| |
| /* |
| * This file is part of wlcore |
| * |
| * Copyright (C) 2008-2010 Nokia Corporation |
| * Copyright (C) 2011-2013 Texas Instruments Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/wl12xx.h> |
| #include <linux/interrupt.h> |
| |
| #include "wlcore.h" |
| #include "debug.h" |
| #include "wl12xx_80211.h" |
| #include "io.h" |
| #include "tx.h" |
| #include "ps.h" |
| #include "init.h" |
| #include "debugfs.h" |
| #include "testmode.h" |
| #include "scan.h" |
| #include "hw_ops.h" |
| #include "sysfs.h" |
| |
| #define WL1271_BOOT_RETRIES 3 |
| |
| static char *fwlog_param; |
| static int fwlog_mem_blocks = -1; |
| static int bug_on_recovery = -1; |
| static int no_recovery = -1; |
| |
| static void __wl1271_op_remove_interface(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| bool reset_tx_queues); |
| static void wlcore_op_stop_locked(struct wl1271 *wl); |
| static void wl1271_free_ap_keys(struct wl1271 *wl, struct wl12xx_vif *wlvif); |
| |
| static int wl12xx_set_authorized(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int ret; |
| |
| if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS)) |
| return -EINVAL; |
| |
| if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) |
| return 0; |
| |
| if (test_and_set_bit(WLVIF_FLAG_STA_STATE_SENT, &wlvif->flags)) |
| return 0; |
| |
| ret = wl12xx_cmd_set_peer_state(wl, wlvif, wlvif->sta.hlid); |
| if (ret < 0) |
| return ret; |
| |
| wl1271_info("Association completed."); |
| return 0; |
| } |
| |
| static void wl1271_reg_notify(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct ieee80211_supported_band *band; |
| struct ieee80211_channel *ch; |
| int i; |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct wl1271 *wl = hw->priv; |
| |
| band = wiphy->bands[IEEE80211_BAND_5GHZ]; |
| for (i = 0; i < band->n_channels; i++) { |
| ch = &band->channels[i]; |
| if (ch->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| if (ch->flags & IEEE80211_CHAN_RADAR) |
| ch->flags |= IEEE80211_CHAN_NO_IR; |
| |
| } |
| |
| wlcore_regdomain_config(wl); |
| } |
| |
| static int wl1271_set_rx_streaming(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| bool enable) |
| { |
| int ret = 0; |
| |
| /* we should hold wl->mutex */ |
| ret = wl1271_acx_ps_rx_streaming(wl, wlvif, enable); |
| if (ret < 0) |
| goto out; |
| |
| if (enable) |
| set_bit(WLVIF_FLAG_RX_STREAMING_STARTED, &wlvif->flags); |
| else |
| clear_bit(WLVIF_FLAG_RX_STREAMING_STARTED, &wlvif->flags); |
| out: |
| return ret; |
| } |
| |
| /* |
| * this function is being called when the rx_streaming interval |
| * has beed changed or rx_streaming should be disabled |
| */ |
| int wl1271_recalc_rx_streaming(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int ret = 0; |
| int period = wl->conf.rx_streaming.interval; |
| |
| /* don't reconfigure if rx_streaming is disabled */ |
| if (!test_bit(WLVIF_FLAG_RX_STREAMING_STARTED, &wlvif->flags)) |
| goto out; |
| |
| /* reconfigure/disable according to new streaming_period */ |
| if (period && |
| test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) && |
| (wl->conf.rx_streaming.always || |
| test_bit(WL1271_FLAG_SOFT_GEMINI, &wl->flags))) |
| ret = wl1271_set_rx_streaming(wl, wlvif, true); |
| else { |
| ret = wl1271_set_rx_streaming(wl, wlvif, false); |
| /* don't cancel_work_sync since we might deadlock */ |
| del_timer_sync(&wlvif->rx_streaming_timer); |
| } |
| out: |
| return ret; |
| } |
| |
| static void wl1271_rx_streaming_enable_work(struct work_struct *work) |
| { |
| int ret; |
| struct wl12xx_vif *wlvif = container_of(work, struct wl12xx_vif, |
| rx_streaming_enable_work); |
| struct wl1271 *wl = wlvif->wl; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (test_bit(WLVIF_FLAG_RX_STREAMING_STARTED, &wlvif->flags) || |
| !test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) || |
| (!wl->conf.rx_streaming.always && |
| !test_bit(WL1271_FLAG_SOFT_GEMINI, &wl->flags))) |
| goto out; |
| |
| if (!wl->conf.rx_streaming.interval) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_set_rx_streaming(wl, wlvif, true); |
| if (ret < 0) |
| goto out_sleep; |
| |
| /* stop it after some time of inactivity */ |
| mod_timer(&wlvif->rx_streaming_timer, |
| jiffies + msecs_to_jiffies(wl->conf.rx_streaming.duration)); |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wl1271_rx_streaming_disable_work(struct work_struct *work) |
| { |
| int ret; |
| struct wl12xx_vif *wlvif = container_of(work, struct wl12xx_vif, |
| rx_streaming_disable_work); |
| struct wl1271 *wl = wlvif->wl; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (!test_bit(WLVIF_FLAG_RX_STREAMING_STARTED, &wlvif->flags)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_set_rx_streaming(wl, wlvif, false); |
| if (ret) |
| goto out_sleep; |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wl1271_rx_streaming_timer(unsigned long data) |
| { |
| struct wl12xx_vif *wlvif = (struct wl12xx_vif *)data; |
| struct wl1271 *wl = wlvif->wl; |
| ieee80211_queue_work(wl->hw, &wlvif->rx_streaming_disable_work); |
| } |
| |
| /* wl->mutex must be taken */ |
| void wl12xx_rearm_tx_watchdog_locked(struct wl1271 *wl) |
| { |
| /* if the watchdog is not armed, don't do anything */ |
| if (wl->tx_allocated_blocks == 0) |
| return; |
| |
| cancel_delayed_work(&wl->tx_watchdog_work); |
| ieee80211_queue_delayed_work(wl->hw, &wl->tx_watchdog_work, |
| msecs_to_jiffies(wl->conf.tx.tx_watchdog_timeout)); |
| } |
| |
| static void wl12xx_tx_watchdog_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork; |
| struct wl1271 *wl; |
| |
| dwork = container_of(work, struct delayed_work, work); |
| wl = container_of(dwork, struct wl1271, tx_watchdog_work); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| /* Tx went out in the meantime - everything is ok */ |
| if (unlikely(wl->tx_allocated_blocks == 0)) |
| goto out; |
| |
| /* |
| * if a ROC is in progress, we might not have any Tx for a long |
| * time (e.g. pending Tx on the non-ROC channels) |
| */ |
| if (find_first_bit(wl->roc_map, WL12XX_MAX_ROLES) < WL12XX_MAX_ROLES) { |
| wl1271_debug(DEBUG_TX, "No Tx (in FW) for %d ms due to ROC", |
| wl->conf.tx.tx_watchdog_timeout); |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| goto out; |
| } |
| |
| /* |
| * if a scan is in progress, we might not have any Tx for a long |
| * time |
| */ |
| if (wl->scan.state != WL1271_SCAN_STATE_IDLE) { |
| wl1271_debug(DEBUG_TX, "No Tx (in FW) for %d ms due to scan", |
| wl->conf.tx.tx_watchdog_timeout); |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| goto out; |
| } |
| |
| /* |
| * AP might cache a frame for a long time for a sleeping station, |
| * so rearm the timer if there's an AP interface with stations. If |
| * Tx is genuinely stuck we will most hopefully discover it when all |
| * stations are removed due to inactivity. |
| */ |
| if (wl->active_sta_count) { |
| wl1271_debug(DEBUG_TX, "No Tx (in FW) for %d ms. AP has " |
| " %d stations", |
| wl->conf.tx.tx_watchdog_timeout, |
| wl->active_sta_count); |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| goto out; |
| } |
| |
| wl1271_error("Tx stuck (in FW) for %d ms. Starting recovery", |
| wl->conf.tx.tx_watchdog_timeout); |
| wl12xx_queue_recovery_work(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wlcore_adjust_conf(struct wl1271 *wl) |
| { |
| /* Adjust settings according to optional module parameters */ |
| |
| /* Firmware Logger params */ |
| if (fwlog_mem_blocks != -1) { |
| if (fwlog_mem_blocks >= CONF_FWLOG_MIN_MEM_BLOCKS && |
| fwlog_mem_blocks <= CONF_FWLOG_MAX_MEM_BLOCKS) { |
| wl->conf.fwlog.mem_blocks = fwlog_mem_blocks; |
| } else { |
| wl1271_error( |
| "Illegal fwlog_mem_blocks=%d using default %d", |
| fwlog_mem_blocks, wl->conf.fwlog.mem_blocks); |
| } |
| } |
| |
| if (fwlog_param) { |
| if (!strcmp(fwlog_param, "continuous")) { |
| wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS; |
| } else if (!strcmp(fwlog_param, "ondemand")) { |
| wl->conf.fwlog.mode = WL12XX_FWLOG_ON_DEMAND; |
| } else if (!strcmp(fwlog_param, "dbgpins")) { |
| wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS; |
| wl->conf.fwlog.output = WL12XX_FWLOG_OUTPUT_DBG_PINS; |
| } else if (!strcmp(fwlog_param, "disable")) { |
| wl->conf.fwlog.mem_blocks = 0; |
| wl->conf.fwlog.output = WL12XX_FWLOG_OUTPUT_NONE; |
| } else { |
| wl1271_error("Unknown fwlog parameter %s", fwlog_param); |
| } |
| } |
| |
| if (bug_on_recovery != -1) |
| wl->conf.recovery.bug_on_recovery = (u8) bug_on_recovery; |
| |
| if (no_recovery != -1) |
| wl->conf.recovery.no_recovery = (u8) no_recovery; |
| } |
| |
| static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| u8 hlid, u8 tx_pkts) |
| { |
| bool fw_ps; |
| |
| fw_ps = test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map); |
| |
| /* |
| * Wake up from high level PS if the STA is asleep with too little |
| * packets in FW or if the STA is awake. |
| */ |
| if (!fw_ps || tx_pkts < WL1271_PS_STA_MAX_PACKETS) |
| wl12xx_ps_link_end(wl, wlvif, hlid); |
| |
| /* |
| * Start high-level PS if the STA is asleep with enough blocks in FW. |
| * Make an exception if this is the only connected link. In this |
| * case FW-memory congestion is less of a problem. |
| * Note that a single connected STA means 2*ap_count + 1 active links, |
| * since we must account for the global and broadcast AP links |
| * for each AP. The "fw_ps" check assures us the other link is a STA |
| * connected to the AP. Otherwise the FW would not set the PSM bit. |
| */ |
| else if (wl->active_link_count > (wl->ap_count*2 + 1) && fw_ps && |
| tx_pkts >= WL1271_PS_STA_MAX_PACKETS) |
| wl12xx_ps_link_start(wl, wlvif, hlid, true); |
| } |
| |
| static void wl12xx_irq_update_links_status(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct wl_fw_status *status) |
| { |
| u32 cur_fw_ps_map; |
| u8 hlid; |
| |
| cur_fw_ps_map = status->link_ps_bitmap; |
| if (wl->ap_fw_ps_map != cur_fw_ps_map) { |
| wl1271_debug(DEBUG_PSM, |
| "link ps prev 0x%x cur 0x%x changed 0x%x", |
| wl->ap_fw_ps_map, cur_fw_ps_map, |
| wl->ap_fw_ps_map ^ cur_fw_ps_map); |
| |
| wl->ap_fw_ps_map = cur_fw_ps_map; |
| } |
| |
| for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, wl->num_links) |
| wl12xx_irq_ps_regulate_link(wl, wlvif, hlid, |
| wl->links[hlid].allocated_pkts); |
| } |
| |
| static int wlcore_fw_status(struct wl1271 *wl, struct wl_fw_status *status) |
| { |
| struct wl12xx_vif *wlvif; |
| struct timespec ts; |
| u32 old_tx_blk_count = wl->tx_blocks_available; |
| int avail, freed_blocks; |
| int i; |
| int ret; |
| struct wl1271_link *lnk; |
| |
| ret = wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, |
| wl->raw_fw_status, |
| wl->fw_status_len, false); |
| if (ret < 0) |
| return ret; |
| |
| wlcore_hw_convert_fw_status(wl, wl->raw_fw_status, wl->fw_status); |
| |
| wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, " |
| "drv_rx_counter = %d, tx_results_counter = %d)", |
| status->intr, |
| status->fw_rx_counter, |
| status->drv_rx_counter, |
| status->tx_results_counter); |
| |
| for (i = 0; i < NUM_TX_QUEUES; i++) { |
| /* prevent wrap-around in freed-packets counter */ |
| wl->tx_allocated_pkts[i] -= |
| (status->counters.tx_released_pkts[i] - |
| wl->tx_pkts_freed[i]) & 0xff; |
| |
| wl->tx_pkts_freed[i] = status->counters.tx_released_pkts[i]; |
| } |
| |
| |
| for_each_set_bit(i, wl->links_map, wl->num_links) { |
| u8 diff; |
| lnk = &wl->links[i]; |
| |
| /* prevent wrap-around in freed-packets counter */ |
| diff = (status->counters.tx_lnk_free_pkts[i] - |
| lnk->prev_freed_pkts) & 0xff; |
| |
| if (diff == 0) |
| continue; |
| |
| lnk->allocated_pkts -= diff; |
| lnk->prev_freed_pkts = status->counters.tx_lnk_free_pkts[i]; |
| |
| /* accumulate the prev_freed_pkts counter */ |
| lnk->total_freed_pkts += diff; |
| } |
| |
| /* prevent wrap-around in total blocks counter */ |
| if (likely(wl->tx_blocks_freed <= status->total_released_blks)) |
| freed_blocks = status->total_released_blks - |
| wl->tx_blocks_freed; |
| else |
| freed_blocks = 0x100000000LL - wl->tx_blocks_freed + |
| status->total_released_blks; |
| |
| wl->tx_blocks_freed = status->total_released_blks; |
| |
| wl->tx_allocated_blocks -= freed_blocks; |
| |
| /* |
| * If the FW freed some blocks: |
| * If we still have allocated blocks - re-arm the timer, Tx is |
| * not stuck. Otherwise, cancel the timer (no Tx currently). |
| */ |
| if (freed_blocks) { |
| if (wl->tx_allocated_blocks) |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| else |
| cancel_delayed_work(&wl->tx_watchdog_work); |
| } |
| |
| avail = status->tx_total - wl->tx_allocated_blocks; |
| |
| /* |
| * The FW might change the total number of TX memblocks before |
| * we get a notification about blocks being released. Thus, the |
| * available blocks calculation might yield a temporary result |
| * which is lower than the actual available blocks. Keeping in |
| * mind that only blocks that were allocated can be moved from |
| * TX to RX, tx_blocks_available should never decrease here. |
| */ |
| wl->tx_blocks_available = max((int)wl->tx_blocks_available, |
| avail); |
| |
| /* if more blocks are available now, tx work can be scheduled */ |
| if (wl->tx_blocks_available > old_tx_blk_count) |
| clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); |
| |
| /* for AP update num of allocated TX blocks per link and ps status */ |
| wl12xx_for_each_wlvif_ap(wl, wlvif) { |
| wl12xx_irq_update_links_status(wl, wlvif, status); |
| } |
| |
| /* update the host-chipset time offset */ |
| getnstimeofday(&ts); |
| wl->time_offset = (timespec_to_ns(&ts) >> 10) - |
| (s64)(status->fw_localtime); |
| |
| wl->fw_fast_lnk_map = status->link_fast_bitmap; |
| |
| return 0; |
| } |
| |
| static void wl1271_flush_deferred_work(struct wl1271 *wl) |
| { |
| struct sk_buff *skb; |
| |
| /* Pass all received frames to the network stack */ |
| while ((skb = skb_dequeue(&wl->deferred_rx_queue))) |
| ieee80211_rx_ni(wl->hw, skb); |
| |
| /* Return sent skbs to the network stack */ |
| while ((skb = skb_dequeue(&wl->deferred_tx_queue))) |
| ieee80211_tx_status_ni(wl->hw, skb); |
| } |
| |
| static void wl1271_netstack_work(struct work_struct *work) |
| { |
| struct wl1271 *wl = |
| container_of(work, struct wl1271, netstack_work); |
| |
| do { |
| wl1271_flush_deferred_work(wl); |
| } while (skb_queue_len(&wl->deferred_rx_queue)); |
| } |
| |
| #define WL1271_IRQ_MAX_LOOPS 256 |
| |
| static int wlcore_irq_locked(struct wl1271 *wl) |
| { |
| int ret = 0; |
| u32 intr; |
| int loopcount = WL1271_IRQ_MAX_LOOPS; |
| bool done = false; |
| unsigned int defer_count; |
| unsigned long flags; |
| |
| /* |
| * In case edge triggered interrupt must be used, we cannot iterate |
| * more than once without introducing race conditions with the hardirq. |
| */ |
| if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) |
| loopcount = 1; |
| |
| wl1271_debug(DEBUG_IRQ, "IRQ work"); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| while (!done && loopcount--) { |
| /* |
| * In order to avoid a race with the hardirq, clear the flag |
| * before acknowledging the chip. Since the mutex is held, |
| * wl1271_ps_elp_wakeup cannot be called concurrently. |
| */ |
| clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); |
| smp_mb__after_atomic(); |
| |
| ret = wlcore_fw_status(wl, wl->fw_status); |
| if (ret < 0) |
| goto out; |
| |
| wlcore_hw_tx_immediate_compl(wl); |
| |
| intr = wl->fw_status->intr; |
| intr &= WLCORE_ALL_INTR_MASK; |
| if (!intr) { |
| done = true; |
| continue; |
| } |
| |
| if (unlikely(intr & WL1271_ACX_INTR_WATCHDOG)) { |
| wl1271_error("HW watchdog interrupt received! starting recovery."); |
| wl->watchdog_recovery = true; |
| ret = -EIO; |
| |
| /* restarting the chip. ignore any other interrupt. */ |
| goto out; |
| } |
| |
| if (unlikely(intr & WL1271_ACX_SW_INTR_WATCHDOG)) { |
| wl1271_error("SW watchdog interrupt received! " |
| "starting recovery."); |
| wl->watchdog_recovery = true; |
| ret = -EIO; |
| |
| /* restarting the chip. ignore any other interrupt. */ |
| goto out; |
| } |
| |
| if (likely(intr & WL1271_ACX_INTR_DATA)) { |
| wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA"); |
| |
| ret = wlcore_rx(wl, wl->fw_status); |
| if (ret < 0) |
| goto out; |
| |
| /* Check if any tx blocks were freed */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) && |
| wl1271_tx_total_queue_count(wl) > 0) { |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| /* |
| * In order to avoid starvation of the TX path, |
| * call the work function directly. |
| */ |
| ret = wlcore_tx_work_locked(wl); |
| if (ret < 0) |
| goto out; |
| } else { |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| } |
| |
| /* check for tx results */ |
| ret = wlcore_hw_tx_delayed_compl(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* Make sure the deferred queues don't get too long */ |
| defer_count = skb_queue_len(&wl->deferred_tx_queue) + |
| skb_queue_len(&wl->deferred_rx_queue); |
| if (defer_count > WL1271_DEFERRED_QUEUE_LIMIT) |
| wl1271_flush_deferred_work(wl); |
| } |
| |
| if (intr & WL1271_ACX_INTR_EVENT_A) { |
| wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A"); |
| ret = wl1271_event_handle(wl, 0); |
| if (ret < 0) |
| goto out; |
| } |
| |
| if (intr & WL1271_ACX_INTR_EVENT_B) { |
| wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B"); |
| ret = wl1271_event_handle(wl, 1); |
| if (ret < 0) |
| goto out; |
| } |
| |
| if (intr & WL1271_ACX_INTR_INIT_COMPLETE) |
| wl1271_debug(DEBUG_IRQ, |
| "WL1271_ACX_INTR_INIT_COMPLETE"); |
| |
| if (intr & WL1271_ACX_INTR_HW_AVAILABLE) |
| wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE"); |
| } |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| return ret; |
| } |
| |
| static irqreturn_t wlcore_irq(int irq, void *cookie) |
| { |
| int ret; |
| unsigned long flags; |
| struct wl1271 *wl = cookie; |
| |
| /* complete the ELP completion */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); |
| if (wl->elp_compl) { |
| complete(wl->elp_compl); |
| wl->elp_compl = NULL; |
| } |
| |
| if (test_bit(WL1271_FLAG_SUSPENDED, &wl->flags)) { |
| /* don't enqueue a work right now. mark it as pending */ |
| set_bit(WL1271_FLAG_PENDING_WORK, &wl->flags); |
| wl1271_debug(DEBUG_IRQ, "should not enqueue work"); |
| disable_irq_nosync(wl->irq); |
| pm_wakeup_event(wl->dev, 0); |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| return IRQ_HANDLED; |
| } |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| /* TX might be handled here, avoid redundant work */ |
| set_bit(WL1271_FLAG_TX_PENDING, &wl->flags); |
| cancel_work_sync(&wl->tx_work); |
| |
| mutex_lock(&wl->mutex); |
| |
| ret = wlcore_irq_locked(wl); |
| if (ret) |
| wl12xx_queue_recovery_work(wl); |
| |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| /* In case TX was not handled here, queue TX work */ |
| clear_bit(WL1271_FLAG_TX_PENDING, &wl->flags); |
| if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) && |
| wl1271_tx_total_queue_count(wl) > 0) |
| ieee80211_queue_work(wl->hw, &wl->tx_work); |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| mutex_unlock(&wl->mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| struct vif_counter_data { |
| u8 counter; |
| |
| struct ieee80211_vif *cur_vif; |
| bool cur_vif_running; |
| }; |
| |
| static void wl12xx_vif_count_iter(void *data, u8 *mac, |
| struct ieee80211_vif *vif) |
| { |
| struct vif_counter_data *counter = data; |
| |
| counter->counter++; |
| if (counter->cur_vif == vif) |
| counter->cur_vif_running = true; |
| } |
| |
| /* caller must not hold wl->mutex, as it might deadlock */ |
| static void wl12xx_get_vif_count(struct ieee80211_hw *hw, |
| struct ieee80211_vif *cur_vif, |
| struct vif_counter_data *data) |
| { |
| memset(data, 0, sizeof(*data)); |
| data->cur_vif = cur_vif; |
| |
| ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL, |
| wl12xx_vif_count_iter, data); |
| } |
| |
| static int wl12xx_fetch_firmware(struct wl1271 *wl, bool plt) |
| { |
| const struct firmware *fw; |
| const char *fw_name; |
| enum wl12xx_fw_type fw_type; |
| int ret; |
| |
| if (plt) { |
| fw_type = WL12XX_FW_TYPE_PLT; |
| fw_name = wl->plt_fw_name; |
| } else { |
| /* |
| * we can't call wl12xx_get_vif_count() here because |
| * wl->mutex is taken, so use the cached last_vif_count value |
| */ |
| if (wl->last_vif_count > 1 && wl->mr_fw_name) { |
| fw_type = WL12XX_FW_TYPE_MULTI; |
| fw_name = wl->mr_fw_name; |
| } else { |
| fw_type = WL12XX_FW_TYPE_NORMAL; |
| fw_name = wl->sr_fw_name; |
| } |
| } |
| |
| if (wl->fw_type == fw_type) |
| return 0; |
| |
| wl1271_debug(DEBUG_BOOT, "booting firmware %s", fw_name); |
| |
| ret = request_firmware(&fw, fw_name, wl->dev); |
| |
| if (ret < 0) { |
| wl1271_error("could not get firmware %s: %d", fw_name, ret); |
| return ret; |
| } |
| |
| if (fw->size % 4) { |
| wl1271_error("firmware size is not multiple of 32 bits: %zu", |
| fw->size); |
| ret = -EILSEQ; |
| goto out; |
| } |
| |
| vfree(wl->fw); |
| wl->fw_type = WL12XX_FW_TYPE_NONE; |
| wl->fw_len = fw->size; |
| wl->fw = vmalloc(wl->fw_len); |
| |
| if (!wl->fw) { |
| wl1271_error("could not allocate memory for the firmware"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(wl->fw, fw->data, wl->fw_len); |
| ret = 0; |
| wl->fw_type = fw_type; |
| out: |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| void wl12xx_queue_recovery_work(struct wl1271 *wl) |
| { |
| /* Avoid a recursive recovery */ |
| if (wl->state == WLCORE_STATE_ON) { |
| WARN_ON(!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, |
| &wl->flags)); |
| |
| wl->state = WLCORE_STATE_RESTARTING; |
| set_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags); |
| wl1271_ps_elp_wakeup(wl); |
| wlcore_disable_interrupts_nosync(wl); |
| ieee80211_queue_work(wl->hw, &wl->recovery_work); |
| } |
| } |
| |
| size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen) |
| { |
| size_t len; |
| |
| /* Make sure we have enough room */ |
| len = min_t(size_t, maxlen, PAGE_SIZE - wl->fwlog_size); |
| |
| /* Fill the FW log file, consumed by the sysfs fwlog entry */ |
| memcpy(wl->fwlog + wl->fwlog_size, memblock, len); |
| wl->fwlog_size += len; |
| |
| return len; |
| } |
| |
| static void wl12xx_read_fwlog_panic(struct wl1271 *wl) |
| { |
| struct wlcore_partition_set part, old_part; |
| u32 addr; |
| u32 offset; |
| u32 end_of_log; |
| u8 *block; |
| int ret; |
| |
| if ((wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED) || |
| (wl->conf.fwlog.mem_blocks == 0)) |
| return; |
| |
| wl1271_info("Reading FW panic log"); |
| |
| block = kmalloc(wl->fw_mem_block_size, GFP_KERNEL); |
| if (!block) |
| return; |
| |
| /* |
| * Make sure the chip is awake and the logger isn't active. |
| * Do not send a stop fwlog command if the fw is hanged or if |
| * dbgpins are used (due to some fw bug). |
| */ |
| if (wl1271_ps_elp_wakeup(wl)) |
| goto out; |
| if (!wl->watchdog_recovery && |
| wl->conf.fwlog.output != WL12XX_FWLOG_OUTPUT_DBG_PINS) |
| wl12xx_cmd_stop_fwlog(wl); |
| |
| /* Read the first memory block address */ |
| ret = wlcore_fw_status(wl, wl->fw_status); |
| if (ret < 0) |
| goto out; |
| |
| addr = wl->fw_status->log_start_addr; |
| if (!addr) |
| goto out; |
| |
| if (wl->conf.fwlog.mode == WL12XX_FWLOG_CONTINUOUS) { |
| offset = sizeof(addr) + sizeof(struct wl1271_rx_descriptor); |
| end_of_log = wl->fwlog_end; |
| } else { |
| offset = sizeof(addr); |
| end_of_log = addr; |
| } |
| |
| old_part = wl->curr_part; |
| memset(&part, 0, sizeof(part)); |
| |
| /* Traverse the memory blocks linked list */ |
| do { |
| part.mem.start = wlcore_hw_convert_hwaddr(wl, addr); |
| part.mem.size = PAGE_SIZE; |
| |
| ret = wlcore_set_partition(wl, &part); |
| if (ret < 0) { |
| wl1271_error("%s: set_partition start=0x%X size=%d", |
| __func__, part.mem.start, part.mem.size); |
| goto out; |
| } |
| |
| memset(block, 0, wl->fw_mem_block_size); |
| ret = wlcore_read_hwaddr(wl, addr, block, |
| wl->fw_mem_block_size, false); |
| |
| if (ret < 0) |
| goto out; |
| |
| /* |
| * Memory blocks are linked to one another. The first 4 bytes |
| * of each memory block hold the hardware address of the next |
| * one. The last memory block points to the first one in |
| * on demand mode and is equal to 0x2000000 in continuous mode. |
| */ |
| addr = le32_to_cpup((__le32 *)block); |
| |
| if (!wl12xx_copy_fwlog(wl, block + offset, |
| wl->fw_mem_block_size - offset)) |
| break; |
| } while (addr && (addr != end_of_log)); |
| |
| wake_up_interruptible(&wl->fwlog_waitq); |
| |
| out: |
| kfree(block); |
| wlcore_set_partition(wl, &old_part); |
| } |
| |
| static void wlcore_print_recovery(struct wl1271 *wl) |
| { |
| u32 pc = 0; |
| u32 hint_sts = 0; |
| int ret; |
| |
| wl1271_info("Hardware recovery in progress. FW ver: %s", |
| wl->chip.fw_ver_str); |
| |
| /* change partitions momentarily so we can read the FW pc */ |
| ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); |
| if (ret < 0) |
| return; |
| |
| ret = wlcore_read_reg(wl, REG_PC_ON_RECOVERY, &pc); |
| if (ret < 0) |
| return; |
| |
| ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &hint_sts); |
| if (ret < 0) |
| return; |
| |
| wl1271_info("pc: 0x%x, hint_sts: 0x%08x count: %d", |
| pc, hint_sts, ++wl->recovery_count); |
| |
| wlcore_set_partition(wl, &wl->ptable[PART_WORK]); |
| } |
| |
| |
| static void wl1271_recovery_work(struct work_struct *work) |
| { |
| struct wl1271 *wl = |
| container_of(work, struct wl1271, recovery_work); |
| struct wl12xx_vif *wlvif; |
| struct ieee80211_vif *vif; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (wl->state == WLCORE_STATE_OFF || wl->plt) |
| goto out_unlock; |
| |
| if (!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags)) { |
| if (wl->conf.fwlog.output == WL12XX_FWLOG_OUTPUT_HOST) |
| wl12xx_read_fwlog_panic(wl); |
| wlcore_print_recovery(wl); |
| } |
| |
| BUG_ON(wl->conf.recovery.bug_on_recovery && |
| !test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags)); |
| |
| if (wl->conf.recovery.no_recovery) { |
| wl1271_info("No recovery (chosen on module load). Fw will remain stuck."); |
| goto out_unlock; |
| } |
| |
| /* Prevent spurious TX during FW restart */ |
| wlcore_stop_queues(wl, WLCORE_QUEUE_STOP_REASON_FW_RESTART); |
| |
| /* reboot the chipset */ |
| while (!list_empty(&wl->wlvif_list)) { |
| wlvif = list_first_entry(&wl->wlvif_list, |
| struct wl12xx_vif, list); |
| vif = wl12xx_wlvif_to_vif(wlvif); |
| __wl1271_op_remove_interface(wl, vif, false); |
| } |
| |
| wlcore_op_stop_locked(wl); |
| |
| ieee80211_restart_hw(wl->hw); |
| |
| /* |
| * Its safe to enable TX now - the queues are stopped after a request |
| * to restart the HW. |
| */ |
| wlcore_wake_queues(wl, WLCORE_QUEUE_STOP_REASON_FW_RESTART); |
| |
| out_unlock: |
| wl->watchdog_recovery = false; |
| clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags); |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int wlcore_fw_wakeup(struct wl1271 *wl) |
| { |
| return wlcore_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP); |
| } |
| |
| static int wl1271_setup(struct wl1271 *wl) |
| { |
| wl->raw_fw_status = kzalloc(wl->fw_status_len, GFP_KERNEL); |
| if (!wl->raw_fw_status) |
| goto err; |
| |
| wl->fw_status = kzalloc(sizeof(*wl->fw_status), GFP_KERNEL); |
| if (!wl->fw_status) |
| goto err; |
| |
| wl->tx_res_if = kzalloc(sizeof(*wl->tx_res_if), GFP_KERNEL); |
| if (!wl->tx_res_if) |
| goto err; |
| |
| return 0; |
| err: |
| kfree(wl->fw_status); |
| kfree(wl->raw_fw_status); |
| return -ENOMEM; |
| } |
| |
| static int wl12xx_set_power_on(struct wl1271 *wl) |
| { |
| int ret; |
| |
| msleep(WL1271_PRE_POWER_ON_SLEEP); |
| ret = wl1271_power_on(wl); |
| if (ret < 0) |
| goto out; |
| msleep(WL1271_POWER_ON_SLEEP); |
| wl1271_io_reset(wl); |
| wl1271_io_init(wl); |
| |
| ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); |
| if (ret < 0) |
| goto fail; |
| |
| /* ELP module wake up */ |
| ret = wlcore_fw_wakeup(wl); |
| if (ret < 0) |
| goto fail; |
| |
| out: |
| return ret; |
| |
| fail: |
| wl1271_power_off(wl); |
| return ret; |
| } |
| |
| static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt) |
| { |
| int ret = 0; |
| |
| ret = wl12xx_set_power_on(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* |
| * For wl127x based devices we could use the default block |
| * size (512 bytes), but due to a bug in the sdio driver, we |
| * need to set it explicitly after the chip is powered on. To |
| * simplify the code and since the performance impact is |
| * negligible, we use the same block size for all different |
| * chip types. |
| * |
| * Check if the bus supports blocksize alignment and, if it |
| * doesn't, make sure we don't have the quirk. |
| */ |
| if (!wl1271_set_block_size(wl)) |
| wl->quirks &= ~WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN; |
| |
| /* TODO: make sure the lower driver has set things up correctly */ |
| |
| ret = wl1271_setup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl12xx_fetch_firmware(wl, plt); |
| if (ret < 0) |
| goto out; |
| |
| out: |
| return ret; |
| } |
| |
| int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode) |
| { |
| int retries = WL1271_BOOT_RETRIES; |
| struct wiphy *wiphy = wl->hw->wiphy; |
| |
| static const char* const PLT_MODE[] = { |
| "PLT_OFF", |
| "PLT_ON", |
| "PLT_FEM_DETECT", |
| "PLT_CHIP_AWAKE" |
| }; |
| |
| int ret; |
| |
| mutex_lock(&wl->mutex); |
| |
| wl1271_notice("power up"); |
| |
| if (wl->state != WLCORE_STATE_OFF) { |
| wl1271_error("cannot go into PLT state because not " |
| "in off state: %d", wl->state); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* Indicate to lower levels that we are now in PLT mode */ |
| wl->plt = true; |
| wl->plt_mode = plt_mode; |
| |
| while (retries) { |
| retries--; |
| ret = wl12xx_chip_wakeup(wl, true); |
| if (ret < 0) |
| goto power_off; |
| |
| if (plt_mode != PLT_CHIP_AWAKE) { |
| ret = wl->ops->plt_init(wl); |
| if (ret < 0) |
| goto power_off; |
| } |
| |
| wl->state = WLCORE_STATE_ON; |
| wl1271_notice("firmware booted in PLT mode %s (%s)", |
| PLT_MODE[plt_mode], |
| wl->chip.fw_ver_str); |
| |
| /* update hw/fw version info in wiphy struct */ |
| wiphy->hw_version = wl->chip.id; |
| strncpy(wiphy->fw_version, wl->chip.fw_ver_str, |
| sizeof(wiphy->fw_version)); |
| |
| goto out; |
| |
| power_off: |
| wl1271_power_off(wl); |
| } |
| |
| wl->plt = false; |
| wl->plt_mode = PLT_OFF; |
| |
| wl1271_error("firmware boot in PLT mode failed despite %d retries", |
| WL1271_BOOT_RETRIES); |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| int wl1271_plt_stop(struct wl1271 *wl) |
| { |
| int ret = 0; |
| |
| wl1271_notice("power down"); |
| |
| /* |
| * Interrupts must be disabled before setting the state to OFF. |
| * Otherwise, the interrupt handler might be called and exit without |
| * reading the interrupt status. |
| */ |
| wlcore_disable_interrupts(wl); |
| mutex_lock(&wl->mutex); |
| if (!wl->plt) { |
| mutex_unlock(&wl->mutex); |
| |
| /* |
| * This will not necessarily enable interrupts as interrupts |
| * may have been disabled when op_stop was called. It will, |
| * however, balance the above call to disable_interrupts(). |
| */ |
| wlcore_enable_interrupts(wl); |
| |
| wl1271_error("cannot power down because not in PLT " |
| "state: %d", wl->state); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| mutex_unlock(&wl->mutex); |
| |
| wl1271_flush_deferred_work(wl); |
| cancel_work_sync(&wl->netstack_work); |
| cancel_work_sync(&wl->recovery_work); |
| cancel_delayed_work_sync(&wl->elp_work); |
| cancel_delayed_work_sync(&wl->tx_watchdog_work); |
| |
| mutex_lock(&wl->mutex); |
| wl1271_power_off(wl); |
| wl->flags = 0; |
| wl->sleep_auth = WL1271_PSM_ILLEGAL; |
| wl->state = WLCORE_STATE_OFF; |
| wl->plt = false; |
| wl->plt_mode = PLT_OFF; |
| wl->rx_counter = 0; |
| mutex_unlock(&wl->mutex); |
| |
| out: |
| return ret; |
| } |
| |
| static void wl1271_op_tx(struct ieee80211_hw *hw, |
| struct ieee80211_tx_control *control, |
| struct sk_buff *skb) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_vif *vif = info->control.vif; |
| struct wl12xx_vif *wlvif = NULL; |
| unsigned long flags; |
| int q, mapping; |
| u8 hlid; |
| |
| if (!vif) { |
| wl1271_debug(DEBUG_TX, "DROP skb with no vif"); |
| ieee80211_free_txskb(hw, skb); |
| return; |
| } |
| |
| wlvif = wl12xx_vif_to_data(vif); |
| mapping = skb_get_queue_mapping(skb); |
| q = wl1271_tx_get_queue(mapping); |
| |
| hlid = wl12xx_tx_get_hlid(wl, wlvif, skb, control->sta); |
| |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| |
| /* |
| * drop the packet if the link is invalid or the queue is stopped |
| * for any reason but watermark. Watermark is a "soft"-stop so we |
| * allow these packets through. |
| */ |
| if (hlid == WL12XX_INVALID_LINK_ID || |
| (!test_bit(hlid, wlvif->links_map)) || |
| (wlcore_is_queue_stopped_locked(wl, wlvif, q) && |
| !wlcore_is_queue_stopped_by_reason_locked(wl, wlvif, q, |
| WLCORE_QUEUE_STOP_REASON_WATERMARK))) { |
| wl1271_debug(DEBUG_TX, "DROP skb hlid %d q %d", hlid, q); |
| ieee80211_free_txskb(hw, skb); |
| goto out; |
| } |
| |
| wl1271_debug(DEBUG_TX, "queue skb hlid %d q %d len %d", |
| hlid, q, skb->len); |
| skb_queue_tail(&wl->links[hlid].tx_queue[q], skb); |
| |
| wl->tx_queue_count[q]++; |
| wlvif->tx_queue_count[q]++; |
| |
| /* |
| * The workqueue is slow to process the tx_queue and we need stop |
| * the queue here, otherwise the queue will get too long. |
| */ |
| if (wlvif->tx_queue_count[q] >= WL1271_TX_QUEUE_HIGH_WATERMARK && |
| !wlcore_is_queue_stopped_by_reason_locked(wl, wlvif, q, |
| WLCORE_QUEUE_STOP_REASON_WATERMARK)) { |
| wl1271_debug(DEBUG_TX, "op_tx: stopping queues for q %d", q); |
| wlcore_stop_queue_locked(wl, wlvif, q, |
| WLCORE_QUEUE_STOP_REASON_WATERMARK); |
| } |
| |
| /* |
| * The chip specific setup must run before the first TX packet - |
| * before that, the tx_work will not be initialized! |
| */ |
| |
| if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) && |
| !test_bit(WL1271_FLAG_TX_PENDING, &wl->flags)) |
| ieee80211_queue_work(wl->hw, &wl->tx_work); |
| |
| out: |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| } |
| |
| int wl1271_tx_dummy_packet(struct wl1271 *wl) |
| { |
| unsigned long flags; |
| int q; |
| |
| /* no need to queue a new dummy packet if one is already pending */ |
| if (test_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags)) |
| return 0; |
| |
| q = wl1271_tx_get_queue(skb_get_queue_mapping(wl->dummy_packet)); |
| |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| set_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags); |
| wl->tx_queue_count[q]++; |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| /* The FW is low on RX memory blocks, so send the dummy packet asap */ |
| if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags)) |
| return wlcore_tx_work_locked(wl); |
| |
| /* |
| * If the FW TX is busy, TX work will be scheduled by the threaded |
| * interrupt handler function |
| */ |
| return 0; |
| } |
| |
| /* |
| * The size of the dummy packet should be at least 1400 bytes. However, in |
| * order to minimize the number of bus transactions, aligning it to 512 bytes |
| * boundaries could be beneficial, performance wise |
| */ |
| #define TOTAL_TX_DUMMY_PACKET_SIZE (ALIGN(1400, 512)) |
| |
| static struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr_3addr *hdr; |
| unsigned int dummy_packet_size; |
| |
| dummy_packet_size = TOTAL_TX_DUMMY_PACKET_SIZE - |
| sizeof(struct wl1271_tx_hw_descr) - sizeof(*hdr); |
| |
| skb = dev_alloc_skb(TOTAL_TX_DUMMY_PACKET_SIZE); |
| if (!skb) { |
| wl1271_warning("Failed to allocate a dummy packet skb"); |
| return NULL; |
| } |
| |
| skb_reserve(skb, sizeof(struct wl1271_tx_hw_descr)); |
| |
| hdr = (struct ieee80211_hdr_3addr *) skb_put(skb, sizeof(*hdr)); |
| memset(hdr, 0, sizeof(*hdr)); |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | |
| IEEE80211_STYPE_NULLFUNC | |
| IEEE80211_FCTL_TODS); |
| |
| memset(skb_put(skb, dummy_packet_size), 0, dummy_packet_size); |
| |
| /* Dummy packets require the TID to be management */ |
| skb->priority = WL1271_TID_MGMT; |
| |
| /* Initialize all fields that might be used */ |
| skb_set_queue_mapping(skb, 0); |
| memset(IEEE80211_SKB_CB(skb), 0, sizeof(struct ieee80211_tx_info)); |
| |
| return skb; |
| } |
| |
| |
| #ifdef CONFIG_PM |
| static int |
| wl1271_validate_wowlan_pattern(struct cfg80211_pkt_pattern *p) |
| { |
| int num_fields = 0, in_field = 0, fields_size = 0; |
| int i, pattern_len = 0; |
| |
| if (!p->mask) { |
| wl1271_warning("No mask in WoWLAN pattern"); |
| return -EINVAL; |
| } |
| |
| /* |
| * The pattern is broken up into segments of bytes at different offsets |
| * that need to be checked by the FW filter. Each segment is called |
| * a field in the FW API. We verify that the total number of fields |
| * required for this pattern won't exceed FW limits (8) |
| * as well as the total fields buffer won't exceed the FW limit. |
| * Note that if there's a pattern which crosses Ethernet/IP header |
| * boundary a new field is required. |
| */ |
| for (i = 0; i < p->pattern_len; i++) { |
| if (test_bit(i, (unsigned long *)p->mask)) { |
| if (!in_field) { |
| in_field = 1; |
| pattern_len = 1; |
| } else { |
| if (i == WL1271_RX_FILTER_ETH_HEADER_SIZE) { |
| num_fields++; |
| fields_size += pattern_len + |
| RX_FILTER_FIELD_OVERHEAD; |
| pattern_len = 1; |
| } else |
| pattern_len++; |
| } |
| } else { |
| if (in_field) { |
| in_field = 0; |
| fields_size += pattern_len + |
| RX_FILTER_FIELD_OVERHEAD; |
| num_fields++; |
| } |
| } |
| } |
| |
| if (in_field) { |
| fields_size += pattern_len + RX_FILTER_FIELD_OVERHEAD; |
| num_fields++; |
| } |
| |
| if (num_fields > WL1271_RX_FILTER_MAX_FIELDS) { |
| wl1271_warning("RX Filter too complex. Too many segments"); |
| return -EINVAL; |
| } |
| |
| if (fields_size > WL1271_RX_FILTER_MAX_FIELDS_SIZE) { |
| wl1271_warning("RX filter pattern is too big"); |
| return -E2BIG; |
| } |
| |
| return 0; |
| } |
| |
| struct wl12xx_rx_filter *wl1271_rx_filter_alloc(void) |
| { |
| return kzalloc(sizeof(struct wl12xx_rx_filter), GFP_KERNEL); |
| } |
| |
| void wl1271_rx_filter_free(struct wl12xx_rx_filter *filter) |
| { |
| int i; |
| |
| if (filter == NULL) |
| return; |
| |
| for (i = 0; i < filter->num_fields; i++) |
| kfree(filter->fields[i].pattern); |
| |
| kfree(filter); |
| } |
| |
| int wl1271_rx_filter_alloc_field(struct wl12xx_rx_filter *filter, |
| u16 offset, u8 flags, |
| const u8 *pattern, u8 len) |
| { |
| struct wl12xx_rx_filter_field *field; |
| |
| if (filter->num_fields == WL1271_RX_FILTER_MAX_FIELDS) { |
| wl1271_warning("Max fields per RX filter. can't alloc another"); |
| return -EINVAL; |
| } |
| |
| field = &filter->fields[filter->num_fields]; |
| |
| field->pattern = kzalloc(len, GFP_KERNEL); |
| if (!field->pattern) { |
| wl1271_warning("Failed to allocate RX filter pattern"); |
| return -ENOMEM; |
| } |
| |
| filter->num_fields++; |
| |
| field->offset = cpu_to_le16(offset); |
| field->flags = flags; |
| field->len = len; |
| memcpy(field->pattern, pattern, len); |
| |
| return 0; |
| } |
| |
| int wl1271_rx_filter_get_fields_size(struct wl12xx_rx_filter *filter) |
| { |
| int i, fields_size = 0; |
| |
| for (i = 0; i < filter->num_fields; i++) |
| fields_size += filter->fields[i].len + |
| sizeof(struct wl12xx_rx_filter_field) - |
| sizeof(u8 *); |
| |
| return fields_size; |
| } |
| |
| void wl1271_rx_filter_flatten_fields(struct wl12xx_rx_filter *filter, |
| u8 *buf) |
| { |
| int i; |
| struct wl12xx_rx_filter_field *field; |
| |
| for (i = 0; i < filter->num_fields; i++) { |
| field = (struct wl12xx_rx_filter_field *)buf; |
| |
| field->offset = filter->fields[i].offset; |
| field->flags = filter->fields[i].flags; |
| field->len = filter->fields[i].len; |
| |
| memcpy(&field->pattern, filter->fields[i].pattern, field->len); |
| buf += sizeof(struct wl12xx_rx_filter_field) - |
| sizeof(u8 *) + field->len; |
| } |
| } |
| |
| /* |
| * Allocates an RX filter returned through f |
| * which needs to be freed using rx_filter_free() |
| */ |
| static int |
| wl1271_convert_wowlan_pattern_to_rx_filter(struct cfg80211_pkt_pattern *p, |
| struct wl12xx_rx_filter **f) |
| { |
| int i, j, ret = 0; |
| struct wl12xx_rx_filter *filter; |
| u16 offset; |
| u8 flags, len; |
| |
| filter = wl1271_rx_filter_alloc(); |
| if (!filter) { |
| wl1271_warning("Failed to alloc rx filter"); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| i = 0; |
| while (i < p->pattern_len) { |
| if (!test_bit(i, (unsigned long *)p->mask)) { |
| i++; |
| continue; |
| } |
| |
| for (j = i; j < p->pattern_len; j++) { |
| if (!test_bit(j, (unsigned long *)p->mask)) |
| break; |
| |
| if (i < WL1271_RX_FILTER_ETH_HEADER_SIZE && |
| j >= WL1271_RX_FILTER_ETH_HEADER_SIZE) |
| break; |
| } |
| |
| if (i < WL1271_RX_FILTER_ETH_HEADER_SIZE) { |
| offset = i; |
| flags = WL1271_RX_FILTER_FLAG_ETHERNET_HEADER; |
| } else { |
| offset = i - WL1271_RX_FILTER_ETH_HEADER_SIZE; |
| flags = WL1271_RX_FILTER_FLAG_IP_HEADER; |
| } |
| |
| len = j - i; |
| |
| ret = wl1271_rx_filter_alloc_field(filter, |
| offset, |
| flags, |
| &p->pattern[i], len); |
| if (ret) |
| goto err; |
| |
| i = j; |
| } |
| |
| filter->action = FILTER_SIGNAL; |
| |
| *f = filter; |
| return 0; |
| |
| err: |
| wl1271_rx_filter_free(filter); |
| *f = NULL; |
| |
| return ret; |
| } |
| |
| static int wl1271_configure_wowlan(struct wl1271 *wl, |
| struct cfg80211_wowlan *wow) |
| { |
| int i, ret; |
| |
| if (!wow || wow->any || !wow->n_patterns) { |
| ret = wl1271_acx_default_rx_filter_enable(wl, 0, |
| FILTER_SIGNAL); |
| if (ret) |
| goto out; |
| |
| ret = wl1271_rx_filter_clear_all(wl); |
| if (ret) |
| goto out; |
| |
| return 0; |
| } |
| |
| if (WARN_ON(wow->n_patterns > WL1271_MAX_RX_FILTERS)) |
| return -EINVAL; |
| |
| /* Validate all incoming patterns before clearing current FW state */ |
| for (i = 0; i < wow->n_patterns; i++) { |
| ret = wl1271_validate_wowlan_pattern(&wow->patterns[i]); |
| if (ret) { |
| wl1271_warning("Bad wowlan pattern %d", i); |
| return ret; |
| } |
| } |
| |
| ret = wl1271_acx_default_rx_filter_enable(wl, 0, FILTER_SIGNAL); |
| if (ret) |
| goto out; |
| |
| ret = wl1271_rx_filter_clear_all(wl); |
| if (ret) |
| goto out; |
| |
| /* Translate WoWLAN patterns into filters */ |
| for (i = 0; i < wow->n_patterns; i++) { |
| struct cfg80211_pkt_pattern *p; |
| struct wl12xx_rx_filter *filter = NULL; |
| |
| p = &wow->patterns[i]; |
| |
| ret = wl1271_convert_wowlan_pattern_to_rx_filter(p, &filter); |
| if (ret) { |
| wl1271_warning("Failed to create an RX filter from " |
| "wowlan pattern %d", i); |
| goto out; |
| } |
| |
| ret = wl1271_rx_filter_enable(wl, i, 1, filter); |
| |
| wl1271_rx_filter_free(filter); |
| if (ret) |
| goto out; |
| } |
| |
| ret = wl1271_acx_default_rx_filter_enable(wl, 1, FILTER_DROP); |
| |
| out: |
| return ret; |
| } |
| |
| static int wl1271_configure_suspend_sta(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct cfg80211_wowlan *wow) |
| { |
| int ret = 0; |
| |
| if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_configure_wowlan(wl, wow); |
| if (ret < 0) |
| goto out_sleep; |
| |
| if ((wl->conf.conn.suspend_wake_up_event == |
| wl->conf.conn.wake_up_event) && |
| (wl->conf.conn.suspend_listen_interval == |
| wl->conf.conn.listen_interval)) |
| goto out_sleep; |
| |
| ret = wl1271_acx_wake_up_conditions(wl, wlvif, |
| wl->conf.conn.suspend_wake_up_event, |
| wl->conf.conn.suspend_listen_interval); |
| |
| if (ret < 0) |
| wl1271_error("suspend: set wake up conditions failed: %d", ret); |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| return ret; |
| |
| } |
| |
| static int wl1271_configure_suspend_ap(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif) |
| { |
| int ret = 0; |
| |
| if (!test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true); |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| return ret; |
| |
| } |
| |
| static int wl1271_configure_suspend(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct cfg80211_wowlan *wow) |
| { |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS) |
| return wl1271_configure_suspend_sta(wl, wlvif, wow); |
| if (wlvif->bss_type == BSS_TYPE_AP_BSS) |
| return wl1271_configure_suspend_ap(wl, wlvif); |
| return 0; |
| } |
| |
| static void wl1271_configure_resume(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int ret = 0; |
| bool is_ap = wlvif->bss_type == BSS_TYPE_AP_BSS; |
| bool is_sta = wlvif->bss_type == BSS_TYPE_STA_BSS; |
| |
| if ((!is_ap) && (!is_sta)) |
| return; |
| |
| if (is_sta && !test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) |
| return; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| return; |
| |
| if (is_sta) { |
| wl1271_configure_wowlan(wl, NULL); |
| |
| if ((wl->conf.conn.suspend_wake_up_event == |
| wl->conf.conn.wake_up_event) && |
| (wl->conf.conn.suspend_listen_interval == |
| wl->conf.conn.listen_interval)) |
| goto out_sleep; |
| |
| ret = wl1271_acx_wake_up_conditions(wl, wlvif, |
| wl->conf.conn.wake_up_event, |
| wl->conf.conn.listen_interval); |
| |
| if (ret < 0) |
| wl1271_error("resume: wake up conditions failed: %d", |
| ret); |
| |
| } else if (is_ap) { |
| ret = wl1271_acx_beacon_filter_opt(wl, wlvif, false); |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| } |
| |
| static int wl1271_op_suspend(struct ieee80211_hw *hw, |
| struct cfg80211_wowlan *wow) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow); |
| WARN_ON(!wow); |
| |
| /* we want to perform the recovery before suspending */ |
| if (test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) { |
| wl1271_warning("postponing suspend to perform recovery"); |
| return -EBUSY; |
| } |
| |
| wl1271_tx_flush(wl); |
| |
| mutex_lock(&wl->mutex); |
| wl->wow_enabled = true; |
| wl12xx_for_each_wlvif(wl, wlvif) { |
| ret = wl1271_configure_suspend(wl, wlvif, wow); |
| if (ret < 0) { |
| mutex_unlock(&wl->mutex); |
| wl1271_warning("couldn't prepare device to suspend"); |
| return ret; |
| } |
| } |
| mutex_unlock(&wl->mutex); |
| /* flush any remaining work */ |
| wl1271_debug(DEBUG_MAC80211, "flushing remaining works"); |
| |
| /* |
| * disable and re-enable interrupts in order to flush |
| * the threaded_irq |
| */ |
| wlcore_disable_interrupts(wl); |
| |
| /* |
| * set suspended flag to avoid triggering a new threaded_irq |
| * work. no need for spinlock as interrupts are disabled. |
| */ |
| set_bit(WL1271_FLAG_SUSPENDED, &wl->flags); |
| |
| wlcore_enable_interrupts(wl); |
| flush_work(&wl->tx_work); |
| flush_delayed_work(&wl->elp_work); |
| |
| /* |
| * Cancel the watchdog even if above tx_flush failed. We will detect |
| * it on resume anyway. |
| */ |
| cancel_delayed_work(&wl->tx_watchdog_work); |
| |
| return 0; |
| } |
| |
| static int wl1271_op_resume(struct ieee80211_hw *hw) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif; |
| unsigned long flags; |
| bool run_irq_work = false, pending_recovery; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d", |
| wl->wow_enabled); |
| WARN_ON(!wl->wow_enabled); |
| |
| /* |
| * re-enable irq_work enqueuing, and call irq_work directly if |
| * there is a pending work. |
| */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| clear_bit(WL1271_FLAG_SUSPENDED, &wl->flags); |
| if (test_and_clear_bit(WL1271_FLAG_PENDING_WORK, &wl->flags)) |
| run_irq_work = true; |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| mutex_lock(&wl->mutex); |
| |
| /* test the recovery flag before calling any SDIO functions */ |
| pending_recovery = test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, |
| &wl->flags); |
| |
| if (run_irq_work) { |
| wl1271_debug(DEBUG_MAC80211, |
| "run postponed irq_work directly"); |
| |
| /* don't talk to the HW if recovery is pending */ |
| if (!pending_recovery) { |
| ret = wlcore_irq_locked(wl); |
| if (ret) |
| wl12xx_queue_recovery_work(wl); |
| } |
| |
| wlcore_enable_interrupts(wl); |
| } |
| |
| if (pending_recovery) { |
| wl1271_warning("queuing forgotten recovery on resume"); |
| ieee80211_queue_work(wl->hw, &wl->recovery_work); |
| goto out; |
| } |
| |
| wl12xx_for_each_wlvif(wl, wlvif) { |
| wl1271_configure_resume(wl, wlvif); |
| } |
| |
| out: |
| wl->wow_enabled = false; |
| |
| /* |
| * Set a flag to re-init the watchdog on the first Tx after resume. |
| * That way we avoid possible conditions where Tx-complete interrupts |
| * fail to arrive and we perform a spurious recovery. |
| */ |
| set_bit(WL1271_FLAG_REINIT_TX_WDOG, &wl->flags); |
| mutex_unlock(&wl->mutex); |
| |
| return 0; |
| } |
| #endif |
| |
| static int wl1271_op_start(struct ieee80211_hw *hw) |
| { |
| wl1271_debug(DEBUG_MAC80211, "mac80211 start"); |
| |
| /* |
| * We have to delay the booting of the hardware because |
| * we need to know the local MAC address before downloading and |
| * initializing the firmware. The MAC address cannot be changed |
| * after boot, and without the proper MAC address, the firmware |
| * will not function properly. |
| * |
| * The MAC address is first known when the corresponding interface |
| * is added. That is where we will initialize the hardware. |
| */ |
| |
| return 0; |
| } |
| |
| static void wlcore_op_stop_locked(struct wl1271 *wl) |
| { |
| int i; |
| |
| if (wl->state == WLCORE_STATE_OFF) { |
| if (test_and_clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, |
| &wl->flags)) |
| wlcore_enable_interrupts(wl); |
| |
| return; |
| } |
| |
| /* |
| * this must be before the cancel_work calls below, so that the work |
| * functions don't perform further work. |
| */ |
| wl->state = WLCORE_STATE_OFF; |
| |
| /* |
| * Use the nosync variant to disable interrupts, so the mutex could be |
| * held while doing so without deadlocking. |
| */ |
| wlcore_disable_interrupts_nosync(wl); |
| |
| mutex_unlock(&wl->mutex); |
| |
| wlcore_synchronize_interrupts(wl); |
| if (!test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) |
| cancel_work_sync(&wl->recovery_work); |
| wl1271_flush_deferred_work(wl); |
| cancel_delayed_work_sync(&wl->scan_complete_work); |
| cancel_work_sync(&wl->netstack_work); |
| cancel_work_sync(&wl->tx_work); |
| cancel_delayed_work_sync(&wl->elp_work); |
| cancel_delayed_work_sync(&wl->tx_watchdog_work); |
| |
| /* let's notify MAC80211 about the remaining pending TX frames */ |
| mutex_lock(&wl->mutex); |
| wl12xx_tx_reset(wl); |
| |
| wl1271_power_off(wl); |
| /* |
| * In case a recovery was scheduled, interrupts were disabled to avoid |
| * an interrupt storm. Now that the power is down, it is safe to |
| * re-enable interrupts to balance the disable depth |
| */ |
| if (test_and_clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) |
| wlcore_enable_interrupts(wl); |
| |
| wl->band = IEEE80211_BAND_2GHZ; |
| |
| wl->rx_counter = 0; |
| wl->power_level = WL1271_DEFAULT_POWER_LEVEL; |
| wl->channel_type = NL80211_CHAN_NO_HT; |
| wl->tx_blocks_available = 0; |
| wl->tx_allocated_blocks = 0; |
| wl->tx_results_count = 0; |
| wl->tx_packets_count = 0; |
| wl->time_offset = 0; |
| wl->ap_fw_ps_map = 0; |
| wl->ap_ps_map = 0; |
| wl->sleep_auth = WL1271_PSM_ILLEGAL; |
| memset(wl->roles_map, 0, sizeof(wl->roles_map)); |
| memset(wl->links_map, 0, sizeof(wl->links_map)); |
| memset(wl->roc_map, 0, sizeof(wl->roc_map)); |
| memset(wl->session_ids, 0, sizeof(wl->session_ids)); |
| memset(wl->rx_filter_enabled, 0, sizeof(wl->rx_filter_enabled)); |
| wl->active_sta_count = 0; |
| wl->active_link_count = 0; |
| |
| /* The system link is always allocated */ |
| wl->links[WL12XX_SYSTEM_HLID].allocated_pkts = 0; |
| wl->links[WL12XX_SYSTEM_HLID].prev_freed_pkts = 0; |
| __set_bit(WL12XX_SYSTEM_HLID, wl->links_map); |
| |
| /* |
| * this is performed after the cancel_work calls and the associated |
| * mutex_lock, so that wl1271_op_add_interface does not accidentally |
| * get executed before all these vars have been reset. |
| */ |
| wl->flags = 0; |
| |
| wl->tx_blocks_freed = 0; |
| |
| for (i = 0; i < NUM_TX_QUEUES; i++) { |
| wl->tx_pkts_freed[i] = 0; |
| wl->tx_allocated_pkts[i] = 0; |
| } |
| |
| wl1271_debugfs_reset(wl); |
| |
| kfree(wl->raw_fw_status); |
| wl->raw_fw_status = NULL; |
| kfree(wl->fw_status); |
| wl->fw_status = NULL; |
| kfree(wl->tx_res_if); |
| wl->tx_res_if = NULL; |
| kfree(wl->target_mem_map); |
| wl->target_mem_map = NULL; |
| |
| /* |
| * FW channels must be re-calibrated after recovery, |
| * save current Reg-Domain channel configuration and clear it. |
| */ |
| memcpy(wl->reg_ch_conf_pending, wl->reg_ch_conf_last, |
| sizeof(wl->reg_ch_conf_pending)); |
| memset(wl->reg_ch_conf_last, 0, sizeof(wl->reg_ch_conf_last)); |
| } |
| |
| static void wlcore_op_stop(struct ieee80211_hw *hw) |
| { |
| struct wl1271 *wl = hw->priv; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 stop"); |
| |
| mutex_lock(&wl->mutex); |
| |
| wlcore_op_stop_locked(wl); |
| |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wlcore_channel_switch_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork; |
| struct wl1271 *wl; |
| struct ieee80211_vif *vif; |
| struct wl12xx_vif *wlvif; |
| int ret; |
| |
| dwork = container_of(work, struct delayed_work, work); |
| wlvif = container_of(dwork, struct wl12xx_vif, channel_switch_work); |
| wl = wlvif->wl; |
| |
| wl1271_info("channel switch failed (role_id: %d).", wlvif->role_id); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| /* check the channel switch is still ongoing */ |
| if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) |
| goto out; |
| |
| vif = wl12xx_wlvif_to_vif(wlvif); |
| ieee80211_chswitch_done(vif, false); |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl12xx_cmd_stop_channel_switch(wl, wlvif); |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wlcore_connection_loss_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork; |
| struct wl1271 *wl; |
| struct ieee80211_vif *vif; |
| struct wl12xx_vif *wlvif; |
| |
| dwork = container_of(work, struct delayed_work, work); |
| wlvif = container_of(dwork, struct wl12xx_vif, connection_loss_work); |
| wl = wlvif->wl; |
| |
| wl1271_info("Connection loss work (role_id: %d).", wlvif->role_id); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| /* Call mac80211 connection loss */ |
| if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) |
| goto out; |
| |
| vif = wl12xx_wlvif_to_vif(wlvif); |
| ieee80211_connection_loss(vif); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wlcore_pending_auth_complete_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork; |
| struct wl1271 *wl; |
| struct wl12xx_vif *wlvif; |
| unsigned long time_spare; |
| int ret; |
| |
| dwork = container_of(work, struct delayed_work, work); |
| wlvif = container_of(dwork, struct wl12xx_vif, |
| pending_auth_complete_work); |
| wl = wlvif->wl; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| /* |
| * Make sure a second really passed since the last auth reply. Maybe |
| * a second auth reply arrived while we were stuck on the mutex. |
| * Check for a little less than the timeout to protect from scheduler |
| * irregularities. |
| */ |
| time_spare = jiffies + |
| msecs_to_jiffies(WLCORE_PEND_AUTH_ROC_TIMEOUT - 50); |
| if (!time_after(time_spare, wlvif->pending_auth_reply_time)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* cancel the ROC if active */ |
| wlcore_update_inconn_sta(wl, wlvif, NULL, false); |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int wl12xx_allocate_rate_policy(struct wl1271 *wl, u8 *idx) |
| { |
| u8 policy = find_first_zero_bit(wl->rate_policies_map, |
| WL12XX_MAX_RATE_POLICIES); |
| if (policy >= WL12XX_MAX_RATE_POLICIES) |
| return -EBUSY; |
| |
| __set_bit(policy, wl->rate_policies_map); |
| *idx = policy; |
| return 0; |
| } |
| |
| static void wl12xx_free_rate_policy(struct wl1271 *wl, u8 *idx) |
| { |
| if (WARN_ON(*idx >= WL12XX_MAX_RATE_POLICIES)) |
| return; |
| |
| __clear_bit(*idx, wl->rate_policies_map); |
| *idx = WL12XX_MAX_RATE_POLICIES; |
| } |
| |
| static int wlcore_allocate_klv_template(struct wl1271 *wl, u8 *idx) |
| { |
| u8 policy = find_first_zero_bit(wl->klv_templates_map, |
| WLCORE_MAX_KLV_TEMPLATES); |
| if (policy >= WLCORE_MAX_KLV_TEMPLATES) |
| return -EBUSY; |
| |
| __set_bit(policy, wl->klv_templates_map); |
| *idx = policy; |
| return 0; |
| } |
| |
| static void wlcore_free_klv_template(struct wl1271 *wl, u8 *idx) |
| { |
| if (WARN_ON(*idx >= WLCORE_MAX_KLV_TEMPLATES)) |
| return; |
| |
| __clear_bit(*idx, wl->klv_templates_map); |
| *idx = WLCORE_MAX_KLV_TEMPLATES; |
| } |
| |
| static u8 wl12xx_get_role_type(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| switch (wlvif->bss_type) { |
| case BSS_TYPE_AP_BSS: |
| if (wlvif->p2p) |
| return WL1271_ROLE_P2P_GO; |
| else |
| return WL1271_ROLE_AP; |
| |
| case BSS_TYPE_STA_BSS: |
| if (wlvif->p2p) |
| return WL1271_ROLE_P2P_CL; |
| else |
| return WL1271_ROLE_STA; |
| |
| case BSS_TYPE_IBSS: |
| return WL1271_ROLE_IBSS; |
| |
| default: |
| wl1271_error("invalid bss_type: %d", wlvif->bss_type); |
| } |
| return WL12XX_INVALID_ROLE_TYPE; |
| } |
| |
| static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int i; |
| |
| /* clear everything but the persistent data */ |
| memset(wlvif, 0, offsetof(struct wl12xx_vif, persistent)); |
| |
| switch (ieee80211_vif_type_p2p(vif)) { |
| case NL80211_IFTYPE_P2P_CLIENT: |
| wlvif->p2p = 1; |
| /* fall-through */ |
| case NL80211_IFTYPE_STATION: |
| wlvif->bss_type = BSS_TYPE_STA_BSS; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| wlvif->bss_type = BSS_TYPE_IBSS; |
| break; |
| case NL80211_IFTYPE_P2P_GO: |
| wlvif->p2p = 1; |
| /* fall-through */ |
| case NL80211_IFTYPE_AP: |
| wlvif->bss_type = BSS_TYPE_AP_BSS; |
| break; |
| default: |
| wlvif->bss_type = MAX_BSS_TYPE; |
| return -EOPNOTSUPP; |
| } |
| |
| wlvif->role_id = WL12XX_INVALID_ROLE_ID; |
| wlvif->dev_role_id = WL12XX_INVALID_ROLE_ID; |
| wlvif->dev_hlid = WL12XX_INVALID_LINK_ID; |
| |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS || |
| wlvif->bss_type == BSS_TYPE_IBSS) { |
| /* init sta/ibss data */ |
| wlvif->sta.hlid = WL12XX_INVALID_LINK_ID; |
| wl12xx_allocate_rate_policy(wl, &wlvif->sta.basic_rate_idx); |
| wl12xx_allocate_rate_policy(wl, &wlvif->sta.ap_rate_idx); |
| wl12xx_allocate_rate_policy(wl, &wlvif->sta.p2p_rate_idx); |
| wlcore_allocate_klv_template(wl, &wlvif->sta.klv_template_id); |
| wlvif->basic_rate_set = CONF_TX_RATE_MASK_BASIC; |
| wlvif->basic_rate = CONF_TX_RATE_MASK_BASIC; |
| wlvif->rate_set = CONF_TX_RATE_MASK_BASIC; |
| } else { |
| /* init ap data */ |
| wlvif->ap.bcast_hlid = WL12XX_INVALID_LINK_ID; |
| wlvif->ap.global_hlid = WL12XX_INVALID_LINK_ID; |
| wl12xx_allocate_rate_policy(wl, &wlvif->ap.mgmt_rate_idx); |
| wl12xx_allocate_rate_policy(wl, &wlvif->ap.bcast_rate_idx); |
| for (i = 0; i < CONF_TX_MAX_AC_COUNT; i++) |
| wl12xx_allocate_rate_policy(wl, |
| &wlvif->ap.ucast_rate_idx[i]); |
| wlvif->basic_rate_set = CONF_TX_ENABLED_RATES; |
| /* |
| * TODO: check if basic_rate shouldn't be |
| * wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); |
| * instead (the same thing for STA above). |
| */ |
| wlvif->basic_rate = CONF_TX_ENABLED_RATES; |
| /* TODO: this seems to be used only for STA, check it */ |
| wlvif->rate_set = CONF_TX_ENABLED_RATES; |
| } |
| |
| wlvif->bitrate_masks[IEEE80211_BAND_2GHZ] = wl->conf.tx.basic_rate; |
| wlvif->bitrate_masks[IEEE80211_BAND_5GHZ] = wl->conf.tx.basic_rate_5; |
| wlvif->beacon_int = WL1271_DEFAULT_BEACON_INT; |
| |
| /* |
| * mac80211 configures some values globally, while we treat them |
| * per-interface. thus, on init, we have to copy them from wl |
| */ |
| wlvif->band = wl->band; |
| wlvif->channel = wl->channel; |
| wlvif->power_level = wl->power_level; |
| wlvif->channel_type = wl->channel_type; |
| |
| INIT_WORK(&wlvif->rx_streaming_enable_work, |
| wl1271_rx_streaming_enable_work); |
| INIT_WORK(&wlvif->rx_streaming_disable_work, |
| wl1271_rx_streaming_disable_work); |
| INIT_DELAYED_WORK(&wlvif->channel_switch_work, |
| wlcore_channel_switch_work); |
| INIT_DELAYED_WORK(&wlvif->connection_loss_work, |
| wlcore_connection_loss_work); |
| INIT_DELAYED_WORK(&wlvif->pending_auth_complete_work, |
| wlcore_pending_auth_complete_work); |
| INIT_LIST_HEAD(&wlvif->list); |
| |
| setup_timer(&wlvif->rx_streaming_timer, wl1271_rx_streaming_timer, |
| (unsigned long) wlvif); |
| return 0; |
| } |
| |
| static int wl12xx_init_fw(struct wl1271 *wl) |
| { |
| int retries = WL1271_BOOT_RETRIES; |
| bool booted = false; |
| struct wiphy *wiphy = wl->hw->wiphy; |
| int ret; |
| |
| while (retries) { |
| retries--; |
| ret = wl12xx_chip_wakeup(wl, false); |
| if (ret < 0) |
| goto power_off; |
| |
| ret = wl->ops->boot(wl); |
| if (ret < 0) |
| goto power_off; |
| |
| ret = wl1271_hw_init(wl); |
| if (ret < 0) |
| goto irq_disable; |
| |
| booted = true; |
| break; |
| |
| irq_disable: |
| mutex_unlock(&wl->mutex); |
| /* Unlocking the mutex in the middle of handling is |
| inherently unsafe. In this case we deem it safe to do, |
| because we need to let any possibly pending IRQ out of |
| the system (and while we are WLCORE_STATE_OFF the IRQ |
| work function will not do anything.) Also, any other |
| possible concurrent operations will fail due to the |
| current state, hence the wl1271 struct should be safe. */ |
| wlcore_disable_interrupts(wl); |
| wl1271_flush_deferred_work(wl); |
| cancel_work_sync(&wl->netstack_work); |
| mutex_lock(&wl->mutex); |
| power_off: |
| wl1271_power_off(wl); |
| } |
| |
| if (!booted) { |
| wl1271_error("firmware boot failed despite %d retries", |
| WL1271_BOOT_RETRIES); |
| goto out; |
| } |
| |
| wl1271_info("firmware booted (%s)", wl->chip.fw_ver_str); |
| |
| /* update hw/fw version info in wiphy struct */ |
| wiphy->hw_version = wl->chip.id; |
| strncpy(wiphy->fw_version, wl->chip.fw_ver_str, |
| sizeof(wiphy->fw_version)); |
| |
| /* |
| * Now we know if 11a is supported (info from the NVS), so disable |
| * 11a channels if not supported |
| */ |
| if (!wl->enable_11a) |
| wiphy->bands[IEEE80211_BAND_5GHZ]->n_channels = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "11a is %ssupported", |
| wl->enable_11a ? "" : "not "); |
| |
| wl->state = WLCORE_STATE_ON; |
| out: |
| return ret; |
| } |
| |
| static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif) |
| { |
| return wlvif->dev_hlid != WL12XX_INVALID_LINK_ID; |
| } |
| |
| /* |
| * Check whether a fw switch (i.e. moving from one loaded |
| * fw to another) is needed. This function is also responsible |
| * for updating wl->last_vif_count, so it must be called before |
| * loading a non-plt fw (so the correct fw (single-role/multi-role) |
| * will be used). |
| */ |
| static bool wl12xx_need_fw_change(struct wl1271 *wl, |
| struct vif_counter_data vif_counter_data, |
| bool add) |
| { |
| enum wl12xx_fw_type current_fw = wl->fw_type; |
| u8 vif_count = vif_counter_data.counter; |
| |
| if (test_bit(WL1271_FLAG_VIF_CHANGE_IN_PROGRESS, &wl->flags)) |
| return false; |
| |
| /* increase the vif count if this is a new vif */ |
| if (add && !vif_counter_data.cur_vif_running) |
| vif_count++; |
| |
| wl->last_vif_count = vif_count; |
| |
| /* no need for fw change if the device is OFF */ |
| if (wl->state == WLCORE_STATE_OFF) |
| return false; |
| |
| /* no need for fw change if a single fw is used */ |
| if (!wl->mr_fw_name) |
| return false; |
| |
| if (vif_count > 1 && current_fw == WL12XX_FW_TYPE_NORMAL) |
| return true; |
| if (vif_count <= 1 && current_fw == WL12XX_FW_TYPE_MULTI) |
| return true; |
| |
| return false; |
| } |
| |
| /* |
| * Enter "forced psm". Make sure the sta is in psm against the ap, |
| * to make the fw switch a bit more disconnection-persistent. |
| */ |
| static void wl12xx_force_active_psm(struct wl1271 *wl) |
| { |
| struct wl12xx_vif *wlvif; |
| |
| wl12xx_for_each_wlvif_sta(wl, wlvif) { |
| wl1271_ps_set_mode(wl, wlvif, STATION_POWER_SAVE_MODE); |
| } |
| } |
| |
| struct wlcore_hw_queue_iter_data { |
| unsigned long hw_queue_map[BITS_TO_LONGS(WLCORE_NUM_MAC_ADDRESSES)]; |
| /* current vif */ |
| struct ieee80211_vif *vif; |
| /* is the current vif among those iterated */ |
| bool cur_running; |
| }; |
| |
| static void wlcore_hw_queue_iter(void *data, u8 *mac, |
| struct ieee80211_vif *vif) |
| { |
| struct wlcore_hw_queue_iter_data *iter_data = data; |
| |
| if (WARN_ON_ONCE(vif->hw_queue[0] == IEEE80211_INVAL_HW_QUEUE)) |
| return; |
| |
| if (iter_data->cur_running || vif == iter_data->vif) { |
| iter_data->cur_running = true; |
| return; |
| } |
| |
| __set_bit(vif->hw_queue[0] / NUM_TX_QUEUES, iter_data->hw_queue_map); |
| } |
| |
| static int wlcore_allocate_hw_queue_base(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif) |
| { |
| struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); |
| struct wlcore_hw_queue_iter_data iter_data = {}; |
| int i, q_base; |
| |
| iter_data.vif = vif; |
| |
| /* mark all bits taken by active interfaces */ |
| ieee80211_iterate_active_interfaces_atomic(wl->hw, |
| IEEE80211_IFACE_ITER_RESUME_ALL, |
| wlcore_hw_queue_iter, &iter_data); |
| |
| /* the current vif is already running in mac80211 (resume/recovery) */ |
| if (iter_data.cur_running) { |
| wlvif->hw_queue_base = vif->hw_queue[0]; |
| wl1271_debug(DEBUG_MAC80211, |
| "using pre-allocated hw queue base %d", |
| wlvif->hw_queue_base); |
| |
| /* interface type might have changed type */ |
| goto adjust_cab_queue; |
| } |
| |
| q_base = find_first_zero_bit(iter_data.hw_queue_map, |
| WLCORE_NUM_MAC_ADDRESSES); |
| if (q_base >= WLCORE_NUM_MAC_ADDRESSES) |
| return -EBUSY; |
| |
| wlvif->hw_queue_base = q_base * NUM_TX_QUEUES; |
| wl1271_debug(DEBUG_MAC80211, "allocating hw queue base: %d", |
| wlvif->hw_queue_base); |
| |
| for (i = 0; i < NUM_TX_QUEUES; i++) { |
| wl->queue_stop_reasons[wlvif->hw_queue_base + i] = 0; |
| /* register hw queues in mac80211 */ |
| vif->hw_queue[i] = wlvif->hw_queue_base + i; |
| } |
| |
| adjust_cab_queue: |
| /* the last places are reserved for cab queues per interface */ |
| if (wlvif->bss_type == BSS_TYPE_AP_BSS) |
| vif->cab_queue = NUM_TX_QUEUES * WLCORE_NUM_MAC_ADDRESSES + |
| wlvif->hw_queue_base / NUM_TX_QUEUES; |
| else |
| vif->cab_queue = IEEE80211_INVAL_HW_QUEUE; |
| |
| return 0; |
| } |
| |
| static int wl1271_op_add_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct vif_counter_data vif_count; |
| int ret = 0; |
| u8 role_type; |
| |
| if (wl->plt) { |
| wl1271_error("Adding Interface not allowed while in PLT mode"); |
| return -EBUSY; |
| } |
| |
| vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | |
| IEEE80211_VIF_SUPPORTS_CQM_RSSI; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", |
| ieee80211_vif_type_p2p(vif), vif->addr); |
| |
| wl12xx_get_vif_count(hw, vif, &vif_count); |
| |
| mutex_lock(&wl->mutex); |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out_unlock; |
| |
| /* |
| * in some very corner case HW recovery scenarios its possible to |
| * get here before __wl1271_op_remove_interface is complete, so |
| * opt out if that is the case. |
| */ |
| if (test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags) || |
| test_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| |
| ret = wl12xx_init_vif_data(wl, vif); |
| if (ret < 0) |
| goto out; |
| |
| wlvif->wl = wl; |
| role_type = wl12xx_get_role_type(wl, wlvif); |
| if (role_type == WL12XX_INVALID_ROLE_TYPE) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = wlcore_allocate_hw_queue_base(wl, wlvif); |
| if (ret < 0) |
| goto out; |
| |
| if (wl12xx_need_fw_change(wl, vif_count, true)) { |
| wl12xx_force_active_psm(wl); |
| set_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags); |
| mutex_unlock(&wl->mutex); |
| wl1271_recovery_work(&wl->recovery_work); |
| return 0; |
| } |
| |
| /* |
| * TODO: after the nvs issue will be solved, move this block |
| * to start(), and make sure here the driver is ON. |
| */ |
| if (wl->state == WLCORE_STATE_OFF) { |
| /* |
| * we still need this in order to configure the fw |
| * while uploading the nvs |
| */ |
| memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN); |
| |
| ret = wl12xx_init_fw(wl); |
| if (ret < 0) |
| goto out; |
| } |
| |
| ret = wl12xx_cmd_role_enable(wl, vif->addr, |
| role_type, &wlvif->role_id); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_init_vif_specific(wl, vif); |
| if (ret < 0) |
| goto out; |
| |
| list_add(&wlvif->list, &wl->wlvif_list); |
| set_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags); |
| |
| if (wlvif->bss_type == BSS_TYPE_AP_BSS) |
| wl->ap_count++; |
| else |
| wl->sta_count++; |
| out: |
| wl1271_ps_elp_sleep(wl); |
| out_unlock: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static void __wl1271_op_remove_interface(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| bool reset_tx_queues) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int i, ret; |
| bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface"); |
| |
| if (!test_and_clear_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags)) |
| return; |
| |
| /* because of hardware recovery, we may get here twice */ |
| if (wl->state == WLCORE_STATE_OFF) |
| return; |
| |
| wl1271_info("down"); |
| |
| if (wl->scan.state != WL1271_SCAN_STATE_IDLE && |
| wl->scan_wlvif == wlvif) { |
| /* |
| * Rearm the tx watchdog just before idling scan. This |
| * prevents just-finished scans from triggering the watchdog |
| */ |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| |
| wl->scan.state = WL1271_SCAN_STATE_IDLE; |
| memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); |
| wl->scan_wlvif = NULL; |
| wl->scan.req = NULL; |
| ieee80211_scan_completed(wl->hw, true); |
| } |
| |
| if (wl->sched_vif == wlvif) |
| wl->sched_vif = NULL; |
| |
| if (wl->roc_vif == vif) { |
| wl->roc_vif = NULL; |
| ieee80211_remain_on_channel_expired(wl->hw); |
| } |
| |
| if (!test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) { |
| /* disable active roles */ |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto deinit; |
| |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS || |
| wlvif->bss_type == BSS_TYPE_IBSS) { |
| if (wl12xx_dev_role_started(wlvif)) |
| wl12xx_stop_dev(wl, wlvif); |
| } |
| |
| ret = wl12xx_cmd_role_disable(wl, &wlvif->role_id); |
| if (ret < 0) |
| goto deinit; |
| |
| wl1271_ps_elp_sleep(wl); |
| } |
| deinit: |
| wl12xx_tx_reset_wlvif(wl, wlvif); |
| |
| /* clear all hlids (except system_hlid) */ |
| wlvif->dev_hlid = WL12XX_INVALID_LINK_ID; |
| |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS || |
| wlvif->bss_type == BSS_TYPE_IBSS) { |
| wlvif->sta.hlid = WL12XX_INVALID_LINK_ID; |
| wl12xx_free_rate_policy(wl, &wlvif->sta.basic_rate_idx); |
| wl12xx_free_rate_policy(wl, &wlvif->sta.ap_rate_idx); |
| wl12xx_free_rate_policy(wl, &wlvif->sta.p2p_rate_idx); |
| wlcore_free_klv_template(wl, &wlvif->sta.klv_template_id); |
| } else { |
| wlvif->ap.bcast_hlid = WL12XX_INVALID_LINK_ID; |
| wlvif->ap.global_hlid = WL12XX_INVALID_LINK_ID; |
| wl12xx_free_rate_policy(wl, &wlvif->ap.mgmt_rate_idx); |
| wl12xx_free_rate_policy(wl, &wlvif->ap.bcast_rate_idx); |
| for (i = 0; i < CONF_TX_MAX_AC_COUNT; i++) |
| wl12xx_free_rate_policy(wl, |
| &wlvif->ap.ucast_rate_idx[i]); |
| wl1271_free_ap_keys(wl, wlvif); |
| } |
| |
| dev_kfree_skb(wlvif->probereq); |
| wlvif->probereq = NULL; |
| if (wl->last_wlvif == wlvif) |
| wl->last_wlvif = NULL; |
| list_del(&wlvif->list); |
| memset(wlvif->ap.sta_hlid_map, 0, sizeof(wlvif->ap.sta_hlid_map)); |
| wlvif->role_id = WL12XX_INVALID_ROLE_ID; |
| wlvif->dev_role_id = WL12XX_INVALID_ROLE_ID; |
| |
| if (is_ap) |
| wl->ap_count--; |
| else |
| wl->sta_count--; |
| |
| /* |
| * Last AP, have more stations. Configure sleep auth according to STA. |
| * Don't do thin on unintended recovery. |
| */ |
| if (test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags) && |
| !test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags)) |
| goto unlock; |
| |
| if (wl->ap_count == 0 && is_ap) { |
| /* mask ap events */ |
| wl->event_mask &= ~wl->ap_event_mask; |
| wl1271_event_unmask(wl); |
| } |
| |
| if (wl->ap_count == 0 && is_ap && wl->sta_count) { |
| u8 sta_auth = wl->conf.conn.sta_sleep_auth; |
| /* Configure for power according to debugfs */ |
| if (sta_auth != WL1271_PSM_ILLEGAL) |
| wl1271_acx_sleep_auth(wl, sta_auth); |
| /* Configure for ELP power saving */ |
| else |
| wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); |
| } |
| |
| unlock: |
| mutex_unlock(&wl->mutex); |
| |
| del_timer_sync(&wlvif->rx_streaming_timer); |
| cancel_work_sync(&wlvif->rx_streaming_enable_work); |
| cancel_work_sync(&wlvif->rx_streaming_disable_work); |
| cancel_delayed_work_sync(&wlvif->connection_loss_work); |
| cancel_delayed_work_sync(&wlvif->channel_switch_work); |
| cancel_delayed_work_sync(&wlvif->pending_auth_complete_work); |
| |
| mutex_lock(&wl->mutex); |
| } |
| |
| static void wl1271_op_remove_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct wl12xx_vif *iter; |
| struct vif_counter_data vif_count; |
| |
| wl12xx_get_vif_count(hw, vif, &vif_count); |
| mutex_lock(&wl->mutex); |
| |
| if (wl->state == WLCORE_STATE_OFF || |
| !test_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags)) |
| goto out; |
| |
| /* |
| * wl->vif can be null here if someone shuts down the interface |
| * just when hardware recovery has been started. |
| */ |
| wl12xx_for_each_wlvif(wl, iter) { |
| if (iter != wlvif) |
| continue; |
| |
| __wl1271_op_remove_interface(wl, vif, true); |
| break; |
| } |
| WARN_ON(iter != wlvif); |
| if (wl12xx_need_fw_change(wl, vif_count, false)) { |
| wl12xx_force_active_psm(wl); |
| set_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags); |
| wl12xx_queue_recovery_work(wl); |
| } |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int wl12xx_op_change_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum nl80211_iftype new_type, bool p2p) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret; |
| |
| set_bit(WL1271_FLAG_VIF_CHANGE_IN_PROGRESS, &wl->flags); |
| wl1271_op_remove_interface(hw, vif); |
| |
| vif->type = new_type; |
| vif->p2p = p2p; |
| ret = wl1271_op_add_interface(hw, vif); |
| |
| clear_bit(WL1271_FLAG_VIF_CHANGE_IN_PROGRESS, &wl->flags); |
| return ret; |
| } |
| |
| static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int ret; |
| bool is_ibss = (wlvif->bss_type == BSS_TYPE_IBSS); |
| |
| /* |
| * One of the side effects of the JOIN command is that is clears |
| * WPA/WPA2 keys from the chipset. Performing a JOIN while associated |
| * to a WPA/WPA2 access point will therefore kill the data-path. |
| * Currently the only valid scenario for JOIN during association |
| * is on roaming, in which case we will also be given new keys. |
| * Keep the below message for now, unless it starts bothering |
| * users who really like to roam a lot :) |
| */ |
| if (test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) |
| wl1271_info("JOIN while associated."); |
| |
| /* clear encryption type */ |
| wlvif->encryption_type = KEY_NONE; |
| |
| if (is_ibss) |
| ret = wl12xx_cmd_role_start_ibss(wl, wlvif); |
| else { |
| if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) { |
| /* |
| * TODO: this is an ugly workaround for wl12xx fw |
| * bug - we are not able to tx/rx after the first |
| * start_sta, so make dummy start+stop calls, |
| * and then call start_sta again. |
| * this should be fixed in the fw. |
| */ |
| wl12xx_cmd_role_start_sta(wl, wlvif); |
| wl12xx_cmd_role_stop_sta(wl, wlvif); |
| } |
| |
| ret = wl12xx_cmd_role_start_sta(wl, wlvif); |
| } |
| |
| return ret; |
| } |
| |
| static int wl1271_ssid_set(struct wl12xx_vif *wlvif, struct sk_buff *skb, |
| int offset) |
| { |
| u8 ssid_len; |
| const u8 *ptr = cfg80211_find_ie(WLAN_EID_SSID, skb->data + offset, |
| skb->len - offset); |
| |
| if (!ptr) { |
| wl1271_error("No SSID in IEs!"); |
| return -ENOENT; |
| } |
| |
| ssid_len = ptr[1]; |
| if (ssid_len > IEEE80211_MAX_SSID_LEN) { |
| wl1271_error("SSID is too long!"); |
| return -EINVAL; |
| } |
| |
| wlvif->ssid_len = ssid_len; |
| memcpy(wlvif->ssid, ptr+2, ssid_len); |
| return 0; |
| } |
| |
| static int wlcore_set_ssid(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); |
| struct sk_buff *skb; |
| int ieoffset; |
| |
| /* we currently only support setting the ssid from the ap probe req */ |
| if (wlvif->bss_type != BSS_TYPE_STA_BSS) |
| return -EINVAL; |
| |
| skb = ieee80211_ap_probereq_get(wl->hw, vif); |
| if (!skb) |
| return -EINVAL; |
| |
| ieoffset = offsetof(struct ieee80211_mgmt, |
| u.probe_req.variable); |
| wl1271_ssid_set(wlvif, skb, ieoffset); |
| dev_kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 sta_rate_set) |
| { |
| int ieoffset; |
| int ret; |
| |
| wlvif->aid = bss_conf->aid; |
| wlvif->channel_type = cfg80211_get_chandef_type(&bss_conf->chandef); |
| wlvif->beacon_int = bss_conf->beacon_int; |
| wlvif->wmm_enabled = bss_conf->qos; |
| |
| set_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags); |
| |
| /* |
| * with wl1271, we don't need to update the |
| * beacon_int and dtim_period, because the firmware |
| * updates it by itself when the first beacon is |
| * received after a join. |
| */ |
| ret = wl1271_cmd_build_ps_poll(wl, wlvif, wlvif->aid); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * Get a template for hardware connection maintenance |
| */ |
| dev_kfree_skb(wlvif->probereq); |
| wlvif->probereq = wl1271_cmd_build_ap_probe_req(wl, |
| wlvif, |
| NULL); |
| ieoffset = offsetof(struct ieee80211_mgmt, |
| u.probe_req.variable); |
| wl1271_ssid_set(wlvif, wlvif->probereq, ieoffset); |
| |
| /* enable the connection monitoring feature */ |
| ret = wl1271_acx_conn_monit_params(wl, wlvif, true); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * The join command disable the keep-alive mode, shut down its process, |
| * and also clear the template config, so we need to reset it all after |
| * the join. The acx_aid starts the keep-alive process, and the order |
| * of the commands below is relevant. |
| */ |
| ret = wl1271_acx_keep_alive_mode(wl, wlvif, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_acx_aid(wl, wlvif, wlvif->aid); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl12xx_cmd_build_klv_null_data(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_acx_keep_alive_config(wl, wlvif, |
| wlvif->sta.klv_template_id, |
| ACX_KEEP_ALIVE_TPL_VALID); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * The default fw psm configuration is AUTO, while mac80211 default |
| * setting is off (ACTIVE), so sync the fw with the correct value. |
| */ |
| ret = wl1271_ps_set_mode(wl, wlvif, STATION_ACTIVE_MODE); |
| if (ret < 0) |
| return ret; |
| |
| if (sta_rate_set) { |
| wlvif->rate_set = |
| wl1271_tx_enabled_rates_get(wl, |
| sta_rate_set, |
| wlvif->band); |
| ret = wl1271_acx_sta_rate_policies(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int ret; |
| bool sta = wlvif->bss_type == BSS_TYPE_STA_BSS; |
| |
| /* make sure we are connected (sta) joined */ |
| if (sta && |
| !test_and_clear_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) |
| return false; |
| |
| /* make sure we are joined (ibss) */ |
| if (!sta && |
| test_and_clear_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags)) |
| return false; |
| |
| if (sta) { |
| /* use defaults when not associated */ |
| wlvif->aid = 0; |
| |
| /* free probe-request template */ |
| dev_kfree_skb(wlvif->probereq); |
| wlvif->probereq = NULL; |
| |
| /* disable connection monitor features */ |
| ret = wl1271_acx_conn_monit_params(wl, wlvif, false); |
| if (ret < 0) |
| return ret; |
| |
| /* Disable the keep-alive feature */ |
| ret = wl1271_acx_keep_alive_mode(wl, wlvif, false); |
| if (ret < 0) |
| return ret; |
| |
| /* disable beacon filtering */ |
| ret = wl1271_acx_beacon_filter_opt(wl, wlvif, false); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) { |
| struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); |
| |
| wl12xx_cmd_stop_channel_switch(wl, wlvif); |
| ieee80211_chswitch_done(vif, false); |
| cancel_delayed_work(&wlvif->channel_switch_work); |
| } |
| |
| /* invalidate keep-alive template */ |
| wl1271_acx_keep_alive_config(wl, wlvif, |
| wlvif->sta.klv_template_id, |
| ACX_KEEP_ALIVE_TPL_INVALID); |
| |
| return 0; |
| } |
| |
| static void wl1271_set_band_rate(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| wlvif->basic_rate_set = wlvif->bitrate_masks[wlvif->band]; |
| wlvif->rate_set = wlvif->basic_rate_set; |
| } |
| |
| static void wl1271_sta_handle_idle(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| bool idle) |
| { |
| bool cur_idle = !test_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags); |
| |
| if (idle == cur_idle) |
| return; |
| |
| if (idle) { |
| clear_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags); |
| } else { |
| /* The current firmware only supports sched_scan in idle */ |
| if (wl->sched_vif == wlvif) |
| wl->ops->sched_scan_stop(wl, wlvif); |
| |
| set_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags); |
| } |
| } |
| |
| static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| struct ieee80211_conf *conf, u32 changed) |
| { |
| int ret; |
| |
| if (conf->power_level != wlvif->power_level) { |
| ret = wl1271_acx_tx_power(wl, wlvif, conf->power_level); |
| if (ret < 0) |
| return ret; |
| |
| wlvif->power_level = conf->power_level; |
| } |
| |
| return 0; |
| } |
| |
| static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif; |
| struct ieee80211_conf *conf = &hw->conf; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 config psm %s power %d %s" |
| " changed 0x%x", |
| conf->flags & IEEE80211_CONF_PS ? "on" : "off", |
| conf->power_level, |
| conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use", |
| changed); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (changed & IEEE80211_CONF_CHANGE_POWER) |
| wl->power_level = conf->power_level; |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* configure each interface */ |
| wl12xx_for_each_wlvif(wl, wlvif) { |
| ret = wl12xx_config_vif(wl, wlvif, conf, changed); |
| if (ret < 0) |
| goto out_sleep; |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| struct wl1271_filter_params { |
| bool enabled; |
| int mc_list_length; |
| u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN]; |
| }; |
| |
| static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, |
| struct netdev_hw_addr_list *mc_list) |
| { |
| struct wl1271_filter_params *fp; |
| struct netdev_hw_addr *ha; |
| |
| fp = kzalloc(sizeof(*fp), GFP_ATOMIC); |
| if (!fp) { |
| wl1271_error("Out of memory setting filters."); |
| return 0; |
| } |
| |
| /* update multicast filtering parameters */ |
| fp->mc_list_length = 0; |
| if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) { |
| fp->enabled = false; |
| } else { |
| fp->enabled = true; |
| netdev_hw_addr_list_for_each(ha, mc_list) { |
| memcpy(fp->mc_list[fp->mc_list_length], |
| ha->addr, ETH_ALEN); |
| fp->mc_list_length++; |
| } |
| } |
| |
| return (u64)(unsigned long)fp; |
| } |
| |
| #define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ |
| FIF_ALLMULTI | \ |
| FIF_FCSFAIL | \ |
| FIF_BCN_PRBRESP_PROMISC | \ |
| FIF_CONTROL | \ |
| FIF_OTHER_BSS) |
| |
| static void wl1271_op_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed, |
| unsigned int *total, u64 multicast) |
| { |
| struct wl1271_filter_params *fp = (void *)(unsigned long)multicast; |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif; |
| |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter changed %x" |
| " total %x", changed, *total); |
| |
| mutex_lock(&wl->mutex); |
| |
| *total &= WL1271_SUPPORTED_FILTERS; |
| changed &= WL1271_SUPPORTED_FILTERS; |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl12xx_for_each_wlvif(wl, wlvif) { |
| if (wlvif->bss_type != BSS_TYPE_AP_BSS) { |
| if (*total & FIF_ALLMULTI) |
| ret = wl1271_acx_group_address_tbl(wl, wlvif, |
| false, |
| NULL, 0); |
| else if (fp) |
| ret = wl1271_acx_group_address_tbl(wl, wlvif, |
| fp->enabled, |
| fp->mc_list, |
| fp->mc_list_length); |
| if (ret < 0) |
| goto out_sleep; |
| } |
| } |
| |
| /* |
| * the fw doesn't provide an api to configure the filters. instead, |
| * the filters configuration is based on the active roles / ROC |
| * state. |
| */ |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| kfree(fp); |
| } |
| |
| static int wl1271_record_ap_key(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| u8 id, u8 key_type, u8 key_size, |
| const u8 *key, u8 hlid, u32 tx_seq_32, |
| u16 tx_seq_16) |
| { |
| struct wl1271_ap_key *ap_key; |
| int i; |
| |
| wl1271_debug(DEBUG_CRYPT, "record ap key id %d", (int)id); |
| |
| if (key_size > MAX_KEY_SIZE) |
| return -EINVAL; |
| |
| /* |
| * Find next free entry in ap_keys. Also check we are not replacing |
| * an existing key. |
| */ |
| for (i = 0; i < MAX_NUM_KEYS; i++) { |
| if (wlvif->ap.recorded_keys[i] == NULL) |
| break; |
| |
| if (wlvif->ap.recorded_keys[i]->id == id) { |
| wl1271_warning("trying to record key replacement"); |
| return -EINVAL; |
| } |
| } |
| |
| if (i == MAX_NUM_KEYS) |
| return -EBUSY; |
| |
| ap_key = kzalloc(sizeof(*ap_key), GFP_KERNEL); |
| if (!ap_key) |
| return -ENOMEM; |
| |
| ap_key->id = id; |
| ap_key->key_type = key_type; |
| ap_key->key_size = key_size; |
| memcpy(ap_key->key, key, key_size); |
| ap_key->hlid = hlid; |
| ap_key->tx_seq_32 = tx_seq_32; |
| ap_key->tx_seq_16 = tx_seq_16; |
| |
| wlvif->ap.recorded_keys[i] = ap_key; |
| return 0; |
| } |
| |
| static void wl1271_free_ap_keys(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_NUM_KEYS; i++) { |
| kfree(wlvif->ap.recorded_keys[i]); |
| wlvif->ap.recorded_keys[i] = NULL; |
| } |
| } |
| |
| static int wl1271_ap_init_hwenc(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int i, ret = 0; |
| struct wl1271_ap_key *key; |
| bool wep_key_added = false; |
| |
| for (i = 0; i < MAX_NUM_KEYS; i++) { |
| u8 hlid; |
| if (wlvif->ap.recorded_keys[i] == NULL) |
| break; |
| |
| key = wlvif->ap.recorded_keys[i]; |
| hlid = key->hlid; |
| if (hlid == WL12XX_INVALID_LINK_ID) |
| hlid = wlvif->ap.bcast_hlid; |
| |
| ret = wl1271_cmd_set_ap_key(wl, wlvif, KEY_ADD_OR_REPLACE, |
| key->id, key->key_type, |
| key->key_size, key->key, |
| hlid, key->tx_seq_32, |
| key->tx_seq_16); |
| if (ret < 0) |
| goto out; |
| |
| if (key->key_type == KEY_WEP) |
| wep_key_added = true; |
| } |
| |
| if (wep_key_added) { |
| ret = wl12xx_cmd_set_default_wep_key(wl, wlvif->default_key, |
| wlvif->ap.bcast_hlid); |
| if (ret < 0) |
| goto out; |
| } |
| |
| out: |
| wl1271_free_ap_keys(wl, wlvif); |
| return ret; |
| } |
| |
| static int wl1271_set_key(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| u16 action, u8 id, u8 key_type, |
| u8 key_size, const u8 *key, u32 tx_seq_32, |
| u16 tx_seq_16, struct ieee80211_sta *sta) |
| { |
| int ret; |
| bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); |
| |
| if (is_ap) { |
| struct wl1271_station *wl_sta; |
| u8 hlid; |
| |
| if (sta) { |
| wl_sta = (struct wl1271_station *)sta->drv_priv; |
| hlid = wl_sta->hlid; |
| } else { |
| hlid = wlvif->ap.bcast_hlid; |
| } |
| |
| if (!test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) { |
| /* |
| * We do not support removing keys after AP shutdown. |
| * Pretend we do to make mac80211 happy. |
| */ |
| if (action != KEY_ADD_OR_REPLACE) |
| return 0; |
| |
| ret = wl1271_record_ap_key(wl, wlvif, id, |
| key_type, key_size, |
| key, hlid, tx_seq_32, |
| tx_seq_16); |
| } else { |
| ret = wl1271_cmd_set_ap_key(wl, wlvif, action, |
| id, key_type, key_size, |
| key, hlid, tx_seq_32, |
| tx_seq_16); |
| } |
| |
| if (ret < 0) |
| return ret; |
| } else { |
| const u8 *addr; |
| static const u8 bcast_addr[ETH_ALEN] = { |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff |
| }; |
| |
| addr = sta ? sta->addr : bcast_addr; |
| |
| if (is_zero_ether_addr(addr)) { |
| /* We dont support TX only encryption */ |
| return -EOPNOTSUPP; |
| } |
| |
| /* The wl1271 does not allow to remove unicast keys - they |
| will be cleared automatically on next CMD_JOIN. Ignore the |
| request silently, as we dont want the mac80211 to emit |
| an error message. */ |
| if (action == KEY_REMOVE && !is_broadcast_ether_addr(addr)) |
| return 0; |
| |
| /* don't remove key if hlid was already deleted */ |
| if (action == KEY_REMOVE && |
| wlvif->sta.hlid == WL12XX_INVALID_LINK_ID) |
| return 0; |
| |
| ret = wl1271_cmd_set_sta_key(wl, wlvif, action, |
| id, key_type, key_size, |
| key, addr, tx_seq_32, |
| tx_seq_16); |
| if (ret < 0) |
| return ret; |
| |
| } |
| |
| return 0; |
| } |
| |
| static int wlcore_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key_conf) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret; |
| bool might_change_spare = |
| key_conf->cipher == WL1271_CIPHER_SUITE_GEM || |
| key_conf->cipher == WLAN_CIPHER_SUITE_TKIP; |
| |
| if (might_change_spare) { |
| /* |
| * stop the queues and flush to ensure the next packets are |
| * in sync with FW spare block accounting |
| */ |
| wlcore_stop_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK); |
| wl1271_tx_flush(wl); |
| } |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EAGAIN; |
| goto out_wake_queues; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out_wake_queues; |
| |
| ret = wlcore_hw_set_key(wl, cmd, vif, sta, key_conf); |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out_wake_queues: |
| if (might_change_spare) |
| wlcore_wake_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK); |
| |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key_conf) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| u32 tx_seq_32 = 0; |
| u16 tx_seq_16 = 0; |
| u8 key_type; |
| u8 hlid; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 set key"); |
| |
| wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x sta: %p", cmd, sta); |
| wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", |
| key_conf->cipher, key_conf->keyidx, |
| key_conf->keylen, key_conf->flags); |
| wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen); |
| |
| if (wlvif->bss_type == BSS_TYPE_AP_BSS) |
| if (sta) { |
| struct wl1271_station *wl_sta = (void *)sta->drv_priv; |
| hlid = wl_sta->hlid; |
| } else { |
| hlid = wlvif->ap.bcast_hlid; |
| } |
| else |
| hlid = wlvif->sta.hlid; |
| |
| if (hlid != WL12XX_INVALID_LINK_ID) { |
| u64 tx_seq = wl->links[hlid].total_freed_pkts; |
| tx_seq_32 = WL1271_TX_SECURITY_HI32(tx_seq); |
| tx_seq_16 = WL1271_TX_SECURITY_LO16(tx_seq); |
| } |
| |
| switch (key_conf->cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| key_type = KEY_WEP; |
| |
| key_conf->hw_key_idx = key_conf->keyidx; |
| break; |
| case WLAN_CIPHER_SUITE_TKIP: |
| key_type = KEY_TKIP; |
| key_conf->hw_key_idx = key_conf->keyidx; |
| break; |
| case WLAN_CIPHER_SUITE_CCMP: |
| key_type = KEY_AES; |
| key_conf->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE; |
| break; |
| case WL1271_CIPHER_SUITE_GEM: |
| key_type = KEY_GEM; |
| break; |
| default: |
| wl1271_error("Unknown key algo 0x%x", key_conf->cipher); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| switch (cmd) { |
| case SET_KEY: |
| ret = wl1271_set_key(wl, wlvif, KEY_ADD_OR_REPLACE, |
| key_conf->keyidx, key_type, |
| key_conf->keylen, key_conf->key, |
| tx_seq_32, tx_seq_16, sta); |
| if (ret < 0) { |
| wl1271_error("Could not add or replace key"); |
| return ret; |
| } |
| |
| /* |
| * reconfiguring arp response if the unicast (or common) |
| * encryption key type was changed |
| */ |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS && |
| (sta || key_type == KEY_WEP) && |
| wlvif->encryption_type != key_type) { |
| wlvif->encryption_type = key_type; |
| ret = wl1271_cmd_build_arp_rsp(wl, wlvif); |
| if (ret < 0) { |
| wl1271_warning("build arp rsp failed: %d", ret); |
| return ret; |
| } |
| } |
| break; |
| |
| case DISABLE_KEY: |
| ret = wl1271_set_key(wl, wlvif, KEY_REMOVE, |
| key_conf->keyidx, key_type, |
| key_conf->keylen, key_conf->key, |
| 0, 0, sta); |
| if (ret < 0) { |
| wl1271_error("Could not remove key"); |
| return ret; |
| } |
| break; |
| |
| default: |
| wl1271_error("Unsupported key cmd 0x%x", cmd); |
| return -EOPNOTSUPP; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wlcore_set_key); |
| |
| static void wl1271_op_set_default_key_idx(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| int key_idx) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 set default key idx %d", |
| key_idx); |
| |
| /* we don't handle unsetting of default key */ |
| if (key_idx == -1) |
| return; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EAGAIN; |
| goto out_unlock; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out_unlock; |
| |
| wlvif->default_key = key_idx; |
| |
| /* the default WEP key needs to be configured at least once */ |
| if (wlvif->encryption_type == KEY_WEP) { |
| ret = wl12xx_cmd_set_default_wep_key(wl, |
| key_idx, |
| wlvif->sta.hlid); |
| if (ret < 0) |
| goto out_sleep; |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out_unlock: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| void wlcore_regdomain_config(struct wl1271 *wl) |
| { |
| int ret; |
| |
| if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) |
| return; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wlcore_cmd_regdomain_config_locked(wl); |
| if (ret < 0) { |
| wl12xx_queue_recovery_work(wl); |
| goto out; |
| } |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int wl1271_op_hw_scan(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct cfg80211_scan_request *req) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret; |
| u8 *ssid = NULL; |
| size_t len = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan"); |
| |
| if (req->n_ssids) { |
| ssid = req->ssids[0].ssid; |
| len = req->ssids[0].ssid_len; |
| } |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| /* |
| * We cannot return -EBUSY here because cfg80211 will expect |
| * a call to ieee80211_scan_completed if we do - in this case |
| * there won't be any call. |
| */ |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* fail if there is any role in ROC */ |
| if (find_first_bit(wl->roc_map, WL12XX_MAX_ROLES) < WL12XX_MAX_ROLES) { |
| /* don't allow scanning right now */ |
| ret = -EBUSY; |
| goto out_sleep; |
| } |
| |
| ret = wlcore_scan(hw->priv, vif, ssid, len, req); |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 cancel hw scan"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| if (wl->scan.state == WL1271_SCAN_STATE_IDLE) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| if (wl->scan.state != WL1271_SCAN_STATE_DONE) { |
| ret = wl->ops->scan_stop(wl, wlvif); |
| if (ret < 0) |
| goto out_sleep; |
| } |
| |
| /* |
| * Rearm the tx watchdog just before idling scan. This |
| * prevents just-finished scans from triggering the watchdog |
| */ |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| |
| wl->scan.state = WL1271_SCAN_STATE_IDLE; |
| memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); |
| wl->scan_wlvif = NULL; |
| wl->scan.req = NULL; |
| ieee80211_scan_completed(wl->hw, true); |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| cancel_delayed_work_sync(&wl->scan_complete_work); |
| } |
| |
| static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct cfg80211_sched_scan_request *req, |
| struct ieee80211_sched_scan_ies *ies) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_start"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl->ops->sched_scan_start(wl, wlvif, req, ies); |
| if (ret < 0) |
| goto out_sleep; |
| |
| wl->sched_vif = wlvif; |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| return ret; |
| } |
| |
| static int wl1271_op_sched_scan_stop(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_stop"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl->ops->sched_scan_stop(wl, wlvif); |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return 0; |
| } |
| |
| static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret = 0; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_acx_frag_threshold(wl, value); |
| if (ret < 0) |
| wl1271_warning("wl1271_op_set_frag_threshold failed: %d", ret); |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif; |
| int ret = 0; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl12xx_for_each_wlvif(wl, wlvif) { |
| ret = wl1271_acx_rts_threshold(wl, wlvif, value); |
| if (ret < 0) |
| wl1271_warning("set rts threshold failed: %d", ret); |
| } |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static void wl12xx_remove_ie(struct sk_buff *skb, u8 eid, int ieoffset) |
| { |
| int len; |
| const u8 *next, *end = skb->data + skb->len; |
| u8 *ie = (u8 *)cfg80211_find_ie(eid, skb->data + ieoffset, |
| skb->len - ieoffset); |
| if (!ie) |
| return; |
| len = ie[1] + 2; |
| next = ie + len; |
| memmove(ie, next, end - next); |
| skb_trim(skb, skb->len - len); |
| } |
| |
| static void wl12xx_remove_vendor_ie(struct sk_buff *skb, |
| unsigned int oui, u8 oui_type, |
| int ieoffset) |
| { |
| int len; |
| const u8 *next, *end = skb->data + skb->len; |
| u8 *ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type, |
| skb->data + ieoffset, |
| skb->len - ieoffset); |
| if (!ie) |
| return; |
| len = ie[1] + 2; |
| next = ie + len; |
| memmove(ie, next, end - next); |
| skb_trim(skb, skb->len - len); |
| } |
| |
| static int wl1271_ap_set_probe_resp_tmpl(struct wl1271 *wl, u32 rates, |
| struct ieee80211_vif *vif) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct sk_buff *skb; |
| int ret; |
| |
| skb = ieee80211_proberesp_get(wl->hw, vif); |
| if (!skb) |
| return -EOPNOTSUPP; |
| |
| ret = wl1271_cmd_template_set(wl, wlvif->role_id, |
| CMD_TEMPL_AP_PROBE_RESPONSE, |
| skb->data, |
| skb->len, 0, |
| rates); |
| dev_kfree_skb(skb); |
| |
| if (ret < 0) |
| goto out; |
| |
| wl1271_debug(DEBUG_AP, "probe response updated"); |
| set_bit(WLVIF_FLAG_AP_PROBE_RESP_SET, &wlvif->flags); |
| |
| out: |
| return ret; |
| } |
| |
| static int wl1271_ap_set_probe_resp_tmpl_legacy(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| u8 *probe_rsp_data, |
| size_t probe_rsp_len, |
| u32 rates) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; |
| u8 probe_rsp_templ[WL1271_CMD_TEMPL_MAX_SIZE]; |
| int ssid_ie_offset, ie_offset, templ_len; |
| const u8 *ptr; |
| |
| /* no need to change probe response if the SSID is set correctly */ |
| if (wlvif->ssid_len > 0) |
| return wl1271_cmd_template_set(wl, wlvif->role_id, |
| CMD_TEMPL_AP_PROBE_RESPONSE, |
| probe_rsp_data, |
| probe_rsp_len, 0, |
| rates); |
| |
| if (probe_rsp_len + bss_conf->ssid_len > WL1271_CMD_TEMPL_MAX_SIZE) { |
| wl1271_error("probe_rsp template too big"); |
| return -EINVAL; |
| } |
| |
| /* start searching from IE offset */ |
| ie_offset = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); |
| |
| ptr = cfg80211_find_ie(WLAN_EID_SSID, probe_rsp_data + ie_offset, |
| probe_rsp_len - ie_offset); |
| if (!ptr) { |
| wl1271_error("No SSID in beacon!"); |
| return -EINVAL; |
| } |
| |
| ssid_ie_offset = ptr - probe_rsp_data; |
| ptr += (ptr[1] + 2); |
| |
| memcpy(probe_rsp_templ, probe_rsp_data, ssid_ie_offset); |
| |
| /* insert SSID from bss_conf */ |
| probe_rsp_templ[ssid_ie_offset] = WLAN_EID_SSID; |
| probe_rsp_templ[ssid_ie_offset + 1] = bss_conf->ssid_len; |
| memcpy(probe_rsp_templ + ssid_ie_offset + 2, |
| bss_conf->ssid, bss_conf->ssid_len); |
| templ_len = ssid_ie_offset + 2 + bss_conf->ssid_len; |
| |
| memcpy(probe_rsp_templ + ssid_ie_offset + 2 + bss_conf->ssid_len, |
| ptr, probe_rsp_len - (ptr - probe_rsp_data)); |
| templ_len += probe_rsp_len - (ptr - probe_rsp_data); |
| |
| return wl1271_cmd_template_set(wl, wlvif->role_id, |
| CMD_TEMPL_AP_PROBE_RESPONSE, |
| probe_rsp_templ, |
| templ_len, 0, |
| rates); |
| } |
| |
| static int wl1271_bss_erp_info_changed(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret = 0; |
| |
| if (changed & BSS_CHANGED_ERP_SLOT) { |
| if (bss_conf->use_short_slot) |
| ret = wl1271_acx_slot(wl, wlvif, SLOT_TIME_SHORT); |
| else |
| ret = wl1271_acx_slot(wl, wlvif, SLOT_TIME_LONG); |
| if (ret < 0) { |
| wl1271_warning("Set slot time failed %d", ret); |
| goto out; |
| } |
| } |
| |
| if (changed & BSS_CHANGED_ERP_PREAMBLE) { |
| if (bss_conf->use_short_preamble) |
| wl1271_acx_set_preamble(wl, wlvif, ACX_PREAMBLE_SHORT); |
| else |
| wl1271_acx_set_preamble(wl, wlvif, ACX_PREAMBLE_LONG); |
| } |
| |
| if (changed & BSS_CHANGED_ERP_CTS_PROT) { |
| if (bss_conf->use_cts_prot) |
| ret = wl1271_acx_cts_protect(wl, wlvif, |
| CTSPROTECT_ENABLE); |
| else |
| ret = wl1271_acx_cts_protect(wl, wlvif, |
| CTSPROTECT_DISABLE); |
| if (ret < 0) { |
| wl1271_warning("Set ctsprotect failed %d", ret); |
| goto out; |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static int wlcore_set_beacon_template(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| bool is_ap) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct ieee80211_hdr *hdr; |
| u32 min_rate; |
| int ret; |
| int ieoffset = offsetof(struct ieee80211_mgmt, u.beacon.variable); |
| struct sk_buff *beacon = ieee80211_beacon_get(wl->hw, vif); |
| u16 tmpl_id; |
| |
| if (!beacon) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| wl1271_debug(DEBUG_MASTER, "beacon updated"); |
| |
| ret = wl1271_ssid_set(wlvif, beacon, ieoffset); |
| if (ret < 0) { |
| dev_kfree_skb(beacon); |
| goto out; |
| } |
| min_rate = wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); |
| tmpl_id = is_ap ? CMD_TEMPL_AP_BEACON : |
| CMD_TEMPL_BEACON; |
| ret = wl1271_cmd_template_set(wl, wlvif->role_id, tmpl_id, |
| beacon->data, |
| beacon->len, 0, |
| min_rate); |
| if (ret < 0) { |
| dev_kfree_skb(beacon); |
| goto out; |
| } |
| |
| wlvif->wmm_enabled = |
| cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, |
| WLAN_OUI_TYPE_MICROSOFT_WMM, |
| beacon->data + ieoffset, |
| beacon->len - ieoffset); |
| |
| /* |
| * In case we already have a probe-resp beacon set explicitly |
| * by usermode, don't use the beacon data. |
| */ |
| if (test_bit(WLVIF_FLAG_AP_PROBE_RESP_SET, &wlvif->flags)) |
| goto end_bcn; |
| |
| /* remove TIM ie from probe response */ |
| wl12xx_remove_ie(beacon, WLAN_EID_TIM, ieoffset); |
| |
| /* |
| * remove p2p ie from probe response. |
| * the fw reponds to probe requests that don't include |
| * the p2p ie. probe requests with p2p ie will be passed, |
| * and will be responded by the supplicant (the spec |
| * forbids including the p2p ie when responding to probe |
| * requests that didn't include it). |
| */ |
| wl12xx_remove_vendor_ie(beacon, WLAN_OUI_WFA, |
| WLAN_OUI_TYPE_WFA_P2P, ieoffset); |
| |
| hdr = (struct ieee80211_hdr *) beacon->data; |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_PROBE_RESP); |
| if (is_ap) |
| ret = wl1271_ap_set_probe_resp_tmpl_legacy(wl, vif, |
| beacon->data, |
| beacon->len, |
| min_rate); |
| else |
| ret = wl1271_cmd_template_set(wl, wlvif->role_id, |
| CMD_TEMPL_PROBE_RESPONSE, |
| beacon->data, |
| beacon->len, 0, |
| min_rate); |
| end_bcn: |
| dev_kfree_skb(beacon); |
| if (ret < 0) |
| goto out; |
| |
| out: |
| return ret; |
| } |
| |
| static int wl1271_bss_beacon_info_changed(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); |
| int ret = 0; |
| |
| if (changed & BSS_CHANGED_BEACON_INT) { |
| wl1271_debug(DEBUG_MASTER, "beacon interval updated: %d", |
| bss_conf->beacon_int); |
| |
| wlvif->beacon_int = bss_conf->beacon_int; |
| } |
| |
| if ((changed & BSS_CHANGED_AP_PROBE_RESP) && is_ap) { |
| u32 rate = wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); |
| |
| wl1271_ap_set_probe_resp_tmpl(wl, rate, vif); |
| } |
| |
| if (changed & BSS_CHANGED_BEACON) { |
| ret = wlcore_set_beacon_template(wl, vif, is_ap); |
| if (ret < 0) |
| goto out; |
| } |
| |
| out: |
| if (ret != 0) |
| wl1271_error("beacon info change failed: %d", ret); |
| return ret; |
| } |
| |
| /* AP mode changes */ |
| static void wl1271_bss_info_changed_ap(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret = 0; |
| |
| if (changed & BSS_CHANGED_BASIC_RATES) { |
| u32 rates = bss_conf->basic_rates; |
| |
| wlvif->basic_rate_set = wl1271_tx_enabled_rates_get(wl, rates, |
| wlvif->band); |
| wlvif->basic_rate = wl1271_tx_min_rate_get(wl, |
| wlvif->basic_rate_set); |
| |
| ret = wl1271_init_ap_rates(wl, wlvif); |
| if (ret < 0) { |
| wl1271_error("AP rate policy change failed %d", ret); |
| goto out; |
| } |
| |
| ret = wl1271_ap_init_templates(wl, vif); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_ap_set_probe_resp_tmpl(wl, wlvif->basic_rate, vif); |
| if (ret < 0) |
| goto out; |
| |
| ret = wlcore_set_beacon_template(wl, vif, true); |
| if (ret < 0) |
| goto out; |
| } |
| |
| ret = wl1271_bss_beacon_info_changed(wl, vif, bss_conf, changed); |
| if (ret < 0) |
| goto out; |
| |
| if (changed & BSS_CHANGED_BEACON_ENABLED) { |
| if (bss_conf->enable_beacon) { |
| if (!test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) { |
| ret = wl12xx_cmd_role_start_ap(wl, wlvif); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_ap_init_hwenc(wl, wlvif); |
| if (ret < 0) |
| goto out; |
| |
| set_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags); |
| wl1271_debug(DEBUG_AP, "started AP"); |
| } |
| } else { |
| if (test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) { |
| /* |
| * AP might be in ROC in case we have just |
| * sent auth reply. handle it. |
| */ |
| if (test_bit(wlvif->role_id, wl->roc_map)) |
| wl12xx_croc(wl, wlvif->role_id); |
| |
| ret = wl12xx_cmd_role_stop_ap(wl, wlvif); |
| if (ret < 0) |
| goto out; |
| |
| clear_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags); |
| clear_bit(WLVIF_FLAG_AP_PROBE_RESP_SET, |
| &wlvif->flags); |
| wl1271_debug(DEBUG_AP, "stopped AP"); |
| } |
| } |
| } |
| |
| ret = wl1271_bss_erp_info_changed(wl, vif, bss_conf, changed); |
| if (ret < 0) |
| goto out; |
| |
| /* Handle HT information change */ |
| if ((changed & BSS_CHANGED_HT) && |
| (bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT)) { |
| ret = wl1271_acx_set_ht_information(wl, wlvif, |
| bss_conf->ht_operation_mode); |
| if (ret < 0) { |
| wl1271_warning("Set ht information failed %d", ret); |
| goto out; |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| static int wlcore_set_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 sta_rate_set) |
| { |
| u32 rates; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, |
| "changed_bssid: %pM, aid: %d, bcn_int: %d, brates: 0x%x sta_rate_set: 0x%x", |
| bss_conf->bssid, bss_conf->aid, |
| bss_conf->beacon_int, |
| bss_conf->basic_rates, sta_rate_set); |
| |
| wlvif->beacon_int = bss_conf->beacon_int; |
| rates = bss_conf->basic_rates; |
| wlvif->basic_rate_set = |
| wl1271_tx_enabled_rates_get(wl, rates, |
| wlvif->band); |
| wlvif->basic_rate = |
| wl1271_tx_min_rate_get(wl, |
| wlvif->basic_rate_set); |
| |
| if (sta_rate_set) |
| wlvif->rate_set = |
| wl1271_tx_enabled_rates_get(wl, |
| sta_rate_set, |
| wlvif->band); |
| |
| /* we only support sched_scan while not connected */ |
| if (wl->sched_vif == wlvif) |
| wl->ops->sched_scan_stop(wl, wlvif); |
| |
| ret = wl1271_acx_sta_rate_policies(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl12xx_cmd_build_null_data(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_build_qos_null_data(wl, wl12xx_wlvif_to_vif(wlvif)); |
| if (ret < 0) |
| return ret; |
| |
| wlcore_set_ssid(wl, wlvif); |
| |
| set_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); |
| |
| return 0; |
| } |
| |
| static int wlcore_clear_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| int ret; |
| |
| /* revert back to minimum rates for the current band */ |
| wl1271_set_band_rate(wl, wlvif); |
| wlvif->basic_rate = wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); |
| |
| ret = wl1271_acx_sta_rate_policies(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS && |
| test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) { |
| ret = wl12xx_cmd_role_stop_sta(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| } |
| |
| clear_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); |
| return 0; |
| } |
| /* STA/IBSS mode changes */ |
| static void wl1271_bss_info_changed_sta(struct wl1271 *wl, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| bool do_join = false; |
| bool is_ibss = (wlvif->bss_type == BSS_TYPE_IBSS); |
| bool ibss_joined = false; |
| u32 sta_rate_set = 0; |
| int ret; |
| struct ieee80211_sta *sta; |
| bool sta_exists = false; |
| struct ieee80211_sta_ht_cap sta_ht_cap; |
| |
| if (is_ibss) { |
| ret = wl1271_bss_beacon_info_changed(wl, vif, bss_conf, |
| changed); |
| if (ret < 0) |
| goto out; |
| } |
| |
| if (changed & BSS_CHANGED_IBSS) { |
| if (bss_conf->ibss_joined) { |
| set_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags); |
| ibss_joined = true; |
| } else { |
| wlcore_unset_assoc(wl, wlvif); |
| wl12xx_cmd_role_stop_sta(wl, wlvif); |
| } |
| } |
| |
| if ((changed & BSS_CHANGED_BEACON_INT) && ibss_joined) |
| do_join = true; |
| |
| /* Need to update the SSID (for filtering etc) */ |
| if ((changed & BSS_CHANGED_BEACON) && ibss_joined) |
| do_join = true; |
| |
| if ((changed & BSS_CHANGED_BEACON_ENABLED) && ibss_joined) { |
| wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s", |
| bss_conf->enable_beacon ? "enabled" : "disabled"); |
| |
| do_join = true; |
| } |
| |
| if (changed & BSS_CHANGED_IDLE && !is_ibss) |
| wl1271_sta_handle_idle(wl, wlvif, bss_conf->idle); |
| |
| if (changed & BSS_CHANGED_CQM) { |
| bool enable = false; |
| if (bss_conf->cqm_rssi_thold) |
| enable = true; |
| ret = wl1271_acx_rssi_snr_trigger(wl, wlvif, enable, |
| bss_conf->cqm_rssi_thold, |
| bss_conf->cqm_rssi_hyst); |
| if (ret < 0) |
| goto out; |
| wlvif->rssi_thold = bss_conf->cqm_rssi_thold; |
| } |
| |
| if (changed & (BSS_CHANGED_BSSID | BSS_CHANGED_HT | |
| BSS_CHANGED_ASSOC)) { |
| rcu_read_lock(); |
| sta = ieee80211_find_sta(vif, bss_conf->bssid); |
| if (sta) { |
| u8 *rx_mask = sta->ht_cap.mcs.rx_mask; |
| |
| /* save the supp_rates of the ap */ |
| sta_rate_set = sta->supp_rates[wlvif->band]; |
| if (sta->ht_cap.ht_supported) |
| sta_rate_set |= |
| (rx_mask[0] << HW_HT_RATES_OFFSET) | |
| (rx_mask[1] << HW_MIMO_RATES_OFFSET); |
| sta_ht_cap = sta->ht_cap; |
| sta_exists = true; |
| } |
| |
| rcu_read_unlock(); |
| } |
| |
| if (changed & BSS_CHANGED_BSSID) { |
| if (!is_zero_ether_addr(bss_conf->bssid)) { |
| ret = wlcore_set_bssid(wl, wlvif, bss_conf, |
| sta_rate_set); |
| if (ret < 0) |
| goto out; |
| |
| /* Need to update the BSSID (for filtering etc) */ |
| do_join = true; |
| } else { |
| ret = wlcore_clear_bssid(wl, wlvif); |
| if (ret < 0) |
| goto out; |
| } |
| } |
| |
| if (changed & BSS_CHANGED_IBSS) { |
| wl1271_debug(DEBUG_ADHOC, "ibss_joined: %d", |
| bss_conf->ibss_joined); |
| |
| if (bss_conf->ibss_joined) { |
| u32 rates = bss_conf->basic_rates; |
| wlvif->basic_rate_set = |
| wl1271_tx_enabled_rates_get(wl, rates, |
| wlvif->band); |
| wlvif->basic_rate = |
| wl1271_tx_min_rate_get(wl, |
| wlvif->basic_rate_set); |
| |
| /* by default, use 11b + OFDM rates */ |
| wlvif->rate_set = CONF_TX_IBSS_DEFAULT_RATES; |
| ret = wl1271_acx_sta_rate_policies(wl, wlvif); |
| if (ret < 0) |
| goto out; |
| } |
| } |
| |
| if ((changed & BSS_CHANGED_BEACON_INFO) && bss_conf->dtim_period) { |
| /* enable beacon filtering */ |
| ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true); |
| if (ret < 0) |
| goto out; |
| } |
| |
| ret = wl1271_bss_erp_info_changed(wl, vif, bss_conf, changed); |
| if (ret < 0) |
| goto out; |
| |
| if (do_join) { |
| ret = wlcore_join(wl, wlvif); |
| if (ret < 0) { |
| wl1271_warning("cmd join failed %d", ret); |
| goto out; |
| } |
| } |
| |
| if (changed & BSS_CHANGED_ASSOC) { |
| if (bss_conf->assoc) { |
| ret = wlcore_set_assoc(wl, wlvif, bss_conf, |
| sta_rate_set); |
| if (ret < 0) |
| goto out; |
| |
| if (test_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags)) |
| wl12xx_set_authorized(wl, wlvif); |
| } else { |
| wlcore_unset_assoc(wl, wlvif); |
| } |
| } |
| |
| if (changed & BSS_CHANGED_PS) { |
| if ((bss_conf->ps) && |
| test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) && |
| !test_bit(WLVIF_FLAG_IN_PS, &wlvif->flags)) { |
| int ps_mode; |
| char *ps_mode_str; |
| |
| if (wl->conf.conn.forced_ps) { |
| ps_mode = STATION_POWER_SAVE_MODE; |
| ps_mode_str = "forced"; |
| } else { |
| ps_mode = STATION_AUTO_PS_MODE; |
| ps_mode_str = "auto"; |
| } |
| |
| wl1271_debug(DEBUG_PSM, "%s ps enabled", ps_mode_str); |
| |
| ret = wl1271_ps_set_mode(wl, wlvif, ps_mode); |
| if (ret < 0) |
| wl1271_warning("enter %s ps failed %d", |
| ps_mode_str, ret); |
| } else if (!bss_conf->ps && |
| test_bit(WLVIF_FLAG_IN_PS, &wlvif->flags)) { |
| wl1271_debug(DEBUG_PSM, "auto ps disabled"); |
| |
| ret = wl1271_ps_set_mode(wl, wlvif, |
| STATION_ACTIVE_MODE); |
| if (ret < 0) |
| wl1271_warning("exit auto ps failed %d", ret); |
| } |
| } |
| |
| /* Handle new association with HT. Do this after join. */ |
| if (sta_exists) { |
| bool enabled = |
| bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; |
| |
| ret = wlcore_hw_set_peer_cap(wl, |
| &sta_ht_cap, |
| enabled, |
| wlvif->rate_set, |
| wlvif->sta.hlid); |
| if (ret < 0) { |
| wl1271_warning("Set ht cap failed %d", ret); |
| goto out; |
| |
| } |
| |
| if (enabled) { |
| ret = wl1271_acx_set_ht_information(wl, wlvif, |
| bss_conf->ht_operation_mode); |
| if (ret < 0) { |
| wl1271_warning("Set ht information failed %d", |
| ret); |
| goto out; |
| } |
| } |
| } |
| |
| /* Handle arp filtering. Done after join. */ |
| if ((changed & BSS_CHANGED_ARP_FILTER) || |
| (!is_ibss && (changed & BSS_CHANGED_QOS))) { |
| __be32 addr = bss_conf->arp_addr_list[0]; |
| wlvif->sta.qos = bss_conf->qos; |
| WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS); |
| |
| if (bss_conf->arp_addr_cnt == 1 && bss_conf->assoc) { |
| wlvif->ip_addr = addr; |
| /* |
| * The template should have been configured only upon |
| * association. however, it seems that the correct ip |
| * isn't being set (when sending), so we have to |
| * reconfigure the template upon every ip change. |
| */ |
| ret = wl1271_cmd_build_arp_rsp(wl, wlvif); |
| if (ret < 0) { |
| wl1271_warning("build arp rsp failed: %d", ret); |
| goto out; |
| } |
| |
| ret = wl1271_acx_arp_ip_filter(wl, wlvif, |
| (ACX_ARP_FILTER_ARP_FILTERING | |
| ACX_ARP_FILTER_AUTO_ARP), |
| addr); |
| } else { |
| wlvif->ip_addr = 0; |
| ret = wl1271_acx_arp_ip_filter(wl, wlvif, 0, addr); |
| } |
| |
| if (ret < 0) |
| goto out; |
| } |
| |
| out: |
| return; |
| } |
| |
| static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 bss info role %d changed 0x%x", |
| wlvif->role_id, (int)changed); |
| |
| /* |
| * make sure to cancel pending disconnections if our association |
| * state changed |
| */ |
| if (!is_ap && (changed & BSS_CHANGED_ASSOC)) |
| cancel_delayed_work_sync(&wlvif->connection_loss_work); |
| |
| if (is_ap && (changed & BSS_CHANGED_BEACON_ENABLED) && |
| !bss_conf->enable_beacon) |
| wl1271_tx_flush(wl); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| if (unlikely(!test_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags))) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| if ((changed & BSS_CHANGED_TXPOWER) && |
| bss_conf->txpower != wlvif->power_level) { |
| |
| ret = wl1271_acx_tx_power(wl, wlvif, bss_conf->txpower); |
| if (ret < 0) |
| goto out; |
| |
| wlvif->power_level = bss_conf->txpower; |
| } |
| |
| if (is_ap) |
| wl1271_bss_info_changed_ap(wl, vif, bss_conf, changed); |
| else |
| wl1271_bss_info_changed_sta(wl, vif, bss_conf, changed); |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int wlcore_op_add_chanctx(struct ieee80211_hw *hw, |
| struct ieee80211_chanctx_conf *ctx) |
| { |
| wl1271_debug(DEBUG_MAC80211, "mac80211 add chanctx %d (type %d)", |
| ieee80211_frequency_to_channel(ctx->def.chan->center_freq), |
| cfg80211_get_chandef_type(&ctx->def)); |
| return 0; |
| } |
| |
| static void wlcore_op_remove_chanctx(struct ieee80211_hw *hw, |
| struct ieee80211_chanctx_conf *ctx) |
| { |
| wl1271_debug(DEBUG_MAC80211, "mac80211 remove chanctx %d (type %d)", |
| ieee80211_frequency_to_channel(ctx->def.chan->center_freq), |
| cfg80211_get_chandef_type(&ctx->def)); |
| } |
| |
| static void wlcore_op_change_chanctx(struct ieee80211_hw *hw, |
| struct ieee80211_chanctx_conf *ctx, |
| u32 changed) |
| { |
| wl1271_debug(DEBUG_MAC80211, |
| "mac80211 change chanctx %d (type %d) changed 0x%x", |
| ieee80211_frequency_to_channel(ctx->def.chan->center_freq), |
| cfg80211_get_chandef_type(&ctx->def), changed); |
| } |
| |
| static int wlcore_op_assign_vif_chanctx(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_chanctx_conf *ctx) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int channel = ieee80211_frequency_to_channel( |
| ctx->def.chan->center_freq); |
| |
| wl1271_debug(DEBUG_MAC80211, |
| "mac80211 assign chanctx (role %d) %d (type %d)", |
| wlvif->role_id, channel, cfg80211_get_chandef_type(&ctx->def)); |
| |
| mutex_lock(&wl->mutex); |
| |
| wlvif->band = ctx->def.chan->band; |
| wlvif->channel = channel; |
| wlvif->channel_type = cfg80211_get_chandef_type(&ctx->def); |
| |
| /* update default rates according to the band */ |
| wl1271_set_band_rate(wl, wlvif); |
| |
| mutex_unlock(&wl->mutex); |
| |
| return 0; |
| } |
| |
| static void wlcore_op_unassign_vif_chanctx(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_chanctx_conf *ctx) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| |
| wl1271_debug(DEBUG_MAC80211, |
| "mac80211 unassign chanctx (role %d) %d (type %d)", |
| wlvif->role_id, |
| ieee80211_frequency_to_channel(ctx->def.chan->center_freq), |
| cfg80211_get_chandef_type(&ctx->def)); |
| |
| wl1271_tx_flush(wl); |
| } |
| |
| static int wl1271_op_conf_tx(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, u16 queue, |
| const struct ieee80211_tx_queue_params *params) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| u8 ps_scheme; |
| int ret = 0; |
| |
| mutex_lock(&wl->mutex); |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue); |
| |
| if (params->uapsd) |
| ps_scheme = CONF_PS_SCHEME_UPSD_TRIGGER; |
| else |
| ps_scheme = CONF_PS_SCHEME_LEGACY; |
| |
| if (!test_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* |
| * the txop is confed in units of 32us by the mac80211, |
| * we need us |
| */ |
| ret = wl1271_acx_ac_cfg(wl, wlvif, wl1271_tx_get_queue(queue), |
| params->cw_min, params->cw_max, |
| params->aifs, params->txop << 5); |
| if (ret < 0) |
| goto out_sleep; |
| |
| ret = wl1271_acx_tid_cfg(wl, wlvif, wl1271_tx_get_queue(queue), |
| CONF_CHANNEL_TYPE_EDCF, |
| wl1271_tx_get_queue(queue), |
| ps_scheme, CONF_ACK_POLICY_LEGACY, |
| 0, 0); |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static u64 wl1271_op_get_tsf(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| u64 mactime = ULLONG_MAX; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 get tsf"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl12xx_acx_tsf_info(wl, wlvif, &mactime); |
| if (ret < 0) |
| goto out_sleep; |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| return mactime; |
| } |
| |
| static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx, |
| struct survey_info *survey) |
| { |
| struct ieee80211_conf *conf = &hw->conf; |
| |
| if (idx != 0) |
| return -ENOENT; |
| |
| survey->channel = conf->chandef.chan; |
| survey->filled = 0; |
| return 0; |
| } |
| |
| static int wl1271_allocate_sta(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct ieee80211_sta *sta) |
| { |
| struct wl1271_station *wl_sta; |
| int ret; |
| |
| |
| if (wl->active_sta_count >= wl->max_ap_stations) { |
| wl1271_warning("could not allocate HLID - too much stations"); |
| return -EBUSY; |
| } |
| |
| wl_sta = (struct wl1271_station *)sta->drv_priv; |
| ret = wl12xx_allocate_link(wl, wlvif, &wl_sta->hlid); |
| if (ret < 0) { |
| wl1271_warning("could not allocate HLID - too many links"); |
| return -EBUSY; |
| } |
| |
| /* use the previous security seq, if this is a recovery/resume */ |
| wl->links[wl_sta->hlid].total_freed_pkts = wl_sta->total_freed_pkts; |
| |
| set_bit(wl_sta->hlid, wlvif->ap.sta_hlid_map); |
| memcpy(wl->links[wl_sta->hlid].addr, sta->addr, ETH_ALEN); |
| wl->active_sta_count++; |
| return 0; |
| } |
| |
| void wl1271_free_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid) |
| { |
| struct wl1271_station *wl_sta; |
| struct ieee80211_sta *sta; |
| struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); |
| |
| if (!test_bit(hlid, wlvif->ap.sta_hlid_map)) |
| return; |
| |
| clear_bit(hlid, wlvif->ap.sta_hlid_map); |
| __clear_bit(hlid, &wl->ap_ps_map); |
| __clear_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map); |
| |
| /* |
| * save the last used PN in the private part of iee80211_sta, |
| * in case of recovery/suspend |
| */ |
| rcu_read_lock(); |
| sta = ieee80211_find_sta(vif, wl->links[hlid].addr); |
| if (sta) { |
| wl_sta = (void *)sta->drv_priv; |
| wl_sta->total_freed_pkts = wl->links[hlid].total_freed_pkts; |
| |
| /* |
| * increment the initial seq number on recovery to account for |
| * transmitted packets that we haven't yet got in the FW status |
| */ |
| if (test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) |
| wl_sta->total_freed_pkts += |
| WL1271_TX_SQN_POST_RECOVERY_PADDING; |
| } |
| rcu_read_unlock(); |
| |
| wl12xx_free_link(wl, wlvif, &hlid); |
| wl->active_sta_count--; |
| |
| /* |
| * rearm the tx watchdog when the last STA is freed - give the FW a |
| * chance to return STA-buffered packets before complaining. |
| */ |
| if (wl->active_sta_count == 0) |
| wl12xx_rearm_tx_watchdog_locked(wl); |
| } |
| |
| static int wl12xx_sta_add(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct ieee80211_sta *sta) |
| { |
| struct wl1271_station *wl_sta; |
| int ret = 0; |
| u8 hlid; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 add sta %d", (int)sta->aid); |
| |
| ret = wl1271_allocate_sta(wl, wlvif, sta); |
| if (ret < 0) |
| return ret; |
| |
| wl_sta = (struct wl1271_station *)sta->drv_priv; |
| hlid = wl_sta->hlid; |
| |
| ret = wl12xx_cmd_add_peer(wl, wlvif, sta, hlid); |
| if (ret < 0) |
| wl1271_free_sta(wl, wlvif, hlid); |
| |
| return ret; |
| } |
| |
| static int wl12xx_sta_remove(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct ieee80211_sta *sta) |
| { |
| struct wl1271_station *wl_sta; |
| int ret = 0, id; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 remove sta %d", (int)sta->aid); |
| |
| wl_sta = (struct wl1271_station *)sta->drv_priv; |
| id = wl_sta->hlid; |
| if (WARN_ON(!test_bit(id, wlvif->ap.sta_hlid_map))) |
| return -EINVAL; |
| |
| ret = wl12xx_cmd_remove_peer(wl, wlvif, wl_sta->hlid); |
| if (ret < 0) |
| return ret; |
| |
| wl1271_free_sta(wl, wlvif, wl_sta->hlid); |
| return ret; |
| } |
| |
| static void wlcore_roc_if_possible(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif) |
| { |
| if (find_first_bit(wl->roc_map, |
| WL12XX_MAX_ROLES) < WL12XX_MAX_ROLES) |
| return; |
| |
| if (WARN_ON(wlvif->role_id == WL12XX_INVALID_ROLE_ID)) |
| return; |
| |
| wl12xx_roc(wl, wlvif, wlvif->role_id, wlvif->band, wlvif->channel); |
| } |
| |
| /* |
| * when wl_sta is NULL, we treat this call as if coming from a |
| * pending auth reply. |
| * wl->mutex must be taken and the FW must be awake when the call |
| * takes place. |
| */ |
| void wlcore_update_inconn_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| struct wl1271_station *wl_sta, bool in_conn) |
| { |
| if (in_conn) { |
| if (WARN_ON(wl_sta && wl_sta->in_connection)) |
| return; |
| |
| if (!wlvif->ap_pending_auth_reply && |
| !wlvif->inconn_count) |
| wlcore_roc_if_possible(wl, wlvif); |
| |
| if (wl_sta) { |
| wl_sta->in_connection = true; |
| wlvif->inconn_count++; |
| } else { |
| wlvif->ap_pending_auth_reply = true; |
| } |
| } else { |
| if (wl_sta && !wl_sta->in_connection) |
| return; |
| |
| if (WARN_ON(!wl_sta && !wlvif->ap_pending_auth_reply)) |
| return; |
| |
| if (WARN_ON(wl_sta && !wlvif->inconn_count)) |
| return; |
| |
| if (wl_sta) { |
| wl_sta->in_connection = false; |
| wlvif->inconn_count--; |
| } else { |
| wlvif->ap_pending_auth_reply = false; |
| } |
| |
| if (!wlvif->inconn_count && !wlvif->ap_pending_auth_reply && |
| test_bit(wlvif->role_id, wl->roc_map)) |
| wl12xx_croc(wl, wlvif->role_id); |
| } |
| } |
| |
| static int wl12xx_update_sta_state(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct ieee80211_sta *sta, |
| enum ieee80211_sta_state old_state, |
| enum ieee80211_sta_state new_state) |
| { |
| struct wl1271_station *wl_sta; |
| bool is_ap = wlvif->bss_type == BSS_TYPE_AP_BSS; |
| bool is_sta = wlvif->bss_type == BSS_TYPE_STA_BSS; |
| int ret; |
| |
| wl_sta = (struct wl1271_station *)sta->drv_priv; |
| |
| /* Add station (AP mode) */ |
| if (is_ap && |
| old_state == IEEE80211_STA_NOTEXIST && |
| new_state == IEEE80211_STA_NONE) { |
| ret = wl12xx_sta_add(wl, wlvif, sta); |
| if (ret) |
| return ret; |
| |
| wlcore_update_inconn_sta(wl, wlvif, wl_sta, true); |
| } |
| |
| /* Remove station (AP mode) */ |
| if (is_ap && |
| old_state == IEEE80211_STA_NONE && |
| new_state == IEEE80211_STA_NOTEXIST) { |
| /* must not fail */ |
| wl12xx_sta_remove(wl, wlvif, sta); |
| |
| wlcore_update_inconn_sta(wl, wlvif, wl_sta, false); |
| } |
| |
| /* Authorize station (AP mode) */ |
| if (is_ap && |
| new_state == IEEE80211_STA_AUTHORIZED) { |
| ret = wl12xx_cmd_set_peer_state(wl, wlvif, wl_sta->hlid); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true, |
| wl_sta->hlid); |
| if (ret) |
| return ret; |
| |
| wlcore_update_inconn_sta(wl, wlvif, wl_sta, false); |
| } |
| |
| /* Authorize station */ |
| if (is_sta && |
| new_state == IEEE80211_STA_AUTHORIZED) { |
| set_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags); |
| ret = wl12xx_set_authorized(wl, wlvif); |
| if (ret) |
| return ret; |
| } |
| |
| if (is_sta && |
| old_state == IEEE80211_STA_AUTHORIZED && |
| new_state == IEEE80211_STA_ASSOC) { |
| clear_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags); |
| clear_bit(WLVIF_FLAG_STA_STATE_SENT, &wlvif->flags); |
| } |
| |
| /* clear ROCs on failure or authorization */ |
| if (is_sta && |
| (new_state == IEEE80211_STA_AUTHORIZED || |
| new_state == IEEE80211_STA_NOTEXIST)) { |
| if (test_bit(wlvif->role_id, wl->roc_map)) |
| wl12xx_croc(wl, wlvif->role_id); |
| } |
| |
| if (is_sta && |
| old_state == IEEE80211_STA_NOTEXIST && |
| new_state == IEEE80211_STA_NONE) { |
| if (find_first_bit(wl->roc_map, |
| WL12XX_MAX_ROLES) >= WL12XX_MAX_ROLES) { |
| WARN_ON(wlvif->role_id == WL12XX_INVALID_ROLE_ID); |
| wl12xx_roc(wl, wlvif, wlvif->role_id, |
| wlvif->band, wlvif->channel); |
| } |
| } |
| return 0; |
| } |
| |
| static int wl12xx_op_sta_state(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| enum ieee80211_sta_state old_state, |
| enum ieee80211_sta_state new_state) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 sta %d state=%d->%d", |
| sta->aid, old_state, new_state); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl12xx_update_sta_state(wl, wlvif, sta, old_state, new_state); |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| if (new_state < old_state) |
| return 0; |
| return ret; |
| } |
| |
| static int wl1271_op_ampdu_action(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum ieee80211_ampdu_mlme_action action, |
| struct ieee80211_sta *sta, u16 tid, u16 *ssn, |
| u8 buf_size) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret; |
| u8 hlid, *ba_bitmap; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 ampdu action %d tid %d", action, |
| tid); |
| |
| /* sanity check - the fields in FW are only 8bits wide */ |
| if (WARN_ON(tid > 0xFF)) |
| return -ENOTSUPP; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS) { |
| hlid = wlvif->sta.hlid; |
| } else if (wlvif->bss_type == BSS_TYPE_AP_BSS) { |
| struct wl1271_station *wl_sta; |
| |
| wl_sta = (struct wl1271_station *)sta->drv_priv; |
| hlid = wl_sta->hlid; |
| } else { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ba_bitmap = &wl->links[hlid].ba_bitmap; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 ampdu: Rx tid %d action %d", |
| tid, action); |
| |
| switch (action) { |
| case IEEE80211_AMPDU_RX_START: |
| if (!wlvif->ba_support || !wlvif->ba_allowed) { |
| ret = -ENOTSUPP; |
| break; |
| } |
| |
| if (wl->ba_rx_session_count >= wl->ba_rx_session_count_max) { |
| ret = -EBUSY; |
| wl1271_error("exceeded max RX BA sessions"); |
| break; |
| } |
| |
| if (*ba_bitmap & BIT(tid)) { |
| ret = -EINVAL; |
| wl1271_error("cannot enable RX BA session on active " |
| "tid: %d", tid); |
| break; |
| } |
| |
| ret = wl12xx_acx_set_ba_receiver_session(wl, tid, *ssn, true, |
| hlid); |
| if (!ret) { |
| *ba_bitmap |= BIT(tid); |
| wl->ba_rx_session_count++; |
| } |
| break; |
| |
| case IEEE80211_AMPDU_RX_STOP: |
| if (!(*ba_bitmap & BIT(tid))) { |
| /* |
| * this happens on reconfig - so only output a debug |
| * message for now, and don't fail the function. |
| */ |
| wl1271_debug(DEBUG_MAC80211, |
| "no active RX BA session on tid: %d", |
| tid); |
| ret = 0; |
| break; |
| } |
| |
| ret = wl12xx_acx_set_ba_receiver_session(wl, tid, 0, false, |
| hlid); |
| if (!ret) { |
| *ba_bitmap &= ~BIT(tid); |
| wl->ba_rx_session_count--; |
| } |
| break; |
| |
| /* |
| * The BA initiator session management in FW independently. |
| * Falling break here on purpose for all TX APDU commands. |
| */ |
| case IEEE80211_AMPDU_TX_START: |
| case IEEE80211_AMPDU_TX_STOP_CONT: |
| case IEEE80211_AMPDU_TX_STOP_FLUSH: |
| case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: |
| case IEEE80211_AMPDU_TX_OPERATIONAL: |
| ret = -EINVAL; |
| break; |
| |
| default: |
| wl1271_error("Incorrect ampdu action id=%x\n", action); |
| ret = -EINVAL; |
| } |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static int wl12xx_set_bitrate_mask(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| const struct cfg80211_bitrate_mask *mask) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct wl1271 *wl = hw->priv; |
| int i, ret = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 set_bitrate_mask 0x%x 0x%x", |
| mask->control[NL80211_BAND_2GHZ].legacy, |
| mask->control[NL80211_BAND_5GHZ].legacy); |
| |
| mutex_lock(&wl->mutex); |
| |
| for (i = 0; i < WLCORE_NUM_BANDS; i++) |
| wlvif->bitrate_masks[i] = |
| wl1271_tx_enabled_rates_get(wl, |
| mask->control[i].legacy, |
| i); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| if (wlvif->bss_type == BSS_TYPE_STA_BSS && |
| !test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) { |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl1271_set_band_rate(wl, wlvif); |
| wlvif->basic_rate = |
| wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); |
| ret = wl1271_acx_sta_rate_policies(wl, wlvif); |
| |
| wl1271_ps_elp_sleep(wl); |
| } |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static void wl12xx_op_channel_switch(struct ieee80211_hw *hw, |
| struct ieee80211_channel_switch *ch_switch) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 channel switch"); |
| |
| wl1271_tx_flush(wl); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state == WLCORE_STATE_OFF)) { |
| wl12xx_for_each_wlvif_sta(wl, wlvif) { |
| struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); |
| ieee80211_chswitch_done(vif, false); |
| } |
| goto out; |
| } else if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| /* TODO: change mac80211 to pass vif as param */ |
| wl12xx_for_each_wlvif_sta(wl, wlvif) { |
| unsigned long delay_usec; |
| |
| ret = wl->ops->channel_switch(wl, wlvif, ch_switch); |
| if (ret) |
| goto out_sleep; |
| |
| set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); |
| |
| /* indicate failure 5 seconds after channel switch time */ |
| delay_usec = ieee80211_tu_to_usec(wlvif->beacon_int) * |
| ch_switch->count; |
| ieee80211_queue_delayed_work(hw, &wlvif->channel_switch_work, |
| usecs_to_jiffies(delay_usec) + |
| msecs_to_jiffies(5000)); |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static void wlcore_op_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| u32 queues, bool drop) |
| { |
| struct wl1271 *wl = hw->priv; |
| |
| wl1271_tx_flush(wl); |
| } |
| |
| static int wlcore_op_remain_on_channel(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_channel *chan, |
| int duration, |
| enum ieee80211_roc_type type) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct wl1271 *wl = hw->priv; |
| int channel, ret = 0; |
| |
| channel = ieee80211_frequency_to_channel(chan->center_freq); |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 roc %d (%d)", |
| channel, wlvif->role_id); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| /* return EBUSY if we can't ROC right now */ |
| if (WARN_ON(wl->roc_vif || |
| find_first_bit(wl->roc_map, |
| WL12XX_MAX_ROLES) < WL12XX_MAX_ROLES)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl12xx_start_dev(wl, wlvif, chan->band, channel); |
| if (ret < 0) |
| goto out_sleep; |
| |
| wl->roc_vif = vif; |
| ieee80211_queue_delayed_work(hw, &wl->roc_complete_work, |
| msecs_to_jiffies(duration)); |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| return ret; |
| } |
| |
| static int __wlcore_roc_completed(struct wl1271 *wl) |
| { |
| struct wl12xx_vif *wlvif; |
| int ret; |
| |
| /* already completed */ |
| if (unlikely(!wl->roc_vif)) |
| return 0; |
| |
| wlvif = wl12xx_vif_to_data(wl->roc_vif); |
| |
| if (!test_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags)) |
| return -EBUSY; |
| |
| ret = wl12xx_stop_dev(wl, wlvif); |
| if (ret < 0) |
| return ret; |
| |
| wl->roc_vif = NULL; |
| |
| return 0; |
| } |
| |
| static int wlcore_roc_completed(struct wl1271 *wl) |
| { |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "roc complete"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = __wlcore_roc_completed(wl); |
| |
| wl1271_ps_elp_sleep(wl); |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static void wlcore_roc_complete_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork; |
| struct wl1271 *wl; |
| int ret; |
| |
| dwork = container_of(work, struct delayed_work, work); |
| wl = container_of(dwork, struct wl1271, roc_complete_work); |
| |
| ret = wlcore_roc_completed(wl); |
| if (!ret) |
| ieee80211_remain_on_channel_expired(wl->hw); |
| } |
| |
| static int wlcore_op_cancel_remain_on_channel(struct ieee80211_hw *hw) |
| { |
| struct wl1271 *wl = hw->priv; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 croc"); |
| |
| /* TODO: per-vif */ |
| wl1271_tx_flush(wl); |
| |
| /* |
| * we can't just flush_work here, because it might deadlock |
| * (as we might get called from the same workqueue) |
| */ |
| cancel_delayed_work_sync(&wl->roc_complete_work); |
| wlcore_roc_completed(wl); |
| |
| return 0; |
| } |
| |
| static void wlcore_op_sta_rc_update(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| u32 changed) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct wl1271 *wl = hw->priv; |
| |
| wlcore_hw_sta_rc_update(wl, wlvif, sta, changed); |
| } |
| |
| static int wlcore_op_get_rssi(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| s8 *rssi_dbm) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 get_rssi"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out_sleep; |
| |
| ret = wlcore_acx_average_rssi(wl, wlvif, rssi_dbm); |
| if (ret < 0) |
| goto out_sleep; |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw) |
| { |
| struct wl1271 *wl = hw->priv; |
| bool ret = false; |
| |
| mutex_lock(&wl->mutex); |
| |
| if (unlikely(wl->state != WLCORE_STATE_ON)) |
| goto out; |
| |
| /* packets are considered pending if in the TX queue or the FW */ |
| ret = (wl1271_tx_total_queue_count(wl) > 0) || (wl->tx_frames_cnt > 0); |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| /* can't be const, mac80211 writes to this */ |
| static struct ieee80211_rate wl1271_rates[] = { |
| { .bitrate = 10, |
| .hw_value = CONF_HW_BIT_RATE_1MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_1MBPS, }, |
| { .bitrate = 20, |
| .hw_value = CONF_HW_BIT_RATE_2MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_2MBPS, |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 55, |
| .hw_value = CONF_HW_BIT_RATE_5_5MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS, |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 110, |
| .hw_value = CONF_HW_BIT_RATE_11MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_11MBPS, |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 60, |
| .hw_value = CONF_HW_BIT_RATE_6MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, |
| { .bitrate = 90, |
| .hw_value = CONF_HW_BIT_RATE_9MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, |
| { .bitrate = 120, |
| .hw_value = CONF_HW_BIT_RATE_12MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, |
| { .bitrate = 180, |
| .hw_value = CONF_HW_BIT_RATE_18MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, |
| { .bitrate = 240, |
| .hw_value = CONF_HW_BIT_RATE_24MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, |
| { .bitrate = 360, |
| .hw_value = CONF_HW_BIT_RATE_36MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, |
| { .bitrate = 480, |
| .hw_value = CONF_HW_BIT_RATE_48MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, |
| { .bitrate = 540, |
| .hw_value = CONF_HW_BIT_RATE_54MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, |
| }; |
| |
| /* can't be const, mac80211 writes to this */ |
| static struct ieee80211_channel wl1271_channels[] = { |
| { .hw_value = 1, .center_freq = 2412, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 2, .center_freq = 2417, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 3, .center_freq = 2422, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 4, .center_freq = 2427, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 5, .center_freq = 2432, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 6, .center_freq = 2437, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 7, .center_freq = 2442, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 8, .center_freq = 2447, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 9, .center_freq = 2452, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 10, .center_freq = 2457, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 11, .center_freq = 2462, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 12, .center_freq = 2467, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 13, .center_freq = 2472, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 14, .center_freq = 2484, .max_power = WLCORE_MAX_TXPWR }, |
| }; |
| |
| /* can't be const, mac80211 writes to this */ |
| static struct ieee80211_supported_band wl1271_band_2ghz = { |
| .channels = wl1271_channels, |
| .n_channels = ARRAY_SIZE(wl1271_channels), |
| .bitrates = wl1271_rates, |
| .n_bitrates = ARRAY_SIZE(wl1271_rates), |
| }; |
| |
| /* 5 GHz data rates for WL1273 */ |
| static struct ieee80211_rate wl1271_rates_5ghz[] = { |
| { .bitrate = 60, |
| .hw_value = CONF_HW_BIT_RATE_6MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, |
| { .bitrate = 90, |
| .hw_value = CONF_HW_BIT_RATE_9MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, |
| { .bitrate = 120, |
| .hw_value = CONF_HW_BIT_RATE_12MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, |
| { .bitrate = 180, |
| .hw_value = CONF_HW_BIT_RATE_18MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, |
| { .bitrate = 240, |
| .hw_value = CONF_HW_BIT_RATE_24MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, |
| { .bitrate = 360, |
| .hw_value = CONF_HW_BIT_RATE_36MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, |
| { .bitrate = 480, |
| .hw_value = CONF_HW_BIT_RATE_48MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, |
| { .bitrate = 540, |
| .hw_value = CONF_HW_BIT_RATE_54MBPS, |
| .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, |
| }; |
| |
| /* 5 GHz band channels for WL1273 */ |
| static struct ieee80211_channel wl1271_channels_5ghz[] = { |
| { .hw_value = 8, .center_freq = 5040, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 12, .center_freq = 5060, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 16, .center_freq = 5080, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 34, .center_freq = 5170, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 36, .center_freq = 5180, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 38, .center_freq = 5190, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 40, .center_freq = 5200, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 42, .center_freq = 5210, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 44, .center_freq = 5220, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 46, .center_freq = 5230, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 48, .center_freq = 5240, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 52, .center_freq = 5260, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 56, .center_freq = 5280, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 60, .center_freq = 5300, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 64, .center_freq = 5320, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 100, .center_freq = 5500, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 104, .center_freq = 5520, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 108, .center_freq = 5540, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 112, .center_freq = 5560, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 116, .center_freq = 5580, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 120, .center_freq = 5600, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 124, .center_freq = 5620, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 128, .center_freq = 5640, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 132, .center_freq = 5660, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 136, .center_freq = 5680, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 140, .center_freq = 5700, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 149, .center_freq = 5745, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 153, .center_freq = 5765, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 157, .center_freq = 5785, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 161, .center_freq = 5805, .max_power = WLCORE_MAX_TXPWR }, |
| { .hw_value = 165, .center_freq = 5825, .max_power = WLCORE_MAX_TXPWR }, |
| }; |
| |
| static struct ieee80211_supported_band wl1271_band_5ghz = { |
| .channels = wl1271_channels_5ghz, |
| .n_channels = ARRAY_SIZE(wl1271_channels_5ghz), |
| .bitrates = wl1271_rates_5ghz, |
| .n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz), |
| }; |
| |
| static const struct ieee80211_ops wl1271_ops = { |
| .start = wl1271_op_start, |
| .stop = wlcore_op_stop, |
| .add_interface = wl1271_op_add_interface, |
| .remove_interface = wl1271_op_remove_interface, |
| .change_interface = wl12xx_op_change_interface, |
| #ifdef CONFIG_PM |
| .suspend = wl1271_op_suspend, |
| .resume = wl1271_op_resume, |
| #endif |
| .config = wl1271_op_config, |
| .prepare_multicast = wl1271_op_prepare_multicast, |
| .configure_filter = wl1271_op_configure_filter, |
| .tx = wl1271_op_tx, |
| .set_key = wlcore_op_set_key, |
| .hw_scan = wl1271_op_hw_scan, |
| .cancel_hw_scan = wl1271_op_cancel_hw_scan, |
| .sched_scan_start = wl1271_op_sched_scan_start, |
| .sched_scan_stop = wl1271_op_sched_scan_stop, |
| .bss_info_changed = wl1271_op_bss_info_changed, |
| .set_frag_threshold = wl1271_op_set_frag_threshold, |
| .set_rts_threshold = wl1271_op_set_rts_threshold, |
| .conf_tx = wl1271_op_conf_tx, |
| .get_tsf = wl1271_op_get_tsf, |
| .get_survey = wl1271_op_get_survey, |
| .sta_state = wl12xx_op_sta_state, |
| .ampdu_action = wl1271_op_ampdu_action, |
| .tx_frames_pending = wl1271_tx_frames_pending, |
| .set_bitrate_mask = wl12xx_set_bitrate_mask, |
| .set_default_unicast_key = wl1271_op_set_default_key_idx, |
| .channel_switch = wl12xx_op_channel_switch, |
| .flush = wlcore_op_flush, |
| .remain_on_channel = wlcore_op_remain_on_channel, |
| .cancel_remain_on_channel = wlcore_op_cancel_remain_on_channel, |
| .add_chanctx = wlcore_op_add_chanctx, |
| .remove_chanctx = wlcore_op_remove_chanctx, |
| .change_chanctx = wlcore_op_change_chanctx, |
| .assign_vif_chanctx = wlcore_op_assign_vif_chanctx, |
| .unassign_vif_chanctx = wlcore_op_unassign_vif_chanctx, |
| .sta_rc_update = wlcore_op_sta_rc_update, |
| .get_rssi = wlcore_op_get_rssi, |
| CFG80211_TESTMODE_CMD(wl1271_tm_cmd) |
| }; |
| |
| |
| u8 wlcore_rate_to_idx(struct wl1271 *wl, u8 rate, enum ieee80211_band band) |
| { |
| u8 idx; |
| |
| BUG_ON(band >= 2); |
| |
| if (unlikely(rate >= wl->hw_tx_rate_tbl_size)) { |
| wl1271_error("Illegal RX rate from HW: %d", rate); |
| return 0; |
| } |
| |
| idx = wl->band_rate_to_idx[band][rate]; |
| if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) { |
| wl1271_error("Unsupported RX rate from HW: %d", rate); |
| return 0; |
| } |
| |
| return idx; |
| } |
| |
| static void wl12xx_derive_mac_addresses(struct wl1271 *wl, u32 oui, u32 nic) |
| { |
| int i; |
| |
| wl1271_debug(DEBUG_PROBE, "base address: oui %06x nic %06x", |
| oui, nic); |
| |
| if (nic + WLCORE_NUM_MAC_ADDRESSES - wl->num_mac_addr > 0xffffff) |
| wl1271_warning("NIC part of the MAC address wraps around!"); |
| |
| for (i = 0; i < wl->num_mac_addr; i++) { |
| wl->addresses[i].addr[0] = (u8)(oui >> 16); |
| wl->addresses[i].addr[1] = (u8)(oui >> 8); |
| wl->addresses[i].addr[2] = (u8) oui; |
| wl->addresses[i].addr[3] = (u8)(nic >> 16); |
| wl->addresses[i].addr[4] = (u8)(nic >> 8); |
| wl->addresses[i].addr[5] = (u8) nic; |
| nic++; |
| } |
| |
| /* we may be one address short at the most */ |
| WARN_ON(wl->num_mac_addr + 1 < WLCORE_NUM_MAC_ADDRESSES); |
| |
| /* |
| * turn on the LAA bit in the first address and use it as |
| * the last address. |
| */ |
| if (wl->num_mac_addr < WLCORE_NUM_MAC_ADDRESSES) { |
| int idx = WLCORE_NUM_MAC_ADDRESSES - 1; |
| memcpy(&wl->addresses[idx], &wl->addresses[0], |
| sizeof(wl->addresses[0])); |
| /* LAA bit */ |
| wl->addresses[idx].addr[2] |= BIT(1); |
| } |
| |
| wl->hw->wiphy->n_addresses = WLCORE_NUM_MAC_ADDRESSES; |
| wl->hw->wiphy->addresses = wl->addresses; |
| } |
| |
| static int wl12xx_get_hw_info(struct wl1271 *wl) |
| { |
| int ret; |
| |
| ret = wl12xx_set_power_on(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &wl->chip.id); |
| if (ret < 0) |
| goto out; |
| |
| wl->fuse_oui_addr = 0; |
| wl->fuse_nic_addr = 0; |
| |
| ret = wl->ops->get_pg_ver(wl, &wl->hw_pg_ver); |
| if (ret < 0) |
| goto out; |
| |
| if (wl->ops->get_mac) |
| ret = wl->ops->get_mac(wl); |
| |
| out: |
| wl1271_power_off(wl); |
| return ret; |
| } |
| |
| static int wl1271_register_hw(struct wl1271 *wl) |
| { |
| int ret; |
| u32 oui_addr = 0, nic_addr = 0; |
| |
| if (wl->mac80211_registered) |
| return 0; |
| |
| if (wl->nvs_len >= 12) { |
| /* NOTE: The wl->nvs->nvs element must be first, in |
| * order to simplify the casting, we assume it is at |
| * the beginning of the wl->nvs structure. |
| */ |
| u8 *nvs_ptr = (u8 *)wl->nvs; |
| |
| oui_addr = |
| (nvs_ptr[11] << 16) + (nvs_ptr[10] << 8) + nvs_ptr[6]; |
| nic_addr = |
| (nvs_ptr[5] << 16) + (nvs_ptr[4] << 8) + nvs_ptr[3]; |
| } |
| |
| /* if the MAC address is zeroed in the NVS derive from fuse */ |
| if (oui_addr == 0 && nic_addr == 0) { |
| oui_addr = wl->fuse_oui_addr; |
| /* fuse has the BD_ADDR, the WLAN addresses are the next two */ |
| nic_addr = wl->fuse_nic_addr + 1; |
| } |
| |
| wl12xx_derive_mac_addresses(wl, oui_addr, nic_addr); |
| |
| ret = ieee80211_register_hw(wl->hw); |
| if (ret < 0) { |
| wl1271_error("unable to register mac80211 hw: %d", ret); |
| goto out; |
| } |
| |
| wl->mac80211_registered = true; |
| |
| wl1271_debugfs_init(wl); |
| |
| wl1271_notice("loaded"); |
| |
| out: |
| return ret; |
| } |
| |
| static void wl1271_unregister_hw(struct wl1271 *wl) |
| { |
| if (wl->plt) |
| wl1271_plt_stop(wl); |
| |
| ieee80211_unregister_hw(wl->hw); |
| wl->mac80211_registered = false; |
| |
| } |
| |
| static int wl1271_init_ieee80211(struct wl1271 *wl) |
| { |
| int i; |
| static const u32 cipher_suites[] = { |
| WLAN_CIPHER_SUITE_WEP40, |
| WLAN_CIPHER_SUITE_WEP104, |
| WLAN_CIPHER_SUITE_TKIP, |
| WLAN_CIPHER_SUITE_CCMP, |
| WL1271_CIPHER_SUITE_GEM, |
| }; |
| |
| /* The tx descriptor buffer */ |
| wl->hw->extra_tx_headroom = sizeof(struct wl1271_tx_hw_descr); |
| |
| if (wl->quirks & WLCORE_QUIRK_TKIP_HEADER_SPACE) |
| wl->hw->extra_tx_headroom += WL1271_EXTRA_SPACE_TKIP; |
| |
| /* unit us */ |
| /* FIXME: find a proper value */ |
| wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; |
| |
| wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_SUPPORTS_PS | |
| IEEE80211_HW_SUPPORTS_DYNAMIC_PS | |
| IEEE80211_HW_SUPPORTS_UAPSD | |
| IEEE80211_HW_HAS_RATE_CONTROL | |
| IEEE80211_HW_CONNECTION_MONITOR | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS | |
| IEEE80211_HW_SPECTRUM_MGMT | |
| IEEE80211_HW_AP_LINK_PS | |
| IEEE80211_HW_AMPDU_AGGREGATION | |
| IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | |
| IEEE80211_HW_QUEUE_CONTROL | |
| IEEE80211_HW_CHANCTX_STA_CSA; |
| |
| wl->hw->wiphy->cipher_suites = cipher_suites; |
| wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); |
| |
| wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO); |
| wl->hw->wiphy->max_scan_ssids = 1; |
| wl->hw->wiphy->max_sched_scan_ssids = 16; |
| wl->hw->wiphy->max_match_sets = 16; |
| /* |
| * Maximum length of elements in scanning probe request templates |
| * should be the maximum length possible for a template, without |
| * the IEEE80211 header of the template |
| */ |
| wl->hw->wiphy->max_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE - |
| sizeof(struct ieee80211_header); |
| |
| wl->hw->wiphy->max_sched_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE - |
| sizeof(struct ieee80211_header); |
| |
| wl->hw->wiphy->max_remain_on_channel_duration = 5000; |
| |
| wl->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD | |
| WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | |
| WIPHY_FLAG_SUPPORTS_SCHED_SCAN; |
| |
| /* make sure all our channels fit in the scanned_ch bitmask */ |
| BUILD_BUG_ON(ARRAY_SIZE(wl1271_channels) + |
| ARRAY_SIZE(wl1271_channels_5ghz) > |
| WL1271_MAX_CHANNELS); |
| /* |
| * clear channel flags from the previous usage |
| * and restore max_power & max_antenna_gain values. |
| */ |
| for (i = 0; i < ARRAY_SIZE(wl1271_channels); i++) { |
| wl1271_band_2ghz.channels[i].flags = 0; |
| wl1271_band_2ghz.channels[i].max_power = WLCORE_MAX_TXPWR; |
| wl1271_band_2ghz.channels[i].max_antenna_gain = 0; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wl1271_channels_5ghz); i++) { |
| wl1271_band_5ghz.channels[i].flags = 0; |
| wl1271_band_5ghz.channels[i].max_power = WLCORE_MAX_TXPWR; |
| wl1271_band_5ghz.channels[i].max_antenna_gain = 0; |
| } |
| |
| /* |
| * We keep local copies of the band structs because we need to |
| * modify them on a per-device basis. |
| */ |
| memcpy(&wl->bands[IEEE80211_BAND_2GHZ], &wl1271_band_2ghz, |
| sizeof(wl1271_band_2ghz)); |
| memcpy(&wl->bands[IEEE80211_BAND_2GHZ].ht_cap, |
| &wl->ht_cap[IEEE80211_BAND_2GHZ], |
| sizeof(*wl->ht_cap)); |
| memcpy(&wl->bands[IEEE80211_BAND_5GHZ], &wl1271_band_5ghz, |
| sizeof(wl1271_band_5ghz)); |
| memcpy(&wl->bands[IEEE80211_BAND_5GHZ].ht_cap, |
| &wl->ht_cap[IEEE80211_BAND_5GHZ], |
| sizeof(*wl->ht_cap)); |
| |
| wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = |
| &wl->bands[IEEE80211_BAND_2GHZ]; |
| wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = |
| &wl->bands[IEEE80211_BAND_5GHZ]; |
| |
| /* |
| * allow 4 queues per mac address we support + |
| * 1 cab queue per mac + one global offchannel Tx queue |
| */ |
| wl->hw->queues = (NUM_TX_QUEUES + 1) * WLCORE_NUM_MAC_ADDRESSES + 1; |
| |
| /* the last queue is the offchannel queue */ |
| wl->hw->offchannel_tx_hw_queue = wl->hw->queues - 1; |
| wl->hw->max_rates = 1; |
| |
| wl->hw->wiphy->reg_notifier = wl1271_reg_notify; |
| |
| /* the FW answers probe-requests in AP-mode */ |
| wl->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; |
| wl->hw->wiphy->probe_resp_offload = |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; |
| |
| /* allowed interface combinations */ |
| wl->hw->wiphy->iface_combinations = wl->iface_combinations; |
| wl->hw->wiphy->n_iface_combinations = wl->n_iface_combinations; |
| |
| SET_IEEE80211_DEV(wl->hw, wl->dev); |
| |
| wl->hw->sta_data_size = sizeof(struct wl1271_station); |
| wl->hw->vif_data_size = sizeof(struct wl12xx_vif); |
| |
| wl->hw->max_rx_aggregation_subframes = wl->conf.ht.rx_ba_win_size; |
| |
| return 0; |
| } |
| |
| struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, |
| u32 mbox_size) |
| { |
| struct ieee80211_hw *hw; |
| struct wl1271 *wl; |
| int i, j, ret; |
| unsigned int order; |
| |
| hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops); |
| if (!hw) { |
| wl1271_error("could not alloc ieee80211_hw"); |
| ret = -ENOMEM; |
| goto err_hw_alloc; |
| } |
| |
| wl = hw->priv; |
| memset(wl, 0, sizeof(*wl)); |
| |
| wl->priv = kzalloc(priv_size, GFP_KERNEL); |
| if (!wl->priv) { |
| wl1271_error("could not alloc wl priv"); |
| ret = -ENOMEM; |
| goto err_priv_alloc; |
| } |
| |
| INIT_LIST_HEAD(&wl->wlvif_list); |
| |
| wl->hw = hw; |
| |
| /* |
| * wl->num_links is not configured yet, so just use WLCORE_MAX_LINKS. |
| * we don't allocate any additional resource here, so that's fine. |
| */ |
| for (i = 0; i < NUM_TX_QUEUES; i++) |
| for (j = 0; j < WLCORE_MAX_LINKS; j++) |
| skb_queue_head_init(&wl->links[j].tx_queue[i]); |
| |
| skb_queue_head_init(&wl->deferred_rx_queue); |
| skb_queue_head_init(&wl->deferred_tx_queue); |
| |
| INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work); |
| INIT_WORK(&wl->netstack_work, wl1271_netstack_work); |
| INIT_WORK(&wl->tx_work, wl1271_tx_work); |
| INIT_WORK(&wl->recovery_work, wl1271_recovery_work); |
| INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); |
| INIT_DELAYED_WORK(&wl->roc_complete_work, wlcore_roc_complete_work); |
| INIT_DELAYED_WORK(&wl->tx_watchdog_work, wl12xx_tx_watchdog_work); |
| |
| wl->freezable_wq = create_freezable_workqueue("wl12xx_wq"); |
| if (!wl->freezable_wq) { |
| ret = -ENOMEM; |
| goto err_hw; |
| } |
| |
| wl->channel = 0; |
| wl->rx_counter = 0; |
| wl->power_level = WL1271_DEFAULT_POWER_LEVEL; |
| wl->band = IEEE80211_BAND_2GHZ; |
| wl->channel_type = NL80211_CHAN_NO_HT; |
| wl->flags = 0; |
| wl->sg_enabled = true; |
| wl->sleep_auth = WL1271_PSM_ILLEGAL; |
| wl->recovery_count = 0; |
| wl->hw_pg_ver = -1; |
| wl->ap_ps_map = 0; |
| wl->ap_fw_ps_map = 0; |
| wl->quirks = 0; |
| wl->platform_quirks = 0; |
| wl->system_hlid = WL12XX_SYSTEM_HLID; |
| wl->active_sta_count = 0; |
| wl->active_link_count = 0; |
| wl->fwlog_size = 0; |
| init_waitqueue_head(&wl->fwlog_waitq); |
| |
| /* The system link is always allocated */ |
| __set_bit(WL12XX_SYSTEM_HLID, wl->links_map); |
| |
| memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map)); |
| for (i = 0; i < wl->num_tx_desc; i++) |
| wl->tx_frames[i] = NULL; |
| |
| spin_lock_init(&wl->wl_lock); |
| |
| wl->state = WLCORE_STATE_OFF; |
| wl->fw_type = WL12XX_FW_TYPE_NONE; |
| mutex_init(&wl->mutex); |
| mutex_init(&wl->flush_mutex); |
| init_completion(&wl->nvs_loading_complete); |
| |
| order = get_order(aggr_buf_size); |
| wl->aggr_buf = (u8 *)__get_free_pages(GFP_KERNEL, order); |
| if (!wl->aggr_buf) { |
| ret = -ENOMEM; |
| goto err_wq; |
| } |
| wl->aggr_buf_size = aggr_buf_size; |
| |
| wl->dummy_packet = wl12xx_alloc_dummy_packet(wl); |
| if (!wl->dummy_packet) { |
| ret = -ENOMEM; |
| goto err_aggr; |
| } |
| |
| /* Allocate one page for the FW log */ |
| wl->fwlog = (u8 *)get_zeroed_page(GFP_KERNEL); |
| if (!wl->fwlog) { |
| ret = -ENOMEM; |
| goto err_dummy_packet; |
| } |
| |
| wl->mbox_size = mbox_size; |
| wl->mbox = kmalloc(wl->mbox_size, GFP_KERNEL | GFP_DMA); |
| if (!wl->mbox) { |
| ret = -ENOMEM; |
| goto err_fwlog; |
| } |
| |
| wl->buffer_32 = kmalloc(sizeof(*wl->buffer_32), GFP_KERNEL); |
| if (!wl->buffer_32) { |
| ret = -ENOMEM; |
| goto err_mbox; |
| } |
| |
| return hw; |
| |
| err_mbox: |
| kfree(wl->mbox); |
| |
| err_fwlog: |
| free_page((unsigned long)wl->fwlog); |
| |
| err_dummy_packet: |
| dev_kfree_skb(wl->dummy_packet); |
| |
| err_aggr: |
| free_pages((unsigned long)wl->aggr_buf, order); |
| |
| err_wq: |
| destroy_workqueue(wl->freezable_wq); |
| |
| err_hw: |
| wl1271_debugfs_exit(wl); |
| kfree(wl->priv); |
| |
| err_priv_alloc: |
| ieee80211_free_hw(hw); |
| |
| err_hw_alloc: |
| |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(wlcore_alloc_hw); |
| |
| int wlcore_free_hw(struct wl1271 *wl) |
| { |
| /* Unblock any fwlog readers */ |
| mutex_lock(&wl->mutex); |
| wl->fwlog_size = -1; |
| wake_up_interruptible_all(&wl->fwlog_waitq); |
| mutex_unlock(&wl->mutex); |
| |
| wlcore_sysfs_free(wl); |
| |
| kfree(wl->buffer_32); |
| kfree(wl->mbox); |
| free_page((unsigned long)wl->fwlog); |
| dev_kfree_skb(wl->dummy_packet); |
| free_pages((unsigned long)wl->aggr_buf, get_order(wl->aggr_buf_size)); |
| |
| wl1271_debugfs_exit(wl); |
| |
| vfree(wl->fw); |
| wl->fw = NULL; |
| wl->fw_type = WL12XX_FW_TYPE_NONE; |
| kfree(wl->nvs); |
| wl->nvs = NULL; |
| |
| kfree(wl->raw_fw_status); |
| kfree(wl->fw_status); |
| kfree(wl->tx_res_if); |
| destroy_workqueue(wl->freezable_wq); |
| |
| kfree(wl->priv); |
| ieee80211_free_hw(wl->hw); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wlcore_free_hw); |
| |
| #ifdef CONFIG_PM |
| static const struct wiphy_wowlan_support wlcore_wowlan_support = { |
| .flags = WIPHY_WOWLAN_ANY, |
| .n_patterns = WL1271_MAX_RX_FILTERS, |
| .pattern_min_len = 1, |
| .pattern_max_len = WL1271_RX_FILTER_MAX_PATTERN_SIZE, |
| }; |
| #endif |
| |
| static irqreturn_t wlcore_hardirq(int irq, void *cookie) |
| { |
| return IRQ_WAKE_THREAD; |
| } |
| |
| static void wlcore_nvs_cb(const struct firmware *fw, void *context) |
| { |
| struct wl1271 *wl = context; |
| struct platform_device *pdev = wl->pdev; |
| struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); |
| struct wl12xx_platform_data *pdata = pdev_data->pdata; |
| unsigned long irqflags; |
| int ret; |
| irq_handler_t hardirq_fn = NULL; |
| |
| if (fw) { |
| wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL); |
| if (!wl->nvs) { |
| wl1271_error("Could not allocate nvs data"); |
| goto out; |
| } |
| wl->nvs_len = fw->size; |
| } else { |
| wl1271_debug(DEBUG_BOOT, "Could not get nvs file %s", |
| WL12XX_NVS_NAME); |
| wl->nvs = NULL; |
| wl->nvs_len = 0; |
| } |
| |
| ret = wl->ops->setup(wl); |
| if (ret < 0) |
| goto out_free_nvs; |
| |
| BUG_ON(wl->num_tx_desc > WLCORE_MAX_TX_DESCRIPTORS); |
| |
| /* adjust some runtime configuration parameters */ |
| wlcore_adjust_conf(wl); |
| |
| wl->irq = platform_get_irq(pdev, 0); |
| wl->platform_quirks = pdata->platform_quirks; |
| wl->if_ops = pdev_data->if_ops; |
| |
| if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) { |
| irqflags = IRQF_TRIGGER_RISING; |
| hardirq_fn = wlcore_hardirq; |
| } else { |
| irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT; |
| } |
| |
| ret = request_threaded_irq(wl->irq, hardirq_fn, wlcore_irq, |
| irqflags, pdev->name, wl); |
| if (ret < 0) { |
| wl1271_error("request_irq() failed: %d", ret); |
| goto out_free_nvs; |
| } |
| |
| #ifdef CONFIG_PM |
| ret = enable_irq_wake(wl->irq); |
| if (!ret) { |
| wl->irq_wake_enabled = true; |
| device_init_wakeup(wl->dev, 1); |
| if (pdata->pwr_in_suspend) |
| wl->hw->wiphy->wowlan = &wlcore_wowlan_support; |
| } |
| #endif |
| disable_irq(wl->irq); |
| |
| ret = wl12xx_get_hw_info(wl); |
| if (ret < 0) { |
| wl1271_error("couldn't get hw info"); |
| goto out_irq; |
| } |
| |
| ret = wl->ops->identify_chip(wl); |
| if (ret < 0) |
| goto out_irq; |
| |
| ret = wl1271_init_ieee80211(wl); |
| if (ret) |
| goto out_irq; |
| |
| ret = wl1271_register_hw(wl); |
| if (ret) |
| goto out_irq; |
| |
| ret = wlcore_sysfs_init(wl); |
| if (ret) |
| goto out_unreg; |
| |
| wl->initialized = true; |
| goto out; |
| |
| out_unreg: |
| wl1271_unregister_hw(wl); |
| |
| out_irq: |
| free_irq(wl->irq, wl); |
| |
| out_free_nvs: |
| kfree(wl->nvs); |
| |
| out: |
| release_firmware(fw); |
| complete_all(&wl->nvs_loading_complete); |
| } |
| |
| int wlcore_probe(struct wl1271 *wl, struct platform_device *pdev) |
| { |
| int ret; |
| |
| if (!wl->ops || !wl->ptable) |
| return -EINVAL; |
| |
| wl->dev = &pdev->dev; |
| wl->pdev = pdev; |
| platform_set_drvdata(pdev, wl); |
| |
| ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, |
| WL12XX_NVS_NAME, &pdev->dev, GFP_KERNEL, |
| wl, wlcore_nvs_cb); |
| if (ret < 0) { |
| wl1271_error("request_firmware_nowait failed: %d", ret); |
| complete_all(&wl->nvs_loading_complete); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wlcore_probe); |
| |
| int wlcore_remove(struct platform_device *pdev) |
| { |
| struct wl1271 *wl = platform_get_drvdata(pdev); |
| |
| wait_for_completion(&wl->nvs_loading_complete); |
| if (!wl->initialized) |
| return 0; |
| |
| if (wl->irq_wake_enabled) { |
| device_init_wakeup(wl->dev, 0); |
| disable_irq_wake(wl->irq); |
| } |
| wl1271_unregister_hw(wl); |
| free_irq(wl->irq, wl); |
| wlcore_free_hw(wl); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wlcore_remove); |
| |
| u32 wl12xx_debug_level = DEBUG_NONE; |
| EXPORT_SYMBOL_GPL(wl12xx_debug_level); |
| module_param_named(debug_level, wl12xx_debug_level, uint, S_IRUSR | S_IWUSR); |
| MODULE_PARM_DESC(debug_level, "wl12xx debugging level"); |
| |
| module_param_named(fwlog, fwlog_param, charp, 0); |
| MODULE_PARM_DESC(fwlog, |
| "FW logger options: continuous, ondemand, dbgpins or disable"); |
| |
| module_param(fwlog_mem_blocks, int, S_IRUSR | S_IWUSR); |
| MODULE_PARM_DESC(fwlog_mem_blocks, "fwlog mem_blocks"); |
| |
| module_param(bug_on_recovery, int, S_IRUSR | S_IWUSR); |
| MODULE_PARM_DESC(bug_on_recovery, "BUG() on fw recovery"); |
| |
| module_param(no_recovery, int, S_IRUSR | S_IWUSR); |
| MODULE_PARM_DESC(no_recovery, "Prevent HW recovery. FW will remain stuck."); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |
| MODULE_FIRMWARE(WL12XX_NVS_NAME); |