| /* |
| * Architecture specific (PPC64) functions for kexec based crash dumps. |
| * |
| * Copyright (C) 2005, IBM Corp. |
| * |
| * Created by: Haren Myneni |
| * |
| * This source code is licensed under the GNU General Public License, |
| * Version 2. See the file COPYING for more details. |
| * |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/smp.h> |
| #include <linux/reboot.h> |
| #include <linux/kexec.h> |
| #include <linux/bootmem.h> |
| #include <linux/crash_dump.h> |
| #include <linux/delay.h> |
| #include <linux/elf.h> |
| #include <linux/elfcore.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/types.h> |
| #include <linux/memblock.h> |
| |
| #include <asm/processor.h> |
| #include <asm/machdep.h> |
| #include <asm/kexec.h> |
| #include <asm/kdump.h> |
| #include <asm/prom.h> |
| #include <asm/firmware.h> |
| #include <asm/smp.h> |
| #include <asm/system.h> |
| #include <asm/setjmp.h> |
| |
| #ifdef DEBUG |
| #include <asm/udbg.h> |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| /* This keeps a track of which one is crashing cpu. */ |
| int crashing_cpu = -1; |
| static cpumask_t cpus_in_crash = CPU_MASK_NONE; |
| cpumask_t cpus_in_sr = CPU_MASK_NONE; |
| |
| #define CRASH_HANDLER_MAX 3 |
| /* NULL terminated list of shutdown handles */ |
| static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1]; |
| static DEFINE_SPINLOCK(crash_handlers_lock); |
| |
| #ifdef CONFIG_SMP |
| static atomic_t enter_on_soft_reset = ATOMIC_INIT(0); |
| |
| void crash_ipi_callback(struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| |
| if (!cpu_online(cpu)) |
| return; |
| |
| hard_irq_disable(); |
| if (!cpumask_test_cpu(cpu, &cpus_in_crash)) |
| crash_save_cpu(regs, cpu); |
| cpumask_set_cpu(cpu, &cpus_in_crash); |
| |
| /* |
| * Entered via soft-reset - could be the kdump |
| * process is invoked using soft-reset or user activated |
| * it if some CPU did not respond to an IPI. |
| * For soft-reset, the secondary CPU can enter this func |
| * twice. 1 - using IPI, and 2. soft-reset. |
| * Tell the kexec CPU that entered via soft-reset and ready |
| * to go down. |
| */ |
| if (cpumask_test_cpu(cpu, &cpus_in_sr)) { |
| cpumask_clear_cpu(cpu, &cpus_in_sr); |
| atomic_inc(&enter_on_soft_reset); |
| } |
| |
| /* |
| * Starting the kdump boot. |
| * This barrier is needed to make sure that all CPUs are stopped. |
| * If not, soft-reset will be invoked to bring other CPUs. |
| */ |
| while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash)) |
| cpu_relax(); |
| |
| if (ppc_md.kexec_cpu_down) |
| ppc_md.kexec_cpu_down(1, 1); |
| |
| #ifdef CONFIG_PPC64 |
| kexec_smp_wait(); |
| #else |
| for (;;); /* FIXME */ |
| #endif |
| |
| /* NOTREACHED */ |
| } |
| |
| /* |
| * Wait until all CPUs are entered via soft-reset. |
| */ |
| static void crash_soft_reset_check(int cpu) |
| { |
| unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ |
| |
| cpumask_clear_cpu(cpu, &cpus_in_sr); |
| while (atomic_read(&enter_on_soft_reset) != ncpus) |
| cpu_relax(); |
| } |
| |
| |
| static void crash_kexec_prepare_cpus(int cpu) |
| { |
| unsigned int msecs; |
| |
| unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ |
| |
| crash_send_ipi(crash_ipi_callback); |
| smp_wmb(); |
| |
| /* |
| * FIXME: Until we will have the way to stop other CPUs reliably, |
| * the crash CPU will send an IPI and wait for other CPUs to |
| * respond. |
| * Delay of at least 10 seconds. |
| */ |
| printk(KERN_EMERG "Sending IPI to other cpus...\n"); |
| msecs = 10000; |
| while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) { |
| cpu_relax(); |
| mdelay(1); |
| } |
| |
| /* Would it be better to replace the trap vector here? */ |
| |
| /* |
| * FIXME: In case if we do not get all CPUs, one possibility: ask the |
| * user to do soft reset such that we get all. |
| * Soft-reset will be used until better mechanism is implemented. |
| */ |
| if (cpumask_weight(&cpus_in_crash) < ncpus) { |
| printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n", |
| ncpus - cpumask_weight(&cpus_in_crash)); |
| printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n"); |
| cpumask_clear(&cpus_in_sr); |
| atomic_set(&enter_on_soft_reset, 0); |
| while (cpumask_weight(&cpus_in_crash) < ncpus) |
| cpu_relax(); |
| } |
| /* |
| * Make sure all CPUs are entered via soft-reset if the kdump is |
| * invoked using soft-reset. |
| */ |
| if (cpumask_test_cpu(cpu, &cpus_in_sr)) |
| crash_soft_reset_check(cpu); |
| /* Leave the IPI callback set */ |
| } |
| |
| /* |
| * This function will be called by secondary cpus or by kexec cpu |
| * if soft-reset is activated to stop some CPUs. |
| */ |
| void crash_kexec_secondary(struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| unsigned long flags; |
| int msecs = 5; |
| |
| local_irq_save(flags); |
| /* Wait 5ms if the kexec CPU is not entered yet. */ |
| while (crashing_cpu < 0) { |
| if (--msecs < 0) { |
| /* |
| * Either kdump image is not loaded or |
| * kdump process is not started - Probably xmon |
| * exited using 'x'(exit and recover) or |
| * kexec_should_crash() failed for all running tasks. |
| */ |
| cpumask_clear_cpu(cpu, &cpus_in_sr); |
| local_irq_restore(flags); |
| return; |
| } |
| mdelay(1); |
| cpu_relax(); |
| } |
| if (cpu == crashing_cpu) { |
| /* |
| * Panic CPU will enter this func only via soft-reset. |
| * Wait until all secondary CPUs entered and |
| * then start kexec boot. |
| */ |
| crash_soft_reset_check(cpu); |
| cpumask_set_cpu(crashing_cpu, &cpus_in_crash); |
| if (ppc_md.kexec_cpu_down) |
| ppc_md.kexec_cpu_down(1, 0); |
| machine_kexec(kexec_crash_image); |
| /* NOTREACHED */ |
| } |
| crash_ipi_callback(regs); |
| } |
| |
| #else /* ! CONFIG_SMP */ |
| |
| static void crash_kexec_prepare_cpus(int cpu) |
| { |
| /* |
| * move the secondarys to us so that we can copy |
| * the new kernel 0-0x100 safely |
| * |
| * do this if kexec in setup.c ? |
| */ |
| #ifdef CONFIG_PPC64 |
| smp_release_cpus(); |
| #else |
| /* FIXME */ |
| #endif |
| } |
| |
| void crash_kexec_secondary(struct pt_regs *regs) |
| { |
| cpumask_clear(&cpus_in_sr); |
| } |
| #endif /* CONFIG_SMP */ |
| |
| /* wait for all the CPUs to hit real mode but timeout if they don't come in */ |
| #if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64) |
| static void crash_kexec_wait_realmode(int cpu) |
| { |
| unsigned int msecs; |
| int i; |
| |
| msecs = 10000; |
| for (i=0; i < nr_cpu_ids && msecs > 0; i++) { |
| if (i == cpu) |
| continue; |
| |
| while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) { |
| barrier(); |
| if (!cpu_possible(i) || !cpu_online(i) || (msecs <= 0)) |
| break; |
| msecs--; |
| mdelay(1); |
| } |
| } |
| mb(); |
| } |
| #else |
| static inline void crash_kexec_wait_realmode(int cpu) {} |
| #endif /* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */ |
| |
| /* |
| * Register a function to be called on shutdown. Only use this if you |
| * can't reset your device in the second kernel. |
| */ |
| int crash_shutdown_register(crash_shutdown_t handler) |
| { |
| unsigned int i, rc; |
| |
| spin_lock(&crash_handlers_lock); |
| for (i = 0 ; i < CRASH_HANDLER_MAX; i++) |
| if (!crash_shutdown_handles[i]) { |
| /* Insert handle at first empty entry */ |
| crash_shutdown_handles[i] = handler; |
| rc = 0; |
| break; |
| } |
| |
| if (i == CRASH_HANDLER_MAX) { |
| printk(KERN_ERR "Crash shutdown handles full, " |
| "not registered.\n"); |
| rc = 1; |
| } |
| |
| spin_unlock(&crash_handlers_lock); |
| return rc; |
| } |
| EXPORT_SYMBOL(crash_shutdown_register); |
| |
| int crash_shutdown_unregister(crash_shutdown_t handler) |
| { |
| unsigned int i, rc; |
| |
| spin_lock(&crash_handlers_lock); |
| for (i = 0 ; i < CRASH_HANDLER_MAX; i++) |
| if (crash_shutdown_handles[i] == handler) |
| break; |
| |
| if (i == CRASH_HANDLER_MAX) { |
| printk(KERN_ERR "Crash shutdown handle not found\n"); |
| rc = 1; |
| } else { |
| /* Shift handles down */ |
| for (; crash_shutdown_handles[i]; i++) |
| crash_shutdown_handles[i] = |
| crash_shutdown_handles[i+1]; |
| rc = 0; |
| } |
| |
| spin_unlock(&crash_handlers_lock); |
| return rc; |
| } |
| EXPORT_SYMBOL(crash_shutdown_unregister); |
| |
| static unsigned long crash_shutdown_buf[JMP_BUF_LEN]; |
| static int crash_shutdown_cpu = -1; |
| |
| static int handle_fault(struct pt_regs *regs) |
| { |
| if (crash_shutdown_cpu == smp_processor_id()) |
| longjmp(crash_shutdown_buf, 1); |
| return 0; |
| } |
| |
| void default_machine_crash_shutdown(struct pt_regs *regs) |
| { |
| unsigned int i; |
| int (*old_handler)(struct pt_regs *regs); |
| |
| |
| /* |
| * This function is only called after the system |
| * has panicked or is otherwise in a critical state. |
| * The minimum amount of code to allow a kexec'd kernel |
| * to run successfully needs to happen here. |
| * |
| * In practice this means stopping other cpus in |
| * an SMP system. |
| * The kernel is broken so disable interrupts. |
| */ |
| hard_irq_disable(); |
| |
| /* |
| * Make a note of crashing cpu. Will be used in machine_kexec |
| * such that another IPI will not be sent. |
| */ |
| crashing_cpu = smp_processor_id(); |
| crash_save_cpu(regs, crashing_cpu); |
| crash_kexec_prepare_cpus(crashing_cpu); |
| cpumask_set_cpu(crashing_cpu, &cpus_in_crash); |
| crash_kexec_wait_realmode(crashing_cpu); |
| |
| machine_kexec_mask_interrupts(); |
| |
| /* |
| * Call registered shutdown routines savely. Swap out |
| * __debugger_fault_handler, and replace on exit. |
| */ |
| old_handler = __debugger_fault_handler; |
| __debugger_fault_handler = handle_fault; |
| crash_shutdown_cpu = smp_processor_id(); |
| for (i = 0; crash_shutdown_handles[i]; i++) { |
| if (setjmp(crash_shutdown_buf) == 0) { |
| /* |
| * Insert syncs and delay to ensure |
| * instructions in the dangerous region don't |
| * leak away from this protected region. |
| */ |
| asm volatile("sync; isync"); |
| /* dangerous region */ |
| crash_shutdown_handles[i](); |
| asm volatile("sync; isync"); |
| } |
| } |
| crash_shutdown_cpu = -1; |
| __debugger_fault_handler = old_handler; |
| |
| if (ppc_md.kexec_cpu_down) |
| ppc_md.kexec_cpu_down(1, 0); |
| } |