| /**************************************************************************** |
| * Driver for Solarflare network controllers and boards |
| * Copyright 2005-2006 Fen Systems Ltd. |
| * Copyright 2005-2013 Solarflare Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation, incorporated herein by reference. |
| */ |
| |
| /* Common definitions for all Efx net driver code */ |
| |
| #ifndef EFX_NET_DRIVER_H |
| #define EFX_NET_DRIVER_H |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| #include <linux/timer.h> |
| #include <linux/mdio.h> |
| #include <linux/list.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| #include <linux/highmem.h> |
| #include <linux/workqueue.h> |
| #include <linux/mutex.h> |
| #include <linux/vmalloc.h> |
| #include <linux/i2c.h> |
| #include <linux/mtd/mtd.h> |
| |
| #include "enum.h" |
| #include "bitfield.h" |
| #include "filter.h" |
| |
| /************************************************************************** |
| * |
| * Build definitions |
| * |
| **************************************************************************/ |
| |
| #define EFX_DRIVER_VERSION "4.0" |
| |
| #ifdef DEBUG |
| #define EFX_BUG_ON_PARANOID(x) BUG_ON(x) |
| #define EFX_WARN_ON_PARANOID(x) WARN_ON(x) |
| #else |
| #define EFX_BUG_ON_PARANOID(x) do {} while (0) |
| #define EFX_WARN_ON_PARANOID(x) do {} while (0) |
| #endif |
| |
| /************************************************************************** |
| * |
| * Efx data structures |
| * |
| **************************************************************************/ |
| |
| #define EFX_MAX_CHANNELS 32U |
| #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS |
| #define EFX_EXTRA_CHANNEL_IOV 0 |
| #define EFX_EXTRA_CHANNEL_PTP 1 |
| #define EFX_MAX_EXTRA_CHANNELS 2U |
| |
| /* Checksum generation is a per-queue option in hardware, so each |
| * queue visible to the networking core is backed by two hardware TX |
| * queues. */ |
| #define EFX_MAX_TX_TC 2 |
| #define EFX_MAX_CORE_TX_QUEUES (EFX_MAX_TX_TC * EFX_MAX_CHANNELS) |
| #define EFX_TXQ_TYPE_OFFLOAD 1 /* flag */ |
| #define EFX_TXQ_TYPE_HIGHPRI 2 /* flag */ |
| #define EFX_TXQ_TYPES 4 |
| #define EFX_MAX_TX_QUEUES (EFX_TXQ_TYPES * EFX_MAX_CHANNELS) |
| |
| /* Maximum possible MTU the driver supports */ |
| #define EFX_MAX_MTU (9 * 1024) |
| |
| /* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page, |
| * and should be a multiple of the cache line size. |
| */ |
| #define EFX_RX_USR_BUF_SIZE (2048 - 256) |
| |
| /* If possible, we should ensure cache line alignment at start and end |
| * of every buffer. Otherwise, we just need to ensure 4-byte |
| * alignment of the network header. |
| */ |
| #if NET_IP_ALIGN == 0 |
| #define EFX_RX_BUF_ALIGNMENT L1_CACHE_BYTES |
| #else |
| #define EFX_RX_BUF_ALIGNMENT 4 |
| #endif |
| |
| /* Forward declare Precision Time Protocol (PTP) support structure. */ |
| struct efx_ptp_data; |
| struct hwtstamp_config; |
| |
| struct efx_self_tests; |
| |
| /** |
| * struct efx_buffer - A general-purpose DMA buffer |
| * @addr: host base address of the buffer |
| * @dma_addr: DMA base address of the buffer |
| * @len: Buffer length, in bytes |
| * |
| * The NIC uses these buffers for its interrupt status registers and |
| * MAC stats dumps. |
| */ |
| struct efx_buffer { |
| void *addr; |
| dma_addr_t dma_addr; |
| unsigned int len; |
| }; |
| |
| /** |
| * struct efx_special_buffer - DMA buffer entered into buffer table |
| * @buf: Standard &struct efx_buffer |
| * @index: Buffer index within controller;s buffer table |
| * @entries: Number of buffer table entries |
| * |
| * The NIC has a buffer table that maps buffers of size %EFX_BUF_SIZE. |
| * Event and descriptor rings are addressed via one or more buffer |
| * table entries (and so can be physically non-contiguous, although we |
| * currently do not take advantage of that). On Falcon and Siena we |
| * have to take care of allocating and initialising the entries |
| * ourselves. On later hardware this is managed by the firmware and |
| * @index and @entries are left as 0. |
| */ |
| struct efx_special_buffer { |
| struct efx_buffer buf; |
| unsigned int index; |
| unsigned int entries; |
| }; |
| |
| /** |
| * struct efx_tx_buffer - buffer state for a TX descriptor |
| * @skb: When @flags & %EFX_TX_BUF_SKB, the associated socket buffer to be |
| * freed when descriptor completes |
| * @heap_buf: When @flags & %EFX_TX_BUF_HEAP, the associated heap buffer to be |
| * freed when descriptor completes. |
| * @option: When @flags & %EFX_TX_BUF_OPTION, a NIC-specific option descriptor. |
| * @dma_addr: DMA address of the fragment. |
| * @flags: Flags for allocation and DMA mapping type |
| * @len: Length of this fragment. |
| * This field is zero when the queue slot is empty. |
| * @unmap_len: Length of this fragment to unmap |
| * @dma_offset: Offset of @dma_addr from the address of the backing DMA mapping. |
| * Only valid if @unmap_len != 0. |
| */ |
| struct efx_tx_buffer { |
| union { |
| const struct sk_buff *skb; |
| void *heap_buf; |
| }; |
| union { |
| efx_qword_t option; |
| dma_addr_t dma_addr; |
| }; |
| unsigned short flags; |
| unsigned short len; |
| unsigned short unmap_len; |
| unsigned short dma_offset; |
| }; |
| #define EFX_TX_BUF_CONT 1 /* not last descriptor of packet */ |
| #define EFX_TX_BUF_SKB 2 /* buffer is last part of skb */ |
| #define EFX_TX_BUF_HEAP 4 /* buffer was allocated with kmalloc() */ |
| #define EFX_TX_BUF_MAP_SINGLE 8 /* buffer was mapped with dma_map_single() */ |
| #define EFX_TX_BUF_OPTION 0x10 /* empty buffer for option descriptor */ |
| |
| /** |
| * struct efx_tx_queue - An Efx TX queue |
| * |
| * This is a ring buffer of TX fragments. |
| * Since the TX completion path always executes on the same |
| * CPU and the xmit path can operate on different CPUs, |
| * performance is increased by ensuring that the completion |
| * path and the xmit path operate on different cache lines. |
| * This is particularly important if the xmit path is always |
| * executing on one CPU which is different from the completion |
| * path. There is also a cache line for members which are |
| * read but not written on the fast path. |
| * |
| * @efx: The associated Efx NIC |
| * @queue: DMA queue number |
| * @channel: The associated channel |
| * @core_txq: The networking core TX queue structure |
| * @buffer: The software buffer ring |
| * @tsoh_page: Array of pages of TSO header buffers |
| * @txd: The hardware descriptor ring |
| * @ptr_mask: The size of the ring minus 1. |
| * @piobuf: PIO buffer region for this TX queue (shared with its partner). |
| * Size of the region is efx_piobuf_size. |
| * @piobuf_offset: Buffer offset to be specified in PIO descriptors |
| * @initialised: Has hardware queue been initialised? |
| * @read_count: Current read pointer. |
| * This is the number of buffers that have been removed from both rings. |
| * @old_write_count: The value of @write_count when last checked. |
| * This is here for performance reasons. The xmit path will |
| * only get the up-to-date value of @write_count if this |
| * variable indicates that the queue is empty. This is to |
| * avoid cache-line ping-pong between the xmit path and the |
| * completion path. |
| * @merge_events: Number of TX merged completion events |
| * @insert_count: Current insert pointer |
| * This is the number of buffers that have been added to the |
| * software ring. |
| * @write_count: Current write pointer |
| * This is the number of buffers that have been added to the |
| * hardware ring. |
| * @old_read_count: The value of read_count when last checked. |
| * This is here for performance reasons. The xmit path will |
| * only get the up-to-date value of read_count if this |
| * variable indicates that the queue is full. This is to |
| * avoid cache-line ping-pong between the xmit path and the |
| * completion path. |
| * @tso_bursts: Number of times TSO xmit invoked by kernel |
| * @tso_long_headers: Number of packets with headers too long for standard |
| * blocks |
| * @tso_packets: Number of packets via the TSO xmit path |
| * @pushes: Number of times the TX push feature has been used |
| * @pio_packets: Number of times the TX PIO feature has been used |
| * @empty_read_count: If the completion path has seen the queue as empty |
| * and the transmission path has not yet checked this, the value of |
| * @read_count bitwise-added to %EFX_EMPTY_COUNT_VALID; otherwise 0. |
| */ |
| struct efx_tx_queue { |
| /* Members which don't change on the fast path */ |
| struct efx_nic *efx ____cacheline_aligned_in_smp; |
| unsigned queue; |
| struct efx_channel *channel; |
| struct netdev_queue *core_txq; |
| struct efx_tx_buffer *buffer; |
| struct efx_buffer *tsoh_page; |
| struct efx_special_buffer txd; |
| unsigned int ptr_mask; |
| void __iomem *piobuf; |
| unsigned int piobuf_offset; |
| bool initialised; |
| |
| /* Members used mainly on the completion path */ |
| unsigned int read_count ____cacheline_aligned_in_smp; |
| unsigned int old_write_count; |
| unsigned int merge_events; |
| |
| /* Members used only on the xmit path */ |
| unsigned int insert_count ____cacheline_aligned_in_smp; |
| unsigned int write_count; |
| unsigned int old_read_count; |
| unsigned int tso_bursts; |
| unsigned int tso_long_headers; |
| unsigned int tso_packets; |
| unsigned int pushes; |
| unsigned int pio_packets; |
| |
| /* Members shared between paths and sometimes updated */ |
| unsigned int empty_read_count ____cacheline_aligned_in_smp; |
| #define EFX_EMPTY_COUNT_VALID 0x80000000 |
| atomic_t flush_outstanding; |
| }; |
| |
| /** |
| * struct efx_rx_buffer - An Efx RX data buffer |
| * @dma_addr: DMA base address of the buffer |
| * @page: The associated page buffer. |
| * Will be %NULL if the buffer slot is currently free. |
| * @page_offset: If pending: offset in @page of DMA base address. |
| * If completed: offset in @page of Ethernet header. |
| * @len: If pending: length for DMA descriptor. |
| * If completed: received length, excluding hash prefix. |
| * @flags: Flags for buffer and packet state. These are only set on the |
| * first buffer of a scattered packet. |
| */ |
| struct efx_rx_buffer { |
| dma_addr_t dma_addr; |
| struct page *page; |
| u16 page_offset; |
| u16 len; |
| u16 flags; |
| }; |
| #define EFX_RX_BUF_LAST_IN_PAGE 0x0001 |
| #define EFX_RX_PKT_CSUMMED 0x0002 |
| #define EFX_RX_PKT_DISCARD 0x0004 |
| #define EFX_RX_PKT_TCP 0x0040 |
| #define EFX_RX_PKT_PREFIX_LEN 0x0080 /* length is in prefix only */ |
| |
| /** |
| * struct efx_rx_page_state - Page-based rx buffer state |
| * |
| * Inserted at the start of every page allocated for receive buffers. |
| * Used to facilitate sharing dma mappings between recycled rx buffers |
| * and those passed up to the kernel. |
| * |
| * @dma_addr: The dma address of this page. |
| */ |
| struct efx_rx_page_state { |
| dma_addr_t dma_addr; |
| |
| unsigned int __pad[0] ____cacheline_aligned; |
| }; |
| |
| /** |
| * struct efx_rx_queue - An Efx RX queue |
| * @efx: The associated Efx NIC |
| * @core_index: Index of network core RX queue. Will be >= 0 iff this |
| * is associated with a real RX queue. |
| * @buffer: The software buffer ring |
| * @rxd: The hardware descriptor ring |
| * @ptr_mask: The size of the ring minus 1. |
| * @refill_enabled: Enable refill whenever fill level is low |
| * @flush_pending: Set when a RX flush is pending. Has the same lifetime as |
| * @rxq_flush_pending. |
| * @added_count: Number of buffers added to the receive queue. |
| * @notified_count: Number of buffers given to NIC (<= @added_count). |
| * @removed_count: Number of buffers removed from the receive queue. |
| * @scatter_n: Used by NIC specific receive code. |
| * @scatter_len: Used by NIC specific receive code. |
| * @page_ring: The ring to store DMA mapped pages for reuse. |
| * @page_add: Counter to calculate the write pointer for the recycle ring. |
| * @page_remove: Counter to calculate the read pointer for the recycle ring. |
| * @page_recycle_count: The number of pages that have been recycled. |
| * @page_recycle_failed: The number of pages that couldn't be recycled because |
| * the kernel still held a reference to them. |
| * @page_recycle_full: The number of pages that were released because the |
| * recycle ring was full. |
| * @page_ptr_mask: The number of pages in the RX recycle ring minus 1. |
| * @max_fill: RX descriptor maximum fill level (<= ring size) |
| * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill |
| * (<= @max_fill) |
| * @min_fill: RX descriptor minimum non-zero fill level. |
| * This records the minimum fill level observed when a ring |
| * refill was triggered. |
| * @recycle_count: RX buffer recycle counter. |
| * @slow_fill: Timer used to defer efx_nic_generate_fill_event(). |
| */ |
| struct efx_rx_queue { |
| struct efx_nic *efx; |
| int core_index; |
| struct efx_rx_buffer *buffer; |
| struct efx_special_buffer rxd; |
| unsigned int ptr_mask; |
| bool refill_enabled; |
| bool flush_pending; |
| |
| unsigned int added_count; |
| unsigned int notified_count; |
| unsigned int removed_count; |
| unsigned int scatter_n; |
| unsigned int scatter_len; |
| struct page **page_ring; |
| unsigned int page_add; |
| unsigned int page_remove; |
| unsigned int page_recycle_count; |
| unsigned int page_recycle_failed; |
| unsigned int page_recycle_full; |
| unsigned int page_ptr_mask; |
| unsigned int max_fill; |
| unsigned int fast_fill_trigger; |
| unsigned int min_fill; |
| unsigned int min_overfill; |
| unsigned int recycle_count; |
| struct timer_list slow_fill; |
| unsigned int slow_fill_count; |
| }; |
| |
| enum efx_sync_events_state { |
| SYNC_EVENTS_DISABLED = 0, |
| SYNC_EVENTS_QUIESCENT, |
| SYNC_EVENTS_REQUESTED, |
| SYNC_EVENTS_VALID, |
| }; |
| |
| /** |
| * struct efx_channel - An Efx channel |
| * |
| * A channel comprises an event queue, at least one TX queue, at least |
| * one RX queue, and an associated tasklet for processing the event |
| * queue. |
| * |
| * @efx: Associated Efx NIC |
| * @channel: Channel instance number |
| * @type: Channel type definition |
| * @eventq_init: Event queue initialised flag |
| * @enabled: Channel enabled indicator |
| * @irq: IRQ number (MSI and MSI-X only) |
| * @irq_moderation: IRQ moderation value (in hardware ticks) |
| * @napi_dev: Net device used with NAPI |
| * @napi_str: NAPI control structure |
| * @eventq: Event queue buffer |
| * @eventq_mask: Event queue pointer mask |
| * @eventq_read_ptr: Event queue read pointer |
| * @event_test_cpu: Last CPU to handle interrupt or test event for this channel |
| * @irq_count: Number of IRQs since last adaptive moderation decision |
| * @irq_mod_score: IRQ moderation score |
| * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors |
| * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors |
| * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors |
| * @n_rx_mcast_mismatch: Count of unmatched multicast frames |
| * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors |
| * @n_rx_overlength: Count of RX_OVERLENGTH errors |
| * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun |
| * @n_rx_nodesc_trunc: Number of RX packets truncated and then dropped due to |
| * lack of descriptors |
| * @n_rx_merge_events: Number of RX merged completion events |
| * @n_rx_merge_packets: Number of RX packets completed by merged events |
| * @rx_pkt_n_frags: Number of fragments in next packet to be delivered by |
| * __efx_rx_packet(), or zero if there is none |
| * @rx_pkt_index: Ring index of first buffer for next packet to be delivered |
| * by __efx_rx_packet(), if @rx_pkt_n_frags != 0 |
| * @rx_queue: RX queue for this channel |
| * @tx_queue: TX queues for this channel |
| * @sync_events_state: Current state of sync events on this channel |
| * @sync_timestamp_major: Major part of the last ptp sync event |
| * @sync_timestamp_minor: Minor part of the last ptp sync event |
| */ |
| struct efx_channel { |
| struct efx_nic *efx; |
| int channel; |
| const struct efx_channel_type *type; |
| bool eventq_init; |
| bool enabled; |
| int irq; |
| unsigned int irq_moderation; |
| struct net_device *napi_dev; |
| struct napi_struct napi_str; |
| struct efx_special_buffer eventq; |
| unsigned int eventq_mask; |
| unsigned int eventq_read_ptr; |
| int event_test_cpu; |
| |
| unsigned int irq_count; |
| unsigned int irq_mod_score; |
| #ifdef CONFIG_RFS_ACCEL |
| unsigned int rfs_filters_added; |
| #endif |
| |
| unsigned n_rx_tobe_disc; |
| unsigned n_rx_ip_hdr_chksum_err; |
| unsigned n_rx_tcp_udp_chksum_err; |
| unsigned n_rx_mcast_mismatch; |
| unsigned n_rx_frm_trunc; |
| unsigned n_rx_overlength; |
| unsigned n_skbuff_leaks; |
| unsigned int n_rx_nodesc_trunc; |
| unsigned int n_rx_merge_events; |
| unsigned int n_rx_merge_packets; |
| |
| unsigned int rx_pkt_n_frags; |
| unsigned int rx_pkt_index; |
| |
| struct efx_rx_queue rx_queue; |
| struct efx_tx_queue tx_queue[EFX_TXQ_TYPES]; |
| |
| enum efx_sync_events_state sync_events_state; |
| u32 sync_timestamp_major; |
| u32 sync_timestamp_minor; |
| }; |
| |
| /** |
| * struct efx_msi_context - Context for each MSI |
| * @efx: The associated NIC |
| * @index: Index of the channel/IRQ |
| * @name: Name of the channel/IRQ |
| * |
| * Unlike &struct efx_channel, this is never reallocated and is always |
| * safe for the IRQ handler to access. |
| */ |
| struct efx_msi_context { |
| struct efx_nic *efx; |
| unsigned int index; |
| char name[IFNAMSIZ + 6]; |
| }; |
| |
| /** |
| * struct efx_channel_type - distinguishes traffic and extra channels |
| * @handle_no_channel: Handle failure to allocate an extra channel |
| * @pre_probe: Set up extra state prior to initialisation |
| * @post_remove: Tear down extra state after finalisation, if allocated. |
| * May be called on channels that have not been probed. |
| * @get_name: Generate the channel's name (used for its IRQ handler) |
| * @copy: Copy the channel state prior to reallocation. May be %NULL if |
| * reallocation is not supported. |
| * @receive_skb: Handle an skb ready to be passed to netif_receive_skb() |
| * @keep_eventq: Flag for whether event queue should be kept initialised |
| * while the device is stopped |
| */ |
| struct efx_channel_type { |
| void (*handle_no_channel)(struct efx_nic *); |
| int (*pre_probe)(struct efx_channel *); |
| void (*post_remove)(struct efx_channel *); |
| void (*get_name)(struct efx_channel *, char *buf, size_t len); |
| struct efx_channel *(*copy)(const struct efx_channel *); |
| bool (*receive_skb)(struct efx_channel *, struct sk_buff *); |
| bool keep_eventq; |
| }; |
| |
| enum efx_led_mode { |
| EFX_LED_OFF = 0, |
| EFX_LED_ON = 1, |
| EFX_LED_DEFAULT = 2 |
| }; |
| |
| #define STRING_TABLE_LOOKUP(val, member) \ |
| ((val) < member ## _max) ? member ## _names[val] : "(invalid)" |
| |
| extern const char *const efx_loopback_mode_names[]; |
| extern const unsigned int efx_loopback_mode_max; |
| #define LOOPBACK_MODE(efx) \ |
| STRING_TABLE_LOOKUP((efx)->loopback_mode, efx_loopback_mode) |
| |
| extern const char *const efx_reset_type_names[]; |
| extern const unsigned int efx_reset_type_max; |
| #define RESET_TYPE(type) \ |
| STRING_TABLE_LOOKUP(type, efx_reset_type) |
| |
| enum efx_int_mode { |
| /* Be careful if altering to correct macro below */ |
| EFX_INT_MODE_MSIX = 0, |
| EFX_INT_MODE_MSI = 1, |
| EFX_INT_MODE_LEGACY = 2, |
| EFX_INT_MODE_MAX /* Insert any new items before this */ |
| }; |
| #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI) |
| |
| enum nic_state { |
| STATE_UNINIT = 0, /* device being probed/removed or is frozen */ |
| STATE_READY = 1, /* hardware ready and netdev registered */ |
| STATE_DISABLED = 2, /* device disabled due to hardware errors */ |
| STATE_RECOVERY = 3, /* device recovering from PCI error */ |
| }; |
| |
| /* Forward declaration */ |
| struct efx_nic; |
| |
| /* Pseudo bit-mask flow control field */ |
| #define EFX_FC_RX FLOW_CTRL_RX |
| #define EFX_FC_TX FLOW_CTRL_TX |
| #define EFX_FC_AUTO 4 |
| |
| /** |
| * struct efx_link_state - Current state of the link |
| * @up: Link is up |
| * @fd: Link is full-duplex |
| * @fc: Actual flow control flags |
| * @speed: Link speed (Mbps) |
| */ |
| struct efx_link_state { |
| bool up; |
| bool fd; |
| u8 fc; |
| unsigned int speed; |
| }; |
| |
| static inline bool efx_link_state_equal(const struct efx_link_state *left, |
| const struct efx_link_state *right) |
| { |
| return left->up == right->up && left->fd == right->fd && |
| left->fc == right->fc && left->speed == right->speed; |
| } |
| |
| /** |
| * struct efx_phy_operations - Efx PHY operations table |
| * @probe: Probe PHY and initialise efx->mdio.mode_support, efx->mdio.mmds, |
| * efx->loopback_modes. |
| * @init: Initialise PHY |
| * @fini: Shut down PHY |
| * @reconfigure: Reconfigure PHY (e.g. for new link parameters) |
| * @poll: Update @link_state and report whether it changed. |
| * Serialised by the mac_lock. |
| * @get_settings: Get ethtool settings. Serialised by the mac_lock. |
| * @set_settings: Set ethtool settings. Serialised by the mac_lock. |
| * @set_npage_adv: Set abilities advertised in (Extended) Next Page |
| * (only needed where AN bit is set in mmds) |
| * @test_alive: Test that PHY is 'alive' (online) |
| * @test_name: Get the name of a PHY-specific test/result |
| * @run_tests: Run tests and record results as appropriate (offline). |
| * Flags are the ethtool tests flags. |
| */ |
| struct efx_phy_operations { |
| int (*probe) (struct efx_nic *efx); |
| int (*init) (struct efx_nic *efx); |
| void (*fini) (struct efx_nic *efx); |
| void (*remove) (struct efx_nic *efx); |
| int (*reconfigure) (struct efx_nic *efx); |
| bool (*poll) (struct efx_nic *efx); |
| void (*get_settings) (struct efx_nic *efx, |
| struct ethtool_cmd *ecmd); |
| int (*set_settings) (struct efx_nic *efx, |
| struct ethtool_cmd *ecmd); |
| void (*set_npage_adv) (struct efx_nic *efx, u32); |
| int (*test_alive) (struct efx_nic *efx); |
| const char *(*test_name) (struct efx_nic *efx, unsigned int index); |
| int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); |
| int (*get_module_eeprom) (struct efx_nic *efx, |
| struct ethtool_eeprom *ee, |
| u8 *data); |
| int (*get_module_info) (struct efx_nic *efx, |
| struct ethtool_modinfo *modinfo); |
| }; |
| |
| /** |
| * enum efx_phy_mode - PHY operating mode flags |
| * @PHY_MODE_NORMAL: on and should pass traffic |
| * @PHY_MODE_TX_DISABLED: on with TX disabled |
| * @PHY_MODE_LOW_POWER: set to low power through MDIO |
| * @PHY_MODE_OFF: switched off through external control |
| * @PHY_MODE_SPECIAL: on but will not pass traffic |
| */ |
| enum efx_phy_mode { |
| PHY_MODE_NORMAL = 0, |
| PHY_MODE_TX_DISABLED = 1, |
| PHY_MODE_LOW_POWER = 2, |
| PHY_MODE_OFF = 4, |
| PHY_MODE_SPECIAL = 8, |
| }; |
| |
| static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode) |
| { |
| return !!(mode & ~PHY_MODE_TX_DISABLED); |
| } |
| |
| /** |
| * struct efx_hw_stat_desc - Description of a hardware statistic |
| * @name: Name of the statistic as visible through ethtool, or %NULL if |
| * it should not be exposed |
| * @dma_width: Width in bits (0 for non-DMA statistics) |
| * @offset: Offset within stats (ignored for non-DMA statistics) |
| */ |
| struct efx_hw_stat_desc { |
| const char *name; |
| u16 dma_width; |
| u16 offset; |
| }; |
| |
| /* Number of bits used in a multicast filter hash address */ |
| #define EFX_MCAST_HASH_BITS 8 |
| |
| /* Number of (single-bit) entries in a multicast filter hash */ |
| #define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS) |
| |
| /* An Efx multicast filter hash */ |
| union efx_multicast_hash { |
| u8 byte[EFX_MCAST_HASH_ENTRIES / 8]; |
| efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8]; |
| }; |
| |
| struct efx_vf; |
| struct vfdi_status; |
| |
| /** |
| * struct efx_nic - an Efx NIC |
| * @name: Device name (net device name or bus id before net device registered) |
| * @pci_dev: The PCI device |
| * @node: List node for maintaning primary/secondary function lists |
| * @primary: &struct efx_nic instance for the primary function of this |
| * controller. May be the same structure, and may be %NULL if no |
| * primary function is bound. Serialised by rtnl_lock. |
| * @secondary_list: List of &struct efx_nic instances for the secondary PCI |
| * functions of the controller, if this is for the primary function. |
| * Serialised by rtnl_lock. |
| * @type: Controller type attributes |
| * @legacy_irq: IRQ number |
| * @workqueue: Workqueue for port reconfigures and the HW monitor. |
| * Work items do not hold and must not acquire RTNL. |
| * @workqueue_name: Name of workqueue |
| * @reset_work: Scheduled reset workitem |
| * @membase_phys: Memory BAR value as physical address |
| * @membase: Memory BAR value |
| * @interrupt_mode: Interrupt mode |
| * @timer_quantum_ns: Interrupt timer quantum, in nanoseconds |
| * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues |
| * @irq_rx_moderation: IRQ moderation time for RX event queues |
| * @msg_enable: Log message enable flags |
| * @state: Device state number (%STATE_*). Serialised by the rtnl_lock. |
| * @reset_pending: Bitmask for pending resets |
| * @tx_queue: TX DMA queues |
| * @rx_queue: RX DMA queues |
| * @channel: Channels |
| * @msi_context: Context for each MSI |
| * @extra_channel_types: Types of extra (non-traffic) channels that |
| * should be allocated for this NIC |
| * @rxq_entries: Size of receive queues requested by user. |
| * @txq_entries: Size of transmit queues requested by user. |
| * @txq_stop_thresh: TX queue fill level at or above which we stop it. |
| * @txq_wake_thresh: TX queue fill level at or below which we wake it. |
| * @tx_dc_base: Base qword address in SRAM of TX queue descriptor caches |
| * @rx_dc_base: Base qword address in SRAM of RX queue descriptor caches |
| * @sram_lim_qw: Qword address limit of SRAM |
| * @next_buffer_table: First available buffer table id |
| * @n_channels: Number of channels in use |
| * @n_rx_channels: Number of channels used for RX (= number of RX queues) |
| * @n_tx_channels: Number of channels used for TX |
| * @rx_ip_align: RX DMA address offset to have IP header aligned in |
| * in accordance with NET_IP_ALIGN |
| * @rx_dma_len: Current maximum RX DMA length |
| * @rx_buffer_order: Order (log2) of number of pages for each RX buffer |
| * @rx_buffer_truesize: Amortised allocation size of an RX buffer, |
| * for use in sk_buff::truesize |
| * @rx_prefix_size: Size of RX prefix before packet data |
| * @rx_packet_hash_offset: Offset of RX flow hash from start of packet data |
| * (valid only if @rx_prefix_size != 0; always negative) |
| * @rx_packet_len_offset: Offset of RX packet length from start of packet data |
| * (valid only for NICs that set %EFX_RX_PKT_PREFIX_LEN; always negative) |
| * @rx_packet_ts_offset: Offset of timestamp from start of packet data |
| * (valid only if channel->sync_timestamps_enabled; always negative) |
| * @rx_hash_key: Toeplitz hash key for RSS |
| * @rx_indir_table: Indirection table for RSS |
| * @rx_scatter: Scatter mode enabled for receives |
| * @int_error_count: Number of internal errors seen recently |
| * @int_error_expire: Time at which error count will be expired |
| * @irq_soft_enabled: Are IRQs soft-enabled? If not, IRQ handler will |
| * acknowledge but do nothing else. |
| * @irq_status: Interrupt status buffer |
| * @irq_zero_count: Number of legacy IRQs seen with queue flags == 0 |
| * @irq_level: IRQ level/index for IRQs not triggered by an event queue |
| * @selftest_work: Work item for asynchronous self-test |
| * @mtd_list: List of MTDs attached to the NIC |
| * @nic_data: Hardware dependent state |
| * @mcdi: Management-Controller-to-Driver Interface state |
| * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode, |
| * efx_monitor() and efx_reconfigure_port() |
| * @port_enabled: Port enabled indicator. |
| * Serialises efx_stop_all(), efx_start_all(), efx_monitor() and |
| * efx_mac_work() with kernel interfaces. Safe to read under any |
| * one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must |
| * be held to modify it. |
| * @port_initialized: Port initialized? |
| * @net_dev: Operating system network device. Consider holding the rtnl lock |
| * @stats_buffer: DMA buffer for statistics |
| * @phy_type: PHY type |
| * @phy_op: PHY interface |
| * @phy_data: PHY private data (including PHY-specific stats) |
| * @mdio: PHY MDIO interface |
| * @mdio_bus: PHY MDIO bus ID (only used by Siena) |
| * @phy_mode: PHY operating mode. Serialised by @mac_lock. |
| * @link_advertising: Autonegotiation advertising flags |
| * @link_state: Current state of the link |
| * @n_link_state_changes: Number of times the link has changed state |
| * @unicast_filter: Flag for Falcon-arch simple unicast filter. |
| * Protected by @mac_lock. |
| * @multicast_hash: Multicast hash table for Falcon-arch. |
| * Protected by @mac_lock. |
| * @wanted_fc: Wanted flow control flags |
| * @fc_disable: When non-zero flow control is disabled. Typically used to |
| * ensure that network back pressure doesn't delay dma queue flushes. |
| * Serialised by the rtnl lock. |
| * @mac_work: Work item for changing MAC promiscuity and multicast hash |
| * @loopback_mode: Loopback status |
| * @loopback_modes: Supported loopback mode bitmask |
| * @loopback_selftest: Offline self-test private state |
| * @filter_lock: Filter table lock |
| * @filter_state: Architecture-dependent filter table state |
| * @rps_flow_id: Flow IDs of filters allocated for accelerated RFS, |
| * indexed by filter ID |
| * @rps_expire_index: Next index to check for expiry in @rps_flow_id |
| * @active_queues: Count of RX and TX queues that haven't been flushed and drained. |
| * @rxq_flush_pending: Count of number of receive queues that need to be flushed. |
| * Decremented when the efx_flush_rx_queue() is called. |
| * @rxq_flush_outstanding: Count of number of RX flushes started but not yet |
| * completed (either success or failure). Not used when MCDI is used to |
| * flush receive queues. |
| * @flush_wq: wait queue used by efx_nic_flush_queues() to wait for flush completions. |
| * @vf: Array of &struct efx_vf objects. |
| * @vf_count: Number of VFs intended to be enabled. |
| * @vf_init_count: Number of VFs that have been fully initialised. |
| * @vi_scale: log2 number of vnics per VF. |
| * @vf_buftbl_base: The zeroth buffer table index used to back VF queues. |
| * @vfdi_status: Common VFDI status page to be dmad to VF address space. |
| * @local_addr_list: List of local addresses. Protected by %local_lock. |
| * @local_page_list: List of DMA addressable pages used to broadcast |
| * %local_addr_list. Protected by %local_lock. |
| * @local_lock: Mutex protecting %local_addr_list and %local_page_list. |
| * @peer_work: Work item to broadcast peer addresses to VMs. |
| * @ptp_data: PTP state data |
| * @vpd_sn: Serial number read from VPD |
| * @monitor_work: Hardware monitor workitem |
| * @biu_lock: BIU (bus interface unit) lock |
| * @last_irq_cpu: Last CPU to handle a possible test interrupt. This |
| * field is used by efx_test_interrupts() to verify that an |
| * interrupt has occurred. |
| * @stats_lock: Statistics update lock. Must be held when calling |
| * efx_nic_type::{update,start,stop}_stats. |
| * |
| * This is stored in the private area of the &struct net_device. |
| */ |
| struct efx_nic { |
| /* The following fields should be written very rarely */ |
| |
| char name[IFNAMSIZ]; |
| struct list_head node; |
| struct efx_nic *primary; |
| struct list_head secondary_list; |
| struct pci_dev *pci_dev; |
| unsigned int port_num; |
| const struct efx_nic_type *type; |
| int legacy_irq; |
| bool eeh_disabled_legacy_irq; |
| struct workqueue_struct *workqueue; |
| char workqueue_name[16]; |
| struct work_struct reset_work; |
| resource_size_t membase_phys; |
| void __iomem *membase; |
| |
| enum efx_int_mode interrupt_mode; |
| unsigned int timer_quantum_ns; |
| bool irq_rx_adaptive; |
| unsigned int irq_rx_moderation; |
| u32 msg_enable; |
| |
| enum nic_state state; |
| unsigned long reset_pending; |
| |
| struct efx_channel *channel[EFX_MAX_CHANNELS]; |
| struct efx_msi_context msi_context[EFX_MAX_CHANNELS]; |
| const struct efx_channel_type * |
| extra_channel_type[EFX_MAX_EXTRA_CHANNELS]; |
| |
| unsigned rxq_entries; |
| unsigned txq_entries; |
| unsigned int txq_stop_thresh; |
| unsigned int txq_wake_thresh; |
| |
| unsigned tx_dc_base; |
| unsigned rx_dc_base; |
| unsigned sram_lim_qw; |
| unsigned next_buffer_table; |
| |
| unsigned int max_channels; |
| unsigned n_channels; |
| unsigned n_rx_channels; |
| unsigned rss_spread; |
| unsigned tx_channel_offset; |
| unsigned n_tx_channels; |
| unsigned int rx_ip_align; |
| unsigned int rx_dma_len; |
| unsigned int rx_buffer_order; |
| unsigned int rx_buffer_truesize; |
| unsigned int rx_page_buf_step; |
| unsigned int rx_bufs_per_page; |
| unsigned int rx_pages_per_batch; |
| unsigned int rx_prefix_size; |
| int rx_packet_hash_offset; |
| int rx_packet_len_offset; |
| int rx_packet_ts_offset; |
| u8 rx_hash_key[40]; |
| u32 rx_indir_table[128]; |
| bool rx_scatter; |
| |
| unsigned int_error_count; |
| unsigned long int_error_expire; |
| |
| bool irq_soft_enabled; |
| struct efx_buffer irq_status; |
| unsigned irq_zero_count; |
| unsigned irq_level; |
| struct delayed_work selftest_work; |
| |
| #ifdef CONFIG_SFC_MTD |
| struct list_head mtd_list; |
| #endif |
| |
| void *nic_data; |
| struct efx_mcdi_data *mcdi; |
| |
| struct mutex mac_lock; |
| struct work_struct mac_work; |
| bool port_enabled; |
| |
| bool mc_bist_for_other_fn; |
| bool port_initialized; |
| struct net_device *net_dev; |
| |
| struct efx_buffer stats_buffer; |
| u64 rx_nodesc_drops_total; |
| u64 rx_nodesc_drops_while_down; |
| bool rx_nodesc_drops_prev_state; |
| |
| unsigned int phy_type; |
| const struct efx_phy_operations *phy_op; |
| void *phy_data; |
| struct mdio_if_info mdio; |
| unsigned int mdio_bus; |
| enum efx_phy_mode phy_mode; |
| |
| u32 link_advertising; |
| struct efx_link_state link_state; |
| unsigned int n_link_state_changes; |
| |
| bool unicast_filter; |
| union efx_multicast_hash multicast_hash; |
| u8 wanted_fc; |
| unsigned fc_disable; |
| |
| atomic_t rx_reset; |
| enum efx_loopback_mode loopback_mode; |
| u64 loopback_modes; |
| |
| void *loopback_selftest; |
| |
| spinlock_t filter_lock; |
| void *filter_state; |
| #ifdef CONFIG_RFS_ACCEL |
| u32 *rps_flow_id; |
| unsigned int rps_expire_index; |
| #endif |
| |
| atomic_t active_queues; |
| atomic_t rxq_flush_pending; |
| atomic_t rxq_flush_outstanding; |
| wait_queue_head_t flush_wq; |
| |
| #ifdef CONFIG_SFC_SRIOV |
| struct efx_channel *vfdi_channel; |
| struct efx_vf *vf; |
| unsigned vf_count; |
| unsigned vf_init_count; |
| unsigned vi_scale; |
| unsigned vf_buftbl_base; |
| struct efx_buffer vfdi_status; |
| struct list_head local_addr_list; |
| struct list_head local_page_list; |
| struct mutex local_lock; |
| struct work_struct peer_work; |
| #endif |
| |
| struct efx_ptp_data *ptp_data; |
| |
| char *vpd_sn; |
| |
| /* The following fields may be written more often */ |
| |
| struct delayed_work monitor_work ____cacheline_aligned_in_smp; |
| spinlock_t biu_lock; |
| int last_irq_cpu; |
| spinlock_t stats_lock; |
| }; |
| |
| static inline int efx_dev_registered(struct efx_nic *efx) |
| { |
| return efx->net_dev->reg_state == NETREG_REGISTERED; |
| } |
| |
| static inline unsigned int efx_port_num(struct efx_nic *efx) |
| { |
| return efx->port_num; |
| } |
| |
| struct efx_mtd_partition { |
| struct list_head node; |
| struct mtd_info mtd; |
| const char *dev_type_name; |
| const char *type_name; |
| char name[IFNAMSIZ + 20]; |
| }; |
| |
| /** |
| * struct efx_nic_type - Efx device type definition |
| * @mem_map_size: Get memory BAR mapped size |
| * @probe: Probe the controller |
| * @remove: Free resources allocated by probe() |
| * @init: Initialise the controller |
| * @dimension_resources: Dimension controller resources (buffer table, |
| * and VIs once the available interrupt resources are clear) |
| * @fini: Shut down the controller |
| * @monitor: Periodic function for polling link state and hardware monitor |
| * @map_reset_reason: Map ethtool reset reason to a reset method |
| * @map_reset_flags: Map ethtool reset flags to a reset method, if possible |
| * @reset: Reset the controller hardware and possibly the PHY. This will |
| * be called while the controller is uninitialised. |
| * @probe_port: Probe the MAC and PHY |
| * @remove_port: Free resources allocated by probe_port() |
| * @handle_global_event: Handle a "global" event (may be %NULL) |
| * @fini_dmaq: Flush and finalise DMA queues (RX and TX queues) |
| * @prepare_flush: Prepare the hardware for flushing the DMA queues |
| * (for Falcon architecture) |
| * @finish_flush: Clean up after flushing the DMA queues (for Falcon |
| * architecture) |
| * @prepare_flr: Prepare for an FLR |
| * @finish_flr: Clean up after an FLR |
| * @describe_stats: Describe statistics for ethtool |
| * @update_stats: Update statistics not provided by event handling. |
| * Either argument may be %NULL. |
| * @start_stats: Start the regular fetching of statistics |
| * @pull_stats: Pull stats from the NIC and wait until they arrive. |
| * @stop_stats: Stop the regular fetching of statistics |
| * @set_id_led: Set state of identifying LED or revert to automatic function |
| * @push_irq_moderation: Apply interrupt moderation value |
| * @reconfigure_port: Push loopback/power/txdis changes to the MAC and PHY |
| * @prepare_enable_fc_tx: Prepare MAC to enable pause frame TX (may be %NULL) |
| * @reconfigure_mac: Push MAC address, MTU, flow control and filter settings |
| * to the hardware. Serialised by the mac_lock. |
| * @check_mac_fault: Check MAC fault state. True if fault present. |
| * @get_wol: Get WoL configuration from driver state |
| * @set_wol: Push WoL configuration to the NIC |
| * @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume) |
| * @test_chip: Test registers. May use efx_farch_test_registers(), and is |
| * expected to reset the NIC. |
| * @test_nvram: Test validity of NVRAM contents |
| * @mcdi_request: Send an MCDI request with the given header and SDU. |
| * The SDU length may be any value from 0 up to the protocol- |
| * defined maximum, but its buffer will be padded to a multiple |
| * of 4 bytes. |
| * @mcdi_poll_response: Test whether an MCDI response is available. |
| * @mcdi_read_response: Read the MCDI response PDU. The offset will |
| * be a multiple of 4. The length may not be, but the buffer |
| * will be padded so it is safe to round up. |
| * @mcdi_poll_reboot: Test whether the MCDI has rebooted. If so, |
| * return an appropriate error code for aborting any current |
| * request; otherwise return 0. |
| * @irq_enable_master: Enable IRQs on the NIC. Each event queue must |
| * be separately enabled after this. |
| * @irq_test_generate: Generate a test IRQ |
| * @irq_disable_non_ev: Disable non-event IRQs on the NIC. Each event |
| * queue must be separately disabled before this. |
| * @irq_handle_msi: Handle MSI for a channel. The @dev_id argument is |
| * a pointer to the &struct efx_msi_context for the channel. |
| * @irq_handle_legacy: Handle legacy interrupt. The @dev_id argument |
| * is a pointer to the &struct efx_nic. |
| * @tx_probe: Allocate resources for TX queue |
| * @tx_init: Initialise TX queue on the NIC |
| * @tx_remove: Free resources for TX queue |
| * @tx_write: Write TX descriptors and doorbell |
| * @rx_push_rss_config: Write RSS hash key and indirection table to the NIC |
| * @rx_probe: Allocate resources for RX queue |
| * @rx_init: Initialise RX queue on the NIC |
| * @rx_remove: Free resources for RX queue |
| * @rx_write: Write RX descriptors and doorbell |
| * @rx_defer_refill: Generate a refill reminder event |
| * @ev_probe: Allocate resources for event queue |
| * @ev_init: Initialise event queue on the NIC |
| * @ev_fini: Deinitialise event queue on the NIC |
| * @ev_remove: Free resources for event queue |
| * @ev_process: Process events for a queue, up to the given NAPI quota |
| * @ev_read_ack: Acknowledge read events on a queue, rearming its IRQ |
| * @ev_test_generate: Generate a test event |
| * @filter_table_probe: Probe filter capabilities and set up filter software state |
| * @filter_table_restore: Restore filters removed from hardware |
| * @filter_table_remove: Remove filters from hardware and tear down software state |
| * @filter_update_rx_scatter: Update filters after change to rx scatter setting |
| * @filter_insert: add or replace a filter |
| * @filter_remove_safe: remove a filter by ID, carefully |
| * @filter_get_safe: retrieve a filter by ID, carefully |
| * @filter_clear_rx: Remove all RX filters whose priority is less than or |
| * equal to the given priority and is not %EFX_FILTER_PRI_AUTO |
| * @filter_count_rx_used: Get the number of filters in use at a given priority |
| * @filter_get_rx_id_limit: Get maximum value of a filter id, plus 1 |
| * @filter_get_rx_ids: Get list of RX filters at a given priority |
| * @filter_rfs_insert: Add or replace a filter for RFS. This must be |
| * atomic. The hardware change may be asynchronous but should |
| * not be delayed for long. It may fail if this can't be done |
| * atomically. |
| * @filter_rfs_expire_one: Consider expiring a filter inserted for RFS. |
| * This must check whether the specified table entry is used by RFS |
| * and that rps_may_expire_flow() returns true for it. |
| * @mtd_probe: Probe and add MTD partitions associated with this net device, |
| * using efx_mtd_add() |
| * @mtd_rename: Set an MTD partition name using the net device name |
| * @mtd_read: Read from an MTD partition |
| * @mtd_erase: Erase part of an MTD partition |
| * @mtd_write: Write to an MTD partition |
| * @mtd_sync: Wait for write-back to complete on MTD partition. This |
| * also notifies the driver that a writer has finished using this |
| * partition. |
| * @ptp_write_host_time: Send host time to MC as part of sync protocol |
| * @ptp_set_ts_sync_events: Enable or disable sync events for inline RX |
| * timestamping, possibly only temporarily for the purposes of a reset. |
| * @ptp_set_ts_config: Set hardware timestamp configuration. The flags |
| * and tx_type will already have been validated but this operation |
| * must validate and update rx_filter. |
| * @revision: Hardware architecture revision |
| * @txd_ptr_tbl_base: TX descriptor ring base address |
| * @rxd_ptr_tbl_base: RX descriptor ring base address |
| * @buf_tbl_base: Buffer table base address |
| * @evq_ptr_tbl_base: Event queue pointer table base address |
| * @evq_rptr_tbl_base: Event queue read-pointer table base address |
| * @max_dma_mask: Maximum possible DMA mask |
| * @rx_prefix_size: Size of RX prefix before packet data |
| * @rx_hash_offset: Offset of RX flow hash within prefix |
| * @rx_ts_offset: Offset of timestamp within prefix |
| * @rx_buffer_padding: Size of padding at end of RX packet |
| * @can_rx_scatter: NIC is able to scatter packets to multiple buffers |
| * @always_rx_scatter: NIC will always scatter packets to multiple buffers |
| * @max_interrupt_mode: Highest capability interrupt mode supported |
| * from &enum efx_init_mode. |
| * @timer_period_max: Maximum period of interrupt timer (in ticks) |
| * @offload_features: net_device feature flags for protocol offload |
| * features implemented in hardware |
| * @mcdi_max_ver: Maximum MCDI version supported |
| * @hwtstamp_filters: Mask of hardware timestamp filter types supported |
| */ |
| struct efx_nic_type { |
| unsigned int (*mem_map_size)(struct efx_nic *efx); |
| int (*probe)(struct efx_nic *efx); |
| void (*remove)(struct efx_nic *efx); |
| int (*init)(struct efx_nic *efx); |
| int (*dimension_resources)(struct efx_nic *efx); |
| void (*fini)(struct efx_nic *efx); |
| void (*monitor)(struct efx_nic *efx); |
| enum reset_type (*map_reset_reason)(enum reset_type reason); |
| int (*map_reset_flags)(u32 *flags); |
| int (*reset)(struct efx_nic *efx, enum reset_type method); |
| int (*probe_port)(struct efx_nic *efx); |
| void (*remove_port)(struct efx_nic *efx); |
| bool (*handle_global_event)(struct efx_channel *channel, efx_qword_t *); |
| int (*fini_dmaq)(struct efx_nic *efx); |
| void (*prepare_flush)(struct efx_nic *efx); |
| void (*finish_flush)(struct efx_nic *efx); |
| void (*prepare_flr)(struct efx_nic *efx); |
| void (*finish_flr)(struct efx_nic *efx); |
| size_t (*describe_stats)(struct efx_nic *efx, u8 *names); |
| size_t (*update_stats)(struct efx_nic *efx, u64 *full_stats, |
| struct rtnl_link_stats64 *core_stats); |
| void (*start_stats)(struct efx_nic *efx); |
| void (*pull_stats)(struct efx_nic *efx); |
| void (*stop_stats)(struct efx_nic *efx); |
| void (*set_id_led)(struct efx_nic *efx, enum efx_led_mode mode); |
| void (*push_irq_moderation)(struct efx_channel *channel); |
| int (*reconfigure_port)(struct efx_nic *efx); |
| void (*prepare_enable_fc_tx)(struct efx_nic *efx); |
| int (*reconfigure_mac)(struct efx_nic *efx); |
| bool (*check_mac_fault)(struct efx_nic *efx); |
| void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol); |
| int (*set_wol)(struct efx_nic *efx, u32 type); |
| void (*resume_wol)(struct efx_nic *efx); |
| int (*test_chip)(struct efx_nic *efx, struct efx_self_tests *tests); |
| int (*test_nvram)(struct efx_nic *efx); |
| void (*mcdi_request)(struct efx_nic *efx, |
| const efx_dword_t *hdr, size_t hdr_len, |
| const efx_dword_t *sdu, size_t sdu_len); |
| bool (*mcdi_poll_response)(struct efx_nic *efx); |
| void (*mcdi_read_response)(struct efx_nic *efx, efx_dword_t *pdu, |
| size_t pdu_offset, size_t pdu_len); |
| int (*mcdi_poll_reboot)(struct efx_nic *efx); |
| void (*irq_enable_master)(struct efx_nic *efx); |
| void (*irq_test_generate)(struct efx_nic *efx); |
| void (*irq_disable_non_ev)(struct efx_nic *efx); |
| irqreturn_t (*irq_handle_msi)(int irq, void *dev_id); |
| irqreturn_t (*irq_handle_legacy)(int irq, void *dev_id); |
| int (*tx_probe)(struct efx_tx_queue *tx_queue); |
| void (*tx_init)(struct efx_tx_queue *tx_queue); |
| void (*tx_remove)(struct efx_tx_queue *tx_queue); |
| void (*tx_write)(struct efx_tx_queue *tx_queue); |
| void (*rx_push_rss_config)(struct efx_nic *efx); |
| int (*rx_probe)(struct efx_rx_queue *rx_queue); |
| void (*rx_init)(struct efx_rx_queue *rx_queue); |
| void (*rx_remove)(struct efx_rx_queue *rx_queue); |
| void (*rx_write)(struct efx_rx_queue *rx_queue); |
| void (*rx_defer_refill)(struct efx_rx_queue *rx_queue); |
| int (*ev_probe)(struct efx_channel *channel); |
| int (*ev_init)(struct efx_channel *channel); |
| void (*ev_fini)(struct efx_channel *channel); |
| void (*ev_remove)(struct efx_channel *channel); |
| int (*ev_process)(struct efx_channel *channel, int quota); |
| void (*ev_read_ack)(struct efx_channel *channel); |
| void (*ev_test_generate)(struct efx_channel *channel); |
| int (*filter_table_probe)(struct efx_nic *efx); |
| void (*filter_table_restore)(struct efx_nic *efx); |
| void (*filter_table_remove)(struct efx_nic *efx); |
| void (*filter_update_rx_scatter)(struct efx_nic *efx); |
| s32 (*filter_insert)(struct efx_nic *efx, |
| struct efx_filter_spec *spec, bool replace); |
| int (*filter_remove_safe)(struct efx_nic *efx, |
| enum efx_filter_priority priority, |
| u32 filter_id); |
| int (*filter_get_safe)(struct efx_nic *efx, |
| enum efx_filter_priority priority, |
| u32 filter_id, struct efx_filter_spec *); |
| int (*filter_clear_rx)(struct efx_nic *efx, |
| enum efx_filter_priority priority); |
| u32 (*filter_count_rx_used)(struct efx_nic *efx, |
| enum efx_filter_priority priority); |
| u32 (*filter_get_rx_id_limit)(struct efx_nic *efx); |
| s32 (*filter_get_rx_ids)(struct efx_nic *efx, |
| enum efx_filter_priority priority, |
| u32 *buf, u32 size); |
| #ifdef CONFIG_RFS_ACCEL |
| s32 (*filter_rfs_insert)(struct efx_nic *efx, |
| struct efx_filter_spec *spec); |
| bool (*filter_rfs_expire_one)(struct efx_nic *efx, u32 flow_id, |
| unsigned int index); |
| #endif |
| #ifdef CONFIG_SFC_MTD |
| int (*mtd_probe)(struct efx_nic *efx); |
| void (*mtd_rename)(struct efx_mtd_partition *part); |
| int (*mtd_read)(struct mtd_info *mtd, loff_t start, size_t len, |
| size_t *retlen, u8 *buffer); |
| int (*mtd_erase)(struct mtd_info *mtd, loff_t start, size_t len); |
| int (*mtd_write)(struct mtd_info *mtd, loff_t start, size_t len, |
| size_t *retlen, const u8 *buffer); |
| int (*mtd_sync)(struct mtd_info *mtd); |
| #endif |
| void (*ptp_write_host_time)(struct efx_nic *efx, u32 host_time); |
| int (*ptp_set_ts_sync_events)(struct efx_nic *efx, bool en, bool temp); |
| int (*ptp_set_ts_config)(struct efx_nic *efx, |
| struct hwtstamp_config *init); |
| |
| int revision; |
| unsigned int txd_ptr_tbl_base; |
| unsigned int rxd_ptr_tbl_base; |
| unsigned int buf_tbl_base; |
| unsigned int evq_ptr_tbl_base; |
| unsigned int evq_rptr_tbl_base; |
| u64 max_dma_mask; |
| unsigned int rx_prefix_size; |
| unsigned int rx_hash_offset; |
| unsigned int rx_ts_offset; |
| unsigned int rx_buffer_padding; |
| bool can_rx_scatter; |
| bool always_rx_scatter; |
| unsigned int max_interrupt_mode; |
| unsigned int timer_period_max; |
| netdev_features_t offload_features; |
| int mcdi_max_ver; |
| unsigned int max_rx_ip_filters; |
| u32 hwtstamp_filters; |
| }; |
| |
| /************************************************************************** |
| * |
| * Prototypes and inline functions |
| * |
| *************************************************************************/ |
| |
| static inline struct efx_channel * |
| efx_get_channel(struct efx_nic *efx, unsigned index) |
| { |
| EFX_BUG_ON_PARANOID(index >= efx->n_channels); |
| return efx->channel[index]; |
| } |
| |
| /* Iterate over all used channels */ |
| #define efx_for_each_channel(_channel, _efx) \ |
| for (_channel = (_efx)->channel[0]; \ |
| _channel; \ |
| _channel = (_channel->channel + 1 < (_efx)->n_channels) ? \ |
| (_efx)->channel[_channel->channel + 1] : NULL) |
| |
| /* Iterate over all used channels in reverse */ |
| #define efx_for_each_channel_rev(_channel, _efx) \ |
| for (_channel = (_efx)->channel[(_efx)->n_channels - 1]; \ |
| _channel; \ |
| _channel = _channel->channel ? \ |
| (_efx)->channel[_channel->channel - 1] : NULL) |
| |
| static inline struct efx_tx_queue * |
| efx_get_tx_queue(struct efx_nic *efx, unsigned index, unsigned type) |
| { |
| EFX_BUG_ON_PARANOID(index >= efx->n_tx_channels || |
| type >= EFX_TXQ_TYPES); |
| return &efx->channel[efx->tx_channel_offset + index]->tx_queue[type]; |
| } |
| |
| static inline bool efx_channel_has_tx_queues(struct efx_channel *channel) |
| { |
| return channel->channel - channel->efx->tx_channel_offset < |
| channel->efx->n_tx_channels; |
| } |
| |
| static inline struct efx_tx_queue * |
| efx_channel_get_tx_queue(struct efx_channel *channel, unsigned type) |
| { |
| EFX_BUG_ON_PARANOID(!efx_channel_has_tx_queues(channel) || |
| type >= EFX_TXQ_TYPES); |
| return &channel->tx_queue[type]; |
| } |
| |
| static inline bool efx_tx_queue_used(struct efx_tx_queue *tx_queue) |
| { |
| return !(tx_queue->efx->net_dev->num_tc < 2 && |
| tx_queue->queue & EFX_TXQ_TYPE_HIGHPRI); |
| } |
| |
| /* Iterate over all TX queues belonging to a channel */ |
| #define efx_for_each_channel_tx_queue(_tx_queue, _channel) \ |
| if (!efx_channel_has_tx_queues(_channel)) \ |
| ; \ |
| else \ |
| for (_tx_queue = (_channel)->tx_queue; \ |
| _tx_queue < (_channel)->tx_queue + EFX_TXQ_TYPES && \ |
| efx_tx_queue_used(_tx_queue); \ |
| _tx_queue++) |
| |
| /* Iterate over all possible TX queues belonging to a channel */ |
| #define efx_for_each_possible_channel_tx_queue(_tx_queue, _channel) \ |
| if (!efx_channel_has_tx_queues(_channel)) \ |
| ; \ |
| else \ |
| for (_tx_queue = (_channel)->tx_queue; \ |
| _tx_queue < (_channel)->tx_queue + EFX_TXQ_TYPES; \ |
| _tx_queue++) |
| |
| static inline bool efx_channel_has_rx_queue(struct efx_channel *channel) |
| { |
| return channel->rx_queue.core_index >= 0; |
| } |
| |
| static inline struct efx_rx_queue * |
| efx_channel_get_rx_queue(struct efx_channel *channel) |
| { |
| EFX_BUG_ON_PARANOID(!efx_channel_has_rx_queue(channel)); |
| return &channel->rx_queue; |
| } |
| |
| /* Iterate over all RX queues belonging to a channel */ |
| #define efx_for_each_channel_rx_queue(_rx_queue, _channel) \ |
| if (!efx_channel_has_rx_queue(_channel)) \ |
| ; \ |
| else \ |
| for (_rx_queue = &(_channel)->rx_queue; \ |
| _rx_queue; \ |
| _rx_queue = NULL) |
| |
| static inline struct efx_channel * |
| efx_rx_queue_channel(struct efx_rx_queue *rx_queue) |
| { |
| return container_of(rx_queue, struct efx_channel, rx_queue); |
| } |
| |
| static inline int efx_rx_queue_index(struct efx_rx_queue *rx_queue) |
| { |
| return efx_rx_queue_channel(rx_queue)->channel; |
| } |
| |
| /* Returns a pointer to the specified receive buffer in the RX |
| * descriptor queue. |
| */ |
| static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue, |
| unsigned int index) |
| { |
| return &rx_queue->buffer[index]; |
| } |
| |
| /** |
| * EFX_MAX_FRAME_LEN - calculate maximum frame length |
| * |
| * This calculates the maximum frame length that will be used for a |
| * given MTU. The frame length will be equal to the MTU plus a |
| * constant amount of header space and padding. This is the quantity |
| * that the net driver will program into the MAC as the maximum frame |
| * length. |
| * |
| * The 10G MAC requires 8-byte alignment on the frame |
| * length, so we round up to the nearest 8. |
| * |
| * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an |
| * XGMII cycle). If the frame length reaches the maximum value in the |
| * same cycle, the XMAC can miss the IPG altogether. We work around |
| * this by adding a further 16 bytes. |
| */ |
| #define EFX_MAX_FRAME_LEN(mtu) \ |
| ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16) |
| |
| static inline bool efx_xmit_with_hwtstamp(struct sk_buff *skb) |
| { |
| return skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP; |
| } |
| static inline void efx_xmit_hwtstamp_pending(struct sk_buff *skb) |
| { |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
| } |
| |
| #endif /* EFX_NET_DRIVER_H */ |