| /* Keep the skb to echo it back once Tx feedback is |
| received from FW */ |
| skb_orphan(skb); |
| |
| /* Keep the skb around for when we get feedback */ |
| priv->currenttxskb = skb; |
| } else { |
| free: |
| dev_kfree_skb_any(skb); |
| } |
| unlock: |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| wake_up(&priv->waitq); |
| |
| lbs_deb_leave_args(LBS_DEB_TX, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief This function sends to the host the last transmitted packet, |
| * filling the radiotap headers with transmission information. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param status A 32 bit value containing transmission status. |
| * |
| * @returns void |
| */ |
| void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count) |
| { |
| struct tx_radiotap_hdr *radiotap_hdr; |
| |
| if (!priv->monitormode || priv->currenttxskb == NULL) |
| return; |
| |
| radiotap_hdr = (struct tx_radiotap_hdr *)priv->currenttxskb->data; |
| |
| radiotap_hdr->data_retries = try_count ? |
| (1 + priv->txretrycount - try_count) : 0; |
| |
| priv->currenttxskb->protocol = eth_type_trans(priv->currenttxskb, |
| priv->rtap_net_dev); |
| netif_rx(priv->currenttxskb); |
| |
| priv->currenttxskb = NULL; |
| |
| if (priv->connect_status == LBS_CONNECTED) |
| netif_wake_queue(priv->dev); |
| |
| if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) |
| netif_wake_queue(priv->mesh_dev); |
| } |
| EXPORT_SYMBOL_GPL(lbs_send_tx_feedback); |