| /* |
| * Copyright (c) by Jaroslav Kysela <perex@perex.cz> |
| * Universal interface for Audio Codec '97 |
| * |
| * For more details look to AC '97 component specification revision 2.2 |
| * by Intel Corporation (http://developer.intel.com) and to datasheets |
| * for specific codecs. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include "ac97_local.h" |
| #include "ac97_patch.h" |
| |
| /* |
| * Forward declarations |
| */ |
| |
| static struct snd_kcontrol *snd_ac97_find_mixer_ctl(struct snd_ac97 *ac97, |
| const char *name); |
| static int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name, |
| const unsigned int *tlv, const char **slaves); |
| |
| /* |
| * Chip specific initialization |
| */ |
| |
| static int patch_build_controls(struct snd_ac97 * ac97, const struct snd_kcontrol_new *controls, int count) |
| { |
| int idx, err; |
| |
| for (idx = 0; idx < count; idx++) |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&controls[idx], ac97))) < 0) |
| return err; |
| return 0; |
| } |
| |
| /* replace with a new TLV */ |
| static void reset_tlv(struct snd_ac97 *ac97, const char *name, |
| const unsigned int *tlv) |
| { |
| struct snd_ctl_elem_id sid; |
| struct snd_kcontrol *kctl; |
| memset(&sid, 0, sizeof(sid)); |
| strcpy(sid.name, name); |
| sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| kctl = snd_ctl_find_id(ac97->bus->card, &sid); |
| if (kctl && kctl->tlv.p) |
| kctl->tlv.p = tlv; |
| } |
| |
| /* set to the page, update bits and restore the page */ |
| static int ac97_update_bits_page(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value, unsigned short page) |
| { |
| unsigned short page_save; |
| int ret; |
| |
| mutex_lock(&ac97->page_mutex); |
| page_save = snd_ac97_read(ac97, AC97_INT_PAGING) & AC97_PAGE_MASK; |
| snd_ac97_update_bits(ac97, AC97_INT_PAGING, AC97_PAGE_MASK, page); |
| ret = snd_ac97_update_bits(ac97, reg, mask, value); |
| snd_ac97_update_bits(ac97, AC97_INT_PAGING, AC97_PAGE_MASK, page_save); |
| mutex_unlock(&ac97->page_mutex); /* unlock paging */ |
| return ret; |
| } |
| |
| /* |
| * shared line-in/mic controls |
| */ |
| static int ac97_enum_text_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo, |
| const char **texts, unsigned int nums) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = nums; |
| if (uinfo->value.enumerated.item > nums - 1) |
| uinfo->value.enumerated.item = nums - 1; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int ac97_surround_jack_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *texts[] = { "Shared", "Independent" }; |
| return ac97_enum_text_info(kcontrol, uinfo, texts, 2); |
| } |
| |
| static int ac97_surround_jack_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| ucontrol->value.enumerated.item[0] = ac97->indep_surround; |
| return 0; |
| } |
| |
| static int ac97_surround_jack_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned char indep = !!ucontrol->value.enumerated.item[0]; |
| |
| if (indep != ac97->indep_surround) { |
| ac97->indep_surround = indep; |
| if (ac97->build_ops->update_jacks) |
| ac97->build_ops->update_jacks(ac97); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int ac97_channel_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *texts[] = { "2ch", "4ch", "6ch", "8ch" }; |
| return ac97_enum_text_info(kcontrol, uinfo, texts, |
| kcontrol->private_value); |
| } |
| |
| static int ac97_channel_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| ucontrol->value.enumerated.item[0] = ac97->channel_mode; |
| return 0; |
| } |
| |
| static int ac97_channel_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned char mode = ucontrol->value.enumerated.item[0]; |
| |
| if (mode >= kcontrol->private_value) |
| return -EINVAL; |
| |
| if (mode != ac97->channel_mode) { |
| ac97->channel_mode = mode; |
| if (ac97->build_ops->update_jacks) |
| ac97->build_ops->update_jacks(ac97); |
| return 1; |
| } |
| return 0; |
| } |
| |
| #define AC97_SURROUND_JACK_MODE_CTL \ |
| { \ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = "Surround Jack Mode", \ |
| .info = ac97_surround_jack_mode_info, \ |
| .get = ac97_surround_jack_mode_get, \ |
| .put = ac97_surround_jack_mode_put, \ |
| } |
| /* 6ch */ |
| #define AC97_CHANNEL_MODE_CTL \ |
| { \ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = "Channel Mode", \ |
| .info = ac97_channel_mode_info, \ |
| .get = ac97_channel_mode_get, \ |
| .put = ac97_channel_mode_put, \ |
| .private_value = 3, \ |
| } |
| /* 4ch */ |
| #define AC97_CHANNEL_MODE_4CH_CTL \ |
| { \ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = "Channel Mode", \ |
| .info = ac97_channel_mode_info, \ |
| .get = ac97_channel_mode_get, \ |
| .put = ac97_channel_mode_put, \ |
| .private_value = 2, \ |
| } |
| /* 8ch */ |
| #define AC97_CHANNEL_MODE_8CH_CTL \ |
| { \ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = "Channel Mode", \ |
| .info = ac97_channel_mode_info, \ |
| .get = ac97_channel_mode_get, \ |
| .put = ac97_channel_mode_put, \ |
| .private_value = 4, \ |
| } |
| |
| static inline int is_surround_on(struct snd_ac97 *ac97) |
| { |
| return ac97->channel_mode >= 1; |
| } |
| |
| static inline int is_clfe_on(struct snd_ac97 *ac97) |
| { |
| return ac97->channel_mode >= 2; |
| } |
| |
| /* system has shared jacks with surround out enabled */ |
| static inline int is_shared_surrout(struct snd_ac97 *ac97) |
| { |
| return !ac97->indep_surround && is_surround_on(ac97); |
| } |
| |
| /* system has shared jacks with center/lfe out enabled */ |
| static inline int is_shared_clfeout(struct snd_ac97 *ac97) |
| { |
| return !ac97->indep_surround && is_clfe_on(ac97); |
| } |
| |
| /* system has shared jacks with line in enabled */ |
| static inline int is_shared_linein(struct snd_ac97 *ac97) |
| { |
| return !ac97->indep_surround && !is_surround_on(ac97); |
| } |
| |
| /* system has shared jacks with mic in enabled */ |
| static inline int is_shared_micin(struct snd_ac97 *ac97) |
| { |
| return !ac97->indep_surround && !is_clfe_on(ac97); |
| } |
| |
| static inline int alc850_is_aux_back_surround(struct snd_ac97 *ac97) |
| { |
| return is_surround_on(ac97); |
| } |
| |
| /* The following snd_ac97_ymf753_... items added by David Shust (dshust@shustring.com) */ |
| /* Modified for YMF743 by Keita Maehara <maehara@debian.org> */ |
| |
| /* It is possible to indicate to the Yamaha YMF7x3 the type of |
| speakers being used. */ |
| |
| static int snd_ac97_ymf7x3_info_speaker(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[3] = { |
| "Standard", "Small", "Smaller" |
| }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 3; |
| if (uinfo->value.enumerated.item > 2) |
| uinfo->value.enumerated.item = 2; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_ymf7x3_get_speaker(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_YMF7X3_3D_MODE_SEL]; |
| val = (val >> 10) & 3; |
| if (val > 0) /* 0 = invalid */ |
| val--; |
| ucontrol->value.enumerated.item[0] = val; |
| return 0; |
| } |
| |
| static int snd_ac97_ymf7x3_put_speaker(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 2) |
| return -EINVAL; |
| val = (ucontrol->value.enumerated.item[0] + 1) << 10; |
| return snd_ac97_update(ac97, AC97_YMF7X3_3D_MODE_SEL, val); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ymf7x3_controls_speaker = |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "3D Control - Speaker", |
| .info = snd_ac97_ymf7x3_info_speaker, |
| .get = snd_ac97_ymf7x3_get_speaker, |
| .put = snd_ac97_ymf7x3_put_speaker, |
| }; |
| |
| /* It is possible to indicate to the Yamaha YMF7x3 the source to |
| direct to the S/PDIF output. */ |
| static int snd_ac97_ymf7x3_spdif_source_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[2] = { "AC-Link", "A/D Converter" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 2; |
| if (uinfo->value.enumerated.item > 1) |
| uinfo->value.enumerated.item = 1; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_ymf7x3_spdif_source_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_YMF7X3_DIT_CTRL]; |
| ucontrol->value.enumerated.item[0] = (val >> 1) & 1; |
| return 0; |
| } |
| |
| static int snd_ac97_ymf7x3_spdif_source_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 1) |
| return -EINVAL; |
| val = ucontrol->value.enumerated.item[0] << 1; |
| return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0002, val); |
| } |
| |
| static int patch_yamaha_ymf7x3_3d(struct snd_ac97 *ac97) |
| { |
| struct snd_kcontrol *kctl; |
| int err; |
| |
| kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97); |
| err = snd_ctl_add(ac97->bus->card, kctl); |
| if (err < 0) |
| return err; |
| strcpy(kctl->id.name, "3D Control - Wide"); |
| kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0); |
| snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000); |
| err = snd_ctl_add(ac97->bus->card, |
| snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker, |
| ac97)); |
| if (err < 0) |
| return err; |
| snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00); |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_yamaha_ymf743_controls_spdif[3] = |
| { |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH), |
| AC97_YMF7X3_DIT_CTRL, 0, 1, 0), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, NONE) "Source", |
| .info = snd_ac97_ymf7x3_spdif_source_info, |
| .get = snd_ac97_ymf7x3_spdif_source_get, |
| .put = snd_ac97_ymf7x3_spdif_source_put, |
| }, |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("", NONE, NONE) "Mute", |
| AC97_YMF7X3_DIT_CTRL, 2, 1, 1) |
| }; |
| |
| static int patch_yamaha_ymf743_build_spdif(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| err = patch_build_controls(ac97, &snd_ac97_controls_spdif[0], 3); |
| if (err < 0) |
| return err; |
| err = patch_build_controls(ac97, |
| snd_ac97_yamaha_ymf743_controls_spdif, 3); |
| if (err < 0) |
| return err; |
| /* set default PCM S/PDIF params */ |
| /* PCM audio,no copyright,no preemphasis,PCM coder,original */ |
| snd_ac97_write_cache(ac97, AC97_YMF7X3_DIT_CTRL, 0xa201); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_yamaha_ymf743_ops = { |
| .build_spdif = patch_yamaha_ymf743_build_spdif, |
| .build_3d = patch_yamaha_ymf7x3_3d, |
| }; |
| |
| static int patch_yamaha_ymf743(struct snd_ac97 *ac97) |
| { |
| ac97->build_ops = &patch_yamaha_ymf743_ops; |
| ac97->caps |= AC97_BC_BASS_TREBLE; |
| ac97->caps |= 0x04 << 10; /* Yamaha 3D enhancement */ |
| ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */ |
| ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */ |
| return 0; |
| } |
| |
| /* The AC'97 spec states that the S/PDIF signal is to be output at pin 48. |
| The YMF753 will output the S/PDIF signal to pin 43, 47 (EAPD), or 48. |
| By default, no output pin is selected, and the S/PDIF signal is not output. |
| There is also a bit to mute S/PDIF output in a vendor-specific register. */ |
| static int snd_ac97_ymf753_spdif_output_pin_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[3] = { "Disabled", "Pin 43", "Pin 48" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 3; |
| if (uinfo->value.enumerated.item > 2) |
| uinfo->value.enumerated.item = 2; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_ymf753_spdif_output_pin_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_YMF7X3_DIT_CTRL]; |
| ucontrol->value.enumerated.item[0] = (val & 0x0008) ? 2 : (val & 0x0020) ? 1 : 0; |
| return 0; |
| } |
| |
| static int snd_ac97_ymf753_spdif_output_pin_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 2) |
| return -EINVAL; |
| val = (ucontrol->value.enumerated.item[0] == 2) ? 0x0008 : |
| (ucontrol->value.enumerated.item[0] == 1) ? 0x0020 : 0; |
| return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0028, val); |
| /* The following can be used to direct S/PDIF output to pin 47 (EAPD). |
| snd_ac97_write_cache(ac97, 0x62, snd_ac97_read(ac97, 0x62) | 0x0008); */ |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ymf753_controls_spdif[3] = { |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source", |
| .info = snd_ac97_ymf7x3_spdif_source_info, |
| .get = snd_ac97_ymf7x3_spdif_source_get, |
| .put = snd_ac97_ymf7x3_spdif_source_put, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Output Pin", |
| .info = snd_ac97_ymf753_spdif_output_pin_info, |
| .get = snd_ac97_ymf753_spdif_output_pin_get, |
| .put = snd_ac97_ymf753_spdif_output_pin_put, |
| }, |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("", NONE, NONE) "Mute", |
| AC97_YMF7X3_DIT_CTRL, 2, 1, 1) |
| }; |
| |
| static int patch_yamaha_ymf753_post_spdif(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, snd_ac97_ymf753_controls_spdif, ARRAY_SIZE(snd_ac97_ymf753_controls_spdif))) < 0) |
| return err; |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_yamaha_ymf753_ops = { |
| .build_3d = patch_yamaha_ymf7x3_3d, |
| .build_post_spdif = patch_yamaha_ymf753_post_spdif |
| }; |
| |
| static int patch_yamaha_ymf753(struct snd_ac97 * ac97) |
| { |
| /* Patch for Yamaha YMF753, Copyright (c) by David Shust, dshust@shustring.com. |
| This chip has nonstandard and extended behaviour with regard to its S/PDIF output. |
| The AC'97 spec states that the S/PDIF signal is to be output at pin 48. |
| The YMF753 will ouput the S/PDIF signal to pin 43, 47 (EAPD), or 48. |
| By default, no output pin is selected, and the S/PDIF signal is not output. |
| There is also a bit to mute S/PDIF output in a vendor-specific register. |
| */ |
| ac97->build_ops = &patch_yamaha_ymf753_ops; |
| ac97->caps |= AC97_BC_BASS_TREBLE; |
| ac97->caps |= 0x04 << 10; /* Yamaha 3D enhancement */ |
| return 0; |
| } |
| |
| /* |
| * May 2, 2003 Liam Girdwood <lrg@slimlogic.co.uk> |
| * removed broken wolfson00 patch. |
| * added support for WM9705,WM9708,WM9709,WM9710,WM9711,WM9712 and WM9717. |
| */ |
| |
| static const struct snd_kcontrol_new wm97xx_snd_ac97_controls[] = { |
| AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), |
| AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), |
| }; |
| |
| static int patch_wolfson_wm9703_specific(struct snd_ac97 * ac97) |
| { |
| /* This is known to work for the ViewSonic ViewPad 1000 |
| * Randolph Bentson <bentson@holmsjoen.com> |
| * WM9703/9707/9708/9717 |
| */ |
| int err, i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm97xx_snd_ac97_controls[i], ac97))) < 0) |
| return err; |
| } |
| snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_wolfson_wm9703_ops = { |
| .build_specific = patch_wolfson_wm9703_specific, |
| }; |
| |
| static int patch_wolfson03(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_wolfson_wm9703_ops; |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new wm9704_snd_ac97_controls[] = { |
| AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), |
| AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), |
| AC97_DOUBLE("Rear Playback Volume", AC97_WM9704_RMIXER_VOL, 8, 0, 31, 1), |
| AC97_SINGLE("Rear Playback Switch", AC97_WM9704_RMIXER_VOL, 15, 1, 1), |
| AC97_DOUBLE("Rear DAC Volume", AC97_WM9704_RPCM_VOL, 8, 0, 31, 1), |
| AC97_DOUBLE("Surround Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), |
| }; |
| |
| static int patch_wolfson_wm9704_specific(struct snd_ac97 * ac97) |
| { |
| int err, i; |
| for (i = 0; i < ARRAY_SIZE(wm9704_snd_ac97_controls); i++) { |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm9704_snd_ac97_controls[i], ac97))) < 0) |
| return err; |
| } |
| /* patch for DVD noise */ |
| snd_ac97_write_cache(ac97, AC97_WM9704_TEST, 0x0200); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_wolfson_wm9704_ops = { |
| .build_specific = patch_wolfson_wm9704_specific, |
| }; |
| |
| static int patch_wolfson04(struct snd_ac97 * ac97) |
| { |
| /* WM9704M/9704Q */ |
| ac97->build_ops = &patch_wolfson_wm9704_ops; |
| return 0; |
| } |
| |
| static int patch_wolfson05(struct snd_ac97 * ac97) |
| { |
| /* WM9705, WM9710 */ |
| ac97->build_ops = &patch_wolfson_wm9703_ops; |
| #ifdef CONFIG_TOUCHSCREEN_WM9705 |
| /* WM9705 touchscreen uses AUX and VIDEO for touch */ |
| ac97->flags |= AC97_HAS_NO_VIDEO | AC97_HAS_NO_AUX; |
| #endif |
| return 0; |
| } |
| |
| static const char* wm9711_alc_select[] = {"None", "Left", "Right", "Stereo"}; |
| static const char* wm9711_alc_mix[] = {"Stereo", "Right", "Left", "None"}; |
| static const char* wm9711_out3_src[] = {"Left", "VREF", "Left + Right", "Mono"}; |
| static const char* wm9711_out3_lrsrc[] = {"Master Mix", "Headphone Mix"}; |
| static const char* wm9711_rec_adc[] = {"Stereo", "Left", "Right", "Mute"}; |
| static const char* wm9711_base[] = {"Linear Control", "Adaptive Boost"}; |
| static const char* wm9711_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; |
| static const char* wm9711_mic[] = {"Mic 1", "Differential", "Mic 2", "Stereo"}; |
| static const char* wm9711_rec_sel[] = |
| {"Mic 1", "NC", "NC", "Master Mix", "Line", "Headphone Mix", "Phone Mix", "Phone"}; |
| static const char* wm9711_ng_type[] = {"Constant Gain", "Mute"}; |
| |
| static const struct ac97_enum wm9711_enum[] = { |
| AC97_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9711_alc_select), |
| AC97_ENUM_SINGLE(AC97_VIDEO, 10, 4, wm9711_alc_mix), |
| AC97_ENUM_SINGLE(AC97_AUX, 9, 4, wm9711_out3_src), |
| AC97_ENUM_SINGLE(AC97_AUX, 8, 2, wm9711_out3_lrsrc), |
| AC97_ENUM_SINGLE(AC97_REC_SEL, 12, 4, wm9711_rec_adc), |
| AC97_ENUM_SINGLE(AC97_MASTER_TONE, 15, 2, wm9711_base), |
| AC97_ENUM_DOUBLE(AC97_REC_GAIN, 14, 6, 2, wm9711_rec_gain), |
| AC97_ENUM_SINGLE(AC97_MIC, 5, 4, wm9711_mic), |
| AC97_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, wm9711_rec_sel), |
| AC97_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9711_ng_type), |
| }; |
| |
| static const struct snd_kcontrol_new wm9711_snd_ac97_controls[] = { |
| AC97_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), |
| AC97_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), |
| AC97_SINGLE("ALC Decay Time", AC97_CODEC_CLASS_REV, 4, 15, 0), |
| AC97_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), |
| AC97_ENUM("ALC Function", wm9711_enum[0]), |
| AC97_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 1), |
| AC97_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 1), |
| AC97_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), |
| AC97_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), |
| AC97_ENUM("ALC NG Type", wm9711_enum[9]), |
| AC97_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 1), |
| |
| AC97_SINGLE("Side Tone Switch", AC97_VIDEO, 15, 1, 1), |
| AC97_SINGLE("Side Tone Volume", AC97_VIDEO, 12, 7, 1), |
| AC97_ENUM("ALC Headphone Mux", wm9711_enum[1]), |
| AC97_SINGLE("ALC Headphone Volume", AC97_VIDEO, 7, 7, 1), |
| |
| AC97_SINGLE("Out3 Switch", AC97_AUX, 15, 1, 1), |
| AC97_SINGLE("Out3 ZC Switch", AC97_AUX, 7, 1, 0), |
| AC97_ENUM("Out3 Mux", wm9711_enum[2]), |
| AC97_ENUM("Out3 LR Mux", wm9711_enum[3]), |
| AC97_SINGLE("Out3 Volume", AC97_AUX, 0, 31, 1), |
| |
| AC97_SINGLE("Beep to Headphone Switch", AC97_PC_BEEP, 15, 1, 1), |
| AC97_SINGLE("Beep to Headphone Volume", AC97_PC_BEEP, 12, 7, 1), |
| AC97_SINGLE("Beep to Side Tone Switch", AC97_PC_BEEP, 11, 1, 1), |
| AC97_SINGLE("Beep to Side Tone Volume", AC97_PC_BEEP, 8, 7, 1), |
| AC97_SINGLE("Beep to Phone Switch", AC97_PC_BEEP, 7, 1, 1), |
| AC97_SINGLE("Beep to Phone Volume", AC97_PC_BEEP, 4, 7, 1), |
| |
| AC97_SINGLE("Aux to Headphone Switch", AC97_CD, 15, 1, 1), |
| AC97_SINGLE("Aux to Headphone Volume", AC97_CD, 12, 7, 1), |
| AC97_SINGLE("Aux to Side Tone Switch", AC97_CD, 11, 1, 1), |
| AC97_SINGLE("Aux to Side Tone Volume", AC97_CD, 8, 7, 1), |
| AC97_SINGLE("Aux to Phone Switch", AC97_CD, 7, 1, 1), |
| AC97_SINGLE("Aux to Phone Volume", AC97_CD, 4, 7, 1), |
| |
| AC97_SINGLE("Phone to Headphone Switch", AC97_PHONE, 15, 1, 1), |
| AC97_SINGLE("Phone to Master Switch", AC97_PHONE, 14, 1, 1), |
| |
| AC97_SINGLE("Line to Headphone Switch", AC97_LINE, 15, 1, 1), |
| AC97_SINGLE("Line to Master Switch", AC97_LINE, 14, 1, 1), |
| AC97_SINGLE("Line to Phone Switch", AC97_LINE, 13, 1, 1), |
| |
| AC97_SINGLE("PCM Playback to Headphone Switch", AC97_PCM, 15, 1, 1), |
| AC97_SINGLE("PCM Playback to Master Switch", AC97_PCM, 14, 1, 1), |
| AC97_SINGLE("PCM Playback to Phone Switch", AC97_PCM, 13, 1, 1), |
| |
| AC97_SINGLE("Capture 20dB Boost Switch", AC97_REC_SEL, 14, 1, 0), |
| AC97_ENUM("Capture to Phone Mux", wm9711_enum[4]), |
| AC97_SINGLE("Capture to Phone 20dB Boost Switch", AC97_REC_SEL, 11, 1, 1), |
| AC97_ENUM("Capture Select", wm9711_enum[8]), |
| |
| AC97_SINGLE("3D Upper Cut-off Switch", AC97_3D_CONTROL, 5, 1, 1), |
| AC97_SINGLE("3D Lower Cut-off Switch", AC97_3D_CONTROL, 4, 1, 1), |
| |
| AC97_ENUM("Bass Control", wm9711_enum[5]), |
| AC97_SINGLE("Bass Cut-off Switch", AC97_MASTER_TONE, 12, 1, 1), |
| AC97_SINGLE("Tone Cut-off Switch", AC97_MASTER_TONE, 4, 1, 1), |
| AC97_SINGLE("Playback Attenuate (-6dB) Switch", AC97_MASTER_TONE, 6, 1, 0), |
| |
| AC97_SINGLE("ADC Switch", AC97_REC_GAIN, 15, 1, 1), |
| AC97_ENUM("Capture Volume Steps", wm9711_enum[6]), |
| AC97_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 63, 1), |
| AC97_SINGLE("Capture ZC Switch", AC97_REC_GAIN, 7, 1, 0), |
| |
| AC97_SINGLE("Mic 1 to Phone Switch", AC97_MIC, 14, 1, 1), |
| AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1), |
| AC97_ENUM("Mic Select Source", wm9711_enum[7]), |
| AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1), |
| AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), |
| AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0), |
| |
| AC97_SINGLE("Master Left Inv Switch", AC97_MASTER, 6, 1, 0), |
| AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0), |
| AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), |
| AC97_SINGLE("Mono ZC Switch", AC97_MASTER_MONO, 7, 1, 0), |
| }; |
| |
| static int patch_wolfson_wm9711_specific(struct snd_ac97 * ac97) |
| { |
| int err, i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm9711_snd_ac97_controls); i++) { |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm9711_snd_ac97_controls[i], ac97))) < 0) |
| return err; |
| } |
| snd_ac97_write_cache(ac97, AC97_CODEC_CLASS_REV, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_PCI_SVID, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_VIDEO, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_AUX, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_CD, 0x0000); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_wolfson_wm9711_ops = { |
| .build_specific = patch_wolfson_wm9711_specific, |
| }; |
| |
| static int patch_wolfson11(struct snd_ac97 * ac97) |
| { |
| /* WM9711, WM9712 */ |
| ac97->build_ops = &patch_wolfson_wm9711_ops; |
| |
| ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_MIC | |
| AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD; |
| |
| return 0; |
| } |
| |
| static const char* wm9713_mic_mixer[] = {"Stereo", "Mic 1", "Mic 2", "Mute"}; |
| static const char* wm9713_rec_mux[] = {"Stereo", "Left", "Right", "Mute"}; |
| static const char* wm9713_rec_src[] = |
| {"Mic 1", "Mic 2", "Line", "Mono In", "Headphone Mix", "Master Mix", |
| "Mono Mix", "Zh"}; |
| static const char* wm9713_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; |
| static const char* wm9713_alc_select[] = {"None", "Left", "Right", "Stereo"}; |
| static const char* wm9713_mono_pga[] = {"Vmid", "Zh", "Mono Mix", "Inv 1"}; |
| static const char* wm9713_spk_pga[] = |
| {"Vmid", "Zh", "Headphone Mix", "Master Mix", "Inv", "NC", "NC", "NC"}; |
| static const char* wm9713_hp_pga[] = {"Vmid", "Zh", "Headphone Mix", "NC"}; |
| static const char* wm9713_out3_pga[] = {"Vmid", "Zh", "Inv 1", "NC"}; |
| static const char* wm9713_out4_pga[] = {"Vmid", "Zh", "Inv 2", "NC"}; |
| static const char* wm9713_dac_inv[] = |
| {"Off", "Mono Mix", "Master Mix", "Headphone Mix L", "Headphone Mix R", |
| "Headphone Mix Mono", "NC", "Vmid"}; |
| static const char* wm9713_base[] = {"Linear Control", "Adaptive Boost"}; |
| static const char* wm9713_ng_type[] = {"Constant Gain", "Mute"}; |
| |
| static const struct ac97_enum wm9713_enum[] = { |
| AC97_ENUM_SINGLE(AC97_LINE, 3, 4, wm9713_mic_mixer), |
| AC97_ENUM_SINGLE(AC97_VIDEO, 14, 4, wm9713_rec_mux), |
| AC97_ENUM_SINGLE(AC97_VIDEO, 9, 4, wm9713_rec_mux), |
| AC97_ENUM_DOUBLE(AC97_VIDEO, 3, 0, 8, wm9713_rec_src), |
| AC97_ENUM_DOUBLE(AC97_CD, 14, 6, 2, wm9713_rec_gain), |
| AC97_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9713_alc_select), |
| AC97_ENUM_SINGLE(AC97_REC_GAIN, 14, 4, wm9713_mono_pga), |
| AC97_ENUM_DOUBLE(AC97_REC_GAIN, 11, 8, 8, wm9713_spk_pga), |
| AC97_ENUM_DOUBLE(AC97_REC_GAIN, 6, 4, 4, wm9713_hp_pga), |
| AC97_ENUM_SINGLE(AC97_REC_GAIN, 2, 4, wm9713_out3_pga), |
| AC97_ENUM_SINGLE(AC97_REC_GAIN, 0, 4, wm9713_out4_pga), |
| AC97_ENUM_DOUBLE(AC97_REC_GAIN_MIC, 13, 10, 8, wm9713_dac_inv), |
| AC97_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, wm9713_base), |
| AC97_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9713_ng_type), |
| }; |
| |
| static const struct snd_kcontrol_new wm13_snd_ac97_controls[] = { |
| AC97_DOUBLE("Line In Volume", AC97_PC_BEEP, 8, 0, 31, 1), |
| AC97_SINGLE("Line In to Headphone Switch", AC97_PC_BEEP, 15, 1, 1), |
| AC97_SINGLE("Line In to Master Switch", AC97_PC_BEEP, 14, 1, 1), |
| AC97_SINGLE("Line In to Mono Switch", AC97_PC_BEEP, 13, 1, 1), |
| |
| AC97_DOUBLE("PCM Playback Volume", AC97_PHONE, 8, 0, 31, 1), |
| AC97_SINGLE("PCM Playback to Headphone Switch", AC97_PHONE, 15, 1, 1), |
| AC97_SINGLE("PCM Playback to Master Switch", AC97_PHONE, 14, 1, 1), |
| AC97_SINGLE("PCM Playback to Mono Switch", AC97_PHONE, 13, 1, 1), |
| |
| AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1), |
| AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), |
| AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1), |
| AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1), |
| AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0), |
| AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]), |
| AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1), |
| |
| AC97_SINGLE("Capture Switch", AC97_CD, 15, 1, 1), |
| AC97_ENUM("Capture Volume Steps", wm9713_enum[4]), |
| AC97_DOUBLE("Capture Volume", AC97_CD, 8, 0, 15, 0), |
| AC97_SINGLE("Capture ZC Switch", AC97_CD, 7, 1, 0), |
| |
| AC97_ENUM("Capture to Headphone Mux", wm9713_enum[1]), |
| AC97_SINGLE("Capture to Headphone Volume", AC97_VIDEO, 11, 7, 1), |
| AC97_ENUM("Capture to Mono Mux", wm9713_enum[2]), |
| AC97_SINGLE("Capture to Mono Boost (+20dB) Switch", AC97_VIDEO, 8, 1, 0), |
| AC97_SINGLE("Capture ADC Boost (+20dB) Switch", AC97_VIDEO, 6, 1, 0), |
| AC97_ENUM("Capture Select", wm9713_enum[3]), |
| |
| AC97_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), |
| AC97_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), |
| AC97_SINGLE("ALC Decay Time ", AC97_CODEC_CLASS_REV, 4, 15, 0), |
| AC97_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), |
| AC97_ENUM("ALC Function", wm9713_enum[5]), |
| AC97_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 0), |
| AC97_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 0), |
| AC97_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), |
| AC97_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), |
| AC97_ENUM("ALC NG Type", wm9713_enum[13]), |
| AC97_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 0), |
| |
| AC97_DOUBLE("Master ZC Switch", AC97_MASTER, 14, 6, 1, 0), |
| AC97_DOUBLE("Headphone ZC Switch", AC97_HEADPHONE, 14, 6, 1, 0), |
| AC97_DOUBLE("Out3/4 ZC Switch", AC97_MASTER_MONO, 14, 6, 1, 0), |
| AC97_SINGLE("Master Right Switch", AC97_MASTER, 7, 1, 1), |
| AC97_SINGLE("Headphone Right Switch", AC97_HEADPHONE, 7, 1, 1), |
| AC97_SINGLE("Out3/4 Right Switch", AC97_MASTER_MONO, 7, 1, 1), |
| |
| AC97_SINGLE("Mono In to Headphone Switch", AC97_MASTER_TONE, 15, 1, 1), |
| AC97_SINGLE("Mono In to Master Switch", AC97_MASTER_TONE, 14, 1, 1), |
| AC97_SINGLE("Mono In Volume", AC97_MASTER_TONE, 8, 31, 1), |
| AC97_SINGLE("Mono Switch", AC97_MASTER_TONE, 7, 1, 1), |
| AC97_SINGLE("Mono ZC Switch", AC97_MASTER_TONE, 6, 1, 0), |
| AC97_SINGLE("Mono Volume", AC97_MASTER_TONE, 0, 31, 1), |
| |
| AC97_SINGLE("Beep to Headphone Switch", AC97_AUX, 15, 1, 1), |
| AC97_SINGLE("Beep to Headphone Volume", AC97_AUX, 12, 7, 1), |
| AC97_SINGLE("Beep to Master Switch", AC97_AUX, 11, 1, 1), |
| AC97_SINGLE("Beep to Master Volume", AC97_AUX, 8, 7, 1), |
| AC97_SINGLE("Beep to Mono Switch", AC97_AUX, 7, 1, 1), |
| AC97_SINGLE("Beep to Mono Volume", AC97_AUX, 4, 7, 1), |
| |
| AC97_SINGLE("Voice to Headphone Switch", AC97_PCM, 15, 1, 1), |
| AC97_SINGLE("Voice to Headphone Volume", AC97_PCM, 12, 7, 1), |
| AC97_SINGLE("Voice to Master Switch", AC97_PCM, 11, 1, 1), |
| AC97_SINGLE("Voice to Master Volume", AC97_PCM, 8, 7, 1), |
| AC97_SINGLE("Voice to Mono Switch", AC97_PCM, 7, 1, 1), |
| AC97_SINGLE("Voice to Mono Volume", AC97_PCM, 4, 7, 1), |
| |
| AC97_SINGLE("Aux to Headphone Switch", AC97_REC_SEL, 15, 1, 1), |
| AC97_SINGLE("Aux to Headphone Volume", AC97_REC_SEL, 12, 7, 1), |
| AC97_SINGLE("Aux to Master Switch", AC97_REC_SEL, 11, 1, 1), |
| AC97_SINGLE("Aux to Master Volume", AC97_REC_SEL, 8, 7, 1), |
| AC97_SINGLE("Aux to Mono Switch", AC97_REC_SEL, 7, 1, 1), |
| AC97_SINGLE("Aux to Mono Volume", AC97_REC_SEL, 4, 7, 1), |
| |
| AC97_ENUM("Mono Input Mux", wm9713_enum[6]), |
| AC97_ENUM("Master Input Mux", wm9713_enum[7]), |
| AC97_ENUM("Headphone Input Mux", wm9713_enum[8]), |
| AC97_ENUM("Out 3 Input Mux", wm9713_enum[9]), |
| AC97_ENUM("Out 4 Input Mux", wm9713_enum[10]), |
| |
| AC97_ENUM("Bass Control", wm9713_enum[12]), |
| AC97_SINGLE("Bass Cut-off Switch", AC97_GENERAL_PURPOSE, 12, 1, 1), |
| AC97_SINGLE("Tone Cut-off Switch", AC97_GENERAL_PURPOSE, 4, 1, 1), |
| AC97_SINGLE("Playback Attenuate (-6dB) Switch", AC97_GENERAL_PURPOSE, 6, 1, 0), |
| AC97_SINGLE("Bass Volume", AC97_GENERAL_PURPOSE, 8, 15, 1), |
| AC97_SINGLE("Tone Volume", AC97_GENERAL_PURPOSE, 0, 15, 1), |
| }; |
| |
| static const struct snd_kcontrol_new wm13_snd_ac97_controls_3d[] = { |
| AC97_ENUM("Inv Input Mux", wm9713_enum[11]), |
| AC97_SINGLE("3D Upper Cut-off Switch", AC97_REC_GAIN_MIC, 5, 1, 0), |
| AC97_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0), |
| AC97_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1), |
| }; |
| |
| static int patch_wolfson_wm9713_3d (struct snd_ac97 * ac97) |
| { |
| int err, i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_3d); i++) { |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_3d[i], ac97))) < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| static int patch_wolfson_wm9713_specific(struct snd_ac97 * ac97) |
| { |
| int err, i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls); i++) { |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls[i], ac97))) < 0) |
| return err; |
| } |
| snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_PHONE, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_MIC, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_LINE, 0x00da); |
| snd_ac97_write_cache(ac97, AC97_CD, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_VIDEO, 0xd612); |
| snd_ac97_write_cache(ac97, AC97_REC_GAIN, 0x1ba0); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static void patch_wolfson_wm9713_suspend (struct snd_ac97 * ac97) |
| { |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_MID, 0xfeff); |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0xffff); |
| } |
| |
| static void patch_wolfson_wm9713_resume (struct snd_ac97 * ac97) |
| { |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_MID, 0xda00); |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0x3810); |
| snd_ac97_write_cache(ac97, AC97_POWERDOWN, 0x0); |
| } |
| #endif |
| |
| static const struct snd_ac97_build_ops patch_wolfson_wm9713_ops = { |
| .build_specific = patch_wolfson_wm9713_specific, |
| .build_3d = patch_wolfson_wm9713_3d, |
| #ifdef CONFIG_PM |
| .suspend = patch_wolfson_wm9713_suspend, |
| .resume = patch_wolfson_wm9713_resume |
| #endif |
| }; |
| |
| static int patch_wolfson13(struct snd_ac97 * ac97) |
| { |
| /* WM9713, WM9714 */ |
| ac97->build_ops = &patch_wolfson_wm9713_ops; |
| |
| ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_PHONE | |
| AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD | AC97_HAS_NO_TONE | |
| AC97_HAS_NO_STD_PCM; |
| ac97->scaps &= ~AC97_SCAP_MODEM; |
| |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_MID, 0xda00); |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0x3810); |
| snd_ac97_write_cache(ac97, AC97_POWERDOWN, 0x0); |
| |
| return 0; |
| } |
| |
| /* |
| * Tritech codec |
| */ |
| static int patch_tritech_tr28028(struct snd_ac97 * ac97) |
| { |
| snd_ac97_write_cache(ac97, 0x26, 0x0300); |
| snd_ac97_write_cache(ac97, 0x26, 0x0000); |
| snd_ac97_write_cache(ac97, AC97_SURROUND_MASTER, 0x0000); |
| snd_ac97_write_cache(ac97, AC97_SPDIF, 0x0000); |
| return 0; |
| } |
| |
| /* |
| * Sigmatel STAC97xx codecs |
| */ |
| static int patch_sigmatel_stac9700_3d(struct snd_ac97 * ac97) |
| { |
| struct snd_kcontrol *kctl; |
| int err; |
| |
| if ((err = snd_ctl_add(ac97->bus->card, kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97))) < 0) |
| return err; |
| strcpy(kctl->id.name, "3D Control Sigmatel - Depth"); |
| kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 2, 3, 0); |
| snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000); |
| return 0; |
| } |
| |
| static int patch_sigmatel_stac9708_3d(struct snd_ac97 * ac97) |
| { |
| struct snd_kcontrol *kctl; |
| int err; |
| |
| if ((err = snd_ctl_add(ac97->bus->card, kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97))) < 0) |
| return err; |
| strcpy(kctl->id.name, "3D Control Sigmatel - Depth"); |
| kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 0, 3, 0); |
| if ((err = snd_ctl_add(ac97->bus->card, kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97))) < 0) |
| return err; |
| strcpy(kctl->id.name, "3D Control Sigmatel - Rear Depth"); |
| kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 2, 3, 0); |
| snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000); |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_sigmatel_4speaker = |
| AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", |
| AC97_SIGMATEL_DAC2INVERT, 2, 1, 0); |
| |
| /* "Sigmatel " removed due to excessive name length: */ |
| static const struct snd_kcontrol_new snd_ac97_sigmatel_phaseinvert = |
| AC97_SINGLE("Surround Phase Inversion Playback Switch", |
| AC97_SIGMATEL_DAC2INVERT, 3, 1, 0); |
| |
| static const struct snd_kcontrol_new snd_ac97_sigmatel_controls[] = { |
| AC97_SINGLE("Sigmatel DAC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 1, 1, 0), |
| AC97_SINGLE("Sigmatel ADC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 0, 1, 0) |
| }; |
| |
| static int patch_sigmatel_stac97xx_specific(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_ANALOG, snd_ac97_read(ac97, AC97_SIGMATEL_ANALOG) & ~0x0003); |
| if (snd_ac97_try_bit(ac97, AC97_SIGMATEL_ANALOG, 1)) |
| if ((err = patch_build_controls(ac97, &snd_ac97_sigmatel_controls[0], 1)) < 0) |
| return err; |
| if (snd_ac97_try_bit(ac97, AC97_SIGMATEL_ANALOG, 0)) |
| if ((err = patch_build_controls(ac97, &snd_ac97_sigmatel_controls[1], 1)) < 0) |
| return err; |
| if (snd_ac97_try_bit(ac97, AC97_SIGMATEL_DAC2INVERT, 2)) |
| if ((err = patch_build_controls(ac97, &snd_ac97_sigmatel_4speaker, 1)) < 0) |
| return err; |
| if (snd_ac97_try_bit(ac97, AC97_SIGMATEL_DAC2INVERT, 3)) |
| if ((err = patch_build_controls(ac97, &snd_ac97_sigmatel_phaseinvert, 1)) < 0) |
| return err; |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_sigmatel_stac9700_ops = { |
| .build_3d = patch_sigmatel_stac9700_3d, |
| .build_specific = patch_sigmatel_stac97xx_specific |
| }; |
| |
| static int patch_sigmatel_stac9700(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_sigmatel_stac9700_ops; |
| return 0; |
| } |
| |
| static int snd_ac97_stac9708_put_bias(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int err; |
| |
| mutex_lock(&ac97->page_mutex); |
| snd_ac97_write(ac97, AC97_SIGMATEL_BIAS1, 0xabba); |
| err = snd_ac97_update_bits(ac97, AC97_SIGMATEL_BIAS2, 0x0010, |
| (ucontrol->value.integer.value[0] & 1) << 4); |
| snd_ac97_write(ac97, AC97_SIGMATEL_BIAS1, 0); |
| mutex_unlock(&ac97->page_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_stac9708_bias_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Sigmatel Output Bias Switch", |
| .info = snd_ac97_info_volsw, |
| .get = snd_ac97_get_volsw, |
| .put = snd_ac97_stac9708_put_bias, |
| .private_value = AC97_SINGLE_VALUE(AC97_SIGMATEL_BIAS2, 4, 1, 0), |
| }; |
| |
| static int patch_sigmatel_stac9708_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| /* the register bit is writable, but the function is not implemented: */ |
| snd_ac97_remove_ctl(ac97, "PCM Out Path & Mute", NULL); |
| |
| snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Sigmatel Surround Playback"); |
| if ((err = patch_build_controls(ac97, &snd_ac97_stac9708_bias_control, 1)) < 0) |
| return err; |
| return patch_sigmatel_stac97xx_specific(ac97); |
| } |
| |
| static const struct snd_ac97_build_ops patch_sigmatel_stac9708_ops = { |
| .build_3d = patch_sigmatel_stac9708_3d, |
| .build_specific = patch_sigmatel_stac9708_specific |
| }; |
| |
| static int patch_sigmatel_stac9708(struct snd_ac97 * ac97) |
| { |
| unsigned int codec72, codec6c; |
| |
| ac97->build_ops = &patch_sigmatel_stac9708_ops; |
| ac97->caps |= 0x10; /* HP (sigmatel surround) support */ |
| |
| codec72 = snd_ac97_read(ac97, AC97_SIGMATEL_BIAS2) & 0x8000; |
| codec6c = snd_ac97_read(ac97, AC97_SIGMATEL_ANALOG); |
| |
| if ((codec72==0) && (codec6c==0)) { |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC2, 0x1000); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS2, 0x0007); |
| } else if ((codec72==0x8000) && (codec6c==0)) { |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC2, 0x1001); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_DAC2INVERT, 0x0008); |
| } else if ((codec72==0x8000) && (codec6c==0x0080)) { |
| /* nothing */ |
| } |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_MULTICHN, 0x0000); |
| return 0; |
| } |
| |
| static int patch_sigmatel_stac9721(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_sigmatel_stac9700_ops; |
| if (snd_ac97_read(ac97, AC97_SIGMATEL_ANALOG) == 0) { |
| // patch for SigmaTel |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC2, 0x4000); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS2, 0x0002); |
| } |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_MULTICHN, 0x0000); |
| return 0; |
| } |
| |
| static int patch_sigmatel_stac9744(struct snd_ac97 * ac97) |
| { |
| // patch for SigmaTel |
| ac97->build_ops = &patch_sigmatel_stac9700_ops; |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC2, 0x0000); /* is this correct? --jk */ |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS2, 0x0002); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_MULTICHN, 0x0000); |
| return 0; |
| } |
| |
| static int patch_sigmatel_stac9756(struct snd_ac97 * ac97) |
| { |
| // patch for SigmaTel |
| ac97->build_ops = &patch_sigmatel_stac9700_ops; |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_CIC2, 0x0000); /* is this correct? --jk */ |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS1, 0xabba); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_BIAS2, 0x0002); |
| snd_ac97_write_cache(ac97, AC97_SIGMATEL_MULTICHN, 0x0000); |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_output_jack_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[5] = { "Input/Disabled", "Front Output", |
| "Rear Output", "Center/LFE Output", "Mixer Output" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 5; |
| if (uinfo->value.enumerated.item > 4) |
| uinfo->value.enumerated.item = 4; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_output_jack_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int shift = kcontrol->private_value; |
| unsigned short val; |
| |
| val = ac97->regs[AC97_SIGMATEL_OUTSEL] >> shift; |
| if (!(val & 4)) |
| ucontrol->value.enumerated.item[0] = 0; |
| else |
| ucontrol->value.enumerated.item[0] = 1 + (val & 3); |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_output_jack_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int shift = kcontrol->private_value; |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 4) |
| return -EINVAL; |
| if (ucontrol->value.enumerated.item[0] == 0) |
| val = 0; |
| else |
| val = 4 | (ucontrol->value.enumerated.item[0] - 1); |
| return ac97_update_bits_page(ac97, AC97_SIGMATEL_OUTSEL, |
| 7 << shift, val << shift, 0); |
| } |
| |
| static int snd_ac97_stac9758_input_jack_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[7] = { "Mic2 Jack", "Mic1 Jack", "Line In Jack", |
| "Front Jack", "Rear Jack", "Center/LFE Jack", "Mute" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 7; |
| if (uinfo->value.enumerated.item > 6) |
| uinfo->value.enumerated.item = 6; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_input_jack_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int shift = kcontrol->private_value; |
| unsigned short val; |
| |
| val = ac97->regs[AC97_SIGMATEL_INSEL]; |
| ucontrol->value.enumerated.item[0] = (val >> shift) & 7; |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_input_jack_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int shift = kcontrol->private_value; |
| |
| return ac97_update_bits_page(ac97, AC97_SIGMATEL_INSEL, 7 << shift, |
| ucontrol->value.enumerated.item[0] << shift, 0); |
| } |
| |
| static int snd_ac97_stac9758_phonesel_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[3] = { "None", "Front Jack", "Rear Jack" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 3; |
| if (uinfo->value.enumerated.item > 2) |
| uinfo->value.enumerated.item = 2; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_phonesel_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| ucontrol->value.enumerated.item[0] = ac97->regs[AC97_SIGMATEL_IOMISC] & 3; |
| return 0; |
| } |
| |
| static int snd_ac97_stac9758_phonesel_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| return ac97_update_bits_page(ac97, AC97_SIGMATEL_IOMISC, 3, |
| ucontrol->value.enumerated.item[0], 0); |
| } |
| |
| #define STAC9758_OUTPUT_JACK(xname, shift) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_ac97_stac9758_output_jack_info, \ |
| .get = snd_ac97_stac9758_output_jack_get, \ |
| .put = snd_ac97_stac9758_output_jack_put, \ |
| .private_value = shift } |
| #define STAC9758_INPUT_JACK(xname, shift) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_ac97_stac9758_input_jack_info, \ |
| .get = snd_ac97_stac9758_input_jack_get, \ |
| .put = snd_ac97_stac9758_input_jack_put, \ |
| .private_value = shift } |
| static const struct snd_kcontrol_new snd_ac97_sigmatel_stac9758_controls[] = { |
| STAC9758_OUTPUT_JACK("Mic1 Jack", 1), |
| STAC9758_OUTPUT_JACK("LineIn Jack", 4), |
| STAC9758_OUTPUT_JACK("Front Jack", 7), |
| STAC9758_OUTPUT_JACK("Rear Jack", 10), |
| STAC9758_OUTPUT_JACK("Center/LFE Jack", 13), |
| STAC9758_INPUT_JACK("Mic Input Source", 0), |
| STAC9758_INPUT_JACK("Line Input Source", 8), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Headphone Amp", |
| .info = snd_ac97_stac9758_phonesel_info, |
| .get = snd_ac97_stac9758_phonesel_get, |
| .put = snd_ac97_stac9758_phonesel_put |
| }, |
| AC97_SINGLE("Exchange Center/LFE", AC97_SIGMATEL_IOMISC, 4, 1, 0), |
| AC97_SINGLE("Headphone +3dB Boost", AC97_SIGMATEL_IOMISC, 8, 1, 0) |
| }; |
| |
| static int patch_sigmatel_stac9758_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| err = patch_sigmatel_stac97xx_specific(ac97); |
| if (err < 0) |
| return err; |
| err = patch_build_controls(ac97, snd_ac97_sigmatel_stac9758_controls, |
| ARRAY_SIZE(snd_ac97_sigmatel_stac9758_controls)); |
| if (err < 0) |
| return err; |
| /* DAC-A direct */ |
| snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Front Playback"); |
| /* DAC-A to Mix = PCM */ |
| /* DAC-B direct = Surround */ |
| /* DAC-B to Mix */ |
| snd_ac97_rename_vol_ctl(ac97, "Video Playback", "Surround Mix Playback"); |
| /* DAC-C direct = Center/LFE */ |
| |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_sigmatel_stac9758_ops = { |
| .build_3d = patch_sigmatel_stac9700_3d, |
| .build_specific = patch_sigmatel_stac9758_specific |
| }; |
| |
| static int patch_sigmatel_stac9758(struct snd_ac97 * ac97) |
| { |
| static unsigned short regs[4] = { |
| AC97_SIGMATEL_OUTSEL, |
| AC97_SIGMATEL_IOMISC, |
| AC97_SIGMATEL_INSEL, |
| AC97_SIGMATEL_VARIOUS |
| }; |
| static unsigned short def_regs[4] = { |
| /* OUTSEL */ 0xd794, /* CL:CL, SR:SR, LO:MX, LI:DS, MI:DS */ |
| /* IOMISC */ 0x2001, |
| /* INSEL */ 0x0201, /* LI:LI, MI:M1 */ |
| /* VARIOUS */ 0x0040 |
| }; |
| static unsigned short m675_regs[4] = { |
| /* OUTSEL */ 0xfc70, /* CL:MX, SR:MX, LO:DS, LI:MX, MI:DS */ |
| /* IOMISC */ 0x2102, /* HP amp on */ |
| /* INSEL */ 0x0203, /* LI:LI, MI:FR */ |
| /* VARIOUS */ 0x0041 /* stereo mic */ |
| }; |
| unsigned short *pregs = def_regs; |
| int i; |
| |
| /* Gateway M675 notebook */ |
| if (ac97->pci && |
| ac97->subsystem_vendor == 0x107b && |
| ac97->subsystem_device == 0x0601) |
| pregs = m675_regs; |
| |
| // patch for SigmaTel |
| ac97->build_ops = &patch_sigmatel_stac9758_ops; |
| /* FIXME: assume only page 0 for writing cache */ |
| snd_ac97_update_bits(ac97, AC97_INT_PAGING, AC97_PAGE_MASK, AC97_PAGE_VENDOR); |
| for (i = 0; i < 4; i++) |
| snd_ac97_write_cache(ac97, regs[i], pregs[i]); |
| |
| ac97->flags |= AC97_STEREO_MUTES; |
| return 0; |
| } |
| |
| /* |
| * Cirrus Logic CS42xx codecs |
| */ |
| static const struct snd_kcontrol_new snd_ac97_cirrus_controls_spdif[2] = { |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), AC97_CSR_SPDIF, 15, 1, 0), |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "AC97-SPSA", AC97_CSR_ACMODE, 0, 3, 0) |
| }; |
| |
| static int patch_cirrus_build_spdif(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| /* con mask, pro mask, default */ |
| if ((err = patch_build_controls(ac97, &snd_ac97_controls_spdif[0], 3)) < 0) |
| return err; |
| /* switch, spsa */ |
| if ((err = patch_build_controls(ac97, &snd_ac97_cirrus_controls_spdif[0], 1)) < 0) |
| return err; |
| switch (ac97->id & AC97_ID_CS_MASK) { |
| case AC97_ID_CS4205: |
| if ((err = patch_build_controls(ac97, &snd_ac97_cirrus_controls_spdif[1], 1)) < 0) |
| return err; |
| break; |
| } |
| /* set default PCM S/PDIF params */ |
| /* consumer,PCM audio,no copyright,no preemphasis,PCM coder,original,48000Hz */ |
| snd_ac97_write_cache(ac97, AC97_CSR_SPDIF, 0x0a20); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_cirrus_ops = { |
| .build_spdif = patch_cirrus_build_spdif |
| }; |
| |
| static int patch_cirrus_spdif(struct snd_ac97 * ac97) |
| { |
| /* Basically, the cs4201/cs4205/cs4297a has non-standard sp/dif registers. |
| WHY CAN'T ANYONE FOLLOW THE BLOODY SPEC? *sigh* |
| - sp/dif EA ID is not set, but sp/dif is always present. |
| - enable/disable is spdif register bit 15. |
| - sp/dif control register is 0x68. differs from AC97: |
| - valid is bit 14 (vs 15) |
| - no DRS |
| - only 44.1/48k [00 = 48, 01=44,1] (AC97 is 00=44.1, 10=48) |
| - sp/dif ssource select is in 0x5e bits 0,1. |
| */ |
| |
| ac97->build_ops = &patch_cirrus_ops; |
| ac97->flags |= AC97_CS_SPDIF; |
| ac97->rates[AC97_RATES_SPDIF] &= ~SNDRV_PCM_RATE_32000; |
| ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */ |
| snd_ac97_write_cache(ac97, AC97_CSR_ACMODE, 0x0080); |
| return 0; |
| } |
| |
| static int patch_cirrus_cs4299(struct snd_ac97 * ac97) |
| { |
| /* force the detection of PC Beep */ |
| ac97->flags |= AC97_HAS_PC_BEEP; |
| |
| return patch_cirrus_spdif(ac97); |
| } |
| |
| /* |
| * Conexant codecs |
| */ |
| static const struct snd_kcontrol_new snd_ac97_conexant_controls_spdif[1] = { |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), AC97_CXR_AUDIO_MISC, 3, 1, 0), |
| }; |
| |
| static int patch_conexant_build_spdif(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| /* con mask, pro mask, default */ |
| if ((err = patch_build_controls(ac97, &snd_ac97_controls_spdif[0], 3)) < 0) |
| return err; |
| /* switch */ |
| if ((err = patch_build_controls(ac97, &snd_ac97_conexant_controls_spdif[0], 1)) < 0) |
| return err; |
| /* set default PCM S/PDIF params */ |
| /* consumer,PCM audio,no copyright,no preemphasis,PCM coder,original,48000Hz */ |
| snd_ac97_write_cache(ac97, AC97_CXR_AUDIO_MISC, |
| snd_ac97_read(ac97, AC97_CXR_AUDIO_MISC) & ~(AC97_CXR_SPDIFEN|AC97_CXR_COPYRGT|AC97_CXR_SPDIF_MASK)); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_conexant_ops = { |
| .build_spdif = patch_conexant_build_spdif |
| }; |
| |
| static int patch_conexant(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_conexant_ops; |
| ac97->flags |= AC97_CX_SPDIF; |
| ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */ |
| ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */ |
| return 0; |
| } |
| |
| static int patch_cx20551(struct snd_ac97 *ac97) |
| { |
| snd_ac97_update_bits(ac97, 0x5c, 0x01, 0x01); |
| return 0; |
| } |
| |
| /* |
| * Analog Device AD18xx, AD19xx codecs |
| */ |
| #ifdef CONFIG_PM |
| static void ad18xx_resume(struct snd_ac97 *ac97) |
| { |
| static unsigned short setup_regs[] = { |
| AC97_AD_MISC, AC97_AD_SERIAL_CFG, AC97_AD_JACK_SPDIF, |
| }; |
| int i, codec; |
| |
| for (i = 0; i < (int)ARRAY_SIZE(setup_regs); i++) { |
| unsigned short reg = setup_regs[i]; |
| if (test_bit(reg, ac97->reg_accessed)) { |
| snd_ac97_write(ac97, reg, ac97->regs[reg]); |
| snd_ac97_read(ac97, reg); |
| } |
| } |
| |
| if (! (ac97->flags & AC97_AD_MULTI)) |
| /* normal restore */ |
| snd_ac97_restore_status(ac97); |
| else { |
| /* restore the AD18xx codec configurations */ |
| for (codec = 0; codec < 3; codec++) { |
| if (! ac97->spec.ad18xx.id[codec]) |
| continue; |
| /* select single codec */ |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, |
| ac97->spec.ad18xx.unchained[codec] | ac97->spec.ad18xx.chained[codec]); |
| ac97->bus->ops->write(ac97, AC97_AD_CODEC_CFG, ac97->spec.ad18xx.codec_cfg[codec]); |
| } |
| /* select all codecs */ |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, 0x7000); |
| |
| /* restore status */ |
| for (i = 2; i < 0x7c ; i += 2) { |
| if (i == AC97_POWERDOWN || i == AC97_EXTENDED_ID) |
| continue; |
| if (test_bit(i, ac97->reg_accessed)) { |
| /* handle multi codecs for AD18xx */ |
| if (i == AC97_PCM) { |
| for (codec = 0; codec < 3; codec++) { |
| if (! ac97->spec.ad18xx.id[codec]) |
| continue; |
| /* select single codec */ |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, |
| ac97->spec.ad18xx.unchained[codec] | ac97->spec.ad18xx.chained[codec]); |
| /* update PCM bits */ |
| ac97->bus->ops->write(ac97, AC97_PCM, ac97->spec.ad18xx.pcmreg[codec]); |
| } |
| /* select all codecs */ |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, 0x7000); |
| continue; |
| } else if (i == AC97_AD_TEST || |
| i == AC97_AD_CODEC_CFG || |
| i == AC97_AD_SERIAL_CFG) |
| continue; /* ignore */ |
| } |
| snd_ac97_write(ac97, i, ac97->regs[i]); |
| snd_ac97_read(ac97, i); |
| } |
| } |
| |
| snd_ac97_restore_iec958(ac97); |
| } |
| |
| static void ad1888_resume(struct snd_ac97 *ac97) |
| { |
| ad18xx_resume(ac97); |
| snd_ac97_write_cache(ac97, AC97_CODEC_CLASS_REV, 0x8080); |
| } |
| |
| #endif |
| |
| static const struct snd_ac97_res_table ad1819_restbl[] = { |
| { AC97_PHONE, 0x9f1f }, |
| { AC97_MIC, 0x9f1f }, |
| { AC97_LINE, 0x9f1f }, |
| { AC97_CD, 0x9f1f }, |
| { AC97_VIDEO, 0x9f1f }, |
| { AC97_AUX, 0x9f1f }, |
| { AC97_PCM, 0x9f1f }, |
| { } /* terminator */ |
| }; |
| |
| static int patch_ad1819(struct snd_ac97 * ac97) |
| { |
| unsigned short scfg; |
| |
| // patch for Analog Devices |
| scfg = snd_ac97_read(ac97, AC97_AD_SERIAL_CFG); |
| snd_ac97_write_cache(ac97, AC97_AD_SERIAL_CFG, scfg | 0x7000); /* select all codecs */ |
| ac97->res_table = ad1819_restbl; |
| return 0; |
| } |
| |
| static unsigned short patch_ad1881_unchained(struct snd_ac97 * ac97, int idx, unsigned short mask) |
| { |
| unsigned short val; |
| |
| // test for unchained codec |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, mask); |
| snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, 0x0000); /* ID0C, ID1C, SDIE = off */ |
| val = snd_ac97_read(ac97, AC97_VENDOR_ID2); |
| if ((val & 0xff40) != 0x5340) |
| return 0; |
| ac97->spec.ad18xx.unchained[idx] = mask; |
| ac97->spec.ad18xx.id[idx] = val; |
| ac97->spec.ad18xx.codec_cfg[idx] = 0x0000; |
| return mask; |
| } |
| |
| static int patch_ad1881_chained1(struct snd_ac97 * ac97, int idx, unsigned short codec_bits) |
| { |
| static int cfg_bits[3] = { 1<<12, 1<<14, 1<<13 }; |
| unsigned short val; |
| |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, cfg_bits[idx]); |
| snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, 0x0004); // SDIE |
| val = snd_ac97_read(ac97, AC97_VENDOR_ID2); |
| if ((val & 0xff40) != 0x5340) |
| return 0; |
| if (codec_bits) |
| snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, codec_bits); |
| ac97->spec.ad18xx.chained[idx] = cfg_bits[idx]; |
| ac97->spec.ad18xx.id[idx] = val; |
| ac97->spec.ad18xx.codec_cfg[idx] = codec_bits ? codec_bits : 0x0004; |
| return 1; |
| } |
| |
| static void patch_ad1881_chained(struct snd_ac97 * ac97, int unchained_idx, int cidx1, int cidx2) |
| { |
| // already detected? |
| if (ac97->spec.ad18xx.unchained[cidx1] || ac97->spec.ad18xx.chained[cidx1]) |
| cidx1 = -1; |
| if (ac97->spec.ad18xx.unchained[cidx2] || ac97->spec.ad18xx.chained[cidx2]) |
| cidx2 = -1; |
| if (cidx1 < 0 && cidx2 < 0) |
| return; |
| // test for chained codecs |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, |
| ac97->spec.ad18xx.unchained[unchained_idx]); |
| snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, 0x0002); // ID1C |
| ac97->spec.ad18xx.codec_cfg[unchained_idx] = 0x0002; |
| if (cidx1 >= 0) { |
| if (cidx2 < 0) |
| patch_ad1881_chained1(ac97, cidx1, 0); |
| else if (patch_ad1881_chained1(ac97, cidx1, 0x0006)) // SDIE | ID1C |
| patch_ad1881_chained1(ac97, cidx2, 0); |
| else if (patch_ad1881_chained1(ac97, cidx2, 0x0006)) // SDIE | ID1C |
| patch_ad1881_chained1(ac97, cidx1, 0); |
| } else if (cidx2 >= 0) { |
| patch_ad1881_chained1(ac97, cidx2, 0); |
| } |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1881_build_ops = { |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume |
| #endif |
| }; |
| |
| static int patch_ad1881(struct snd_ac97 * ac97) |
| { |
| static const char cfg_idxs[3][2] = { |
| {2, 1}, |
| {0, 2}, |
| {0, 1} |
| }; |
| |
| // patch for Analog Devices |
| unsigned short codecs[3]; |
| unsigned short val; |
| int idx, num; |
| |
| val = snd_ac97_read(ac97, AC97_AD_SERIAL_CFG); |
| snd_ac97_write_cache(ac97, AC97_AD_SERIAL_CFG, val); |
| codecs[0] = patch_ad1881_unchained(ac97, 0, (1<<12)); |
| codecs[1] = patch_ad1881_unchained(ac97, 1, (1<<14)); |
| codecs[2] = patch_ad1881_unchained(ac97, 2, (1<<13)); |
| |
| if (! (codecs[0] || codecs[1] || codecs[2])) |
| goto __end; |
| |
| for (idx = 0; idx < 3; idx++) |
| if (ac97->spec.ad18xx.unchained[idx]) |
| patch_ad1881_chained(ac97, idx, cfg_idxs[idx][0], cfg_idxs[idx][1]); |
| |
| if (ac97->spec.ad18xx.id[1]) { |
| ac97->flags |= AC97_AD_MULTI; |
| ac97->scaps |= AC97_SCAP_SURROUND_DAC; |
| } |
| if (ac97->spec.ad18xx.id[2]) { |
| ac97->flags |= AC97_AD_MULTI; |
| ac97->scaps |= AC97_SCAP_CENTER_LFE_DAC; |
| } |
| |
| __end: |
| /* select all codecs */ |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x7000, 0x7000); |
| /* check if only one codec is present */ |
| for (idx = num = 0; idx < 3; idx++) |
| if (ac97->spec.ad18xx.id[idx]) |
| num++; |
| if (num == 1) { |
| /* ok, deselect all ID bits */ |
| snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, 0x0000); |
| ac97->spec.ad18xx.codec_cfg[0] = |
| ac97->spec.ad18xx.codec_cfg[1] = |
| ac97->spec.ad18xx.codec_cfg[2] = 0x0000; |
| } |
| /* required for AD1886/AD1885 combination */ |
| ac97->ext_id = snd_ac97_read(ac97, AC97_EXTENDED_ID); |
| if (ac97->spec.ad18xx.id[0]) { |
| ac97->id &= 0xffff0000; |
| ac97->id |= ac97->spec.ad18xx.id[0]; |
| } |
| ac97->build_ops = &patch_ad1881_build_ops; |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_ad1885[] = { |
| AC97_SINGLE("Digital Mono Direct", AC97_AD_MISC, 11, 1, 0), |
| /* AC97_SINGLE("Digital Audio Mode", AC97_AD_MISC, 12, 1, 0), */ /* seems problematic */ |
| AC97_SINGLE("Low Power Mixer", AC97_AD_MISC, 14, 1, 0), |
| AC97_SINGLE("Zero Fill DAC", AC97_AD_MISC, 15, 1, 0), |
| AC97_SINGLE("Headphone Jack Sense", AC97_AD_JACK_SPDIF, 9, 1, 1), /* inverted */ |
| AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 8, 1, 1), /* inverted */ |
| }; |
| |
| static const DECLARE_TLV_DB_SCALE(db_scale_6bit_6db_max, -8850, 150, 0); |
| |
| static int patch_ad1885_specific(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, snd_ac97_controls_ad1885, ARRAY_SIZE(snd_ac97_controls_ad1885))) < 0) |
| return err; |
| reset_tlv(ac97, "Headphone Playback Volume", |
| db_scale_6bit_6db_max); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1885_build_ops = { |
| .build_specific = &patch_ad1885_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume |
| #endif |
| }; |
| |
| static int patch_ad1885(struct snd_ac97 * ac97) |
| { |
| patch_ad1881(ac97); |
| /* This is required to deal with the Intel D815EEAL2 */ |
| /* i.e. Line out is actually headphone out from codec */ |
| |
| /* set default */ |
| snd_ac97_write_cache(ac97, AC97_AD_MISC, 0x0404); |
| |
| ac97->build_ops = &patch_ad1885_build_ops; |
| return 0; |
| } |
| |
| static int patch_ad1886_specific(struct snd_ac97 * ac97) |
| { |
| reset_tlv(ac97, "Headphone Playback Volume", |
| db_scale_6bit_6db_max); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1886_build_ops = { |
| .build_specific = &patch_ad1886_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume |
| #endif |
| }; |
| |
| static int patch_ad1886(struct snd_ac97 * ac97) |
| { |
| patch_ad1881(ac97); |
| /* Presario700 workaround */ |
| /* for Jack Sense/SPDIF Register misetting causing */ |
| snd_ac97_write_cache(ac97, AC97_AD_JACK_SPDIF, 0x0010); |
| ac97->build_ops = &patch_ad1886_build_ops; |
| return 0; |
| } |
| |
| /* MISC bits (AD1888/AD1980/AD1985 register 0x76) */ |
| #define AC97_AD198X_MBC 0x0003 /* mic boost */ |
| #define AC97_AD198X_MBC_20 0x0000 /* +20dB */ |
| #define AC97_AD198X_MBC_10 0x0001 /* +10dB */ |
| #define AC97_AD198X_MBC_30 0x0002 /* +30dB */ |
| #define AC97_AD198X_VREFD 0x0004 /* VREF high-Z */ |
| #define AC97_AD198X_VREFH 0x0008 /* 0=2.25V, 1=3.7V */ |
| #define AC97_AD198X_VREF_0 0x000c /* 0V (AD1985 only) */ |
| #define AC97_AD198X_VREF_MASK (AC97_AD198X_VREFH | AC97_AD198X_VREFD) |
| #define AC97_AD198X_VREF_SHIFT 2 |
| #define AC97_AD198X_SRU 0x0010 /* sample rate unlock */ |
| #define AC97_AD198X_LOSEL 0x0020 /* LINE_OUT amplifiers input select */ |
| #define AC97_AD198X_2MIC 0x0040 /* 2-channel mic select */ |
| #define AC97_AD198X_SPRD 0x0080 /* SPREAD enable */ |
| #define AC97_AD198X_DMIX0 0x0100 /* downmix mode: */ |
| /* 0 = 6-to-4, 1 = 6-to-2 downmix */ |
| #define AC97_AD198X_DMIX1 0x0200 /* downmix mode: 1 = enabled */ |
| #define AC97_AD198X_HPSEL 0x0400 /* headphone amplifier input select */ |
| #define AC97_AD198X_CLDIS 0x0800 /* center/lfe disable */ |
| #define AC97_AD198X_LODIS 0x1000 /* LINE_OUT disable */ |
| #define AC97_AD198X_MSPLT 0x2000 /* mute split */ |
| #define AC97_AD198X_AC97NC 0x4000 /* AC97 no compatible mode */ |
| #define AC97_AD198X_DACZ 0x8000 /* DAC zero-fill mode */ |
| |
| /* MISC 1 bits (AD1986 register 0x76) */ |
| #define AC97_AD1986_MBC 0x0003 /* mic boost */ |
| #define AC97_AD1986_MBC_20 0x0000 /* +20dB */ |
| #define AC97_AD1986_MBC_10 0x0001 /* +10dB */ |
| #define AC97_AD1986_MBC_30 0x0002 /* +30dB */ |
| #define AC97_AD1986_LISEL0 0x0004 /* LINE_IN select bit 0 */ |
| #define AC97_AD1986_LISEL1 0x0008 /* LINE_IN select bit 1 */ |
| #define AC97_AD1986_LISEL_MASK (AC97_AD1986_LISEL1 | AC97_AD1986_LISEL0) |
| #define AC97_AD1986_LISEL_LI 0x0000 /* LINE_IN pins as LINE_IN source */ |
| #define AC97_AD1986_LISEL_SURR 0x0004 /* SURROUND pins as LINE_IN source */ |
| #define AC97_AD1986_LISEL_MIC 0x0008 /* MIC_1/2 pins as LINE_IN source */ |
| #define AC97_AD1986_SRU 0x0010 /* sample rate unlock */ |
| #define AC97_AD1986_SOSEL 0x0020 /* SURROUND_OUT amplifiers input sel */ |
| #define AC97_AD1986_2MIC 0x0040 /* 2-channel mic select */ |
| #define AC97_AD1986_SPRD 0x0080 /* SPREAD enable */ |
| #define AC97_AD1986_DMIX0 0x0100 /* downmix mode: */ |
| /* 0 = 6-to-4, 1 = 6-to-2 downmix */ |
| #define AC97_AD1986_DMIX1 0x0200 /* downmix mode: 1 = enabled */ |
| #define AC97_AD1986_CLDIS 0x0800 /* center/lfe disable */ |
| #define AC97_AD1986_SODIS 0x1000 /* SURROUND_OUT disable */ |
| #define AC97_AD1986_MSPLT 0x2000 /* mute split (read only 1) */ |
| #define AC97_AD1986_AC97NC 0x4000 /* AC97 no compatible mode (r/o 1) */ |
| #define AC97_AD1986_DACZ 0x8000 /* DAC zero-fill mode */ |
| |
| /* MISC 2 bits (AD1986 register 0x70) */ |
| #define AC97_AD_MISC2 0x70 /* Misc Control Bits 2 (AD1986) */ |
| |
| #define AC97_AD1986_CVREF0 0x0004 /* C/LFE VREF_OUT 2.25V */ |
| #define AC97_AD1986_CVREF1 0x0008 /* C/LFE VREF_OUT 0V */ |
| #define AC97_AD1986_CVREF2 0x0010 /* C/LFE VREF_OUT 3.7V */ |
| #define AC97_AD1986_CVREF_MASK \ |
| (AC97_AD1986_CVREF2 | AC97_AD1986_CVREF1 | AC97_AD1986_CVREF0) |
| #define AC97_AD1986_JSMAP 0x0020 /* Jack Sense Mapping 1 = alternate */ |
| #define AC97_AD1986_MMDIS 0x0080 /* Mono Mute Disable */ |
| #define AC97_AD1986_MVREF0 0x0400 /* MIC VREF_OUT 2.25V */ |
| #define AC97_AD1986_MVREF1 0x0800 /* MIC VREF_OUT 0V */ |
| #define AC97_AD1986_MVREF2 0x1000 /* MIC VREF_OUT 3.7V */ |
| #define AC97_AD1986_MVREF_MASK \ |
| (AC97_AD1986_MVREF2 | AC97_AD1986_MVREF1 | AC97_AD1986_MVREF0) |
| |
| /* MISC 3 bits (AD1986 register 0x7a) */ |
| #define AC97_AD_MISC3 0x7a /* Misc Control Bits 3 (AD1986) */ |
| |
| #define AC97_AD1986_MMIX 0x0004 /* Mic Mix, left/right */ |
| #define AC97_AD1986_GPO 0x0008 /* General Purpose Out */ |
| #define AC97_AD1986_LOHPEN 0x0010 /* LINE_OUT headphone drive */ |
| #define AC97_AD1986_LVREF0 0x0100 /* LINE_OUT VREF_OUT 2.25V */ |
| #define AC97_AD1986_LVREF1 0x0200 /* LINE_OUT VREF_OUT 0V */ |
| #define AC97_AD1986_LVREF2 0x0400 /* LINE_OUT VREF_OUT 3.7V */ |
| #define AC97_AD1986_LVREF_MASK \ |
| (AC97_AD1986_LVREF2 | AC97_AD1986_LVREF1 | AC97_AD1986_LVREF0) |
| #define AC97_AD1986_JSINVA 0x0800 /* Jack Sense Invert SENSE_A */ |
| #define AC97_AD1986_LOSEL 0x1000 /* LINE_OUT amplifiers input select */ |
| #define AC97_AD1986_HPSEL0 0x2000 /* Headphone amplifiers */ |
| /* input select Surround DACs */ |
| #define AC97_AD1986_HPSEL1 0x4000 /* Headphone amplifiers input */ |
| /* select C/LFE DACs */ |
| #define AC97_AD1986_JSINVB 0x8000 /* Jack Sense Invert SENSE_B */ |
| |
| /* Serial Config bits (AD1986 register 0x74) (incomplete) */ |
| #define AC97_AD1986_OMS0 0x0100 /* Optional Mic Selector bit 0 */ |
| #define AC97_AD1986_OMS1 0x0200 /* Optional Mic Selector bit 1 */ |
| #define AC97_AD1986_OMS2 0x0400 /* Optional Mic Selector bit 2 */ |
| #define AC97_AD1986_OMS_MASK \ |
| (AC97_AD1986_OMS2 | AC97_AD1986_OMS1 | AC97_AD1986_OMS0) |
| #define AC97_AD1986_OMS_M 0x0000 /* MIC_1/2 pins are MIC sources */ |
| #define AC97_AD1986_OMS_L 0x0100 /* LINE_IN pins are MIC sources */ |
| #define AC97_AD1986_OMS_C 0x0200 /* Center/LFE pins are MCI sources */ |
| #define AC97_AD1986_OMS_MC 0x0400 /* Mix of MIC and C/LFE pins */ |
| /* are MIC sources */ |
| #define AC97_AD1986_OMS_ML 0x0500 /* MIX of MIC and LINE_IN pins */ |
| /* are MIC sources */ |
| #define AC97_AD1986_OMS_LC 0x0600 /* MIX of LINE_IN and C/LFE pins */ |
| /* are MIC sources */ |
| #define AC97_AD1986_OMS_MLC 0x0700 /* MIX of MIC, LINE_IN, C/LFE pins */ |
| /* are MIC sources */ |
| |
| |
| static int snd_ac97_ad198x_spdif_source_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[2] = { "AC-Link", "A/D Converter" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 2; |
| if (uinfo->value.enumerated.item > 1) |
| uinfo->value.enumerated.item = 1; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_ad198x_spdif_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_AD_SERIAL_CFG]; |
| ucontrol->value.enumerated.item[0] = (val >> 2) & 1; |
| return 0; |
| } |
| |
| static int snd_ac97_ad198x_spdif_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 1) |
| return -EINVAL; |
| val = ucontrol->value.enumerated.item[0] << 2; |
| return snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 0x0004, val); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ad198x_spdif_source = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source", |
| .info = snd_ac97_ad198x_spdif_source_info, |
| .get = snd_ac97_ad198x_spdif_source_get, |
| .put = snd_ac97_ad198x_spdif_source_put, |
| }; |
| |
| static int patch_ad198x_post_spdif(struct snd_ac97 * ac97) |
| { |
| return patch_build_controls(ac97, &snd_ac97_ad198x_spdif_source, 1); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ad1981x_jack_sense[] = { |
| AC97_SINGLE("Headphone Jack Sense", AC97_AD_JACK_SPDIF, 11, 1, 0), |
| AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 12, 1, 0), |
| }; |
| |
| /* black list to avoid HP/Line jack-sense controls |
| * (SS vendor << 16 | device) |
| */ |
| static unsigned int ad1981_jacks_blacklist[] = { |
| 0x10140523, /* Thinkpad R40 */ |
| 0x10140534, /* Thinkpad X31 */ |
| 0x10140537, /* Thinkpad T41p */ |
| 0x1014053e, /* Thinkpad R40e */ |
| 0x10140554, /* Thinkpad T42p/R50p */ |
| 0x10140567, /* Thinkpad T43p 2668-G7U */ |
| 0x10140581, /* Thinkpad X41-2527 */ |
| 0x10280160, /* Dell Dimension 2400 */ |
| 0x104380b0, /* Asus A7V8X-MX */ |
| 0x11790241, /* Toshiba Satellite A-15 S127 */ |
| 0x1179ff10, /* Toshiba P500 */ |
| 0x144dc01a, /* Samsung NP-X20C004/SEG */ |
| 0 /* end */ |
| }; |
| |
| static int check_list(struct snd_ac97 *ac97, const unsigned int *list) |
| { |
| u32 subid = ((u32)ac97->subsystem_vendor << 16) | ac97->subsystem_device; |
| for (; *list; list++) |
| if (*list == subid) |
| return 1; |
| return 0; |
| } |
| |
| static int patch_ad1981a_specific(struct snd_ac97 * ac97) |
| { |
| if (check_list(ac97, ad1981_jacks_blacklist)) |
| return 0; |
| return patch_build_controls(ac97, snd_ac97_ad1981x_jack_sense, |
| ARRAY_SIZE(snd_ac97_ad1981x_jack_sense)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1981a_build_ops = { |
| .build_post_spdif = patch_ad198x_post_spdif, |
| .build_specific = patch_ad1981a_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume |
| #endif |
| }; |
| |
| /* white list to enable HP jack-sense bits |
| * (SS vendor << 16 | device) |
| */ |
| static unsigned int ad1981_jacks_whitelist[] = { |
| 0x0e11005a, /* HP nc4000/4010 */ |
| 0x103c0890, /* HP nc6000 */ |
| 0x103c0938, /* HP nc4220 */ |
| 0x103c099c, /* HP nx6110 */ |
| 0x103c0944, /* HP nc6220 */ |
| 0x103c0934, /* HP nc8220 */ |
| 0x103c006d, /* HP nx9105 */ |
| 0x103c300d, /* HP Compaq dc5100 SFF(PT003AW) */ |
| 0x17340088, /* FSC Scenic-W */ |
| 0 /* end */ |
| }; |
| |
| static void check_ad1981_hp_jack_sense(struct snd_ac97 *ac97) |
| { |
| if (check_list(ac97, ad1981_jacks_whitelist)) |
| /* enable headphone jack sense */ |
| snd_ac97_update_bits(ac97, AC97_AD_JACK_SPDIF, 1<<11, 1<<11); |
| } |
| |
| static int patch_ad1981a(struct snd_ac97 *ac97) |
| { |
| patch_ad1881(ac97); |
| ac97->build_ops = &patch_ad1981a_build_ops; |
| snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD198X_MSPLT, AC97_AD198X_MSPLT); |
| ac97->flags |= AC97_STEREO_MUTES; |
| check_ad1981_hp_jack_sense(ac97); |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ad198x_2cmic = |
| AC97_SINGLE("Stereo Mic", AC97_AD_MISC, 6, 1, 0); |
| |
| static int patch_ad1981b_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, &snd_ac97_ad198x_2cmic, 1)) < 0) |
| return err; |
| if (check_list(ac97, ad1981_jacks_blacklist)) |
| return 0; |
| return patch_build_controls(ac97, snd_ac97_ad1981x_jack_sense, |
| ARRAY_SIZE(snd_ac97_ad1981x_jack_sense)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1981b_build_ops = { |
| .build_post_spdif = patch_ad198x_post_spdif, |
| .build_specific = patch_ad1981b_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume |
| #endif |
| }; |
| |
| static int patch_ad1981b(struct snd_ac97 *ac97) |
| { |
| patch_ad1881(ac97); |
| ac97->build_ops = &patch_ad1981b_build_ops; |
| snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD198X_MSPLT, AC97_AD198X_MSPLT); |
| ac97->flags |= AC97_STEREO_MUTES; |
| check_ad1981_hp_jack_sense(ac97); |
| return 0; |
| } |
| |
| #define snd_ac97_ad1888_lohpsel_info snd_ctl_boolean_mono_info |
| |
| static int snd_ac97_ad1888_lohpsel_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_AD_MISC]; |
| ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL); |
| if (ac97->spec.ad18xx.lo_as_master) |
| ucontrol->value.integer.value[0] = |
| !ucontrol->value.integer.value[0]; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1888_lohpsel_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = !ucontrol->value.integer.value[0]; |
| if (ac97->spec.ad18xx.lo_as_master) |
| val = !val; |
| val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0; |
| return snd_ac97_update_bits(ac97, AC97_AD_MISC, |
| AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val); |
| } |
| |
| static int snd_ac97_ad1888_downmix_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[3] = {"Off", "6 -> 4", "6 -> 2"}; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 3; |
| if (uinfo->value.enumerated.item > 2) |
| uinfo->value.enumerated.item = 2; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_ad1888_downmix_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_AD_MISC]; |
| if (!(val & AC97_AD198X_DMIX1)) |
| ucontrol->value.enumerated.item[0] = 0; |
| else |
| ucontrol->value.enumerated.item[0] = 1 + ((val >> 8) & 1); |
| return 0; |
| } |
| |
| static int snd_ac97_ad1888_downmix_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 2) |
| return -EINVAL; |
| if (ucontrol->value.enumerated.item[0] == 0) |
| val = 0; |
| else |
| val = AC97_AD198X_DMIX1 | |
| ((ucontrol->value.enumerated.item[0] - 1) << 8); |
| return snd_ac97_update_bits(ac97, AC97_AD_MISC, |
| AC97_AD198X_DMIX0 | AC97_AD198X_DMIX1, val); |
| } |
| |
| static void ad1888_update_jacks(struct snd_ac97 *ac97) |
| { |
| unsigned short val = 0; |
| /* clear LODIS if shared jack is to be used for Surround out */ |
| if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97)) |
| val |= (1 << 12); |
| /* clear CLDIS if shared jack is to be used for C/LFE out */ |
| if (is_shared_micin(ac97)) |
| val |= (1 << 11); |
| /* shared Line-In */ |
| snd_ac97_update_bits(ac97, AC97_AD_MISC, (1 << 11) | (1 << 12), val); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ad1888_controls[] = { |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Exchange Front/Surround", |
| .info = snd_ac97_ad1888_lohpsel_info, |
| .get = snd_ac97_ad1888_lohpsel_get, |
| .put = snd_ac97_ad1888_lohpsel_put |
| }, |
| AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1), |
| AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, |
| AC97_AD_HPFD_SHIFT, 1, 1), |
| AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Downmix", |
| .info = snd_ac97_ad1888_downmix_info, |
| .get = snd_ac97_ad1888_downmix_get, |
| .put = snd_ac97_ad1888_downmix_put |
| }, |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| |
| AC97_SINGLE("Headphone Jack Sense", AC97_AD_JACK_SPDIF, 10, 1, 0), |
| AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 12, 1, 0), |
| }; |
| |
| static int patch_ad1888_specific(struct snd_ac97 *ac97) |
| { |
| if (!ac97->spec.ad18xx.lo_as_master) { |
| /* rename 0x04 as "Master" and 0x02 as "Master Surround" */ |
| snd_ac97_rename_vol_ctl(ac97, "Master Playback", |
| "Master Surround Playback"); |
| snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", |
| "Master Playback"); |
| } |
| return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1888_build_ops = { |
| .build_post_spdif = patch_ad198x_post_spdif, |
| .build_specific = patch_ad1888_specific, |
| #ifdef CONFIG_PM |
| .resume = ad1888_resume, |
| #endif |
| .update_jacks = ad1888_update_jacks, |
| }; |
| |
| static int patch_ad1888(struct snd_ac97 * ac97) |
| { |
| unsigned short misc; |
| |
| patch_ad1881(ac97); |
| ac97->build_ops = &patch_ad1888_build_ops; |
| |
| /* |
| * LO can be used as a real line-out on some devices, |
| * and we need to revert the front/surround mixer switches |
| */ |
| if (ac97->subsystem_vendor == 0x1043 && |
| ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */ |
| ac97->spec.ad18xx.lo_as_master = 1; |
| |
| misc = snd_ac97_read(ac97, AC97_AD_MISC); |
| /* AD-compatible mode */ |
| /* Stereo mutes enabled */ |
| misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC; |
| if (!ac97->spec.ad18xx.lo_as_master) |
| /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */ |
| /* it seems that most vendors connect line-out connector to |
| * headphone out of AC'97 |
| */ |
| misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL; |
| |
| snd_ac97_write_cache(ac97, AC97_AD_MISC, misc); |
| ac97->flags |= AC97_STEREO_MUTES; |
| return 0; |
| } |
| |
| static int patch_ad1980_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| if ((err = patch_ad1888_specific(ac97)) < 0) |
| return err; |
| return patch_build_controls(ac97, &snd_ac97_ad198x_2cmic, 1); |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1980_build_ops = { |
| .build_post_spdif = patch_ad198x_post_spdif, |
| .build_specific = patch_ad1980_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume, |
| #endif |
| .update_jacks = ad1888_update_jacks, |
| }; |
| |
| static int patch_ad1980(struct snd_ac97 * ac97) |
| { |
| patch_ad1888(ac97); |
| ac97->build_ops = &patch_ad1980_build_ops; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1985_vrefout_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[4] = {"High-Z", "3.7 V", "2.25 V", "0 V"}; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 4; |
| if (uinfo->value.enumerated.item > 3) |
| uinfo->value.enumerated.item = 3; |
| strcpy(uinfo->value.enumerated.name, |
| texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_ad1985_vrefout_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| static const int reg2ctrl[4] = {2, 0, 1, 3}; |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| val = (ac97->regs[AC97_AD_MISC] & AC97_AD198X_VREF_MASK) |
| >> AC97_AD198X_VREF_SHIFT; |
| ucontrol->value.enumerated.item[0] = reg2ctrl[val]; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1985_vrefout_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| static const int ctrl2reg[4] = {1, 2, 0, 3}; |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| if (ucontrol->value.enumerated.item[0] > 3) |
| return -EINVAL; |
| val = ctrl2reg[ucontrol->value.enumerated.item[0]] |
| << AC97_AD198X_VREF_SHIFT; |
| return snd_ac97_update_bits(ac97, AC97_AD_MISC, |
| AC97_AD198X_VREF_MASK, val); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ad1985_controls[] = { |
| AC97_SINGLE("Exchange Center/LFE", AC97_AD_SERIAL_CFG, 3, 1, 0), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Exchange Front/Surround", |
| .info = snd_ac97_ad1888_lohpsel_info, |
| .get = snd_ac97_ad1888_lohpsel_get, |
| .put = snd_ac97_ad1888_lohpsel_put |
| }, |
| AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1), |
| AC97_SINGLE("Spread Front to Surround and Center/LFE", |
| AC97_AD_MISC, 7, 1, 0), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Downmix", |
| .info = snd_ac97_ad1888_downmix_info, |
| .get = snd_ac97_ad1888_downmix_get, |
| .put = snd_ac97_ad1888_downmix_put |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "V_REFOUT", |
| .info = snd_ac97_ad1985_vrefout_info, |
| .get = snd_ac97_ad1985_vrefout_get, |
| .put = snd_ac97_ad1985_vrefout_put |
| }, |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| |
| AC97_SINGLE("Headphone Jack Sense", AC97_AD_JACK_SPDIF, 10, 1, 0), |
| AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 12, 1, 0), |
| }; |
| |
| static void ad1985_update_jacks(struct snd_ac97 *ac97) |
| { |
| ad1888_update_jacks(ac97); |
| /* clear OMS if shared jack is to be used for C/LFE out */ |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 1 << 9, |
| is_shared_micin(ac97) ? 1 << 9 : 0); |
| } |
| |
| static int patch_ad1985_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| /* rename 0x04 as "Master" and 0x02 as "Master Surround" */ |
| snd_ac97_rename_vol_ctl(ac97, "Master Playback", |
| "Master Surround Playback"); |
| snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback"); |
| |
| if ((err = patch_build_controls(ac97, &snd_ac97_ad198x_2cmic, 1)) < 0) |
| return err; |
| |
| return patch_build_controls(ac97, snd_ac97_ad1985_controls, |
| ARRAY_SIZE(snd_ac97_ad1985_controls)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1985_build_ops = { |
| .build_post_spdif = patch_ad198x_post_spdif, |
| .build_specific = patch_ad1985_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume, |
| #endif |
| .update_jacks = ad1985_update_jacks, |
| }; |
| |
| static int patch_ad1985(struct snd_ac97 * ac97) |
| { |
| unsigned short misc; |
| |
| patch_ad1881(ac97); |
| ac97->build_ops = &patch_ad1985_build_ops; |
| misc = snd_ac97_read(ac97, AC97_AD_MISC); |
| /* switch front/surround line-out/hp-out */ |
| /* AD-compatible mode */ |
| /* Stereo mutes enabled */ |
| snd_ac97_write_cache(ac97, AC97_AD_MISC, misc | |
| AC97_AD198X_LOSEL | |
| AC97_AD198X_HPSEL | |
| AC97_AD198X_MSPLT | |
| AC97_AD198X_AC97NC); |
| ac97->flags |= AC97_STEREO_MUTES; |
| |
| /* update current jack configuration */ |
| ad1985_update_jacks(ac97); |
| |
| /* on AD1985 rev. 3, AC'97 revision bits are zero */ |
| ac97->ext_id = (ac97->ext_id & ~AC97_EI_REV_MASK) | AC97_EI_REV_23; |
| return 0; |
| } |
| |
| #define snd_ac97_ad1986_bool_info snd_ctl_boolean_mono_info |
| |
| static int snd_ac97_ad1986_lososel_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_AD_MISC3]; |
| ucontrol->value.integer.value[0] = (val & AC97_AD1986_LOSEL) != 0; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1986_lososel_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int ret0; |
| int ret1; |
| int sprd = (ac97->regs[AC97_AD_MISC] & AC97_AD1986_SPRD) != 0; |
| |
| ret0 = snd_ac97_update_bits(ac97, AC97_AD_MISC3, AC97_AD1986_LOSEL, |
| ucontrol->value.integer.value[0] != 0 |
| ? AC97_AD1986_LOSEL : 0); |
| if (ret0 < 0) |
| return ret0; |
| |
| /* SOSEL is set to values of "Spread" or "Exchange F/S" controls */ |
| ret1 = snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD1986_SOSEL, |
| (ucontrol->value.integer.value[0] != 0 |
| || sprd) |
| ? AC97_AD1986_SOSEL : 0); |
| if (ret1 < 0) |
| return ret1; |
| |
| return (ret0 > 0 || ret1 > 0) ? 1 : 0; |
| } |
| |
| static int snd_ac97_ad1986_spread_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_AD_MISC]; |
| ucontrol->value.integer.value[0] = (val & AC97_AD1986_SPRD) != 0; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1986_spread_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| int ret0; |
| int ret1; |
| int sprd = (ac97->regs[AC97_AD_MISC3] & AC97_AD1986_LOSEL) != 0; |
| |
| ret0 = snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD1986_SPRD, |
| ucontrol->value.integer.value[0] != 0 |
| ? AC97_AD1986_SPRD : 0); |
| if (ret0 < 0) |
| return ret0; |
| |
| /* SOSEL is set to values of "Spread" or "Exchange F/S" controls */ |
| ret1 = snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD1986_SOSEL, |
| (ucontrol->value.integer.value[0] != 0 |
| || sprd) |
| ? AC97_AD1986_SOSEL : 0); |
| if (ret1 < 0) |
| return ret1; |
| |
| return (ret0 > 0 || ret1 > 0) ? 1 : 0; |
| } |
| |
| static int snd_ac97_ad1986_miclisel_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| ucontrol->value.integer.value[0] = ac97->spec.ad18xx.swap_mic_linein; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1986_miclisel_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned char swap = ucontrol->value.integer.value[0] != 0; |
| |
| if (swap != ac97->spec.ad18xx.swap_mic_linein) { |
| ac97->spec.ad18xx.swap_mic_linein = swap; |
| if (ac97->build_ops->update_jacks) |
| ac97->build_ops->update_jacks(ac97); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int snd_ac97_ad1986_vrefout_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| /* Use MIC_1/2 V_REFOUT as the "get" value */ |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| unsigned short reg = ac97->regs[AC97_AD_MISC2]; |
| if ((reg & AC97_AD1986_MVREF0) != 0) |
| val = 2; |
| else if ((reg & AC97_AD1986_MVREF1) != 0) |
| val = 3; |
| else if ((reg & AC97_AD1986_MVREF2) != 0) |
| val = 1; |
| else |
| val = 0; |
| ucontrol->value.enumerated.item[0] = val; |
| return 0; |
| } |
| |
| static int snd_ac97_ad1986_vrefout_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short cval; |
| unsigned short lval; |
| unsigned short mval; |
| int cret; |
| int lret; |
| int mret; |
| |
| switch (ucontrol->value.enumerated.item[0]) |
| { |
| case 0: /* High-Z */ |
| cval = 0; |
| lval = 0; |
| mval = 0; |
| break; |
| case 1: /* 3.7 V */ |
| cval = AC97_AD1986_CVREF2; |
| lval = AC97_AD1986_LVREF2; |
| mval = AC97_AD1986_MVREF2; |
| break; |
| case 2: /* 2.25 V */ |
| cval = AC97_AD1986_CVREF0; |
| lval = AC97_AD1986_LVREF0; |
| mval = AC97_AD1986_MVREF0; |
| break; |
| case 3: /* 0 V */ |
| cval = AC97_AD1986_CVREF1; |
| lval = AC97_AD1986_LVREF1; |
| mval = AC97_AD1986_MVREF1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| cret = snd_ac97_update_bits(ac97, AC97_AD_MISC2, |
| AC97_AD1986_CVREF_MASK, cval); |
| if (cret < 0) |
| return cret; |
| lret = snd_ac97_update_bits(ac97, AC97_AD_MISC3, |
| AC97_AD1986_LVREF_MASK, lval); |
| if (lret < 0) |
| return lret; |
| mret = snd_ac97_update_bits(ac97, AC97_AD_MISC2, |
| AC97_AD1986_MVREF_MASK, mval); |
| if (mret < 0) |
| return mret; |
| |
| return (cret > 0 || lret > 0 || mret > 0) ? 1 : 0; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_ad1986_controls[] = { |
| AC97_SINGLE("Exchange Center/LFE", AC97_AD_SERIAL_CFG, 3, 1, 0), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Exchange Front/Surround", |
| .info = snd_ac97_ad1986_bool_info, |
| .get = snd_ac97_ad1986_lososel_get, |
| .put = snd_ac97_ad1986_lososel_put |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Exchange Mic/Line In", |
| .info = snd_ac97_ad1986_bool_info, |
| .get = snd_ac97_ad1986_miclisel_get, |
| .put = snd_ac97_ad1986_miclisel_put |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Spread Front to Surround and Center/LFE", |
| .info = snd_ac97_ad1986_bool_info, |
| .get = snd_ac97_ad1986_spread_get, |
| .put = snd_ac97_ad1986_spread_put |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Downmix", |
| .info = snd_ac97_ad1888_downmix_info, |
| .get = snd_ac97_ad1888_downmix_get, |
| .put = snd_ac97_ad1888_downmix_put |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "V_REFOUT", |
| .info = snd_ac97_ad1985_vrefout_info, |
| .get = snd_ac97_ad1986_vrefout_get, |
| .put = snd_ac97_ad1986_vrefout_put |
| }, |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| |
| AC97_SINGLE("Headphone Jack Sense", AC97_AD_JACK_SPDIF, 10, 1, 0), |
| AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 12, 1, 0) |
| }; |
| |
| static void ad1986_update_jacks(struct snd_ac97 *ac97) |
| { |
| unsigned short misc_val = 0; |
| unsigned short ser_val; |
| |
| /* disable SURROUND and CENTER/LFE if not surround mode */ |
| if (!is_surround_on(ac97)) |
| misc_val |= AC97_AD1986_SODIS; |
| if (!is_clfe_on(ac97)) |
| misc_val |= AC97_AD1986_CLDIS; |
| |
| /* select line input (default=LINE_IN, SURROUND or MIC_1/2) */ |
| if (is_shared_linein(ac97)) |
| misc_val |= AC97_AD1986_LISEL_SURR; |
| else if (ac97->spec.ad18xx.swap_mic_linein != 0) |
| misc_val |= AC97_AD1986_LISEL_MIC; |
| snd_ac97_update_bits(ac97, AC97_AD_MISC, |
| AC97_AD1986_SODIS | AC97_AD1986_CLDIS | |
| AC97_AD1986_LISEL_MASK, |
| misc_val); |
| |
| /* select microphone input (MIC_1/2, Center/LFE or LINE_IN) */ |
| if (is_shared_micin(ac97)) |
| ser_val = AC97_AD1986_OMS_C; |
| else if (ac97->spec.ad18xx.swap_mic_linein != 0) |
| ser_val = AC97_AD1986_OMS_L; |
| else |
| ser_val = AC97_AD1986_OMS_M; |
| snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, |
| AC97_AD1986_OMS_MASK, |
| ser_val); |
| } |
| |
| static int patch_ad1986_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, &snd_ac97_ad198x_2cmic, 1)) < 0) |
| return err; |
| |
| return patch_build_controls(ac97, snd_ac97_ad1986_controls, |
| ARRAY_SIZE(snd_ac97_ad1985_controls)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_ad1986_build_ops = { |
| .build_post_spdif = patch_ad198x_post_spdif, |
| .build_specific = patch_ad1986_specific, |
| #ifdef CONFIG_PM |
| .resume = ad18xx_resume, |
| #endif |
| .update_jacks = ad1986_update_jacks, |
| }; |
| |
| static int patch_ad1986(struct snd_ac97 * ac97) |
| { |
| patch_ad1881(ac97); |
| ac97->build_ops = &patch_ad1986_build_ops; |
| ac97->flags |= AC97_STEREO_MUTES; |
| |
| /* update current jack configuration */ |
| ad1986_update_jacks(ac97); |
| |
| return 0; |
| } |
| |
| /* |
| * realtek ALC203: use mono-out for pin 37 |
| */ |
| static int patch_alc203(struct snd_ac97 *ac97) |
| { |
| snd_ac97_update_bits(ac97, 0x7a, 0x400, 0x400); |
| return 0; |
| } |
| |
| /* |
| * realtek ALC65x/850 codecs |
| */ |
| static void alc650_update_jacks(struct snd_ac97 *ac97) |
| { |
| int shared; |
| |
| /* shared Line-In / Surround Out */ |
| shared = is_shared_surrout(ac97); |
| snd_ac97_update_bits(ac97, AC97_ALC650_MULTICH, 1 << 9, |
| shared ? (1 << 9) : 0); |
| /* update shared Mic In / Center/LFE Out */ |
| shared = is_shared_clfeout(ac97); |
| /* disable/enable vref */ |
| snd_ac97_update_bits(ac97, AC97_ALC650_CLOCK, 1 << 12, |
| shared ? (1 << 12) : 0); |
| /* turn on/off center-on-mic */ |
| snd_ac97_update_bits(ac97, AC97_ALC650_MULTICH, 1 << 10, |
| shared ? (1 << 10) : 0); |
| /* GPIO0 high for mic */ |
| snd_ac97_update_bits(ac97, AC97_ALC650_GPIO_STATUS, 0x100, |
| shared ? 0 : 0x100); |
| } |
| |
| static int alc650_swap_surround_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| struct snd_pcm_chmap *map = ac97->chmaps[SNDRV_PCM_STREAM_PLAYBACK]; |
| |
| if (map) { |
| if (ucontrol->value.integer.value[0]) |
| map->chmap = snd_pcm_std_chmaps; |
| else |
| map->chmap = snd_pcm_alt_chmaps; |
| } |
| return snd_ac97_put_volsw(kcontrol, ucontrol); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_alc650[] = { |
| AC97_SINGLE("Duplicate Front", AC97_ALC650_MULTICH, 0, 1, 0), |
| AC97_SINGLE("Surround Down Mix", AC97_ALC650_MULTICH, 1, 1, 0), |
| AC97_SINGLE("Center/LFE Down Mix", AC97_ALC650_MULTICH, 2, 1, 0), |
| AC97_SINGLE("Exchange Center/LFE", AC97_ALC650_MULTICH, 3, 1, 0), |
| /* 4: Analog Input To Surround */ |
| /* 5: Analog Input To Center/LFE */ |
| /* 6: Independent Master Volume Right */ |
| /* 7: Independent Master Volume Left */ |
| /* 8: reserved */ |
| /* 9: Line-In/Surround share */ |
| /* 10: Mic/CLFE share */ |
| /* 11-13: in IEC958 controls */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Swap Surround Slot", |
| .info = snd_ac97_info_volsw, |
| .get = snd_ac97_get_volsw, |
| .put = alc650_swap_surround_put, |
| .private_value = AC97_SINGLE_VALUE(AC97_ALC650_MULTICH, 14, 1, 0), |
| }, |
| #if 0 /* always set in patch_alc650 */ |
| AC97_SINGLE("IEC958 Input Clock Enable", AC97_ALC650_CLOCK, 0, 1, 0), |
| AC97_SINGLE("IEC958 Input Pin Enable", AC97_ALC650_CLOCK, 1, 1, 0), |
| AC97_SINGLE("Surround DAC Switch", AC97_ALC650_SURR_DAC_VOL, 15, 1, 1), |
| AC97_DOUBLE("Surround DAC Volume", AC97_ALC650_SURR_DAC_VOL, 8, 0, 31, 1), |
| AC97_SINGLE("Center/LFE DAC Switch", AC97_ALC650_LFE_DAC_VOL, 15, 1, 1), |
| AC97_DOUBLE("Center/LFE DAC Volume", AC97_ALC650_LFE_DAC_VOL, 8, 0, 31, 1), |
| #endif |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| }; |
| |
| static const struct snd_kcontrol_new snd_ac97_spdif_controls_alc650[] = { |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_ALC650_MULTICH, 11, 1, 0), |
| AC97_SINGLE("Analog to IEC958 Output", AC97_ALC650_MULTICH, 12, 1, 0), |
| /* disable this controls since it doesn't work as expected */ |
| /* AC97_SINGLE("IEC958 Input Monitor", AC97_ALC650_MULTICH, 13, 1, 0), */ |
| }; |
| |
| static const DECLARE_TLV_DB_SCALE(db_scale_5bit_3db_max, -4350, 150, 0); |
| |
| static int patch_alc650_specific(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, snd_ac97_controls_alc650, ARRAY_SIZE(snd_ac97_controls_alc650))) < 0) |
| return err; |
| if (ac97->ext_id & AC97_EI_SPDIF) { |
| if ((err = patch_build_controls(ac97, snd_ac97_spdif_controls_alc650, ARRAY_SIZE(snd_ac97_spdif_controls_alc650))) < 0) |
| return err; |
| } |
| if (ac97->id != AC97_ID_ALC650F) |
| reset_tlv(ac97, "Master Playback Volume", |
| db_scale_5bit_3db_max); |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_alc650_ops = { |
| .build_specific = patch_alc650_specific, |
| .update_jacks = alc650_update_jacks |
| }; |
| |
| static int patch_alc650(struct snd_ac97 * ac97) |
| { |
| unsigned short val; |
| |
| ac97->build_ops = &patch_alc650_ops; |
| |
| /* determine the revision */ |
| val = snd_ac97_read(ac97, AC97_ALC650_REVISION) & 0x3f; |
| if (val < 3) |
| ac97->id = 0x414c4720; /* Old version */ |
| else if (val < 0x10) |
| ac97->id = 0x414c4721; /* D version */ |
| else if (val < 0x20) |
| ac97->id = 0x414c4722; /* E version */ |
| else if (val < 0x30) |
| ac97->id = 0x414c4723; /* F version */ |
| |
| /* revision E or F */ |
| /* FIXME: what about revision D ? */ |
| ac97->spec.dev_flags = (ac97->id == 0x414c4722 || |
| ac97->id == 0x414c4723); |
| |
| /* enable AC97_ALC650_GPIO_SETUP, AC97_ALC650_CLOCK for R/W */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_GPIO_STATUS, |
| snd_ac97_read(ac97, AC97_ALC650_GPIO_STATUS) | 0x8000); |
| |
| /* Enable SPDIF-IN only on Rev.E and above */ |
| val = snd_ac97_read(ac97, AC97_ALC650_CLOCK); |
| /* SPDIF IN with pin 47 */ |
| if (ac97->spec.dev_flags && |
| /* ASUS A6KM requires EAPD */ |
| ! (ac97->subsystem_vendor == 0x1043 && |
| ac97->subsystem_device == 0x1103)) |
| val |= 0x03; /* enable */ |
| else |
| val &= ~0x03; /* disable */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_CLOCK, val); |
| |
| /* set default: slot 3,4,7,8,6,9 |
| spdif-in monitor off, analog-spdif off, spdif-in off |
| center on mic off, surround on line-in off |
| downmix off, duplicate front off |
| */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_MULTICH, 0); |
| |
| /* set GPIO0 for mic bias */ |
| /* GPIO0 pin output, no interrupt, high */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_GPIO_SETUP, |
| snd_ac97_read(ac97, AC97_ALC650_GPIO_SETUP) | 0x01); |
| snd_ac97_write_cache(ac97, AC97_ALC650_GPIO_STATUS, |
| (snd_ac97_read(ac97, AC97_ALC650_GPIO_STATUS) | 0x100) & ~0x10); |
| |
| /* full DAC volume */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_SURR_DAC_VOL, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_ALC650_LFE_DAC_VOL, 0x0808); |
| return 0; |
| } |
| |
| static void alc655_update_jacks(struct snd_ac97 *ac97) |
| { |
| int shared; |
| |
| /* shared Line-In / Surround Out */ |
| shared = is_shared_surrout(ac97); |
| ac97_update_bits_page(ac97, AC97_ALC650_MULTICH, 1 << 9, |
| shared ? (1 << 9) : 0, 0); |
| /* update shared Mic In / Center/LFE Out */ |
| shared = is_shared_clfeout(ac97); |
| /* misc control; vrefout disable */ |
| snd_ac97_update_bits(ac97, AC97_ALC650_CLOCK, 1 << 12, |
| shared ? (1 << 12) : 0); |
| ac97_update_bits_page(ac97, AC97_ALC650_MULTICH, 1 << 10, |
| shared ? (1 << 10) : 0, 0); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_alc655[] = { |
| AC97_PAGE_SINGLE("Duplicate Front", AC97_ALC650_MULTICH, 0, 1, 0, 0), |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| }; |
| |
| static int alc655_iec958_route_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts_655[3] = { "PCM", "Analog In", "IEC958 In" }; |
| static char *texts_658[4] = { "PCM", "Analog1 In", "Analog2 In", "IEC958 In" }; |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = ac97->spec.dev_flags ? 4 : 3; |
| if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) |
| uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1; |
| strcpy(uinfo->value.enumerated.name, |
| ac97->spec.dev_flags ? |
| texts_658[uinfo->value.enumerated.item] : |
| texts_655[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int alc655_iec958_route_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_ALC650_MULTICH]; |
| val = (val >> 12) & 3; |
| if (ac97->spec.dev_flags && val == 3) |
| val = 0; |
| ucontrol->value.enumerated.item[0] = val; |
| return 0; |
| } |
| |
| static int alc655_iec958_route_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| return ac97_update_bits_page(ac97, AC97_ALC650_MULTICH, 3 << 12, |
| (unsigned short)ucontrol->value.enumerated.item[0] << 12, |
| 0); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_spdif_controls_alc655[] = { |
| AC97_PAGE_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_ALC650_MULTICH, 11, 1, 0, 0), |
| /* disable this controls since it doesn't work as expected */ |
| /* AC97_PAGE_SINGLE("IEC958 Input Monitor", AC97_ALC650_MULTICH, 14, 1, 0, 0), */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source", |
| .info = alc655_iec958_route_info, |
| .get = alc655_iec958_route_get, |
| .put = alc655_iec958_route_put, |
| }, |
| }; |
| |
| static int patch_alc655_specific(struct snd_ac97 * ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, snd_ac97_controls_alc655, ARRAY_SIZE(snd_ac97_controls_alc655))) < 0) |
| return err; |
| if (ac97->ext_id & AC97_EI_SPDIF) { |
| if ((err = patch_build_controls(ac97, snd_ac97_spdif_controls_alc655, ARRAY_SIZE(snd_ac97_spdif_controls_alc655))) < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_alc655_ops = { |
| .build_specific = patch_alc655_specific, |
| .update_jacks = alc655_update_jacks |
| }; |
| |
| static int patch_alc655(struct snd_ac97 * ac97) |
| { |
| unsigned int val; |
| |
| if (ac97->id == AC97_ID_ALC658) { |
| ac97->spec.dev_flags = 1; /* ALC658 */ |
| if ((snd_ac97_read(ac97, AC97_ALC650_REVISION) & 0x3f) == 2) { |
| ac97->id = AC97_ID_ALC658D; |
| ac97->spec.dev_flags = 2; |
| } |
| } |
| |
| ac97->build_ops = &patch_alc655_ops; |
| |
| /* assume only page 0 for writing cache */ |
| snd_ac97_update_bits(ac97, AC97_INT_PAGING, AC97_PAGE_MASK, AC97_PAGE_VENDOR); |
| |
| /* adjust default values */ |
| val = snd_ac97_read(ac97, 0x7a); /* misc control */ |
| if (ac97->spec.dev_flags) /* ALC658 */ |
| val &= ~(1 << 1); /* Pin 47 is spdif input pin */ |
| else { /* ALC655 */ |
| if (ac97->subsystem_vendor == 0x1462 && |
| (ac97->subsystem_device == 0x0131 || /* MSI S270 laptop */ |
| ac97->subsystem_device == 0x0161 || /* LG K1 Express */ |
| ac97->subsystem_device == 0x0351 || /* MSI L725 laptop */ |
| ac97->subsystem_device == 0x0471 || /* MSI L720 laptop */ |
| ac97->subsystem_device == 0x0061)) /* MSI S250 laptop */ |
| val &= ~(1 << 1); /* Pin 47 is EAPD (for internal speaker) */ |
| else |
| val |= (1 << 1); /* Pin 47 is spdif input pin */ |
| /* this seems missing on some hardwares */ |
| ac97->ext_id |= AC97_EI_SPDIF; |
| } |
| val &= ~(1 << 12); /* vref enable */ |
| snd_ac97_write_cache(ac97, 0x7a, val); |
| /* set default: spdif-in enabled, |
| spdif-in monitor off, spdif-in PCM off |
| center on mic off, surround on line-in off |
| duplicate front off |
| */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_MULTICH, 1<<15); |
| |
| /* full DAC volume */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_SURR_DAC_VOL, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_ALC650_LFE_DAC_VOL, 0x0808); |
| |
| /* update undocumented bit... */ |
| if (ac97->id == AC97_ID_ALC658D) |
| snd_ac97_update_bits(ac97, 0x74, 0x0800, 0x0800); |
| |
| return 0; |
| } |
| |
| |
| #define AC97_ALC850_JACK_SELECT 0x76 |
| #define AC97_ALC850_MISC1 0x7a |
| #define AC97_ALC850_MULTICH 0x6a |
| |
| static void alc850_update_jacks(struct snd_ac97 *ac97) |
| { |
| int shared; |
| int aux_is_back_surround; |
| |
| /* shared Line-In / Surround Out */ |
| shared = is_shared_surrout(ac97); |
| /* SURR 1kOhm (bit4), Amp (bit5) */ |
| snd_ac97_update_bits(ac97, AC97_ALC850_MISC1, (1<<4)|(1<<5), |
| shared ? (1<<5) : (1<<4)); |
| /* LINE-IN = 0, SURROUND = 2 */ |
| snd_ac97_update_bits(ac97, AC97_ALC850_JACK_SELECT, 7 << 12, |
| shared ? (2<<12) : (0<<12)); |
| /* update shared Mic In / Center/LFE Out */ |
| shared = is_shared_clfeout(ac97); |
| /* Vref disable (bit12), 1kOhm (bit13) */ |
| snd_ac97_update_bits(ac97, AC97_ALC850_MISC1, (1<<12)|(1<<13), |
| shared ? (1<<12) : (1<<13)); |
| /* MIC-IN = 1, CENTER-LFE = 5 */ |
| snd_ac97_update_bits(ac97, AC97_ALC850_JACK_SELECT, 7 << 4, |
| shared ? (5<<4) : (1<<4)); |
| |
| aux_is_back_surround = alc850_is_aux_back_surround(ac97); |
| /* Aux is Back Surround */ |
| snd_ac97_update_bits(ac97, AC97_ALC850_MULTICH, 1 << 10, |
| aux_is_back_surround ? (1<<10) : (0<<10)); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_alc850[] = { |
| AC97_PAGE_SINGLE("Duplicate Front", AC97_ALC650_MULTICH, 0, 1, 0, 0), |
| AC97_SINGLE("Mic Front Input Switch", AC97_ALC850_JACK_SELECT, 15, 1, 1), |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_8CH_CTL, |
| }; |
| |
| static int patch_alc850_specific(struct snd_ac97 *ac97) |
| { |
| int err; |
| |
| if ((err = patch_build_controls(ac97, snd_ac97_controls_alc850, ARRAY_SIZE(snd_ac97_controls_alc850))) < 0) |
| return err; |
| if (ac97->ext_id & AC97_EI_SPDIF) { |
| if ((err = patch_build_controls(ac97, snd_ac97_spdif_controls_alc655, ARRAY_SIZE(snd_ac97_spdif_controls_alc655))) < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_alc850_ops = { |
| .build_specific = patch_alc850_specific, |
| .update_jacks = alc850_update_jacks |
| }; |
| |
| static int patch_alc850(struct snd_ac97 *ac97) |
| { |
| ac97->build_ops = &patch_alc850_ops; |
| |
| ac97->spec.dev_flags = 0; /* for IEC958 playback route - ALC655 compatible */ |
| ac97->flags |= AC97_HAS_8CH; |
| |
| /* assume only page 0 for writing cache */ |
| snd_ac97_update_bits(ac97, AC97_INT_PAGING, AC97_PAGE_MASK, AC97_PAGE_VENDOR); |
| |
| /* adjust default values */ |
| /* set default: spdif-in enabled, |
| spdif-in monitor off, spdif-in PCM off |
| center on mic off, surround on line-in off |
| duplicate front off |
| NB default bit 10=0 = Aux is Capture, not Back Surround |
| */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_MULTICH, 1<<15); |
| /* SURR_OUT: on, Surr 1kOhm: on, Surr Amp: off, Front 1kOhm: off |
| * Front Amp: on, Vref: enable, Center 1kOhm: on, Mix: on |
| */ |
| snd_ac97_write_cache(ac97, 0x7a, (1<<1)|(1<<4)|(0<<5)|(1<<6)| |
| (1<<7)|(0<<12)|(1<<13)|(0<<14)); |
| /* detection UIO2,3: all path floating, UIO3: MIC, Vref2: disable, |
| * UIO1: FRONT, Vref3: disable, UIO3: LINE, Front-Mic: mute |
| */ |
| snd_ac97_write_cache(ac97, 0x76, (0<<0)|(0<<2)|(1<<4)|(1<<7)|(2<<8)| |
| (1<<11)|(0<<12)|(1<<15)); |
| |
| /* full DAC volume */ |
| snd_ac97_write_cache(ac97, AC97_ALC650_SURR_DAC_VOL, 0x0808); |
| snd_ac97_write_cache(ac97, AC97_ALC650_LFE_DAC_VOL, 0x0808); |
| return 0; |
| } |
| |
| static int patch_aztech_azf3328_specific(struct snd_ac97 *ac97) |
| { |
| struct snd_kcontrol *kctl_3d_center = |
| snd_ac97_find_mixer_ctl(ac97, "3D Control - Center"); |
| struct snd_kcontrol *kctl_3d_depth = |
| snd_ac97_find_mixer_ctl(ac97, "3D Control - Depth"); |
| |
| /* |
| * 3D register is different from AC97 standard layout |
| * (also do some renaming, to resemble Windows driver naming) |
| */ |
| if (kctl_3d_center) { |
| kctl_3d_center->private_value = |
| AC97_SINGLE_VALUE(AC97_3D_CONTROL, 1, 0x07, 0); |
| snd_ac97_rename_vol_ctl(ac97, |
| "3D Control - Center", "3D Control - Width" |
| ); |
| } |
| if (kctl_3d_depth) |
| kctl_3d_depth->private_value = |
| AC97_SINGLE_VALUE(AC97_3D_CONTROL, 8, 0x03, 0); |
| |
| /* Aztech Windows driver calls the |
| equivalent control "Modem Playback", thus rename it: */ |
| snd_ac97_rename_vol_ctl(ac97, |
| "Master Mono Playback", "Modem Playback" |
| ); |
| snd_ac97_rename_vol_ctl(ac97, |
| "Headphone Playback", "FM Synth Playback" |
| ); |
| |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_aztech_azf3328_ops = { |
| .build_specific = patch_aztech_azf3328_specific |
| }; |
| |
| static int patch_aztech_azf3328(struct snd_ac97 *ac97) |
| { |
| ac97->build_ops = &patch_aztech_azf3328_ops; |
| return 0; |
| } |
| |
| /* |
| * C-Media CM97xx codecs |
| */ |
| static void cm9738_update_jacks(struct snd_ac97 *ac97) |
| { |
| /* shared Line-In / Surround Out */ |
| snd_ac97_update_bits(ac97, AC97_CM9738_VENDOR_CTRL, 1 << 10, |
| is_shared_surrout(ac97) ? (1 << 10) : 0); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_cm9738_controls[] = { |
| AC97_SINGLE("Duplicate Front", AC97_CM9738_VENDOR_CTRL, 13, 1, 0), |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_4CH_CTL, |
| }; |
| |
| static int patch_cm9738_specific(struct snd_ac97 * ac97) |
| { |
| return patch_build_controls(ac97, snd_ac97_cm9738_controls, ARRAY_SIZE(snd_ac97_cm9738_controls)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_cm9738_ops = { |
| .build_specific = patch_cm9738_specific, |
| .update_jacks = cm9738_update_jacks |
| }; |
| |
| static int patch_cm9738(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_cm9738_ops; |
| /* FIXME: can anyone confirm below? */ |
| /* CM9738 has no PCM volume although the register reacts */ |
| ac97->flags |= AC97_HAS_NO_PCM_VOL; |
| snd_ac97_write_cache(ac97, AC97_PCM, 0x8000); |
| |
| return 0; |
| } |
| |
| static int snd_ac97_cmedia_spdif_playback_source_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[] = { "Analog", "Digital" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 2; |
| if (uinfo->value.enumerated.item > 1) |
| uinfo->value.enumerated.item = 1; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int snd_ac97_cmedia_spdif_playback_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| unsigned short val; |
| |
| val = ac97->regs[AC97_CM9739_SPDIF_CTRL]; |
| ucontrol->value.enumerated.item[0] = (val >> 1) & 0x01; |
| return 0; |
| } |
| |
| static int snd_ac97_cmedia_spdif_playback_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| return snd_ac97_update_bits(ac97, AC97_CM9739_SPDIF_CTRL, |
| 0x01 << 1, |
| (ucontrol->value.enumerated.item[0] & 0x01) << 1); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_cm9739_controls_spdif[] = { |
| /* BIT 0: SPDI_EN - always true */ |
| { /* BIT 1: SPDIFS */ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source", |
| .info = snd_ac97_cmedia_spdif_playback_source_info, |
| .get = snd_ac97_cmedia_spdif_playback_source_get, |
| .put = snd_ac97_cmedia_spdif_playback_source_put, |
| }, |
| /* BIT 2: IG_SPIV */ |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,NONE) "Valid Switch", AC97_CM9739_SPDIF_CTRL, 2, 1, 0), |
| /* BIT 3: SPI2F */ |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,NONE) "Monitor", AC97_CM9739_SPDIF_CTRL, 3, 1, 0), |
| /* BIT 4: SPI2SDI */ |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_CM9739_SPDIF_CTRL, 4, 1, 0), |
| /* BIT 8: SPD32 - 32bit SPDIF - not supported yet */ |
| }; |
| |
| static void cm9739_update_jacks(struct snd_ac97 *ac97) |
| { |
| /* shared Line-In / Surround Out */ |
| snd_ac97_update_bits(ac97, AC97_CM9739_MULTI_CHAN, 1 << 10, |
| is_shared_surrout(ac97) ? (1 << 10) : 0); |
| /* shared Mic In / Center/LFE Out **/ |
| snd_ac97_update_bits(ac97, AC97_CM9739_MULTI_CHAN, 0x3000, |
| is_shared_clfeout(ac97) ? 0x1000 : 0x2000); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_cm9739_controls[] = { |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| }; |
| |
| static int patch_cm9739_specific(struct snd_ac97 * ac97) |
| { |
| return patch_build_controls(ac97, snd_ac97_cm9739_controls, ARRAY_SIZE(snd_ac97_cm9739_controls)); |
| } |
| |
| static int patch_cm9739_post_spdif(struct snd_ac97 * ac97) |
| { |
| return patch_build_controls(ac97, snd_ac97_cm9739_controls_spdif, ARRAY_SIZE(snd_ac97_cm9739_controls_spdif)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_cm9739_ops = { |
| .build_specific = patch_cm9739_specific, |
| .build_post_spdif = patch_cm9739_post_spdif, |
| .update_jacks = cm9739_update_jacks |
| }; |
| |
| static int patch_cm9739(struct snd_ac97 * ac97) |
| { |
| unsigned short val; |
| |
| ac97->build_ops = &patch_cm9739_ops; |
| |
| /* CM9739/A has no Master and PCM volume although the register reacts */ |
| ac97->flags |= AC97_HAS_NO_MASTER_VOL | AC97_HAS_NO_PCM_VOL; |
| snd_ac97_write_cache(ac97, AC97_MASTER, 0x8000); |
| snd_ac97_write_cache(ac97, AC97_PCM, 0x8000); |
| |
| /* check spdif */ |
| val = snd_ac97_read(ac97, AC97_EXTENDED_STATUS); |
| if (val & AC97_EA_SPCV) { |
| /* enable spdif in */ |
| snd_ac97_write_cache(ac97, AC97_CM9739_SPDIF_CTRL, |
| snd_ac97_read(ac97, AC97_CM9739_SPDIF_CTRL) | 0x01); |
| ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */ |
| } else { |
| ac97->ext_id &= ~AC97_EI_SPDIF; /* disable extended-id */ |
| ac97->rates[AC97_RATES_SPDIF] = 0; |
| } |
| |
| /* set-up multi channel */ |
| /* bit 14: 0 = SPDIF, 1 = EAPD */ |
| /* bit 13: enable internal vref output for mic */ |
| /* bit 12: disable center/lfe (swithable) */ |
| /* bit 10: disable surround/line (switchable) */ |
| /* bit 9: mix 2 surround off */ |
| /* bit 4: undocumented; 0 mutes the CM9739A, which defaults to 1 */ |
| /* bit 3: undocumented; surround? */ |
| /* bit 0: dB */ |
| val = snd_ac97_read(ac97, AC97_CM9739_MULTI_CHAN) & (1 << 4); |
| val |= (1 << 3); |
| val |= (1 << 13); |
| if (! (ac97->ext_id & AC97_EI_SPDIF)) |
| val |= (1 << 14); |
| snd_ac97_write_cache(ac97, AC97_CM9739_MULTI_CHAN, val); |
| |
| /* FIXME: set up GPIO */ |
| snd_ac97_write_cache(ac97, 0x70, 0x0100); |
| snd_ac97_write_cache(ac97, 0x72, 0x0020); |
| /* Special exception for ASUS W1000/CMI9739. It does not have an SPDIF in. */ |
| if (ac97->pci && |
| ac97->subsystem_vendor == 0x1043 && |
| ac97->subsystem_device == 0x1843) { |
| snd_ac97_write_cache(ac97, AC97_CM9739_SPDIF_CTRL, |
| snd_ac97_read(ac97, AC97_CM9739_SPDIF_CTRL) & ~0x01); |
| snd_ac97_write_cache(ac97, AC97_CM9739_MULTI_CHAN, |
| snd_ac97_read(ac97, AC97_CM9739_MULTI_CHAN) | (1 << 14)); |
| } |
| |
| return 0; |
| } |
| |
| #define AC97_CM9761_MULTI_CHAN 0x64 |
| #define AC97_CM9761_FUNC 0x66 |
| #define AC97_CM9761_SPDIF_CTRL 0x6c |
| |
| static void cm9761_update_jacks(struct snd_ac97 *ac97) |
| { |
| /* FIXME: check the bits for each model |
| * model 83 is confirmed to work |
| */ |
| static unsigned short surr_on[3][2] = { |
| { 0x0008, 0x0000 }, /* 9761-78 & 82 */ |
| { 0x0000, 0x0008 }, /* 9761-82 rev.B */ |
| { 0x0000, 0x0008 }, /* 9761-83 */ |
| }; |
| static unsigned short clfe_on[3][2] = { |
| { 0x0000, 0x1000 }, /* 9761-78 & 82 */ |
| { 0x1000, 0x0000 }, /* 9761-82 rev.B */ |
| { 0x0000, 0x1000 }, /* 9761-83 */ |
| }; |
| static unsigned short surr_shared[3][2] = { |
| { 0x0000, 0x0400 }, /* 9761-78 & 82 */ |
| { 0x0000, 0x0400 }, /* 9761-82 rev.B */ |
| { 0x0000, 0x0400 }, /* 9761-83 */ |
| }; |
| static unsigned short clfe_shared[3][2] = { |
| { 0x2000, 0x0880 }, /* 9761-78 & 82 */ |
| { 0x0000, 0x2880 }, /* 9761-82 rev.B */ |
| { 0x2000, 0x0800 }, /* 9761-83 */ |
| }; |
| unsigned short val = 0; |
| |
| val |= surr_on[ac97->spec.dev_flags][is_surround_on(ac97)]; |
| val |= clfe_on[ac97->spec.dev_flags][is_clfe_on(ac97)]; |
| val |= surr_shared[ac97->spec.dev_flags][is_shared_surrout(ac97)]; |
| val |= clfe_shared[ac97->spec.dev_flags][is_shared_clfeout(ac97)]; |
| |
| snd_ac97_update_bits(ac97, AC97_CM9761_MULTI_CHAN, 0x3c88, val); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_cm9761_controls[] = { |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| }; |
| |
| static int cm9761_spdif_out_source_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[] = { "AC-Link", "ADC", "SPDIF-In" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 3; |
| if (uinfo->value.enumerated.item > 2) |
| uinfo->value.enumerated.item = 2; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int cm9761_spdif_out_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| if (ac97->regs[AC97_CM9761_FUNC] & 0x1) |
| ucontrol->value.enumerated.item[0] = 2; /* SPDIF-loopback */ |
| else if (ac97->regs[AC97_CM9761_SPDIF_CTRL] & 0x2) |
| ucontrol->value.enumerated.item[0] = 1; /* ADC loopback */ |
| else |
| ucontrol->value.enumerated.item[0] = 0; /* AC-link */ |
| return 0; |
| } |
| |
| static int cm9761_spdif_out_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); |
| |
| if (ucontrol->value.enumerated.item[0] == 2) |
| return snd_ac97_update_bits(ac97, AC97_CM9761_FUNC, 0x1, 0x1); |
| snd_ac97_update_bits(ac97, AC97_CM9761_FUNC, 0x1, 0); |
| return snd_ac97_update_bits(ac97, AC97_CM9761_SPDIF_CTRL, 0x2, |
| ucontrol->value.enumerated.item[0] == 1 ? 0x2 : 0); |
| } |
| |
| static const char *cm9761_dac_clock[] = { "AC-Link", "SPDIF-In", "Both" }; |
| static const struct ac97_enum cm9761_dac_clock_enum = |
| AC97_ENUM_SINGLE(AC97_CM9761_SPDIF_CTRL, 9, 3, cm9761_dac_clock); |
| |
| static const struct snd_kcontrol_new snd_ac97_cm9761_controls_spdif[] = { |
| { /* BIT 1: SPDIFS */ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source", |
| .info = cm9761_spdif_out_source_info, |
| .get = cm9761_spdif_out_source_get, |
| .put = cm9761_spdif_out_source_put, |
| }, |
| /* BIT 2: IG_SPIV */ |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,NONE) "Valid Switch", AC97_CM9761_SPDIF_CTRL, 2, 1, 0), |
| /* BIT 3: SPI2F */ |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,NONE) "Monitor", AC97_CM9761_SPDIF_CTRL, 3, 1, 0), |
| /* BIT 4: SPI2SDI */ |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_CM9761_SPDIF_CTRL, 4, 1, 0), |
| /* BIT 9-10: DAC_CTL */ |
| AC97_ENUM("DAC Clock Source", cm9761_dac_clock_enum), |
| }; |
| |
| static int patch_cm9761_post_spdif(struct snd_ac97 * ac97) |
| { |
| return patch_build_controls(ac97, snd_ac97_cm9761_controls_spdif, ARRAY_SIZE(snd_ac97_cm9761_controls_spdif)); |
| } |
| |
| static int patch_cm9761_specific(struct snd_ac97 * ac97) |
| { |
| return patch_build_controls(ac97, snd_ac97_cm9761_controls, ARRAY_SIZE(snd_ac97_cm9761_controls)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_cm9761_ops = { |
| .build_specific = patch_cm9761_specific, |
| .build_post_spdif = patch_cm9761_post_spdif, |
| .update_jacks = cm9761_update_jacks |
| }; |
| |
| static int patch_cm9761(struct snd_ac97 *ac97) |
| { |
| unsigned short val; |
| |
| /* CM9761 has no PCM volume although the register reacts */ |
| /* Master volume seems to have _some_ influence on the analog |
| * input sounds |
| */ |
| ac97->flags |= /*AC97_HAS_NO_MASTER_VOL |*/ AC97_HAS_NO_PCM_VOL; |
| snd_ac97_write_cache(ac97, AC97_MASTER, 0x8808); |
| snd_ac97_write_cache(ac97, AC97_PCM, 0x8808); |
| |
| ac97->spec.dev_flags = 0; /* 1 = model 82 revision B, 2 = model 83 */ |
| if (ac97->id == AC97_ID_CM9761_82) { |
| unsigned short tmp; |
| /* check page 1, reg 0x60 */ |
| val = snd_ac97_read(ac97, AC97_INT_PAGING); |
| snd_ac97_write_cache(ac97, AC97_INT_PAGING, (val & ~0x0f) | 0x01); |
| tmp = snd_ac97_read(ac97, 0x60); |
| ac97->spec.dev_flags = tmp & 1; /* revision B? */ |
| snd_ac97_write_cache(ac97, AC97_INT_PAGING, val); |
| } else if (ac97->id == AC97_ID_CM9761_83) |
| ac97->spec.dev_flags = 2; |
| |
| ac97->build_ops = &patch_cm9761_ops; |
| |
| /* enable spdif */ |
| /* force the SPDIF bit in ext_id - codec doesn't set this bit! */ |
| ac97->ext_id |= AC97_EI_SPDIF; |
| /* to be sure: we overwrite the ext status bits */ |
| snd_ac97_write_cache(ac97, AC97_EXTENDED_STATUS, 0x05c0); |
| /* Don't set 0x0200 here. This results in the silent analog output */ |
| snd_ac97_write_cache(ac97, AC97_CM9761_SPDIF_CTRL, 0x0001); /* enable spdif-in */ |
| ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */ |
| |
| /* set-up multi channel */ |
| /* bit 15: pc master beep off |
| * bit 14: pin47 = EAPD/SPDIF |
| * bit 13: vref ctl [= cm9739] |
| * bit 12: CLFE control (reverted on rev B) |
| * bit 11: Mic/center share (reverted on rev B) |
| * bit 10: suddound/line share |
| * bit 9: Analog-in mix -> surround |
| * bit 8: Analog-in mix -> CLFE |
| * bit 7: Mic/LFE share (mic/center/lfe) |
| * bit 5: vref select (9761A) |
| * bit 4: front control |
| * bit 3: surround control (revereted with rev B) |
| * bit 2: front mic |
| * bit 1: stereo mic |
| * bit 0: mic boost level (0=20dB, 1=30dB) |
| */ |
| |
| #if 0 |
| if (ac97->spec.dev_flags) |
| val = 0x0214; |
| else |
| val = 0x321c; |
| #endif |
| val = snd_ac97_read(ac97, AC97_CM9761_MULTI_CHAN); |
| val |= (1 << 4); /* front on */ |
| snd_ac97_write_cache(ac97, AC97_CM9761_MULTI_CHAN, val); |
| |
| /* FIXME: set up GPIO */ |
| snd_ac97_write_cache(ac97, 0x70, 0x0100); |
| snd_ac97_write_cache(ac97, 0x72, 0x0020); |
| |
| return 0; |
| } |
| |
| #define AC97_CM9780_SIDE 0x60 |
| #define AC97_CM9780_JACK 0x62 |
| #define AC97_CM9780_MIXER 0x64 |
| #define AC97_CM9780_MULTI_CHAN 0x66 |
| #define AC97_CM9780_SPDIF 0x6c |
| |
| static const char *cm9780_ch_select[] = { "Front", "Side", "Center/LFE", "Rear" }; |
| static const struct ac97_enum cm9780_ch_select_enum = |
| AC97_ENUM_SINGLE(AC97_CM9780_MULTI_CHAN, 6, 4, cm9780_ch_select); |
| static const struct snd_kcontrol_new cm9780_controls[] = { |
| AC97_DOUBLE("Side Playback Switch", AC97_CM9780_SIDE, 15, 7, 1, 1), |
| AC97_DOUBLE("Side Playback Volume", AC97_CM9780_SIDE, 8, 0, 31, 0), |
| AC97_ENUM("Side Playback Route", cm9780_ch_select_enum), |
| }; |
| |
| static int patch_cm9780_specific(struct snd_ac97 *ac97) |
| { |
| return patch_build_controls(ac97, cm9780_controls, ARRAY_SIZE(cm9780_controls)); |
| } |
| |
| static const struct snd_ac97_build_ops patch_cm9780_ops = { |
| .build_specific = patch_cm9780_specific, |
| .build_post_spdif = patch_cm9761_post_spdif /* identical with CM9761 */ |
| }; |
| |
| static int patch_cm9780(struct snd_ac97 *ac97) |
| { |
| unsigned short val; |
| |
| ac97->build_ops = &patch_cm9780_ops; |
| |
| /* enable spdif */ |
| if (ac97->ext_id & AC97_EI_SPDIF) { |
| ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */ |
| val = snd_ac97_read(ac97, AC97_CM9780_SPDIF); |
| val |= 0x1; /* SPDI_EN */ |
| snd_ac97_write_cache(ac97, AC97_CM9780_SPDIF, val); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * VIA VT1616 codec |
| */ |
| static const struct snd_kcontrol_new snd_ac97_controls_vt1616[] = { |
| AC97_SINGLE("DC Offset removal", 0x5a, 10, 1, 0), |
| AC97_SINGLE("Alternate Level to Surround Out", 0x5a, 15, 1, 0), |
| AC97_SINGLE("Downmix LFE and Center to Front", 0x5a, 12, 1, 0), |
| AC97_SINGLE("Downmix Surround to Front", 0x5a, 11, 1, 0), |
| }; |
| |
| static const char *slave_vols_vt1616[] = { |
| "Front Playback Volume", |
| "Surround Playback Volume", |
| "Center Playback Volume", |
| "LFE Playback Volume", |
| NULL |
| }; |
| |
| static const char *slave_sws_vt1616[] = { |
| "Front Playback Switch", |
| "Surround Playback Switch", |
| "Center Playback Switch", |
| "LFE Playback Switch", |
| NULL |
| }; |
| |
| /* find a mixer control element with the given name */ |
| static struct snd_kcontrol *snd_ac97_find_mixer_ctl(struct snd_ac97 *ac97, |
| const char *name) |
| { |
| struct snd_ctl_elem_id id; |
| memset(&id, 0, sizeof(id)); |
| id.iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| strcpy(id.name, name); |
| return snd_ctl_find_id(ac97->bus->card, &id); |
| } |
| |
| /* create a virtual master control and add slaves */ |
| static int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name, |
| const unsigned int *tlv, const char **slaves) |
| { |
| struct snd_kcontrol *kctl; |
| const char **s; |
| int err; |
| |
| kctl = snd_ctl_make_virtual_master(name, tlv); |
| if (!kctl) |
| return -ENOMEM; |
| err = snd_ctl_add(ac97->bus->card, kctl); |
| if (err < 0) |
| return err; |
| |
| for (s = slaves; *s; s++) { |
| struct snd_kcontrol *sctl; |
| |
| sctl = snd_ac97_find_mixer_ctl(ac97, *s); |
| if (!sctl) { |
| dev_dbg(ac97->bus->card->dev, |
| "Cannot find slave %s, skipped\n", *s); |
| continue; |
| } |
| err = snd_ctl_add_slave(kctl, sctl); |
| if (err < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| static int patch_vt1616_specific(struct snd_ac97 * ac97) |
| { |
| struct snd_kcontrol *kctl; |
| int err; |
| |
| if (snd_ac97_try_bit(ac97, 0x5a, 9)) |
| if ((err = patch_build_controls(ac97, &snd_ac97_controls_vt1616[0], 1)) < 0) |
| return err; |
| if ((err = patch_build_controls(ac97, &snd_ac97_controls_vt1616[1], ARRAY_SIZE(snd_ac97_controls_vt1616) - 1)) < 0) |
| return err; |
| |
| /* There is already a misnamed master switch. Rename it. */ |
| kctl = snd_ac97_find_mixer_ctl(ac97, "Master Playback Volume"); |
| if (!kctl) |
| return -EINVAL; |
| |
| snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Front Playback"); |
| |
| err = snd_ac97_add_vmaster(ac97, "Master Playback Volume", |
| kctl->tlv.p, slave_vols_vt1616); |
| if (err < 0) |
| return err; |
| |
| err = snd_ac97_add_vmaster(ac97, "Master Playback Switch", |
| NULL, slave_sws_vt1616); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_vt1616_ops = { |
| .build_specific = patch_vt1616_specific |
| }; |
| |
| static int patch_vt1616(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_vt1616_ops; |
| return 0; |
| } |
| |
| /* |
| * VT1617A codec |
| */ |
| |
| /* |
| * unfortunately, the vt1617a stashes the twiddlers required for |
| * noodling the i/o jacks on 2 different regs. that means that we can't |
| * use the easy way provided by AC97_ENUM_DOUBLE() we have to write |
| * are own funcs. |
| * |
| * NB: this is absolutely and utterly different from the vt1618. dunno |
| * about the 1616. |
| */ |
| |
| /* copied from ac97_surround_jack_mode_info() */ |
| static int snd_ac97_vt1617a_smart51_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| /* ordering in this list reflects vt1617a docs for Reg 20 and |
| * 7a and Table 6 that lays out the matrix NB WRT Table6: SM51 |
| * is SM51EN *AND* it's Bit14, not Bit15 so the table is very |
| * counter-intuitive */ |
| |
| static const char* texts[] = { "LineIn Mic1", "LineIn Mic1 Mic3", |
| "Surr LFE/C Mic3", "LineIn LFE/C Mic3", |
| "LineIn Mic2", "LineIn Mic2 Mic1", |
| "Surr LFE Mic1", "Surr LFE Mic1 Mic2"}; |
| return ac97_enum_text_info(kcontrol, uinfo, texts, 8); |
| } |
| |
| static int snd_ac97_vt1617a_smart51_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ushort usSM51, usMS; |
| |
| struct snd_ac97 *pac97; |
| |
| pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */ |
| |
| /* grab our desired bits, then mash them together in a manner |
| * consistent with Table 6 on page 17 in the 1617a docs */ |
| |
| usSM51 = snd_ac97_read(pac97, 0x7a) >> 14; |
| usMS = snd_ac97_read(pac97, 0x20) >> 8; |
| |
| ucontrol->value.enumerated.item[0] = (usSM51 << 1) + usMS; |
| |
| return 0; |
| } |
| |
| static int snd_ac97_vt1617a_smart51_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ushort usSM51, usMS, usReg; |
| |
| struct snd_ac97 *pac97; |
| |
| pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */ |
| |
| usSM51 = ucontrol->value.enumerated.item[0] >> 1; |
| usMS = ucontrol->value.enumerated.item[0] & 1; |
| |
| /* push our values into the register - consider that things will be left |
| * in a funky state if the write fails */ |
| |
| usReg = snd_ac97_read(pac97, 0x7a); |
| snd_ac97_write_cache(pac97, 0x7a, (usReg & 0x3FFF) + (usSM51 << 14)); |
| usReg = snd_ac97_read(pac97, 0x20); |
| snd_ac97_write_cache(pac97, 0x20, (usReg & 0xFEFF) + (usMS << 8)); |
| |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_vt1617a[] = { |
| |
| AC97_SINGLE("Center/LFE Exchange", 0x5a, 8, 1, 0), |
| /* |
| * These are used to enable/disable surround sound on motherboards |
| * that have 3 bidirectional analog jacks |
| */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Smart 5.1 Select", |
| .info = snd_ac97_vt1617a_smart51_info, |
| .get = snd_ac97_vt1617a_smart51_get, |
| .put = snd_ac97_vt1617a_smart51_put, |
| }, |
| }; |
| |
| static int patch_vt1617a(struct snd_ac97 * ac97) |
| { |
| int err = 0; |
| int val; |
| |
| /* we choose to not fail out at this point, but we tell the |
| caller when we return */ |
| |
| err = patch_build_controls(ac97, &snd_ac97_controls_vt1617a[0], |
| ARRAY_SIZE(snd_ac97_controls_vt1617a)); |
| |
| /* bring analog power consumption to normal by turning off the |
| * headphone amplifier, like WinXP driver for EPIA SP |
| */ |
| /* We need to check the bit before writing it. |
| * On some (many?) hardwares, setting bit actually clears it! |
| */ |
| val = snd_ac97_read(ac97, 0x5c); |
| if (!(val & 0x20)) |
| snd_ac97_write_cache(ac97, 0x5c, 0x20); |
| |
| ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */ |
| ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000; |
| ac97->build_ops = &patch_vt1616_ops; |
| |
| return err; |
| } |
| |
| /* VIA VT1618 8 CHANNEL AC97 CODEC |
| * |
| * VIA implements 'Smart 5.1' completely differently on the 1618 than |
| * it does on the 1617a. awesome! They seem to have sourced this |
| * particular revision of the technology from somebody else, it's |
| * called Universal Audio Jack and it shows up on some other folk's chips |
| * as well. |
| * |
| * ordering in this list reflects vt1618 docs for Reg 60h and |
| * the block diagram, DACs are as follows: |
| * |
| * OUT_O -> Front, |
| * OUT_1 -> Surround, |
| * OUT_2 -> C/LFE |
| * |
| * Unlike the 1617a, each OUT has a consistent set of mappings |
| * for all bitpatterns other than 00: |
| * |
| * 01 Unmixed Output |
| * 10 Line In |
| * 11 Mic In |
| * |
| * Special Case of 00: |
| * |
| * OUT_0 Mixed Output |
| * OUT_1 Reserved |
| * OUT_2 Reserved |
| * |
| * I have no idea what the hell Reserved does, but on an MSI |
| * CN700T, i have to set it to get 5.1 output - YMMV, bad |
| * shit may happen. |
| * |
| * If other chips use Universal Audio Jack, then this code might be applicable |
| * to them. |
| */ |
| |
| struct vt1618_uaj_item { |
| unsigned short mask; |
| unsigned short shift; |
| const char *items[4]; |
| }; |
| |
| /* This list reflects the vt1618 docs for Vendor Defined Register 0x60. */ |
| |
| static struct vt1618_uaj_item vt1618_uaj[3] = { |
| { |
| /* speaker jack */ |
| .mask = 0x03, |
| .shift = 0, |
| .items = { |
| "Speaker Out", "DAC Unmixed Out", "Line In", "Mic In" |
| } |
| }, |
| { |
| /* line jack */ |
| .mask = 0x0c, |
| .shift = 2, |
| .items = { |
| "Surround Out", "DAC Unmixed Out", "Line In", "Mic In" |
| } |
| }, |
| { |
| /* mic jack */ |
| .mask = 0x30, |
| .shift = 4, |
| .items = { |
| "Center LFE Out", "DAC Unmixed Out", "Line In", "Mic In" |
| }, |
| }, |
| }; |
| |
| static int snd_ac97_vt1618_UAJ_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| return ac97_enum_text_info(kcontrol, uinfo, |
| vt1618_uaj[kcontrol->private_value].items, |
| 4); |
| } |
| |
| /* All of the vt1618 Universal Audio Jack twiddlers are on |
| * Vendor Defined Register 0x60, page 0. The bits, and thus |
| * the mask, are the only thing that changes |
| */ |
| static int snd_ac97_vt1618_UAJ_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| unsigned short datpag, uaj; |
| struct snd_ac97 *pac97 = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&pac97->page_mutex); |
| |
| datpag = snd_ac97_read(pac97, AC97_INT_PAGING) & AC97_PAGE_MASK; |
| snd_ac97_update_bits(pac97, AC97_INT_PAGING, AC97_PAGE_MASK, 0); |
| |
| uaj = snd_ac97_read(pac97, 0x60) & |
| vt1618_uaj[kcontrol->private_value].mask; |
| |
| snd_ac97_update_bits(pac97, AC97_INT_PAGING, AC97_PAGE_MASK, datpag); |
| mutex_unlock(&pac97->page_mutex); |
| |
| ucontrol->value.enumerated.item[0] = uaj >> |
| vt1618_uaj[kcontrol->private_value].shift; |
| |
| return 0; |
| } |
| |
| static int snd_ac97_vt1618_UAJ_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| return ac97_update_bits_page(snd_kcontrol_chip(kcontrol), 0x60, |
| vt1618_uaj[kcontrol->private_value].mask, |
| ucontrol->value.enumerated.item[0]<< |
| vt1618_uaj[kcontrol->private_value].shift, |
| 0); |
| } |
| |
| /* config aux in jack - not found on 3 jack motherboards or soundcards */ |
| |
| static int snd_ac97_vt1618_aux_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *txt_aux[] = {"Aux In", "Back Surr Out"}; |
| |
| return ac97_enum_text_info(kcontrol, uinfo, txt_aux, 2); |
| } |
| |
| static int snd_ac97_vt1618_aux_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.enumerated.item[0] = |
| (snd_ac97_read(snd_kcontrol_chip(kcontrol), 0x5c) & 0x0008)>>3; |
| return 0; |
| } |
| |
| static int snd_ac97_vt1618_aux_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| /* toggle surround rear dac power */ |
| |
| snd_ac97_update_bits(snd_kcontrol_chip(kcontrol), 0x5c, 0x0008, |
| ucontrol->value.enumerated.item[0] << 3); |
| |
| /* toggle aux in surround rear out jack */ |
| |
| return snd_ac97_update_bits(snd_kcontrol_chip(kcontrol), 0x76, 0x0008, |
| ucontrol->value.enumerated.item[0] << 3); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_vt1618[] = { |
| AC97_SINGLE("Exchange Center/LFE", 0x5a, 8, 1, 0), |
| AC97_SINGLE("DC Offset", 0x5a, 10, 1, 0), |
| AC97_SINGLE("Soft Mute", 0x5c, 0, 1, 1), |
| AC97_SINGLE("Headphone Amp", 0x5c, 5, 1, 1), |
| AC97_DOUBLE("Back Surr Volume", 0x5e, 8, 0, 31, 1), |
| AC97_SINGLE("Back Surr Switch", 0x5e, 15, 1, 1), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Speaker Jack Mode", |
| .info = snd_ac97_vt1618_UAJ_info, |
| .get = snd_ac97_vt1618_UAJ_get, |
| .put = snd_ac97_vt1618_UAJ_put, |
| .private_value = 0 |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Line Jack Mode", |
| .info = snd_ac97_vt1618_UAJ_info, |
| .get = snd_ac97_vt1618_UAJ_get, |
| .put = snd_ac97_vt1618_UAJ_put, |
| .private_value = 1 |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Mic Jack Mode", |
| .info = snd_ac97_vt1618_UAJ_info, |
| .get = snd_ac97_vt1618_UAJ_get, |
| .put = snd_ac97_vt1618_UAJ_put, |
| .private_value = 2 |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Aux Jack Mode", |
| .info = snd_ac97_vt1618_aux_info, |
| .get = snd_ac97_vt1618_aux_get, |
| .put = snd_ac97_vt1618_aux_put, |
| } |
| }; |
| |
| static int patch_vt1618(struct snd_ac97 *ac97) |
| { |
| return patch_build_controls(ac97, snd_ac97_controls_vt1618, |
| ARRAY_SIZE(snd_ac97_controls_vt1618)); |
| } |
| |
| /* |
| */ |
| static void it2646_update_jacks(struct snd_ac97 *ac97) |
| { |
| /* shared Line-In / Surround Out */ |
| snd_ac97_update_bits(ac97, 0x76, 1 << 9, |
| is_shared_surrout(ac97) ? (1<<9) : 0); |
| /* shared Mic / Center/LFE Out */ |
| snd_ac97_update_bits(ac97, 0x76, 1 << 10, |
| is_shared_clfeout(ac97) ? (1<<10) : 0); |
| } |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_it2646[] = { |
| AC97_SURROUND_JACK_MODE_CTL, |
| AC97_CHANNEL_MODE_CTL, |
| }; |
| |
| static const struct snd_kcontrol_new snd_ac97_spdif_controls_it2646[] = { |
| AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0x76, 11, 1, 0), |
| AC97_SINGLE("Analog to IEC958 Output", 0x76, 12, 1, 0), |
| AC97_SINGLE("IEC958 Input Monitor", 0x76, 13, 1, 0), |
| }; |
| |
| static int patch_it2646_specific(struct snd_ac97 * ac97) |
| { |
| int err; |
| if ((err = patch_build_controls(ac97, snd_ac97_controls_it2646, ARRAY_SIZE(snd_ac97_controls_it2646))) < 0) |
| return err; |
| if ((err = patch_build_controls(ac97, snd_ac97_spdif_controls_it2646, ARRAY_SIZE(snd_ac97_spdif_controls_it2646))) < 0) |
| return err; |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_it2646_ops = { |
| .build_specific = patch_it2646_specific, |
| .update_jacks = it2646_update_jacks |
| }; |
| |
| static int patch_it2646(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_it2646_ops; |
| /* full DAC volume */ |
| snd_ac97_write_cache(ac97, 0x5E, 0x0808); |
| snd_ac97_write_cache(ac97, 0x7A, 0x0808); |
| return 0; |
| } |
| |
| /* |
| * Si3036 codec |
| */ |
| |
| #define AC97_SI3036_CHIP_ID 0x5a |
| #define AC97_SI3036_LINE_CFG 0x5c |
| |
| static const struct snd_kcontrol_new snd_ac97_controls_si3036[] = { |
| AC97_DOUBLE("Modem Speaker Volume", 0x5c, 14, 12, 3, 1) |
| }; |
| |
| static int patch_si3036_specific(struct snd_ac97 * ac97) |
| { |
| int idx, err; |
| for (idx = 0; idx < ARRAY_SIZE(snd_ac97_controls_si3036); idx++) |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ctl_new1(&snd_ac97_controls_si3036[idx], ac97))) < 0) |
| return err; |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_si3036_ops = { |
| .build_specific = patch_si3036_specific, |
| }; |
| |
| static int mpatch_si3036(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_si3036_ops; |
| snd_ac97_write_cache(ac97, 0x5c, 0xf210 ); |
| snd_ac97_write_cache(ac97, 0x68, 0); |
| return 0; |
| } |
| |
| /* |
| * LM 4550 Codec |
| * |
| * We use a static resolution table since LM4550 codec cannot be |
| * properly autoprobed to determine the resolution via |
| * check_volume_resolution(). |
| */ |
| |
| static struct snd_ac97_res_table lm4550_restbl[] = { |
| { AC97_MASTER, 0x1f1f }, |
| { AC97_HEADPHONE, 0x1f1f }, |
| { AC97_MASTER_MONO, 0x001f }, |
| { AC97_PC_BEEP, 0x001f }, /* LSB is ignored */ |
| { AC97_PHONE, 0x001f }, |
| { AC97_MIC, 0x001f }, |
| { AC97_LINE, 0x1f1f }, |
| { AC97_CD, 0x1f1f }, |
| { AC97_VIDEO, 0x1f1f }, |
| { AC97_AUX, 0x1f1f }, |
| { AC97_PCM, 0x1f1f }, |
| { AC97_REC_GAIN, 0x0f0f }, |
| { } /* terminator */ |
| }; |
| |
| static int patch_lm4550(struct snd_ac97 *ac97) |
| { |
| ac97->res_table = lm4550_restbl; |
| return 0; |
| } |
| |
| /* |
| * UCB1400 codec (http://www.semiconductors.philips.com/acrobat_download/datasheets/UCB1400-02.pdf) |
| */ |
| static const struct snd_kcontrol_new snd_ac97_controls_ucb1400[] = { |
| /* enable/disable headphone driver which allows direct connection to |
| stereo headphone without the use of external DC blocking |
| capacitors */ |
| AC97_SINGLE("Headphone Driver", 0x6a, 6, 1, 0), |
| /* Filter used to compensate the DC offset is added in the ADC to remove idle |
| tones from the audio band. */ |
| AC97_SINGLE("DC Filter", 0x6a, 4, 1, 0), |
| /* Control smart-low-power mode feature. Allows automatic power down |
| of unused blocks in the ADC analog front end and the PLL. */ |
| AC97_SINGLE("Smart Low Power Mode", 0x6c, 4, 3, 0), |
| }; |
| |
| static int patch_ucb1400_specific(struct snd_ac97 * ac97) |
| { |
| int idx, err; |
| for (idx = 0; idx < ARRAY_SIZE(snd_ac97_controls_ucb1400); idx++) |
| if ((err = snd_ctl_add(ac97->bus->card, snd_ctl_new1(&snd_ac97_controls_ucb1400[idx], ac97))) < 0) |
| return err; |
| return 0; |
| } |
| |
| static const struct snd_ac97_build_ops patch_ucb1400_ops = { |
| .build_specific = patch_ucb1400_specific, |
| }; |
| |
| static int patch_ucb1400(struct snd_ac97 * ac97) |
| { |
| ac97->build_ops = &patch_ucb1400_ops; |
| /* enable headphone driver and smart low power mode by default */ |
| snd_ac97_write_cache(ac97, 0x6a, 0x0050); |
| snd_ac97_write_cache(ac97, 0x6c, 0x0030); |
| return 0; |
| } |