| /* |
| * Copyright (C) 2012 Samsung Electronics Co.Ltd |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/mms114.h> |
| #include <linux/input/mt.h> |
| #include <linux/interrupt.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| |
| /* Write only registers */ |
| #define MMS114_MODE_CONTROL 0x01 |
| #define MMS114_OPERATION_MODE_MASK 0xE |
| #define MMS114_ACTIVE (1 << 1) |
| |
| #define MMS114_XY_RESOLUTION_H 0x02 |
| #define MMS114_X_RESOLUTION 0x03 |
| #define MMS114_Y_RESOLUTION 0x04 |
| #define MMS114_CONTACT_THRESHOLD 0x05 |
| #define MMS114_MOVING_THRESHOLD 0x06 |
| |
| /* Read only registers */ |
| #define MMS114_PACKET_SIZE 0x0F |
| #define MMS114_INFOMATION 0x10 |
| #define MMS114_TSP_REV 0xF0 |
| |
| /* Minimum delay time is 50us between stop and start signal of i2c */ |
| #define MMS114_I2C_DELAY 50 |
| |
| /* 200ms needs after power on */ |
| #define MMS114_POWERON_DELAY 200 |
| |
| /* Touchscreen absolute values */ |
| #define MMS114_MAX_AREA 0xff |
| |
| #define MMS114_MAX_TOUCH 10 |
| #define MMS114_PACKET_NUM 8 |
| |
| /* Touch type */ |
| #define MMS114_TYPE_NONE 0 |
| #define MMS114_TYPE_TOUCHSCREEN 1 |
| #define MMS114_TYPE_TOUCHKEY 2 |
| |
| struct mms114_data { |
| struct i2c_client *client; |
| struct input_dev *input_dev; |
| struct regulator *core_reg; |
| struct regulator *io_reg; |
| const struct mms114_platform_data *pdata; |
| |
| /* Use cache data for mode control register(write only) */ |
| u8 cache_mode_control; |
| }; |
| |
| struct mms114_touch { |
| u8 id:4, reserved_bit4:1, type:2, pressed:1; |
| u8 x_hi:4, y_hi:4; |
| u8 x_lo; |
| u8 y_lo; |
| u8 width; |
| u8 strength; |
| u8 reserved[2]; |
| } __packed; |
| |
| static int __mms114_read_reg(struct mms114_data *data, unsigned int reg, |
| unsigned int len, u8 *val) |
| { |
| struct i2c_client *client = data->client; |
| struct i2c_msg xfer[2]; |
| u8 buf = reg & 0xff; |
| int error; |
| |
| if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL) |
| BUG(); |
| |
| /* Write register: use repeated start */ |
| xfer[0].addr = client->addr; |
| xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART; |
| xfer[0].len = 1; |
| xfer[0].buf = &buf; |
| |
| /* Read data */ |
| xfer[1].addr = client->addr; |
| xfer[1].flags = I2C_M_RD; |
| xfer[1].len = len; |
| xfer[1].buf = val; |
| |
| error = i2c_transfer(client->adapter, xfer, 2); |
| if (error != 2) { |
| dev_err(&client->dev, |
| "%s: i2c transfer failed (%d)\n", __func__, error); |
| return error < 0 ? error : -EIO; |
| } |
| udelay(MMS114_I2C_DELAY); |
| |
| return 0; |
| } |
| |
| static int mms114_read_reg(struct mms114_data *data, unsigned int reg) |
| { |
| u8 val; |
| int error; |
| |
| if (reg == MMS114_MODE_CONTROL) |
| return data->cache_mode_control; |
| |
| error = __mms114_read_reg(data, reg, 1, &val); |
| return error < 0 ? error : val; |
| } |
| |
| static int mms114_write_reg(struct mms114_data *data, unsigned int reg, |
| unsigned int val) |
| { |
| struct i2c_client *client = data->client; |
| u8 buf[2]; |
| int error; |
| |
| buf[0] = reg & 0xff; |
| buf[1] = val & 0xff; |
| |
| error = i2c_master_send(client, buf, 2); |
| if (error != 2) { |
| dev_err(&client->dev, |
| "%s: i2c send failed (%d)\n", __func__, error); |
| return error < 0 ? error : -EIO; |
| } |
| udelay(MMS114_I2C_DELAY); |
| |
| if (reg == MMS114_MODE_CONTROL) |
| data->cache_mode_control = val; |
| |
| return 0; |
| } |
| |
| static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch) |
| { |
| const struct mms114_platform_data *pdata = data->pdata; |
| struct i2c_client *client = data->client; |
| struct input_dev *input_dev = data->input_dev; |
| unsigned int id; |
| unsigned int x; |
| unsigned int y; |
| |
| if (touch->id > MMS114_MAX_TOUCH) { |
| dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id); |
| return; |
| } |
| |
| if (touch->type != MMS114_TYPE_TOUCHSCREEN) { |
| dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type); |
| return; |
| } |
| |
| id = touch->id - 1; |
| x = touch->x_lo | touch->x_hi << 8; |
| y = touch->y_lo | touch->y_hi << 8; |
| if (x > pdata->x_size || y > pdata->y_size) { |
| dev_dbg(&client->dev, |
| "Wrong touch coordinates (%d, %d)\n", x, y); |
| return; |
| } |
| |
| if (pdata->x_invert) |
| x = pdata->x_size - x; |
| if (pdata->y_invert) |
| y = pdata->y_size - y; |
| |
| dev_dbg(&client->dev, |
| "id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n", |
| id, touch->type, touch->pressed, |
| x, y, touch->width, touch->strength); |
| |
| input_mt_slot(input_dev, id); |
| input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed); |
| |
| if (touch->pressed) { |
| input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width); |
| input_report_abs(input_dev, ABS_MT_POSITION_X, x); |
| input_report_abs(input_dev, ABS_MT_POSITION_Y, y); |
| input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength); |
| } |
| } |
| |
| static irqreturn_t mms114_interrupt(int irq, void *dev_id) |
| { |
| struct mms114_data *data = dev_id; |
| struct input_dev *input_dev = data->input_dev; |
| struct mms114_touch touch[MMS114_MAX_TOUCH]; |
| int packet_size; |
| int touch_size; |
| int index; |
| int error; |
| |
| mutex_lock(&input_dev->mutex); |
| if (!input_dev->users) { |
| mutex_unlock(&input_dev->mutex); |
| goto out; |
| } |
| mutex_unlock(&input_dev->mutex); |
| |
| packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); |
| if (packet_size <= 0) |
| goto out; |
| |
| touch_size = packet_size / MMS114_PACKET_NUM; |
| |
| error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size, |
| (u8 *)touch); |
| if (error < 0) |
| goto out; |
| |
| for (index = 0; index < touch_size; index++) |
| mms114_process_mt(data, touch + index); |
| |
| input_mt_report_pointer_emulation(data->input_dev, true); |
| input_sync(data->input_dev); |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int mms114_set_active(struct mms114_data *data, bool active) |
| { |
| int val; |
| |
| val = mms114_read_reg(data, MMS114_MODE_CONTROL); |
| if (val < 0) |
| return val; |
| |
| val &= ~MMS114_OPERATION_MODE_MASK; |
| |
| /* If active is false, sleep mode */ |
| if (active) |
| val |= MMS114_ACTIVE; |
| |
| return mms114_write_reg(data, MMS114_MODE_CONTROL, val); |
| } |
| |
| static int mms114_get_version(struct mms114_data *data) |
| { |
| struct device *dev = &data->client->dev; |
| u8 buf[6]; |
| int error; |
| |
| error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf); |
| if (error < 0) |
| return error; |
| |
| dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n", |
| buf[0], buf[1], buf[3]); |
| |
| return 0; |
| } |
| |
| static int mms114_setup_regs(struct mms114_data *data) |
| { |
| const struct mms114_platform_data *pdata = data->pdata; |
| int val; |
| int error; |
| |
| error = mms114_get_version(data); |
| if (error < 0) |
| return error; |
| |
| error = mms114_set_active(data, true); |
| if (error < 0) |
| return error; |
| |
| val = (pdata->x_size >> 8) & 0xf; |
| val |= ((pdata->y_size >> 8) & 0xf) << 4; |
| error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val); |
| if (error < 0) |
| return error; |
| |
| val = pdata->x_size & 0xff; |
| error = mms114_write_reg(data, MMS114_X_RESOLUTION, val); |
| if (error < 0) |
| return error; |
| |
| val = pdata->y_size & 0xff; |
| error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val); |
| if (error < 0) |
| return error; |
| |
| if (pdata->contact_threshold) { |
| error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD, |
| pdata->contact_threshold); |
| if (error < 0) |
| return error; |
| } |
| |
| if (pdata->moving_threshold) { |
| error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD, |
| pdata->moving_threshold); |
| if (error < 0) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int mms114_start(struct mms114_data *data) |
| { |
| struct i2c_client *client = data->client; |
| int error; |
| |
| error = regulator_enable(data->core_reg); |
| if (error) { |
| dev_err(&client->dev, "Failed to enable avdd: %d\n", error); |
| return error; |
| } |
| |
| error = regulator_enable(data->io_reg); |
| if (error) { |
| dev_err(&client->dev, "Failed to enable vdd: %d\n", error); |
| regulator_disable(data->core_reg); |
| return error; |
| } |
| |
| mdelay(MMS114_POWERON_DELAY); |
| |
| error = mms114_setup_regs(data); |
| if (error < 0) { |
| regulator_disable(data->io_reg); |
| regulator_disable(data->core_reg); |
| return error; |
| } |
| |
| if (data->pdata->cfg_pin) |
| data->pdata->cfg_pin(true); |
| |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static void mms114_stop(struct mms114_data *data) |
| { |
| struct i2c_client *client = data->client; |
| int error; |
| |
| disable_irq(client->irq); |
| |
| if (data->pdata->cfg_pin) |
| data->pdata->cfg_pin(false); |
| |
| error = regulator_disable(data->io_reg); |
| if (error) |
| dev_warn(&client->dev, "Failed to disable vdd: %d\n", error); |
| |
| error = regulator_disable(data->core_reg); |
| if (error) |
| dev_warn(&client->dev, "Failed to disable avdd: %d\n", error); |
| } |
| |
| static int mms114_input_open(struct input_dev *dev) |
| { |
| struct mms114_data *data = input_get_drvdata(dev); |
| |
| return mms114_start(data); |
| } |
| |
| static void mms114_input_close(struct input_dev *dev) |
| { |
| struct mms114_data *data = input_get_drvdata(dev); |
| |
| mms114_stop(data); |
| } |
| |
| #ifdef CONFIG_OF |
| static struct mms114_platform_data *mms114_parse_dt(struct device *dev) |
| { |
| struct mms114_platform_data *pdata; |
| struct device_node *np = dev->of_node; |
| |
| if (!np) |
| return NULL; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| dev_err(dev, "failed to allocate platform data\n"); |
| return NULL; |
| } |
| |
| if (of_property_read_u32(np, "x-size", &pdata->x_size)) { |
| dev_err(dev, "failed to get x-size property\n"); |
| return NULL; |
| }; |
| |
| if (of_property_read_u32(np, "y-size", &pdata->y_size)) { |
| dev_err(dev, "failed to get y-size property\n"); |
| return NULL; |
| }; |
| |
| of_property_read_u32(np, "contact-threshold", |
| &pdata->contact_threshold); |
| of_property_read_u32(np, "moving-threshold", |
| &pdata->moving_threshold); |
| |
| if (of_find_property(np, "x-invert", NULL)) |
| pdata->x_invert = true; |
| if (of_find_property(np, "y-invert", NULL)) |
| pdata->y_invert = true; |
| |
| return pdata; |
| } |
| #else |
| static inline struct mms114_platform_data *mms114_parse_dt(struct device *dev) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static int mms114_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| const struct mms114_platform_data *pdata; |
| struct mms114_data *data; |
| struct input_dev *input_dev; |
| int error; |
| |
| pdata = dev_get_platdata(&client->dev); |
| if (!pdata) |
| pdata = mms114_parse_dt(&client->dev); |
| |
| if (!pdata) { |
| dev_err(&client->dev, "Need platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_PROTOCOL_MANGLING)) { |
| dev_err(&client->dev, |
| "Need i2c bus that supports protocol mangling\n"); |
| return -ENODEV; |
| } |
| |
| data = devm_kzalloc(&client->dev, sizeof(struct mms114_data), |
| GFP_KERNEL); |
| input_dev = devm_input_allocate_device(&client->dev); |
| if (!data || !input_dev) { |
| dev_err(&client->dev, "Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| data->client = client; |
| data->input_dev = input_dev; |
| data->pdata = pdata; |
| |
| input_dev->name = "MELFAS MMS114 Touchscreen"; |
| input_dev->id.bustype = BUS_I2C; |
| input_dev->dev.parent = &client->dev; |
| input_dev->open = mms114_input_open; |
| input_dev->close = mms114_input_close; |
| |
| __set_bit(EV_ABS, input_dev->evbit); |
| __set_bit(EV_KEY, input_dev->evbit); |
| __set_bit(BTN_TOUCH, input_dev->keybit); |
| input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0); |
| input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0); |
| |
| /* For multi touch */ |
| input_mt_init_slots(input_dev, MMS114_MAX_TOUCH, 0); |
| input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, |
| 0, MMS114_MAX_AREA, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, |
| 0, data->pdata->x_size, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, |
| 0, data->pdata->y_size, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0); |
| |
| input_set_drvdata(input_dev, data); |
| i2c_set_clientdata(client, data); |
| |
| data->core_reg = devm_regulator_get(&client->dev, "avdd"); |
| if (IS_ERR(data->core_reg)) { |
| error = PTR_ERR(data->core_reg); |
| dev_err(&client->dev, |
| "Unable to get the Core regulator (%d)\n", error); |
| return error; |
| } |
| |
| data->io_reg = devm_regulator_get(&client->dev, "vdd"); |
| if (IS_ERR(data->io_reg)) { |
| error = PTR_ERR(data->io_reg); |
| dev_err(&client->dev, |
| "Unable to get the IO regulator (%d)\n", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, NULL, |
| mms114_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| dev_name(&client->dev), data); |
| if (error) { |
| dev_err(&client->dev, "Failed to register interrupt\n"); |
| return error; |
| } |
| disable_irq(client->irq); |
| |
| error = input_register_device(data->input_dev); |
| if (error) { |
| dev_err(&client->dev, "Failed to register input device\n"); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mms114_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct mms114_data *data = i2c_get_clientdata(client); |
| struct input_dev *input_dev = data->input_dev; |
| int id; |
| |
| /* Release all touch */ |
| for (id = 0; id < MMS114_MAX_TOUCH; id++) { |
| input_mt_slot(input_dev, id); |
| input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false); |
| } |
| |
| input_mt_report_pointer_emulation(input_dev, true); |
| input_sync(input_dev); |
| |
| mutex_lock(&input_dev->mutex); |
| if (input_dev->users) |
| mms114_stop(data); |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| |
| static int mms114_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct mms114_data *data = i2c_get_clientdata(client); |
| struct input_dev *input_dev = data->input_dev; |
| int error; |
| |
| mutex_lock(&input_dev->mutex); |
| if (input_dev->users) { |
| error = mms114_start(data); |
| if (error < 0) { |
| mutex_unlock(&input_dev->mutex); |
| return error; |
| } |
| } |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume); |
| |
| static const struct i2c_device_id mms114_id[] = { |
| { "mms114", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mms114_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id mms114_dt_match[] = { |
| { .compatible = "melfas,mms114" }, |
| { } |
| }; |
| #endif |
| |
| static struct i2c_driver mms114_driver = { |
| .driver = { |
| .name = "mms114", |
| .owner = THIS_MODULE, |
| .pm = &mms114_pm_ops, |
| .of_match_table = of_match_ptr(mms114_dt_match), |
| }, |
| .probe = mms114_probe, |
| .id_table = mms114_id, |
| }; |
| |
| module_i2c_driver(mms114_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver"); |
| MODULE_LICENSE("GPL"); |