drivers/net/wireless/rsi/rsi_91x_sdio_ops.c - arm/linux-arm64-legacy - Git at Google

 /**
  * Copyright (c) 2014 Redpine Signals Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  *
  */

 #include <linux/firmware.h>
 #include "rsi_sdio.h"
 #include "rsi_common.h"

 /**
  * rsi_sdio_master_access_msword() - This function sets the AHB master access
  *				     MS word in the SDIO slave registers.
  * @adapter: Pointer to the adapter structure.
  * @ms_word: ms word need to be initialized.
  *
  * Return: status: 0 on success, -1 on failure.
  */
 static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
 					 u16 ms_word)
 {
 	u8 byte;
 	u8 function = 0;
 	int status = 0;

 	byte = (u8)(ms_word & 0x00FF);

 	rsi_dbg(INIT_ZONE,
 		"%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);

 	status = rsi_sdio_write_register(adapter,
 					 function,
 					 SDIO_MASTER_ACCESS_MSBYTE,
 					 &byte);
 	if (status) {
 		rsi_dbg(ERR_ZONE,
 			"%s: fail to access MASTER_ACCESS_MSBYTE\n",
 			__func__);
 		return -1;
 	}

 	byte = (u8)(ms_word >> 8);

 	rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
 	status = rsi_sdio_write_register(adapter,
 					 function,
 					 SDIO_MASTER_ACCESS_LSBYTE,
 					 &byte);
 	return status;
 }

 /**
  * rsi_copy_to_card() - This function includes the actual funtionality of
  *			copying the TA firmware to the card.Basically this
  *			function includes opening the TA file,reading the
  *			TA file and writing their values in blocks of data.
  * @common: Pointer to the driver private structure.
  * @fw: Pointer to the firmware value to be written.
  * @len: length of firmware file.
  * @num_blocks: Number of blocks to be written to the card.
  *
  * Return: 0 on success and -1 on failure.
  */
 static int rsi_copy_to_card(struct rsi_common *common,
 			    const u8 *fw,
 			    u32 len,
 			    u32 num_blocks)
 {
 	struct rsi_hw *adapter = common->priv;
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u32 indx, ii;
 	u32 block_size = dev->tx_blk_size;
 	u32 lsb_address;
 	__le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
 			  TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
 	u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
 			  TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
 	u32 base_address;
 	u16 msb_address;

 	base_address = TA_LOAD_ADDRESS;
 	msb_address = base_address >> 16;

 	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
 		lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
 		if (rsi_sdio_write_register_multiple(adapter,
 						     lsb_address,
 						     (u8 *)(fw + indx),
 						     block_size)) {
 			rsi_dbg(ERR_ZONE,
 				"%s: Unable to load %s blk\n", __func__,
 				FIRMWARE_RSI9113);
 			return -1;
 		}
 		rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
 		base_address += block_size;
 		if ((base_address >> 16) != msb_address) {
 			msb_address += 1;
 			if (rsi_sdio_master_access_msword(adapter,
 							  msb_address)) {
 				rsi_dbg(ERR_ZONE,
 					"%s: Unable to set ms word reg\n",
 					__func__);
 				return -1;
 			}
 		}
 	}

 	if (len % block_size) {
 		lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
 		if (rsi_sdio_write_register_multiple(adapter,
 						     lsb_address,
 						     (u8 *)(fw + indx),
 						     len % block_size)) {
 			rsi_dbg(ERR_ZONE,
 				"%s: Unable to load f/w\n", __func__);
 			return -1;
 		}
 	}
 	rsi_dbg(INIT_ZONE,
 		"%s: Succesfully loaded TA instructions\n", __func__);

 	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Unable to set ms word to common reg\n",
 			__func__);
 		return -1;
 	}

 	for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
 		/* Bringing TA out of reset */
 		if (rsi_sdio_write_register_multiple(adapter,
 						     (address[ii] |
 						     RSI_SD_REQUEST_MASTER),
 						     (u8 *)&data[ii],
 						     4)) {
 			rsi_dbg(ERR_ZONE,
 				"%s: Unable to hold TA threads\n", __func__);
 			return -1;
 		}
 	}

 	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
 	return 0;
 }

 /**
  * rsi_load_ta_instructions() - This function includes the actual funtionality
  *				of loading the TA firmware.This function also
  *				includes opening the TA file,reading the TA
  *				file and writing their value in blocks of data.
  * @common: Pointer to the driver private structure.
  *
  * Return: status: 0 on success, -1 on failure.
  */
 static int rsi_load_ta_instructions(struct rsi_common *common)
 {
 	struct rsi_hw *adapter = common->priv;
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u32 len;
 	u32 num_blocks;
 	const u8 *fw;
 	const struct firmware *fw_entry = NULL;
 	u32 block_size = dev->tx_blk_size;
 	int status = 0;
 	u32 base_address;
 	u16 msb_address;

 	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Unable to set ms word to common reg\n",
 			__func__);
 		return -1;
 	}
 	base_address = TA_LOAD_ADDRESS;
 	msb_address = (base_address >> 16);

 	if (rsi_sdio_master_access_msword(adapter, msb_address)) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Unable to set ms word reg\n", __func__);
 		return -1;
 	}

 	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
 			__func__, FIRMWARE_RSI9113);
 		return status;
 	}

 	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
 	len = fw_entry->size;

 	if (len % 4)
 		len += (4 - (len % 4));

 	num_blocks = (len / block_size);

 	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
 	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);

 	status = rsi_copy_to_card(common, fw, len, num_blocks);
 	release_firmware(fw_entry);
 	return status;
 }

 /**
  * rsi_process_pkt() - This Function reads rx_blocks register and figures out
  *		       the size of the rx pkt.
  * @common: Pointer to the driver private structure.
  *
  * Return: 0 on success, -1 on failure.
  */
 static int rsi_process_pkt(struct rsi_common *common)
 {
 	struct rsi_hw *adapter = common->priv;
 	u8 num_blks = 0;
 	u32 rcv_pkt_len = 0;
 	int status = 0;

 	status = rsi_sdio_read_register(adapter,
 					SDIO_RX_NUM_BLOCKS_REG,
 					&num_blks);

 	if (status) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Failed to read pkt length from the card:\n",
 			__func__);
 		return status;
 	}
 	rcv_pkt_len = (num_blks * 256);

 	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
 	if (!common->rx_data_pkt) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
 			__func__);
 		return -ENOMEM;
 	}

 	status = rsi_sdio_host_intf_read_pkt(adapter,
 					     common->rx_data_pkt,
 					     rcv_pkt_len);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
 			__func__);
 		goto fail;
 	}

 	status = rsi_read_pkt(common, rcv_pkt_len);

 fail:
 	kfree(common->rx_data_pkt);
 	return status;
 }

 /**
  * rsi_init_sdio_slave_regs() - This function does the actual initialization
  *				of SDBUS slave registers.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: status: 0 on success, -1 on failure.
  */
 int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
 {
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u8 function = 0;
 	u8 byte;
 	int status = 0;

 	if (dev->next_read_delay) {
 		byte = dev->next_read_delay;
 		status = rsi_sdio_write_register(adapter,
 						 function,
 						 SDIO_NXT_RD_DELAY2,
 						 &byte);
 		if (status) {
 			rsi_dbg(ERR_ZONE,
 				"%s: Failed to write SDIO_NXT_RD_DELAY2\n",
 				__func__);
 			return -1;
 		}
 	}

 	if (dev->sdio_high_speed_enable) {
 		rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);
 		byte = 0x3;

 		status = rsi_sdio_write_register(adapter,
 						 function,
 						 SDIO_REG_HIGH_SPEED,
 						 &byte);
 		if (status) {
 			rsi_dbg(ERR_ZONE,
 				"%s: Failed to enable SDIO high speed\n",
 				__func__);
 			return -1;
 		}
 	}

 	/* This tells SDIO FIFO when to start read to host */
 	rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__);
 	byte = 0x24;

 	status = rsi_sdio_write_register(adapter,
 					 function,
 					 SDIO_READ_START_LVL,
 					 &byte);
 	if (status) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Failed to write SDIO_READ_START_LVL\n", __func__);
 		return -1;
 	}

 	rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__);
 	byte = (128 - 32);

 	status = rsi_sdio_write_register(adapter,
 					 function,
 					 SDIO_READ_FIFO_CTL,
 					 &byte);
 	if (status) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__);
 		return -1;
 	}

 	byte = 32;
 	status = rsi_sdio_write_register(adapter,
 					 function,
 					 SDIO_WRITE_FIFO_CTL,
 					 &byte);
 	if (status) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__);
 		return -1;
 	}

 	return 0;
 }

 /**
  * rsi_interrupt_handler() - This function read and process SDIO interrupts.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: None.
  */
 void rsi_interrupt_handler(struct rsi_hw *adapter)
 {
 	struct rsi_common *common = adapter->priv;
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	int status;
 	enum sdio_interrupt_type isr_type;
 	u8 isr_status = 0;
 	u8 fw_status = 0;

 	dev->rx_info.sdio_int_counter++;

 	do {
 		mutex_lock(&common->tx_rxlock);
 		status = rsi_sdio_read_register(common->priv,
 						RSI_FN1_INT_REGISTER,
 						&isr_status);
 		if (status) {
 			rsi_dbg(ERR_ZONE,
 				"%s: Failed to Read Intr Status Register\n",
 				__func__);
 			mutex_unlock(&common->tx_rxlock);
 			return;
 		}

 		if (isr_status == 0) {
 			rsi_set_event(&common->tx_thread.event);
 			dev->rx_info.sdio_intr_status_zero++;
 			mutex_unlock(&common->tx_rxlock);
 			return;
 		}

 		rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
 			__func__, isr_status, (1 << MSDU_PKT_PENDING),
 			(1 << FW_ASSERT_IND));

 		do {
 			RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);

 			switch (isr_type) {
 			case BUFFER_AVAILABLE:
 				dev->rx_info.watch_bufferfull_count = 0;
 				dev->rx_info.buffer_full = false;
 				dev->rx_info.mgmt_buffer_full = false;
 				rsi_sdio_ack_intr(common->priv,
 						  (1 << PKT_BUFF_AVAILABLE));
 				rsi_set_event((&common->tx_thread.event));
 				rsi_dbg(ISR_ZONE,
 					"%s: ==> BUFFER_AVILABLE <==\n",
 					__func__);
 				dev->rx_info.buf_avilable_counter++;
 				break;

 			case FIRMWARE_ASSERT_IND:
 				rsi_dbg(ERR_ZONE,
 					"%s: ==> FIRMWARE Assert <==\n",
 					__func__);
 				status = rsi_sdio_read_register(common->priv,
 							SDIO_FW_STATUS_REG,
 							&fw_status);
 				if (status) {
 					rsi_dbg(ERR_ZONE,
 						"%s: Failed to read f/w reg\n",
 						__func__);
 				} else {
 					rsi_dbg(ERR_ZONE,
 						"%s: Firmware Status is 0x%x\n",
 						__func__ , fw_status);
 					rsi_sdio_ack_intr(common->priv,
 							  (1 << FW_ASSERT_IND));
 				}

 				common->fsm_state = FSM_CARD_NOT_READY;
 				break;

 			case MSDU_PACKET_PENDING:
 				rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
 				dev->rx_info.total_sdio_msdu_pending_intr++;

 				status = rsi_process_pkt(common);
 				if (status) {
 					rsi_dbg(ERR_ZONE,
 						"%s: Failed to read pkt\n",
 						__func__);
 					mutex_unlock(&common->tx_rxlock);
 					return;
 				}
 				break;
 			default:
 				rsi_sdio_ack_intr(common->priv, isr_status);
 				dev->rx_info.total_sdio_unknown_intr++;
 				isr_status = 0;
 				rsi_dbg(ISR_ZONE,
 					"Unknown Interrupt %x\n",
 					isr_status);
 				break;
 			}
 			isr_status ^= BIT(isr_type - 1);
 		} while (isr_status);
 		mutex_unlock(&common->tx_rxlock);
 	} while (1);
 }

 /**
  * rsi_device_init() - This Function Initializes The HAL.
  * @common: Pointer to the driver private structure.
  *
  * Return: 0 on success, -1 on failure.
  */
 int rsi_sdio_device_init(struct rsi_common *common)
 {
 	if (rsi_load_ta_instructions(common))
 		return -1;

 	if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
 		rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
 			__func__);
 		return -1;
 	}
 	rsi_dbg(INIT_ZONE,
 		"%s: Setting ms word to 0x41050000\n", __func__);

 	return 0;
 }

 /**
  * rsi_sdio_read_buffer_status_register() - This function is used to the read
  *					    buffer status register and set
  *					    relevant fields in
  *					    rsi_91x_sdiodev struct.
  * @adapter: Pointer to the driver hw structure.
  * @q_num: The Q number whose status is to be found.
  *
  * Return: status: -1 on failure or else queue full/stop is indicated.
  */
 int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
 {
 	struct rsi_common *common = adapter->priv;
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u8 buf_status = 0;
 	int status = 0;

 	status = rsi_sdio_read_register(common->priv,
 					RSI_DEVICE_BUFFER_STATUS_REGISTER,
 					&buf_status);

 	if (status) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Failed to read status register\n", __func__);
 		return -1;
 	}

 	if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) {
 		if (!dev->rx_info.mgmt_buffer_full)
 			dev->rx_info.mgmt_buf_full_counter++;
 		dev->rx_info.mgmt_buffer_full = true;
 	} else {
 		dev->rx_info.mgmt_buffer_full = false;
 	}

 	if (buf_status & (BIT(PKT_BUFF_FULL))) {
 		if (!dev->rx_info.buffer_full)
 			dev->rx_info.buf_full_counter++;
 		dev->rx_info.buffer_full = true;
 	} else {
 		dev->rx_info.buffer_full = false;
 	}

 	if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) {
 		if (!dev->rx_info.semi_buffer_full)
 			dev->rx_info.buf_semi_full_counter++;
 		dev->rx_info.semi_buffer_full = true;
 	} else {
 		dev->rx_info.semi_buffer_full = false;
 	}

 	if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
 		return QUEUE_FULL;

 	if (dev->rx_info.buffer_full)
 		return QUEUE_FULL;

 	return QUEUE_NOT_FULL;
 }

 /**
  * rsi_sdio_determine_event_timeout() - This Function determines the event
  *					timeout duration.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: timeout duration is returned.
  */
 int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter)
 {
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;

 	/* Once buffer full is seen, event timeout to occur every 2 msecs */
 	if (dev->rx_info.buffer_full)
 		return 2;

 	return EVENT_WAIT_FOREVER;
 }
	/**
	* Copyright (c) 2014 Redpine Signals Inc.
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*
	*/

	#include <linux/firmware.h>
	#include "rsi_sdio.h"
	#include "rsi_common.h"

	/**
	* rsi_sdio_master_access_msword() - This function sets the AHB master access
	* MS word in the SDIO slave registers.
	* @adapter: Pointer to the adapter structure.
	* @ms_word: ms word need to be initialized.
	*
	* Return: status: 0 on success, -1 on failure.
	*/
	static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
	u16 ms_word)
	{
	u8 byte;
	u8 function = 0;
	int status = 0;

	byte = (u8)(ms_word & 0x00FF);

	rsi_dbg(INIT_ZONE,
	"%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);

	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_MASTER_ACCESS_MSBYTE,
	&byte);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: fail to access MASTER_ACCESS_MSBYTE\n",
	__func__);
	return -1;
	}

	byte = (u8)(ms_word >> 8);

	rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_MASTER_ACCESS_LSBYTE,
	&byte);
	return status;
	}

	/**
	* rsi_copy_to_card() - This function includes the actual funtionality of
	* copying the TA firmware to the card.Basically this
	* function includes opening the TA file,reading the
	* TA file and writing their values in blocks of data.
	* @common: Pointer to the driver private structure.
	* @fw: Pointer to the firmware value to be written.
	* @len: length of firmware file.
	* @num_blocks: Number of blocks to be written to the card.
	*
	* Return: 0 on success and -1 on failure.
	*/
	static int rsi_copy_to_card(struct rsi_common *common,
	const u8 *fw,
	u32 len,
	u32 num_blocks)
	{
	struct rsi_hw *adapter = common->priv;
	struct rsi_91x_sdiodev *dev =
	(struct rsi_91x_sdiodev *)adapter->rsi_dev;
	u32 indx, ii;
	u32 block_size = dev->tx_blk_size;
	u32 lsb_address;
	__le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
	TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
	u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
	TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
	u32 base_address;
	u16 msb_address;

	base_address = TA_LOAD_ADDRESS;
	msb_address = base_address >> 16;

	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
	lsb_address = ((u16) base_address \| RSI_SD_REQUEST_MASTER);
	if (rsi_sdio_write_register_multiple(adapter,
	lsb_address,
	(u8 *)(fw + indx),
	block_size)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to load %s blk\n", __func__,
	FIRMWARE_RSI9113);
	return -1;
	}
	rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
	base_address += block_size;
	if ((base_address >> 16) != msb_address) {
	msb_address += 1;
	if (rsi_sdio_master_access_msword(adapter,
	msb_address)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to set ms word reg\n",
	__func__);
	return -1;
	}
	}
	}

	if (len % block_size) {
	lsb_address = ((u16) base_address \| RSI_SD_REQUEST_MASTER);
	if (rsi_sdio_write_register_multiple(adapter,
	lsb_address,
	(u8 *)(fw + indx),
	len % block_size)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to load f/w\n", __func__);
	return -1;
	}
	}
	rsi_dbg(INIT_ZONE,
	"%s: Succesfully loaded TA instructions\n", __func__);

	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to set ms word to common reg\n",
	__func__);
	return -1;
	}

	for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
	/* Bringing TA out of reset */
	if (rsi_sdio_write_register_multiple(adapter,
	(address[ii] \|
	RSI_SD_REQUEST_MASTER),
	(u8 *)&data[ii],
	4)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to hold TA threads\n", __func__);
	return -1;
	}
	}

	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
	return 0;
	}

	/**
	* rsi_load_ta_instructions() - This function includes the actual funtionality
	* of loading the TA firmware.This function also
	* includes opening the TA file,reading the TA
	* file and writing their value in blocks of data.
	* @common: Pointer to the driver private structure.
	*
	* Return: status: 0 on success, -1 on failure.
	*/
	static int rsi_load_ta_instructions(struct rsi_common *common)
	{
	struct rsi_hw *adapter = common->priv;
	struct rsi_91x_sdiodev *dev =
	(struct rsi_91x_sdiodev *)adapter->rsi_dev;
	u32 len;
	u32 num_blocks;
	const u8 *fw;
	const struct firmware *fw_entry = NULL;
	u32 block_size = dev->tx_blk_size;
	int status = 0;
	u32 base_address;
	u16 msb_address;

	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to set ms word to common reg\n",
	__func__);
	return -1;
	}
	base_address = TA_LOAD_ADDRESS;
	msb_address = (base_address >> 16);

	if (rsi_sdio_master_access_msword(adapter, msb_address)) {
	rsi_dbg(ERR_ZONE,
	"%s: Unable to set ms word reg\n", __func__);
	return -1;
	}

	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
	if (status < 0) {
	rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
	__func__, FIRMWARE_RSI9113);
	return status;
	}

	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
	len = fw_entry->size;

	if (len % 4)
	len += (4 - (len % 4));

	num_blocks = (len / block_size);

	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);

	status = rsi_copy_to_card(common, fw, len, num_blocks);
	release_firmware(fw_entry);
	return status;
	}

	/**
	* rsi_process_pkt() - This Function reads rx_blocks register and figures out
	* the size of the rx pkt.
	* @common: Pointer to the driver private structure.
	*
	* Return: 0 on success, -1 on failure.
	*/
	static int rsi_process_pkt(struct rsi_common *common)
	{
	struct rsi_hw *adapter = common->priv;
	u8 num_blks = 0;
	u32 rcv_pkt_len = 0;
	int status = 0;

	status = rsi_sdio_read_register(adapter,
	SDIO_RX_NUM_BLOCKS_REG,
	&num_blks);

	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to read pkt length from the card:\n",
	__func__);
	return status;
	}
	rcv_pkt_len = (num_blks * 256);

	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
	if (!common->rx_data_pkt) {
	rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
	__func__);
	return -ENOMEM;
	}

	status = rsi_sdio_host_intf_read_pkt(adapter,
	common->rx_data_pkt,
	rcv_pkt_len);
	if (status) {
	rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
	__func__);
	goto fail;
	}

	status = rsi_read_pkt(common, rcv_pkt_len);

	fail:
	kfree(common->rx_data_pkt);
	return status;
	}

	/**
	* rsi_init_sdio_slave_regs() - This function does the actual initialization
	* of SDBUS slave registers.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: status: 0 on success, -1 on failure.
	*/
	int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
	{
	struct rsi_91x_sdiodev *dev =
	(struct rsi_91x_sdiodev *)adapter->rsi_dev;
	u8 function = 0;
	u8 byte;
	int status = 0;

	if (dev->next_read_delay) {
	byte = dev->next_read_delay;
	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_NXT_RD_DELAY2,
	&byte);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to write SDIO_NXT_RD_DELAY2\n",
	__func__);
	return -1;
	}
	}

	if (dev->sdio_high_speed_enable) {
	rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);
	byte = 0x3;

	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_REG_HIGH_SPEED,
	&byte);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to enable SDIO high speed\n",
	__func__);
	return -1;
	}
	}

	/* This tells SDIO FIFO when to start read to host */
	rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__);
	byte = 0x24;

	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_READ_START_LVL,
	&byte);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to write SDIO_READ_START_LVL\n", __func__);
	return -1;
	}

	rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__);
	byte = (128 - 32);

	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_READ_FIFO_CTL,
	&byte);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__);
	return -1;
	}

	byte = 32;
	status = rsi_sdio_write_register(adapter,
	function,
	SDIO_WRITE_FIFO_CTL,
	&byte);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__);
	return -1;
	}

	return 0;
	}

	/**
	* rsi_interrupt_handler() - This function read and process SDIO interrupts.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: None.
	*/
	void rsi_interrupt_handler(struct rsi_hw *adapter)
	{
	struct rsi_common *common = adapter->priv;
	struct rsi_91x_sdiodev *dev =
	(struct rsi_91x_sdiodev *)adapter->rsi_dev;
	int status;
	enum sdio_interrupt_type isr_type;
	u8 isr_status = 0;
	u8 fw_status = 0;

	dev->rx_info.sdio_int_counter++;

	do {
	mutex_lock(&common->tx_rxlock);
	status = rsi_sdio_read_register(common->priv,
	RSI_FN1_INT_REGISTER,
	&isr_status);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to Read Intr Status Register\n",
	__func__);
	mutex_unlock(&common->tx_rxlock);
	return;
	}

	if (isr_status == 0) {
	rsi_set_event(&common->tx_thread.event);
	dev->rx_info.sdio_intr_status_zero++;
	mutex_unlock(&common->tx_rxlock);
	return;
	}

	rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
	__func__, isr_status, (1 << MSDU_PKT_PENDING),
	(1 << FW_ASSERT_IND));

	do {
	RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);

	switch (isr_type) {
	case BUFFER_AVAILABLE:
	dev->rx_info.watch_bufferfull_count = 0;
	dev->rx_info.buffer_full = false;
	dev->rx_info.mgmt_buffer_full = false;
	rsi_sdio_ack_intr(common->priv,
	(1 << PKT_BUFF_AVAILABLE));
	rsi_set_event((&common->tx_thread.event));
	rsi_dbg(ISR_ZONE,
	"%s: ==> BUFFER_AVILABLE <==\n",
	__func__);
	dev->rx_info.buf_avilable_counter++;
	break;

	case FIRMWARE_ASSERT_IND:
	rsi_dbg(ERR_ZONE,
	"%s: ==> FIRMWARE Assert <==\n",
	__func__);
	status = rsi_sdio_read_register(common->priv,
	SDIO_FW_STATUS_REG,
	&fw_status);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to read f/w reg\n",
	__func__);
	} else {
	rsi_dbg(ERR_ZONE,
	"%s: Firmware Status is 0x%x\n",
	__func__ , fw_status);
	rsi_sdio_ack_intr(common->priv,
	(1 << FW_ASSERT_IND));
	}

	common->fsm_state = FSM_CARD_NOT_READY;
	break;

	case MSDU_PACKET_PENDING:
	rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
	dev->rx_info.total_sdio_msdu_pending_intr++;

	status = rsi_process_pkt(common);
	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to read pkt\n",
	__func__);
	mutex_unlock(&common->tx_rxlock);
	return;
	}
	break;
	default:
	rsi_sdio_ack_intr(common->priv, isr_status);
	dev->rx_info.total_sdio_unknown_intr++;
	isr_status = 0;
	rsi_dbg(ISR_ZONE,
	"Unknown Interrupt %x\n",
	isr_status);
	break;
	}
	isr_status ^= BIT(isr_type - 1);
	} while (isr_status);
	mutex_unlock(&common->tx_rxlock);
	} while (1);
	}

	/**
	* rsi_device_init() - This Function Initializes The HAL.
	* @common: Pointer to the driver private structure.
	*
	* Return: 0 on success, -1 on failure.
	*/
	int rsi_sdio_device_init(struct rsi_common *common)
	{
	if (rsi_load_ta_instructions(common))
	return -1;

	if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
	rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
	__func__);
	return -1;
	}
	rsi_dbg(INIT_ZONE,
	"%s: Setting ms word to 0x41050000\n", __func__);

	return 0;
	}

	/**
	* rsi_sdio_read_buffer_status_register() - This function is used to the read
	* buffer status register and set
	* relevant fields in
	* rsi_91x_sdiodev struct.
	* @adapter: Pointer to the driver hw structure.
	* @q_num: The Q number whose status is to be found.
	*
	* Return: status: -1 on failure or else queue full/stop is indicated.
	*/
	int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
	{
	struct rsi_common *common = adapter->priv;
	struct rsi_91x_sdiodev *dev =
	(struct rsi_91x_sdiodev *)adapter->rsi_dev;
	u8 buf_status = 0;
	int status = 0;

	status = rsi_sdio_read_register(common->priv,
	RSI_DEVICE_BUFFER_STATUS_REGISTER,
	&buf_status);

	if (status) {
	rsi_dbg(ERR_ZONE,
	"%s: Failed to read status register\n", __func__);
	return -1;
	}

	if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) {
	if (!dev->rx_info.mgmt_buffer_full)
	dev->rx_info.mgmt_buf_full_counter++;
	dev->rx_info.mgmt_buffer_full = true;
	} else {
	dev->rx_info.mgmt_buffer_full = false;
	}

	if (buf_status & (BIT(PKT_BUFF_FULL))) {
	if (!dev->rx_info.buffer_full)
	dev->rx_info.buf_full_counter++;
	dev->rx_info.buffer_full = true;
	} else {
	dev->rx_info.buffer_full = false;
	}

	if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) {
	if (!dev->rx_info.semi_buffer_full)
	dev->rx_info.buf_semi_full_counter++;
	dev->rx_info.semi_buffer_full = true;
	} else {
	dev->rx_info.semi_buffer_full = false;
	}

	if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
	return QUEUE_FULL;

	if (dev->rx_info.buffer_full)
	return QUEUE_FULL;

	return QUEUE_NOT_FULL;
	}

	/**
	* rsi_sdio_determine_event_timeout() - This Function determines the event
	* timeout duration.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: timeout duration is returned.
	*/
	int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter)
	{
	struct rsi_91x_sdiodev *dev =
	(struct rsi_91x_sdiodev *)adapter->rsi_dev;

	/* Once buffer full is seen, event timeout to occur every 2 msecs */
	if (dev->rx_info.buffer_full)
	return 2;

	return EVENT_WAIT_FOREVER;
	}